134107.300: root@TinaLinux:/# 
134107.482: root@TinaLinux:/# 
134107.662: root@TinaLinux:/# 
134108.160: root@TinaLinux:/# 
134108.190: root@TinaLinux:/# 
134108.221: root@TinaLinux:/# 
134108.297: root@TinaLinux:/# 
134108.297: root@TinaLinux:/# 
134108.297: root@TinaLinux:/# 
134108.328: root@TinaLinux:/# 
134108.358: root@TinaLinux:/# 
134108.388: root@TinaLinux:/# 
134108.418: root@TinaLinux:/# 
134108.448: root@TinaLinux:/# 
134108.540: root@TinaLinux:/# 
134108.540: root@TinaLinux:/# 
134108.540: root@TinaLinux:/# 
134108.571: root@TinaLinux:/# 
134108.601: root@TinaLinux:/# 
134108.631: root@TinaLinux:/# 
134108.661: root@TinaLinux:/# 
134108.692: root@TinaLinux:/# 
134108.755: root@TinaLinux:/# 
134108.755: root@TinaLinux:/# 
134108.767: root@TinaLinux:/# 
134108.812: root@TinaLinux:/# 
134108.842: root@TinaLinux:/# 
134108.872: root@TinaLinux:/# 
134108.904: root@TinaLinux:/# 
134108.933: root@TinaLinux:/# 
134108.963: root@TinaLinux:/# 
134119.827: root@TinaLinux:/# [   29.921697] random: crng init done
134119.828: [   29.925529] random: 2 urandom warning(s) missed due to ratelimiting
134123.042: [   33.135525] android_work: sent uevent USB_STATE=DISCONNECTED
134123.042: [   33.144021] store rtc flag 0x5a
134123.043: [   33.148543] android_work: did not send uevent (0 0   (null))
134123.059: starting pid 1154, tty '': '/etc/init.d/rcK'
134123.059: /etc/init.d/rcK: line 7: /etc/init.d/S01app: not found
134123.087: Not defined "stop" functions!!!
134123.087: Stopping wifi_deamon: Stopping telnetd: FAIL
134123.151: rm: can't remove '/var/run/dbus.pid': No such file or directory
134123.152: Stopping network: FAIL
134123.194: Saving random seed... done.
134123.195: stop...
134123.195: killall: udevd: no process killed
134123.241: Stopping audio: playing '/home/res/audio/shutdown.wav': 2 ch, 48000 hz, 16 bit
134124.571: Successfully play shutdown music
134124.572: Stopping logging: OK
134124.625: Unload mpp modules
134124.625: rmmod: can't unload module 'sunxi_eise': No such file or directory
134124.626: rmmod: can't unload module 'sunxi_aio': No such file or directory
134124.626: rmmod: can't unload module 'vin_v4l2': Resource temporarily unavailable
134124.627: rmmod: can't unload module 'vin_io': Resource temporarily unavailable
134124.627: rmmod: can't unload module 'videobuf2_v4l2': Resource temporarily unavailable
134124.628: rmmod: can't unload module 'videobuf2_dma_contig': Resource temporarily unavailable
134124.628: rmmod: can't unload module 'videobuf2_memops': Resource temporarily unavailable
134124.628: rmmod: can't unload module 'videobuf2_core': Resource temporarily unavailable
134124.628: starting pid 1205, tty '': '/sbin/swapoff -a'
134124.628: can't run '/sbin/swapoff': No such file or directory
134124.644: starting pid 1206, tty '': '/bin/umount -a -r'
134124.691: [   34.787884] ffs_data_put(): freeing
134124.933: umount: can't remount tmpfs read-only
134124.933: umount: devtmpfs busy - remounted read-only
134125.011: The system is going down NOW!
134125.012: Sent SIGTERM to all processes[   35.070713] [DISP] disp_mgr_set_layer_config,line:1504:
134125.012: wlan0: Do not deauthenticate a
134125.013: [   35.079671] NULL hdl!
