zzz555 创建的主题

看看是不是wlan_regon和wlan_hostwake的管脚配置问题，根据原理图 低有效还是高有效？

使用以下指令构建
mkfs.ubifs -x zlib -m 4096 -e 258048 -c 245 -F -r oem_res -o oem_ubifs.fex

@zzz555 The clock signal may be operating at a speed outside the bandwidth of your oscilloscope. Check the Hz setting of your clock, and ensure it is less than the bandwidth of the oscilloscope (likely 100 MHz).

If it is higher, then the signal will be attenuated. Configure the scope to be AC-coupled and try increasing the scope gain to see a faint signal.