@copper 我我现在还没搞懂是T113的问题还是软件的问题,你说T113的问题吧,在windows上可与烧录,你说软件的问题吧,群用用我这个包安装之后也可以烧录……我自己也换了几个版本的系统了,都是同样的问题
D
damifan110LV 5
@damifan110
Latest posts made by damifan110
-
Reply: ubuntu20.04使用LiveSuit下载失败闪退问题
-
Reply: ubuntu20.04使用LiveSuit下载失败闪退问题
@whycan 最开始用的18.04,当时是可以用的,后来某些原因做了系统,然后又做回18.04就不行了,然后我安装了20.04也不行了。
在这次不行之前在windows上也出现过下载失败,无论如何也下载不上,后来用量产工具下载成功以后才又可以下载
就是这个工具了
当时报的错误好像是分配内存错误 好像是给private分配SRAM错误
-
Reply: ubuntu20.04使用LiveSuit下载失败闪退问题
@whycan 真的是很头疼啊,曾经好用过,重新做了系统,无论如何都不行了,不知道是抽了什么风啊……
-
Reply: ubuntu20.04使用LiveSuit下载失败闪退问题
@whycan 在 ubuntu20.04使用LiveSuit下载失败闪退问题 中说:
能看出来我这个是烧录工具问题还是 T113的问题吗?
-
ubuntu20.04使用LiveSuit下载失败闪退问题
ubuntu20.04(ubuntu18.04也进行了测试)LiveSuitV3.06版本进行T113的烧录时,闪退。详情如下
使用SOC 为T113
使用存储为 EMMC
windows烧录正常,可以使用
上图选择格式化
上图开始下载,下载至96%时出现问题,闪退。LiveSuit log如下
IMAGEWTY ItemTableSize = 1048576 [TL_MSG]:Tools Open Img ---fun end--- --------------entry-fel2fes Called----------- felDevName /dev/aw_efex4 [TL_MSG]:Hi, I'm fel, dev=/dev/aw_efex4 [TL_MSG]:To down and Run fes1-1 [TL_MSG]:fes1 down addr = 0x28000, retAddr =0x28340 [TL_MSG]:tlFelDev.FelRun finish [TL_MSG]:hasRetLog finish [TL_MSG]:Tools_Buffer finish [TL_FEX]:fel UP addr=0x28340, len=136 [TL_MSG]:SYS_PARA_LOG read = 0x4d415244 [TL_MSG]:dram paras[0]: 0x39c [TL_MSG]:dram paras[1]: 0x3 [TL_MSG]:dram paras[2]: 0x7b7bfb [TL_MSG]:dram paras[3]: 0x0 [TL_MSG]:dram paras[4]: 0x10d2 [TL_MSG]:dram paras[5]: 0x800000 [TL_MSG]:dram paras[6]: 0x1e14 [TL_MSG]:dram paras[7]: 0x42 [TL_MSG]:dram paras[8]: 0x20 [TL_MSG]:dram paras[9]: 0x0 [TL_MSG]:dram paras[10]: 0x4899d7 [TL_MSG]:dram paras[11]: 0x1c239d0 [TL_MSG]:dram paras[12]: 0xa2071 [TL_MSG]:dram paras[13]: 0xb4787896 [TL_MSG]:dram paras[14]: 0x0 [TL_MSG]:dram paras[15]: 0x48484848 [TL_MSG]:dram paras[16]: 0x48 [TL_MSG]:dram paras[17]: 0x1620121e [TL_MSG]:dram paras[18]: 0x0 [TL_MSG]:dram paras[19]: 0x0 [TL_MSG]:dram paras[20]: 0x0 [TL_MSG]:dram paras[21]: 0x340000 [TL_MSG]:dram paras[22]: 0x46 [TL_MSG]:dram paras[23]: 0x34006103 [TL_MSG]:dram paras[24]: 0x0 [TL_MSG]:dram paras[25]: 0x0 [TL_MSG]:dram paras[26]: 0x0 [TL_MSG]:dram paras[27]: 0x0 [TL_MSG]:dram paras[28]: 0x0 [TL_MSG]:dram paras[29]: 0x0 [TL_MSG]:dram paras[30]: 0x0 [TL_MSG]:dram paras[31]: 0x0 [TL_MSG]:for tlFelDev.FelUpData finish [TL_MSG]:To down and Run uboot [TL_MSG]:u-boot down addr = 0x43000000 [TL_MSG]:workmode = 0x10 [TL_MSG]:dtb down addr = 0x43200000 [TL_MSG]:sysconfig down addr = 0x43300000 ---fun end--- Fel Thread Finished! Dev Plugout The Device Path is: /dev/aw_efex4 Dev Plugout The Device Path is: /dev/aw_efex4 Dev Plugin The Device Path is: /dev/aw_efex4 --------------entry fes_thread Called--------- portId 0 fesDevName /dev/aw_efex4 hubId 0 DeviceId 1 [TL_MSG]:enter FES--/dev/aw_efex4 [TL_MSG]:Verify: media crc = 0 [TL_MSG]:save item to mem :(12345678,1234567890___MBR) realLen(65536) ./buffer.cpp, pBuffer = 0x7fd6c4012084, nLen = 16380, crc32 = 4134314412[TL_MSG]:name = boot-resource, keydata = 0 [TL_MSG]:name = env, keydata = 0 [TL_MSG]:name = env-redund, keydata = 0 [TL_MSG]:name = boot, keydata = 0 [TL_MSG]:name = rootfs, keydata = 0 [TL_MSG]:name = private, keydata = 0 [TL_MSG]:name = rootfs_data, keydata = 0 [TL_MSG]:name = UDISK, keydata = 0 [TL_MSG]:name = , keydata = 0 [TL_MSG]:Verify: media crc = 0 [TL_MSG]:down mbr success!!! [TL_MSG]:storge type is 2 (0:nand 1-2:card 3:spinor) [TL_MSG]:dl file :save item to mem :(12345678,1234567890DLINFO) realLen(16384) ./buffer.cpp, pBuffer = 0x7fd6c461a974, nLen = 16380, crc32 = 2550867671[TL_MSG]:------------dlmap dump-------------- [TL_MSG]:crc32 = 0x980b26d7 [TL_MSG]:version = 0x200 [TL_MSG]:magic = softw411 [TL_MSG]:part_cnt = 5 [TL_MSG]:flash size is : 15269888 Sectors [TL_MSG]:name = boot-resource addrhi=0x0 addrlo = 0x8000 lenhi = 0x0 lenlo = 0x34e