@wj8331585 有交流群吗？我也正在学习Funkey

屏为ST7789的8080 8位并口屏。分辨率为：240*320。不带TE。参考驱动配置https://docs.aw-ol.com/docs/soc/v821/disp/disp2/disp_driver_lcd_i8080/

&disp {
	disp_init_enable         = <1>;
	disp_mode                = <0>;

	screen0_output_type      = <1>;
	screen0_output_mode      = <4>;
	screen0_to_lcd_index     = <0>;

	screen1_output_type      = <3>;
	screen1_output_mode      = <10>;
	screen1_to_lcd_index     = <2>;

	screen1_output_format    = <0>;
	screen1_output_bits      = <0>;
	screen1_output_eotf      = <4>;
	screen1_output_cs        = <257>;
	screen1_output_dvi_hdmi  = <2>;
	screen1_output_range     = <2>;
	screen1_output_scan      = <0>;
	screen1_output_aspect_ratio = <8>;

	fb_format                = <0>;
	fb_num                   = <1>;
	fb_debug                 = <0>;
	/*<disp channel layer zorder>*/
	fb0_map                  = <0 0 0 16>;
	fb0_width                = <240>;
	fb0_height               = <320>;
	/*<disp channel layer zorder>*/
	fb1_map                  = <0 2 0 16>;
	fb1_width                = <300>;
	fb1_height               = <300>;
	/*<disp channel layer zorder>*/
	fb2_map                  = <1 0 0 16>;
	fb2_width                = <1280>;
	fb2_height               = <720>;
	/*<disp channel layer zorder>*/
	fb3_map                  = <1 1 0 16>;
	fb3_width                = <300>;
	fb3_height               = <300>;

	chn_cfg_mode             = <1>;
	disp_para_zone           = <1>;
};

&lcd0 {
	lcd_used            = <1>;

	lcd_driver_name     = "st7789v_cpu";
	lcd_if              = <1>;

	lcd_x               = <240>;
	lcd_y               = <320>;
	lcd_width           = <43>;
	lcd_height          = <63>;

	lcd_dclk_freq       = <20>;

	lcd_hbp             = <20>;
	lcd_ht              = <298>;
	lcd_hspw            = <10>;
	lcd_vbp             = <8>;
	lcd_vt              = <336>;
	lcd_vspw            = <2>;

	lcd_backlight       = <50>;
	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <4>;
	lcd_pwm_freq        = <50000>;
	lcd_pwm_pol         = <1>;
	lcd_pwm_max_limit   = <255>;
	lcd_bright_curve_en = <1>;

	lcd_frm             = <2>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;

	lcdgamma4iep        = <22>;
	lcd_cpu_mode        = <1>;
	lcd_cpu_te          = <2>;
	lcd_cpu_if          = <14>;

	/* rst */
	lcd_gpio_0          = <&pio PD 19 GPIO_ACTIVE_LOW>;
	/* cs */
	lcd_gpio_1          = <&pio PD 14 GPIO_ACTIVE_LOW>;

	pinctrl-0 = <&rgb8_pins_a>, <&rgb8_pins_ctl_a>;
	pinctrl-1 = <&rgb8_pins_b>, <&rgb8_pins_ctl_b>;
};

不知道应当如何调试解决这个问题。

@wj8331585 有交流群吗？我也正在学习Funkey

@famel 我跟你的问题一样，估计是补丁没更新。但是D1-H的代码已经更新了

刚接触这块，由于是个人拿不到Tina的最新源代码。手上的代码是开发板提供商给的。编译就报这个错：
ERROR: please fix package/allwinner/eyesee-mpp/dragonboard/Makefile - see logs/package/allwinner/eyesee-mpp/dragonboard/dump.txt for details
ERROR: please fix package/allwinner/eyesee-mpp/middleware/Makefile - see logs/package/allwinner/eyesee-mpp/middleware/dump.txt for details
。不知道如何解决。
不知道哪位大神手上有较新的Tina代码。

我需要T113的SDK，应当上哪里去下载？

为了升LV2，正在回贴