全志sdio,打开sdio 3.0就注册不了wifi,这是为啥呢?有大佬知道吗?
打开sdio 3.0模式就报这个错误:sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range
G
gwx123 发布的最佳帖子
-
h618怎么才能支持sdio 3.0模式
gwx123 发布的最新帖子
-
回复: wifi跑不起来
@awwwwa 日志如下
-------- beginning of main 01-01 08:00:05.964 174 174 W lowmemorykiller: LMKD : whitelist android.signature.cts.api.hiddenapi_blacklist_api_27;android.signature.cts.api.hiddenapi_blacklist_api_28;android.signature.cts.api.hiddenapi_blacklist_current;android.media.cts;android.process.media;com.antutu.ABenchMark;com.antutu.benchmark.full;com.antutu.benchmark.full:unity;com.antutu.ABenchMark:push;com.futuremark.dmandroid.application;com.allwinner.batterytest;cn.xender;com.socialnmobile.dictapps.notepad.color.note;org.videolan.vlc; 01-01 08:00:05.964 174 174 I lowmemorykiller: Using psi monitors for memory pressure detection 01-01 08:00:05.966 174 174 I lowmemorykiller: Process polling is supported --------- beginning of kernel 01-01 08:00:02.196 0 0 I : Booting Linux on physical CPU 0x0000000000 [0x410fd034] 01-01 08:00:02.196 0 0 I : Linux version 5.4.125+ (robin@robin) (Android (7485623, based on r416183b1) clang version 12.0.7 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.7 (/buildbot/src/android/llvm-r416183/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #3 SMP PREEMPT Tue Dec 10 15:33:55 CST 2024 01-01 08:00:02.196 0 0 I Machine model: sun50iw9 01-01 08:00:02.196 0 0 I earlycon: uart8250 at MMIO32 0x0000000005000000 (options '') 01-01 08:00:02.196 0 0 I printk : bootconsole [uart8250] enabled 01-01 08:00:02.196 0 0 I cma : Reserved 8 MiB at 0x00000000bf800000 01-01 08[ 8.365780][ T248] cutils-trace: Error opening trace file: No such file or directory (2) :00:02.196 0 0 D : On node 0 totalpages: 524288 01-01 08:00:02.196 0 0 D DMA32 zone: 8192 pages used for memmap 01-01 08:00:02.196 0 0 D DMA32 zone: 0 pages reserved 01-01 08:00:02.196 0 0 D DMA32 zone: 524288 pages, LIFO batch:63 01-01 08:00:02.196 0 0 I psci : probing for conduit method from DT. 01-01 08:00:02.196 0 0 I psci : PSCIv1.0 detected in firmware. 01-01 08:00:02.196 0 0 I psci : Using standard PSCI v0.2 function IDs 01-01 08:00:02.196 0 0 I psci : Trusted OS migration not required 01-01 08:00:02.196 0 0 I psci : SMC Calling Convention v1.0 01-01 08:00:02.196 0 0 I percpu : Embedded 22 pages/cpu s49944 r8192 d31976 u90112 01-01 08:00:02.196 0 0 D pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096 01-01 08:00:02.196 0 0 D pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 01-01 08:00:02.196 0 0 I : Detected VIPT I-cache on CPU0 01-01 08:00:02.196 0 0 I CPU features: detected: ARM erratum 845719 01-01 08:00:02.196 0 0 I : Built 1 zonelists, mobility grouping on. Total pages: 516096 01-01 08:00:02.196 0 0 I : Kernel command line: earlycon=uart8250,mmio32,0x05000000 clk_ignore_unused initcall_debug=0 console=ttyAS0,115200 loglevel=4 root=/dev/mmcblk0p4 init=/init cma=8M snum=0c001050010248d1f91 mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.force_normal_boot=1 androidboot.slot_suffix=_a androidboot.vbmeta.avb_version=2.0 androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7872 androidboot.vbmeta.digest=5b1037089489ad2fa0c62cd98e9ae2801bc6e393fd0b59a89d303bac5f3f4f8e androidboot.vbmeta.device_state=locked androidboot.veritymode=enforcing androidboot.mode=normal androidboot.serialno=0c001050010248d1f91 androidboot.hardware=sun50iw9p1 boot_type=2 androidboot.boot_type=2 androidboot.secure_os_exist=1 androidboot.trustchain=false androidboot.drmkey=false gpt=1 uboot_message=2018.07-gb99798b(04/04/2023-13:23:26) mbr_offset=1032192 disp_reserve=3686400,0xbbf21000 bootreason=unknow androidboot.dramfreq=720 androidboot.dramsize=2048 loop.max_part=4 android 01-01 08:00:02.196 0 0 I : Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) 01-01 08:00:02.196 0 0 I : Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 01-01 08:00:02.196 0 0 I mem auto-init: stack:off, heap alloc:off, heap free:off 01-01 08:00:02.196 0 0 I Memory : 1990540K/2097152K available (14076K kernel code, 1366K rwdata, 5684K rodata, 1024K init, 778K bss, 98420K reserved, 8192K cma-reserved) 01-01 08:00:02.196 0 0 I SLUB : HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 01-01 08:00:02.196 0 0 I rcu : Preemptible hierarchical RCU implementation. 01-01 08:00:02.196 0 0 I : Tasks RCU enabled. 01-01 08:00:02.196 0 0 I rcu : RCU calculated value of scheduler-enlistment delay is 25 jiffies. 01-01 08:00:02.196 0 0 I NR_IRQS : 64, nr_irqs: 64, preallocated irqs: 0 01-01 08:00:02.196 0 0 I kfence : initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) 01-01 08:00:02.196 0 0 I random : get_random_bytes called from start_kernel+0x224/0x434 with crng_init=0 01-01 08:00:02.196 0 0 I arch_timer: cp15 timer(s) running at 24.00MHz (virt). 01-01 08:00:02.196 0 0 I clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 01-01 08:00:02.196 0 0 I sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 01-01 08:00:02.197 0 0 I clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 01-01 08:00:02.197 0 0 I : Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) 01-01 08:00:02.197 0 0 I pid_max : default: 32768 minimum: 301 01-01 08:00:02.197 0 0 I LSM : Security Framework initializing 01-01 08:00:02.197 0 0 I SELinux : Initializing. 01-01 08:00:02.197 0 0 I : Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.197 0 0 I : Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.198 1 1 I : ASID allocator initialised with 32768 entries 01-01 08:00:02.198 1 1 I rcu : Hierarchical SRCU implementation. 01-01 08:00:02.201 1 1 E BOOTEVENT: 4.206998: ON 01-01 08:00:02.206 1 1 I smp : Bringing up secondary CPUs ... 01-01 08:00:02.206 0 0 I : Detected VIPT I-cache on CPU1 01-01 08:00:02.206 0 0 I CPU1 : Booted secondary processor 0x0000000001 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU2 01-01 08:00:02.207 0 0 I CPU2 : Booted secondary processor 0x0000000002 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU3 01-01 08:00:02.207 0 0 I CPU3 : Booted secondary processor 0x0000000003 [0x410fd034] 01-01 08:00:02.207 1 1 I smp : Brought up 1 node, 4 CPUs 01-01 08:00:02.207 1 1 I SMP : Total of 4 processors activated. 01-01 08:00:02.207 1 1 I CPU features: detected: 32-bit EL0 Support 01-01 08:00:02.207 1 1 I CPU features: detected: CRC32 instructions 01-01 08:00:02.207 1 1 I CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 01-01 08:00:02.207 1 1 I : CPU: All CPU(s) started at EL1 01-01 08:00:02.207 12 12 I alternatives: patching kernel code 01-01 08:00:02.208 1 1 I CPU3 : update max cpu_capacity 1024 01-01 08:00:02.209 1 1 I devtmpfs: initialized 01-01 08:00:02.210 0 0 I [ C1] CPU1: update max cpu_capacity 1024 01-01 08:00:02.217 1 1 I : Registered cp15_barrier emulation handler 01-01 08:00:02.217 1 1 I : Registered setend emulation handler 01-01 08:00:02.217 1 1 I clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 01-01 08:00:02.217 1 1 I : futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 01-01 08:00:02.217 1 1 I pinctrl core: initialized pinctrl subsystem 01-01 08:00:02.218 1 1 I NET : Registered protocol family 16 01-01 08:00:02.220 1 1 I DMA : preallocated 256 KiB pool for atomic allocations 01-01 08:00:02.220 1 1 I audit : initializing netlink subsys (disabled) 01-01 08:00:00.020 173 173 W auditd : type=2000 audit(0.0:1): state=initialized audit_enabled=0 res=1 01-01 08:00:02.220 1 1 I cpuidle : using governor menu 01-01 08:00:02.220 1 1 I hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 01-01 08:00:02.243 1 1 I ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 I r_ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 D : Sunxi ccu sun50iw9-r init OK 01-01 08:00:02.243 1 1 I sun50iw9-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver 01-01 08:00:02.252 1 1 I cryptd : max_cpu_qlen set to 1000 01-01 08:00:02.263 1 1 I iommu : Default domain type: Translated 01-01 08:00:02.263 1 1 I sunxi iommu: irq = 39 01-01 08:00:02.264 1 1 I : SCSI subsystem initialized 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver usbfs 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver hub 01-01 08:00:02.264 1 1 I usbcore : registered new device driver usb 01-01 08:00:02.264 1 1 I videodev: Linux video capture interface: v2.00 01-01 08:00:02.265 1 1 I : Advanced Linux Sound Architecture Driver Initialized. 