file = BOOT-RESOURCE_FE, en=0,vf=1 [TL_MSG]:sparseFlag:false [TL_MSG]:need verify:1,VBOOT-RESOURCE_F [TL_FEX]:8000, 14000 [TL_MSG]:Verify:start = 8000 ,size = 14000 ,pc_crc = e6f75b5c, media crc = e6f75b5c [TL_MSG]:name = env addrhi=0x0 addrlo = 0x834e lenhi = 0x0 lenlo = 0x1f8 file = ENV_FEX000000000, en=0,vf=1 [TL_MSG]:sparseFlag:false [TL_MSG]:need verify:1,VENV_FEX00000000 [TL_FEX]:834e, 20000 [TL_MSG]:Verify:start = 834e ,size = 20000 ,pc_crc = adc89266, media crc = adc89266 [TL_MSG]:name = env-redund addrhi=0x0 addrlo = 0x8546 lenhi = 0x0 lenlo = 0x1f8 file = ENV_FEX000000000, en=0,vf=1 [TL_MSG]:sparseFlag:false [TL_MSG]:need verify:1,VENV_FEX00000000 [TL_FEX]:8546, 20000 [TL_MSG]:Verify:start = 8546 ,size = 20000 ,pc_crc = adc89266, media crc = adc89266 [TL_MSG]:name = boot addrhi=0x0 addrlo = 0x873e lenhi = 0x0 lenlo = 0x2000 file = BOOT_FEX00000000, en=0,vf=1 [TL_MSG]:sparseFlag:false [TL_MSG]:need verify:1,VBOOT_FEX0000000 [TL_FEX]:873e, 3c2800 [TL_MSG]:Verify:start = 873e ,size = 3c2800 ,pc_crc = 3ebdcad9, media crc = 3ebdcad9 [TL_MSG]:name = rootfs addrhi=0x0 addrlo = 0xa73e lenhi = 0x0 lenlo = 0xf000 file = ROOTFS_FEX000000, en=0,vf=1 [TL_MSG]:sparseFlag:false [TL_MSG]:need verify:1,VROOTFS_FEX00000 free(): invalid pointer ./LiveSuit.sh:行 19: 9255 已放弃 (核心已转储) LD_LIBRARY_PATH=${TOP_DIR}/${BIN_DIR}/ ${BIN_DIR}/${APP}
至此时,T113的EMMC已经被格式化,但系统烧录失败
以下为T113烧录时串口输出的log
[4445]fes begin commit:88480af-dirty [4449]set pll start [4455]periph0 has been enabled [4458]set pll end [4459][pmu]: bus read error [4462]board init ok [4464]beign to init dram [4466]ZQ value = 0x2f [4468]get_pmu_exist() = -1 [4471]ddr_efuse_type: 0xa [4473]trefi:7.8ms [4476][AUTO DEBUG] single rank and full DQ! [4480]ddr_efuse_type: 0xa [4482]trefi:7.8ms [4485][AUTO DEBUG] rank 0 row = 13 [4488][AUTO DEBUG] rank 0 bank = 8 [4492][AUTO DEBUG] rank 0 page size = 2 KB [4496]DRAM BOOT DRIVE INFO: V0.33 [4499]DRAM CLK = 924 MHz [4501]DRAM Type = 3 (2:DDR2,3:DDR3) [4504]DRAMC read ODT off. [4507]DRAM ODT value: 0x42. [4510]ddr_efuse_type: 0xa [4513]DRAM SIZE =128 M [4515]dram_tpr4:0x0 [4517]PLL_DDR_CTRL_REG:0xf8004c00 [4520]DRAM_CLK_REG:0xc0000000 [4523][TIMING DEBUG] MR2= 0x20 [4527]DRAM simple test OK. [4529]rtc standby flag is 0x0, super standby flag is 0x0 [4535]init dram ok U-Boot 2018.07-ge987def5-dirty (May 25 2023 - 18:38:27 +0800) Allwinner Technoly [06.874]CPU: Allwinner Family [06.877]Model: sun8iw20 I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH ready [06.898]DRAM: 128 MiB [06.901]Relocation Offset is: 04eba000 [06.927]secure enable bit: 0 [06.930]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz [06.936]gic: normal mode sunxi flash map init [06.941]flash init start [06.943]workmode = 16,storage type = 0 try card 2 set card number 2 get card number 2 [06.951][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [06.957][mmc]: Is not Boot mode! [06.960][mmc]: SUNXI SDMMC Controller Version:0x50310 [06.971][mmc]: ************Try SD card 2************ [06.977][mmc]: mmc 2 cmd timeout 100 status 100 [06.981][mmc]: smc 2 err, cmd 8, RTO [06.984][mmc]: mmc 2 close bus gating and reset [06.989][mmc]: mmc 2 cmd timeout 100 status 100 [06.993][mmc]: smc 2 err, cmd 55, RTO [06.997][mmc]: mmc 2 close bus gating and reset [07.001][mmc]: ************Try MMC card 2************ [07.025][mmc]: mmc 2 cmd timeout 100 status 100 [07.029][mmc]: smc 2 err, cmd 8, RTO [07.032][mmc]: mmc 2 close bus gating and reset [07.037][mmc]: mmc 2 cmd timeout 100 status 100 [07.042][mmc]: smc 2 err, cmd 55, RTO [07.045][mmc]: mmc 2 close bus gating and reset [07.061][mmc]: gen_tuning_blk_bus8: total blk 10 [07.066][mmc]: gen_tuning_blk_bus4: total blk 6 [07.070][mmc]: Using 4 bit tuning now [07.074][mmc]: write_tuning_try_freq: write ok [07.078][mmc]: Pattern compare ok [07.081][mmc]: Write tuning pattern ok [07.085][mmc]: ================== HSSDR52_SDR25... [07.089][mmc]: skip freq 400000 [07.092][mmc]: skip freq 25000000 [07.095][mmc]: freq: 2-50000000-64-4 [07.377][mmc]: [0-63|64] [07.379][mmc]: ================== HSDDR52_DDR50... [07.383][mmc]: skip freq 400000 [07.386][mmc]: freq: 1-25000000-64-4 [07.616][mmc]: freq: 2-50000000-64-4 [07.781][mmc]: [0-50|51] [07.783][mmc]: [0-45|46] [07.786][mmc]: DS26/SDR12: 0xffffffff 0xffffffff [07.790][mmc]: HSSDR52/SDR25: 0xff20ffff 0xffffffff [07.794][mmc]: HSDDR52/DDR50: 0xff1719ff 0xffffffff [07.799][mmc]: HS200/SDR104: 0xffffffff 0xffffffff [07.803][mmc]: HS400: 0xffffffff 0xffffffff [07.807][mmc]: HS400: 0xffffffff 0xffffffff [07.811][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 4 [07.818]line:703 init_clocks [07.821]init_clocks:finish [07.823]Loading Environment from SUNXI_FLASH... OK [07.828]try to burn key [07.830]out of usb burn from boot: not need burn key Hit any key to stop autoboot: 0 sunxi work mode=0x10 run usb efex buf queue page size = 65536 delay time 2500 weak:otg_phy_config usb init ok set address 0xd set address 0xd ok SUNXI_EFEX_ERASE_TAG erase_flag = 0x1 origin_erase_flag = 0x1 FEX_CMD_fes_verify_status FEX_CMD_fes_verify last err=0 the 0 mbr table is ok the 1 mbr table is ok the 2 mbr table is ok the 3 mbr table is ok *************MBR DUMP*************** total mbr part 8 part[0] name :boot-resource part[0] classname :DISK part[0] addrlo :0x8000 part[0] lenlo :0x34e part[0] user_type :32768 part[0] keydata :0 part[0] ro :0 part[1] name :env part[1] classname :DISK part[1] addrlo :0x834e part[1] lenlo :0x1f8 part[1] user_type :32768 part[1] keydata :0 part[1] ro :0 part[2] name :env-redund part[2] classname :DISK part[2] addrlo :0x8546 part[2] lenlo :0x1f8 part[2] user_type :32768 part[2] keydata :0 part[2] ro :0 part[3] name :boot part[3] classname :DISK part[3] addrlo :0x873e part[3] lenlo :0x2000 part[3] user_type :32768 part[3] keydata :0 part[3] ro :0 part[4] name :rootfs part[4] classname :DISK part[4] addrlo :0xa73e part[4] lenlo :0xf000 part[4] user_type :32768 part[4] keydata :0 part[4] ro :0 part[5] name :private part[5] classname :DISK part[5] addrlo :0x1973e part[5] lenlo :0x2800 part[5] user_type :32768 part[5] keydata :0 part[5] ro :0 part[6] name :rootfs_data part[6] classname :DISK part[6] addrlo :0x1bf3e part[6] lenlo :0x200000 part[6] user_type :32768 part[6] keydata :0 part[6] ro :0 part[7] name :UDISK part[7] classname :DISK part[7] addrlo :0x21bf3e part[7] lenlo :0x0 part[7] user_type :32768 part[7] keydata :0 part[7] ro :0 total part: 9 mbr 0, 8000, 8000 boot-resource 1, 34e, 8000 env 2, 1f8, 8000 env-redund 3, 1f8, 8000 boot 4, 2000, 8000 rootfs 5, f000, 8000 private 6, 2800, 8000 rootfs_data 7, 200000, 8000 UDISK 8, 0, 8000 [11.296]erase all part start need erase flash: 1 [11.301]read item0 copy0 [11.314]Item0 (Map) magic is bad [11.317]the secure storage item0 copy0 magic is bad [11.333]Item0 (Map) magic is bad [11.336]the secure storage item0 copy1 magic is bad [11.340]Item0 (Map) magic is bad [11.343]the secure storage map is empty [11.347]no item name set-active-boot-slot in the map erase secure storage failed [11.354]sunxi_secure_storage_exit err: secure storage has not been inited private part exist GPT:boot-resource: 12000 1234d GPT:env : 1234e 12545 GPT:env-redund : 12546 1273d GPT:boot : 1273e 1473d GPT:rootfs : 1473e 2373d GPT:private : 2373e 25f3d GPT:rootfs_data : 25f3e 225f3d GPT:UDISK : 225f3e e8ffde begin to store data part 0 name boot-resource keydata = 0x0 part 1 name env keydata = 0x0 part 2 name env-redund keydata = 0x0 part 3 name boot keydata = 0x0 part 4 name rootfs keydata = 0x0 part 5 name private keydata = 0x0 find keypart