@whycanservice 在 NPU编译yolov3的时候出现报错vip_lite.h:No such file or directory 中说：

不能直接用交叉编译工具链

那这个该怎么编译呢？小白向大佬请教

Hi.
I have the same problem: when I run sample_rtsp, I get error: fatal error! vencChn[0] get frame failed! check code!

root@TinaLinux:/mnt# ./sample_rtsp -path sample_rtsp.conf WARNING: Logging before InitGoogleLogging() is written to STDERR I0101 00:07:30.651708 1030 dup2SeldomUsedFd.c:20] <dup2SeldomUsedFdInit> gFdLock init I0101 00:07:30.677710 1030 sample_rtsp.c:95] <ParseCmdLine> sample virvi2venc path:[./sample_rtsp], arg number is [3] I0101 00:07:30.680299 1030 confparser.c:60] <createConfParser> load conf file sample_rtsp.conf ok! I0101 00:07:30.680776 1030 sample_rtsp.c:292] <loadSampleConfig> IspAndVeLinkage config: Enable=1, StreamChn=0 Committed_AS: 4088 kB I0101 00:07:30.691137 1030 mpi_sys.c:840] <A[ 76.511060] VE: before freq=300000000 W_MPI_SYS_SetConf> kfctmpdir is [ 76.517758] VE: real freq=300000000 [/tmp] >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Media Process Platform<<<<<<<<<<<<<<<<<<<<<<<<<<<< modName : MPP-Platform tag : V1.0 Release branch: v5-dev commit: 4eed413532ad87725895a8cb1ba75e22fc328233 date : 20170725 author: jenkins iniparser: cannot open /etc/cedarx.conf iniparser: cannot open /vendor/etc/cedarx.conf I0101 00:07:30.712703 1030 mpi_sys.c:1280] <AW_MPI_SYS_Init> ISP init [ISP]>>>>>>>>>>>>>>>>>>>> ISP VERSION INFO <<<<<<<<<<<<<<<<<<< IPCORE: ISP600 branch: libisp-dev commit: 14df8348718d093707641fea73eba7db962885f5 date : Thu Jul 14 15:40:38 2022 +0800 author: <mayifei@allwinnertech.com> -------------------------------------------------------- I0101 00:07:30.713672 1030 mpi_sys.c:1282] <AW_MPI_SYS_Init> ISP init done INFO : cedarc <VeInitialize:1185>: *** ic_version = 0x1302000023010, I0101 00:07:30.734337 1030 hwdisplay.c:84] <hw_display_init> I0101 00:07:30.734595 1030 hwdisplay.c:993] <hwd_init> (hwd_init 993) I0101 00:07:30.734808 1030 hwdisplay.c:1048] <hwd_init> ret[0][2,0]ch[0]lyl[0] init: enable[0], screenwin[0,0, 0x0], zorder[0], alpha[mode:0, value:0] I0101 00:07:30.738925 1030 alsa_interface.c:701] <alsaOpenMixer> open mixer:hw:0 I0101 00:07:30.823111 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:ADC1 ADC2 swap I0101 00:07:30.823324 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:ADC1 volume I0101 00:07:30.823427 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:ADC2 volume I0101 00:07:30.823508 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:ADCDRC I0101 00:07:30.823584 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:ADCHPF I0101 00:07:30.823657 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:DAC volume I0101 00:07:30.823727 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:DACDRC I0101 00:07:30.823795 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:DACHPF I0101 00:07:30.823862 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEIN I0101 00:07:30.823935 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEINL gain volume I0101 00:07:30.824171 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEINR gain volume I0101 00:07:30.824295 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEOUT I0101 00:07:30.824598 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEOUT Output Select I0101 00:07:30.824882 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:LINEOUT volume I0101 00:07:30.825078 1030 alsa_interface.c:756] <alsaOpenMixer> set playback vol_val to value: 27 I0101 00:07:30.825188 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC1 I0101 00:07:30.825411 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC1 Input Select I0101 00:07:30.825529 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC1 gain volume I0101 