[30]HELLO! BOOT0 is starting!
[33]BOOT0 commit : 09b36272
[36]set pll start
[41]periph0 has been enabled
[44]set pll end
[46][pmu]: bus read error
[48]board init ok
[50]enable_jtag
[52]DRAM only have internal ZQ!!
[55]get_pmu_exist() = -1
[57]DRAM BOOT DRIVE INFO: V0.32
[60]DRAM CLK = 792 MHz
[62]DRAM Type = 3 (2:DDR2,3:DDR3)
[66]DRAMC ZQ value: 0x7b7bfb
[68]DRAM ODT value: 0x42.
[71]ddr_efuse_type: 0x0
[73]mark_id: 0x34
[76]DRAM SIZE =256 M
[78]PLL_DDR_CTRL_REG:0xf8004100
[81]DRAM_CLK_REG:0xc0000000
[84][TIMING DEBUG] MR2= 0x18
[91]DRAM simple test OK.
[94]rtc standby flag is 0x0, super standby flag is 0x0
[99]dram size =256
[101]card no is 2
[103]sdcard 2 line count 4
[106][mmc]: mmc driver ver 2021-05-21 14:47
[115][mmc]: Wrong media type 0x0, but host sdc2, try mmc first
[120][mmc]: ***Try MMC card 2***
[145][mmc]: RMCA OK!
[147][mmc]: mmc 2 bias 0
[152][mmc]: MMC 5.1
[153][mmc]: HSSDR52/SDR25 4 bit
[156][mmc]: 50000000 Hz
[159][mmc]: 3648 MB
[161][mmc]: ***SD/MMC 2 init OK!!!***
[256]Loading boot-pkg Succeed(index=0).
[259]Entry_name        = u-boot
[267]Entry_name        = optee
[271]Entry_name        = dtb
[274]tunning data addr:0x430003e8
[277]Jump to second Boot.
M/TC: OP-TEE version: 15ee1539 (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Tue Mar 29 06:48:41 UTC 2022 arm


U-Boot 2018.05-g9ae43f5 (Sep 05 2023 - 09:12:39 +0000) Allwinner Technology

1、应该是安全启动。期望创龙官方给一个optee方面的文档，从网上看全志T113 cpu里的optee方面没有文档，遇见问题无从下手。
2、@awwwwa 谢谢您的回复，如果刷写过安全启动，您提供的方案能解决我的问题吗？

在 device/config/chips/t113_i/configs/default/ 修改 boot_package.cfg 删除 optee.fex 行

在 lichee/linux-5.4/arch/arm/boot/dts/sun8iw20p1.dtsi 中注释

psci {
	compatible = "arm,psci-1.0";
	method = "smc";
};

前往 lichee/linux-5.4/arch/arm/mach-sunxi/platsmp.c 加入

static int sun8i_t113_smp_boot_secondary(unsigned int cpu,
				    struct task_struct *idle)
{
    u32 reg;
    void __iomem *cpucfg_membase = ioremap(0x09010000, 0x10);
    void __iomem *cpuexec_membase[] = {ioremap(0x070005C4, 0x10),ioremap(0x070005C8, 0x10)};
	
	if (cpu != 1)
	    return 0;

	spin_lock(&cpu_lock);

	writel(__pa_symbol(secondary_startup),	cpuexec_membase[cpu]);

	reg = readl(cpucfg_membase);
	writel(reg | BIT(cpu), cpucfg_membase);

	spin_unlock(&cpu_lock);

	return 0;
}

static const struct smp_operations sun8i_t113_smp_ops __initconst = {
	.smp_boot_secondary	= sun8i_t113_smp_boot_secondary,
};
CPU_METHOD_OF_DECLARE(sun8i_t113_smp, "allwinner,sun8iw20p1", &sun8i_t113_smp_ops);

注意这只是临时修改跳过检查，之后最好使用创龙提供的虚拟机复现看看会不会也出现这个问题