private keypart read start: 0x1973e, sectors 0x2800 keypart part private read 0x1973e, sectors 0x2800 part 6 name rootfs_data keydata = 0x0 part 7 name UDISK keydata = 0x0 begin to erase [11.557]erase all part start card2 erase boot0 erase env part [11.567][mmc]: after adjust nr, no more space need to erase!! [11.573][mmc]: after align erase group, no space need to erase, erase failed [11.580][mmc]: mmc_mmc_erase: erase emmc fail! [11.584][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.589][mmc]: --0: from74574 nr504 erase env-redund part [11.604][mmc]: after adjust start addr, no more space need to erase!! [11.610][mmc]: Erase addr is not erase group alignment! [11.615][mmc]: erase failed, range 75776 - 76280 [11.619][mmc]: mmc_mmc_erase: erase emmc fail! [11.623][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.629][mmc]: --0: from75078 nr504 erase boot part [11.643][mmc]: erase from: 75776, to: 82943, cnt: 7168, erase_group: 1024 [11.652][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0x3 ms [11.658][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.664][mmc]: --0: from75582 nr194 [11.667][mmc]: --1: from82944 nr830 erase rootfs part [11.689][mmc]: erase from: 83968, to: 144383, cnt: 60416, erase_group: 1024 [11.700][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0x4 ms [11.706][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.712][mmc]: --0: from83774 nr194 [11.715][mmc]: --1: from144384 nr830 erase private part [11.737][mmc]: erase from: 145408, to: 154623, cnt: 9216, erase_group: 1024 [11.746][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0x2 ms [11.753][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.758][mmc]: --0: from145214 nr194 [11.762][mmc]: --1: from154624 nr830 erase rootfs_data part [11.784][mmc]: erase from: 155648, to: 2251775, cnt: 2096128, erase_group: 1024 [11.795][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0x4 ms [11.801][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.807][mmc]: --0: from155454 nr194 [11.810][mmc]: --1: from2251776 nr830 erase UDISK part sunxi_sprite_mmc_phyerase: @nr is 0, erase from @from to end [11.838][mmc]: erase from: 2252800, to: 15268863, cnt: 13016064, erase_group: 14 [11.862][mmc]: sunxi_mmc_do_send_cmd_common: cmd 38 wait rsp busy 0x11 ms [11.868][mmc]: mmc_mmc_erase: some sectors in emmc are ignored! [11.874][mmc]: --0: from2252606 nr194 [11.877][mmc]: --1: from15268864 nr1023 card erase all finish erase rewrite write primary GPT success write Backup GPT success [11.914]update partition map keypart write start: 0x1973e, sectors 0x2800 flash exit SUNXI_EFEX_MBR_TAG mbr size = 0x10000 write primary GPT success write Backup GPT success [12.084]update partition map FEX_CMD_fes_verify_status FEX_CMD_fes_verify last err=0 ******Has init flash sectors: 0xe90000 FEX_CMD_fes_verify_value, start 0x8000, size high 0x0:low 0x14000 FEX_CMD_fes_verify_value 0xe6f75b5c FEX_CMD_fes_verify_value, start 0x834e, size high 0x0:low 0x20000 FEX_CMD_fes_verify_value 0xadc89266 FEX_CMD_fes_verify_value, start 0x8546, size high 0x0:low 0x20000 FEX_CMD_fes_verify_value 0xadc89266 FEX_CMD_fes_verify_value, start 0x873e, size high 0x0:low 0x3c2800 FEX_CMD_fes_verify_value 0x3ebdcad9
-
Reply: 修改System init为procd-init后启动卡死
@chengwei_peng inittab文件内容如下:
::sysinit:/etc/init.d/rcS S boot ::shutdown:/etc/init.d/rcS K shutdown ::askconsole:/bin/ash --login
-
Reply: 修改System init为procd-init后启动卡死
@chengwei_peng 请教一下 ,您说的sbin/init是在target/allwinner/generice/base-files目录下的吗?目前这个目录下的init文件内容如下
#!/bin/sh # Copyright (C) 2006 OpenWrt.org export INITRAMFS=1 if [ -x /rdinit ];then exec /rdinit else exec /sbin/init fi
-
修改System init为procd-init后启动卡死
CPU为T113-s3
系统为d1s最新版的tina+补丁
板子为自制板,没有wifi以及蓝牙完整启动日志,最后卡在
Trying to connect to SWUpdate...
