[100]HELLO! BOOT0 is starting!
[103]BOOT0 commit :
[105]set pll start
[107]periph0 has been enabled
[110]set pll end
[111]board init ok
[113]DRAM only have internal ZQ!!
[116]get_pmu_exist() = -1
[119]ddr_efuse_type: 0x0
[122][AUTO DEBUG] single rank and full DQ!
[126]ddr_efuse_type: 0x0
[129][AUTO DEBUG] rank 0 row = 16
[132][AUTO DEBUG] rank 0 bank = 8
[135][AUTO DEBUG] rank 0 page size = 2 KB
[139]DRAM BOOT DRIVE INFO: V0.24
[142]DRAM CLK = 792 MHz
[144]DRAM Type = 3 (2:DDR2,3:DDR3)
[147]DRAMC ZQ value: 0x7b7bfb
[150]DRAM ODT value: 0x42.
[152]ddr_efuse_type: 0x0
[155]DRAM SIZE =1024 M
[159]DRAM simple test OK.
[161]dram size =1024
[163]card no is 0
[165]sdcard 0 line count 4
[167][mmc]: mmc driver ver 2021-04-2 16:45
[177][mmc]: Wrong media type 0x0
[180][mmc]: \*\*\*Try SD card 0***
[189][mmc]: HSSDR52/SDR25 4 bit
[192][mmc]: 50000000 Hz
[194][mmc]: 29818 MB
[196][mmc]: \*\*\*SD/MMC 0 init OK!!!***
[237]Loading boot-pkg Succeed(index=0).
[240]Entry_name = opensbi
[243]Entry_name = dtb
[246]Entry_name = u-boot
[249]Adding DRAM info to DTB.
[253]Jump to second Boot.
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Allwinner D1 NeZha
Platform Features : medeleg
Platform HART Count : 1
Platform IPI Device : aclint-mswi
Platform Timer Device : aclint-mtimer @ 24000000Hz
Platform Console Device : uart8250
Platform HSM Device : ---
Platform Reboot Device : sunxi-wdt-reset
Platform Shutdown Device : ---
Firmware Base : 0x40000000
Firmware Size : 248 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000014008000-0x000000001400bfff (I)
Domain0 Region01 : 0x0000000014000000-0x0000000014007fff (I)
Domain0 Region02 : 0x0000000040000000-0x000000004003ffff ()
Domain0 Region03 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x000000004a000000
Domain0 Next Arg1 : 0x0000000044000000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,mcountinhibit,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 2048
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 0
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10 (Feb 02 2023 - 04:26:07 +0800)
DRAM: 1 GiB
WDT: Started watchdog@6011000 with servicing (16s timeout)
MMC: mmc@4020000: 0, mmc@4021000: 1
Loading Environment from nowhere... OK
In: serial@2500000
Out: serial@2500000
Err: serial@2500000
Net: Could not get PHY for ethernet@4500000: addr 1
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
134 bytes read in 3 ms (43 KiB/s)
1: linux
Retrieving file: /boot/Image
15509024 bytes read in 1344 ms (11 MiB/s)
append: console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait
Retrieving file: /boot/sun20i-d1-nezha.dtb
24602 bytes read in 8 ms (2.9 MiB/s)
\## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff6000, end 0000000049fff019 ... OK
Starting kernel ...
[ 0.000000] Linux version 5.14.0-rc4 (root@DESKTOP-0JDOC5O) (riscv64-unknown-linux-gnu-gcc (Xuantie-900 linux-5.10.4 glibc gcc Toolchain V2.6.1 B-20220906) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 PREEMPT Thu Feb 2 04:26:27 CST 2023
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Machine model: Allwinner D1 NeZha
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040200000-0x000000005fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040200000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x000000005fffffff]
[ 0.000000] SBI specification v0.3 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x9
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] riscv: ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128775
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 497720K/522240K available (5678K kernel code, 4861K rwdata, 2048K rodata, 2092K init, 266K bss, 24520K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] OF: of_irq_init: found /cpus/cpu@0/interrupt-controller with parent (null)
[ 0.000000] OF: of_irq_init: found /soc/interrupt-controller@6010000 with parent /soc/interrupt-controller@10000000
[ 0.000000] OF: of_irq_init: found /soc/interrupt-controller@10000000 with parent /cpus/cpu@0/interrupt-controller
[ 0.000000] OF: of_irq_init: init /cpus/cpu@0/interrupt-controller with parent (null)
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] OF: of_irq_init: init /soc/interrupt-controller@10000000 with parent /cpus/cpu@0/interrupt-controller
[ 0.000000] plic: interrupt-controller@10000000: mapped 176 interrupts with 1 handlers for 2 contexts.