00:07:30.825618 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC2 I0101 00:07:30.825698 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC2 Input Select I0101 00:07:30.825774 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:MIC2 gain volume I0101 00:07:30.825846 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:SPK I0101 00:07:30.826088 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:digital volume I0101 00:07:30.826204 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:rx sync mode I0101 00:07:30.826293 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:tx hub mode E0101 00:07:30.826389 1030 alsa_interface.c:970] <alsaMixerSetAudioCodecHubMode> aec_elem_audio_codec_hub_mode:tx hub mode-1 E0101 00:07:30.826518 1030 alsa_interface.c:853] <alsaMixerSetCapPlaySyncMode> aec_elem_sync_mode_switch:rx sync mode-1 I0101 00:07:30.826638 1030 alsa_interface.c:701] <alsaOpenMixer> open mixer:hw:1 I0101 00:07:30.827539 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:loopback debug I0101 00:07:30.827712 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:rx sync mode I0101 00:07:30.827824 1030 alsa_interface.c:736] <alsaOpenMixer> alsa_elem:tx hub mode E0101 00:07:30.827917 1030 alsa_interface.c:993] <alsaMixerSetDAudio0HubMode> aec_elem_daudio0_hub_mode:tx hub mode-1 E0101 00:07:30.828066 1030 alsa_interface.c:1016] <alsaMixerSetDAudio0LoopBackEn> aec_elem_daudio0_loopback_en:loopback debug-1 E0101 00:07:30.828214 1030 alsa_interface.c:853] <alsaMixerSetCapPlaySyncMode> aec_elem_sync_mode_switch:rx sync mode-1 I0101 00:07:30.828348 1030 sample_rtsp.c:490] <configMainStream> main vipp0 ve_online_en:1, dma_buf_num:2, venc ch0 OnlineEnable:1, OnlineShareBufNum:2 I0101 00:07:30.828444 1030 sample_rtsp.c:517] <configMainStream> main EncppSharpAttenCoefPer: 100% I0101 00:07:30.828522 1030 sample_rtsp.c:527] <configMainStream> main vbvThreshSize: 147450, vbvBufSize: 933882 [ISP]video device name is vin_video0 [ISP]open video device[0], detect isp0 success! I0101 00:07:31.160279 1030 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:31.160840 1030 videoInputHw.c:942] <videoInputHw_SetChnAttr> ViCh[0] update width:1920(1920), height:1080(1088) I0101 00:07:31.160999 1030 videoInputHw.c:957] <videoInputHw_SetChnAttr> ViCh[0] LBC pix:0x3132434c, line_tar_bits[0]:9216, line_tar_bits[1]:13824 I0101 00:07:31.161826 1030 videoInputHw.c:977] <videoInputHw_SetChnAttr> bs_len:61440, frm_bit:11520 [ISP]video0 fd[10] ve_online_en=[ 77.201400] [VIN]ve_online open, buffer_num is 2 1, dma_buf_num=2 open /dev/sunxi_soc_info failed![ISP]open isp device[0] success! [ISP_WARN]sdcard is not mounted!!! [ISP]prefer isp config: [gc2053_mipi], 1920x1088, 20, 0, 0 [ISP]find gc2053_mipi_1920_1088_20_0 [gc2053_mipi_isp600_20220511_164617_vlc4_day] isp config [ISP]create isp0[ 77.259044] [VIN]video0:buffer count is invalid, set to 2 server thread! 77.307974] VE: before freq=300000000Component.c:1160] 60C<VideoViComponentInit> VideoV[ 77.314952] VE: real freq=300000000 irvi component Init! thread_id[0xb6889d50] I0101 00:07:31.509229 1030 VideoEnc_Component.c:704[ 77.328301] VE: before freq=300000000 2] <VideoEncComponentI[ 77.334152] VE: real freq=300000000 nit> create VideoEnc threadId:0xb6866d50 I0101 00:07:31.509516 1030 VideoEnc_Component.c:2663] <VideoEncSetChnAttr> vencChn[0] enable online! I0101 00:07:31.509650 1030 VideoEnc_Component.c:5422] <VideoEncSendCommand> set VencChn[0] Comp StateIdle I0101 00:07:31.509840 1036 videoInputHw.c:4787] <VideoInputHw_CapThread> loop VideoInputHw_CapThread vipp_id = 0, buf_num=2. I0101 00:07:31.510058 1038 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:31.510327 1038 VideoEnc_Component.c:1110] <CedarvEncInit> VencChn[0] Create