<![CDATA[D1开发板初次编译uboot]]>初次编译uboot的时候，不是要配置uboot嘛，然后我将tina目录下的u-boot-2018拷贝到另外一个目录，参考了正点原子的教程编译uboot，参考截图如下：deebaa97-50c0-427b-9ef8-b1410eb3a66e-image.png ，先进行清除工程，使用了如下命令：make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu-distclean ,使用情况如下：1e673c05-2d43-434c-a47d-96b597cbf2f9-image.png ，也使用了mboot进行编译，使用情况如下：b23de1e4-d943-475a-a881-fa917f456613-image.png 所以，初次进行编译uboot，其命令是什么呢（包括清除、配置、编译三个命令）？

]]>https://bbs.aw-ol.com/topic/96/d1开发板初次编译ubootRSS for NodeSun, 16 Aug 2026 19:51:38 GMTThu, 27 May 2021 13:01:38 GMT60<![CDATA[Reply to D1开发板初次编译uboot on Sun, 06 Feb 2022 06:31:43 GMT]]>@hyansuper
执行前面的命令之后，
再执行 muboot 就是单独编译 uboot了。

]]>https://bbs.aw-ol.com/post/4279https://bbs.aw-ol.com/post/4279Sun, 06 Feb 2022 06:31:43 GMT<![CDATA[Reply to D1开发板初次编译uboot on Sun, 06 Feb 2022 06:03:00 GMT]]>你好@March 你的问题解决了吗？单独编译uboot，我是菜鸟，想学学uboot，不想直接编译整个镜像

]]>https://bbs.aw-ol.com/post/4278https://bbs.aw-ol.com/post/4278Sun, 06 Feb 2022 06:03:00 GMT<![CDATA[Reply to D1开发板初次编译uboot on Sat, 29 May 2021 14:52:12 GMT]]>@march 还是用这个完整的.img文件，工具上选"单或多分区烧录"，可以勾选需要烧录的逻辑分区。若什么都不勾选，则只烧录img中的boot0和uboot等。

]]>https://bbs.aw-ol.com/post/365https://bbs.aw-ol.com/post/365Sat, 29 May 2021 14:52:12 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 07:37:31 GMT]]>@march其实错误 提示很明显了，就少了一个空格，你仔细看下。

]]>https://bbs.aw-ol.com/post/341https://bbs.aw-ol.com/post/341Fri, 28 May 2021 07:37:31 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 07:34:52 GMT]]>@xiaowenge 选择不了.bin文件啊18756e17-285d-433a-8f10-885bdfa34e8f-image.png

]]>https://bbs.aw-ol.com/post/340https://bbs.aw-ol.com/post/340Fri, 28 May 2021 07:34:52 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 07:10:32 GMT]]>@march 试下烧的时候选分区烧写（另外你这是想干嘛

]]>https://bbs.aw-ol.com/post/338https://bbs.aw-ol.com/post/338Fri, 28 May 2021 07:10:32 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 06:21:39 GMT]]>@kirin 求救🙏

]]>https://bbs.aw-ol.com/post/337https://bbs.aw-ol.com/post/337Fri, 28 May 2021 06:21:39 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 04:26:07 GMT]]>@kirin 那如何将单独烧写uboot呢 用PhoenixSuit烧写不能选中.bin文件啊

]]>https://bbs.aw-ol.com/post/328https://bbs.aw-ol.com/post/328Fri, 28 May 2021 04:26:07 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 03:02:06 GMT]]>xxxx@AwExdroidxx:~/workspace/d_tina_d1_open_v1.0$ source build/envsetup.sh Setup env done! Please run lunch next. xxxx@AwExdroidxx:~/workspace/d_tina_d1_open_v1.0$ lunch You're building on Linux Lunch menu... pick a combo: 1. d1_nezha_min-tina 2. d1_nezha-tina Which would you like? [Default d1_nezha]: 2 ============================================ TINA_BUILD_TOP=/home/xxxx/workspace/d_tina_d1_open_v1.0 TINA_TARGET_ARCH=riscv TARGET_PRODUCT=d1_nezha TARGET_PLATFORM=d1 TARGET_BOARD=d1-nezha TARGET_PLAN=nezha TARGET_BUILD_VARIANT=tina TARGET_BUILD_TYPE=release TARGET_KERNEL_VERSION=5.4 TARGET_UBOOT=u-boot-2018 TARGET_CHIP=sun20iw1p1 ============================================ xxxx@AwExdroidxx:~/workspace/d_tina_d1_open_v1.0$ mboot mboot mboot0 xxxx@AwExdroidxx:~/workspace/d_tina_d1_open_v1.0$ mboot d1_nezha d1 d1-nezha build_boot platform:sun20iw1p1 o_option:uboot Prepare toolchain ... build for sun20iw1p1_defconfig ... CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h CHK include/config.h CFG u-boot.cfg CHK include/generated/version_autogenerated.h CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h

编出来的uboot在d_tina_d1_open_v1.0/device/config/chips/d1/bin下

]]>https://bbs.aw-ol.com/post/324https://bbs.aw-ol.com/post/324Fri, 28 May 2021 03:02:06 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 02:23:37 GMT]]>@kirin 🤥 🤥 🤥

]]>https://bbs.aw-ol.com/post/323https://bbs.aw-ol.com/post/323Fri, 28 May 2021 02:23:37 GMT<![CDATA[Reply to D1开发板初次编译uboot on Fri, 28 May 2021 01:23:43 GMT]]>@kirin 我只想单独编译uboot 而且初次编译uboot不是需要配置的嘛 这里我将uboot从tina的文件夹拷贝到另外一个单独的文件夹了 只对这个uboot进行编译

]]>https://bbs.aw-ol.com/post/322https://bbs.aw-ol.com/post/322Fri, 28 May 2021 01:23:43 GMT<![CDATA[Reply to D1开发板初次编译uboot on Thu, 27 May 2021 15:31:19 GMT]]>@march
配置好环境变量后，ckernel，然后mboot

]]>https://bbs.aw-ol.com/post/321https://bbs.aw-ol.com/post/321Thu, 27 May 2021 15:31:19 GMT