soso90 创建的主题

@soso90 具体操作啥时候贴出😊😊😋

@whycan 排查最后，发现是t113才会有这个问题，配置ft的触摸芯片，一插入驱动就报错。这个你遇到过没~微信图片_20230522125032.png 微信图片_20230522125028.png

@yuan123 是不是没有使能背光

请问楼主解决了吗，目前我也是遇到一样的问题

@soso90 接了串口，还是这个错误，然后就播放停止。没有其他提示~~ 尝试过播放其他视频又不会。难道是片源问题

@soso90
链接已过时（https://pan.baidu.com/s/11JX9EHOOMgs8ARpslwmuGw?pwd=cye5 ），请更新。

调整了极性后。能出图。现在开始进入触摸的坑：
目前启动后，i2c报错。dts按照荔枝派86盒子的配置配置触摸
[ 13.835167] input: fts_ts as /devices/platform/soc@3000000/twi2/i2c-2/2-0048/input/input3
[ 13.875092] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 13.911070] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x48, dev addr: 0x48)
[ 13.948346] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[ 13.955742] fts_ts 2-0048: 2-0048 supply not found, using dummy regulator
[ 13.995184] fts_ts 2-0048: 2-0048 supply not found, using dummy regulator
[ 14.002891] debugfs: Directory '2-0048-' with parent 'reg-dummy-regulator-dummy' already present!
[ 14.237069] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[ 14.315243] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.355227] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.395316] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.415094] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[ 14.435258] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.471104] android_work: sent uevent USB_STATE=CONNECTED
[ 14.477626] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.505999] sunxi_set_cur_vol_work()394 WARN: get power supply failed
[ 14.565333] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.605320] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.645250] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.685332] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.725351] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.765251] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.805276] sunxi_i2c_do_xfer()1816 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x48)
[ 14.855092]

@duanmuyi 没搞过。看看论坛，应该有帖子适配过了

https://www.bilibili.com/video/BV1bB4y1z7FY?spm_id_from=444.41.list.card_archive.click&vd_source=5bd1cb1eb42515f034a1fbba36e708e0

这个屏esp32+lvgl效果。暂时不研究跑在d1s+lvgl效果。这个坑，给其他人填了~