@joeydeng
贴全部日志看看
whycan 发布的帖子
-
回复: 请问全志的镜像可以dd制作是什么意思呢？发布在 编译和烧写问题专区
linux的命令行dd 相当于 win32diskimager
可以把设备(硬盘/TF卡/FLASH)数据原样读出成文件，也可以原样写回这些设备上去．
-
回复: sunxi-tool具体作用是什么？F1C200s & SD卡，能否使用这个工具？发布在 Linux
sunxi-fel 是 sunxi-tools 的其中一个工具．
需要PE2上拉做USB device模式
不需要
每次上电都需要重新下载uboot、zImage、dtb、rootfs
如果是通过 sunxi-fel 下载到ddr，那复位当然都没有了，需要重新下载．
对于只有64MDDR1内存的F1C200s来说（无交换分区），无法跑Debian
可以开辟swap分区
-
回复: F1C200s移植tslib触摸测试库报错发布在 Linux
@kashine 在 F1C200s移植tslib触摸测试库报错 中说：
arm-linux-gnueabi
大概率是工具链的原因,估计是里面有arm9不支持的指令,buildroot用这个工具链编译出来的文件系统,F1C100s同样不执行.
-
回复: T113 emmc启动，挂载rootfs失败发布在 MR Series
@xucw15990192241 在 T113 emmc启动，挂载rootfs失败 中说：
[ 2.249963] sun8iw20-pinctrl 2000000.pinctrl: pin PC2 already requested by 4025000.spi; cannot claim for 4022000.sdmmc
[ 2.261942] sun8iw20-pinctrl 2000000.pinctrl: pin-66 (4022000.sdmmc) status -22
[ 2.270096] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 66 (PC2) from group PC2 on device 2000000.pinctrl
[ 2.282043] sunxi-mmc 4022000.sdmmc: Error applying setting, reverse things back
[ 2.290332] sunxi-mmc: probe of 4022000.sdmmc failed with error -22需要先解决这个问题.
-
回复: V3S 5.4找不到fb0节点发布在 其它全志芯片讨论区
参考这个帖子(V3s/V3x/S3/S3L/R11通吃)小智V3x开发板smallwitpi lite u-boot/linux/buildroot测试
主线Linux用drm或者simplefb驱动显示屏.
-
回复: 调试 t113_whycanpii-tina 方案的 mipi 显示问题发布在 其它全志芯片讨论区
@justyu666
可能C库不一致，上面SDK里面有一个是 glibc, 有一个是musl。
-
回复: A133 longan 平台 RT8723DS WIFI 测试发布在 其它全志芯片讨论区
扫描:
wpa_cli -iwlan0 scan读取扫描接口:
wpa_cli -iwlan0 scan_resultroot@dragonboard:~# root@dragonboard:~# wpa_cli -iwlan0 scan OK root@dragonboard:~# root@dragonboard:~# root@dragonboard:~# wpa_cli -iwlan0 scan_result bssid / frequency / signal level / flags / ssid c8:bf:4c:d5:43:88 2412 -63 [ESS] Xiaomi_C12D_3ED2 72:3d:d6:25:ac:3b 2462 -70 [WPA2-PSK-CCMP][ESS] whycan
-
A133 longan 平台 RT8723DS WIFI 测试发布在 其它全志芯片讨论区
① 新建 /etc/wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 ap_scan=1 network={ ssid="whycan" psk="13800138000" }② 安装驱动:
insmod /lib/modules/4.9.170/8723ds.ko③ 运行:
wpa_supplicant -D nl80211 -i wlan0 -c/etc/wpa_supplicant.conf -B④ 执行:
udhcpc -i wlan0
-
回复: T507使用mcp2515转CAN问题发布在 飞凌嵌入式专区
spi_board1 { device_type = "spi_board1"; compatible = "rohm,dh2228fv"; spi-max-frequency = <0x5f5e100>; reg = <0x0>; spi-rx-bus-width = <0x1>; spi-tx-bus-width = <0x1>; status = "okay"; };这个能检测到吗?
-
回复: T507使用mcp2515转CAN问题 发布在 飞凌嵌入式专区
-
回复: 试一试用 全志 AIC800 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏发布在 MR Series
@apollo5520 在 试一试用 全志 AIC800 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏 中说：
大佬，最近也在搞A133的双屏显示，MIPI+单8LVDS，单个屏幕都可以了，双屏怎么都没配好，能分享一下这个双屏显示的dts文件不？
谢谢！A133/R818 都不能双显，PD（LCD0）/PJ(LCD1)组都引出来的T509可以双显。
-
回复: V853 LVGL使用TP，屏幕中间控件无法响应发布在 V Series
或者再试一试这个固件:
哪吒D1开发板 LVGL7 源码下载（带git仓库）
https://bbs.aw-ol.com/topic/303/share/35
-
回复: 试一试用 全志 AIC800 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏发布在 MR Series
@whycan 在 试一试用 全志 AIC800 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏 中说：
@uuuuid 在 试一试用 全志 A133 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏 中说：
看了一些资料, A133的显示屏在同一组GPIO上, 要想异显可能有点困难?
反复观摩A133手册和其他pdf，想用PD一组实现双屏异显，基本不太可能．
disp: disp@06000000 { disp_init_enable = <1>; disp_mode = <0>; screen0_output_type = <1>; screen0_output_mode = <4>; screen0_output_format = <0>; screen0_output_bits = <0>; screen0_output_eotf = <4>; screen0_output_cs = <257>; screen0_output_dvi_hdmi = <2>; screen0_output_range = <2>; screen0_output_scan = <0>; screen0_output_aspect_ratio = <8>; screen1_output_type = <1>; screen1_output_mode = <4>; screen1_output_format = <0>; screen1_output_bits = <0>; screen1_output_eotf = <4>; screen1_output_cs = <257>; screen1_output_dvi_hdmi = <2>; screen1_output_range = <2>; screen1_output_scan = <0>; screen1_output_aspect_ratio = <8>; dev0_output_type = <1>; dev0_output_mode = <4>; dev0_screen_id = <0>; dev0_do_hpd = <0>; dev1_output_type = <1>; dev1_output_mode = <4>; dev1_screen_id = <1>; dev1_do_hpd = <1>; def_output_dev = <0>; hdmi_mode_check = <1>; fb0_format = <0>; fb0_width = <1024>; fb0_height = <600>; fb1_format = <0>; fb1_width = <1024>; fb1_height = <600>; chn_cfg_mode = <1>; disp_para_zone = <1>; /*VCC-LCD*/ dc1sw-supply = <>; /*VCC-DSI*/ eldo3-supply = <>; /*VCC-PD*/ dcdc1-supply = <>; status = "okay"; };lcd0: lcd0@01c0c000 { lcd_used = <1>; lcd_driver_name = "default_lcd"; lcd_backlight = <255>; lcd_if = <3>; lcd_x = <1024>; lcd_y = <600>; lcd_width = <155>; lcd_height = <86>; lcd_dclk_freq = <66>; lcd_pwm_used = <1>; lcd_pwm_ch = <3>; //PD21 pwm3 lcd_pwm_freq = <50000>; lcd_pwm_pol = <1>; lcd_pwm_max_limit = <255>; lcd_hbp = <230>; lcd_ht = <1400>; lcd_hspw = <130>; lcd_vbp = <100>; lcd_vt = <786>; lcd_vspw = <1>; lcd_lvds_if = <2>; lcd_lvds_colordepth = <0>; lcd_lvds_mode = <0>; lcd_frm = <1>; lcd_hv_clk_phase = <0>; lcd_hv_sync_polarity= <0>; lcd_io_phase = <0x0001>; lcd_gamma_en = <0>; lcd_bright_curve_en = <0>; lcd_cmap_en = <0>; // lcd_fsync_en = <1>; // lcd_fsync_act_time = <1000>; // lcd_fsync_dis_time = <1000>; // lcd_fsync_pol = <0>; // deu_mode = <0>; // lcdgamma4iep = <22>; // smart_color = <90>; // lcd_pin_power; // lcd_power; lcd_gpio_0 = <&pio PB 8 1 1 3 1>; //PB8 GM8284 lcd_gpio_1 = <&pio PH 12 1 1 3 1>; //PH12 PANEL POWER pinctrl-0 = <&lvds1_pins_c>; pinctrl-1 = <&lvds1_pins_d>; status = "okay"; };上面是两个单8LVDS 同显，单8 LVDS异显感觉没法实现了．
至于MIPI + 单8LVDS 异显，得再测一测才行．
-
回复: 试一试用 全志 AIC800 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏发布在 MR Series
@uuuuid 在 试一试用 全志 A133 LCD0 PD0-PD9 驱动 15寸的LVDS电脑显示屏 中说：
看了一些资料, A133的显示屏在同一组GPIO上, 要想异显可能有点困难?
反复观摩A133手册和其他pdf，想用PD一组实现双屏异显，基本不太可能．
-
回复: 系统突然起不来了发布在 Linux
https://mariadb.com/kb/en/operating-system-error-codes/
error 2 ENOENT No such file or directory
-
回复: 芒果t113编译SDK和全志D1-H编译SDK提示Signing key has not been configured发布在 MR Series
@justyu666
source build/envsetup.sh
lunch都执行了吗?
-
回复: V853 LVGL使用TP，屏幕中间控件无法响应发布在 V Series
替换这个文件 kernel/linux-4.9/drivers/input/touchscreen/gslx680new/gslX680_3680.h
-
回复: 哪位有T113S3驱动mipi屏幕代码吗发布在 其它全志芯片讨论区
分享T113资料，百度网盘：
https://pan.baidu.com/s/1h-yRCvY3I7fhlVL9tVIfvw?pwd=awol
提取码:awol这sdk里面都是mipi显示屏
-
回复: A133 芯片 io 调试发布在 其它全志芯片讨论区
cat /sys/kernel/debug/pwm
root@dragonboard:/sys/kernel/debug/dispdbg# cat /sys/kernel/debug/pwm platform/300a000.pwm, 16 PWM devices pwm-0 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-1 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-2 (lcd ): requested period: 20000 ns duty: 7812 ns polarity: normal pwm-3 (lcd ): requested enabled period: 20000 ns duty: 19922 ns polarity: inverse pwm-4 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-5 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-6 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-7 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-8 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-9 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-10 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-11 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-12 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-13 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-14 ((null) ): period: 0 ns duty: 0 ns polarity: normal pwm-15 ((null) ): period: 0 ns duty: 0 ns polarity: normal
-
回复: RMII接口调试全志的外置PHY网口时，tx-delay，rx-delay参数怎么填？发布在 其它全志芯片讨论区
参考: d1-tina-linux-emac-开发指南.pdf
（8）”tx-delay” tx 时钟延迟，tx-delay 取值 0-7，一档约 536ps（皮秒）；
（9）”rx-delay ” rx 时钟延迟，rx-delay 取值 0-31，一档约 186ps（皮秒）；
-
回复: A133 Android USB摄像头无法使用,请问是什么问题?发布在 其它全志芯片讨论区
@cola123456
可以发个帖子说一下一路 uvc怎么出来的吗？我这边找小伙伴重现问题试一试。
-
回复: uboot下执行key_test adc_driver，发现例程里gpadc检测不到按键发布在 V Series
@pengjunchao
我这边测试也是 -1打印寄存器也是对的
=> key_test adc_driver GP_CTRL = 0x2009004 gpadc read volxxxxxx: -1 gpadc read volxxxxxx: -1 gpadc read volxxxxxx: -1
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
写入 rotpk.bin 前后比较:
=> md.b 0x03006000 03006000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006060: c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006090: 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $............... 030060a0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006120: a3 00 00 00 9c 00 00 00 ad 00 00 00 2c 00 00 00 ............,... 03006130: 87 00 00 00 59 00 00 00 b8 00 00 00 c5 00 00 00 ....Y........... 03006140: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006200: 00 78 c0 62 20 48 00 2c 4c 04 43 01 cc 15 6c 50 .x.b H.,L.C...lP 03006210: 00 00 00 00 f5 d0 96 71 49 97 8d 00 19 13 d4 0f .......qI....... 03006220: bb 0d af 12 00 60 06 81 16 13 69 00 00 00 00 00 .....`....i..... 03006230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006710: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006720: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006730: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006740: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006750: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006760: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006770: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006790: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030067f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006810: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006840: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006850: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006860: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006870: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006890: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030068f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006910: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006920: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006930: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006940: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006950: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006960: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006970: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006990: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030069f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006a90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006aa0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ab0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ac0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ad0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006b90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ba0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006bb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006bc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006c90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ca0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006cb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006cc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006cd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006ce0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006cf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006d90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006da0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006db0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006dc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006dd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006de0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006df0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006e70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
SID_RDKEY 和 SID_ROTPK_CTRL 受到影响.
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
[110]HELLO! SBOOT is starting! [112]sboot commit : 4b419f21ba [116]PMU: AXP21 [119]set pll start [121]periph0 has been enabled [124]set pll end [126]board init ok [127]rtc[0] value = 0x80000002 [130]DRAM use external ZQ!! [133]chip id check OK [135]DRAM_VCC set to 1500 mv [138]DRAM BOOT DRIVE INFO: V0.16 [141]DRAM CLK = 936 MHz [143]DRAM Type = 3 (2:DDR2,3:DDR3) [147]DRAMC ZQ value: 0x7b7bfb [149]DRAM ODT value: 0x42. [153]DRAM SIZE =512 M [155]dram_tpr4:0x0 [158]DRAM simple test OK. [160]rtc standby flag is 0x0, super standby flag is 0x0 [166]dram size =512 [168]audio:avcc calibration [170][mmc]: mmc driver ver 2021-12-27 10:07 [180][mmc]: Wrong media type 0x0, but host sdc2, try mmc first [185][mmc]: ***Try MMC card 2*** [200][mmc]: RMCA OK! [202][mmc]: bias 100 [204][mmc]: mmc 2 bias 100 [207][mmc]: MMC 5.1 [209][mmc]: HSSDR52/SDR25 8 bit [212][mmc]: 50000000 Hz [214][mmc]: 7400 MB [216][mmc]: ***SD/MMC 2 init OK!!!*** [281]read toc1 from emmc 32800 sector [284]OLD version: 0.0 [286]NEW version: 0.0 [290]have rotpk, do check [353]load rotpk hash [415]load boot-key hash [417]load boot hash [550]monitor entry=0x0 [552]uboot entry=0x43000000 [555]optee entry=0x41980000 [557]opensbi entry=0x0 [559]no need rotpk flag [562]tunning data addr:0x430003e8 [565]drm_region_size is 0 [567]run out of boot0 M/TC: OP-TEE version: 15ee1539b (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Tue Mar 29 06:48:41 UTC 2022 arm U-Boot 2018.05 (Nov 06 2022 - 13:44:39 +0800) Allwinner Technology [00.749]CPU: Allwinner Family [00.752]Model: sun8iw21 I2C: ready [00.779]DRAM: 512 MiB [00.782]Relocation Offset is: 1ced0000 [00.807]secure enable bit: 1 E/TC:0 fdt_getprop_u32:343 prop trace_level not found [00.822]PMU: AXP21 [00.824]BMU: AXP21 FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL bias_name:pc_bias bias_vol:1800 bias_name:pi_bias bias_vol:1800 [00.848]CPU=900 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=24Mhz MBus=300Mhz [00.854]gic: sec monitor mode sunxi flash map init [00.859]flash init start [00.861]workmode = 0,storage type = 2 [00.864][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [00.870][mmc]: get sdc_type fail and use default host:tm4. [00.876][mmc]: SUNXI SDMMC Controller Version:0x50400 [00.904][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 8 [00.911]sunxi flash init ok [00.926]line:724 init_clocks [00.929]drv_disp_init request pwm success, pwm9:pwm9:0x2000c00. [00.943]drv_disp_init finish [00.947]Loading Environment from SUNXI_FLASH... OK [00.958]boot_gui_init:start [00.961]set disp.dev2_output_type fail. using defval=0 [00.966][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [00.971][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [00.976][ICN6202 TO LVDS] LINE:0167-->lcd_power_on: [00.993]boot_gui_init:finish partno erro : can't find partition bootloader 54 bytes read in 0 ms [01.002]bmp_name=bootlogo.bmp size 38454 [01.006][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.011][ICN6202 TO LVDS] LINE:0575-->lcd_panel_init: [01.177][ICN6202 TO LVDS] LINE:0620-->lcd_panel_init:initialization:icn6202 init reg from mipi 38454 bytes read in 192 ms (195.3 KiB/s) [01.218]Item0 (Map) magic is bad [01.220]the secure storage item0 copy0 magic is bad [01.237]Item0 (Map) magic is bad [01.240]the secure storage item0 copy1 magic is bad [01.245]Item0 (Map) magic is bad [01.248]out of usb burn from boot: not need burn key root_partition is rootfs set root to /dev/mmcblk0p4 [01.257]update part info [01.260]update bootcmd [01.262]change working_fdt 0x5de8fe70 to 0x5de6fe70 [01.269][mmc]: delete mmc-hs400-1_8v from dtb [01.273][mmc]: delete mmc-hs200-1_8v from dtb [01.277][mmc]: get max-frequency ok 50000000 Hz disable nand error: FDT_ERR_BADPATH [01.291]The storage not support sample function [01.297]## error: update_fdt_dram_para : FDT_ERR_NOTFOUND [01.305][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.312]update dts [01.315][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.320][ICN6202 TO LVDS] LINE:0203-->lcd_bl_open: [01.327][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.331][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.336]LCD open finish Hit any key to stop autoboot: 0 pubkey boot valid [02.484]no vendor_boot partition is found Android's image name: v853-vision [02.534]Starting kernel ... [02.536][mmc]: mmc exit start [02.554][mmc]: mmc 2 exit ok [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.191 (whycan@ubuntu) (gcc version 6.4.1 (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) ) #20 PREEMPT Sun Nov 6 05:54:56 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: sun8iw21 [ 0.000000] ion_mem_reserve: err format for ion reserve list! [ 0.000000] disp reserve base 0x5df1a000 ,size 0x3e8000 [ 0.000000] Reserved memory: created DMA memory pool at 0x47bc0000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@0x47BC0000, compatible id shared-dma-pool [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 129980 [ 0.000000] free_area_init_node: node 0, pgdat c0b552f4, node_mem_map dfbf8000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129980 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128956 [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p4 rootwait init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:boot@mmcblk0p3:rootfs@mmcblk0p4:rootfs_data@mmcblk0p5:recovery@mmcblk0p6:UDISK@mmcblk0p7 cma= mac_addr= wifi_mac= bt_mac= selinux= specialstr= coherent_pool=32K ion_carveout_list= androidboot.mode=normal androidboot.hardware=sun8iw21p1 boot_type=2 androidboot.boot_type=2 gpt=1 androidboot.verifiedbootstate=<NULL> uboot_message=2018.05(11/06/2022-13:44:39) mbr_offset=1126400 disp_reserve=4096000,0x5df1a000 bootreason=unknow androidboot.dramsize=512 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 498540K/519920K available (6144K kernel code, 344K rwdata, 2276K rodata, 1024K init, 182K bss, 21380K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b56390 ( 345 kB) [ 0.000000] .bss : 0xc0b56390 - 0xc0b83ca4 ( 183 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sunxi_efuse_readn failed:-13 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000202] Console: colour dummy device 80x30 [ 0.000226] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000241] pid_max: default: 32768 minimum: 301 [ 0.000430] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000443] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000987] CPU: Testing write buffer coherency: ok [ 0.001486] Setting up static identity map for 0x40100000 - 0x40100058 [ 0.002999] devtmpfs: initialized [ 0.040325] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.040832] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.040856] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.041007] atomic64_test: passed [ 0.041018] pinctrl core: initialized pinctrl subsystem [ 0.042107] NET: Registered protocol family 16 [ 0.042837] DMA: preallocated 32 KiB pool for atomic coherent allocations [ 0.044130] dump_class_init,857, success [ 0.069451] cpuidle: using governor menu [ 0.070681] platform 2010000.iommu: iova_base: 0x48400000 [ 0.071161] sunxi iommu: irq = 22 [ 0.091361] sun8iw21p1-pinctrl pio: initialized sunXi PIO driver [ 0.093162] sunxi hwspinlock vbase:0xe0822000 [ 0.095060] iommu: Adding device npu to