D1 _open SDK，编译烧录SD卡MMC失败

[jincheng]

编译log

compiled.log

启动log

startboot.log

烧录软件

[whycan]

@jincheng

[2023-04-10 23:44:00]  [00.570]workmode = 0,storage type = 1
[2023-04-10 23:44:00]  [00.573][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[2023-04-10 23:44:00]  [00.579][mmc]: get sdc_type fail and use default host:tm1.
[2023-04-10 23:44:00]  FDT ERROR:fdt_get_all_pin:get property handle pinctrl-0 error:FDT_ERR_INTERNAL
[2023-04-10 23:44:00]  [00.591][mmc]: get card0 default pin fail
[2023-04-10 23:44:00]  [00.595][mmc]: can't find node "mmc0",will add new node
[2023-04-10 23:44:00]  [00.600][mmc]: fdt err returned <no error>
[2023-04-10 23:44:00]  [00.603][mmc]: Using default timing para
[2023-04-10 23:44:00]  [00.607][mmc]: sunxi mmc pin set failed!
[2023-04-10 23:44:00]  [00.611]error card no error
[2023-04-10 23:44:00]  [00.613][mmc]: MMC Device -1 not found
[2023-04-10 23:44:00]  fail to find one useful mmc card
[2023-04-10 23:44:00]  initcall sequence 0000000043f91318 failed at call 000000004200df06 (err=-1)
[2023-04-10 23:44:00]  ### ERROR ### Please RESET the board ###

怀疑你的 uboot-board.dts sdc0 节点的pin配置有问题。

[jincheng]

@whycan 是，pin引脚后面打开了，在env中也修改成mmc，就可以了