VeType=265 iniparser: cannot open /tmp/libcedarc_dynamic_log_level INFO : cedarc <cdc_log_set_level:43>: Set log level to 5 from /vendor/etc/cedarc.conf WARNING: cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: ee230a47e5a2392ec315795121c2d112492fac1c date : Fri Jul 22 10:37:50 2022 +0800 author: wuguanjian change-id : I28fe0c31c718f097d61ad6bdbcb4cb5df0bd3575 release_author : lichaopdc patch : ---------------------------------------------------------------------- I0101 00:07:31.549682 1030 VideoEnc_Component.c:3961] <VideoEncSetFrameRate> vencChn[0] set new framerate:20 I0101 00:07:31.549916 1030 sample_rtsp.c:1244] <setVenc2Dnr3Dnr> VencChn[0] enable and set 2DFilter param I0101 00:07:31.550035 1030 sample_rtsp.c:1257] <setVenc2Dnr3Dnr> VencChn[0] enable and set 3DFilter param I0101 00:07:31.550131 1030 sample_rtsp.c:1275] <setVencSuperFrameCfg> VencChn[0] SuperFrm Mode:0, IfrmSize:1638400 bits, PfrmSize:546133 bits I0101 00:07:31.550240 1030 VideoEnc_Component.c:6284] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE I0101 00:07:31.550363 1030 sample_rtsp.c:638] <configSubStream> vipp[4] crop en:1 X:0 Y:0 W:1888 H:1072 I0101 00:07:31.550454 1030 sample_rtsp.c:651] <configSubStream> sub EncppSharpAttenCoefPer: 33% I0101 00:07:31.550533 1030 sample_rtsp.c:661] <configSubStream> sub vbvThreshSize: 24000, vbvBufSize: 152000 [ISP]video device name is vin_video4 [ISP]open video device[4], detect isp0 success! I0101 00:07:31.550897 1030 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:31.551151 1030 videoInputHw.c:942] <videoInputHw_SetChnAttr> ViCh[4] update width:640(640), height:360(368) I0101 00:07:31[ 77.557037] VE: before freq=300000000 .551265 1030 videoInputHw.c:957[ 77.564098] VE: real freq=300000000 ] <videoInputHw_SetChnAttr> ViCh[4] LBC pix:0x3132434c, line_tar_bits[0]:3072, line_tar_bits[1]:4608 I0101 00:07:31.551685 1030 videoInputHw.c:977] [ 77.581688] VE: before freq=300000000 <videoInputHw_SetChnAt[ 77.588627] VE: real freq=300000000 tr> bs_len:20480, frm_bit:3840 I0101 00:07:31.754989 1030 videoInputHw.c:1254] <videoInputHw_SetCrop> vipp[4] set crop X:0, Y:0, Width:1888, Height:1072 I0101 00:07:31.757969 1030 VideoVirVi_Component.c:1160] <VideoViComponentInit> VideoVirvi component Init! thread_id[0xb679cd50] I0101 00:07:31.758928 1030 VideoEnc_Component.c:7042] <VideoEncComponentInit> create VideoEnc threadId:0xb6779d50 I0101 00:07:31.759148 1030 VideoEnc_Component.c:5422] <VideoEncSendCommand> set VencChn[1] Comp StateIdle I0101 00:07:31.759365 1039 videoInputHw.c:4787] <VideoInputHw_CapThread> loop VideoInputHw_CapThread vipp_id = 4, buf_num=3. I0101 00:07:31.759614 1041 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:31.759869 1041 VideoEnc_Component.c:1110] <CedarvEncInit> VencChn[1] Create VeType=96 iniparser: cannot open /tmp/libcedarc_dynamic_log_level open /dev/sunxi_soc_info failed!WARNING: cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: ee230a47e5a2392ec315795121c2d112492fac1c date : Fri Jul 22 10:37:50 2022 +0800 author: wuguanjian change-id : I28fe0c31c718f097d61ad6bdbcb4cb5df0bd3575 release_author : lichaopdc patch : ---------------------------------------------------------------------- [ISP_ERR]isp_stat_process_buffer, line: 268,AEWB: stats error, skipping buffer. I0101 00:07:31.781457 1030 VideoEnc_Component.c:3961] <VideoEncSetFrameRate> vencChn[1] set new framerate:20 I0101 00:07:31.781702 1030 sample_rtsp.c:1244] <setVenc2Dnr3Dnr> VencChn[1] enable and set 2DFilter param I0101 00:07:31.781827 1030 sample_rtsp.c:1257] <setVenc2Dnr3Dnr> VencChn[1] enable and set 3DFilter param I0101 00:07:31.781924 1030 sample_rtsp.c:1275] <setVencSuperFrameCfg> VencChn[1] SuperFrm