group 0 [ 0.096533] iommu: Adding device 1c0e000.ve to group 0 [ 0.111389] iommu: Adding device 5410000.g2d to group 0 [ 0.112215] iommu: Adding device 5000000.disp to group 0 [ 0.121860] iommu: Adding device 5908000.tdm to group 0 [ 0.122509] iommu: Adding device 5900000.isp to group 0 [ 0.123148] iommu: Adding device 58ffffc.isp to group 0 [ 0.124083] iommu: Adding device 58ffff8.isp to group 0 [ 0.124901] iommu: Adding device 58ffff4.isp to group 0 [ 0.125317] iommu: Adding device 5800800.vind:isp@4 to group 0 [ 0.126091] iommu: Adding device 5910000.scaler to group 0 [ 0.126518] iommu: Adding device 590fffc.scaler to group 0 [ 0.126927] iommu: Adding device 590fff8.scaler to group 0 [ 0.127497] iommu: Adding device 590fff4.scaler to group 0 [ 0.128165] iommu: Adding device 5910400.scaler to group 0 [ 0.128815] iommu: Adding device 59103fc.scaler to group 0 [ 0.129241] iommu: Adding device 59103f8.scaler to group 0 [ 0.130115] iommu: Adding device 59103f4.scaler to group 0 [ 0.130783] iommu: Adding device 5910800.scaler to group 0 [ 0.131393] iommu: Adding device 59107fc.scaler to group 0 [ 0.131797] iommu: Adding device 59107f8.scaler to group 0 [ 0.132308] iommu: Adding device 59107f4.scaler to group 0 [ 0.133090] iommu: Adding device 5910c00.scaler to group 0 [ 0.133697] iommu: Adding device 5910bfc.scaler to group 0 [ 0.134228] iommu: Adding device 5910bf8.scaler to group 0 [ 0.134635] iommu: Adding device 5910bf4.scaler to group 0 [ 0.136093] iommu: Adding device vinc0 to group 0 [ 0.136944] iommu: Adding device vinc4 to group 0 [ 0.137858] iommu: Adding device vinc8 to group 0 [ 0.138661] iommu: Adding device vinc12 to group 0 [ 0.184209] pwm module init! [ 0.188784] sunxi-pm debug v3.10 [ 0.193134] SCSI subsystem initialized [ 0.193856] usbcore: registered new interface driver usbfs [ 0.194040] usbcore: registered new interface driver hub [ 0.194209] usbcore: registered new device driver usb [ 0.194489] sunxi_i2c_adap_init()2748 - init [ 0.194949] sunxi_i2c_probe()2443 - [i2c0] twi_drv_used = 0 [ 0.194965] sunxi_i2c_probe()2450 - [i2c0] twi_pkt_interval = 0 [ 0.195041] twi_regulator_request()647 - [i2c0] regulator not found(isn't configured in dts)! [ 0.195052] twi_request_gpio()463 - [i2c0] init name: (null) [ 0.195899] sunxi_i2c_probe()2443 - [i2c1] twi_drv_used = 0 [ 0.195918] sunxi_i2c_probe()2450 - [i2c1] twi_pkt_interval = 0 [ 0.195995] twi_regulator_request()647 - [i2c1] regulator not found(isn't configured in dts)! [ 0.196006] twi_request_gpio()463 - [i2c1] init name: (null) [ 0.197442] sunxi_i2c_probe()2443 - [i2c2] twi_drv_used = 0 [ 0.197460] sunxi_i2c_probe()2450 - [i2c2] twi_pkt_interval = 0 [ 0.197537] twi_regulator_request()647 - [i2c2] regulator not found(isn't configured in dts)! [ 0.197547] twi_request_gpio()463 - [i2c2] init name: (null) [ 0.199328] sunxi_i2c_probe()2443 - [i2c3] twi_drv_used = 0 [ 0.199346] sunxi_i2c_probe()2450 - [i2c3] twi_pkt_interval = 0 [ 0.199427] twi_regulator_request()647 - [i2c3] regulator not found(isn't configured in dts)! [ 0.199437] twi_request_gpio()463 - [i2c3] init name: (null) [ 0.201081] sunxi_i2c_probe()2443 - [i2c4] twi_drv_used = 0 [ 0.201101] sunxi_i2c_probe()2450 - [i2c4] twi_pkt_interval = 0 [ 0.201181] twi_regulator_request()647 - [i2c4] regulator not found(isn't configured in dts)! [ 0.201192] twi_request_gpio()463 - [i2c4] init name: (null) [ 0.202340] axp20x-i2c 4-0034: AXP20x variant AXP2101 found [ 0.219314] random: fast init done [ 0.232014] axp20x-i2c 4-0034: AXP20X driver loaded [ 0.232526] media: Linux media interface: v0.10 [ 0.232676] Linux video capture interface: v2.00 [ 0.235855] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000 [ 0.236176] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000 [ 0.237403] Advanced Linux Sound Architecture Driver Initialized. [ 0.238295] Bluetooth: Core ver 2.22 [ 0.238440] NET: Registered protocol family 31 [ 0.238451] Bluetooth: HCI device and connection manager initialized [ 0.238472] Bluetooth: HCI socket layer initialized [ 0.238486] Bluetooth: L2CAP socket layer initialized [ 0.238526] Bluetooth: SCO socket layer initialized [ 0.241818] G2D: rcq version initialized.major:251 [ 0.243578] clocksource: Switched to clocksource arch_sys_counter [ 0.272135] udc_init,0 [ 0.273293] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.274043] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 0.274222] NET: Registered protocol family 2 [ 0.293874] TCP established hash table entries: 16 (order: -6, 64 bytes) [ 0.293892] TCP bind hash table entries: 16 (order: -6, 64 bytes) [ 0.293902] TCP: Hash tables configured (established 16 bind 16) [ 0.293965] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.293984] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.294200] NET: Registered protocol family 1 [ 0.298714] sunxi_sid_driver_init+0x0/0x10 complete comp. [ 0.299634] workingset: timestamp_bits=29 max_order=17 bucket_order=0 [ 0.316078] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.320162] io scheduler noop registered [ 0.320178] io scheduler deadline registered [ 0.320451] io scheduler cfq registered (default) [ 0.321697] [DISP]disp_module_init [ 0.323174] [DISP] disp_init,line:2340: [ 0.323189] smooth display screen:0 type:1 mode:4 [ 0.360936] lcd 0, driver_name t050k589, panel_name default_lcd [ 0.360953] lcd 0, driver_name t050k589, panel_name t050k589 [ 0.360972] lcd 0, driver_name t050k589, panel_name icn6202 [ 0.360981] lcd 0, driver_name t050k589, panel_name super_lcd_driver [ 0.361113] display_fb_request,fb_id:0 [ 0.370211] [DISP] de_fcm_set_para,line:491: [ 0.370225] fcm lut 0 not find, auto retry after init [ 0.371447] [DISP]disp_module_init finish [ 0.374243] [DISP] de_fcm_set_para,line:491: [ 0.374257] fcm lut 0 not find, auto retry after init [ 0.374280] [DISP] de_fcm_set_para,line:491: [ 0.374286] fcm lut 0 not find, auto retry after init [ 0.374356] [DISP] lcd_clk_config,line:699: [ 0.374370] disp 0, clk: pll(360000000),clk(360000000),dclk(60000000) dsi_rate(60000000) [ 0.374370] clk real:pll(360000000),clk(360000000),dclk(90000000) dsi_rate(150000000) [ 0.380892] Freeing logo buffer memory: 4000K [ 0.381014] uart0: ttyS0 at MMIO 0x2500000 (irq = 289, base_baud = 1500000) is a SUNXI [ 0.381042] sw_console_setup()2050 - console setup baud 115200 parity n bits 8, flow n [ 1.601206] console [ttyS0] enabled [ 1.606664] uart2: ttyS2 at MMIO 0x2500800 (irq = 290, base_baud = 1500000) is a SUNXI [ 1.617071] misc dump reg init [ 1.621317] npu[1][1] vipcore, platform driver device=0xdf5a5410 [ 1.628425] npu[1][1] vipcore irq number is 291. [ 1.633693] gckvip_drv_adjust_param 232 SUCCESS [ 1.638847] Want set pclk rate(492000000) support(492000000) real(492000000) [ 1.646967] Want set mclk rate(492000000) support(492000000) real(492000000) [ 1.654937] npu[1][1] This device support 64bits DMA [ 1.661007] npu[1][1] core_0, request irqline=291, name=vipcore_0 [ 1.668130] npu[1][1] =======vipcore parameter===== [ 1.673703] npu[1][1] registerMemBase 0x03050000, [ 1.679475] npu[1][1] registerMemSize 0x00020000, [ 1.685281] npu[1][1] irqLine 0x00000123, [ 1.691064] npu[1][1] contiguousSize 0x00100000 [ 1.696712] npu[1][1] contiguousBase 0x30000000 [ 1.702286] npu[1][1] vipContiguousBase 0x0 [ 1.707228] npu[1][1] drvType 0x00000000 [ 1.712805] npu[1][1] AXISramSize 0x00000000 [ 1.718407] npu[1][1] AXISramBaseAddress 0x00000000 [ 1.724004] npu[1][1] VIPSramSize 0x00020000 [ 1.729580] npu[1][1] VIPSramBaseAddress 0x00400000 [ 1.735167] npu[1][1] sysHeapSize 0x00200000 [ 1.740750] npu[1][1] =============================== [ 1.746506] npu[1][1] VIPLite driver version 1.8.1.0-AW-2022-07-26 [ 1.754318] sunxi-bt soc@03000000:bt: bt_power_num (0) [ 1.760133] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. [ 1.766842] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) [ 1.773675] sunxi-bt soc@03000000:bt: request pincrtl handle for device [soc@03000000:bt] failed [ 1.783633] sunxi-bt soc@03000000:bt: bt_rst gpio=136 mul-sel=5 pull=1 drv_level=2 data=0 [ 1.793256] sunxi-bt soc@03000000:bt: clk_name () [ 1.798627] sunxi-bt soc@03000000:bt: clk not config [ 1.805131] sun8iw21p1-pinctrl pio: expect_func as:fanout0, but muxsel(3) is func:clk [ 1.814318] sunxi-wlan soc@03000000:wlan@0: wlan_busnum (1) [ 1.820586] sunxi-wlan soc@03000000:wlan@0: wlan power voltage (3300000) [ 1.828210] sunxi-wlan soc@03000000:wlan@0: wlan io voltage (3300000) [ 1.835486] sunxi-wlan soc@03000000:wlan@0: wlan_power_num (1) [ 1.842059] sunxi-wlan soc@03000000:wlan@0: wlan_power_name (axp2101-dcdc1) [ 1.849964] sunxi-wlan soc@03000000:wlan@0: io_regulator_name (axp2101-dcdc1) [ 1.858077] sunxi-wlan soc@03000000:wlan@0: wlan_regon gpio=239 mul-sel=1 pull=1 drv_level=2 data=0 [ 1.868696] sunxi-wlan soc@03000000:wlan@0: get gpio chip_en failed [ 1.875786] sunxi-wlan soc@03000000:wlan@0: wlan_hostwake gpio=199 mul-sel=14 pull=1 drv_level=2 data=0 [ 1.886852] sunxi-wlan soc@03000000:wlan@0: clk_name () [ 1.894276] libphy: Fixed MDIO Bus: probed [ 1.899725] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.907570] get ehci0-controller, regulator_io is no nocare [ 1.913904] get ehci0-controller wakeup-source is fail. [ 1.919929] sunxi ehci0-controller don't init wakeup source [ 1.926361] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b76ac8, 0x:e0848000, irq_no:137 [ 1.938560] [sunxi-ehci0]: Not init ehci0 [ 1.943551] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.951067] get ohci0-controller, regulator_io is no nocare [ 1.957426] get ohci0-controller wakeup-source is fail. [ 1.963454] sunxi ohci0-controller don't init wakeup source [ 1.969862] [sunxi-ohci0]: probe, pdev->name: 4101000.ohci0-controller, sunxi_ohci: 0xc0b76cec [ 1.979634] [sunxi-ohci0]: Not init ohci0 [ 1.984817] usbcore: registered new interface driver uas [ 1.991221] usbcore: registered new interface driver usb-storage [ 1.998209] usbcore: registered new interface driver ums-alauda [ 2.005178] usbcore: registered new interface driver ums-cypress [ 2.012176] usbcore: registered new interface driver ums-datafab [ 2.019202] usbcore: registered new interface driver ums_eneub6250 [ 2.026503] usbcore: registered new interface driver ums-freecom [ 2.033487] usbcore: registered new interface driver ums-isd200 [ 2.040388] usbcore: registered new interface driver ums-jumpshot [ 2.047520] usbcore: registered new interface driver ums-karma [ 2.054456] usbcore: registered new interface driver ums-onetouch [ 2.061577] usbcore: registered new interface driver ums-realtek [ 2.068571] usbcore: registered new interface driver ums-sddr09 [ 2.075560] usbcore: registered new interface driver ums-sddr55 [ 2.082462] usbcore: registered new interface driver ums-usbat [ 2.089270] usb_serial_number:20080411 [ 2.093991] [GOODIX 9XX INFO] LINE:0122-->goodix_reset:reset the tp !!!!!! [ 2.203766] sunxi_i2c_do_xfer()1968 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x5d) [ 2.213163] Goodix-TS 2-005d: read version failed: -70 [ 2.218954] Goodix-TS 2-005d: Read version failed. [ 2.224408] Goodix-TS: probe of 2-005d failed with error -70 [ 2.231094] ERROR! get ctp_para failed, func:sunxi_ctp_startup, line:46 [ 2.238708] =========script_get_item_err============ [ 2.251104] input: axp2101-pek as /devices/platform/soc/twi4/i2c-4/4-0034/axp2101-pek.0/input/input0 [ 2.263314] input: sunxi-wiegand0 as /devices/virtual/input/input1 [ 2.271671] sunxi_gpadc_init,1949, success [ 2.276966] sunxi_gpadc_setup: get channel scan data failed [ 2.284420] input: sunxi-gpadc0 as /devices/virtual/input/input2 [ 2.293343] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 [ 2.300604] sunxi-rtc rtc: RTC enabled [ 2.304998] fix to hot reboot, save boot reason [ 2.310486] i2c /dev entries driver [ 2.316150] sunxi cedar version 0.1 [ 2.320400] VE: install start!!! [ 2.320400] [ 2.326277] VE: cedar-ve the get irq is 292 [ 2.331073] VE: regs_csi = e0883000 [ 2.335678] VE: ve_proc_mgr: flag = 1 [ 2.335678] [ 2.341491] VE: install end!!! [ 2.341491] [ 2.347287] google_vp9: sunxi google vp9 version 0.1 [ 2.356923] axp2101_charger: read chipid = 4a [ 2.356923] [ 2.370853] thermal thermal_zone3: power_allocator: sustainable_power will be estimated [ 2.402968] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.412717] Bluetooth: HCI UART driver ver 2.2.d448471.20181218-163903 [ 2.420515] Bluetooth: HCI UART protocol H4 registered [ 2.426907] Bluetooth: HCI H4 protocol initialized [ 2.433018] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 01.00.07 [ 2.441787] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1 [ 2.448248] axp2101_charger: the gauge have been reset, need to reload param [ 2.448248] [ 2.458247] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 0 [ 2.464846] [XR_BT_LPM] bluesleep_probe: uart_index(2) [ 2.471608] bt_fdi debugfs_init [ 2.514259] cpuidle: enable-method property 'psci' found operations [ 2.523691] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 2.532628] sunxi-mmc sdc2: ***ctl-spec-caps*** 308 [ 2.539170] sunxi-mmc sdc2: No vdmmc regulator found [ 2.544857] sunxi-mmc sdc2: No vd33sw regulator found [ 2.550519] sunxi-mmc sdc2: No vd18sw regulator found [ 2.556266] sunxi-mmc sdc2: No vq33sw regulator found [ 2.561926] sunxi-mmc sdc2: No vq18sw regulator found [ 2.568013] sunxi-mmc sdc2: set host busy [ 2.572588] mmc:failed to get gpios [ 2.576853] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.613622] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.653608] sunxi-mmc sdc2: detmode:alway in(non removable) [ 2.653633] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.661992] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.663055] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.673893] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.673959] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.686791] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.731453] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 2.740422] sunxi-mmc sdc0: ***ctl-spec-caps*** 408 [ 2.747671] sunxi-mmc sdc0: No vqmmc regulator found [ 2.753261] sunxi-mmc sdc0: No vdmmc regulator found [ 2.759362] sunxi-mmc sdc0: set host busy [ 2.763967] sunxi-mmc sdc0: Got CD GPIO [ 2.768678] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.814825] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.838706] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing MMC-HS(SDR20) dt B [ 2.849888] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 1 timing MMC-HS(SDR20) dt B [ 2.861054] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 8 timing MMC-HS(SDR20) dt B [ 2.872239] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 8 timing MMC-DDR52 dt B [ 2.883194] mmc0: new DDR MMC card at address 0001 [ 2.889421] mmcblk0: mmc0:0001 AT2S38 7.23 GiB [ 2.894852] mmcblk0boot0: mmc0:0001 AT2S38 partition 1 4.00 MiB [ 2.901798] mmcblk0boot1: mmc0:0001 AT2S38 partition 2 4.00 MiB [ 2.909103] mmcblk0rpmb: mmc0:0001 AT2S38 partition 3 4.00 MiB [ 2.918329] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 3.023688] sunxi-mmc sdc0: no vqmmc,Check if there is regulator [ 3.053595] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 3.093777] sunxi-mmc sdc0: detmode:gpio irq [ 3.099060] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 3.108014] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 [ 3.113353] sunxi-mmc sdc1: No vmmc regulator found [ 3.118865] sunxi-mmc sdc1: No vqmmc regulator found [ 3.124441] sunxi-mmc sdc1: No vdmmc regulator found [ 3.130003] sunxi-mmc sdc1: No vd33sw regulator found [ 3.135680] sunxi-mmc sdc1: No vd18sw regulator found [ 3.141338] sunxi-mmc sdc1: No vq33sw regulator found [ 3.147008] sunxi-mmc sdc1: No vq18sw regulator found [ 3.153061] sunxi-mmc sdc1: set host busy [ 3.157652] mmc:failed to get gpios [ 3.161846] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.193622] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.233606] sunxi-mmc sdc1: detmode:manually by software [ 3.239597] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.245588] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.245608] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.253675] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.265490] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.276261] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.282131] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.288016] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.288034] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.289105] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.311166] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.321497] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.344058] usbcore: registered new interface driver usbhid [ 3.350326] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.356577] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.356616] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.364757] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.376604] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.387439] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.393345] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.399228] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.399259] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.400336] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.432659] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.443956] usbhid: USB HID core driver [ 3.451431] [sound 1158][DAUDIO snd_sunxi_regulator_init] regulator missing or invalid [ 3.462000] sunxi-snd-mach soc@03000000:codec_mach: sunxi-snd-codec <-> soc@03000000:codec_plat mapping ok [ 3.462014] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.480512] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.486578] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.498570] sunxi-snd-mach soc@03000000:daudio0_mach: snd-soc-dummy-dai <-> 2032000.daudio0_plat mapping ok [ 3.499873] Netfilter messages via NETLINK v0.30. [ 3.500107] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 3.500250] ctnetlink v0.93: registering with nfnetlink. [ 3.500560] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.501316] NET: Registered protocol family 10 [ 3.502568] NET: Registered protocol family 17 [ 3.502600] NET: Registered protocol family 15 [ 3.503275] Bluetooth: RFCOMM TTY layer initialized [ 3.503295] Bluetooth: RFCOMM socket layer initialized [ 3.503316] Bluetooth: RFCOMM ver 1.11 [ 3.504516] Registering SWP/SWPB emulation handler [ 3.585462] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.596660] sunxi-rtc rtc: setting system clock to 1970-01-01 00:19:11 UTC (1151) [ 3.597390] clk: Not disabling unused clocks [ 3.597511] usb-vbus: disabling [ 3.597800] axp2101-dcdc2: disabling [ 3.615229] axp2101-rtcldo1: disabling [ 3.623670] axp2101-aldo2: disabling [ 3.628341] axp2101-aldo3: disabling [ 3.633047] axp2101-aldo4: disabling [ 3.637088] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.642987] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.648869] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.654777] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.654799] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.655883] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.683031] axp2101-bldo2: disabling [ 3.687068] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.698663] axp2101-dldo1: disabling [ 3.703346] axp2101-dldo2: disabling [ 3.708040] axp2101-cpusldo: disabling [ 3.712704] ALSA device list: [ 3.716059] #0: audiocodec [ 3.719292] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.725275] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.725293] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.733419] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.745297] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.756078] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.761949] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.767841] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.767859] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.790920] #1: snddaudio0 [ 3.809602] VFS: Mounted root (squashfs filesystem) readonly on device 179:4. [ 3.819111] devtmpfs: mounted [ 3.824228] Freeing unused kernel memory: 1024K mount: mounting none on /dev failed: Resource busy [ 4.021007] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! [ 4.033950] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal starting pid 842, tty '': '/etc/preinit' can't run '/etc/preinit': No such file or directory starting pid 843, tty '': '/bin/mount -t proc proc /proc' mount: mounting proc on /proc failed: Resource busy starting pid 844, tty '': '/bin/mount -t tmpfs tmpfs /run' starting pid 845, tty '': '/bin/mount -o remount,rw /' starting pid 846, tty '': '/bin/mkdir -p /dev/pts' starting pid 847, tty '': '/bin/mkdir -p /dev/shm' starting pid 848, tty '': '/bin/mount -a' starting pid 849, tty '': '/bin/hostname -F /etc/hostname' hostname: can't open '/etc/hostname': No such file or directory starting pid 850, tty '': '/etc/init.d/rcS boot' ------run rc.preboot file----- [ 4.165805] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) ------run rc.modules file----- [ 4.224891] ======== XRADIO WIFI OPEN ======== [ 4.229910] [XRADIO] Driver Label:XR_V02.16.91 _HT40_01.33 Oct 28 2022 04:26:30 [ 4.238385] [XRADIO] Allocated hw_priv @ dec44c80 [ 4.243895] [XRADIO_ERR] Access_file failed, path:/data/misc/wifi/xr_wifi.conf! [ 4.252792] sunxi-wlan soc@03000000:wlan@0: bus_index: 1 [ 4.260194] sunxi-wlan soc@03000000:wlan@0: check wlan wlan_power voltage: 3300000 [ 4.270094] sunxi-wlan soc@03000000:wlan@0: check wlan io_regulator voltage: 3300000 [ 4.388955] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.399226] [XRADIO] Detect SDIO card 1 [ 4.443627] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.484235] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.497453] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.518463] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 4.529185] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 4.540175] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B [ 4.551944] mmc2: new high speed SDIO card at address 0001 [ 4.558731] [SBUS] XRadio Device:sdio clk=50000000 [ 4.564926] [XRADIO] XRADIO_HW_REV 1.0 detected. [ 4.644079] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000. [ 4.683539] [XRADIO] Bootloader complete [ 4.771306] [XRADIO] Firmware completed. [ 4.777149] [WSM] Firmware Label:XR_C09.08.52.73_DBG_02.122 2GHZ HT40 May 18 2021 13:36:09 [ 4.794576] [XRADIO] Firmware Startup Done. [ 4.799566] [XRADIO_WRN] enable Multi-Rx! [ 4.818036] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ------run rc.final file----- Load mpp modules [ 4.894226] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL! [ 4.905102] [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL! [ 5.218464] [VIN_ERR]registering imx386_mipi_2, No such device! insmod: can't insert '/lib/modules/4.9.191/sunxi_aio.ko': No such file or directory insmod: can't insert '/lib/modules/4.9.191/sunxi_eise.ko': No such file or directory Starting logging: start-stop-daemon: unrecognized option: exec start-stop-daemon: unrecognized option: exec OK Starting audio: Successfully play boot music Populating /dev using udev: playing '/home/res/audio/startup.wav': 2 ch, 48000 hz, 16 bit [ 5.331372] udevd[974]: could not create /tmp/run/udev: No such file or directory done mkdir: can't create directory '/dev/pts': File exists mkdir: can't create directory '/dev/shm': File exists Initializing random number generator... [ 5.495538] random: dd: uninitialized urandom read (512 bytes read) done. Starting network: Failed to connect to ubus /sbin/ifup: line 51: /sbin/wifi: not found FAIL ifconfig: invalid hw-addr 00: udhcpc: SIOCGIFINDEX: No such device Starting telnetd: OK enable android usb insmod: can't insert '/lib/modules/4.9.191/sunxi_usb_udc.ko': No such file or directory insmod: can't insert '/lib/modules/4.9.191/sunxi_usbc.ko': No such file or directory [ 5.640487] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 5.663783] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) Unknown group "lp" in message bus configuration file [ 5.789382] file system registered [ 5.805364] configfs-gadget 4100000.udc-controller: failed to start g1: -19 sh: write error: No such device Starting wifi_deamon....: [ 5.820806] read descriptors [ 5.827793] read strings 1970-01-01 00:19:13:767: WMG_INFO [wifi_deamon.c:main:1076]: debug log level is: 3 1970-01-01 00:19:13:767: WMG_INFO [wifi_deamon.c:main:1078]: now set to debug level: 6 [ACT D][ring_buff_init,27]enter [ACT D][ring_buff_start,173]ring buffer start enter [ACT D][ring_buff_start,187]ring buffer start quit [ 7.163600] [ 7.163600] insmod_device_driver [ 7.163600] [ 7.412696] android_work: sent uevent USB_STATE=CONNECTED [ 7.508896] configfs-gadget gadget: high-speed config #1: c [ 7.515250] android_work: sent uevent USB_STATE=CONFIGURED Close IRCUT........1970-01-01 00:19:15:777: WMG_DEBUG [wifi_deamon.c:cmd_handle_thread:961]: get cmd: o sta 1970-01-01 00:19:15:777: WMG_DEBUG [wifi_deamon.c:cmd_handle_o:259]: cmd handle o: sta 1970-01-01 00:19:15:777: WMG_INFO [wifi_deamon.c:cmd_handle_o:261]: open sta mode 1970-01-01 00:19:15:777: WMG_INFO [src/wmg_sta.c:sta_mode_init:363]: sta mode init now 1970-01-01 00:19:15:777: WMG_INFO [src/os/linux/linux_wpa.c:linux_supplicant_init:1436]: linux supplicant init now 1970-01-01 00:19:15:777: WMG_INFO [src/wmg_ap.c:ap_mode_init:216]: ap mode init now 1970-01-01 00:19:15:777: WMG_INFO [src/os/linux/linux_hapd.c:linux_ap_hapd_init:754]: linux host[ 7.933245] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. apd init now 1970-01-01 00:19:15:777: WMG_INFO [src/wmg_monitor.c:monitor_mode_init:206]: monitor mode init now 1970-01-01 00:19:15:777: WMG_INFO [src/os/linux/linux_nl.c:linux_monitor_nl_init:250]: linux monitor nl init now 1970-01-01 00:19:15:778: WMG_DEBUG [src/os/linux/linux_nl.c:linux_monitor_nl_init:255]: nl80211 init success 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_init:837]: wifi_manager initialize, version: 2.0.1 Copyright (c) 2019-2025 Allwinner Technology Co., Ltd. ALL rights reserved 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:950]: switch wifi mode from current_mode 'unknown' to new_mode 'station' 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:954]: switch_mode_bitmap:0x1 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:955]: current_mode_bitmap:0x0 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:958]: disable_mode_bitmap:0x0 1970-01-01 00:19:15:778: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:988]: enable_mode_bitmap:0x1 1970-01-01 00:19:15:778: WMG_DUMP [src/wmg_sta.c:sta_mode_enable:412]: wifi station enabling... /etc/init.d/rcS: /etc/init.d/rc.final: line 36: powerkey_daemon: not found 1970-01-01 00:19:15:822: WMG_EXCESSIVE [src/os/linux/utils.c:check_process_is_exist:32]: hostapd not exist Trying to connect to SWUpdate... 1970-01-01 00:19:15:875: WMG_EXCESSIVE [[ 8.073731] urandom_read: 2 callbacks suppressed src/os/linux/utils.c:check_proce[ 8.073737] random: wpa_supplicant: uninitialized urandom read (3 bytes read) ss_is_exist:32]: wpa_supplicant [ 8.090470] random: wpa_supplicant: uninitialized urandom read (1024 bytes read) not exist 1970-01-01 00:19:15:875: WMG_DEBUG [src/os/linux/linux_wpa.c:linux_connect_to_supplicant:1519]: wpa_supplicant is not running, need to start it mount: mounting /dev/mmcblk1p1 on /mnt/sdcard failed: No such file or directory starting pid 1089, tty '/dev/console': '-/bin/sh' BusyBox v1.27.2 () built-in shell (ash) ------run profile file----- _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| [ 8.148365] ieee80211_do_open: vif_type=2, p2p=0, ch=3, addr=84:2b:9f:30:6b:c8 |_| |_||_|_||_|_| Tina is B[ 8.156879] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0, addr=84:2b:9f:30:6b:c8 ased on OpenWrt! ---------------------------------------------- Tina Linux (Neptune, 5C1C9C5[ 8.175768] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined. 3) ---------------------------------------------- swu_param: #### swu_software: #### swu_mode: #### no swupdate_cmd to run, wait for next swupdate root@TinaLinux:/# Successfully initial[ 8.198990] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ized wpa_supplicant [ 8.240910] random: wpa_supplicant: uninitialized urandom read (3 bytes read) 1
重启后, 看我发现了啥!
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
只能烧录一次, 再次烧写提示失败.
key_count=1 ^^^^^^^^^^^^^^^^^^^ key index=0 key name=rotpk key type=0 key len=32 key if_burn=1 key if_replace=1 key if_crypt=0 ################### offset=116 ready to burn rootkey SUNXI_USB_SEND_DATA=68 usb command = 1 recv_size=404 5e4020c0: 2d79656b 756f7267 62642d70 00000000 key-group-db.... 5e4020d0: 00000000 00000000 00000000 00000000 ................ 5e4020e0: 00000000 00000000 00000000 00000000 ................ 5e4020f0: 00000000 00000000 00000000 00000000 ................ 5e402100: 00000000 00000000 00000000 00000000 ................ 5e402110: 00000000 00000000 00000000 00000000 ................ 5e402120: 00000000 00000000 00000000 00000000 ................ 5e402130: 00000000 00000000 00000000 00000000 ................ 5e402140: 00000000 00000000 00000000 00000000 ................ 5e402150: 00000000 00000000 00000000 00000000 ................ 5e402160: 00000000 00000000 00000000 00000000 ................ 5e402170: 00000000 00000000 00000000 00000000 ................ 5e402180: 00000000 00000000 00000000 00000000 ................ 5e402190: 00000000 00000000 00000000 00000000 ................ 5e4021a0: 00000000 00000000 00000000 00000000 ................ 5e4021b0: 00000000 00000000 00000000 00000000 ................ 5e4021c0: 00000000 00000000 00000000 00000000 ................ 5e4021d0: 00000001 00000000 00000000 00000000 ................ 5e4021e0: 70746f72 0000006b f5b0e100 032f74e0 rotpk........t/. 5e4021f0: 032fcb60 00000000 00000000 01580000 `./...........X. 5e402200: 00000002 00000000 00000005 01580000 ..............X. 5e402210: 015801cc 00000000 00000020 01580954 ..X..... ...T.X. 5e402220: 00000000 00000020 00000001 00000001 .... ........... 5e402230: 00000000 c7d178a3 3004bf9c 3c10b6ad .....x.....0...< 5e402240: 28c9db2c 4a834387 64ab7659 e23f85b8 ,..(.C.JYv.d..?. 5e402250: e52551c5 00000000 00000000 00000000 .Q%............. usb command = 2 recv_size=404 5e4020c0: 2d79656b 756f7267 62642d70 00000000 key-group-db.... 5e4020d0: 00000000 00000000 00000000 00000000 ................ 5e4020e0: 00000000 00000000 00000000 00000000 ................ 5e4020f0: 00000000 00000000 00000000 00000000 ................ 5e402100: 00000000 00000000 00000000 00000000 ................ 5e402110: 00000000 00000000 00000000 00000000 ................ 5e402120: 00000000 00000000 00000000 00000000 ................ 5e402130: 00000000 00000000 00000000 00000000 ................ 5e402140: 00000000 00000000 00000000 00000000 ................ 5e402150: 00000000 00000000 00000000 00000000 ................ 5e402160: 00000000 00000000 00000000 00000000 ................ 5e402170: 00000000 00000000 00000000 00000000 ................ 5e402180: 00000000 00000000 00000000 00000000 ................ 5e402190: 00000000 00000000 00000000 00000000 ................ 5e4021a0: 00000000 00000000 00000000 00000000 ................ 5e4021b0: 00000000 00000000 00000000 00000000 ................ 5e4021c0: 00000000 00000000 00000000 00000000 ................ 5e4021d0: 00000001 00000000 00000000 00000000 ................ 5e4021e0: 70746f72 0000006b f5b0e100 032f74e0 rotpk........t/. 5e4021f0: 032fcb60 00000000 00000000 01580000 `./...........X. 5e402200: 00000002 00000000 00000005 01580000 ..............X. 5e402210: 015801cc 00000000 00000020 01580954 ..X..... ...T.X. 5e402220: 00000000 00000020 00000001 00000001 .... ........... 5e402230: 00000000 c7d178a3 3004bf9c 3c10b6ad .....x.....0...< 5e402240: 28c9db2c 4a834387 64ab7659 e23f85b8 ,..(.C.JYv.d..?. 5e402250: e52551c5 00000000 00000000 00000000 .Q%............. key_count=1 [214.895]Item0 (Map) magic is bad [214.898]the secure storage item0 copy0 magic is bad [214.915]Item0 (Map) magic is bad [214.918]the secure storage item0 copy1 magic is bad [214.922]Item0 (Map) magic is bad ^^^^^^^^^^^^^^^^^^^ key index=0 key name=rotpk key type=0 key len=32 key if_burn=1 key if_replace=1 key if_crypt=0 ################### offset=116 ready to burn rootkey sunxi_efuse_write failed with:-5 SUNXI_USB_SEND_DATA=68
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
往V853开发板烧录一个与eMMC不同的rotpk.bin密钥,dragonsn提示:
rotpk = 044A6C54E23C53A08F7F1ABEF1B6C876A1BCA8BA409505A6370AED19F2B9ECD1
正在烧写Key...
烧写失败Key, 请重新尝试
烧录FAIL
往V853开发板烧录一个与eMMC相同的rotpk.bin密钥,dragonsn提示:rotpk = A378D1C79CBF0430ADB6103C2CDBC9288743834A5976AB64B8853FE2C55125E5
正在烧写Key...
烧录OK
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
V853 SID 相关寄存器配置：./lichee/brandy-2.0/u-boot-2018/arch/arm/include/asm/arch-sunxi/sid_sun8iw21.h
/* * (C) Copyright 2013-2016 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> * * wangwei <wangwei@allwinnertech.com> * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __SID_H__ #define __SID_H__ #include <linux/types.h> #include <asm/arch/cpu.h> #define SID_PRCTL (SUNXI_SID_BASE + 0x40) #define SID_PRKEY (SUNXI_SID_BASE + 0x50) #define SID_RDKEY (SUNXI_SID_BASE + 0x60) #define SJTAG_AT0 (SUNXI_SID_BASE + 0x80) #define SJTAG_AT1 (SUNXI_SID_BASE + 0x84) #define SJTAG_S (SUNXI_SID_BASE + 0x88) #define SID_ROTPK_VALUE(n) (SUNXI_SID_BASE + 0x120 + (n * 4)) #define SID_ROTPK_CTRL (SUNXI_SID_BASE + 0x140) #define SID_ROTPK_EFUSED_BIT (1) #define SID_ROTPK_CMP_RET_BIT (0) #define SID_EFUSE (SUNXI_SID_BASE + 0x200) #define SID_SECURE_MODE (SUNXI_SID_BASE + 0xA0) #define SID_OP_LOCK (0xAC) #define EFUSE_CHIPID (0x0) #define EFUSE_ROTPK (0xA8) /* write protect */ #define EFUSE_WRITE_PROTECT (0x38) /* read protect */ #define EFUSE_READ_PROTECT (0x3c) /* jtag security */ #define EFUSE_LCJS (0x40) /*efuse power ctl*/ #define EFUSE_HV_SWITCH (SUNXI_RTC_BASE + 0x204) #endif /* #ifndef __SID_H__ */根据V853手册,查得SID基址0x0300 6000
用uboot读出未烧录加密芯片的SID寄存器值:
=> md.b 0x03006000 03006000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006090: 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $............... 030060a0: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 030060b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006200: 00 78 c0 62 20 48 00 2c 4c 04 43 01 4c 18 4a 48 .x.b H.,L.C.L.JH 03006210: 00 00 00 00 f0 30 98 86 a9 98 84 00 09 14 0c 10 .....0.......... 03006220: d0 0d 2e 13 00 82 20 00 10 15 6a 00 00 00 00 00 ...... ...j..... 03006230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................烧过加密芯片的:
=> md.b 0x03006000 03006000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006090: 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 $............... 030060a0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030060f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006120: a3 00 00 00 9c 00 00 00 ad 00 00 00 2c 00 00 00 ............,... 03006130: 87 00 00 00 59 00 00 00 b8 00 00 00 c5 00 00 00 ....Y........... 03006140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030061f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006200: 00 78 c0 62 20 48 00 2c 4c 04 43 01 cc 15 6c 50 .x.b H.,L.C...lP 03006210: 00 00 00 00 f5 d0 96 71 49 97 8d 00 19 13 d4 0f .......qI....... 03006220: bb 0d af 12 00 60 06 81 16 13 69 00 00 00 00 00 .....`....i..... 03006230: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006250: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006260: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006270: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030062f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006310: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006320: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006330: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006340: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006350: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006360: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006370: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006390: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030063f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006410: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006420: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006430: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006440: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006450: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006460: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006470: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006490: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030064f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030065f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006620: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006630: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006640: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006650: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006660: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006670: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006680: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 03006690: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 030066b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
可以看出,烧过加密固件, 0xA0偏移 也就是 SID_SECURE_MODE 和 SID_ROTPK_VALUE 值会改变.