U-Boot 2018.07-ge987def5-dirty (Dec 31 2022 - 14:39:41 +0000) Allwinner Technology [00.298]CPU: Allwinner Family [00.301]Model: sun8iw20 I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH ready [00.322]DRAM: 128 MiB [00.325]Relocation Offset is: 04eff000 [00.344]secure enable bit: 0 [00.347]smc_tee_inform_fdt failed with: ffff000a [00.352]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz [00.358]gic: sec monitor mode sunxi flash map init [00.363]flash init start [00.365]workmode = 0,storage type = 2 [00.369][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [00.375][mmc]: SUNXI SDMMC Controller Version:0x50310 [00.400][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 4 [00.407]sunxi flash init ok [00.412]Loading Environment from SUNXI_FLASH... OK [00.437]Item0 (Map) magic is bad [00.440]the secure storage item0 copy0 magic is bad [00.455]Item0 (Map) magic is bad [00.458]the secure storage item0 copy1 magic is bad [00.463]Item0 (Map) magic is bad secure storage read widevine fail [00.469]secure storage read widevine fail with:-1 secure storage read ec_key fail [00.476]secure storage read ec_key fail with:-1 secure storage read ec_cert1 fail [00.483]secure storage read ec_cert1 fail with:-1 secure storage read ec_cert2 fail [00.491]secure storage read ec_cert2 fail with:-1 secure storage read ec_cert3 fail [00.498]secure storage read ec_cert3 fail with:-1 secure storage read rsa_key fail [00.505]secure storage read rsa_key fail with:-1 secure storage read rsa_cert1 fail [00.513]secure storage read rsa_cert1 fail with:-1 secure storage read rsa_cert2 fail [00.521]secure storage read rsa_cert2 fail with:-1 secure storage read rsa_cert3 fail [00.528]secure storage read rsa_cert3 fail with:-1 [00.533]out of usb burn from boot: not need burn key root_partition is rootfs set root to /dev/mmcblk0p5 [00.542]update part info [00.545]update bootcmd [00.548]change working_fdt 0x43ebee70 to 0x43e9ee70 [00.553][mmc]: no mmc-hs400-1_8v! [00.556][mmc]: delete mmc-hs200-1_8v from dtb [00.560][mmc]: get max-frequency ok 50000000 Hz disable nand error: FDT_ERR_BADPATH [00.577]update dts Hit any key to stop autoboot: 0 [01.670]no vendor_boot partition is found Android's image name: t113-hmi [01.681]Starting kernel ... [01.684][mmc]: mmc exit start [01.703][mmc]: mmc 2 exit ok [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.61 (ubuntu@ubuntu) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) 6.4.1, GNU ld (GNU Binutils) 2.27) #20 SMP PREEMPT Sat Dec 31 21:53:19 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: sun8iw20 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x47800000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440 [ 0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500400 clk_ignore_unused initcall_debug=0 console=ttyS1,115200 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:private@mmcblk0p6:rootfs_data@mmcblk0p7:UDISK@mmcblk0p8 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=2 androidboot.boot_type=2 gpt=1 uboot_message=2018.07-ge987def5-dirty(12/31/2022-14:39:41) androidboot.dramsize=128 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 109620K/131072K available (6144K kernel code, 280K rwdata, 1500K rodata, 1024K init, 1165K bss, 13260K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x3e8 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008016] Switching to timer-based delay loop, resolution 41ns [ 0.014181] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.023872] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.034220] pid_max: default: 32768 minimum: 301 [ 0.038962] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.046294] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.054612] CPU: Testing write buffer coherency: ok [ 0.059806] /cpus/cpu@0 missing clock-frequency property [ 0.065141] /cpus/cpu@1 missing clock-frequency property [ 0.070479] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.076631] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.083279] rcu: Hierarchical SRCU implementation. [ 0.088485] smp: Bringing up secondary CPUs ... [ 0.094093] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.094213] smp: Brought up 1 node, 2 CPUs [ 0.104007] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.110176] CPU: All CPU(s) started in SVC mode. [ 0.115251] devtmpfs: initialized [ 0.129279] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.137375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.147238] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.154457] pinctrl core: initialized pinctrl subsystem [ 0.160615] NET: Registered protocol family 16 [ 0.166485] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.201423] rtc_ccu: sunxi ccu init OK [ 0.207417] ccu: sunxi ccu init OK [ 0.211215] r_ccu: sunxi ccu init OK [ 0.232056] sun6i-dma 3002000.dma-controller: sunxi dma probed [ 0.239587] iommu: Default domain type: Translated [ 0.244610] sunxi iommu: irq = 24 [ 0.248825] SCSI subsystem initialized [ 0.252791] usbcore: registered new interface driver usbfs [ 0.258350] usbcore: registered new interface driver hub [ 0.263755] usbcore: registered new device driver usb [ 0.269596] Advanced Linux Sound Architecture Driver Initialized. [ 0.276439] Bluetooth: Core ver 2.22 [ 0.280077] NET: Registered protocol family 31 [ 0.284523] Bluetooth: HCI device and connection manager initialized [ 0.290931] Bluetooth: HCI socket layer initialized [ 0.295822] Bluetooth: L2CAP socket layer initialized [ 0.300899] Bluetooth: SCO socket layer initialized [ 0.306037] pwm module init! [ 0.310070] g2d 5410000.g2d: Adding to iommu