Mode:0, IfrmSize:266666 bits, PfrmSize:88888 bits I0101 00:07:31.782041 1030 VideoEnc_Component.c:6284] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE I0101 00:07:31.782179 1030 sample_rtsp.c:772] <configSubLapseStream> subLapse EncppSharpAttenCoefPer: 33% I0101 00:07:31.782277 1030 sample_rtsp.c:782] <configSubLapseStream> SubLapse vbvThreshSize: 24000, vbvBufSize: 152000 I0101 00:07:31.782692 1030 VideoVirVi_Component.c:1160] <VideoViComponentInit> VideoVirvi component Init! thread_id[0xb6756d50] I0101 00:07:31.783620 1030 VideoEnc_Component.c:7042] <VideoEncComponentInit> create VideoEnc threadId:0xb6733d50 I0101 00:07:31.783836 1030 VideoEnc_Component.c:5422] <VideoEncSendCommand> set VencChn[2] Comp StateIdle I0101 00:07:31.784219 1043 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:31.784520 1043 VideoEnc_Component.c:1110] <CedarvEncInit> VencChn[2] Create VeType=96 iniparser: cannot open /tmp/libcedarc_dynamic_log_level WARNING: cedarc <LogVersionInfo:44>: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Cedar Codec <<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : branch: tina-v853-dev commit: ee230a47e5a2392ec315795121c2d112492fac1c date : Fri Jul 22 10:37:50 2022 +0800 author: wuguanjian change-id : I28fe0c31c718f097d61ad6bdbcb4cb5df0bd3575 release_author : lichaopdc patch : ---------------------------------------------------------------------- I0101 00:07:31.799049 1030 VideoEnc_Component.c:3961] <VideoEncSetFrameRate> vencChn[2] set new framerate:20 I0101 00:07:31.799257 1030 sample_rtsp.c:1464] <main> Lapse set TimeLapse 1000000 us I0101 00:07:31.799384 1030 VideoEnc_Component.c:4036] <VideoEncSetTimeLapse> SetTimeLapse: captureIntervalUs=1000000.000000, dstFrameIntervalUs=50000.000000, recType=1 I0101 00:07:31.799493 1030 sample_rtsp.c:1244] <setVenc2Dnr3Dnr> VencChn[2] enable and set 2DFilter param I0101 00:07:31.799584 1030 sample_rtsp.c:1257] <setVenc2Dnr3Dnr> VencChn[2] enable and set 3DFilter param I0101 00:07:31.799669 1030 sample_rtsp.c:1275] <setVencSuperFrameCfg> VencChn[2] SuperFrm Mode:0, IfrmSize:266666 bits, PfrmSize:88888 bits I0101 00:07:32.131591 1030 VideoEnc_Component.c:6284] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE [ISP_WARN]gc2053_mipi get sensor_temp failed: Invalid argument (22). I0101 00:07:32.133689 1030 VideoEnc_Component.c:5418] <VideoEncSendCommand> set VencChn[0] Comp StateExecuting I0101 00:07:32.133983 1038 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:32.134416 1038 VideoEnc_Component.c:788] <setVbvBufferConfig> user set stream buffer size[933882]bytes I0101 00:07:32.134570 1038 VideoEnc_Component.c:798] <setVbvBufferConfig> user set threshSize[147450]bytes I0101 00:07:32.134675 1038 VideoEnc_Component.c:825] <setVbvBufferConfig> bit rate is 1536Kb, set encode vbv size 933888, frame length threshold 147450 I0101 00:07:32.134785 1038 VideoEnc_Component.c:1930] <CedarvVideoEncInit> veChn[0], EncppEnable=1 I0101 00:07:32.134877 1038 VideoEnc_Component.c:1936] <CedarvVideoEncInit> DropFrameNum: 0 I0101 00:07:32.134956 1038 VideoEnc_Component.c:1946] <CedarvVideoEncInit> GDC enable: 0 I0101 00:07:32.135042 1038 VideoEnc_Component.c:2011] <CedarvVideoEncInit> Online Mode=1, Channel=1, ShareBufNum=2, OnlineEnableFlag=1 I0101 00:07:32.135118 1038 VideoEnc_Component.c:2038] <CedarvVideoEncInit> rec_lbc_mode=1 [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! I0101 00:07:32.165899 1038 VideoEnc_Component.c:2059] <CedarvVideoEncInit> Venc Init success I0101 00:07:32.166132 1038 VideoEnc_Component.c:2068] <CedarvVideoEncInit> Venc SetCallbacks success I0101 00:07:32.166314 1038 VideoEnc_Component.c:2078] <CedarvVideoEncInit> Venc Start success I0101 00:07:32.166576 1038 