[ 0.000000] OF: of_irq_init: init /soc/interrupt-controller@6010000 with parent /soc/interrupt-controller@10000000
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000411] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000848] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000886] pid_max: default: 32768 minimum: 301
[ 0.001084] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.001115] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.002990] ASID allocator using 16 bits (65536 entries)
[ 0.003169] rcu: Hierarchical SRCU implementation.
[ 0.003725] devtmpfs: initialized
[ 0.009764] random: get_random_bytes called from net_ns_init+0x9c/0x35c with crng_init=0
[ 0.010216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.010264] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.010377] pinctrl core: initialized pinctrl subsystem
[ 0.011503] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.011869] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.011979] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.012563] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.012578] thermal_sys: Registered thermal governor 'step_wise'
[ 0.012594] thermal_sys: Registered thermal governor 'user_space'
[ 0.057570] vcc-3v3: supplied by vcc
[ 0.057890] iommu: Default domain type: Translated
[ 0.058199] usbcore: registered new interface driver usbfs
[ 0.058287] usbcore: registered new interface driver hub
[ 0.058373] usbcore: registered new device driver usb
[ 0.059058] Advanced Linux Sound Architecture Driver Initialized.
[ 0.060016] clocksource: Switched to clocksource riscv_clocksource
[ 0.062550] NET: Registered PF_INET protocol family
[ 0.062752] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.064253] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.064325] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.064398] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.064453] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.064587] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.064639] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.064896] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.066000] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[ 0.073816] NET: Registered PF_ALG protocol family
[ 0.096906] ldoa: supplied by vcc-3v3
[ 0.097624] ldob: supplied by vcc-3v3
[ 0.102001] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.107546] libphy: Fixed MDIO Bus: probed
[ 0.108755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.108779] ehci-platform: EHCI generic platform driver
[ 0.109066] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.109112] ohci-platform: OHCI generic platform driver
[ 0.109522] usbcore: registered new interface driver ch341
[ 0.109586] usbserial: USB Serial support registered for ch341-uart
[ 0.110137] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 0.110484] i2c /dev entries driver
[ 0.112150] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 0.113795] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.114159] sun8i-ce 3040000.crypto: Set mod clock to 300000000 (300 Mhz) from 400000000 (400 Mhz)
[ 0.114486] sun8i-ce 3040000.crypto: will run requests pump with realtime priority
[ 0.114706] sun8i-ce 3040000.crypto: will run requests pump with realtime priority
[ 0.114913] sun8i-ce 3040000.crypto: will run requests pump with realtime priority
[ 0.115127] sun8i-ce 3040000.crypto: will run requests pump with realtime priority
[ 0.115271] sun8i-ce 3040000.crypto: Register cbc(aes)