group 0 [ 0.315384] G2D: rcq version initialized.major:252 [ 0.320900] clocksource: Switched to clocksource arch_sys_counter [ 0.335338] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver [ 0.344649] NET: Registered protocol family 2 [ 0.349549] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.357964] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.365654] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.372715] TCP: Hash tables configured (established 1024 bind 1024) [ 0.379158] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.385749] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.392909] NET: Registered protocol family 1 [ 0.399366] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.410637] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.416637] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.448665] io scheduler mq-deadline registered [ 0.453220] io scheduler kyber registered [ 0.458227] [DISP]disp_module_init [ 0.462199] disp 5000000.disp: Adding to iommu group 0 [ 0.467848] [DISP] parser_disp_init_para,line:1430: [ 0.467851] of_property_read fb0_width fail [ 0.493262] display_fb_request,fb_id:0 [ 0.500097] [DISP] Fb_copy_boot_fb,line:1445: [ 0.500101] no boot_fb0 [ 0.507355] disp_al_manager_apply ouput_type:0 [ 0.511172] [DISP]disp_module_init finish [ 0.512363] [DISP] lcd_clk_config,line:774: [ 0.512374] disp 0, clk: pll(420000000),clk(420000000),dclk(70000000) dsi_rate(70000000) [ 0.512374] clk real:pll(420000000),clk(420000000),dclk(105000000) dsi_rate(150000000) [ 0.516810] sunxi_sid_init()783 - insmod ok [ 0.541865] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator [ 0.552160] uart uart1: uart1 supply uart not found, using dummy regulator [ 0.559250] uart1: ttyS1 at MMIO 0x2500400 (irq = 34, base_baud = 1500000) is a SUNXI [ 0.567119] sw_console_setup()1807 - console setup baud 115200 parity n bits 8, flow n 571438] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.584884] printk: console [ttyS1] enabled [ 0.584884] printk: console [ttyS1] enabled [ 0.593773] printk: bootconsole [earlycon0] disabled [ 0.593773] printk: bootconsole [earlycon0] disabled [ 0.604992] uart uart3: uart3 supply uart not found, using dummy regulator [ 0.612974] uart3: ttyS3 at MMIO 0x2500c00 (irq = 35, base_baud = 1500000) is a SUNXI [ 0.622533] misc dump reg init [ 0.627106] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 [ 0.634325] [ADDR_MGT] addr_mgt_probe: success. [ 0.639694] dma-buf: Running sanitycheck [ 0.644133] dma-buf: Running dma_fence [ 0.648335] sizeof(dma_fence)=48 [ 0.652067] dma-buf: Running dma_fence/sanitycheck [ 0.657449] dma-buf: Running dma_fence/test_signaling [ 0.663133] dma-buf: Running dma_fence/test_add_callback [ 0.669090] dma-buf: Running dma_fence/test_late_add_callback [ 0.675544] dma-buf: Running dma_fence/test_rm_callback [ 0.681415] dma-buf: Running dma_fence/test_late_rm_callback [ 0.687762] dma-buf: Running dma_fence/test_status [ 0.693150] dma-buf: Running dma_fence/test_error [ 0.698424] dma-buf: Running dma_fence/test_wait [ 0.703614] dma-buf: Running dma_fence/test_wait_timeout [ 0.740911] dma-buf: Running dma_fence/test_stub [ 0.746107] dma-buf: Running dma_fence/race_signal_callback [ 0.820904] thread_signal_callback[0] completed 36130 passes, 145 misses [ 0.828460] thread_signal_callback[1] completed 36115 passes, 131 misses [ 0.871085] [DISP] disp_device_attached_and_enable,line:233: [ 0.871091] attached ok, mgr0<-->dev0 [ 0.890906] [DISP] disp_device_attached_and_enable,line:236: [ 0.890914] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8 [ 0.910909] thread_signal_callback[0] completed 30781 passes, 30780 misses [ 0.918646] thread_signal_callback[1] completed 42488 passes, 42486 misses [ 0.926917] libphy: Fixed MDIO Bus: probed [ 0.932313] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator [ 0.943780] gmac-power0: NULL [ 0.947108] gmac-power1: NULL [ 0.950432] gmac-power2: NULL [ 0.954827] Failed to alloc md5 [ 0.958384] eth0: Use random mac address [ 0.963073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.970395] sunxi-ehci: EHCI SUNXI driver [ 0.975416] get ehci1-controller wakeup-source is fail. [ 0.981396] sunxi ehci1-controller don't init wakeup source [ 0.987653] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0b61928, 0x:c8835000, irq_no:3c [ 0.999704] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator [ 1.012220] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator [ 1.024434] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller [ 1.031709] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1 [ 1.041723] sunxi-ehci 4200000.ehci1-controller: irq 60, io mem 0x04200000 [ 1.070919] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00 [ 1.078734] sunxi-ehci 4200000.ehci1-controller: ehci_irq: highspeed device connect [ 1.088169] hub 1-0:1.0: USB hub found [ 1.092447] hub 1-0:1.0: 1 port detected [ 1.097388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.104398] sunxi-ohci: OHCI SUNXI driver [ 1.109367] get ohci1-controller wakeup-source is fail. [ 1.115364] sunxi ohci1-controller don't init wakeup source [ 1.121651] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0b61bb8 [ 1.131349] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator [ 1.143854] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator [ 1.156055] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller [ 1.163342] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2 [ 1.173304] sunxi-ohci 4200400.ohci1-controller: irq 61, io mem 0x04200400 [ 1.255714] hub 2-0:1.0: USB hub found [ 1.259960] hub 2-0:1.0: 