01-01 08:00:02.265 1 1 I Bluetooth: Core ver 2.22 01-01 08:00:02.265 1 1 I NET : Registered protocol family 31 01-01 08:00:02.265 1 1 I Bluetooth: HCI device and connection manager initialized 01-01 08:00:02.265 1 1 I Bluetooth: HCI socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: L2CAP socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: SCO socket layer initialized 01-01 08:00:02.265 1 1 I : pwm module init! 01-01 08:00:02.266 1 1 W sun50iw9-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator 01-01 08:00:02.266 1 1 W sunxi-i2c5: sunxi-i2c5 supply twi not found, using dummy regulator 01-01 08:00:02.267 1 1 I axp20x-i2c 5-0036: AXP20x variant AXP1530 found 01-01 08:00:02.269 1 1 I axp1530-dcdc1: supplied by regulator-dummy 01-01 08:00:02.269 1 1 I axp1530-dcdc2: supplied by regulator-dummy 01-01 08:00:02.270 1 1 I axp1530-dcdc3: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-aldo1: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-dldo1: supplied by regulator-dummy 01-01 08:00:02.272 1 1 I axp20x-i2c 5-0036: AXP20X driver loaded 01-01 08:00:02.272 1 1 I sunxi-i2c5: probe success 01-01 08:00:02.272 1 1 I clocksource: Switched to clocksource arch_sys_counter 01-01 08:00:02.273 1 1 I VFS : Disk quotas dquot_6.6.0 01-01 08:00:02.273 1 1 I VFS : Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'step_wise' 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'power_allocator' 01-01 08:00:02.274 1 1 I NET : Registered protocol family 2 01-01 08:00:02.275 1 1 I : IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) 01-01 08:00:02.275 1 1 I : tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) 01-01 08:00:02.276 1 1 I TCP : Hash tables configured (established 16384 bind 16384) 01-01 08:00:02.276 1 1 I : UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I : UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I NET : Registered protocol family 1 01-01 08:00:02.276 1 1 I RPC : Registered named UNIX socket transport module. 01-01 08:00:02.276 1 1 I RPC : Registered udp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp NFSv4.1 backchannel transport module. 01-01 08:00:02.277 1 1 I NET : Registered protocol family 44 01-01 08:00:02.277 1 1 I : Trying to unpack rootfs image as initramfs... 01-01 08:00:02.394 1 1 I : Freeing initrd memory: 12456K 01-01 08:00:02.398 1 1 I : Initialise system trusted keyrings 01-01 08:00:02.398 1 1 I workingset: timestamp_bits=62 max_order=19 bucket_order=0 01-01 08:00:02.402 1 1 I : Key type cifs.idmap registered 01-01 08:00:02.402 1 1 I fuse : init (API version 7.31) 01-01 08:00:02.434 1 1 I NET : Registered protocol family 38 01-01 08:00:02.434 1 1 I : Key type asymmetric registered 01-01 08:00:02.434 1 1 I : Asymmetric key parser 'x509' registered 01-01 08:00:02.434 1 1 I : Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) 01-01 08:00:02.434 1 1 I : io scheduler mq-deadline registered 01-01 08:00:02.434 1 1 I : io scheduler kyber registered 01-01 08:00:02.434 1 1 I atomic64_test: passed 01-01 08:00:02.436 1 1 E : failed to get standby led pin assign 01-01 08:00:02.441 1 1 E : failed to get network led pin assign 01-01 08:00:02.447 1 1 E : failed to get gpio_sdcard_reused assign 01-01 08:00:02.453 1 1 E : get config err! 01-01 08:00:02.457 1 1 I : [DISP]disp_module_init 01-01 08:00:02.457 1 1 I disp 1000000.disp: Adding to iommu group 0 01-01 08:00:02.458 1 1 D display_fb_request,fb_id: 0 01-01 08:00:02.466 1 1 I : [DISP]disp_module_init finish 01-01 08:00:02.466 1 1 I rtc_ccu : sunxi ccu init OK 01-01 08:00:02.467 1 1 W : sunxi_sid_init()737 - insmod ok 01-01 08:00:02.467 1 1 I Serial : 8250/16550 driver, 4 ports, IRQ sharing disabled 01-01 08:00:02.469 1 1 I : misc dump reg init 01-01 08:00:02.469 1 1 I g2d 1480000.g2d: Adding to iommu group 0 01-01 08:00:02.470 1 1 I G2D : Module initialized.major:246 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: Adding to iommu group 0 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: version[1.0.0], ip=0x0 01-01 08:00:02.470 1 1 I : Gralloc Module initialized. 01-01 08:00:02.470 13 13 W cacheinfo: Unable to detect cache hierarchy for CPU 0 01-01 08:00:02.475 1 1 I brd : module loaded 01-01 08:00:02.478 1 1 I loop : module loaded 01-01 08:00:02.479 1 1 I zram : Added device: zram0 01-01 08:00:02.479 1 1 E : [NAND][NE] Not found valid nand node on dts 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: success. 01-01 08:00:02.487 1 1 I libphy : Fixed MDIO Bus: probed 01-01 08:00:02.487 1 1 I tun : Universal TUN/TAP device driver, 1.6 01-01 08:00:02.487 1 1 I : PPP generic driver version 2.4.2 01-01 08:00:02.487 1 1 I : PPP BSD Compression module registered 01-01 08:00:02.487 1 1 I : PPP Deflate Compression module registered 01-01 08:00:02.487 1 1 I : PPP MPPE Compression module registered 01-01 08:00:02.487 1 1 I NET : Registered protocol family 24 01-01 08:00:02.487 1 1 I : PPTP driver version 0.8.5 01-01 08:00:02.488 1 1 I ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 01-01 08:00:02.488 1 1 I ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver uas 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb-storage 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-alauda 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-cypress 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-datafab 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums_eneub6250 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-freecom 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-isd200 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-jumpshot 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-karma 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-onetouch 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-realtek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr09 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr55 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-usbat 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver xpad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb_acecad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver aiptek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver gtco 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver hanwang 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver kbtab 01-01 08:00:02.489 1 1 E axp2101_pek: axp2101-pek can not register without irq 01-01 08:00:02.496 1 1 W axp2101-pek: probe of axp2101-pek.0 failed with error -22 01-01 08:00:02.496 1 1 E sunxi-rtc 7000000.rtc: reset_control_get() failed 01-01 08:00:02.503 1 1 W sunxi-rtc 7000000.rtc: Fail to get clock 'rtc-spi' 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: registered as rtc0 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: sunxi rtc probed 01-01 08:00:02.504 1 1 I : i2c /dev entries driver 01-01 08:00:02.504 1 1 I : IR NEC protocol handler initialized 01-01 08:00:02.504 1 1 I : IR RC5(x/sz) protocol handler initialized 01-01 08:00:02.504 1 1 I uvcvideo: Unable to create debugfs directory 01-01 08:00:02.504 1 1 I usbcore : registered new interface driver uvcvideo 01-01 08:00:02.504 1 1 I : USB Video Class driver (1.1.1) 01-01 08:00:02.504 1 1 D : sunxi cedar version 1.1 01-01 08:00:02.504 1 1 I sunxi-cedar 1c0e000.ve: Adding to iommu group 0 01-01 08:00:02.504 1 1 D VE : install start!!! 01-01 08:00:02.504 1 1 I VE : cedar-ve the get irq is 20 01-01 08:00:02.504 1 1 D VE : install end!!! 01-01 08:00:02.505 1 1 I sunxi-cedar soc@3000000: ve1@1c0e000: Adding to iommu group 0 01-01 08:00:02.505 1 1 I VE : device ve1 just use to add iommu master 01-01 08:00:02.505 1 1 I sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 01-01 08:00:02.505 1 1 I device-mapper: uevent: version 1.0.3 01-01 08:00:02.506 1 1 I device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com 01-01 08:00:02.507 1 1 I hidraw : raw HID events driver (C) Jiri Kosina 01-01 08:00:02.509 1 1 I usbcore : registered new interface driver usbhid 01-01 08:00:02.509 1 1 I usbhid : USB HID core driver 01-01 08:00:02.509 1 1 I ashmem : initialized 01-01 08:00:02.510 1 1 I optee : probing for conduit method from DT. 01-01 08:00:02.510 1 1 I optee : revision 2.5 01-01 08:00:02.510 1 1 I optee : initialized driver 01-01 08:00:02.510 1 1 D : drm_base=0x40000000 01-01 08:00:02.510 1 1 D : drm_size=0x0 01-01 08:00:02.510 1 1 D : tee_base=0x2000000 01-01 08:00:02.510 1 1 I usbcore : registered new interface driver snd-usb-audio 01-01 08:00:02.511 1 1 I netem : version 1.3 01-01 08:00:02.511 1 1 I : u32 classifier 01-01 08:00:02.511 1 1 I : input device check on 01-01 08:00:02.511 1 1 I : Actions configured 01-01 08:00:02.511 1 1 I xt_time : kernel timezone is -0000 01-01 08:00:02.511 1 1 I ipip : IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I gre : GRE over IPv4 demultiplexor driver 01-01 08:00:02.512 1 1 I ip_gre : GRE over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I : IPv4 over IPsec tunneling driver 01-01 08:00:02.513 1 1 I : Initializing XFRM netlink socket 01-01 08:00:02.513 1 1 I : IPsec XFRM device driver 01-01 08:00:02.513 1 1 I NET : Registered protocol family 10 01-01 08:00:02.514 1 1 I : Segment Routing with IPv6 01-01 08:00:02.514 1 1 I mip6 : Mobile IPv6 01-01 08:00:02.515 1 1 I sit : IPv6, IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.515 1 1 I ip6_gre : GRE over IPv6 tunneling driver 01-01 08:00:02.516 1 1 I NET : Registered protocol family 17 01-01 08:00:02.516 1 1 I NET : Registered protocol family 15 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM TTY layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM socket layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM ver 1.11 01-01 08:00:02.516 1 1 I Bluetooth: HIDP (Human Interface Emulation) ver 1.2 01-01 08:00:02.516 1 1 I Bluetooth: HIDP socket layer initialized 01-01 08:00:02.516 1 1 I l2tp_core: L2TP core driver, V2.0 01-01 08:00:02.516 1 1 I l2tp_ppp: PPPoL2TP kernel driver, V2.0 01-01 08:00:02.516 1 1 I tipc : Activated (version 2.0.0) 01-01 08:00:02.516 1 1 I NET : Registered protocol family 30 01-01 08:00:02.516 1 1 I tipc : Started in single node mode 01-01 08:00:02.516 1 1 I : registered taskstats version 1 01-01 08:00:02.516 1 1 I : Loading compiled-in X.509 certificates 01-01 08:00:02.516 1 1 I : Key type ._fscrypt registered 01-01 08:00:02.516 1 1 I : Key type .fscrypt registered 01-01 08:00:02.516 1 1 I : Key type fscrypt-provisioning registered 01-01 08:0Gatekeeper_TA_CreateEntryPoint0:02.517 1 1 I : HDMI 2.0 driver init start! 