Linux does not Boot!!
Allwiner D1 RISCV board.
How to fix this problem?

partdata hi 0x0
partdata lo 0x4059c
sparse: bad magic
[7210.789]successed in writting part dsp0
[7210.794]fill gap start: volume dsp0 sects 0x1ed
[7210.882]fill gap end: volume dsp0
origin_verify value = 413a5c54, active_verify value = 413a5c54
[7210.917]successed in verify part dsp0
[7210.921]successed in download part dsp0
[7210.924]begin to download part rootfs
partdata hi 0x0
partdata lo 0xede29000
sparse: bad magic
[7423.777]successed in writting part rootfs
[7423.782]fill gap start: volume rootfs sects 0x890eb8
[9125.436]fill gap end: volume rootfs
[9125.443]ubi0 warning: ubi_io_read: error -22 while reading 225280 bytes from PEB 2135278096:36864, read only 0 bytes, retry
[9125.454]ubi0 warning: ubi_io_read: error -22 while reading 225280 bytes from PEB 2135278096:36864, read only 0 bytes, retry
[9125.465]ubi0 warning: ubi_io_read: error -22 while reading 225280 bytes from PEB 2135278096:36864, read only 0 bytes, retry
[9125.476]ubi0 error: ubi_io_read: error -22 while reading 225280 bytes from PEB 2135278096:36864, read 0 bytes
read err ffffffea
sunxi sprite: read flash error when verify
origin_verify value = be3b030e, active_verify value = 0
origin checksum=be3b030e, active checksum=0
sunxi sprite: part ROOTFS_FEX000000VROOTFS_FEX00000 verify error
line:765 sunxi sprite err: sunxi_sprite_deal_part, download private failed
sunxi sprite error : download part error
sprite_test - do a sprite test

Usage:
sprite_test NULL