[ 0.115465] sun8i-ce 3040000.crypto: Register ecb(aes)
[ 0.115689] sun8i-ce 3040000.crypto: Register cbc(des3_ede)
[ 0.115888] sun8i-ce 3040000.crypto: Register ecb(des3_ede)
[ 0.116162] sun8i-ce 3040000.crypto: Register md5
[ 0.116365] sun8i-ce 3040000.crypto: Register sha1
[ 0.116566] sun8i-ce 3040000.crypto: Register sha224
[ 0.116765] sun8i-ce 3040000.crypto: Register sha256
[ 0.116962] sun8i-ce 3040000.crypto: Register sha384
[ 0.117160] sun8i-ce 3040000.crypto: Register sha512
[ 0.117358] sun8i-ce 3040000.crypto: Register stdrng
[ 0.118015] sun8i-ce 3040000.crypto: CryptoEngine Die ID 0
[ 0.120618] usbcore: registered new interface driver snd-usb-audio
[ 0.122739] aldo: supplied by vcc-3v3
[ 0.123220] hpldo: supplied by vcc-3v3
[ 0.123655] sun20i-codec 2030000.audio-codec: ASoC: Adding component 2030000.audio-codec for platform /soc/audio-codec@2030000
[ 0.123699] sun20i-codec 2030000.audio-codec: ASoC: Adding component 2030000.audio-codec for platform /soc/audio-codec@2030000
[ 0.124952] random: fast init done
[ 0.125882] random: crng init done
[ 0.133541] NET: Registered PF_INET6 protocol family
[ 0.134985] Segment Routing with IPv6
[ 0.135104] NET: Registered PF_PACKET protocol family
[ 0.172751] sun20i-d1-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[ 0.174523] vdd-cpu: supplied by vcc
[ 0.175591] printk: console [ttyS0] disabled
[ 0.195924] 2500000.serial: ttyS0 at MMIO 0x2500000 (irq = 24, base_baud = 1500000) is a 16550A
[ 0.964056] printk: console [ttyS0] enabled
[ 0.990015] 2500400.serial: ttyS1 at MMIO 0x2500400 (irq = 25, base_baud = 1500000) is a 16550A
[ 1.401094] spi-nand: probe of spi0.0 failed with error -110
[ 1.408843] dwmac-sun8i 4500000.ethernet: IRQ eth_wake_irq not found
[ 1.415282] dwmac-sun8i 4500000.ethernet: IRQ eth_lpi not found
[ 1.421671] dwmac-sun8i 4500000.ethernet: PTP uses main clock
[ 1.427520] dwmac-sun8i 4500000.ethernet: Current syscon value is not the default 50006 (expect 0)
[ 1.436801] dwmac-sun8i 4500000.ethernet: No HW DMA feature register supported
[ 1.444106] dwmac-sun8i 4500000.ethernet: RX Checksum Offload Engine supported
[ 1.451364] dwmac-sun8i 4500000.ethernet: COE Type 2
[ 1.456362] dwmac-sun8i 4500000.ethernet: TX Checksum insertion supported
[ 1.463177] dwmac-sun8i 4500000.ethernet: Normal descriptors
[ 1.468866] dwmac-sun8i 4500000.ethernet: Chain mode enabled
[ 1.474564] dwmac-sun8i 4500000.ethernet: device MAC address ee:03:fc:8b:ad:70
[ 1.482493] libphy: stmmac: probed
[ 1.587993] dwmac-sun8i 4500000.ethernet: EMAC reset timeout
[ 1.593701] dwmac-sun8i 4500000.ethernet eth0: stmmac_dvr_remove: removing driver
[ 1.613096] ------------[ cut here ]------------
[ 1.617728] bus-emac already disabled
[ 1.621418] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec
[ 1.629443] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4 #1
[ 1.636059] Hardware name: Allwinner D1 NeZha (DT)
[ 1.640850] Workqueue: events_unbound deferred_probe_work_func
[ 1.646694] epc : clk_core_disable+0xcc/0xec
[ 1.650970] ra : clk_core_disable+0xcc/0xec
[ 1.655246] epc : ffffffff80238254 ra : ffffffff80238254 sp : ffffffd00411bb00
[ 1.662465] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f
[ 1.669683] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00
[ 1.676900] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8
[ 1.684118] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002
[ 1.691335] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29