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
[122]HELLO! SBOOT is starting! [125]sboot commit : 4b419f21ba [129]PMU: AXP21 [131]set pll start [133]periph0 has been enabled [136]set pll end [138]board init ok [140]rtc[0] value = 0x80000001 [143]DRAM use external ZQ!! [145]chip id check OK [148]DRAM_VCC set to 1500 mv [150]DRAM BOOT DRIVE INFO: V0.16 [153]DRAM CLK = 936 MHz [156]DRAM Type = 3 (2:DDR2,3:DDR3) [159]DRAMC ZQ value: 0x7b7bfb [162]DRAM ODT value: 0x42. [165]DRAM SIZE =512 M [167]dram_tpr4:0x0 [170]DRAM simple test OK. [173]rtc standby flag is 0x0, super standby flag is 0x0 [178]dram size =512 [180]audio:avcc calibration [182][mmc]: mmc driver ver 2021-12-27 10:07 [192][mmc]: Wrong media type 0x0, but host sdc2, try mmc first [198][mmc]: ***Try MMC card 2*** [213][mmc]: RMCA OK! [215][mmc]: bias 100 [217][mmc]: mmc 2 bias 100 [220][mmc]: MMC 5.1 [222][mmc]: HSSDR52/SDR25 8 bit [225][mmc]: 50000000 Hz [227][mmc]: 7400 MB [229][mmc]: ***SD/MMC 2 init OK!!!*** [293]read toc1 from emmc 32800 sector [297]OLD version: 0.0 [299]NEW version: 0.0 [302]don't have rotpk, skip check [367]load rotpk hash [429]load boot-key hash [431]load boot hash [563]monitor entry=0x0 [565]uboot entry=0x43000000 [568]optee entry=0x41980000 [570]opensbi entry=0x0 [573]no need rotpk flag [575]tunning data addr:0x430003e8 [578]drm_region_size is 0 [580]run out of boot0 M/TC: OP-TEE version: 15ee1539b (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Tue Mar 29 06:48:41 UTC 2022 arm U-Boot 2018.05 (Nov 06 2022 - 13:44:39 +0800) Allwinner Technology [00.762]CPU: Allwinner Family [00.765]Model: sun8iw21 I2C: ready [00.792]DRAM: 512 MiB [00.795]Relocation Offset is: 1ced0000 [00.820]secure enable bit: 1 E/TC:0 fdt_getprop_u32:343 prop trace_level not found [00.835]PMU: AXP21 [00.837]BMU: AXP21 FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL bias_name:pc_bias bias_vol:1800 bias_name:pi_bias bias_vol:1800 [00.860]CPU=900 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=24Mhz MBus=300Mhz [00.866]gic: sec monitor mode sunxi flash map init [00.871]flash init start [00.873]workmode = 0,storage type = 2 [00.877][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [00.882][mmc]: get sdc_type fail and use default host:tm4. [00.889][mmc]: SUNXI SDMMC Controller Version:0x50400 [00.917][mmc]: Best spd md: 2-HSDDR52/DDR50, freq: 2-50000000, Bus width: 8 [00.924]sunxi flash init ok [00.939]line:724 init_clocks [00.942]drv_disp_init request pwm success, pwm9:pwm9:0x2000c00. [00.956]drv_disp_init finish [00.960]Loading Environment from SUNXI_FLASH... OK [00.971]boot_gui_init:start [00.974]set disp.dev2_output_type fail. using defval=0 [00.979][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [00.984][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [00.988][ICN6202 TO LVDS] LINE:0167-->lcd_power_on: [01.006]boot_gui_init:finish partno erro : can't find partition bootloader 54 bytes read in 0 ms [01.015]bmp_name=bootlogo.bmp size 38454 [01.019][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.024][ICN6202 TO LVDS] LINE:0575-->lcd_panel_init: [01.190][ICN6202 TO LVDS] LINE:0620-->lcd_panel_init:initialization:icn6202 init reg from mipi 38454 bytes read in 192 ms (195.3 KiB/s) [01.230]Item0 (Map) magic is bad [01.233]the secure storage item0 copy0 magic is bad [01.250]Item0 (Map) magic is bad [01.253]the secure storage item0 copy1 magic is bad [01.258]Item0 (Map) magic is bad [01.261]out of usb burn from boot: not need burn key root_partition is rootfs set root to /dev/mmcblk0p4 [01.270]update part info [01.273]update bootcmd [01.275]change working_fdt 0x5de8fe70 to 0x5de6fe70 [01.282][mmc]: delete mmc-hs400-1_8v from dtb [01.286][mmc]: delete mmc-hs200-1_8v from dtb [01.290][mmc]: get max-frequency ok 50000000 Hz disable nand error: FDT_ERR_BADPATH [01.304]The storage not support sample function [01.310]## error: update_fdt_dram_para : FDT_ERR_NOTFOUND [01.318][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.324]update dts [01.328][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.332][ICN6202 TO LVDS] LINE:0203-->lcd_bl_open: [01.340][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.344][ICN6202 TO LVDS] LINE:0146-->lcd_open_flow: [01.349]LCD open finish Hit any key to stop autoboot: 0 pubkey boot valid [02.497]no vendor_boot partition is found Android's image name: v853-vision [02.546]Starting kernel ... [02.549][mmc]: mmc exit start [02.567][mmc]: mmc 2 exit ok [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.191 (whycan@ubuntu) (gcc version 6.4.1 (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) ) #20 PREEMPT Sun Nov 6 05:54:56 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt:Machine model: sun8iw21 [ 0.000000] ion_mem_reserve: err format for ion reserve list! [ 0.000000] disp reserve base 0x5df1a000 ,size 0x3e8000 [ 0.000000] Reserved memory: created DMA memory pool at 0x47bc0000, size 0 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@0x47BC0000, compatible id shared-dma-pool [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 129980 [ 0.000000] free_area_init_node: node 0, pgdat c0b552f4, node_mem_map dfbf8000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129980 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128956 [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p4 rootwait init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:boot@mmcblk0p3:rootfs@mmcblk0p4:rootfs_data@mmcblk0p5:recovery@mmcblk0p6:UDISK@mmcblk0p7 cma= mac_addr= wifi_mac= bt_mac= selinux= specialstr= coherent_pool=32K ion_carveout_list= androidboot.mode=normal androidboot.hardware=sun8iw21p1 boot_type=2 androidboot.boot_type=2 gpt=1 androidboot.verifiedbootstate=<NULL> uboot_message=2018.05(11/06/2022-13:44:39) mbr_offset=1126400 disp_reserve=4096000,0x5df1a000 bootreason=unknow androidboot.dramsize=512 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 498540K/519920K available (6144K kernel code, 344K rwdata, 2276K rodata, 1024K init, 182K bss, 21380K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b56390 ( 345 kB) [ 0.000000] .bss : 0xc0b56390 - 0xc0b83ca4 ( 183 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sunxi_efuse_readn failed:-13 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000202] Console: colour dummy device 80x30 [ 0.000226] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000240] pid_max: default: 32768 minimum: 301 [ 0.000429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000442] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000981] CPU: Testing write buffer coherency: ok [ 0.001476] Setting up static identity map for 0x40100000 - 0x40100058 [ 0.003003] devtmpfs: initialized [ 0.040342] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.040852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.040876] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.041024] atomic64_test: passed [ 0.041035] pinctrl core: initialized pinctrl subsystem [ 0.042127] NET: Registered protocol family 16 [ 0.042854] DMA: preallocated 32 KiB pool for atomic coherent allocations [ 0.044143] dump_class_init,857, success [ 0.069459] cpuidle: using governor menu [ 0.070682] platform 2010000.iommu: iova_base: 0x48400000 [ 0.071154] sunxi iommu: irq = 22 [ 0.091361] sun8iw21p1-pinctrl pio: initialized sunXi PIO driver [ 0.093149] sunxi hwspinlock vbase:0xe0822000 [ 0.094994] iommu: Adding device npu to group 0 [ 0.096669] iommu: Adding device 1c0e000.ve to group 0 [ 0.111569] iommu: Adding device 5410000.g2d to group 0 [ 0.112517] iommu: Adding device 5000000.disp to group 0 [ 0.122629] iommu: Adding device 5908000.tdm to group 0 [ 0.123286] iommu: Adding device 5900000.isp to group 0 [ 0.124163] iommu: Adding device 58ffffc.isp to group 0 [ 0.124994] iommu: Adding device 58ffff8.isp to group 0 [ 0.125628] iommu: Adding device 58ffff4.isp to group 0 [ 0.126161] iommu: Adding device 5800800.vind:isp@4 to group 0 [ 0.126827] iommu: Adding device 5910000.scaler to group 0 [ 0.127244] iommu: Adding device 590fffc.scaler to group 0 [ 0.127827] iommu: Adding device 590fff8.scaler to group 0 [ 0.128333] iommu: Adding device 590fff4.scaler to group 0 [ 0.129143] iommu: Adding device 5910400.scaler to group 0 [ 0.129978] iommu: Adding device 59103fc.scaler to group 0 [ 0.130530] iommu: Adding device 59103f8.scaler to group 0 [ 0.130968] iommu: Adding device 59103f4.scaler to group 0 [ 0.131723] iommu: Adding device 5910800.scaler to group 0 [ 0.132283] iommu: Adding device 59107fc.scaler to group 0 [ 0.132797] iommu: Adding device 59107f8.scaler to group 0 [ 0.133351] iommu: Adding device 59107f4.scaler to group 0 [ 0.134018] iommu: Adding device 5910c00.scaler to group 0 [ 0.134642] iommu: Adding device 5910bfc.scaler to group 0 [ 0.135069] iommu: Adding device 5910bf8.scaler to group 0 [ 0.135638] iommu: Adding device 5910bf4.scaler to group 0 [ 0.136873] iommu: Adding device vinc0 to group 0 [ 0.137727] iommu: Adding device vinc4 to group 0 [ 0.138673] iommu: Adding device vinc8 to group 0 [ 0.139473] iommu: Adding device vinc12 to group 0 [ 0.184348] pwm module init! [ 0.188913] sunxi-pm debug v3.10 [ 0.193237] SCSI subsystem initialized [ 0.193959] usbcore: registered new interface driver usbfs [ 0.194139] usbcore: registered new interface driver hub [ 0.194315] usbcore: registered new device driver usb [ 0.194606] sunxi_i2c_adap_init()2748 - init [ 0.195068] sunxi_i2c_probe()2443 - [i2c0] twi_drv_used = 0 [ 0.195083] sunxi_i2c_probe()2450 - [i2c0] twi_pkt_interval = 0 [ 0.195159] twi_regulator_request()647 - [i2c0] regulator not found(isn't configured in dts)! [ 0.195168] twi_request_gpio()463 - [i2c0] init name: (null) [ 0.195999] sunxi_i2c_probe()2443 - [i2c1] twi_drv_used = 0 [ 0.196018] sunxi_i2c_probe()2450 - [i2c1] twi_pkt_interval = 0 [ 0.196093] twi_regulator_request()647 - [i2c1] regulator not found(isn't configured in dts)! [ 0.196104] twi_request_gpio()463 - [i2c1] init name: (null) [ 0.197534] sunxi_i2c_probe()2443 - [i2c2] twi_drv_used = 0 [ 0.197554] sunxi_i2c_probe()2450 - [i2c2] twi_pkt_interval = 0 [ 0.197628] twi_regulator_request()647 - [i2c2] regulator not found(isn't configured in dts)! [ 0.197639] twi_request_gpio()463 - [i2c2] init name: (null) [ 0.199416] sunxi_i2c_probe()2443 - [i2c3] twi_drv_used = 0 [ 0.199434] sunxi_i2c_probe()2450 - [i2c3] twi_pkt_interval = 0 [ 0.199510] twi_regulator_request()647 - [i2c3] regulator not found(isn't configured in dts)! [ 0.199520] twi_request_gpio()463 - [i2c3] init name: (null) [ 0.201153] sunxi_i2c_probe()2443 - [i2c4] twi_drv_used = 0 [ 0.201171] sunxi_i2c_probe()2450 - [i2c4] twi_pkt_interval = 0 [ 0.201254] twi_regulator_request()647 - [i2c4] regulator not found(isn't configured in dts)! [ 0.201265] twi_request_gpio()463 - [i2c4] init name: (null) [ 0.202365] axp20x-i2c 4-0034: AXP20x variant AXP2101 found [ 0.219328] random: fast init done [ 0.232056] axp20x-i2c 4-0034: AXP20X driver loaded [ 0.232569] media: Linux media interface: v0.10 [ 0.232713] Linux video capture interface: v2.00 [ 0.235943] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000 [ 0.236266] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000 [ 0.237476] Advanced Linux Sound Architecture Driver Initialized. [ 0.238363] Bluetooth: Core ver 2.22 [ 0.238508] NET: Registered protocol family 31 [ 0.238520] Bluetooth: HCI device and connection manager initialized [ 0.238540] Bluetooth: HCI socket layer initialized [ 0.238555] Bluetooth: L2CAP socket layer initialized [ 0.238594] Bluetooth: SCO socket layer initialized [ 0.241798] G2D: rcq version initialized.major:251 [ 0.243593] clocksource: Switched to clocksource arch_sys_counter [ 0.272298] udc_init,0 [ 0.273450] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.274160] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 0.274339] NET: Registered protocol family 2 [ 0.293887] TCP established hash table entries: 16 (order: -6, 64 bytes) [ 0.293905] TCP bind hash table entries: 16 (order: -6, 64 bytes) [ 0.293915] TCP: Hash tables configured (established 16 bind 16) [ 0.293978] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.294009] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.294220] NET: Registered protocol family 1 [ 0.298732] sunxi_sid_driver_init+0x0/0x10 complete comp. [ 0.299641] workingset: timestamp_bits=29 max_order=17 bucket_order=0 [ 0.316002] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.320052] io scheduler noop registered [ 0.320068] io scheduler deadline registered [ 0.320345] io scheduler cfq registered (default) [ 0.321597] [DISP]disp_module_init [ 0.323021] [DISP] disp_init,line:2340: [ 0.323038] smooth display screen:0 type:1 mode:4 [ 0.360838] lcd 0, driver_name t050k589, panel_name default_lcd [ 0.360856] lcd 0, driver_name t050k589, panel_name t050k589 [ 0.360874] lcd 0, driver_name t050k589, panel_name icn6202 [ 0.360882] lcd 0, driver_name t050k589, panel_name super_lcd_driver [ 0.361015] display_fb_request,fb_id:0 [ 0.370468] [DISP] de_fcm_set_para,line:491: [ 0.370483] fcm lut 0 not find, auto retry after init [ 0.371716] [DISP]disp_module_init finish [ 0.374525] [DISP] de_fcm_set_para,line:491: [ 0.374539] fcm lut 0 not find, auto retry after init [ 0.374563] [DISP] de_fcm_set_para,line:491: [ 0.374569] fcm lut 0 not find, auto retry after init [ 0.374638] [DISP] lcd_clk_config,line:699: [ 0.374651] disp 0, clk: pll(360000000),clk(360000000),dclk(60000000) dsi_rate(60000000) [ 0.374651] clk real:pll(360000000),clk(360000000),dclk(90000000) dsi_rate(150000000) [ 0.381023] Freeing logo buffer memory: 4000K [ 0.381278] uart0: ttyS0 at MMIO 0x2500000 (irq = 289, base_baud = 1500000) is a SUNXI [ 0.381307] sw_console_setup()2050 - console setup baud 115200 parity n bits 8, flow n [ 1.601492] console [ttyS0] enabled [ 1.607000] uart2: ttyS2 at MMIO 0x2500800 (irq = 290, base_baud = 1500000) is a SUNXI [ 1.617378] misc dump reg init [ 1.621620] npu[1][1] vipcore, platform driver device=0xdf5a5410 [ 1.628727] npu[1][1] vipcore irq number is 291. [ 1.633992] gckvip_drv_adjust_param 232 SUCCESS [ 1.639145] Want set pclk rate(492000000) support(492000000) real(492000000) [ 1.647268] Want set mclk rate(492000000) support(492000000) real(492000000) [ 1.655239] npu[1][1] This device support 64bits DMA [ 1.661307] npu[1][1] core_0, request irqline=291, name=vipcore_0 [ 1.668433] npu[1][1] =======vipcore parameter===== [ 1.674003] npu[1][1] registerMemBase 0x03050000, [ 1.679777] npu[1][1] registerMemSize 0x00020000, [ 1.685584] npu[1][1] irqLine 0x00000123, [ 1.691368] npu[1][1] contiguousSize 0x00100000 [ 1.697016] npu[1][1] contiguousBase 0x30000000 [ 1.702592] npu[1][1] vipContiguousBase 0x0 [ 1.707532] npu[1][1] drvType 0x00000000 [ 1.713109] npu[1][1] AXISramSize 0x00000000 [ 1.718711] npu[1][1] AXISramBaseAddress 0x00000000 [ 1.724308] npu[1][1] VIPSramSize 0x00020000 [ 1.729884] npu[1][1] VIPSramBaseAddress 0x00400000 [ 1.735472] npu[1][1] sysHeapSize 0x00200000 [ 1.741055] npu[1][1] =============================== [ 1.746811] npu[1][1] VIPLite driver version 1.8.1.0-AW-2022-07-26 [ 1.754609] sunxi-bt soc@03000000:bt: bt_power_num (0) [ 1.760425] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. [ 1.767134] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) [ 1.773978] sunxi-bt soc@03000000:bt: request pincrtl handle for device [soc@03000000:bt] failed [ 1.783934] sunxi-bt soc@03000000:bt: bt_rst gpio=136 mul-sel=5 pull=1 drv_level=2 data=0 [ 1.793558] sunxi-bt soc@03000000:bt: clk_name () [ 1.798935] sunxi-bt soc@03000000:bt: clk not config [ 1.805435] sun8iw21p1-pinctrl pio: expect_func as:fanout0, but muxsel(3) is func:clk [ 1.814615] sunxi-wlan soc@03000000:wlan@0: wlan_busnum (1) [ 1.820884] sunxi-wlan soc@03000000:wlan@0: wlan power voltage (3300000) [ 1.828506] sunxi-wlan soc@03000000:wlan@0: wlan io voltage (3300000) [ 1.835784] sunxi-wlan soc@03000000:wlan@0: wlan_power_num (1) [ 1.842355] sunxi-wlan soc@03000000:wlan@0: wlan_power_name (axp2101-dcdc1) [ 1.850257] sunxi-wlan soc@03000000:wlan@0: io_regulator_name (axp2101-dcdc1) [ 1.858365] sunxi-wlan soc@03000000:wlan@0: wlan_regon gpio=239 mul-sel=1 pull=1 drv_level=2 data=0 [ 1.868985] sunxi-wlan soc@03000000:wlan@0: get gpio chip_en failed [ 1.876071] sunxi-wlan soc@03000000:wlan@0: wlan_hostwake gpio=199 mul-sel=14 pull=1 drv_level=2 data=0 [ 1.887141] sunxi-wlan soc@03000000:wlan@0: clk_name () [ 1.894548] libphy: Fixed MDIO Bus: probed [ 1.899998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.907839] get ehci0-controller, regulator_io is no nocare [ 1.914176] get ehci0-controller wakeup-source is fail. [ 1.920202] sunxi ehci0-controller don't init wakeup source [ 1.926633] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b76ac8, 0x:e0848000, irq_no:137 [ 1.938812] [sunxi-ehci0]: Not init ehci0 [ 1.943857] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.951208] get ohci0-controller, regulator_io is no nocare [ 1.957667] get ohci0-controller wakeup-source is fail. [ 1.963760] sunxi ohci0-controller don't init wakeup source [ 1.970108] [sunxi-ohci0]: probe, pdev->name: 4101000.ohci0-controller, sunxi_ohci: 0xc0b76cec [ 1.979873] [sunxi-ohci0]: Not init ohci0 [ 1.985076] usbcore: registered new interface driver uas [ 1.991475] usbcore: registered new interface driver usb-storage [ 1.998459] usbcore: registered new interface driver ums-alauda [ 2.005436] usbcore: registered new interface driver ums-cypress [ 2.012434] usbcore: registered new interface driver ums-datafab [ 2.019466] usbcore: registered new interface driver ums_eneub6250 [ 2.026779] usbcore: registered new interface driver ums-freecom [ 2.033814] usbcore: registered new interface driver ums-isd200 [ 2.040756] usbcore: registered new interface driver ums-jumpshot [ 2.047824] usbcore: registered new interface driver ums-karma [ 2.054719] usbcore: registered new interface driver ums-onetouch [ 2.061833] usbcore: registered new interface driver ums-realtek [ 2.068855] usbcore: registered new interface driver ums-sddr09 [ 2.075877] usbcore: registered new interface driver ums-sddr55 [ 2.082772] usbcore: registered new interface driver ums-usbat [ 2.089531] usb_serial_number:20080411 [ 2.094182] [GOODIX 9XX INFO] LINE:0122-->goodix_reset:reset the tp !!!!!! [ 2.203783] sunxi_i2c_do_xfer()1968 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x5d) [ 2.213183] Goodix-TS 2-005d: read version failed: -70 [ 2.218974] Goodix-TS 2-005d: Read version failed. [ 2.224426] Goodix-TS: probe of 2-005d failed with error -70 [ 2.231113] ERROR! get ctp_para failed, func:sunxi_ctp_startup, line:46 [ 2.238725] =========script_get_item_err============ [ 2.251103] input: axp2101-pek as /devices/platform/soc/twi4/i2c-4/4-0034/axp2101-pek.0/input/input0 [ 2.263309] input: sunxi-wiegand0 as /devices/virtual/input/input1 [ 2.271668] sunxi_gpadc_init,1949, success [ 2.276952] sunxi_gpadc_setup: get channel scan data failed [ 2.284403] input: sunxi-gpadc0 as /devices/virtual/input/input2 [ 2.293311] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 [ 2.300567] sunxi-rtc rtc: RTC enabled [ 2.304960] fix to hot