全志在线开发者论坛

cvwithd1

@cvwithd1 问题已解决：https://github.com/opencv/opencv/wiki/OpenCV-RISC-V

cvwithd1

@whycan 我在没有刷系统的前提下，把sleep和wifi_connect_ap_test加入到/etc/init.d/S99swupdate_autorun就可以了。

cvwithd1

@whycan 请问是加入到哪个文件？还是在/etc/init.d里面自己写一个文件？

cvwithd1

大家好。我用wifi_connect_ap_test可以成功连接无线网，但是我尝试开机自动连接WIFI失败。我尝试过把wifi_connect_ap_test <SSID> <PWD>加入到/etc/rc.local和/etc/init.d/S99swupdate_autorun，以及crontab @reboot wifi_connect_ap_test <SSID> <PWD>都不行。我估计是因为wlan0在开机最后一步初始化导致的，但是我也找不到wlan0初始化的地方。请问一下大家如何让D1用出厂系统TinaLinux时设置开机自动连接WIFI？

cvwithd1

@cvwithd1 问题已解决：https://github.com/opencv/opencv/wiki/OpenCV-RISC-V

cvwithd1

我在使用全志D1 SDK交叉编译OpenCV时遇到下面提示：

Performing Test HAVE_CPU_RVV_SUPPORT (check file: cmake/checks/cpu_rvv.cpp)
Performing Test HAVE_CPU_RVV_SUPPORT - Failed
RVV is not supported by C++ compiler
Optimization RVV is not available, skipped
Dispatch optimization RVV is not available, skipped

根据这个提示，应该是全志D1 SDK附带的g++不支持RVV。请问有办法解决这个问题吗？

我交叉编译OpenCV时参考的是这个帖子：https://bbs.aw-ol.com/topic/227/在ubuntu中交叉编译opencv-4-5-1-运行于tina-linux中-整合帖/18

cvwithd1

@zhilong-wb 不用安装。直接usb连接，我这边可以用以下命令寻找和连接

$ ll /dev/tty.usb*
/dev/tty.usbserial-A50285BI # 可能名字会不同
$ screen /dev/tty.usbserial-A50285BI 115200 # 用screen命令连接串口

cvwithd1

@whycan FEL模式应该是可以进的，因为之前我就是通过这个方式尝试在mac下用phoenixsuit刷默认固件。

cvwithd1

@whycan 特意搞了一台windows设备，但是故障板子插上去phoenixSuit检测不到。为了排除是windows上的问题，我把一块全新的D1插上去，倒是能够识别。看来是故障板子挂了。

cvwithd1

@whycan 串口错误提示信息（见最后几行）如下：

phoenixsuit_mac_v1.0.0 sudo ./phoenixsuit ../D1哪吒HDMI测试固件20210804（ 开机HDMI就有小企鹅启动logo）.img
*************Allwinnertech************
AW MacOS Burn firmware software V1.0.0
*************Allwinnertech************
-----LoadPluginCenter-------
library file path: /Users/fengyuantao/Downloads/phoenixsuit_mac_v1.0.0/plgvector.dll
library file path: /Users/fengyuantao/Downloads/phoenixsuit_mac_v1.0.0/LiveProc.Plg
-----SetLiveProc-------
library file path: /Users/fengyuantao/Downloads/phoenixsuit_mac_v1.0.0/plgvector.dll
library file path: /Users/fengyuantao/Downloads/phoenixsuit_mac_v1.0.0/luaeFex.dll
-----OnImage-------
DeviceThreadEntryForMac called
Register./luaBase.dll l_RegAllFun Sucess!
Register./luaeFex.dll l_RegAllFun Sucess!
Register./luadec.dll l_RegAllFun Sucess!
copy luatool from local
----enter sem_wait-------
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
Begin Burn the image!
progress 0%Register./luaBase.dll l_RegAllFun Sucess!
Register./luaeFex.dll l_RegAllFun Sucess!
Register./luadec.dll l_RegAllFun Sucess!
copy luatool from local
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
--------------Init Called------------------
workDir	/Users/fengyuantao/Downloads/phoenixsuit_mac_v1.0.0
ImgLenHigh	0
ImgLenLow	29854720
Mode	8
hWnd	0
imgFilePath	../D1哪吒HDMI测试固件20210804（开机HDMI就有小企鹅启动logo）.img
[TL_MSG]:Mode = 8, ImgLenHigh=0, ImgLenLow = 1c78c00, imgFilePath = ../D1哪吒HDMI测试固件20210804（开机HDMI就有小企鹅启动logo）.img

IMAGEWTY
ItemTableSize = 1048576
[TL_MSG]:Tools Open Img

---fun end---
--------------entry-fel2fes Called-----------
felDevName	01130000
[TL_MSG]:Hi, I'm fel, dev=01130000

./AllWinnerDevice.cpp Fex_Open 604
FEL RecordDev: 01130000
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
[TL_MSG]:To down and Run fes1-1