134125.013: s part of interface deinit since WoWLAN is enabled
134125.014: E0101 00:00:37.327722  1140 glog_helper.cpp:16] *** Aborted at 37 (unix time) try "date -d @37" if you are using GNU date ***
134125.015: E0101 00:00:37.328029  1140 glog_helper.cpp:16] PC: @        0x0 (unknown)
134125.015: CTRL_IFACE: Detach monitor that c[   35.107797] [ICN6202 TO LVDS] LINE:0152-->lcd_close_flow:
134125.015: annot receive messages: /tmp/wpa[   35.115803] [ICN6202 TO LVDS] LINE:0206-->lcd_bl_close:
134125.015: _ctrl_1046-2\x00
134125.020: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
134125.040: [   35.147780] [STA_WRN] !!! xradio_remove_interface: vif_id=0
134125.040: wlan0: CTRL-EVENT-TERMINATING 
134125.051: rmdir[ctrl_interface=/etc/wifi/wpa_supplicant/sockets]: Read-only file system
134125.221: [   35.327759] [ICN6202 TO LVDS] LINE:0185-->lcd_power_off:
134125.326: [   35.427970] [DISP] de_fcm_set_para,line:491:
134125.326: [   35.432571] fcm lut 0 not find, auto retry after init
134125.327: [   35.438602] [DISP] de_fcm_set_para,line:491:
134125.341: [   35.443197] fcm lut 0 not find, auto retry after init
134126.007: Requesting system reboot
134127.165: [   37.177315] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
134127.166: [   37.188699] [alarmtimer] have no shutdown alarm! alarmtimer_shutdown 322
134127.166: [   37.197223] [VIN_WARN]video13 device have been closed!
134127.166: [   37.203037] [VIN_WARN]video12 device have been closed!
134127.167: [   37.208821] [VIN_WARN]video9 device have been closed!
134127.167: [   37.214495] [VIN_WARN]video8 device have been closed!
134127.167: [   37.220182] [VIN_WARN]video5 device have been closed!
134127.168: [   37.225856] [VIN_WARN]video4 device have been closed!
134127.169: [   37.231541] [VIN_WARN]video1 device have been closed!
134127.169: [   37.237215] [VIN_WARN]video0 device have been closed!
134127.169: [   37.243068] sunxi_ohci_hcd_shutdown, ohci0-controller is disable, need not shutdown
134127.169: [   37.251701] sunxi_ehci_hcd_shutdown, ehci0-controller is disable, need not shutdown
134127.169: [   37.260474] reboot: Restarting system
134127.169: [   37.264586] 
134127.174: [   37.266257] Restarting Linux version 4.9.191 (snake@dell-PowerEdge-R730) (gcc version 6.4.1 (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) ) #30 PREEMPT Thu Jul 7 02:59:49 UTC 2022
134127.174: [   37.266257] 
134128.318: [50]HELLO! BOOT0 is starting!
134128.318: [52]BOOT0 commit : 8433e8ed75
134128.318: [55]set pll start
134128.319: [57]periph0 has been enabled
134128.319: [60]set pll end
134128.319: [63]PMU: AXP21
134128.319: [65]board init ok
134128.320: [67]rtc[0] value = 0x80000001
134128.320: [70]DRAM use external ZQ!!
134128.320: [73]DRAM_VCC set to 1500 mv
134128.320: [75]DRAM BOOT DRIVE INFO: V0.15
134128.320: [78]DRAM CLK = 936 MHz
134128.321: [80]DRAM Type = 3 (2:DDR2,3:DDR3)
134128.321: [84]DRAMC ZQ value: 0x7b7bfb
134128.321: [86]DRAM ODT value: 0x42.
134128.321: [90]DRAM SIZE =512 M
134128.321: [92]dram_tpr4:0x0
134128.321: [98]DRAM simple test OK.
134128.321: [100]rtc standby flag is 0x0, super standby flag is 0x0
134128.321: [105]dram size =512
134128.321: [108]audio:avcc calibration
134128.321: [111]card no is 2
134128.321: [112]sdcard 2 line count 8
134128.321: [115][mmc]: mmc driver ver 2021-12-27 10:07
134128.322: [124][mmc]: Wrong media type 0x0, but host sdc2, try mmc first
134128.322: [130][mmc]: ***Try MMC card 2***
134128.333: [145][mmc]: RMCA OK!
134128.343: [147][mmc]: bias 100
134128.343: [149][mmc]: mmc 2 bias 100
134128.344: [152][mmc]: MMC 5.1
134128.344: [154][mmc]: HSSDR52/SDR25 8 bit
134128.344: [157][mmc]: 50000000 Hz
134128.348: [159][mmc]: 7400 MB
134128.348: [161][mmc]: ***SD/MMC 2 init OK!!!***
134128.440: [213]Loading boot-pkg Succeed(index=0).
134128.441: [217]Entry_name        = optee
134128.441: [220]Entry_name        = u-boot
134128.441: [227]Entry_name        = dtb
134128.442: [230]tunning data addr:0x430003e8
134128.442: [233]Jump to second Boot.