01-01 08:00:02.517 1 1 I : boot_hdmi=false 01-01 08:00:02.518 1 1 I : Can not find the node of esm 01-01 08:00:02.518 1 1 E : ERROR: pinctrl_get for HDMI2.0 DDC fail 01-01 08:00:02.524 1 1 I Get hdmi_power0: aldo1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply aldo1 not found, using dummy regulator 01-01 08:00:02.524 1 1 I Get hdmi_power1: dcdc1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply dcdc1 not found, using dummy regulator 01-01 08:00:02.526 1 1 I : hdmi_cec_init 01-01 08:00:02.526 1 1 I : HDMI2.0 module init end 01-01 08:00:02.526 1 1 E : tv_probe()1574 - of_property_read_string tv_power failed! 01-01 08:00:02.534 1 1 D : tv probe finished! 01-01 08:00:03.160 17 17 I [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 01-01 08:00:03.840 0 0 I [ C0] random: fast init done 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 456: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 474: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 235: 01-01 08:00:04.209 17 17 W : attached ok, mgr0<-->dev0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 248: 01-01 08:00:04.209 17 17 W type : 4,mode:10,fmt:rgb,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8 01-01 08:00:04.215 33 33 I sun50iw9-pinctrl 300b000.pinctrl: initialized sunXi PIO driver 01-01 08:00:04.216 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: ***ctl-spec-caps*** 308 01-01 08:00:04.216 33 33 E sunxi-mmc 4022000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vdmmc regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd18sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq18sw regulator found 01-01 08:00:04.224 33 33 W sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.225 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.238 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.250 33 33 I sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.251 33 33 E sunxi-mmc 4020000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.258 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vqmmc regulator found 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vdmmc regulator found 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: Got CD GPIO 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator 01-01 08:00:04.261 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.262 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.274 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.285 33 33 I sunxi-mmc 4020000.sdmmc: detmode:gpio irq 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.285 33 33 E sunxi-mmc 4021000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.292 130 130 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vdmmc regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd18sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq18sw regulator found 01-01 08:00:04.293 33 33 W sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.294 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.301 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.304 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.315 33 33 I sunxi-mmc 4021000.sdmmc: detmode:manually by software 01-01 08:00:04.315 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator 01-01 08:00:04.315 33 33 E uart0 : get regulator failed 01-01 08:00:04.321 33 33 W uart0 : uart0 supply uart not found, using dummy regulator 01-01 08:00:04.321 33 33 E uart0 : uart0 error to get fifo size property 01-01 08:00:04.328 33 33 I uart0 : ttyAS0 at MMIO 0x5000000 (irq = 43, base_baud = 1500000) is a SUNXI 01-01 08:00:04.328 33 33 W : sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n 01-01 08:00:04.328 33 33 I printk : console [ttyAS0] enabled 01-01 08:00:04.328 33 33 I printk : bootconsole [uart8250] disabled 01-01 08:00:04.329 33 33 E uart1 : get regulator failed 01-01 08:00:04.329 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.334 33 33 W uart1 : uart1 supply uart not found, using dummy regulator 01-01 08:00:04.342 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.342 33 33 I uart1 : ttyAS1 at MMIO 0x5000400 (irq = 44, base_baud = 1500000) is a SUNXI 01-01 08:00:04.343 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.343 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA0 01-01 08:00:04.360 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.360 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA1 01-01 08:00:04.370 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA2 01-01 08:00:04.380 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA3 01-01 08:00:04.390 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.390 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA4 01-01 08:00:04.400 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.410 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.421 130 130 W sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range 01-01 08:00:04.421 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA5 01-01 08:00:04.431 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.441 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA6 01-01 08:00:04.451 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.462 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA7 01-01 08:00:04.472 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA8 01-01 08:00:04.482 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA9 01-01 08:00:04.491 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing LEGACY(SDR12) dt B 01-01 08:00:04.492 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pa not found, using dummy regulator 01-01 08:00:04.492 33 33 I : sunxi gmac driver's version: 1.0.0 01-01 08:00:04.492 33 33 I gmac-power0: NULL 01-01 08:00:04.492 33 33 I gmac-power1: NULL 01-01 08:00:04.492 33 33 I gmac-power2: NULL 01-01 08:00:04.493 33 33 E sunxi_ir_startup: get ir protocol failed 01-01 08:00:04.494 33 33 I : Registered IR keymap rc_map_sunxi 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.500 33 33 I rc0 : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0 01-01 08:00:04.500 33 33 I input : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0/s_cir_rx 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 52000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 33 33 E : failed to get standby led pin assign 01-01 08:00:04.508 33 33 E : failed to get network led pin assign 01-01 08:00:04.514 33 33 E : failed to get gpio_sdcard_reused assign 01-01 08:00:04.520 33 33 I : gpio_pin_1(230) gpio_is_valid 01-01 08:00:04.520 127 127 I mmc0 : new HS400 MMC card at address 0001 01-01 08:00:04.521 127 127 I mmcblk0 : mmc0:0001 AQB11T 14.6 GiB 01-01 08:00:04.521 127 127 I mmcblk0boot0: mmc0:0001 AQB11T partition 1 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0boot1: mmc0:0001 AQB11T partition 2 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0rpmb: mmc0:0001 AQB11T partition 3 4.00 MiB, chardev (244:0) 01-01 08:00:04.523 33 33 I gpio : 230, name: PH6, ret = 0 01-01 08:00:04.523 33 33 I : gpio-sunxi probe success 01-01 08:00:04.525 33 33 W energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 01-01 08:00:04.525 33 33 D energy_model: Created perf domain 0-3 01-01 08:00:04.525 127 127 I mmcblk0 : p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: codec_mach: 5096000.codec <-> soc@3000000:codec_plat mapping ok 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: ahub_dam_mach: snd-soc-dummy-dai <-> 5097000.ahub_dam_plat mapping ok 01-01 08:00:04.542 1 1 I sunxi-snd-mach soc@3000000: ahub1_mach: snd-soc-dummy-dai <-> soc@3000000:ahub1_plat mapping ok 01-01 08:00:04.543 1 1 I sunxi-snd-mach soc@3000000: ahub2_mach: snd-soc-dummy-dai <-> soc@3000000:ahub2_plat mapping ok 01-01 08:00:04.544 1 1 I cfg80211: Loading compiled-in X.509 certificates for regulatory database 01-01 08:00:04.545 1 1 I cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 01-01 08:00:04.545 34 34 W platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 01-01 08:00:04.545 34 34 W platform regulatory.0: Falling back to sysfs fallback for: regulatory.db 01-01 08:00:04.545 1 1 W clk : Not disabling unused clocks 01-01 08:00:04.545 1 1 E : get_key_map_info()187 - Failed to find "oe" in dts. 01-01 08:00:04.553 0 0 E : [ C0] sunxi-i2c sunxi-i2c5: SLA+W has been transmitted; ACK not received 01-01 08:00:04.562 1 1 E sunxi-i2c5: engine-mode: xfer failed(dev addr:0x10) 01-01 08:00:04.570 1 1 I : of_property_read_string ac200.tv_regulator_name fail 01-01 08:00:04.570 1 1 E : [ac200] get ave_regulator_name failed! 