@momoyu 在 V821烧录错误Error!!!: Wait for Fes Device Timeout... 中说：

板子的串口输出信息呢？ 没用过linux的烧录工具，只用过window的。

解决了我板子是NAND Flash烧了norflash的镜像所以出问题了，镜像改回NAND flash版本的可以正常在ubuntu下命令行直接烧录。

ubuntu使用phoenixsuit烧录出现问题Wait for Fes Device Timeout：日志如下Dev Plugin The Device Path is: /dev/aw_efex0
Begin Burn the image!
0%Register./luaBase.dll l_RegAllFun Sucess!
Register./luaeFex.dll l_RegAllFun Sucess!
Register./luadec.dll l_RegAllFun Sucess!
IMAGEWTY
ItemTableSize = 1048576
Closing image now!

Clos image OK!

[TL_MSG]:--------------Init Called------------------

workDir /home/ageek/Bin/phoenixsuit/phoenixsuit
ImgLenHigh 0
ImgLenLow 15341568
Mode 8
hWnd 0
imgFilePath /home/ageek/v821_sdk/tina-v821/out/v821l2-wxx_linux_perf2b_uart0_nor.img
[TL_MSG]:Mode = 8, ImgLenHigh=0, ImgLenLow = ea1800, imgFilePath = /home/ageek/v821_sdk/tina-v821/out/v821l2-wxx_linux_perf2b_uart0_nor.img

<TL_ERRCODE>Err: usbtool.lua_577>:func ToolErrCodeCBack is not registered yet!

<TL_IMG>Err:usbtool.lua_624>:usbtool.lua/func[Tools_Img], Fail to get ui callBack fun

IMAGEWTY
ItemTableSize = 1048576
[TL_MSG]:Tools Open Img

[TL_MSG]:---fun end---

[TL_MSG]:plugin create by allwinner, version : V1.0.4, last fix author : AWA1746, fix time : 27.11.2024

[TL_MSG]:--------------entry-fel2fes Called-----------

felDevName /dev/aw_efex0
[TL_MSG]:Hi, I'm fel, dev=/dev/aw_efex0

<TL_ERRCODE>Err: usbtool.lua_577>:func ToolErrCodeCBack is not registered yet!

[TL_FEX_DEV]Errusbtool.lua_870>:usbtool.lua/func[Tools_Fex_Dev], Fail to get ui callBack fun

[TL_MSG]:func[entry_fel2fes] To down and Run fes1 (init dram)

[TL_MSG]:fes1 down file length = 0x43e0

[TL_MSG]:fes1 down addr = 0x2008000, retAddr =0x2008340

[TL_FEX_DEV]:DOWN fes1 addr=0x2008000, len=17376

[TL_FEX_DEV]:call FelUpData function

[TL_FEX_DEV]:fel UP addr=0x2008340, len=136

[TL_MSG]:SYS_PARA_LOG read = 0x4d415244

[TL_MSG]:dram paras[0]: 0x208

[TL_MSG]:dram paras[1]: 0x2

[TL_MSG]:dram paras[2]: 0x7b7bf9

[TL_MSG]:dram paras[3]: 0x0

[TL_MSG]:dram paras[4]: 0xd2

[TL_MSG]:dram paras[5]: 0x400000

[TL_MSG]:dram paras[6]: 0xe73

[TL_MSG]:dram paras[7]: 0x2

[TL_MSG]:dram paras[8]: 0x0

[TL_MSG]:dram paras[9]: 0x0

[TL_MSG]:dram paras[10]: 0x469991

[TL_MSG]:dram paras[11]: 0x131a10c

[TL_MSG]:dram paras[12]: 0x56040

[TL_MSG]:dram paras[13]: 0xb4787896

[TL_MSG]:dram paras[14]: 0x0

[TL_MSG]:dram paras[15]: 0x48484848

[TL_MSG]:dram paras[16]: 0x48

[TL_MSG]:dram paras[17]: 0x1621121e

[TL_MSG]:dram paras[18]: 0x0

[TL_MSG]:dram paras[19]: 0x0

[TL_MSG]:dram paras[20]: 0x0

[TL_MSG]:dram paras[21]: 0x0

[TL_MSG]:dram paras[22]: 0x0

[TL_MSG]:dram paras[23]: 0x34006101

[TL_MSG]:dram paras[24]: 0x0

[TL_MSG]:dram paras[25]: 0x0

[TL_MSG]:dram paras[26]: 0x0

[TL_MSG]:dram paras[27]: 0x0

[TL_MSG]:dram paras[28]: 0x0

[TL_MSG]:dram paras[29]: 0x0

[TL_MSG]:dram paras[30]: 0x0

[TL_MSG]:dram paras[31]: 0x0

[TL_MSG]:func[entry_fel2fes] To down and Run uboot

[TL_MSG]:u-boot down addr = 0x82000000, length=0xa4000

[TL_MSG]:workmode = 0x10

[TL_FEX_DEV]:DOWN fes1 addr=0x82000000, len=671744

[TL_MSG]:dtb down addr = 0x82200000, length=0x12800

<TL_ERR>:usbtool.lua_2180>:is_dtb_noexist is false

[TL_FEX_DEV]:DOWN fes1 addr=0x82200000, len=75776

[TL_MSG]:sysconfig down addr = 0x82300000

[TL_FEX_DEV]:DOWN fes1 addr=0x82300000, len=4096

[TL_MSG]:[fel] entry_fel2fes(): ---fun end---

Fel Thread Finished!

Error!!!: Wait for Fes Device Timeout...
[TL_MSG]:---------------Exit Called-----------------

Closing image now!

Clos image OK!

[TL_MSG]:Tools Close Img ...

[TL_MSG]:function: Exit(): ---fun end---

@nikola 分区boot-resource的大小改了之后还是8M大小

sys_partition.fex内找不到关于SD卡的/dev/mmcblk0p1的分区，不知道怎么修改。

小白求教，D1-H的mnt/SDCARD只有8M，SD卡剩余空间怎么才能改大一点，方便放程序和图片，用SD读卡器可以直接放到mnt/SDCARD。