@jaying 在 【水经验混下载权限专用贴】如何升级LV2拉取SDK 中说：

升级 拉取SDK

尝试按照 Tina_Linux_Wi-Fi_开发指南 中的文档编写一个Wifi连接程序，编写完成运行时提示：

wifi daemon has been closed,Please open wifi daemon first.

执行wifi_daemon，提示wpa_supplicant未启动：

wifi_daemon
debug levle:2
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!

随后手动启动了wpa_supplicant，同过wpa_cil验证wpa_supplicant已经正常启动，再次执行wifi_daemon，仍然提示启动失败：

Failed to start wifi daemon.

芯片型号：F133-B
基于D1s-nezha修改
wifi芯片：8189fs，自行编译驱动，开机后手动装载
编写的程序：

#include <stdio.h>
#include "wifi_test.h"
#include "wifid_cmd.h"

void main(void)
{
        char ssid[]="";
        char pwd[]="";
        enum cn_event event=DA_CONNECTED;
        struct wifi_status status;
        printf("Helloworld!\n");
        aw_wifid_open();
        if(aw_wifid_get_status(&status)>=0){
                printf("status get success!%d",status.state);
        }else{
                printf("status get failed!");
        }
        if(aw_wifid_connect_ap(ssid,pwd,&event)>=0){
                printf("Connect Success!");
        }else{
                printf("Connect Failed!,%d",event);
        }
}

来升个级 拉取SDK

尝试按照 Tina_Linux_Wi-Fi_开发指南 中的文档编写一个Wifi连接程序，编写完成运行时提示：

wifi daemon has been closed,Please open wifi daemon first.

执行wifi_daemon，提示wpa_supplicant未启动：

wifi_daemon
debug levle:2
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!
connect wpa_supplicant failed,please check wifi driver!

随后手动启动了wpa_supplicant，同过wpa_cil验证wpa_supplicant已经正常启动，再次执行wifi_daemon，仍然提示启动失败：

Failed to start wifi daemon.

芯片型号：F133-B
基于D1s-nezha修改
wifi芯片：8189fs，自行编译驱动，开机后手动装载
编写的程序：

#include <stdio.h>
#include "wifi_test.h"
#include "wifid_cmd.h"

void main(void)
{
        char ssid[]="";
        char pwd[]="";
        enum cn_event event=DA_CONNECTED;
        struct wifi_status status;
        printf("Helloworld!\n");
        aw_wifid_open();
        if(aw_wifid_get_status(&status)>=0){
                printf("status get success!%d",status.state);
        }else{
                printf("status get failed!");
        }
        if(aw_wifid_connect_ap(ssid,pwd,&event)>=0){
                printf("Connect Success!");
        }else{
                printf("Connect Failed!,%d",event);
        }
}

回复帖子，等待升级

来升个级 拉取SDK

@jaying 在 【水经验混下载权限专用贴】如何升级LV2拉取SDK 中说：

升级 拉取SDK