134128.454: M/TC: OP-TEE version: 15ee1539b (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Tue Mar 29 06:48:41 UTC 2022 arm
134128.592: 
134128.592: 
134128.595: U-Boot 2018.05-g784cc3a-dirty-config-dirty (Jul 06 2022 - 12:09:47 +0800) Allwinner Technology
134128.596: 
134128.596: [00.404]CPU:   Allwinner Family
134128.596: [00.407]Model: sun8iw21
134128.667: I2C:   ready
134128.668: [00.433]DRAM:  512 MiB
134128.668: [00.436]Relocation Offset is: 1ced2000
134128.668: [00.460]secure enable bit: 0
134128.715: E/TC:0   fdt_getprop_u32:343 prop trace_level not found
134128.715: [00.475]PMU: AXP21
134128.715: [00.476]BMU: AXP21
134128.716: FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
134128.716: bias_name:pc_bias        bias_vol:1800
134128.717: bias_name:pi_bias        bias_vol:1800
134128.717: [00.500]CPU=900 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=24Mhz  MBus=300Mhz
134128.717: [00.506]gic: sec monitor mode
134128.717: [00.509]flash init start
134128.718: [00.511]workmode = 0,storage type = 2
134128.718: [00.514][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
134128.726: [00.520][mmc]: get sdc_type fail and use default host:tm4.
134128.726: [00.527][mmc]: SUNXI SDMMC Controller Version:0x50400
134128.800: [00.554][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 8
134128.800: [00.561]sunxi flash init ok
134128.801: [00.563]line:724 init_clocks
134128.801: [00.567]drv_disp_init
134128.802: request pwm success, pwm9:pwm9:0x2000c00.
134128.802: [00.581]drv_disp_init finish
134128.802: [00.585]Loading Environment from SUNXI_FLASH... OK
134128.803: [00.596]boot_gui_init:start
134128.803: [00.599]set disp.dev2_output_type fail. using defval=0
134128.804: [00.604][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow:
134128.804: [00.609][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow:
134128.817: [00.613][ICN6202 TO LVDS] LINE:0167-->lcd_power_on:
134128.837: [00.631]boot_gui_init:finish
134128.838: partno erro : can't find partition bootloader
134128.838: 54 bytes read in 0 ms
134128.848: [00.640]bmp_name=bootlogo.bmp size 38454
134128.848: [00.644][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow:
134128.849: [00.649][ICN6202 TO LVDS] LINE:0575-->lcd_panel_init:
134129.022: [00.815][ICN6202 TO LVDS] LINE:0620-->lcd_panel_init:initialization:icn6202 init reg from mipi
134129.031: 38454 bytes read in 192 ms (195.3 KiB/s)
134129.061: [00.855]Item0 (Map) magic is bad
134129.062: [00.858]the secure storage item0 copy0 magic is bad
134129.083: [00.875]Item0 (Map) magic is bad
134129.083: [00.878]the secure storage item0 copy1 magic is bad
134129.084: [00.882]Item0 (Map) magic is bad
134129.084: [00.885]out of usb burn from boot: not need burn key
134129.084: root_partition is rootfs
134129.085: set root to /dev/mmcblk0p4
134129.085: [00.895]update part info
134129.090: [00.897]bootmode[2]:0x5a
134129.090: [00.900][mmc]: mmc exit start
134129.695: [00.918][mmc]: mmc 2 exit ok3]HELLO! BOOT0 is starting!
134129.696: [56]BOOT0 commit : 8433e8ed75
134129.696: [59]set pll start
134129.696: [60]periph0 has been enabled
134129.697: [63]set pll end
134129.712: [66]PMU: AXP21
134129.712: [68]board init ok
134129.713: [70]rtc[0] value = 0x80000001
134129.713: [73]rtc[2] value = 0x5aa5a55a
134129.713: [76]eraly jump fel
134131.773: CCC[2122]fes begin commit:2a3ec52022
134131.773: [2125]set pll start
134131.773: [2127]periph0 has been enabled
134131.773: [2130]set pll end
134131.774: [2132][pmu]: bus read error
134131.774: [2134]board init ok
134131.774: [2136]beign to init dram
134131.774: [2139]DRAM use internal ZQ!!
134131.775: [2141]ZQ value = 0x2e
134131.785: [2143]chip id check OK
134131.785: [2146]trefi:7.8ms
134131.785: [2148][AUTO DEBUG] two rank and full DQ!
134131.785: [2152]trefi:7.8ms