VideoEnc_Component.c:2121] <CedarvVideoEncInit> set Color2Grey [0], in Venchn[0] I0101 00:07:32.166719 1038 VideoEnc_Component.c:2128] <CedarvVideoEncInit> vencChn[0] had init! I0101 00:07:32.166825 1038 VideoEnc_Component.c:8042] <ComponentThread> VencChn[0]: idle/pause[0x2]->executing ... wlan0 ip:192.168.43.210 ********************************************************************************************************* * AW RTSP LIB VERSION: * * BUILD BY WHO: * * BUILD TIME: * ********************************************************************************************************* ============================================================ rtsp://192.168.43.210:8554/ch0 ============================================================ I0101 00:07:32.168219 1030 VideoEnc_Component.c:5418] <VideoEncSendCommand> set VencChn[1] Comp StateExecuting I0101 00:07:32.168500 1041 media_debug.c:45] <getDictByConfPath> MPP_DEDIA_DEBUG_FILE_PATH=(null) I0101 00:07:32.168834 1041 VideoEnc_Component.c:788] <setVbvBufferConfig> user set stream buffer size[152000]bytes I0101 00:07:32.168966 1041 VideoEnc_Component.c:798] <setVbvBufferConfig> user set threshSize[24000]bytes I0101 00:07:32.169068 1041 VideoEnc_Component.c:825] <setVbvBufferConfig> bit rate is 250Kb, set encode vbv size 152576, frame length threshold 24000 I0101 00:07:32.169181 1041 VideoEnc_Component.c:1930] <CedarvVideoEncInit> veChn[1], EncppEnable=1 I0101 00:07:32.169272 1041 VideoEnc_Component.c:1936] <CedarvVideoEncInit> DropFrameNum: 0 I0101 00:07:32.169354 1041 VideoEnc_Component.c:1946] <CedarvVideoEncInit> GDC enable: 0 I0101 00:07:32.169442 1041 VideoEnc_Component.c:2011] <CedarvVideoEncInit> Online Mode=1, Channel=0, ShareBufNum=0, OnlineEnableFlag=0 I0101 00:07:32.169520 1041 VideoEnc_Component.c:2038] <CedarvVideoEncInit> rec_lbc_mode=1 WARNING: cedarc <LDC_K_Adjust:45>: calib_w&h[0 x 0] is valid, force setup to 1920x1080 [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! I0101 00:07:32.276325 1039 videoInputHw.c:4882] <VideoInputHw_CapThread> vipp[4] drop 10 frames done! [ISP]video device name is vin_video12 [ISP]open video device[12], detect isp0 success! I0101 00:07:32.326668 1040 VideoEnc_Component.c:6308] <VideoEncEmptyThisBuffer> send frame when venc state[0x2] is not executing I0101 00:07:32.326909 1040 VideoEnc_Component.c:6383] <VideoEncEmptyThisBuffer> VencChn[1]: first video frame pts[78122322]us,tm1[78122879]us, vSize[640x368], frmId[1,12] open /dev/sunxi_soc_info failed![ISP]--------- LDCI Video12 Init OK --------- [ISP]--------- LDCI Video12 Streamon OK --------- [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! W0101 00:07:33.180080 1045 sample_rtsp.c:1216] <getVencStreamThread> fatal error! vencChn[0] get frame failed! check code! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! W0101 00:07:34.180485 1045 sample_rtsp.c:1216] <getVencStreamThread> fatal error! vencChn[0] get frame failed! check code! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! I0101 00:07:34.327179 1040 VideoVirVi_Component.c:1354] <Vi_ComponentThread> virvi[4-0] has no frame input? [ISP_ERR]video_wait_buffer, line: 488,video4 select timeout! W0101 00:07:34.327568 1039 videoInputHw.c:4945] <VideoInputHw_CapThread> vipp[4] get frame fail! frameBufId[1] is not release W0101 00:07:34.327719 1039 videoInputHw.c:4949] <VideoInputHw_CapThread> vipp[4] get frame fail! [1]frames are not release [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! W0101 00:07:35.180979 1045 sample_rtsp.c:1216] <getVencStreamThread> fatal error! vencChn[0] get frame failed! check code! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error! [ISP_ERR]isp_sync_debug_info, line: 747,VIDIOC_VIN_ISP_GET_INFO error!