1 port detected [ 1.265161] usbcore: registered new interface driver uas [ 1.271258] usbcore: registered new interface driver usb-storage [ 1.278025] usbcore: registered new interface driver ums-alauda [ 1.284724] usbcore: registered new interface driver ums-cypress [ 1.291516] usbcore: registered new interface driver ums-datafab [ 1.298295] usbcore: registered new interface driver ums-freecom [ 1.305078] usbcore: registered new interface driver ums-jumpshot [ 1.311959] usbcore: registered new interface driver ums-karma [ 1.318543] usbcore: registered new interface driver ums-onetouch [ 1.325432] usbcore: registered new interface driver ums-sddr09 [ 1.332128] usbcore: registered new interface driver ums-sddr55 [ 1.338915] i2c /dev entries driver [ 1.342925] sunxi cedar version 1.1 [ 1.347066] sunxi-cedar 1c0e000.ve: Adding to iommu group 0 [ 1.353403] VE: sunxi_cedar_probe power-domain init!!! [ 1.359170] VE: install start!!! [ 1.359170] [ 1.364715] VE: cedar-ve the get irq is 41 [ 1.364715] [ 1.371204] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval) [ 1.371204] [ 1.380496] VE: install end!!! [ 1.380496] [ 1.385600] VE: sunxi_cedar_probe [ 1.389574] Bluetooth: HCI UART driver ver 2.3 [ 1.394577] Bluetooth: HCI UART protocol H4 registered [ 1.400353] Bluetooth: HCI UART protocol BCSP registered [ 1.406579] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10 [ 1.414668] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator [ 1.425939] sunxi-mmc 4022000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.25 2022-6-21 13:40) [ 1.435800] sunxi-mmc 4022000.sdmmc: ***ctl-spec-caps*** 308 [ 1.442210] sunxi-mmc 4022000.sdmmc: No vmmc regulator found [ 1.448558] sunxi-mmc 4022000.sdmmc: No vqmmc regulator found [ 1.455018] sunxi-mmc 4022000.sdmmc: No vdmmc regulator found [ 1.461517] usb 1-1: new high-speed USB device number 2 using sunxi-ehci [ 1.469088] sunxi-mmc 4022000.sdmmc: No vd33sw regulator found [ 1.475700] sunxi-mmc 4022000.sdmmc: No vd18sw regulator found [ 1.482259] sunxi-mmc 4022000.sdmmc: No vq33sw regulator found [ 1.488807] sunxi-mmc 4022000.sdmmc: No vq18sw regulator found [ 1.495378] sunxi-mmc 4022000.sdmmc: Cann't get pin bias hs pinstate,check if needed [ 1.504819] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.528576] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.552833] sunxi-mmc 4022000.sdmmc: detmode:alway in(non removable) [ 1.559990] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.572729] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.25 2022-6-21 13:40) [ 1.574655] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.582603] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 [ 1.595399] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.600221] sunxi-mmc 4020000.sdmmc: No vmmc regulator found [ 1.618139] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found [ 1.624645] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found [ 1.631122] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found [ 1.637665] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found [ 1.637924] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.644229] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found [ 1.655917] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.662413] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found [ 1.676987] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.692691] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.703906] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator [ 1.707449] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.724105] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.735521] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 1.745547] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 1.745780] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.755345] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 1.762207] sunxi-mmc 4020000.sdmmc: detmode:alway in(non removable) [ 1.771979] sunxi-mmc 4022000.sdmmc: avoid to switch power_off_notification to POWERED_ON(0x01) [ 1.779205] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.789264] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B [ 1.801599] sunxi_led_probe()1749 - start [ 1.812589] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing MMC-HS(SDR20) dt B [ 1.816786] sunxi_get_str_of_property()1595 - failed to get the string of propname led_regulator! [ 1.828697] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing MMC-HS(SDR20) dt B [ 1.838429] scsi host0: usb-storage 1-1:1.0 [ 1.850330] sunxi_register_led_classdev()1483 - led_classdev start [ 1.854924] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 1.861902] sunxi-mmc 4020000.sdmmc: smc 1 p0 err, cmd 8, RTO !! [ 1.873549] sunxi-mmc 4020000.sdmmc: smc 1 p0 err, cmd 55, RTO !! [ 1.880310] sunxi-mmc 4020000.sdmmc: smc 1 p0 err, cmd 55, RTO !! [ 1.887169] sunxi-mmc 4020000.sdmmc: smc 1 p0 err, cmd 55, RTO !! [ 1.894035] sunxi-mmc 4020000.sdmmc: smc 1 p0 err, cmd 55, RTO !! [ 1.894063] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 1.901020] sunxi-mmc 4022000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing MMC-DDR52 dt B [ 1.908773] sunxi_led_probe()1845 - finish [ 1.919104] mmc0: new DDR MMC card at address 0001 [ 1.930517] exFAT: Version 1.3.0 [ 1.935877] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB [ 1.942319] [AUDIOCODEC][sunxi_codec_parse_params][2437]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1 [ 1.942319] [ 1.944157] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (248:0) [ 