01-01 08:00:04.576 1 1 E : [ac200] pwm enable 01-01 08:00:04.581 1 1 I : ALSA device list: 01-01 08:00:04.581 1 1 I : #0: audiocodec 01-01 08:00:04.581 1 1 I : #1: ahubdam 01-01 08:00:04.581 1 1 I : #2: ahubhdmi 01-01 08:00:04.581 1 1 I : #3: ahubi2s2 01-01 08:00:04.581 1 1 W alloc_fd: slot 0 not NULL! 01-01 08:00:04.581 1 1 I : Freeing unused kernel memory: 1024K 01-01 08:00:04.596 1 1 E : Kernel init done 01-01 08:00:04.600 1 1 I : Run /init as init process 01-01 08:00:04.672 1 1 I init : init first stage started! 01-01 08:00:04.673 1 1 I init : Unable to open /lib/modules, skipping module loading. 01-01 08:00:04.673 1 1 I init : Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop 01-01 08:00:04.673 1 1 I init : Switching root to '/first_stage_ramdisk' 01-01 08:00:04.674 1 1 I init : [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt 01-01 08:00:04.676 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:04.693 1 1 I init : [libfs_mgr]Invalid ext4 superblock on '/dev/block/by-name/metadata' 01-01 08:00:04.694 1 1 E EXT4-fs (mmcblk0p19): VFS: Can't find ext4 filesystem 01-01 08:00:04.702 1 1 I init : [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=-1: Invalid argument 01-01 08:00:04.703 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Created logical partition system_a on device /dev/block/dm-0 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Skipping zero-length logical partition: system_b 01-01 08:00:04.704 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.705 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.711 1 1 I EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.718 1 1 I EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.721 1 1 I EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.724 1 1 I EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.730 1 1 I newfs_msdos: executing /system/bin/newfs_msdos failed: No such file or directory 01-01 08:00:04.731 1 1 I newfs_msdos: newfs_msdos terminated by exit(255) 01-01 08:00:04.732 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:04.739 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:04.770 1 1 W printk : init: 21 output lines suppressed due to ratelimiting 01-01 08:00:04.936 1 1 W init : DM_DEV_STATUS failed for system_ext_a: No such device or address 01-01 08:00:04.936 1 1 E init : Could not update logical partition 01-01 08:00:04.942 1 1 I init : Opening SELinux policy 01-01 08:00:04.952 1 1 I init : Loading SELinux policy 01-01 08:00:04.973 1 1 I SELinux : Permission nlmsg_getneigh in class netlink_route_socket not defined in policy. 01-01 08:00:04.973 1 1 I SELinux : the above unknown classes and permissions will be denied 01-01 08:00:04.973 1 1 I SELinux : policy capability network_peer_controls=1 01-01 08:00:04.973 1 1 I SELinux : policy capability open_perms=1 01-01 08:00:04.973 1 1 I SELinux : policy capability extended_socket_class=1 01-01 08:00:04.973 1 1 I SELinux : policy capability always_check_network=0 01-01 08:00:04.973 1 1 I SELinux : policy capability cgroup_seclabel=0 01-01 08:00:04.973 1 1 I SELinux : policy capability nnp_nosuid_transition=1 01-01 08:00:04.996 173 173 W auditd : type=1403 audit(0.0:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 01-01 08:00:05.008 1 1 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.008 1 1 I selinux : 01-01 08:00:05.085 1 1 I init : init second stage started! 01-01 08:00:05.086 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:05.094 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:05.094 1 1 E init : mount media_data fail*****Invalid argument 01-01 08:00:05.160 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:05.167 1 1 W init : Overriding previous property 'persist.sys.usb.config':'none' with new value 'adb' 01-01 08:00:05.168 1 1 W init : Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none' 01-01 08:00:05.168 1 1 W init : Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.174 1 1 W init : Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.176 1 1 W init : Couldn't load property file '/oem/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.177 1 1 E init : Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.191 1 1 E init : Could not set 'ro.boot.dynamic_partitions_retrofit' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.328 1 1 E cgroup1 : Unknown subsys name 'blkio' 01-01 08:00:05.337 1 1 E cgroup1 : Unknown subsys name 'memory' 01-01 08:00:06.010 175 175 W SELinux : Multiple same specifications for softwinner\.multiir. 01-01 08:00:05.548 161 161 I ueventd : ueventd started! 01-01 08:00:06.011 177 177 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.011 177 177 I SELinux : /vendor/etc/selinux/vndservice_contexts 01-01 08:00:05.553 161 161 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.553 161 161 I selinux : 01-01 08:00:05.553 161 161 I ueventd : Parsing file /system/etc/ueventd.rc... 01-01 08:00:05.553 161 161 I ueventd : Added '/vendor/etc/ueventd.rc' to import list 01-01 08:00:05.553 161 161 I ueventd : Added '/odm/etc/ueventd.rc' to import list 01-01 08:00:05.554 161 161 I ueventd : Parsing file /vendor/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.554 161 161 I ueventd : Parsing file /odm/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.797 158 158 I sunxi-rfkill soc@3000000: rfkill: module version: v1.0.9 01-01 08:00:05.797 158 158 W sunxi-rfkill soc@3000000: rfkill: pinctrl_lookup_state(default) failed! return ffffffffffffffed 01-01 08:00:05.797 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio chip_en failed 01-01 08:00:05.805 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio power_en failed 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_busnum (1) 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing wlan_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_regon gpio=210 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_hostwake gpio=207 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wakeup source is enabled 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing bt_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: bt_rst gpio=211 assert=0 01-01 08:00:05.892 124 124 I : hdmi_hpd_sys_config_release 01-01 08:00:05.933 1 1 I : Registered swp emulation handler 01-01 08:00:05.977 173 173 I logd.auditd: start 01-01 08:00:06.013 175 175 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.013 175 175 I SELinux : /system/etc/selinux/plat_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /system_ext/etc/selinux/system_ext_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /vendor/etc/selinux/vendor_service_contexts 01-01 08:00:06.017 176 176 I hwservicemanager: getFrameworkHalManifest: Reading VINTF information. 01-01 08:00:06.028 176 176 I hwservicemanager: getDeviceHalManifest: Reading VINTF information. 01-01 08:00:06.032 185 185 I format_device: Start format /dev/block/by-name/Reserve0 01-01 08:00:06.033 189 189 I format_device: fork to format /dev/block/by-name/Reserve0 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: F2FS-tools: mkfs.f2fs Ver: 1.14.0 (2020-08-24) 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: Info: Disable heap-based policy 01-01 08:00:06.046 1 1 I make_f2fs: Info: Debug level = 1 01-01 08:00:06.046 1 1 I make_f2fs: Info: Trim is enabled 01-01 08:00:06.046 1 1 I make_f2fs: Info: Set conf for android 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable utf8 with casefolding 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable Project quota 01-01 08:00:06.048 1 1 I make_f2fs: Info: No support kernel version! 01-01 08:00:06.049 176 176 I hwservicemanager: getDeviceHalManifest: Successfully processed VINTF information 01-01 08:00:06.049 176 176 I hwservicemanager: getFrameworkHalManifest: Successfully processed VINTF information 01-01 08:00:06.051 176 176 I hwservicemanager: hwservicemanager is ready now. 01-01 08:00:06.056 185 185 I format_device: format /dev/block/by-name/Reserve0 ok
目前排查到应该是sdio问题,sdio3.0的话无法注册wifi,sdio2.0可以注册,但是项目需要支持sdio3.0的,目前是安卓12内核5.4的,sdio3.0怎么才能用呢
-
h618怎么才能支持sdio 3.0模式
全志sdio,打开sdio 3.0就注册不了wifi,这是为啥呢?有大佬知道吗?
打开sdio 3.0模式就报这个错误:sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range -
h618 sdio频率一直是400k
h618安卓12的sdio一直是400k,wifi起不来,有知道的大佬帮忙看看吗?