I tried turning off the main channel, but it did not work. I don’t understand what caused this error, would be thanks for any advice

@igbt70 感谢感谢

@whycanservice 我将logo图片设置为32位并且设置透明层为白色，确实解决了。比较想知道，这类问题软件能不能在启动完logo之后，重新配置图层，这样就不会因为logo不是32位从而影响到摄像头？

v系列原厂没有rt-linux的补丁，v853的实时性操作可以做到e907核心内，运行rtos，amp访问

V85x E907 小核开发与使用
https://bbs.aw-ol.com/topic/3017/share/1

@igbt70 你这解决了没，我在853 编译后就可以用了，你的是做了修改吗？

@misay

chmod 777 yolov3 ./yolov3 xxx.nb xxx.jpg ···

@h2631436132
解决了，环境配好后没重启vscode，重启后就OK了

您好！鼠标配置成功了吗？可以分享一下方法吗？

@chenbincba168
感觉是 sensor的 lanes 和 dts配置的lanes不一致引起的．

@h2631436132 大佬wxid_disxysjskla给的cmake版本例程，已试过没有问题。

@xinshuwei 内存初始化失败，检查硬件是否虚焊，阻抗是否符合标准

@mysteryli 是，这个只是警告没搜到设备，内核打印等级太高了

@sergpenshin SDK is updated, and this command is deprecated. try to use this stand alone package for build https://github.com/YuzukiHD/Yuzukilizard/tree/master/Software/sunxi-mpp

@whycanservice
thanks for the help

GPIO使用的是linux的pinctrl子系统，具体如下
https://v853.docs.aw-ol.com/soft/dev_gpio/

如果需要裸机驱动，可以参考RTOS的HAL驱动
https://github.com/YuzukiHD/Yuzukilizard/tree/master/Software/BSP/e907_rtos/rtos-hal/hal/source/gpio

2.5~4.5V，一般是挂3V纽扣电池的

@wl17761275256 没烧写过eFuse的空片就是 GPIO Pin Select

管脚是PC2 PC3

@whycanservice 与硬件无关

@whycan 在 各位大佬，pack打包YOLOV3 Demo时报错：rootfs.fex文件过大！怎么办？ 中说：

修改板级目录下面的 sys_partition.fex 的 rootfs.fex 节点

Screenshot from 2023-04-16 09-50-09.png

谢谢晕哥！

@chhjnavy 正解

@whycan 在 各位大佬，请问如何让一个交叉编译过的sample,在开发板开机运行？ 中说：

@cavert121
我的意思是可以用adb shell 执行，但是命令行得存在。

只要用串口终端能正常执行的命令，用adb shell都能执行。

终于明白晕哥您这段话的意思了，😂 交叉编译过的可执行文件已经成功在开发板开机自启动了，太感谢了！🙏

@baiwen 东山开始进军带ISP的Soc领域了👏 深水区, 人少但很有价值

@igbt70 看一下《v853基础组件开发指南》中《MPP_Sample_使用说明》这篇文章。在make menuconfig中打开你想用的sample所要求的组件模块支持。比如sample_virvi2vo 需要mpp_vi和mpp_hw_display以及mpp_vo这三个组件依赖，勾选上这三个选项后，然后再勾选下面有个select sample选项，来打开可供选择的sample。你就会发现sample_virvi2vo这个sample赫然在列了!