1.948955] [AUDIOCODEC][sunxi_codec_parse_params][2473]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0 [ 1.949415] [AUDIOCODEC][sunxi_internal_codec_probe][2634]:codec probe finished [ 1.975793] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 1.986233] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present! [ 2.008227] [SNDCODEC][sunxi_card_init][583]:card init finished [ 2.015367] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok [ 2.026259] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0 [ 2.038209] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished [ 2.046603] NET: Registered protocol family 10 [ 2.051637] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch [ 2.059998] Segment Routing with IPv6 [ 2.064258] NET: Registered protocol family 17 [ 2.069406] Bluetooth: RFCOMM TTY layer initialized [ 2.074930] Bluetooth: RFCOMM socket layer initialized [ 2.080721] Bluetooth: RFCOMM ver 1.11 [ 2.085493] Registering SWP/SWPB emulation handler [ 2.106198] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator [ 2.118715] get ehci0-controller wakeup-source is fail. [ 2.124742] sunxi ehci0-controller don't init wakeup source [ 2.131016] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b61408, 0x:c88b2000, irq_no:3a [ 2.143032] [sunxi-ehci0]: Not init ehci0 [ 2.147860] get ohci0-controller wakeup-source is fail. [ 2.153830] sunxi ohci0-controller don't init wakeup source [ 2.160088] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0b61698 [ 2.169766] [sunxi-ohci0]: Not init ohci0 [ 2.174971] otg manager soc@3000000:usbc0@0: soc@3000000:usbc0@0 supply usbc not found, using dummy regulator [ 2.188408] clk: Not disabling unused clocks [ 2.193382] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 2.203093] cfg80211: failed to load regulatory.db [ 2.203106] ALSA device list: [ 2.211827] #0: audiocodec [ 2.215063] alloc_fd: slot 0 not NULL! [ 2.225896] EXT4-fs (mmcblk0p5): mounted filesystem without journal. Opts: (null) [ 2.234407] VFS: Mounted root (ext4 filesystem) readonly on device 179:5. [ 2.242654] devtmpfs: mounted [ 2.247876] Freeing unused kernel memory: 1024K [ 2.271059] Run /sbin/init as init process [ 2.302564] init: Console is alive [ 2.306613] init: - preinit - /etc/preinit: line 1: strings: not found /etc/preinit: line 1: head: not found formating /dev/by-name/UDISK to ext4 mke2fs 1.46.4 (18-Aug-2021) [ 2.451713] random: fast init done Discarding device blocks: [ 2.490794] random: mkfs.ext4: uninitialized urandom read (1done [ 2.499600] random: mkfs.ext4: uninitialized urandom read (16 bytes read) Creating filesystem with 1360510 4k blocks and 340704 inodes Filesystem UUID: c259e7de-c4a4-4f64-bfb2-3d0cfdbfa846 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): [ 2.953302] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4 [ 2.964012] sd 0:0:0:0: [sda] 15131636 512-byte logical blocks: (7.75 GB/7.21 GiB) [ 2.973256] sd 0:0:0:0: [sda] Write Protect is off [ 2.978638] sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 2.984990] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.048896] sda: sda4 [ 3.054875] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.322800] random: procd: uninitialized urandom read (4 bytes read) done Writing superblocks and filesystem accounting information: done formating /dev/by-name/rootfs_data to ext4 mke2fs 1.46.4 (18-Aug-2021) Discarding device blocks: [ 4.141111] random: mkfs.ext4: uninitialized urandom read (16 bydone [ 4.149398] random: mkfs.ext4: uninitialized urandom read (16 bytes read) Creating filesystem with 524288 4k blocks and 131072 inodes Filesystem UUID: 2704ad51-f026-4685-b7be-698c3b123cc2 Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done [ 5.688940] mount_root: mounting /dev/root [ 5.693870] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null) [ 5.700096] mount_root: loading kmods from internal overlay [ 5.762620] block: attempting to load /etc/config/fstab [ 5.771258] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator e2fsck 1.46.4 (18-Aug-2021) /dev/by-name/UDISK: clean, 11/340704 files, 43096/1360510 blocks [ 5.803736] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: [ 5.819708] mount_root: switched to extroot [ 5.830584] procd: - early - [ 5.843791] random: procd: uninitialized urandom read (4 bytes read) [ 5.919511] procd: - ubus - [ 5.923211] procd (1): /proc/138/oom_adj is deprecated, please use /proc/138/oom_score_adj instead. [ 5.930277] random: ubusd: uninitialized urandom read (4 bytes read) [ 5.974527] random: ubusd: uninitialized urandom read (4 bytes read) [ 5.982937] procd: - init - [ 6.154072] file system registered [ 6.173352] configfs-gadget 4100000.udc-controller: failed to start g1: -19 [ 6.197754] ======== XRADIO WIFI OPEN ======== [ 6.205864] [XRADIO] Driver Label:XR_V02.16.85_P2P_HT40_01.31 [ 6.213276] [XRADIO] Allocated hw_priv @ (ptrval) [ 6.253085] read descriptors [ 6.256364] read strings [ 6.330325] [XRADIO] Detect SDIO card 0 [ 6.500490] android_work: sent uevent USB_STATE=CONNECTED [ 8.471062] [XRADIO] Remove SDIO card 0 [ 8.485369] [SBUS_ERR] sdio probe timeout! [ 8.489960] [XRADIO_ERR] sbus_sdio_init failed [ 8.495265] xradio_core_init failed (-110)! kmodloader done Trying to connect to SWUpdate... [ 32.530937] usb1-vbus: disabling [ 36.665366] configfs-gadget gadget: high-speed config #1: c [ 36.671783] android_work: sent uevent USB_STATE=CONFIGURED [ 36.678039] android_work: sent uevent USB_STATE=DISCONNECTED [ 36.684489] android_work: sent uevent USB_STATE=CONNECTED [ 123.771071] random: crng init done [ 123.774895] random: 2 urandom warning(s) missed due to ratelimiting
参考网上文档,修改如下内容