日志:--------- beginning of main 01-01 08:00:05.964 174 174 W lowmemorykiller: LMKD : whitelist android.signature.cts.api.hiddenapi_blacklist_api_27;android.signature.cts.api.hiddenapi_blacklist_api_28;android.signature.cts.api.hiddenapi_blacklist_current;android.media.cts;android.process.media;com.antutu.ABenchMark;com.antutu.benchmark.full;com.antutu.benchmark.full:unity;com.antutu.ABenchMark:push;com.futuremark.dmandroid.application;com.allwinner.batterytest;cn.xender;com.socialnmobile.dictapps.notepad.color.note;org.videolan.vlc; 01-01 08:00:05.964 174 174 I lowmemorykiller: Using psi monitors for memory pressure detection 01-01 08:00:05.966 174 174 I lowmemorykiller: Process polling is supported --------- beginning of kernel 01-01 08:00:02.196 0 0 I : Booting Linux on physical CPU 0x0000000000 [0x410fd034] 01-01 08:00:02.196 0 0 I : Linux version 5.4.125+ (robin@robin) (Android (7485623, based on r416183b1) clang version 12.0.7 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.7 (/buildbot/src/android/llvm-r416183/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #3 SMP PREEMPT Tue Dec 10 15:33:55 CST 2024 01-01 08:00:02.196 0 0 I Machine model: sun50iw9 01-01 08:00:02.196 0 0 I earlycon: uart8250 at MMIO32 0x0000000005000000 (options '') 01-01 08:00:02.196 0 0 I printk : bootconsole [uart8250] enabled 01-01 08:00:02.196 0 0 I cma : Reserved 8 MiB at 0x00000000bf800000 01-01 08[ 8.365780][ T248] cutils-trace: Error opening trace file: No such file or directory (2) :00:02.196 0 0 D : On node 0 totalpages: 524288 01-01 08:00:02.196 0 0 D DMA32 zone: 8192 pages used for memmap 01-01 08:00:02.196 0 0 D DMA32 zone: 0 pages reserved 01-01 08:00:02.196 0 0 D DMA32 zone: 524288 pages, LIFO batch:63 01-01 08:00:02.196 0 0 I psci : probing for conduit method from DT. 01-01 08:00:02.196 0 0 I psci : PSCIv1.0 detected in firmware. 01-01 08:00:02.196 0 0 I psci : Using standard PSCI v0.2 function IDs 01-01 08:00:02.196 0 0 I psci : Trusted OS migration not required 01-01 08:00:02.196 0 0 I psci : SMC Calling Convention v1.0 01-01 08:00:02.196 0 0 I percpu : Embedded 22 pages/cpu s49944 r8192 d31976 u90112 01-01 08:00:02.196 0 0 D pcpu-alloc: s49944 r8192 d31976 u90112 alloc=22*4096 01-01 08:00:02.196 0 0 D pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 01-01 08:00:02.196 0 0 I : Detected VIPT I-cache on CPU0 01-01 08:00:02.196 0 0 I CPU features: detected: ARM erratum 845719 01-01 08:00:02.196 0 0 I : Built 1 zonelists, mobility grouping on. Total pages: 516096 01-01 08:00:02.196 0 0 I : Kernel command line: earlycon=uart8250,mmio32,0x05000000 clk_ignore_unused initcall_debug=0 console=ttyAS0,115200 loglevel=4 root=/dev/mmcblk0p4 init=/init cma=8M snum=0c001050010248d1f91 mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.force_normal_boot=1 androidboot.slot_suffix=_a androidboot.vbmeta.avb_version=2.0 androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=7872 androidboot.vbmeta.digest=5b1037089489ad2fa0c62cd98e9ae2801bc6e393fd0b59a89d303bac5f3f4f8e androidboot.vbmeta.device_state=locked androidboot.veritymode=enforcing androidboot.mode=normal androidboot.serialno=0c001050010248d1f91 androidboot.hardware=sun50iw9p1 boot_type=2 androidboot.boot_type=2 androidboot.secure_os_exist=1 androidboot.trustchain=false androidboot.drmkey=false gpt=1 uboot_message=2018.07-gb99798b(04/04/2023-13:23:26) mbr_offset=1032192 disp_reserve=3686400,0xbbf21000 bootreason=unknow androidboot.dramfreq=720 androidboot.dramsize=2048 loop.max_part=4 android 01-01 08:00:02.196 0 0 I : Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) 01-01 08:00:02.196 0 0 I : Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) 01-01 08:00:02.196 0 0 I mem auto-init: stack:off, heap alloc:off, heap free:off 01-01 08:00:02.196 0 0 I Memory : 1990540K/2097152K available (14076K kernel code, 1366K rwdata, 5684K rodata, 1024K init, 778K bss, 98420K reserved, 8192K cma-reserved) 01-01 08:00:02.196 0 0 I SLUB : HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 01-01 08:00:02.196 0 0 I rcu : Preemptible hierarchical RCU implementation. 01-01 08:00:02.196 0 0 I : Tasks RCU enabled. 01-01 08:00:02.196 0 0 I rcu : RCU calculated value of scheduler-enlistment delay is 25 jiffies. 01-01 08:00:02.196 0 0 I NR_IRQS : 64, nr_irqs: 64, preallocated irqs: 0 01-01 08:00:02.196 0 0 I kfence : initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) 01-01 08:00:02.196 0 0 I random : get_random_bytes called from start_kernel+0x224/0x434 with crng_init=0 01-01 08:00:02.196 0 0 I arch_timer: cp15 timer(s) running at 24.00MHz (virt). 01-01 08:00:02.196 0 0 I clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 01-01 08:00:02.196 0 0 I sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 01-01 08:00:02.197 0 0 I clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 01-01 08:00:02.197 0 0 I : Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) 01-01 08:00:02.197 0 0 I pid_max : default: 32768 minimum: 301 01-01 08:00:02.197 0 0 I LSM : Security Framework initializing 01-01 08:00:02.197 0 0 I SELinux : Initializing. 01-01 08:00:02.197 0 0 I : Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.197 0 0 I : Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) 01-01 08:00:02.198 1 1 I : ASID allocator initialised with 32768 entries 01-01 08:00:02.198 1 1 I rcu : Hierarchical SRCU implementation. 01-01 08:00:02.201 1 1 E BOOTEVENT: 4.206998: ON 01-01 08:00:02.206 1 1 I smp : Bringing up secondary CPUs ... 01-01 08:00:02.206 0 0 I : Detected VIPT I-cache on CPU1 01-01 08:00:02.206 0 0 I CPU1 : Booted secondary processor 0x0000000001 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU2 01-01 08:00:02.207 0 0 I CPU2 : Booted secondary processor 0x0000000002 [0x410fd034] 01-01 08:00:02.207 0 0 I : Detected VIPT I-cache on CPU3 01-01 08:00:02.207 0 0 I CPU3 : Booted secondary processor 0x0000000003 [0x410fd034] 01-01 08:00:02.207 1 1 I smp : Brought up 1 node, 4 CPUs 01-01 08:00:02.207 1 1 I SMP : Total of 4 processors activated. 01-01 08:00:02.207 1 1 I CPU features: detected: 32-bit EL0 Support 01-01 08:00:02.207 1 1 I CPU features: detected: CRC32 instructions 01-01 08:00:02.207 1 1 I CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching 01-01 08:00:02.207 1 1 I : CPU: All CPU(s) started at EL1 01-01 08:00:02.207 12 12 I alternatives: patching kernel code 01-01 08:00:02.208 1 1 I CPU3 : update max cpu_capacity 1024 01-01 08:00:02.209 1 1 I devtmpfs: initialized 01-01 08:00:02.210 0 0 I [ C1] CPU1: update max cpu_capacity 1024 01-01 08:00:02.217 1 1 I : Registered cp15_barrier emulation handler 01-01 08:00:02.217 1 1 I : Registered setend emulation handler 01-01 08:00:02.217 1 1 I clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 01-01 08:00:02.217 1 1 I : futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 01-01 08:00:02.217 1 1 I pinctrl core: initialized pinctrl subsystem 01-01 08:00:02.218 1 1 I NET : Registered protocol family 16 01-01 08:00:02.220 1 1 I DMA : preallocated 256 KiB pool for atomic allocations 01-01 08:00:02.220 1 1 I audit : initializing netlink subsys (disabled) 01-01 08:00:00.020 173 173 W auditd : type=2000 audit(0.0:1): state=initialized audit_enabled=0 res=1 01-01 08:00:02.220 1 1 I cpuidle : using governor menu 01-01 08:00:02.220 1 1 I hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 01-01 08:00:02.243 1 1 I ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 I r_ccu : sunxi ccu init OK 01-01 08:00:02.243 1 1 D : Sunxi ccu sun50iw9-r init OK 01-01 08:00:02.243 1 1 I sun50iw9-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver 01-01 08:00:02.252 1 1 I cryptd : max_cpu_qlen set to 1000 01-01 08:00:02.263 1 1 I iommu : Default domain type: Translated 01-01 08:00:02.263 1 1 I sunxi iommu: irq = 39 01-01 08:00:02.264 1 1 I : SCSI subsystem initialized 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver usbfs 01-01 08:00:02.264 1 1 I usbcore : registered new interface driver hub 01-01 08:00:02.264 1 1 I usbcore : registered new device driver usb 01-01 08:00:02.264 1 1 I videodev: Linux video capture interface: v2.00 01-01 08:00:02.265 1 1 I : Advanced Linux Sound Architecture Driver Initialized. 01-01 08:00:02.265 1 1 I Bluetooth: Core ver 2.22 01-01 08:00:02.265 1 1 I NET : Registered protocol family 31 01-01 08:00:02.265 1 1 I Bluetooth: HCI device and connection manager initialized 01-01 08:00:02.265 1 1 I Bluetooth: HCI socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: L2CAP socket layer initialized 01-01 08:00:02.265 1 1 I Bluetooth: SCO socket layer initialized 01-01 08:00:02.265 1 1 I : pwm module init! 01-01 08:00:02.266 1 1 W sun50iw9-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator 01-01 08:00:02.266 1 1 W sunxi-i2c5: sunxi-i2c5 supply twi not found, using dummy regulator 01-01 08:00:02.267 1 1 I axp20x-i2c 5-0036: AXP20x variant AXP1530 found 01-01 08:00:02.269 1 1 I axp1530-dcdc1: supplied by regulator-dummy 01-01 08:00:02.269 1 1 I axp1530-dcdc2: supplied by regulator-dummy 01-01 08:00:02.270 1 1 I axp1530-dcdc3: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-aldo1: supplied by regulator-dummy 01-01 08:00:02.271 1 1 I axp1530-dldo1: supplied by regulator-dummy 01-01 08:00:02.272 1 1 I axp20x-i2c 5-0036: AXP20X driver loaded 01-01 08:00:02.272 1 1 I sunxi-i2c5: probe success 01-01 08:00:02.272 1 1 I clocksource: Switched to clocksource arch_sys_counter 01-01 08:00:02.273 1 1 I VFS : Disk quotas dquot_6.6.0 01-01 08:00:02.273 1 1 I VFS : Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'step_wise' 01-01 08:00:02.274 1 1 I thermal_sys: Registered thermal governor 'power_allocator' 01-01 08:00:02.274 1 1 I NET : Registered protocol family 2 01-01 08:00:02.275 1 1 I : IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) 01-01 08:00:02.275 1 1 I : tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) 01-01 08:00:02.275 1 1 I : TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) 01-01 08:00:02.276 1 1 I TCP : Hash tables configured (established 16384 bind 16384) 01-01 08:00:02.276 1 1 I : UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I : UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) 01-01 08:00:02.276 1 1 I NET : Registered protocol family 1 01-01 08:00:02.276 1 1 I RPC : Registered named UNIX socket transport module. 