reboot, save boot reason [ 2.310454] i2c /dev entries driver [ 2.316137] sunxi cedar version 0.1 [ 2.320388] VE: install start!!! [ 2.320388] [ 2.326252] VE: cedar-ve the get irq is 292 [ 2.331048] VE: regs_csi = e0883000 [ 2.335647] VE: ve_proc_mgr: flag = 1 [ 2.335647] [ 2.341458] VE: install end!!! [ 2.341458] [ 2.347259] google_vp9: sunxi google vp9 version 0.1 [ 2.356898] axp2101_charger: read chipid = 4a [ 2.356898] [ 2.370777] thermal thermal_zone3: power_allocator: sustainable_power will be estimated [ 2.402885] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.412637] Bluetooth: HCI UART driver ver 2.2.d448471.20181218-163903 [ 2.420431] Bluetooth: HCI UART protocol H4 registered [ 2.426821] Bluetooth: HCI H4 protocol initialized [ 2.432923] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 01.00.07 [ 2.441693] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1 [ 2.448154] axp2101_charger: the gauge have been reset, need to reload param [ 2.448154] [ 2.458159] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 0 [ 2.464758] [XR_BT_LPM] bluesleep_probe: uart_index(2) [ 2.471518] bt_fdi debugfs_init [ 2.514246] cpuidle: enable-method property 'psci' found operations [ 2.523579] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 2.532623] sunxi-mmc sdc2: ***ctl-spec-caps*** 308 [ 2.539151] sunxi-mmc sdc2: No vdmmc regulator found [ 2.544836] sunxi-mmc sdc2: No vd33sw regulator found [ 2.550498] sunxi-mmc sdc2: No vd18sw regulator found [ 2.556244] sunxi-mmc sdc2: No vq33sw regulator found [ 2.561904] sunxi-mmc sdc2: No vq18sw regulator found [ 2.567997] sunxi-mmc sdc2: set host busy [ 2.572570] mmc:failed to get gpios [ 2.576839] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.613638] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.653621] sunxi-mmc sdc2: detmode:alway in(non removable) [ 2.653646] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.662002] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.663066] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.673904] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.673972] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.686802] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.731461] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 2.740431] sunxi-mmc sdc0: ***ctl-spec-caps*** 408 [ 2.747677] sunxi-mmc sdc0: No vqmmc regulator found [ 2.753267] sunxi-mmc sdc0: No vdmmc regulator found [ 2.759368] sunxi-mmc sdc0: set host busy [ 2.763969] sunxi-mmc sdc0: Got CD GPIO [ 2.768683] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.814841] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 2.838722] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing MMC-HS(SDR20) dt B [ 2.849904] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 1 timing MMC-HS(SDR20) dt B [ 2.861072] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 8 timing MMC-HS(SDR20) dt B [ 2.872256] sunxi-mmc sdc2: sdc set ios:clk 50000000Hz bm PP pm ON vdd 22 width 8 timing MMC-DDR52 dt B [ 2.883194] mmc0: new DDR MMC card at address 0001 [ 2.889424] mmcblk0: mmc0:0001 AT2S38 7.23 GiB [ 2.894861] mmcblk0boot0: mmc0:0001 AT2S38 partition 1 4.00 MiB [ 2.901804] mmcblk0boot1: mmc0:0001 AT2S38 partition 2 4.00 MiB [ 2.909090] mmcblk0rpmb: mmc0:0001 AT2S38 partition 3 4.00 MiB [ 2.918335] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 3.023706] sunxi-mmc sdc0: no vqmmc,Check if there is regulator [ 3.053612] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B [ 3.093788] sunxi-mmc sdc0: detmode:gpio irq [ 3.099072] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40) [ 3.108025] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 [ 3.113365] sunxi-mmc sdc1: No vmmc regulator found [ 3.118875] sunxi-mmc sdc1: No vqmmc regulator found [ 3.124453] sunxi-mmc sdc1: No vdmmc regulator found [ 3.130015] sunxi-mmc sdc1: No vd33sw regulator found [ 3.135693] sunxi-mmc sdc1: No vd18sw regulator found [ 3.141352] sunxi-mmc sdc1: No vq33sw regulator found [ 3.147021] sunxi-mmc sdc1: No vq18sw regulator found [ 3.153066] sunxi-mmc sdc1: set host busy [ 3.157654] mmc:failed to get gpios [ 3.161850] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.193638] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.233620] sunxi-mmc sdc1: detmode:manually by software [ 3.239613] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.245602] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.245622] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.253687] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.265499] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.276273] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.282143] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.288028] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.288047] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.289116] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.311177] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.321507] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.344073] usbcore: registered new interface driver usbhid [ 3.350340] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.356595] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.356635] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.364775] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.376625] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.387463] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.393367] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.399251] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.399283] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.400358] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.432680] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.443982] usbhid: USB HID core driver [ 3.451457] [sound 1158][DAUDIO snd_sunxi_regulator_init] regulator missing or invalid [ 3.462036] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.468244] sunxi-snd-mach soc@03000000:codec_mach: sunxi-snd-codec <-> soc@03000000:codec_plat mapping ok [ 3.479108] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.479169] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.487353] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.499259] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.510054] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.515951] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.521833] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.521849] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.522928] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.546068] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.569426] sunxi-snd-mach soc@03000000:daudio0_mach: snd-soc-dummy-dai <-> 2032000.daudio0_plat mapping ok [ 3.582206] Netfilter messages via NETLINK v0.30. [ 3.587543] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.593837] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !! [ 3.593877] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.602063] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 3.613958] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.624845] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.630737] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.636632] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !! [ 3.636661] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 3.660082] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 3.667132] ctnetlink v0.93: registering with nfnetlink. [ 3.673392] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.680509] NET: Registered protocol family 10 [ 3.686961] NET: Registered protocol family 17 [ 3.691973] NET: Registered protocol family 15 [ 3.697290] Bluetooth: RFCOMM TTY layer initialized [ 3.702771] Bluetooth: RFCOMM socket layer initialized [ 3.708648] Bluetooth: RFCOMM ver 1.11 [ 3.714157] Registering SWP/SWPB emulation handler [ 3.726656] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:31 UTC (31) [ 3.735855] clk: Not disabling unused clocks [ 3.740765] usb-vbus: disabling [ 3.744713] axp2101-dcdc2: disabling [ 3.749424] axp2101-rtcldo1: disabling [ 3.753960] axp2101-aldo2: disabling [ 3.758635] axp2101-aldo3: disabling [ 3.763321] axp2101-aldo4: disabling [ 3.768040] axp2101-bldo2: disabling [ 3.772712] axp2101-dldo1: disabling [ 3.777424] axp2101-dldo2: disabling [ 3.782121] axp2101-cpusldo: disabling [ 3.786774] ALSA device list: [ 3.790095] #0: audiocodec [ 3.793316] #1: snddaudio0 [ 3.812064] VFS: Mounted root (squashfs filesystem) readonly on device 179:4. [ 3.821537] devtmpfs: mounted [ 3.826660] Freeing unused kernel memory: 1024K mount: mounting none on /dev failed: Resource busy [ 4.022775] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! [ 4.035671] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal starting pid 841, tty '': '/etc/preinit' can't run '/etc/preinit': No such file or directory starting pid 842, tty '': '/bin/mount -t proc proc /proc' mount: mounting proc on /proc failed: Resource busy starting pid 843, tty '': '/bin/mount -t tmpfs tmpfs /run' starting pid 844, tty '': '/bin/mount -o remount,rw /' starting pid 845, tty '': '/bin/mkdir -p /dev/pts' starting pid 846, tty '': '/bin/mkdir -p /dev/shm' starting pid 847, tty '': '/bin/mount -a' starting pid 848, tty '': '/bin/hostname -F /etc/hostname' hostname: can't open '/etc/hostname': No such file or directory starting pid 849, tty '': '/etc/init.d/rcS boot' ------run rc.preboot file----- [ 4.193497] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) ------run rc.modules file----- [ 4.252352] ======== XRADIO WIFI OPEN ======== [ 4.257587] [XRADIO] Driver Label:XR_V02.16.91 _HT40_01.33 Oct 28 2022 04:26:30 [ 4.265983] [XRADIO] Allocated hw_priv @ dec7cc80 [ 4.271399] [XRADIO_ERR] Access_file failed, path:/data/misc/wifi/xr_wifi.conf! [ 4.280373] sunxi-wlan soc@03000000:wlan@0: bus_index: 1 [ 4.287787] sunxi-wlan soc@03000000:wlan@0: check wlan wlan_power voltage: 3300000 [ 4.297692] sunxi-wlan soc@03000000:wlan@0: check wlan io_regulator voltage: 3300000 [ 4.416530] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.426800] [XRADIO] Detect SDIO card 1 [ 4.463642] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.504254] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.517467] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 4.538479] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 4.549204] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 4.560195] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B [ 4.571698] mmc2: new high speed SDIO card at address 0001 [ 4.578474] [SBUS] XRadio Device:sdio clk=50000000 [ 4.584678] [XRADIO] XRADIO_HW_REV 1.0 detected. [ 4.664022] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000. [ 4.705928] [XRADIO] Bootloader complete [ 4.794118] [XRADIO] Firmware completed. [ 4.799867] [WSM] Firmware Label:XR_C09.08.52.73_DBG_02.122 2GHZ HT40 May 18 2021 13:36:09 [ 4.817315] [XRADIO] Firmware Startup Done. [ 4.822313] [XRADIO_WRN] enable Multi-Rx! [ 4.840778] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ------run rc.final file----- Load mpp modules [ 4.917246] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL! [ 4.928100] [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL! [ 5.229749] [VIN_ERR]registering imx386_mipi_2, No such device! insmod: can't insert '/lib/modules/4.9.191/sunxi_aio.ko': No such file or directory insmod: can't insert '/lib/modules/4.9.191/sunxi_eise.ko': No such file or directory Starting logging: start-stop-daemon: unrecognized option: exec start-stop-daemon: unrecognized option: exec OK Starting audio: Successfully play boot music Populating /dev using udev: playing '/home/res/audio/startup.wav': 2 ch, 48000 hz, 16 bit [ 5.342227] udevd[972]: could not create /tmp/run/udev: No such file or directory done mkdir: can't create directory '/dev/pts': File exists mkdir: can't create directory '/dev/shm': File exists Initializing random number generator... [ 5.506585] random: dd: uninitialized urandom read (512 bytes read) done. Starting network: Failed to connect to ubus /sbin/ifup: line 51: /sbin/wifi: not found FAIL ifconfig: invalid hw-addr 00: udhcpc: SIOCGIFINDEX: No such device Starting telnetd: OK enable android usb insmod: can't insert '/lib/modules/4.9.191/sunxi_usb_udc.ko': No such file or directory insmod: can't insert '/lib/modules/4.9.191/sunxi_usbc.ko': No such file or directory [ 5.651731] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 5.673798] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) Unknown group "lp" in message bus configuration file [ 5.799449] file system registered [ 5.815475] configfs-gadget 4100000.udc-controller: failed to start g1: -19 sh: write error: No such device Starting wifi_deamon....: [ 5.832947] read descriptors [ 5.836338] read strings 1970-01-01 00:00:33:636: WMG_INFO [wifi_deamon.c:main:1076]: debug log level is: 3 1970-01-01 00:00:33:637: WMG_INFO [wifi_deamon.c:main:1078]: now set to debug level: 6 [ACT D][ring_buff_init,27]enter [ACT D][ring_buff_start,173]ring buffer start enter [ACT D][ring_buff_start,187]ring buffer start quit [ 7.323613] [ 7.323613] insmod_device_driver [ 7.323613] [ 7.572517] android_work: sent uevent USB_STATE=CONNECTED [ 7.673715] configfs-gadget gadget: high-speed config #1: c [ 7.680148] android_work: sent uevent USB_STATE=CONFIGURED Close IRCUT........1970-01-01 00:00:35:645: WMG_DEBUG [wifi_deamon.c:cmd_handle_thread:961]: get cmd: o sta 1970-01-01 00:00:35:645: WMG_DEBUG [wifi_deamon.c:cmd_handle_o:259]: cmd handle o: sta 1970-01-01 00:00:35:645: WMG_INFO [wifi_deamon.c:cmd_handle_o:261]: open sta mode 1970-01-01 00:00:35:645: WMG_INFO [src/wmg_sta.c:sta_mode_init:363]: sta mode init now 1970-01-01 00:00:35:645: WMG_INFO [src/os/linux/linux_wpa.c:linux_supplicant_init:1436]: linux supplicant init now 1970-01-01 00:00:35:645: WMG_INFO [src/wmg_ap.c:ap_mode_init:216]: ap mode init now 1970-01-01 00:00:35:645: WMG_INFO [src/os/linux/linux_hapd.c:linu[ 7.930293] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. x_ap_hapd_init:754]: linux hostapd init now 1970-01-01 00:00:35:645: WMG_INFO [src/wmg_monitor.c:monitor_mode_init:206]: monitor mode init now 1970-01-01 00:00:35:645: WMG_INFO [src/os/linux/linux_nl.c:linux_monitor_nl_init:250]: linux monitor nl init now 1970-01-01 00:00:35:646: WMG_DEBUG [src/os/linux/linux_nl.c:linux_monitor_nl_init:255]: nl80211 init success 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_init:837]: wifi_manager initialize, version: 2.0.1 Copyright (c) 2019-2025 Allwinner Technology Co., Ltd. ALL rights reserved 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:950]: switch wifi mode from current_mode 'unknown' to new_mode 'station' 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:954]: switch_mode_bitmap:0x1 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:955]: current_mode_bitmap:0x0 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:958]: disable_mode_bitmap:0x0 1970-01-01 00:00:35:646: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:988]: enable_mode_bitmap:0x1 1970-01-01 00:00:35:646: WMG_DUMP [src/wmg_sta.c:sta_mode_enable:412]: wifi station enabling... /etc/init.d/rcS: /etc/init.d/rc.final: line 36: powerkey_daemon: not found 1970-01-01 00:00:35:69[ 8.056746] urandom_read: 2 callbacks suppressed 0: WMG_EXCESSIVE [src/os/linux/utils.c:check_process_is_exist:32]: hostapd not exist Trying to [ 8.056753] random: wpa_supplicant: uninitialized urandom read (3 bytes read) connect to SWUpdate... 1970-01-01 00:00:35:740: WMG_EXCESSIVE [src/os/linux/utils.c:check_proce[ 8.086280] random: wpa_supplicant: uninitialized urandom read (1024 bytes read) ss_is_exist:32]: wpa_supplicant not exist 1970-01-01 00:00:35:740: WMG_DEBUG [src/os/linux/linux_wpa.c:linux_connect_to_supplicant:1519]: wpa_supplicant is not running, need to start it mount: mounting /dev/mmcblk1p1 on /mnt/sdcard failed: No such file or directory starting pid 1087, tty '/dev/console': '-/bin/sh' BusyBox v1.27.2 () built-in shell (ash) ------run profile file----- _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| [ 8.144105] ieee80211_do_open: vif_type=2, p2p=0, ch=3, addr=a4:51:88:94:12:4c |_| |_||_|_||_|_| Tina is B[ 8.155212] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0, addr=a4:51:88:94:12:4c ased on OpenWrt! ---------------------------------------------- Tina Linux (Neptune, 5C1C9C5[ 8.173238] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined. 3) ---------------------------------------------- swu_param: #### swu_software: #### swu_mode: #### no swupdate_cmd to run, wait for next swupdate root@TinaLinux:/# Successfully initial[ 8.197019] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ized wpa_supplicant [ 8.253563] random: wpa_supplicant: uninitialized urandom read (3 bytes read) 1970-01-01 00:00:36:767: WMG_EXCESSIVE [src/os/linux/utils.c:check_process_is_exist:29]: wpa_supplicant exist 1970-01-01 00:00:36:768: WMG_DEBUG [src/os/linux/linux_wpa.c:start_supplicant:367]: start wpa_supplicant times 1 success 1970-01-01 00:00:36:768: WMG_EXCESSIVE [src/os/linux/linux_wpa.c:linux_connect_to_supplicant:1526]: start wpa_supplicant success 1970-01-01 00:00:36:768: WMG_EXCESSIVE [src/os/linux/linux_wpa.c:wifi_connect_on_socket_path:168]: connect to wpa_supplicant ok! 1970-01-01 00:00:36:769: WMG_DUMP [src/os/linux/linux_wpa.c:linux_connect_to_supplicant:1561]: create linux sta event handle thread success 1970-01-01 00:00:36:769: WMG_DUMP [src/wmg_sta.c:sta_mode_enable:420]: start wpa_supplicant success 1970-01-01 00:00:36:769: WMG_DUMP [src/wmg_sta.c:sta_mode_enable:424]: wifi station enable success 1970-01-01 00:00:36:769: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:994]: wifi sta mode enable success 1970-01-01 00:00:36:769: WMG_DEBUG [src/wmg_common.c:wifimg_switch_mode:1014]: switch after current_mode_bitmap:0x1 1970-01-01 00:00:36:769: WMG_DEBUG [src/wmg_common.c:__wifi_on:46]: switch wifi mode success 1970-01-01 00:00:36:769: WMG_INFO [wifi_deamon.c:cmd_handle_o:265]: wifi on sta mode success 1970-01-01 00:00:36:769: WMG_INFO [wifi_deamon.c:cmd_handle_o:270]: wifi register msg cb 1970-01-01 00:00:36:769: WMG_DEBUG [src/wmg_sta.c:sta_mode_ctl:463]: =====sta_mode_ctl cmd: 9===== 1970-01-01 00:00:36:769: WMG_WARNG [src/wmg_ap.c:ap_mode_ctl:308]: wifi ap already disabled 1970-01-01 00:00:36:769: WMG_WARNG [src/wmg_monitor.c:monitor_mode_ctl:298]: wifi monitor already disabled 1970-01-01 00:00:36:769: WMG_DEBUG [src/wmg_common.c:__wifi_register_msg_cb:433]: register msg cb success [ 67.134329] random: crng init done [ 67.138150] random: 2 urandom warning(s) missed due to ratelimiting手上这个V853开发板，只烧写了安全固件，但是没有烧rotpk.bin,
只符合:“sboot commit...”、“OLD version:...”、“NEW version: ...”、“secure enable bit: 1
不符合:
“have rotpk, do check”
所以，现在这块V853开发板只能烧加密固件（不管密钥是啥），不能烧非加密固件了：
-
回复: 在wsl下开发T113的主线linux（最新gcc+awboot+最新kernel+最新buildroot）发布在 其它全志芯片讨论区
这篇文章记录了在wsl系统下编译调试awboot和linux的全过程
硬件要求：任意T113-S3芯片的板子，SPI0接spinand标准接法。
1、准备wsl开发环境