[TL_MSG]:fes1 down addr = 0x28000, retAddr =0x28340

[TL_MSG]:To clear fes aide log

[TL_FEX]:fel UP addr=0x28340, len=136

[TL_MSG]:SYS_PARA_LOG read = 0x4d415244

[TL_MSG]:dram paras[0]: 0x318

[TL_MSG]:dram paras[1]: 0x3

[TL_MSG]:dram paras[2]: 0x7b7bfb

[TL_MSG]:dram paras[3]: 0x1

[TL_MSG]:dram paras[4]: 0x10f210f2

[TL_MSG]:dram paras[5]: 0x4001000

[TL_MSG]:dram paras[6]: 0x1c70

[TL_MSG]:dram paras[7]: 0x42

[TL_MSG]:dram paras[8]: 0x18

[TL_MSG]:dram paras[9]: 0x0

[TL_MSG]:dram paras[10]: 0x4a2195

[TL_MSG]:dram paras[11]: 0x2423190

[TL_MSG]:dram paras[12]: 0x8b061

[TL_MSG]:dram paras[13]: 0xb4787896

[TL_MSG]:dram paras[14]: 0x0

[TL_MSG]:dram paras[15]: 0x48484848

[TL_MSG]:dram paras[16]: 0x48

[TL_MSG]:dram paras[17]: 0x1620121e

[TL_MSG]:dram paras[18]: 0x0

[TL_MSG]:dram paras[19]: 0x0

[TL_MSG]:dram paras[20]: 0x0

[TL_MSG]:dram paras[21]: 0x870000

[TL_MSG]:dram paras[22]: 0x24

[TL_MSG]:dram paras[23]: 0x34056103

[TL_MSG]:dram paras[24]: 0x0

[TL_MSG]:dram paras[25]: 0x0

[TL_MSG]:dram paras[26]: 0x0

[TL_MSG]:dram paras[27]: 0x0

[TL_MSG]:dram paras[28]: 0x0

[TL_MSG]:dram paras[29]: 0x0

[TL_MSG]:dram paras[30]: 0x0

[TL_MSG]:dram paras[31]: 0x0

[TL_MSG]:To down and Run uboot

[TL_MSG]:u-boot down addr = 0x42000000

[TL_MSG]:workmode = 0x10

[TL_MSG]:dtb down addr = 0x42200000

[TL_MSG]:sysconfig down addr = 0x42300000

---fun end---
Fel Thread Finished!
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
FES find FEL RecordDev: 01130000
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
--------------entry fes_thread Called---------
portId	0
fesDevName	01130000
hubId	0
DeviceId	1
[TL_MSG]:enter FES--01130000

./AllWinnerDevice.cpp Fex_Open 604
Found allwinner usb device (vendor 7994, product 61416), location id 01130000
Found 1 devices
[TL_MSG]:set erase flag 0

[TL_MSG]:Verify: media crc = 0

progress 3%[TL_MSG]:save item to mem :(12345678,1234567890___MBR) realLen(65536)

./buffer.cpp, pBuffer = 0x7fa160008004, nLen = 16380, crc32 = 1283179231[TL_MSG]:name = boot-resource, keydata = 0

[TL_MSG]:name = env, keydata = 0

[TL_MSG]:name = env-redund, keydata = 0

[TL_MSG]:name = boot, keydata = 0

[TL_MSG]:name = rootfs, keydata = 0

[TL_MSG]:name = dsp0, keydata = 0

[TL_MSG]:name = recovery, keydata = 0

[TL_MSG]:name = UDISK, keydata = 0

[TL_MSG]:name = , keydata = 0

Fex_transmit_receive ./AllWinnerDevice.cpp, 782 status stage status Error 		   CSWStatus=fd(0) Magic=53555741(53555741)
Fex_transmit_receive ./AllWinnerDevice.cpp, 782 status stage status Error 		   CSWStatus=fd(0) Magic=53555741(53555741)
Fex_transmit_receive ./AllWinnerDevice.cpp, 782 status stage status Error 		   CSWStatus=fd(0) Magic=53555741(53555741)
<TL_FEX>Err./usbtool.lua_1536>:Fail to send fex cmd verify status

<TL_ERR>:./usbtool.lua_3030>:verify status error

<TL_ERR>:./usbtool.lua_3326>:Verify status error

progress 4%<TL_ERR>:./usbtool.lua_3994>:down mbr error

L296, Exception, returned value of Tools.entry_fes_thread is error.

Error!!!: returned value of Tools.entry_fes_thread is error
./DeviceMessage/ASuitDeviceMessage.cpp 128 failed
----exit-------

cvwithd1

@allwinnertech 我看这里用的ubuntu是ubuntu-base，不是满血的python。ubuntu现在有释出一个给另一个厂商做的risc v镜像，不知道那个能不能直接跑在d1上。

cvwithd1LV 4

@cvwithd1

cvwithd1 发布的最佳帖子

cvwithd1 发布的最新帖子