01-01 08:00:02.276 1 1 I RPC : Registered udp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp transport module. 01-01 08:00:02.276 1 1 I RPC : Registered tcp NFSv4.1 backchannel transport module. 01-01 08:00:02.277 1 1 I NET : Registered protocol family 44 01-01 08:00:02.277 1 1 I : Trying to unpack rootfs image as initramfs... 01-01 08:00:02.394 1 1 I : Freeing initrd memory: 12456K 01-01 08:00:02.398 1 1 I : Initialise system trusted keyrings 01-01 08:00:02.398 1 1 I workingset: timestamp_bits=62 max_order=19 bucket_order=0 01-01 08:00:02.402 1 1 I : Key type cifs.idmap registered 01-01 08:00:02.402 1 1 I fuse : init (API version 7.31) 01-01 08:00:02.434 1 1 I NET : Registered protocol family 38 01-01 08:00:02.434 1 1 I : Key type asymmetric registered 01-01 08:00:02.434 1 1 I : Asymmetric key parser 'x509' registered 01-01 08:00:02.434 1 1 I : Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) 01-01 08:00:02.434 1 1 I : io scheduler mq-deadline registered 01-01 08:00:02.434 1 1 I : io scheduler kyber registered 01-01 08:00:02.434 1 1 I atomic64_test: passed 01-01 08:00:02.436 1 1 E : failed to get standby led pin assign 01-01 08:00:02.441 1 1 E : failed to get network led pin assign 01-01 08:00:02.447 1 1 E : failed to get gpio_sdcard_reused assign 01-01 08:00:02.453 1 1 E : get config err! 01-01 08:00:02.457 1 1 I : [DISP]disp_module_init 01-01 08:00:02.457 1 1 I disp 1000000.disp: Adding to iommu group 0 01-01 08:00:02.458 1 1 D display_fb_request,fb_id: 0 01-01 08:00:02.466 1 1 I : [DISP]disp_module_init finish 01-01 08:00:02.466 1 1 I rtc_ccu : sunxi ccu init OK 01-01 08:00:02.467 1 1 W : sunxi_sid_init()737 - insmod ok 01-01 08:00:02.467 1 1 I Serial : 8250/16550 driver, 4 ports, IRQ sharing disabled 01-01 08:00:02.469 1 1 I : misc dump reg init 01-01 08:00:02.469 1 1 I g2d 1480000.g2d: Adding to iommu group 0 01-01 08:00:02.470 1 1 I G2D : Module initialized.major:246 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: Adding to iommu group 0 01-01 08:00:02.470 1 1 I deinterlace 1420000.deinterlace: version[1.0.0], ip=0x0 01-01 08:00:02.470 1 1 I : Gralloc Module initialized. 01-01 08:00:02.470 13 13 W cacheinfo: Unable to detect cache hierarchy for CPU 0 01-01 08:00:02.475 1 1 I brd : module loaded 01-01 08:00:02.478 1 1 I loop : module loaded 01-01 08:00:02.479 1 1 I zram : Added device: zram0 01-01 08:00:02.479 1 1 E : [NAND][NE] Not found valid nand node on dts 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 01-01 08:00:02.486 1 1 D [ADDR_MGT] addr_mgt_probe: success. 01-01 08:00:02.487 1 1 I libphy : Fixed MDIO Bus: probed 01-01 08:00:02.487 1 1 I tun : Universal TUN/TAP device driver, 1.6 01-01 08:00:02.487 1 1 I : PPP generic driver version 2.4.2 01-01 08:00:02.487 1 1 I : PPP BSD Compression module registered 01-01 08:00:02.487 1 1 I : PPP Deflate Compression module registered 01-01 08:00:02.487 1 1 I : PPP MPPE Compression module registered 01-01 08:00:02.487 1 1 I NET : Registered protocol family 24 01-01 08:00:02.487 1 1 I : PPTP driver version 0.8.5 01-01 08:00:02.488 1 1 I ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 01-01 08:00:02.488 1 1 I ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver uas 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb-storage 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-alauda 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-cypress 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-datafab 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums_eneub6250 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-freecom 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-isd200 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-jumpshot 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-karma 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-onetouch 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-realtek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr09 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-sddr55 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver ums-usbat 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver xpad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver usb_acecad 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver aiptek 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver gtco 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver hanwang 01-01 08:00:02.488 1 1 I usbcore : registered new interface driver kbtab 01-01 08:00:02.489 1 1 E axp2101_pek: axp2101-pek can not register without irq 01-01 08:00:02.496 1 1 W axp2101-pek: probe of axp2101-pek.0 failed with error -22 01-01 08:00:02.496 1 1 E sunxi-rtc 7000000.rtc: reset_control_get() failed 01-01 08:00:02.503 1 1 W sunxi-rtc 7000000.rtc: Fail to get clock 'rtc-spi' 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: registered as rtc0 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2) 01-01 08:00:02.503 1 1 I sunxi-rtc 7000000.rtc: sunxi rtc probed 01-01 08:00:02.504 1 1 I : i2c /dev entries driver 01-01 08:00:02.504 1 1 I : IR NEC protocol handler initialized 01-01 08:00:02.504 1 1 I : IR RC5(x/sz) protocol handler initialized 01-01 08:00:02.504 1 1 I uvcvideo: Unable to create debugfs directory 01-01 08:00:02.504 1 1 I usbcore : registered new interface driver uvcvideo 01-01 08:00:02.504 1 1 I : USB Video Class driver (1.1.1) 01-01 08:00:02.504 1 1 D : sunxi cedar version 1.1 01-01 08:00:02.504 1 1 I sunxi-cedar 1c0e000.ve: Adding to iommu group 0 01-01 08:00:02.504 1 1 D VE : install start!!! 01-01 08:00:02.504 1 1 I VE : cedar-ve the get irq is 20 01-01 08:00:02.504 1 1 D VE : install end!!! 01-01 08:00:02.505 1 1 I sunxi-cedar soc@3000000: ve1@1c0e000: Adding to iommu group 0 01-01 08:00:02.505 1 1 I VE : device ve1 just use to add iommu master 01-01 08:00:02.505 1 1 I sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 01-01 08:00:02.505 1 1 I device-mapper: uevent: version 1.0.3 01-01 08:00:02.506 1 1 I device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com 01-01 08:00:02.507 1 1 I hidraw : raw HID events driver (C) Jiri Kosina 01-01 08:00:02.509 1 1 I usbcore : registered new interface driver usbhid 01-01 08:00:02.509 1 1 I usbhid : USB HID core driver 01-01 08:00:02.509 1 1 I ashmem : initialized 01-01 08:00:02.510 1 1 I optee : probing for conduit method from DT. 01-01 08:00:02.510 1 1 I optee : revision 2.5 01-01 08:00:02.510 1 1 I optee : initialized driver 01-01 08:00:02.510 1 1 D : drm_base=0x40000000 01-01 08:00:02.510 1 1 D : drm_size=0x0 01-01 08:00:02.510 1 1 D : tee_base=0x2000000 01-01 08:00:02.510 1 1 I usbcore : registered new interface driver snd-usb-audio 01-01 08:00:02.511 1 1 I netem : version 1.3 01-01 08:00:02.511 1 1 I : u32 classifier 01-01 08:00:02.511 1 1 I : input device check on 01-01 08:00:02.511 1 1 I : Actions configured 01-01 08:00:02.511 1 1 I xt_time : kernel timezone is -0000 01-01 08:00:02.511 1 1 I ipip : IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I gre : GRE over IPv4 demultiplexor driver 01-01 08:00:02.512 1 1 I ip_gre : GRE over IPv4 tunneling driver 01-01 08:00:02.512 1 1 I : IPv4 over IPsec tunneling driver 01-01 08:00:02.513 1 1 I : Initializing XFRM netlink socket 01-01 08:00:02.513 1 1 I : IPsec XFRM device driver 01-01 08:00:02.513 1 1 I NET : Registered protocol family 10 01-01 08:00:02.514 1 1 I : Segment Routing with IPv6 01-01 08:00:02.514 1 1 I mip6 : Mobile IPv6 01-01 08:00:02.515 1 1 I sit : IPv6, IPv4 and MPLS over IPv4 tunneling driver 01-01 08:00:02.515 1 1 I ip6_gre : GRE over IPv6 tunneling driver 01-01 08:00:02.516 1 1 I NET : Registered protocol family 17 01-01 08:00:02.516 1 1 I NET : Registered protocol family 15 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM TTY layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM socket layer initialized 01-01 08:00:02.516 1 1 I Bluetooth: RFCOMM ver 1.11 01-01 08:00:02.516 1 1 I Bluetooth: HIDP (Human Interface Emulation) ver 1.2 01-01 08:00:02.516 1 1 I Bluetooth: HIDP socket layer initialized 01-01 08:00:02.516 1 1 I l2tp_core: L2TP core driver, V2.0 01-01 08:00:02.516 1 1 I l2tp_ppp: PPPoL2TP kernel driver, V2.0 01-01 08:00:02.516 1 1 I tipc : Activated (version 2.0.0) 01-01 08:00:02.516 1 1 I NET : Registered protocol family 30 01-01 08:00:02.516 1 1 I tipc : Started in single node mode 01-01 08:00:02.516 1 1 I : registered taskstats version 1 01-01 08:00:02.516 1 1 I : Loading compiled-in X.509 certificates 01-01 08:00:02.516 1 1 I : Key type ._fscrypt registered 01-01 08:00:02.516 1 1 I : Key type .fscrypt registered 01-01 08:00:02.516 1 1 I : Key type fscrypt-provisioning registered 01-01 08:0Gatekeeper_TA_CreateEntryPoint0:02.517 1 1 I : HDMI 2.0 driver init start! 