[ 1.698552] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe001375010
[ 1.705769] s5 : ffffffe01fdf7a80 s6 : ffffffff8001f80c s7 : ffffffffffffffff
[ 1.712988] s8 : 0000000000000001 s9 : ffffffe001b80000 s10: ffffffe001b80760
[ 1.720205] s11: 0000000000000000 t3 : 0000000000000062 t4 : ffffffffffffffff
[ 1.727422] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8e0
[ 1.732732] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003
[ 1.740644] [<ffffffff80238254>] clk_core_disable+0xcc/0xec
[ 1.746222] [<ffffffff8023c3a8>] clk_disable+0x38/0x78
[ 1.751371] [<ffffffff8001f808>] worker_thread+0x1a0/0x4b8
[ 1.756868] [<ffffffff80315188>] stmmac_remove_config_dt+0x1c/0x4c
[ 1.763067] [<ffffffff80317588>] sun8i_dwmac_probe+0x378/0x830
[ 1.768905] [<ffffffff803bf0d4>] of_find_property+0x7c/0xe8
[ 1.774486] [<ffffffff8001f808>] worker_thread+0x1a0/0x4b8
[ 1.779979] [<ffffffff80296134>] platform_probe+0x64/0xf0
[ 1.785388] [<ffffffff80293db4>] really_probe.part.0+0x8c/0x30c
[ 1.791312] [<ffffffff802940d4>] __driver_probe_device+0xa0/0x148
[ 1.797411] [<ffffffff802941b4>] driver_probe_device+0x38/0x138
[ 1.803335] [<ffffffff80294444>] __device_attach_driver+0xd0/0x170
[ 1.809520] [<ffffffff80294370>] __driver_attach_async_helper+0xbc/0xc0
[ 1.816137] [<ffffffff80291fec>] bus_for_each_drv+0x68/0xb4
[ 1.821715] [<ffffffff80294794>] __device_attach+0xd8/0x184
[ 1.827292] [<ffffffff802921f0>] bus_probe_device+0x98/0xbc
[ 1.832868] [<ffffffff80293378>] deferred_probe_work_func+0x90/0xd4
[ 1.839139] [<ffffffff8001f4c4>] process_one_work+0x1dc/0x380
[ 1.844891] [<ffffffff8001f978>] worker_thread+0x310/0x4b8
[ 1.850382] [<ffffffff80026708>] kthreadd+0x94/0x180
[ 1.855357] [<ffffffff80026708>] kthreadd+0x94/0x180
[ 1.860327] [<ffffffff8001f664>] process_one_work+0x37c/0x380
[ 1.866079] [<ffffffff80026078>] kthread+0x120/0x15c
[ 1.871049] [<ffffffff80025f54>] set_kthread_struct+0x5c/0x60
[ 1.876798] [<ffffffff80001f0c>] ret_from_syscall_rejected+0x8/0xc
[ 1.882987] ---[ end trace 7d34cf5a8175b745 ]---
[ 1.887708] ------------[ cut here ]------------
[ 1.892403] bus-emac already unprepared
[ 1.896408] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168
[ 1.904706] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1
[ 1.912710] Hardware name: Allwinner D1 NeZha (DT)
[ 1.917502] Workqueue: events_unbound deferred_probe_work_func
[ 1.923345] epc : clk_core_unprepare+0xe4/0x168
[ 1.927881] ra : clk_core_unprepare+0xe4/0x168
[ 1.932417] epc : ffffffff80239650 ra : ffffffff80239650 sp : ffffffd00411bb00
[ 1.939636] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002
[ 1.946855] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00
[ 1.954073] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800
[ 1.961291] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001
[ 1.968509] a5 : 0000000000000000 a6 : 0000000005e5d127 a7 : 0000000000000001
[ 1.975727] s2 : 0000000000000800 s3 : ffffffff80afebd0 s4 : ffffffe001375010
[ 1.982945] s5 : ffffffe01fdf7a80 s6 : ffffffff8001f80c s7 : ffffffffffffffff
[ 1.990163] s8 : 0000000000000001 s9 : ffffffe001b80000 s10: ffffffe001b80760
[ 1.997382] s11: 0000000000000000 t3 : ffffffff80b39160 t4 : 0000000000000001
[ 2.004592] t5 : 0000000000000000 t6 : ffffffe001600002
[ 2.009902] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003
[ 2.017814] [<ffffffff80239650>] clk_core_unprepare+0xe4/0x168
[ 2.023654] [<ffffffff8023c318>] clk_unprepare+0x24/0x3c
[ 2.028976] [<ffffffff80315190>] stmmac_remove_config_dt+0x24/0x4c
[ 2.035174] [<ffffffff80317588>] sun8i_dwmac_probe+0x378/0x830