首先在win10或win11下安装wsl，选择wsl1或者wsl2都可以，wsl2的性能更高一些，wsl1的跨系统文件操作速度更快一些，我这里因为有一些工程在win文件系统下，所以选择了wsl1，发行版使用最新的Ubuntu 22.04.01 LTS。
这里我没有选用vm虚拟机安装ubuntu开发的原因是虚拟机下的文件交互不够方便，特别是git和文件对比，有时在内核源码改了一些文件，使用win下的TortoiseGit工具就可以很方便的查看差异，提交变更。使用beyond compare也可很方便的比较各种文件文件夹的不同版本的差异。
在win资源管理器下可以直接查看wsl的linux根目录，右键可以直接执行各种操作，就像操作win文件一样这里编译开发的核心软件只有一个，就是VS code，安装好后添加所需的插件。
串口调试工具使用MobaXterm下载交叉编译器，这里使用arm官方最新的GCC 12.2
https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads
arm-gnu-toolchain-12.2.rel1-x86_64-arm-none-linux-gnueabihf.tar.xz
下载后解压在wsl的主目录，在.bashrc中添加编译器路径PATH="$PATH:/home/wsl/arm-none-linux-gnueabihf/bin"
2、编译awboot
意外发现有awboot能够代替uboot直接引导内核，体验了一下果断选择awboot，因为足够简洁，编译大小只有32k，和uboot接近1M的体量相比，简直是小而美，启动速度也比uboot快上不少，也能同时支持sd卡，spinand，spinorflash启动。
https://github.com/szemzoa/awboot说起uboot不禁想起几年前路由器第三方固件盛行的时期，那时的路由器还没有很复杂的方案，第三方固件往往比官方固件更易用功能更丰富，买个普通路由器换颗flash，内存芯片刷个系统就能获得更丰富的功能体验，各种固件openwrt，Padavan，高格百花齐放，为了刷机方便，系统的uboot都要支持tftp，串口甚至web的文件传输接口，由此孕育而出了大名鼎鼎的Breed，仅仅为了更新固件更方便，不用spi flash编程器那么麻烦的烧写。而到了全志嵌入式这边，由于自带usb接口的BROM，使用sunxi-fel或者xfel烧写flash已足够方便，所以使用uboot更新固件的需求就不是那么大，况且全志的方案比路由器的方案定制性更高一些，没有通用的第三方固件可以刷，所以uboot的功能就完全成了摆设，让用户使用sunxi-fel更新固件都要比uboot更新固件更稳定更实用，消费者用户用不到，开发人员也不会去用，那uboot的1m大小，集成的各种usb，网络，屏幕驱动，环境变量，文件系统，设备树编辑等功能就显得格外多余。
awboot相比spl+uboot的区别就是少了一次跳转的过程，由BROM拉起的boot0拥有足足160kb的sram，足够编写执行引导kernel的代码，所以这何尝不是一种恰到好处。
下面是awboot的编译过程：
修改makefile中的CROSS_COMPILE编译器定义为arm-none-linux-gnueabihf，或者使用make CROSS_COMPILE=arm-none-linux-gnueabihf
命令编译
如果不是git拉取的而是手动下载解压的源码，需要去除git编译目标，位于makefile line:49
出现DWORD重复定义的错误，删除lib\fatfs\integer.h中的DWORD定义
链接出现未定义函数__aeabi_unwind_cpp_pr0，makefile中添加编译选项CFLAGS += -lgcc_eh
链接出现未定义函数raise，在main.c中添加函数int raise(void) { return 0; }编译成功，出现awboot.bin等文件
3、写入spinand测试
接下来是烧写入硬件验证，我的板子焊接的是W25N01GV，这里使用xfel，因为支持写入spi-nand。
https://github.com/xboot/xfel为什么不使用sd卡验证，因为烧写sd卡需要：
拔卡->插到电脑->dd命令写入->拔卡->插到板子上。
而写入spi-nand只需要：
按着boot键同时按复位键->xfel命令写入(可以飞线两个按键，复位键接到reset脚到地，boot键接到spi-cs脚到地)。
步骤大幅减少，同时没有拔插sd卡造成的触点磨损。同时因为使用的wsl系统，并不能很方便的使用dd命令写入sd卡。虽然wsl下也不能直接访问全志的usb设备，但是xfel有win的版本，wsl下可直接执行exe文件，所以只需要下载xfel-windows解压到wsl中，在.bashrc中添加命令别名alias xfel='/home/wsl/xfel-windows-v1.2.9/xfel.exe'
即可在wsl中使用win版的xfel，就像linux中的xfel一模一样。make spi-boot.img xfel version xfel spinand xfel spinand erase 0 0x8000000 xfel spinand write 0 spi-boot.img复位重启，可以在串口看到awboot打印的信息
awboot默认使用uart5打印，其他串口可以修改board.c中的配置，非常通俗易懂
内核加载地址如下表，可在board.h中修改- spi-nand内存划分 起始地址 空间容量
- awboot 0 0x40000(256k)
- dtb 0x40000 0x40000(256k)
- kernel 0x80000 任意
[I] AWBoot r6143 starting... [I] SPI-NAND: W25N01GV detected [E] SPI-NAND: DTB verification failed [F] SPI-NAND: loading failed restarting...4、编译kernel
接下来编译kernel，编译过程可能会出现缺少命令的报错，大概是下面这几个
sudo apt update sudo apt install flex bison bc libncurses-dev目前linux主线的最新版本并没有适配t113的相关外设驱动，虽然能启动并串口打印，但其他的一些外设并没有驱动，还不是可用的状态，所以这里选择全志D1的kernel进行修改。
https://github.com/smaeul/linux/tree/d1/allunzip linux-d1-all.zip cd linux-d1-all应用awboot提供的linux补丁
linux/allow_select_d1_ccu_on_t113.patch linux/ccu-sun20i-make_cpux_clk_critical_for_t113.patch linux/second_core_support_in_platsmp.patch linux/d1s_t113_can_bus.patch在arch\arm\configs\sunxi_defconfig中添加D1时钟
CONFIG_SUN20I_D1_CCU=y CONFIG_SUN20I_D1_R_CCU=y添加sun8i-t113.dtsi和sun8i-t113-mangopi-dual.dts设备树配置文件到arch\arm\boot\dts
在arch\arm\boot\dts\Makefile的line:1389 处，CONFIG_MACH_SUN8I配置中添加sun8i-t113-mangopi-dual.dtbawboot提供的sun8i-t113-mangopi-dual.dts设备树文件调试终端串口是5，需要改成uart0。
make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- sunxi_defconfig make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- zImage -j4 make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- dtbs xfel spinand write 0x40000 arch/arm/boot/dts/sun8i-t113-mangopi-dual.dtb xfel spinand write 0x80000 arch/arm/boot/zImage
复位，串口成功打印内核信息，目前spinand中还没有文件系统，所以系统无法启动成功。
5、构建ubi文件系统
接下来是构建文件系统，这里使用最新的buildroot
https://buildroot.org/downloads/buildroot-2022.11.tar.gztar xf buildroot-2022.11.tar.gz
cd buildroot-2022.11
make menuconfig
配置目标指令集类型
配置外部自定义编译器
配置生成文件系统类型为ubifs，最大逻辑擦除块数量决定了spinand的容量，我这里是128M的spinand，所以128M/128k = 1024
上面的这些配置操作可以用下面的默认配置文件代替，在configs文件夹创建sunxi_t113_spinand_defconfig文件，添加下面内容，使用make sunxi_t113_spinand_defconfig载入配置。
# architecture BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y # Toolchain BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y BR2_TOOLCHAIN_EXTERNAL_PATH="/home/wsl/arm-none-linux-gnueabihf" BR2_TOOLCHAIN_EXTERNAL_GLIBC=y BR2_TOOLCHAIN_EXTERNAL_PREFIX="arm-none-linux-gnueabihf" BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-none-linux-gnueabihf" BR2_TOOLCHAIN_EXTERNAL_GCC_12=y BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_20=y BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y # BR2_TOOLCHAIN_EXTERNAL_INET_RPC is not set BR2_TOOLCHAIN_EXTERNAL_CXX=y # system # kernel # bootloader # filesystem / image BR2_TARGET_ROOTFS_UBI=y BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x20000 BR2_TARGET_ROOTFS_UBI_SUBSIZE=0 BR2_TARGET_ROOTFS_UBIFS=y BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x800 BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=1024 BR2_TARGET_ROOTFS_UBIFS_OPTS="-F"配置完成后make开始编译，接下来就是漫长的下载编译过程，大概需要半小时。
编译成功后会生成output/images/rootfs.ubi，使用xfel命令写入。xfel spinand erase 0x800000 0x7800000
xfel spinand write 0x800000 output/images/rootfs.ubi
复位发现没有启动成功，原来内核默认没有打开mtd和ubi支持，在内核配置添加下面选项Device Drivers -> Memory Technology Device (MTD) support -> NAND -> SPI NAND device Support
Device Drivers -> Memory Technology Device (MTD) support -> Enable UBI - Unsorted block images
File Systems -> Miscellaneous filesystems -> UBIFS file system support
或者在arch\arm\configs\sunxi_defconfig中添加CONFIG_MTD=y
CONFIG_MTD_SPI_NAND=y
CONFIG_MTD_UBI=y
CONFIG_UBIFS_FS=y
后重新载入配置。另外设备树中的启动参数和分区也需要修改
bootargs = "mem=128M ubi.mtd=3 rootfstype=ubifs root=ubi0:rootfs rw rootwait console=ttyS0,115200"; &spi0 { pinctrl-0 = <&spi0_pins>; pinctrl-names = "default"; status = "okay"; spi_nand: spi_nand@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; reg = <0>; partition@0 { label = "awboot"; reg = <0x0 0x40000>; /* 256K */ read-only; }; partition@40000 { label = "dtb"; reg = <0x40000 0x40000>; /* 256k */ read-only; }; partition@80000 { label = "kernel"; reg = <0x80000 0x780000>; /* 7.5MB */ read-only; }; partition@800000 { label = "rootfs"; reg = <0x800000 0x7800000>; }; }; };修改完后重新写入spi-nand，系统顺利启动，一个标准linux 6.1的基础busybox文件系统就做好了，可以根据不同应用可在buildroot添加所需的命令，下面是我常用的一些命令，总之非常方便。
make menuconfig System configuration ---> [*] Enable root login with password Target packages ---> Networking applications ---> dropbear Target packages ---> Libraries ---> Hardware handling ---> tslib Target packages ---> Text editors and viewers ---> nano Target packages ---> System tools ---> htop iperf3 coremark dhrystone make busybox-menuconfig Archival Utilities ---> Make tar xxx, Autodetect compressed tarballs Linux System Utilities ---> Support mounting CIFS/SMB file systems Networking Utilities ---> httpd Networking Utilities ---> ntpd Networking Utilities ---> udhcpd Process Utilities ---> Support thread display in ps/pstree/top Process Utilities ---> pgrep Process Utilities ---> pmap Process Utilities ---> Show the number of users完整启动日志
[I] AWBoot r6143 starting... [I] SPI-NAND: W25N01GV detected [I] SPI-NAND: read dt blob of size 22242 at 43.00MB/S [I] SPI-NAND: read Image of size 5424416 at 49.00MB/S [I] booting linux... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-rc3 (wsl@DESKTOP-NQRKTHB) (arm-none-linux-gnueabihf-gcc (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 12.2.1 20221205, GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.1210) #7 SMP Fri Dec 30 18:52:12 CST 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MangoPi MQ-Dual [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 16 MiB at 0x47000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000047ffffff] [ 0.000000] percpu: Embedded 11 pages/cpu s15764 r8192 d21100 u45056 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: mem=128M ubi.mtd=3 rootfstype=ubifs root=ubi0:rootfs rw rootwait console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 99804K/131072K available (8192K kernel code, 952K rwdata, 2188K rodata, 1024K init, 270K bss, 14884K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000013] Switching to timer-based delay loop, resolution 41ns [ 0.000188] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000681] Console: colour dummy device 80x30 [ 0.000724] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000740] pid_max: default: 32768 minimum: 301 [ 0.000901] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.000916] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001461] CPU: Testing write buffer coherency: ok [ 0.001766] /cpus/cpu@0 missing clock-frequency property [ 0.001795] /cpus/cpu@1 missing clock-frequency property [ 0.001805] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002581] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.002720] rcu: Hierarchical SRCU implementation. [ 0.002725] rcu: Max phase no-delay instances is 1000. [ 0.003261] smp: Bringing up secondary CPUs ... [ 0.003971] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004097] smp: Brought up 1 node, 2 CPUs [ 0.004107] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.004114] CPU: All CPU(s) started in SVC mode. [ 0.004635] devtmpfs: initialized [ 0.008727] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.008927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.008951] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.009546] pinctrl core: initialized pinctrl subsystem [ 0.010921] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.011968] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.012787] thermal_sys: Registered thermal governor 'step_wise' [ 0.012969] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.012981] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.020855] platform 5460000.tcon-top: Fixing up cyclic dependency with 5200000.mixer [ 0.020919] platform 5460000.tcon-top: Fixing up cyclic dependency with 5100000.mixer [ 0.021185] platform 5461000.lcd-controller: Fixing up cyclic dependency with 5460000.tcon-top [ 0.021537] platform 5470000.lcd-controller: Fixing up cyclic dependency with 5604000.tv-encoder [ 0.021593] platform 5470000.lcd-controller: Fixing up cyclic dependency with 5460000.tcon-top [ 0.022352] platform 7090000.rtc: Fixing up cyclic dependency with 7010000.clock-controller [ 0.032234] SCSI subsystem initialized [ 0.032716] usbcore: registered new interface driver usbfs [ 0.032754] usbcore: registered new interface driver hub [ 0.032791] usbcore: registered new device driver usb [ 0.032977] mc: Linux media interface: v0.10 [ 0.033022] videodev: Linux video capture interface: v2.00 [ 0.033106] pps_core: LinuxPPS API ver. 1 registered [ 0.033112] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.033127] PTP clock support registered [ 0.033547] Advanced Linux Sound Architecture Driver Initialized. [ 0.034416] clocksource: Switched to clocksource arch_sys_counter [ 0.041644] NET: Registered PF_INET protocol family [ 0.041849] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.042389] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.042417] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.042428] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.042444] TCP bind hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.042479] TCP: Hash tables configured (established 1024 bind 1024) [ 0.042567] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.042599] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.042749] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.043429] RPC: Registered named UNIX socket transport module. [ 0.043443] RPC: Registered udp transport module. [ 0.043447] RPC: Registered tcp transport module. [ 0.043450] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.044815] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.049789] NFS: Registering the id_resolver key type [ 0.049854] Key type id_resolver registered [ 0.049858] Key type id_legacy registered [ 0.050022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.050031] io scheduler mq-deadline registered [ 0.050036] io scheduler kyber registered [ 0.108727] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.118865] CAN device driver interface [ 0.122269] sun6i-rtc 7090000.rtc: registered as rtc0 [ 0.122395] sun6i-rtc 7090000.rtc: setting system clock to 1970-01-02T00:00:00 UTC (86400) [ 0.122514] sun6i-rtc 7090000.rtc: RTC enabled [ 0.122857] i2c_dev: i2c /dev entries driver [ 0.124723] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.125850] sun8i-ce 3040000.crypto: Set mod clock to 300000000 (300 Mhz) from 400000000 (400 Mhz) [ 0.126215] sun8i-ce 3040000.crypto: will run requests pump with realtime priority [ 0.126553] sun8i-ce 3040000.crypto: will run requests pump with realtime priority [ 0.126774] sun8i-ce 3040000.crypto: will run requests pump with realtime priority [ 0.126977] sun8i-ce 3040000.crypto: will run requests pump with realtime priority [ 0.127118] sun8i-ce 3040000.crypto: Register cbc(aes) [ 0.127146] sun8i-ce 3040000.crypto: Register ecb(aes) [ 0.127157] sun8i-ce 3040000.crypto: Register cbc(des3_ede) [ 0.127166] sun8i-ce 3040000.crypto: Register ecb(des3_ede) [ 0.127195] sun8i-ce 3040000.crypto: CryptoEngine Die ID 0 [ 0.128073] usbcore: registered new interface driver usbhid [ 0.128082] usbhid: USB HID core driver [ 0.130773] NET: Registered PF_PACKET protocol family [ 0.130787] can: controller area network core [ 0.130861] NET: Registered PF_CAN protocol family [ 0.130869] can: raw protocol [ 0.130876] can: broadcast manager protocol [ 0.130885] can: netlink gateway - max_hops=1 [ 0.130991] Key type dns_resolver registered [ 0.131078] Registering SWP/SWPB emulation handler [ 0.151942] sun20i-d1-pinctrl 2000000.pinctrl: initialized sunXi PIO driver [ 0.153211] printk: console [ttyS0] disabled [ 0.173477] 2500000.serial: ttyS0 at MMIO 0x2500000 (irq = 231, base_baud = 1500000) is a 16550A [ 0.980691] printk: console [ttyS0] enabled [ 0.987508] spi-nand spi0.0: Winbond SPI NAND was found. [ 0.992841] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 1.001736] 4 fixed-partitions partitions found on MTD device spi0.0 [ 1.008126] Creating 4 MTD partitions on "spi0.0": [ 1.012920] 0x000000000000-0x000000040000 : "awboot" [ 1.018743] 0x000000040000-0x000000080000 : "dtb" [ 1.024176] 0x000000080000-0x000000800000 : "kernel" [ 1.038649] 0x000000800000-0x000008000000 : "rootfs" [ 1.194220] phy phy-4100400.phy.0: Changing dr_mode to 1 [ 1.195527] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.199603] ehci-platform 4101000.usb: EHCI Host Controller [ 1.209317] musb-hdrc musb-hdrc.2.auto: MUSB HDRC host driver [ 1.214352] ehci-platform 4101000.usb: new USB bus registered, assigned bus number 1 [ 1.220112] musb-hdrc musb-hdrc.2.auto: new USB bus registered, assigned bus number 2 [ 1.236616] hub 2-0:1.0: USB hub found [ 1.236719] ehci-platform 4200000.usb: EHCI Host Controller [ 1.240434] hub 2-0:1.0: 1 port detected [ 1.247931] ohci-platform 4200400.usb: Generic Platform OHCI controller [ 1.256590] ohci-platform 4200400.usb: new USB bus registered, assigned bus number 3 [ 1.264527] ehci-platform 4101000.usb: irq 233, io mem 0x04101000 [ 1.270652] ehci-platform 4200000.usb: new USB bus registered, assigned bus number 4 [ 1.270760] ohci-platform 4200400.usb: irq 237, io mem 0x04200400 [ 1.286255] ehci-platform 4200000.usb: irq 235, io mem 0x04200000 [ 1.292563] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.294477] ehci-platform 4101000.usb: USB 2.0 started, EHCI 1.00 [ 1.303231] ubi0: attaching mtd3 [ 1.308189] hub 1-0:1.0: USB hub found [ 1.312277] hub 1-0:1.0: 1 port detected [ 1.322619] sunxi-mmc 4020000.mmc: initialized, max. request size: 2047 KB, uses new timings mode [ 1.334453] ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00 [ 1.341315] hub 4-0:1.0: USB hub found [ 1.345162] hub 4-0:1.0: 1 port detected [ 1.359176] hub 3-0:1.0: USB hub found [ 1.362978] hub 3-0:1.0: 1 port detected [ 1.444542] ohci-platform 4101400.usb: Generic Platform OHCI controller [ 1.451202] ohci-platform 4101400.usb: new USB bus registered, assigned bus number 5 [ 1.459287] ohci-platform 4101400.usb: irq 236, io mem 0x04101400 [ 1.539278] hub 5-0:1.0: USB hub found [ 1.543116] hub 5-0:1.0: 1 port detected [ 1.574453] random: crng init done [ 2.100239] ubi0: scanning is finished [ 2.114539] ubi0: attached mtd3 (name "rootfs", size 120 MiB) [ 2.120305] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.127199] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.133981] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.140952] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0 [ 2.146964] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.154178] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2041766426 [ 2.163310] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 20 [ 2.172542] ubi0: background thread "ubi_bgt0d" started, PID 85 [ 2.172894] ALSA device list: [ 2.181451] No soundcards found. [ 2.186632] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 2.192477] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 86 [ 2.249179] UBIFS (ubi0:0): recovery needed [ 2.379732] UBIFS (ubi0:0): recovery completed [ 2.384300] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.391721] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.401642] UBIFS (ubi0:0): FS size: 117452800 bytes (112 MiB, 925 LEBs), max 1024 LEBs, journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.413554] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 2.419390] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 9AE4F0B9-2A05-4C7A-8644-AA2CE4D2FFF0, small LPT model [ 2.432511] VFS: Mounted root (ubifs filesystem) on device 0:13. [ 2.440323] devtmpfs: mounted [ 2.444496] Freeing unused kernel image (initmem) memory: 1024K [ 2.450581] Run /sbin/init as init processSB bus registered, assigned bus number 2 [ 1.228343] ehci-platform 4200000.usb: EHCI Host Controller [ 1.235904] hub 2-0:1.0: USB hub found [ 1.242613] ohci-platform 4200400.usb: Generic Platform OHCI controller [ 1.244554] hub 2-0:1.0: 1 port detected [ 1.255208] ehci-platform 4101000.usb: irq 233, io mem 0x04101000 [ 1.261339] ehci-platform 4200000.usb: new USB bus registered, assigned bus number 3 [ 1.264326] ohci-platform 4200400.usb: new USB bus registered, assigned bus number 4 [ 1.278588] ehci-platform 4200000.usb: irq 235, io mem 0x04200000 [ 1.284829] ehci-platform 4101000.usb: USB 2.0 started, EHCI 1.00 [ 1.284899] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.296563] ubi0: attaching mtd3 [ 1.300503] ohci-platform 4200400.usb: irq 237, io mem 0x04200400 [ 1.307274] hub 1-0:1.0: USB hub found [ 1.311088] hub 1-0:1.0: 1 port detected [ 1.315120] ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00 [ 1.320965] sunxi-mmc 4020000.mmc: initialized, max. request size: 2047 KB, uses new timings mode [ 1.322827] hub 3-0:1.0: USB hub found [ 1.333954] hub 3-0:1.0: 1 port detected [ 1.379177] hub 4-0:1.0: USB hub found [ 1.382997] hub 4-0:1.0: 1 port detected [ 1.444407] ohci-platform 