01-01 08:00:02.517 1 1 I : boot_hdmi=false 01-01 08:00:02.518 1 1 I : Can not find the node of esm 01-01 08:00:02.518 1 1 E : ERROR: pinctrl_get for HDMI2.0 DDC fail 01-01 08:00:02.524 1 1 I Get hdmi_power0: aldo1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply aldo1 not found, using dummy regulator 01-01 08:00:02.524 1 1 I Get hdmi_power1: dcdc1 01-01 08:00:02.524 1 1 W : (NULL device *): deviceless supply dcdc1 not found, using dummy regulator 01-01 08:00:02.526 1 1 I : hdmi_cec_init 01-01 08:00:02.526 1 1 I : HDMI2.0 module init end 01-01 08:00:02.526 1 1 E : tv_probe()1574 - of_property_read_string tv_power failed! 01-01 08:00:02.534 1 1 D : tv probe finished! 01-01 08:00:03.160 17 17 I [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x4 cs:0x101 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 01-01 08:00:03.840 0 0 I [ C0] random: fast init done 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 456: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.185 17 17 W [DISP] de_rtmx_mgr_apply,line: 474: 01-01 08:00:04.185 17 17 W : ctx->output.hdr_type=0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 235: 01-01 08:00:04.209 17 17 W : attached ok, mgr0<-->dev0 01-01 08:00:04.209 17 17 W [DISP] disp_device_attached_and_enable,line: 248: 01-01 08:00:04.209 17 17 W type : 4,mode:10,fmt:rgb,bits:8bits,eotf:4,cs:257 dvi_hdmi:2, range:2 scan:0 ratio:8 01-01 08:00:04.215 33 33 I sun50iw9-pinctrl 300b000.pinctrl: initialized sunXi PIO driver 01-01 08:00:04.216 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.216 33 33 I sunxi-mmc 4022000.sdmmc: ***ctl-spec-caps*** 308 01-01 08:00:04.216 33 33 E sunxi-mmc 4022000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vdmmc regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vd18sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq33sw regulator found 01-01 08:00:04.224 33 33 I sunxi-mmc 4022000.sdmmc: No vq18sw regulator found 01-01 08:00:04.224 33 33 W sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.225 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.238 33 33 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.250 33 33 I sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.251 33 33 I sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.251 33 33 E sunxi-mmc 4020000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.258 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vqmmc regulator found 01-01 08:00:04.260 33 33 I sunxi-mmc 4020000.sdmmc: No vdmmc regulator found 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: Got CD GPIO 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.261 33 33 I sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator 01-01 08:00:04.261 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.262 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.274 33 33 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.285 33 33 I sunxi-mmc 4020000.sdmmc: detmode:gpio irq 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.20 2021-12-17 11:02) 01-01 08:00:04.285 33 33 I sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 01-01 08:00:04.285 33 33 E sunxi-mmc 4021000.sdmmc: sdmmc1111 device,check dts 01-01 08:00:04.292 130 130 I sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vdmmc regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vd18sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq33sw regulator found 01-01 08:00:04.293 33 33 I sunxi-mmc 4021000.sdmmc: No vq18sw regulator found 01-01 08:00:04.293 33 33 W sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed 01-01 08:00:04.294 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.298 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.301 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.304 33 33 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.315 33 33 I sunxi-mmc 4021000.sdmmc: detmode:manually by software 01-01 08:00:04.315 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator 01-01 08:00:04.315 33 33 E uart0 : get regulator failed 01-01 08:00:04.321 33 33 W uart0 : uart0 supply uart not found, using dummy regulator 01-01 08:00:04.321 33 33 E uart0 : uart0 error to get fifo size property 01-01 08:00:04.328 33 33 I uart0 : ttyAS0 at MMIO 0x5000000 (irq = 43, base_baud = 1500000) is a SUNXI 01-01 08:00:04.328 33 33 W : sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n 01-01 08:00:04.328 33 33 I printk : console [ttyAS0] enabled 01-01 08:00:04.328 33 33 I printk : bootconsole [uart8250] disabled 01-01 08:00:04.329 33 33 E uart1 : get regulator failed 01-01 08:00:04.329 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.334 33 33 W uart1 : uart1 supply uart not found, using dummy regulator 01-01 08:00:04.342 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.342 33 33 I uart1 : ttyAS1 at MMIO 0x5000400 (irq = 44, base_baud = 1500000) is a SUNXI 01-01 08:00:04.343 0 0 E : [ C0] sunxi-mmc 4021000.sdmmc: smc 2 p1 err, cmd 52, RTO !! 01-01 08:00:04.343 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA0 01-01 08:00:04.360 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.360 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA1 01-01 08:00:04.370 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA2 01-01 08:00:04.380 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA3 01-01 08:00:04.390 130 130 I sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 1 timing LEGACY(SDR12) dt B 01-01 08:00:04.390 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA4 01-01 08:00:04.400 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.410 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.421 130 130 W sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range 01-01 08:00:04.421 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA5 01-01 08:00:04.431 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.441 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA6 01-01 08:00:04.451 127 127 E sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) 01-01 08:00:04.462 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA7 01-01 08:00:04.472 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA8 01-01 08:00:04.482 33 33 E sun50iw9-pinctrl 300b000.pinctrl: unsupported function io_disabled on pin PA9 01-01 08:00:04.491 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing LEGACY(SDR12) dt B 01-01 08:00:04.492 33 33 W sun50iw9-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pa not found, using dummy regulator 01-01 08:00:04.492 33 33 I : sunxi gmac driver's version: 1.0.0 01-01 08:00:04.492 33 33 I gmac-power0: NULL 01-01 08:00:04.492 33 33 I gmac-power1: NULL 01-01 08:00:04.492 33 33 I gmac-power2: NULL 01-01 08:00:04.493 33 33 E sunxi_ir_startup: get ir protocol failed 01-01 08:00:04.494 33 33 I : Registered IR keymap rc_map_sunxi 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.500 33 33 I rc0 : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0 01-01 08:00:04.500 33 33 I input : sunxi-ir as /devices/platform/soc@3000000/7040000.s_cir/rc/rc0/s_cir_rx 01-01 08:00:04.500 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS200 dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.501 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 52000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS(SDR20) dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 127 127 I sunxi-mmc 4022000.sdmmc: sdc set ios:clk 100000000Hz bm PP pm ON vdd 23 width 8 timing MMC-HS400 dt B 01-01 08:00:04.502 33 33 E : failed to get standby led pin assign 01-01 08:00:04.508 33 33 E : failed to get network led pin assign 01-01 08:00:04.514 33 33 E : failed to get gpio_sdcard_reused assign 01-01 08:00:04.520 33 33 I : gpio_pin_1(230) gpio_is_valid 01-01 08:00:04.520 127 127 I mmc0 : new HS400 MMC card at address 0001 01-01 08:00:04.521 127 127 I mmcblk0 : mmc0:0001 AQB11T 14.6 GiB 01-01 08:00:04.521 127 127 I mmcblk0boot0: mmc0:0001 AQB11T partition 1 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0boot1: mmc0:0001 AQB11T partition 2 4.00 MiB 01-01 08:00:04.522 127 127 I mmcblk0rpmb: mmc0:0001 AQB11T partition 3 4.00 MiB, chardev (244:0) 01-01 08:00:04.523 33 33 I gpio : 230, name: PH6, ret = 0 01-01 08:00:04.523 33 33 I : gpio-sunxi probe success 01-01 08:00:04.525 33 33 W energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0 01-01 08:00:04.525 33 33 D energy_model: Created perf domain 0-3 01-01 08:00:04.525 127 127 I mmcblk0 : p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: codec_mach: 5096000.codec <-> soc@3000000:codec_plat mapping ok 01-01 08:00:04.541 1 1 I sunxi-snd-mach soc@3000000: ahub_dam_mach: snd-soc-dummy-dai <-> 5097000.ahub_dam_plat mapping ok 01-01 08:00:04.542 1 1 I sunxi-snd-mach soc@3000000: ahub1_mach: snd-soc-dummy-dai <-> soc@3000000:ahub1_plat mapping ok 01-01 08:00:04.543 1 1 I sunxi-snd-mach soc@3000000: ahub2_mach: snd-soc-dummy-dai <-> soc@3000000:ahub2_plat mapping ok 01-01 08:00:04.544 1 1 I cfg80211: Loading compiled-in X.509 certificates for regulatory database 01-01 08:00:04.545 1 1 I cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 01-01 08:00:04.545 34 34 W platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 01-01 08:00:04.545 34 34 W platform regulatory.0: Falling back to sysfs fallback for: regulatory.db 01-01 08:00:04.545 1 1 W clk : Not disabling unused clocks 01-01 08:00:04.545 1 1 E : get_key_map_info()187 - Failed to find "oe" in dts. 01-01 08:00:04.553 0 0 E : [ C0] sunxi-i2c sunxi-i2c5: SLA+W has been transmitted; ACK not received 01-01 08:00:04.562 1 1 E sunxi-i2c5: engine-mode: xfer failed(dev addr:0x10) 01-01 08:00:04.570 1 1 I : of_property_read_string ac200.tv_regulator_name fail 01-01 08:00:04.570 1 1 E : [ac200] get ave_regulator_name failed! 