[ 2.041013] [<ffffffff803bf0d4>] of_find_property+0x7c/0xe8
[ 2.046594] [<ffffffff8001f808>] worker_thread+0x1a0/0x4b8
[ 2.052093] [<ffffffff80296134>] platform_probe+0x64/0xf0
[ 2.057503] [<ffffffff80293db4>] really_probe.part.0+0x8c/0x30c
[ 2.063428] [<ffffffff802940d4>] __driver_probe_device+0xa0/0x148
[ 2.069526] [<ffffffff802941b4>] driver_probe_device+0x38/0x138
[ 2.075451] [<ffffffff80294444>] __device_attach_driver+0xd0/0x170
[ 2.081636] [<ffffffff80294370>] __driver_attach_async_helper+0xbc/0xc0
[ 2.088254] [<ffffffff80291fec>] bus_for_each_drv+0x68/0xb4
[ 2.093831] [<ffffffff80294794>] __device_attach+0xd8/0x184
[ 2.099410] [<ffffffff802921f0>] bus_probe_device+0x98/0xbc
[ 2.104988] [<ffffffff80293378>] deferred_probe_work_func+0x90/0xd4
[ 2.111258] [<ffffffff8001f4c4>] process_one_work+0x1dc/0x380
[ 2.117010] [<ffffffff8001f978>] worker_thread+0x310/0x4b8
[ 2.122503] [<ffffffff80026708>] kthreadd+0x94/0x180
[ 2.127477] [<ffffffff80026708>] kthreadd+0x94/0x180
[ 2.132449] [<ffffffff8001f664>] process_one_work+0x37c/0x380
[ 2.138200] [<ffffffff80026078>] kthread+0x120/0x15c
[ 2.143170] [<ffffffff80025f54>] set_kthread_struct+0x5c/0x60
[ 2.148920] [<ffffffff80001f0c>] ret_from_syscall_rejected+0x8/0xc
[ 2.155109] ---[ end trace 7d34cf5a8175b746 ]---
[ 2.159822] dwmac-sun8i: probe of 4500000.ethernet failed with error -14
[ 2.168790] input: 2009800.keys as /devices/platform/soc/2009800.keys/input/input0
[ 2.181581] i2c i2c-1: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x4, status: 0x0, addr: 0x38, flags: 0x1
[ 2.190909] pcf857x: probe of 1-0038 failed with error -11
[ 2.198561] sun20i-ledc 2008000.led-controller: supply vled not found, using dummy regulator
[ 2.207642] sun20i-ledc 2008000.led-controller: Registered 1 LEDs
[ 2.218234] usbvbus: supplied by vcc
[ 2.222100] sunxi-mmc 4020000.mmc: Got CD GPIO
[ 2.227972] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
[ 2.235668] acked 85 in 0x00000274, was 0x00200000, now 0x00000000
[ 2.241906] acked 84 in 0x00000274, was 0x00100000, now 0x00000000
[ 2.248853] phy phy-4100400.phy.0: Changing dr_mode to 1
[ 2.254233] phy phy-4100400.phy.0: External vbus detected, not enabling our own vbus
[ 2.262108] sunxi-mmc 4021000.mmc: initialized, max. request size: 2047 KB, uses new timings mode
[ 2.271169] ehci-platform 4101000.usb: EHCI Host Controller
[ 2.276929] sunxi-mmc 4020000.mmc: initialized, max. request size: 2047 KB, uses new timings mode
[ 2.285858] acked 134 in 0x000002b4, was 0x00000040, now 0x00000000
[ 2.292341] ehci-platform 4101000.usb: new USB bus registered, assigned bus number 1
[ 2.300688] ehci-platform 4101000.usb: irq 42, io mem 0x04101000
[ 2.320058] ehci-platform 4101000.usb: USB 2.0 started, EHCI 1.00
[ 2.326473] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.334840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.342256] usb usb1: Product: EHCI Host Controller
[ 2.347225] usb usb1: Manufacturer: Linux 5.14.0-rc4 ehci_hcd
[ 2.353042] usb usb1: SerialNumber: 4101000.usb
[ 2.358493] hub 1-0:1.0: USB hub found
[ 2.362391] hub 1-0:1.0: 1 port detected
[ 2.367597] ehci-platform 4200000.usb: EHCI Host Controller
[ 2.373312] ehci-platform 4200000.usb: new USB bus registered, assigned bus number 2
[ 2.381350] ehci-platform 4200000.usb: irq 44, io mem 0x04200000
[ 2.400068] ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00
[ 2.406487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.414836] mmc0: Problem switching card into high-speed mode!
