下面是修改的makefile:
是我修改的位置不对吗,麻烦各位指点下!!!
wyljkl 发布的最佳帖子
-
tina系统,想要使用gdb调试应用程序,在makefile中加入-g参数,生成的执行程序一直debug 符号链接,这是怎么回事?
-
回复: t113 tina linux 内核开机logo不显示
你们使用的是官方的tina sdk吗?如果是的,首先你得确保lcd驱动是好的,再者,显示开机logo需要再uboot里面也加上lcd的配置,才会有logo显示的。
wyljkl 发布的最新帖子
-
请问一下,t113-i tina系统procd-init 怎么更换为busybox-init
请问一下,t113-i tina系统procd-init 怎么更换为busybox-init :
在文档中找到下面方式,但是编译会报错,
有弄过的大佬指点下,感谢!!! -
回复: 100s tina 32bit frambuffer怎么变成16bit,tina 的disp框架有点大,不知道在哪个地方修改
- f1c100s\tina\lichee\linux-3.10\drivers\video\sunxi\disp\disp\dev_fb.c
文件中的frambuffer配置改一下
2.fbx format 配置改一下
- f1c100s\tina\lichee\linux-3.10\drivers\video\sunxi\disp\disp\dev_fb.c
-
请教一下使用蓝牙测试工具bluz测试蓝牙报下面错误是什么原因?
root@TinaLinux:/mnt/UDISK# hciconfig
hci0: Type: BR/EDR Bus: USB
BD Address: 48:9A:5B:3C:30:9B ACL MTU: 27:8 SCO MTU: 0:0
UP
RX bytes:0 acl:0 sco:0 events:26 errors:0
TX bytes:0 acl:0 sco:0 commands:27 errors:0root@TinaLinux:/mnt/UDISK# hciconfig hci0 up
[ 272.410320] ssv_ble_hci_open():78
[ 272.415190] Config BLE HCI over HWIF
[ 272.420893] BLE TX: Reset
[ 272.444335] BLE RX: Command Complete. len=7
[ 272.449397] BLE TX: Read Local Supported Features
[ 272.457290] BLE RX: Command Complete. len=15
[ 272.462315] BLE TX: Read Local Version Information
[ 272.470281] BLE RX: Command Complete. len=15
[ 272.475281] BLE TX: Read BD_ADDR
[ 272.481531] BLE RX: Command Complete. len=13
[ 272.486736] BLE TX: LE Read Buffer Size
[ 272.493667] BLE RX: Command Complete. len=10
[ 272.499202] BLE TX: LE Read Local Supported Features
[ 272.506491] BLE RX: Command Complete. len=15
[ 272.512299] BLE TX: LE Read Advertising Channel TX Power
[ 272.520949] BLE RX: Command Complete. len=8
[ 272.525881] BLE TX: LE Read White List Size
[ 272.533600] BLE RX: Command Complete. len=8
[ 272.539244] BLE TX: LE Read Supported States
[ 272.545746] BLE RX: Command Complete. len=15
[ 272.551547] BLE TX: Set Event Mask
[ 272.558051] BLE RX: Command Complete. len=7
[ 272.562986] BLE TX: LE Set Event Mask
[ 272.569706] BLE RX: Command Complete. len=7
[ 272.574619] BLE TX: Read Local Supported Commands -optional-
[ 272.583529] BLE RX: Command Complete. len=71
[ 272.589667] BLE TX: LE Set Advertising Data
[ 272.595690] BLE RX: Command Complete. len=7root@TinaLinux:/mnt/UDISK# hcitool scan
Scanning ...[ 966.058850] host driver doesn't implement this unknow hci cmd ==》报错这里,
这里想要扫描蓝牙设备 -
tina系统,想要使用gdb调试应用程序,在makefile中加入-g参数,生成的执行程序一直debug 符号链接,这是怎么回事?
下面是修改的makefile:
是我修改的位置不对吗,麻烦各位指点下!!!
-
请教一下各位大佬,这是mipi屏原厂给过来的初始化代码,麻烦大家帮忙看一下这是什么意思?
正常的给的是这种,
有点不明白上面第一种的格式是怎么去发送初始化代码的,有人见过第一种的格式吗,怎么变成第二种格式