01-01 08:00:04.576 1 1 E : [ac200] pwm enable 01-01 08:00:04.581 1 1 I : ALSA device list: 01-01 08:00:04.581 1 1 I : #0: audiocodec 01-01 08:00:04.581 1 1 I : #1: ahubdam 01-01 08:00:04.581 1 1 I : #2: ahubhdmi 01-01 08:00:04.581 1 1 I : #3: ahubi2s2 01-01 08:00:04.581 1 1 W alloc_fd: slot 0 not NULL! 01-01 08:00:04.581 1 1 I : Freeing unused kernel memory: 1024K 01-01 08:00:04.596 1 1 E : Kernel init done 01-01 08:00:04.600 1 1 I : Run /init as init process 01-01 08:00:04.672 1 1 I init : init first stage started! 01-01 08:00:04.673 1 1 I init : Unable to open /lib/modules, skipping module loading. 01-01 08:00:04.673 1 1 I init : Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop 01-01 08:00:04.673 1 1 I init : Switching root to '/first_stage_ramdisk' 01-01 08:00:04.674 1 1 I init : [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt 01-01 08:00:04.676 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:04.693 1 1 I init : [libfs_mgr]Invalid ext4 superblock on '/dev/block/by-name/metadata' 01-01 08:00:04.694 1 1 E EXT4-fs (mmcblk0p19): VFS: Can't find ext4 filesystem 01-01 08:00:04.702 1 1 I init : [libfs_mgr]__mount(source=/dev/block/by-name/metadata,target=/metadata,type=ext4)=-1: Invalid argument 01-01 08:00:04.703 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Created logical partition system_a on device /dev/block/dm-0 01-01 08:00:04.704 1 1 I init : [libfs_mgr]Skipping zero-length logical partition: system_b 01-01 08:00:04.704 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.705 1 1 I random : init: uninitialized urandom read (16 bytes read) 01-01 08:00:04.711 1 1 I EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.718 1 1 I EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.721 1 1 I EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.724 1 1 I EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1 01-01 08:00:04.730 1 1 I newfs_msdos: executing /system/bin/newfs_msdos failed: No such file or directory 01-01 08:00:04.731 1 1 I newfs_msdos: newfs_msdos terminated by exit(255) 01-01 08:00:04.732 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:04.739 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:04.770 1 1 W printk : init: 21 output lines suppressed due to ratelimiting 01-01 08:00:04.936 1 1 W init : DM_DEV_STATUS failed for system_ext_a: No such device or address 01-01 08:00:04.936 1 1 E init : Could not update logical partition 01-01 08:00:04.942 1 1 I init : Opening SELinux policy 01-01 08:00:04.952 1 1 I init : Loading SELinux policy 01-01 08:00:04.973 1 1 I SELinux : Permission nlmsg_getneigh in class netlink_route_socket not defined in policy. 01-01 08:00:04.973 1 1 I SELinux : the above unknown classes and permissions will be denied 01-01 08:00:04.973 1 1 I SELinux : policy capability network_peer_controls=1 01-01 08:00:04.973 1 1 I SELinux : policy capability open_perms=1 01-01 08:00:04.973 1 1 I SELinux : policy capability extended_socket_class=1 01-01 08:00:04.973 1 1 I SELinux : policy capability always_check_network=0 01-01 08:00:04.973 1 1 I SELinux : policy capability cgroup_seclabel=0 01-01 08:00:04.973 1 1 I SELinux : policy capability nnp_nosuid_transition=1 01-01 08:00:04.996 173 173 W auditd : type=1403 audit(0.0:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 01-01 08:00:05.008 1 1 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.008 1 1 I selinux : 01-01 08:00:05.085 1 1 I init : init second stage started! 01-01 08:00:05.086 1 1 E FAT-fs (mmcblk0p23): bogus number of reserved sectors 01-01 08:00:05.094 1 1 I FAT-fs (mmcblk0p23): Can't find a valid FAT filesystem 01-01 08:00:05.094 1 1 E init : mount media_data fail*****Invalid argument 01-01 08:00:05.160 1 1 I init : Using Android DT directory /proc/device-tree/firmware/android/ 01-01 08:00:05.167 1 1 W init : Overriding previous property 'persist.sys.usb.config':'none' with new value 'adb' 01-01 08:00:05.168 1 1 W init : Overriding previous property 'persist.sys.usb.config':'adb' with new value 'none' 01-01 08:00:05.168 1 1 W init : Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.174 1 1 W init : Couldn't load property file '/odm_dlkm/etc/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.176 1 1 W init : Couldn't load property file '/oem/build.prop': open() failed: No such file or directory: No such file or directory 01-01 08:00:05.177 1 1 E init : Could not set 'ro.boot.dynamic_partitions' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.191 1 1 E init : Could not set 'ro.boot.dynamic_partitions_retrofit' to 'true' while loading .prop filesRead-only property was already set 01-01 08:00:05.328 1 1 E cgroup1 : Unknown subsys name 'blkio' 01-01 08:00:05.337 1 1 E cgroup1 : Unknown subsys name 'memory' 01-01 08:00:06.010 175 175 W SELinux : Multiple same specifications for softwinner\.multiir. 01-01 08:00:05.548 161 161 I ueventd : ueventd started! 01-01 08:00:06.011 177 177 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.011 177 177 I SELinux : /vendor/etc/selinux/vndservice_contexts 01-01 08:00:05.553 161 161 I selinux : SELinux: Loaded file_contexts 01-01 08:00:05.553 161 161 I selinux : 01-01 08:00:05.553 161 161 I ueventd : Parsing file /system/etc/ueventd.rc... 01-01 08:00:05.553 161 161 I ueventd : Added '/vendor/etc/ueventd.rc' to import list 01-01 08:00:05.553 161 161 I ueventd : Added '/odm/etc/ueventd.rc' to import list 01-01 08:00:05.554 161 161 I ueventd : Parsing file /vendor/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/vendor/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.554 161 161 I ueventd : Parsing file /odm/etc/ueventd.rc... 01-01 08:00:05.554 161 161 I ueventd : Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory 01-01 08:00:05.797 158 158 I sunxi-rfkill soc@3000000: rfkill: module version: v1.0.9 01-01 08:00:05.797 158 158 W sunxi-rfkill soc@3000000: rfkill: pinctrl_lookup_state(default) failed! return ffffffffffffffed 01-01 08:00:05.797 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio chip_en failed 01-01 08:00:05.805 158 158 E sunxi-rfkill soc@3000000: rfkill: get gpio power_en failed 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_busnum (1) 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing wlan_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_regon gpio=210 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wlan_hostwake gpio=207 assert=0 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: wakeup source is enabled 01-01 08:00:05.813 158 158 W sunxi-rfkill soc@3000000: rfkill: Missing bt_power. 01-01 08:00:05.813 158 158 I sunxi-rfkill soc@3000000: rfkill: bt_rst gpio=211 assert=0 01-01 08:00:05.892 124 124 I : hdmi_hpd_sys_config_release 01-01 08:00:05.933 1 1 I : Registered swp emulation handler 01-01 08:00:05.977 173 173 I logd.auditd: start 01-01 08:00:06.013 175 175 I SELinux : SELinux: Loaded service_contexts from: 01-01 08:00:06.013 175 175 I SELinux : /system/etc/selinux/plat_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /system_ext/etc/selinux/system_ext_service_contexts 01-01 08:00:06.013 175 175 I SELinux : /vendor/etc/selinux/vendor_service_contexts 01-01 08:00:06.017 176 176 I hwservicemanager: getFrameworkHalManifest: Reading VINTF information. 01-01 08:00:06.028 176 176 I hwservicemanager: getDeviceHalManifest: Reading VINTF information. 01-01 08:00:06.032 185 185 I format_device: Start format /dev/block/by-name/Reserve0 01-01 08:00:06.033 189 189 I format_device: fork to format /dev/block/by-name/Reserve0 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: F2FS-tools: mkfs.f2fs Ver: 1.14.0 (2020-08-24) 01-01 08:00:06.046 1 1 I make_f2fs: 01-01 08:00:06.046 1 1 I make_f2fs: Info: Disable heap-based policy 01-01 08:00:06.046 1 1 I make_f2fs: Info: Debug level = 1 01-01 08:00:06.046 1 1 I make_f2fs: Info: Trim is enabled 01-01 08:00:06.046 1 1 I make_f2fs: Info: Set conf for android 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable utf8 with casefolding 01-01 08:00:06.046 1 1 I make_f2fs: Info: Enable Project quota 01-01 08:00:06.048 1 1 I make_f2fs: Info: No support kernel version! 01-01 08:00:06.049 176 176 I hwservicemanager: getDeviceHalManifest: Successfully processed VINTF information 01-01 08:00:06.049 176 176 I hwservicemanager: getFrameworkHalManifest: Successfully processed VINTF information 01-01 08:00:06.051 176 176 I hwservicemanager: hwservicemanager is ready now. 01-01 08:00:06.056 185 185 I format_device: format /dev/block/by-name/Reserve0 ok dts配置如下: &sdc1 { pinctrl-0 = <&sdc1_pins_a>; bus-width = <4>; no-mmc; no-sd; cap-sd-highspeed; /*sd-uhs-sdr12; sd-uhs-sdr25;*/ sd-uhs-sdr50; sd-uhs-ddr50; sd-uhs-sdr104; /*sunxi-power-save-mode;*/ sunxi-dis-signal-vol-sw; mmc-ddr-1_8v; cap-sdio-irq; keep-power-in-suspend; ignore-pm-notify; ctl-spec-caps = <0x8>; max-frequency = <50000000>; /*vmmc-supply = <®_dldo1>; vqmmc-supply = <®_aldo1>;*/ status = "okay"; };
-
wifi跑不起来
那位大神帮忙看看,h618的sdio的频率一直是400k,要怎么改才能设置为150m,在dts里面设置max-frequency为150没用,wifi不能起来