4101400.usb: Generic Platform OHCI controller [ 1.451070] ohci-platform 4101400.usb: new USB bus registered, assigned bus number 5 [ 1.459134] ohci-platform 4101400.usb: irq 236, io mem 0x04101400 [ 1.539152] hub 5-0:1.0: USB hub found [ 1.542954] hub 5-0:1.0: 1 port detected [ 1.614309] random: crng init done [ 2.110704] ubi0: scanning is finished [ 2.124757] ubi0: attached mtd3 (name "rootfs", size 120 MiB) [ 2.130523] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.137436] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.144219] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.151185] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0 [ 2.157205] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 2.164431] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 2041766426 [ 2.173555] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 20 [ 2.183138] ALSA device list: [ 2.186140] No soundcards found. [ 2.186172] ubi0: background thread "ubi_bgt0d" started, PID 85 [ 2.197304] UBIFS (ubi0:0): Mounting in unauthenticated mode [ 2.203409] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 86 [ 2.318154] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 2.325610] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 2.335531] UBIFS (ubi0:0): FS size: 117452800 bytes (112 MiB, 925 LEBs), max 1024 LEBs, journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.347444] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB) [ 2.353272] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 9AE4F0B9-2A05-4C7A-8644-AA2CE4D2FFF0, small LPT model [ 2.366769] VFS: Mounted root (ubifs filesystem) on device 0:13. [ 2.374505] devtmpfs: mounted [ 2.378644] Freeing unused kernel image (initmem) memory: 1024K [ 2.384764] Run /sbin/init as init process Starting syslogd: OK Starting klogd: OK Running sysctl: OK Initializing random number generator: OK Saving random seed: OK Starting network: OK Welcome to Buildroot buildroot login: root # # uname -a Linux buildroot 6.1.0-rc3 #7 SMP Fri Dec 30 18:52:12 CST 2022 armv7l GNU/Linux # # cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : Generic DT based system Revision : 0000 Serial : 0000000000000000 # # cat /proc/mtd dev: size erasesize name mtd0: 00040000 00020000 "awboot" mtd1: 00040000 00020000 "dtb" mtd2: 00780000 00020000 "kernel" mtd3: 07800000 00020000 "rootfs" # # mount ubi0:rootfs on / type ubifs (rw,relatime,assert=read-only,ubi=0,vol=0) devtmpfs on /dev type devtmpfs (rw,relatime,size=49900k,nr_inodes=12475,mode=755) proc on /proc type proc (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=666) tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777) tmpfs on /tmp type tmpfs (rw,relatime) tmpfs on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) sysfs on /sys type sysfs (rw,relatime) # # df -h Filesystem Size Used Available Use% Mounted on ubi0:rootfs 102.9M 3.5M 99.5M 3% / devtmpfs 48.7M 0 48.7M 0% /dev tmpfs 57.2M 0 57.2M 0% /dev/shm tmpfs 57.2M 24.0K 57.2M 0% /tmp tmpfs 57.2M 16.0K 57.2M 0% /run # # time dd if=/dev/zero of=test.bin bs=1M count=64 conv=fsync 64+0 records in 64+0 records out real 0m 1.26s user 0m 0.00s sys 0m 0.48s # # # reboot # Stopping network: OK Saving random seed: OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only [ 123.118531] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to[ 125.165719] reboot: Restarting system编译启动能够如此顺利必定少不了各位大佬的付出，特此感谢 big_smile
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
如何判断 anti-brush bit 是否烧写？
因为只有 anti-brush bit 烧写后才能启动安全固件，所以如果是安全启动，anti-brush bit
就一定烧写了。安全启动过程中有一些特有的打印，如“sboot commit...”、“OLD version:...
”、“NEW version: ...”、“secure enable bit: 1”等等，可用来进行判断。如何判断 rotpk.bin 是否烧写？
反证法。烧录使用其他 key 签名的安全固件（安全版本号一致），如果不能启动，则表明已经烧写 rotpk。
sboot 启动 log 中如果有 “have rotpk, do check”，表明 rotpk.bin 已经烧写。
[89]HELLO! SBOOT is starting! [92]sboot commit : 88480af-dirty [95]set pll start [101]periph0 has been enabled [104]set pll end [106][pmu]: bus read error [108]board init ok [110]ZQ value = 0x2f [112]get_pmu_exist() = -1 [115]DRAM BOOT DRIVE INFO: V0.33 [118]DRAM CLK = 936 MHz [120]DRAM Type = 3 (2:DDR2,3:DDR3) [123]DRAMC read ODT off. [126]DRAM ODT value: 0x42. [128]ddr_efuse_type: 0xa [131]DRAM SIZE =128 M [133]dram_tpr4:0x0 [135]PLL_DDR_CTRL_REG:0xf8004d00 [138]DRAM_CLK_REG:0xc0000000 [141][TIMING DEBUG] MR2= 0x20 [145]DRAM simple test OK. [147]rtc standby flag is 0x0, super standby flag is 0x0 [152]dram size =128 [154]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32 [159]block from 8 to 32 [266]Check is correct. [268]dma 0x32cd8 int is not used yet [271]dma 0x32cd8 int is free, you do not need to free it again [277]OLD version: 0.0 [279]NEW version: 0.0 [282]have rotpk, do check [331]load rotpk hash [425]load boot-key hash [427]load boot hash [481]monitor entry=0x0 [483]uboot entry=0x43000000 [486]optee entry=0x41b00000 [489]opensbi entry=0x0 [491]no need rotpk flag [493]run out of boot0 M/TC: OP-TEE version: 6aef7bb2-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Jul 23 09:25:11 UTC 2021 arm U-Boot 2018.05-g24521d6-dirty (Dec 30 2022 - 16:57:32 +0800) Allwinner Technology [00.546]CPU: Allwinner Family [00.549]Model: sun8iw20 I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH ready [00.570]DRAM: 128 MiB [00.574]Relocation Offset is: 04ecc000 [00.598]secure enable bit: 1 [00.600]smc_tee_inform_fdt failed with: -65526[00.605]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz [00.611]gic: sec monitor mode [00.614]flash init start [00.616]workmode = 0,storage type = 0 sspi->base_addr = 0x4025000, the SPI control register: [VER] 0x4025000 = 0x00010001, [GCR] 0x4025004 = 0x00000083, [TCR] 0x4025008 = 0x00000184 [ICR] 0x4025010 = 0x00000f00, [ISR] 0x4025014 = 0x00000032, [FCR] 0x4025018 = 0x00200020 [FSR] 0x402501c = 0x00000000, [WCR] 0x4025020 = 0x00000000, [CCR] 0x4025024 = 0x00000002 [SDC] 0x4025028 = 0x00002000, [BCR] 0x4025030 = 0x00000000, [TCR] 0x4025034 = 0x00000000 [BCC] 0x4025038 = 0x20000000, [DMA] 0x4025088 = 0x000000e5 [00.663]sunxi-spinand-phy: not detect any munufacture from id table [00.670]sunxi-spinand-phy: get spi-nand Model from fdt fail [00.675]sunxi-spinand-phy: get phy info from fdt fail device nand0 <nand>, # parts = 4 #: name size offset mask_flags 0: boot0 0x00100000 0x00000000 1 1: uboot 0x00300000 0x00100000 1 2: secure_storage 0x00100000 0x00400000 1 3: sys 0x07b00000 0x00500000 0 active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000 defaults: mtdids : nand0=nand mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys) [00.792]ubi0: attaching mtd4 [00.897]ubi0: scanning is finished [00.904]ubi0: attached mtd4 (name "sys", size 123 MiB) [00.909]ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes [00.915]ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048 [00.921]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [00.927]ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0 [00.933]ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 [00.939]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 [00.947]ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20 [00.956]sunxi flash init ok [00.958]line:703 init_clocks [00.961]drv_disp_init fdt get node offset faill: hdmi [00.974]drv_disp_init finish [00.977]boot_gui_init:start [00.979]set disp.dev2_output_type fail. using defval=0 [01.116]set disp.fb0_width fail. using defval=0 [01.120]set disp.fb0_height fail. using defval=0 [01.124]boot_gu[01.126]smallwitpi lcd_panel_init 187 xxxxxxxxxxxxxxxxxx i_init:finish [01.419]LCD open finish partno erro : can't find partition bootloader 54 bytes read in 0 ms [01.489]bmp_name=bootlogo.bmp size 691254 691254 bytes read in 36 ms (18.3 MiB/s) [01.648]Loading Environment from SUNXI_FLASH... OK [01.669]Item0 (Map) magic is bad secure storage read widevine fail [01.675]secure storage read widevine fail with:-1 secure storage read ec_key fail [01.683]secure storage read ec_key fail with:-1 secure storage read ec_cert1 fail [01.690]secure storage read ec_cert1 fail with:-1 secure storage read ec_cert2 fail [01.697]secure storage read ec_cert2 fail with:-1 secure storage read ec_cert3 fail [01.705]secure storage read ec_cert3 fail with:-1 secure storage read rsa_key fail [01.712]secure storage read rsa_key fail with:-1 secure storage read rsa_cert1 fail [01.720]secure storage read rsa_cert1 fail with:-1 secure storage read rsa_cert2 fail [01.727]secure storage read rsa_cert2 fail with:-1 secure storage read rsa_cert3 fail [01.735]secure storage read rsa_cert3 fail with:-1 [01.739]out of usb burn from boot: not need burn key [01.755]update bootcmd [01.768]change working_fdt 0x43e8be70 to 0x43e6be70 [01.788]update dts Hit any key to stop autoboot: 0 pubkey boot valid [02.108]no vendor_boot partition is found Android's image name: t113-whycanpij [02.119]Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.61 (whycan@ubuntu) (arm-openwrt-linux-muslgnueabi-gcc.bin (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) 6.4.1, GNU ld (GNU Binutils) 2.27) #87 SMP PREEMPT Fri Dec 30 09:20:00 UTC 2022 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: sun8iw20 [ 0.000000] printk: bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 32 MiB at 0x46000000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440 [ 0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: ubi.mtd=sys ubi.block=0,rootfs earlyprintk=sunxi-uart,0x02500C00 clk_ignore_unused initcall_debug=0 console=ttyS3,115200 loglevel=8 root=/dev/ubiblock0_5 rootfstype=squashfs init=/pseudo_init partitions=mbr@ubi0_0:boot-resource@ubi0_1:env@ubi0_2:env-redund@ubi0_3:boot@ubi0_4:rootfs@ubi0_5:private@ubi0_6:rootfs_data@ubi0_7:UDISK@ubi0_8: cma=32M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun8iw20p1 boot_type=5 androidboot.boot_type=5 gpt=1 androidboot.verifiedbootstate=<NULL> uboot_message=2018.05-g24521d6-dirty(12/30/2022-16:57:32) disp_reserve=3686400,0x43f0f000 aw-ubi-spinand.ubootblks=24 androidboot.dramsize=128 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 81376K/131072K available (6144K kernel code, 292K rwdata, 1704K rodata, 1024K init, 1173K bss, 16928K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x264/0x3e8 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008017] Switching to timer-based delay loop, resolution 41ns [ 0.014186] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.023909] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.034285] pid_max: default: 32768 minimum: 301 [ 0.039026] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.046385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.054719] CPU: Testing write buffer coherency: ok [ 0.059951] /cpus/cpu@0 missing clock-frequency property [ 0.065275] /cpus/cpu@1 missing clock-frequency property [ 0.070631] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.076785] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.083459] rcu: Hierarchical SRCU implementation. [ 0.088668] smp: Bringing up secondary CPUs ... [ 0.094317] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.094437] smp: Brought up 1 node, 2 CPUs [ 0.104233] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.110438] CPU: All CPU(s) started in SVC mode. [ 0.115526] devtmpfs: initialized [ 0.130336] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.138460] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.148317] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.156466] pinctrl core: initialized pinctrl subsystem [ 0.162996] NET: Registered protocol family 16 [ 0.168947] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.211786] rtc_ccu: sunxi ccu init OK [ 0.217860] ccu: sunxi ccu init OK [ 0.221652] r_ccu: sunxi ccu init OK [ 0.267228] iommu: Default domain type: Translated [ 0.272309] sunxi iommu: irq = 24 [ 0.276786] SCSI subsystem initialized [ 0.280879] usbcore: registered new interface driver usbfs [ 0.286902] usbcore: registered new interface driver hub [ 0.292334] usbcore: registered new device driver usb [ 0.297633] videodev: Linux video capture interface: v2.00 [ 0.304158] Advanced Linux Sound Architecture Driver Initialized. [ 0.310943] Bluetooth: Core ver 2.22 [ 0.314620] NET: Registered protocol family 31 [ 0.319084] Bluetooth: HCI device and connection manager initialized [ 0.325770] Bluetooth: HCI socket layer initialized [ 0.330656] Bluetooth: L2CAP socket layer initialized [ 0.335766] Bluetooth: SCO socket layer initialized [ 0.340916] pwm module init! [ 0.345200] g2d 5410000.g2d: Adding to iommu group 0 [ 0.350604] G2D: rcq version initialized.major:252 [ 0.356312] clocksource: Switched to clocksource arch_sys_counter [ 0.370899] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver [ 0.380582] NET: Registered protocol family 2 [ 0.385487] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.393911] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.401666] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.408749] TCP: Hash tables configured (established 1024 bind 1024) [ 0.415208] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.421784] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.428964] NET: Registered protocol family 1 [ 0.434314] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator [ 0.444662] spi spi0: spi0 supply spi not found, using dummy regulator [ 0.451459] sunxi_spi_resource_get()2151 - [spi0] SPI MASTER MODE [ 0.457646] sunxi_spi_resource_get()2189 - Failed to get sample mode [ 0.464008] sunxi_spi_resource_get()2194 - Failed to get sample delay [ 0.470471] sunxi_spi_resource_get()2198 - sample_mode:-1431633921 sample_delay:-1431633921 [ 0.478873] sunxi_spi_clk_init()2240 - [spi0] mclk 100000000 [ 0.485149] sunxi_spi_probe()2653 - [spi0]: driver probe succeed, base c881f000, irq 41 [ 0.495175] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.509716] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.515727] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.548780] io scheduler mq-deadline registered [ 0.553319] io scheduler kyber registered [ 0.559376] [DISP]disp_module_init [ 0.563337] disp 5000000.disp: Adding to iommu group 0 [ 0.569104] [DISP] parser_disp_init_para,line:1430: [ 0.569108] of_property_read fb0_width fail [ 0.578192] [DISP] disp_init,line:2386: [ 0.578196] smooth display screen:0 type:1 mode:4 [ 0.603262] display_fb_request,fb_id:0 [ 0.613050] Freeing logo buffer memory: 3600K [ 0.617975] disp_al_manager_apply ouput_type:1 [ 0.622590] [DISP] lcd_clk_config,line:744: [ 0.622601] disp 0, clk: pll(396000000),clk(396000000),dclk(66000000) dsi_rate(66000000) [ 0.622601] clk real:pll(396000000),clk(396000000),dclk(99000000) dsi_rate(150000000) [ 0.626870] [DISP]disp_module_init finish [ 0.643628] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.648932] sunxi_sid_init()551 - insmod ok [ 0.662671] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator [ 0.672968] uart uart1: get regulator failed [ 0.677301] uart uart1: uart1 supply uart not found, using dummy regulator [ 0.684464] uart1: ttyS1 at MMIO 0x2500400 (irq = 34, base_baud = 1500000) is a SUNXI [ 0.692980] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator [ 0.703210] uart uart3: get regulator failed [ 0.707600] uart uart3: uart3 supply uart not found, using dummy regulator [ 0.714753] uart3: ttyS3 at MMIO 0x2500c00 (irq = 35, base_baud = 1500000) is a SUNXI [ 0.722630] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n ▒[ 0.730613] printk: console [ttyS3] enabled [ 0.730613] printk: console [ttyS3] enabled [ 0.739535] printk: bootconsole [earlycon0] disabled [ 0.739535] printk: bootconsole [earlycon0] disabled [ 0.751034] misc dump reg init [ 0.755554] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9 [ 0.762838] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed [ 0.770142] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed [ 0.777543] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1) [ 0.784031] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power. [ 0.790935] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1) [ 0.798626] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1 [ 0.806425] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1 [ 0.814484] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled [ 0.822099] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power. [ 0.828838] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1) [ 0.836326] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=141 assert=0 [ 0.843809] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator [ 0.855603] [ADDR_MGT] addr_mgt_probe: module version: v1.0.10 [ 0.862825] [ADDR_MGT] addr_mgt_probe: success. [ 0.868317] dma-buf: Running sanitycheck [ 0.872688] dma-buf: Running dma_fence [ 0.876901] sizeof(dma_fence)=48 [ 0.880604] dma-buf: Running dma_fence/sanitycheck [ 0.885945] dma-buf: Running dma_fence/test_signaling [ 0.891624] dma-buf: Running dma_fence/test_add_callback [ 0.897558] dma-buf: Running dma_fence/test_late_add_callback [ 0.903943] dma-buf: Running dma_fence/test_rm_callback [ 0.909774] dma-buf: Running dma_fence/test_late_rm_callback [ 0.916065] dma-buf: Running dma_fence/test_status [ 0.921399] dma-buf: Running dma_fence/test_error [ 0.926651] dma-buf: Running dma_fence/test_wait [ 0.931790] dma-buf: Running dma_fence/test_wait_timeout [ 0.976326] dma-buf: Running dma_fence/test_stub [ 0.981479] dma-buf: Running dma_fence/race_signal_callback [ 1.056337] thread_signal_callback[0] completed 36911 passes, 81 misses [ 1.063731] thread_signal_callback[1] completed 36925 passes, 96 misses [ 1.136320] thread_signal_callback[0] completed 40806 passes, 40806 misses [ 1.144000] thread_signal_callback[1] completed 40759 passes, 40758 misses [ 1.152224] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228 [ 1.159535] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306 [ 1.167456] sunxi-spinand-phy: not detect any munufacture from id table [ 1.174822] sunxi-spinand-phy: get spi-nand Model from fdt fail [ 1.181424] sunxi-spinand-phy: get phy info from fdt fail [ 1.187439] sunxi-spinand-phy: not detect munufacture from fdt [ 1.194045] sunxi-spinand-phy: detect munufacture from id table: Winbond [ 1.201509] sunxi-spinand-phy: detect spinand id: ff21aaef ffffffff [ 1.208495] sunxi-spinand-phy: ========== arch info ========== [ 1.214978] sunxi-spinand-phy: Model: W25N01GVZEIG [ 1.221666] sunxi-spinand-phy: Munufacture: Winbond [ 1.227874] sunxi-spinand-phy: DieCntPerChip: 1 [ 1.233484] sunxi-spinand-phy: BlkCntPerDie: 1024 [ 1.239397] sunxi-spinand-phy: PageCntPerBlk: 64 [ 1.245114] sunxi-spinand-phy: SectCntPerPage: 4 [ 1.250743] sunxi-spinand-phy: OobSizePerPage: 64 [ 1.256466] sunxi-spinand-phy: BadBlockFlag: 0x0 [ 1.262278] sunxi-spinand-phy: OperationOpt: 0x7 [ 1.268099] sunxi-spinand-phy: MaxEraseTimes: 65000 [ 1.274101] sunxi-spinand-phy: EccFlag: 0x0 [ 1.279927] sunxi-spinand-phy: EccType: 2 [ 1.285544] sunxi-spinand-phy: EccProtectedType: 3 [ 1.291165] sunxi-spinand-phy: ======================================== [ 1.298547] sunxi-spinand-phy: [ 1.302036] sunxi-spinand-phy: ========== physical info ========== [ 1.308933] sunxi-spinand-phy: TotalSize: 128 M [ 1.314258] sunxi-spinand-phy: SectorSize: 512 B [ 1.319655] sunxi-spinand-phy: PageSize: 2 K [ 1.324787] sunxi-spinand-phy: BlockSize: 128 K [ 1.330148] sunxi-spinand-phy: OOBSize: 64 B [ 1.335379] sunxi-spinand-phy: ======================================== [ 1.342752] sunxi-spinand-phy: [ 1.346239] sunxi-spinand-phy: ========== logical info ========== [ 1.353029] sunxi-spinand-phy: TotalSize: 128 M [ 1.358364] sunxi-spinand-phy: SectorSize: 512 B [ 1.363693] sunxi-spinand-phy: PageSize: 4 K [ 1.368831] sunxi-spinand-phy: BlockSize: 256 K [ 1.374152] sunxi-spinand-phy: OOBSize: 128 B [ 1.379500] sunxi-spinand-phy: ======================================== [ 1.386954] sunxi-spinand-phy: block lock register: 0x00 [ 1.393016] sunxi-spinand-phy: feature register: 0x19 [ 1.398646] sunxi-spinand-phy: sunxi physic nand init end [ 1.405014] Creating 4 MTD partitions on "sunxi_mtd_nand": [ 1.411169] 0x000000000000-0x000000100000 : "boot0" [ 1.427262] 0x000000100000-0x000000400000 : "uboot" [ 1.436221] random: fast init done [ 1.447264] 0x000000400000-0x000000500000 : "secure_storage" [ 1.467253] 0x000000500000-0x000008000000 : "sys" [ 1.688037] libphy: Fixed MDIO Bus: probed [ 1.693495] sunxi gmac driver's version: 1.0.0 [ 1.698636] gmac-power0: NULL [ 1.701935] gmac-power1: NULL [ 1.705230] gmac-power2: NULL [ 1.709578] Failed to alloc md5 [ 1.713079] eth0: Use random mac address [ 1.717779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.725041] sunxi-ehci: EHCI SUNXI driver [ 1.729988] get ehci0-controller wakeup-source is fail. [ 1.735898] sunxi ehci0-controller don't init wakeup source [ 1.742120] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0b65538, 0x:c8881000, irq_no:3c [ 1.754027] [sunxi-ehci0]: Not init ehci0 [ 1.758776] get ehci1-controller wakeup-source is fail. [ 1.764673] sunxi ehci1-controller don't init wakeup source [ 1.770891] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0b65a58, 0x:c8885000, irq_no:3e [ 1.782826] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator [ 1.795234] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator [ 1.807325] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller [ 1.814531] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1 [ 1.824482] sunxi-ehci 4200000.ehci1-controller: irq 62, io mem 0x04200000 [ 1.856339] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00 [ 1.864969] hub 1-0:1.0: USB hub found [ 1.869212] hub 1-0:1.0: 1 port detected [ 1.874223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.881152] sunxi-ohci: OHCI SUNXI driver [ 1.886105] get ohci0-controller wakeup-source is fail. [ 1.892045] sunxi ohci0-controller don't init wakeup source [ 1.898262] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0b657c8 [ 1.907851] [sunxi-ohci0]: Not init ohci0 [ 1.912580] get ohci1-controller wakeup-source is fail. [ 1.918504] sunxi ohci1-controller don't init wakeup source [ 1.924708] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0b65ce8 [ 1.934326] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator [ 1.946753] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator [ 1.958859] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller [ 1.966071] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2 [ 1.975887] sunxi-ohci 4200400.ohci1-controller: irq 63, io mem 0x04200400 [ 2.051188] hub 2-0:1.0: USB hub found [ 2.055402] hub 2-0:1.0: 1 port detected [ 2.060601] i2c /dev entries driver [ 2.064585] sunxi cedar version 1.1 [ 2.068693] sunxi-cedar 1c0e000.ve: Adding to iommu group 0 [ 2.074928] VE: sunxi_cedar_probe power-domain init!!! [ 2.080665] VE: install start!!! [ 2.080665] [ 2.086170] VE: cedar-ve the get irq is 42 [ 2.086170] [ 2.092580] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval) [ 2.092580] [ 2.101795] VE: install end!!! [ 2.101795] [ 2.106838] VE: sunxi_cedar_probe [ 2.110815] Bluetooth: HCI UART driver ver 2.3 [ 2.115756] Bluetooth: HCI UART protocol H4 registered [ 2.121495] Bluetooth: HCI UART protocol BCSP registered [ 2.127417] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10 [ 2.134569] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1 [ 2.140932] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1 [ 2.147455] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled! [ 2.147455] [ 2.156064] [XR_BT_LPM] bluesleep_probe: uart_index(1) [ 2.164088] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02) [ 2.174002] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 [ 2.180172] sunxi-mmc 4020000.sdmmc: No vmmc regulator found [ 2.186484] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found [ 2.192871] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found [ 2.199269] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found [ 2.205755] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found [ 2.212250] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found [ 2.218744] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found [ 2.225659] sunxi-mmc 4020000.sdmmc: Got CD GPIO [ 2.230978] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail [ 2.237609] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.248690] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator [ 2.268766] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.293088] sunxi-mmc 4020000.sdmmc: detmode:gpio irq [ 2.298752] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 2.306908] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02) [ 2.319742] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 [ 2.325895] sunxi-mmc 4021000.sdmmc: No vmmc regulator found [ 2.332222] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found [ 2.338627] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found [ 2.345010] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found [ 2.351513] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found [ 2.358009] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found [ 2.364501] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found [ 2.371014] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed [ 2.380336] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.391429] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator [ 2.411538] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.435686] sunxi-mmc 4021000.sdmmc: detmode:manually by software [ 2.443311] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 2.450473] sunxi_led_probe()1751 - start [ 2.454945] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 2.461776] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.466365] sunxi_get_str_of_property()1597 - failed to get the string of propname led_regulator! [ 2.476343] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.483192] sunxi_register_led_classdev()1485 - led_classdev start [ 2.496850] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.502632] sunxi_led_probe()1847 - finish [ 2.509508] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.513219] usbcore: registered new interface driver usbkbd [ 2.520584] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.525807] usbcore: registered new interface driver usbmouse [ 2.533357] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.538835] exFAT: Version 1.3.0 [ 2.545538] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 2.551211] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1 [ 2.551211] [ 2.577235] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0 [ 2.588523] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished [ 2.597693] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present! [ 2.607470] [SNDCODEC][sunxi_card_init][583]:card init finished [ 2.614539] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok [ 2.625433] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0 [ 2.637437] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished [ 2.646595] NET: Registered protocol family 10 [ 2.652623] Segment Routing with IPv6 [ 2.656762] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch [ 2.664168] NET: Registered protocol family 17 [ 2.669288] Bluetooth: RFCOMM TTY layer initialized [ 2.674730] Bluetooth: RFCOMM socket layer initialized [ 2.680587] Bluetooth: RFCOMM ver 1.11 [ 2.685474] Registering SWP/SWPB emulation handler [ 2.705336] sunxi-i2c sunxi-i2c0: sunxi-i2c0 supply twi not found, using dummy regulator [ 2.715369] sunxi-i2c sunxi-i2c0: probe success [ 2.722731] ubi0: attaching mtd3 [ 2.982486] random: crng init done [ 3.024909] ubi0: scanning is finished [ 3.040171] ubi0: attached mtd3 (name "sys", size 123 MiB) [ 3.046277] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes [ 3.053951] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048 [ 3.061516] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 3.069266] ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0 [ 3.075944] ubi0: user volume: 9, internal volumes: 1, max. volumes count: 128 [ 3.083994] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0 [ 3.093292] ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20 [ 3.103570] ubi0: background thread "ubi_bgt0d" started, PID 907 [ 3.111495] block ubiblock0_5: created from ubi0:5(rootfs) [ 3.120462] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.126389] clk: Not disabling unused clocks [ 3.130098] cfg80211: failed to load regulatory.db [ 3.134823] ALSA device list: [ 3.143437] #0: audiocodec [ 3.146700] alloc_fd: slot 0 not NULL! [ 3.154297] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 3.164553] devtmpfs: mounted [ 3.169860] Freeing unused kernel memory: 1024K [ 3.206447] Run /pseudo_init as init process mount: mounting none on /dev failed: Resource busy [ 3.419778] UBIFS (ubi0:7): Mounting in unauthenticated mode [ 3.426204] UBIFS (ubi0:7): background thread "ubifs_bgt0_7" started, PID 944 [ 3.507710] UBIFS (ubi0:7): recovery needed [ 3.629165] UBIFS (ubi0:7): recovery completed [ 3.634232] UBIFS (ubi0:7): UBIFS: mounted UBI device 0, volume 7, name "rootfs_data" [ 3.642978] UBIFS (ubi0:7): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 3.654018] UBIFS (ubi0:7): FS size: 43352064 bytes (41 MiB, 168 LEBs), journal size 2064385 bytes (1 MiB, 8 LEBs) [ 3.665539] UBIFS (ubi0:7): reserved for root: 2047624 bytes (1999 KiB) [ 3.672905] UBIFS (ubi0:7): media format: w5/r0 (latest is w5/r0), UUID 666D6CE4-87B8-4FAD-ACEA-AE9FDFC0CEC8, small LPT model can't run '/etc/preinit': No such file or directory mount: mounting proc on /proc failed: Resource busy hostname: can't open '/etc/hostname': No such file or directory ------run rc.preboot file----- [ 3.808674] UBIFS (ubi0:8): Mounting in unauthenticated mode [ 3.815109] UBIFS (ubi0:8): background thread "ubifs_bgt0_8" started, PID 973 [ 3.926193] UBIFS (ubi0:8): UBIFS: mounted UBI device 0, volume 8, name "UDISK" [ 3.934364] UBIFS (ubi0:8): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes [ 3.945427] UBIFS (ubi0:8): FS size: 6451200 bytes (6 MiB, 25 LEBs), journal size 2064385 bytes (1 MiB, 6 LEBs) [ 3.956672] UBIFS (ubi0:8): reserved for root: 304706 bytes (297 KiB) [ 3.963836] UBIFS (ubi0:8): media format: w5/r0 (latest is w5/r0), UUID F8A2B032-4867-4AEF-BF86-67BFD7817832, small LPT model ------run rc.modules file----- [ 4.109940] usbcore: registered new interface driver usb-storage [ 4.120725] sunxi_gpadc_init,2151, success [ 4.125637] sunxi_gpadc_setup: get channel scan data failed [ 4.132432] input: sunxi-gpadc0 as /devices/virtual/input/input1 [ 4.147926] get ctp_power is fail, -22 [ 4.152118] get ctp_power_ldo_vol is fail, -22 [ 4.157167] sunxi_ctp_startup: ctp_power_io is invalid. [ 4.163011] get ctp_gesture_wakeup fail, no gesture wakeup [ 4.169143] gt9xxnew_ts 0-0014: 0-0014 supply ctp not found, using dummy regulator [ 4.336455] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.344521] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.352210] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.360264] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.367944] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.375995] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.383670] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.391721] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.399411] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.407468] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.415028] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset. [ 4.576319] <<-GTP-ERROR->> GTP i2c test failed time 1. [ 4.606430] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.614482] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.622149] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.630202] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.637878] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.645934] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.653616] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.661663] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.669338] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.677392] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.684942] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset. [ 4.846318] <<-GTP-ERROR->> GTP i2c test failed time 2. [ 4.876429] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.884482] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.892153] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.900212] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.907887] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.915938] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.923610] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.931667] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.939343] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 4.947396] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 4.954946] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset. [ 5.116335] <<-GTP-ERROR->> GTP i2c test failed time 3. [ 5.146431] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.154483] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.162155] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.170208] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.177884] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.185938] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.193613] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.201662] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.209340] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.217395] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.224942] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset. [ 5.386319] <<-GTP-ERROR->> GTP i2c test failed time 4. [ 5.416433] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.424495] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.432173] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.440226] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.447901] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.455953] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.463626] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.471684] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.479361] sunxi-i2c sunxi-i2c0: SLA+W has been transmitted; ACK not received [ 5.487420] sunxi-i2c sunxi-i2c0: engine-mode: xfer failed(dev addr:0x14) [ 5.494975] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset. [ 5.656318] <<-GTP-ERROR->> GTP i2c test failed time 5. [ 5.686315] I2C communication ERROR! [ 5.686344] regulator-dummy: Underflow of regulator enable count [ 5.697217] gt9xxnew_ts: probe of 0-0014 failed with error -1 [ 5.798694] Error: Driver 'gt9xxnew_ts' is already registered, aborting... insmod: can't insert '/lib/modules/5.4.61/gt9xxnew_ts.ko': Operation not permitted [ 5.978071] ======== XRADIO WIFI OPEN ======== [ 5.983541] [XRADIO] Driver Label:XR_V02.16.85_P2P_HT40_01.31 [ 5.990298] [XRADIO] Allocated hw_priv @ 6a6dd56c [ 5.996120] sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1 [ 6.012417] sunxi-rfkill soc@3000000:rfkill@0: wlan power on success [ 6.219546] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 6.230595] [XRADIO] Detect SDIO card 1 [ 6.245050] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator [ 6.265188] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 6.289968] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 6.304469] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 6.326548] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 6.338060] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 6.349797] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B [ 6.362401] mmc1: new high speed SDIO card at address 0001 [ 6.369022] [SBUS] XRadio Device:sdio clk=50000000 [ 6.383775] [XRADIO] XRADIO_HW_REV 1.0 detected. [ 6.466734] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000. [ 6.498652] [XRADIO] Bootloader complete [ 6.586371] [XRADIO] Firmware completed. [ 6.592491] [WSM] Firmware Label:XR_C09.08.52.73_DBG_02.122 2GHZ HT40 May 18 2021 13:36:09 [ 6.601826] [XRADIO] Firmware Startup Done. [ 6.606861] [XRADIO_WRN] enable Multi-Rx! [ 6.612100] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.716639] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator Successfully initialized wpa_supplicant [ 6.833756] ieee80211_do_open: vif_type=2, p2p=0, ch=3, addr=14:4f:45:4b:74:5d [ 6.841893] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0, addr=14:4f:45:4b:74:5d [ 6.857334] [AP_WRN] BSS_CHANGED_ASSOC but driver is unjoined. ------run rc.final file----- numid=30,iface=MIXER,name='Headphone Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on ------light up RGB LED----- [ 7.094079] file system registered [ 7.111625] configfs-gadget 4100000.udc-controller: failed to start g1: -19 sh: write error: No such device [ 7.134424] read descriptors [ 7.137781] read strings [ 7.382009] android_work: sent uevent USB_STATE=CONNECTED [ 7.479380] configfs-gadget gadget: high-speed config #1: c [ 7.485687] android_work: sent uevent USB_STATE=CONFIGURED ------light up LED----- BusyBox v1.27.2 () built-in shell (ash) ------run profile file----- _____ _ __ _ |_ _||_| ___ _ _ | | |_| ___ _ _ _ _ | | _ | || | | |__ | || || | ||_'_| | | | || | || _ | |_____||_||_|_||___||_,_| |_| |_||_|_||_|_| Tina is Based on OpenWrt! ---------------------------------------------- Tina Linux (Neptune, 61CC0487) ---------------------------------------------- Wed Jun 1 00:00:00 GMT 2022 nodev debugfs root@TinaLinux:/# [ 33.156354] usb1-vbus: disabling各镜像在哪个阶段进行校验？
默认配置情况下，会对 sboot、opensbi、u-boot、kernel 进行校验。
brom 运行阶段对 sboot 进行校验。如果 sboot 能启动，表明已经经过了校验。
sboot 运行阶段对 opensbi 与 u-boot 进行校验。
uboot 运行阶段会对 kernel 进行校验。
-
回复: T113-S3 / V853 安全固件学习记录发布在 其它全志芯片讨论区
①执行 ./scripts/createkeys 生成密钥
②生成安全固件：pack -s ==> tina_t113-whycanpij_uart3_secure_v0.img用 PhoenixSuit.exe 烧录上面的安全固件，用dragonsn.exe烧录out/板级目录/keys/rotpk.bin
-
回复: V536H用的哪个uboot发布在 编译和烧写问题专区
@jinxiangwzh
不好意思，看成了chip id error这个是DDR 初始化出错,检查DDR配置，型号与开发板是否一致，有没有焊妥．
-
回复: T113开发资料下载发布在 其它全志芯片讨论区
分享T113资料，百度网盘：
https://pan.baidu.com/s/1h-yRCvY3I7fhlVL9tVIfvw?pwd=awol
提取码:awol--来自百度网盘超级会员V4的分享