[ 2.420726] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.428269] mmc0: new SDHC card at address 0001
[ 2.432863] usb usb2: Product: EHCI Host Controller
[ 2.438828] mmcblk0: mmc0:0001 SD16G 29.1 GiB
[ 2.443366] usb usb2: Manufacturer: Linux 5.14.0-rc4 ehci_hcd
[ 2.449808] usb usb2: SerialNumber: 4200000.usb
[ 2.454514] mmcblk0: p1
[ 2.458964] hub 2-0:1.0: USB hub found
[ 2.462864] hub 2-0:1.0: 1 port detected
[ 2.508165] ohci-platform 4101400.usb: Generic Platform OHCI controller
[ 2.514891] ohci-platform 4101400.usb: new USB bus registered, assigned bus number 3
[ 2.522898] ohci-platform 4101400.usb: irq 43, io mem 0x04101400
[ 2.592330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
[ 2.600648] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.607903] usb usb3: Product: Generic Platform OHCI controller
[ 2.613856] usb usb3: Manufacturer: Linux 5.14.0-rc4 ohci_hcd
[ 2.619633] usb usb3: SerialNumber: 4101400.usb
[ 2.624969] hub 3-0:1.0: USB hub found
[ 2.628868] hub 3-0:1.0: 1 port detected
[ 2.634038] ohci-platform 4200400.usb: Generic Platform OHCI controller
[ 2.640929] ohci-platform 4200400.usb: new USB bus registered, assigned bus number 4
[ 2.648920] ohci-platform 4200400.usb: irq 45, io mem 0x04200400
[ 2.716284] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.14
[ 2.724635] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.731901] usb usb4: Product: Generic Platform OHCI controller
[ 2.737854] usb usb4: Manufacturer: Linux 5.14.0-rc4 ohci_hcd
[ 2.743634] usb usb4: SerialNumber: 4200400.usb
[ 2.748977] hub 4-0:1.0: USB hub found
[ 2.752875] hub 4-0:1.0: 1 port detected
[ 2.759067] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.765093] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[ 2.773187] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14
[ 2.781506] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.788763] usb usb5: Product: MUSB HDRC host driver
[ 2.793764] usb usb5: Manufacturer: Linux 5.14.0-rc4 musb-hcd
[ 2.799546] usb usb5: SerialNumber: musb-hdrc.1.auto
[ 2.805348] hub 5-0:1.0: USB hub found
[ 2.809245] hub 5-0:1.0: 1 port detected
[ 2.814171] using random self ethernet address
[ 2.818691] using random host ethernet address
[ 2.823975] usb0: HOST MAC 9a:c4:22:db:37:d3
[ 2.828590] usb0: MAC 7e:30:b1:09:6a:7b
[ 2.832512] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.839166] g_ether gadget: g_ether ready
[ 2.844245] sun8i-dsp-rproc 1700000.dsp: error -ENOENT: Failed to get cfg reset
[ 2.851614] sun8i-dsp-rproc: probe of 1700000.dsp failed with error -2
[ 2.858199] remoteproc remoteproc0: releasing 1700000.dsp
[ 2.864927] ALSA device list:
[ 2.867913] #0: sun20i-codec
[ 2.885403] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[ 2.895631] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
[ 2.903389] devtmpfs: mounted
[ 2.907779] Freeing unused kernel image (initmem) memory: 2092K
[ 2.913793] Run /sbin/init as init process
[ 3.333614] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null). Quota mode: disabled.
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Saving random seed: OK
Starting network: OK
Welcome to Buildroot
buildroot login: root
[ 33.764074] ldob: disabling
[ 33.766906] usbvbus: disabling
\# free -h
total used free shared buff/cache available
Mem: 488.1M 9.0M 474.3M 56.0K 4.8M 472.6M
Swap: 0 0 0
\# cat /proc/meminfo
MemTotal: 499812 kB
MemFree: 485596 kB
MemAvailable: 483800 kB
Buffers: 272 kB
Cached: 2288 kB
SwapCached: 0 kB
Active: 2396 kB
Inactive: 656 kB
Active(anon): 60 kB
Inactive(anon): 488 kB
Active(file): 2336 kB
Inactive(file): 168 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 44 kB
Writeback: 0 kB
AnonPages: 544 kB
Mapped: 1740 kB
Shmem: 56 kB
KReclaimable: 2360 kB
Slab: 7052 kB
SReclaimable: 2360 kB
SUnreclaim: 4692 kB
KernelStack: 768 kB
PageTables: 144 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 249904 kB
Committed_AS: 1804 kB
VmallocTotal: 67108863 kB
VmallocUsed: 804 kB
VmallocChunk: 0 kB
Percpu: 32 kB
#
L
linstcl 发布的最新帖子
-
回复: 为什么D1的buildroot编译出来内存只有400多M发布在 MR Series
-
为什么D1的buildroot编译出来内存只有400多M发布在 MR Series
我有一个1G的licheeRV开发板，运行tina编译出来的系统，内存正常识别到是1G，但是运行buildroot编译的系统时，就只能识别400过点的内存，请问一下这是为什么？