124d1f21-f98d-4387-b5d3-acddff431695-微信图片_20230411194939.jpg

@xiaowenge 谢谢

@cavert121 对啊，我写的里面也有然你去源码目录下找

fbtft没勾选驱动，或者fbtft初始化错误，看fbtft的输出

@wxid_disxysjskla cmake完成后sample下没有对应的可执行文件呀？可执行文件在哪里呀？

@h2631436132 4d1d944e-1de6-477e-82d0-f426553d077d-image.png
没有/sys/kernel/debug/remoteproc/这个目录

@ubuntu 把usbdriver里的inf文件安装后解决了

@whycanservice 我就是因为安装了中文输入法，然后报奇奇怪怪的错误代码，只好重新安装Ubuntu了😧 建议不要再考虑什么中文注释了。

@wl17761275256
是的，建议加上。

@h2631436132
问题都解决了
第一个bin目录下的用不了环境变量下配置acuitylib中的pegasus
第二个在yolov.weight目录下打开终止执行

编译一个ncnn直接cpu跑

@whycan 有的
85dee962-bebf-4dca-93c1-732cd6a49203-image.png

@wl17761275256

V853&V853S_PINOUT_V1.0.xlsx

请教大佬，V853是怎样通过SD卡启动的呢，我制作一张启动卡，但是插上去没有串口信息输出。不知什么原因。

@icpachong 请问怎么更改才能正常运行呢

@whycan 我直接复制粘贴的，😵 好吧

@whycanservice 微信图片_20230403134707.jpg 谢谢！弄好了

@haaland

https://bbs.aw-ol.com/topic/1844

@norkin 矩形是已知的前提下计算距离不难，单目摄像头只能处理平面，上下层不行

@z272ro 对比下g2d的头文件和kernel里是不是一样的

@h2631436132
建议您先学习一些基础知识，可以到 bilibili 搜索嵌入式开发视频，推荐“百问网”。

可以，https://v853.docs.aw-ol.com/soft/dev_gpio/

@whycan
问题解决了，十分感谢

@igbt70 libc6-i386 删了试一下

把驱动完全卸载了重新安装

支持deepspeech2语音识别算法的部署

@wxid_disxysjskla 建议用 && 来判断，避免丢失了别的错误信息

模型显示：

54ca60e1-1dbd-45e7-bbee-a33fa2a76907-d30a9b359c20c9fc6d5e46f2f8d7af9.png

内存评估：
1364b2a5-ab5b-441f-9b7d-0aff975eb04f-1b43e38b3ecff4ca4cc412badcbdecd.png

输入数据：
391a5a16-9d36-4179-a302-1ee048718cae-586cd920eb8feebea82f54a99f13f13.png

输出数据：
7072f29a-8edd-4bd7-96e9-b2c862533137-0d0644bb8313e243b0d3a9ed4053f4b.png

操作：
8c72152a-bc6f-4ad1-b1e3-0c058e953262-768c43f0af202fc7ffef3c2978538b8.png

层：
44612c2b-321b-48e9-94f0-4c78c20be41b-45bba74aeaa7e06df243fe3bd99be64.png

@likehengall

67bf2bcc-1534-4de6-8a42-a85e0ae6124f-image.png

发现如果改用glibc，mpp不能用

【资料】V853 物料 Support List
https://bbs.aw-ol.com/topic/1997/share/1

有问题，手动修改json模型结构试一下

@whycanservice 好的 我试一下

@mysteryli
你就按照1 这个 一步步
https://v853.docs.aw-ol.com/npu/npu_demo/

版本不一样，以新版本为准

@whycanservice 👍 谢谢

一般使用g2d进行图像变化

@likehengall 在断电检测中

@whycan 确实是这样，重新配置打包就ok了

@whycanservice 谢谢，现在可以了，原因是我在mnt目录下解压的，换个目录就可以了

@plwl20220517
可能是分区格式在windows不能识别，你试一试插入ubuntu。

@plwl20220517 在 aclocal-1.16: error: aclocal: file 'm4/lt~obsolete.m4' does not exist 中说：

erofs-utils

编译的时候，不编erofs-utils这个可以编过去

（507芯片）问一下，想尝试新建一个分区，然后修改了一下sys_partition.fex文件，具体如下

;--------------------------------------------------------------------------------------------------- ; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串 ;--------------------------------------------------------------------------------------------------- ;--------------------------------------------------------------------------------------------------- ; 固件下载参数配置 ;--------------------------------------------------------------------------------------------------- ;*************************************************************************************************** ; mbr的大小, 以Kbyte为单位 ;*************************************************************************************************** [mbr] size = 16384 ;*************************************************************************************************** ; 分区配置 ; ; ; partition 定义范例: ; [partition] ; //表示是一个分区 ; name = USERFS2 ; //分区名称 ; size = 16384 ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T ; downloadfile = "123.fex" ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径 ; keydata = 1 ; //私有数据分区，重新量产数据将不丢失 ; encrypt = 1 ; //采用加密方式烧录，将提供数据加密，但损失烧录速度 ; user_type = ? ; //私有用法 ; verify = 1 ; //要求量产完成后校验是否正确 ; ; 注：1、name唯一, 不允许同名 ; 2、name最大12个字符 ; 3、size = 0, 将创建一个无大小的空分区 ; 4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍 ;*************************************************************************************************** [partition_start] ;------------------------------>mmcblk0p1/nand0p1 [partition] name = boot-resource size = 65536 downloadfile = "boot-resource.fex" user_type = 0x8000 ;------------------------------>mmcblk0p2/nand0p2 [partition] name = env size = 32768 downloadfile = "env.fex" user_type = 0x8000 ;------------------------------>mmcblk0p3/nand0p3 [partition] name = boot size = 131072 downloadfile = "boot.fex" user_type = 0x8000 ;------------------------------>mmcblk0p4/nand0p4 [partition] name = rootfs size = 4194304 downloadfile = "rootfs.fex" user_type = 0x8000 ;------------------------------>mmcblk0p5/nand0p5 [partition] name = rootfsbak size = 4194304 user_type = 0x8000 ;------------------------------>mmcblk0p6/nand0p6 [partition] name = recovery size = 231072 ;downloadfile = "recovery.fex" user_type = 0x8000 ;------------------------------>mmcblk0p7/nand0p7 [partition] name = private size = 32768 ro = 0 user_type = 0x8000 ;------------------------------>mmcblk0p8/nand0p8 [partition] name = test size = 4194304 user_type = 0x8000 ;------------------------------>mmcblk0p9/nand0p9 ;------------------------------>UDISK [partition] name = UDISK user_type = 0x8100

然后执行打包编译也提示成功，
BuildImg 0
Dragon execute image.cfg SUCCESS !
但是烧录到板子上，分区也出来了，但有另外一个错误，

[02.831]Starting kernel ... [02.834][mmc]: mmc exit start [02.852][mmc]: mmc 2 exit ok [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.170 (root@ubuntu) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #2 SMP PREEMPT Fri Sep 16 19:19:55 PDT 2022 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] bootconsole [earlycon0] enabled [/init]: getty is ttyS0 [/init]: RootDevice is "/dev/mmcblk0p4" , GPT_SUPPORT=1 [/init]: Try to load EMMC ... e2fsck 1.42.12 (29-Aug-2014) The filesystem size (according to the superblock) is 1572864 blocks The physical size of the device is 524288 blocks Either the superblock or the partition table is likely to be corrupt! Abort? yes mount: mounting /dev/mmcblk0p4 on /mnt failed: Invalid argument [/init]: Failed to mount /dev/mmcblk0p4!

我也尝试在uboot里面去设置一下
env set mmc_root /dev/mmcblk0p4
saveenv，但是没有效果，这个该怎么处理呢？另外还有一个问题就是我能给新加的这个分区在制作的时候加密上吗？访问改分区的时候需要密码才给访问。这个怎么实现？

未量化的节点代表NN矩阵不支持这个节点，是使用PPU进行模拟的