D1S上面如何跑melis？
-
前天经过大佬指点已经顺利的将melis跑在D1上了。
现在又切换到D1S上来跑，发现遇到类似问题，跑起来就挂了。
根据当时D1的修改配置方法，在F133的project配置里已经是类似D1上面的配置修改了，但是不知道为啥，还会起来就挂。
下面是启动日志：[142]HELLO! BOOT0 is starting! [144]BOOT0 commit : 889f614 sbi2ekernel =============================================================================================================== | /'\_/`\ (_ ) _ /'_ ) /'_ `\ /' _`\ | | | | __ | | (_) ___ ______ _ _ (_)_) | ( (_) | | ( ) | | | | (_) | /'__`\ | | | |/',__)(______)( ) ( ) _(_ < \__, | | | | | | | | | | |( ___/ | | | |\__, \ | \_/ |( )_) | _ | | _ | (_) | | | (_) (_)`\____)(___)(_)(____/ `\___/'`\____)(_) (_)(_)`\___/' | |version : V3.9.0 | |commitid: 976499a346a3d5d6d80047f3844d1d5c3e37ac55 | |sunxiver: 30800 | |timever : Thu, 04 Nov 2021 20:14:43 +0800 | |compiler: gcc version 8.4.0 (T-HEAD RISCV Tools V1.10.2 B20201104) | |optimal : -Os -g -gdwarf-2 -gstrict-dwarf | |linker : GNU ld (GNU Binutils) 2.32 | |newlibc : 3.0.0 | |author : zhouji | =============================================================================================================== [DBG]: [__mount_parts:0273]: classname=DMS [DBG]: [__mount_parts:0274]: devname=dms01 [DBG]: [__mount_parts:0301]: find last lun. [DBG]: [__mount_parts:0331]: nPart = 1. [DBG]: [__mount_parts:0460]: dmsPart: "DMS\dms010" is linked to symbel "B". [ERR]: [esFSYS_pread:0318]: fs fatal err [ERR]: [esFSYS_pread:0318]: fs fatal err [ERR]: [esFSYS_pread:0318]: fs fatal err [ERR]: [esFSYS_pread:0318]: fs fatal err [DBG]: [esFSYS_mntfs:0317]: devfs,mount on B. [DBG]: [kservice_maintask:0834]: partition [B] plug in.. [DBG]: [__mount_parts:0273]: classname=DISK [DBG]: [__mount_parts:0274]: devname=RAMDISK [DBG]: [__mount_parts:0301]: find last lun. [DBG]: [__mount_parts:0331]: nPart = 1. [DBG]: [__mount_parts:0460]: rawpart: "DISK\RAMDISK0" is linked to symbel "C". [ERR]: [esFSYS_mntfs:0298]: identify the filesystem failure. [ERR]: [cheduler startup [DBG]: [__mount_parts:0273]: classname=DISK [DBG]: [__mount_parts:0274]: devname=ROOTFS [DBG]: [__mount_parts:0301]: find last lun. [DBG]: [__mount_parts:0331]: nPart = 1. [DBG]: [__mount_parts:0460]: rawpart: "DISK\ROOTFS0" is linked to symbel "D". [DBG]: [esFSYS_mntfs:0317]: minfs,mount on D. [DBG]: [kservice_maintask:0834]: partition [D] plug in.. [DBG]: [melis_udisk_part_check:0553]: melis_udisk_part_check 553 copy udisk_buff [DBG]: [__mount_parts:0273]: classname=DISK [DBG]: [__mount_parts:0274]: devname=UDISK [DBG]: [__mount_parts:0301]: find last lun. [DBG]: [__mount_parts:0331]: nPart = 1. [DBG]: [__mount_parts:0423]: rawpart: "DISK\UDISK0" is linked to symbel "E". [ERR]: [esFSYS_mntfs:0298]: identify the filesystem failure. [ERR]: [__mount_parts:0501]: mount E failure. SDC:hal_sdc_create host:0x401b65d8 id:0 [ERR] SDC:name sdc0_d1,port 6,port_num 0,mul_sel 2, pull 1, drv_level 1 [ERR] SDC:name sdc0_d0,port 6,port_num 1,mul_sel 2, pull 1, drv_level 1 [ERR] SDC:name sdc0_clk,port 6,port_num 2,mul_sel 2, pull 1, drv_level 1 [ERR] SDC:name sdc0_cmd,port 6,port_num 3,mul_sel 2, pull 1, drv_level 1 [ERR] SDC:name sdc0_d3,port 6,port_num 4,mul_sel 2, pull 1, drv_level 1 [ERR] SDC:name sdc0_d2,port 6,port_num 5,mul_sel 2, pull 1, drv_level 1 SDC:Not implement __mci_restore_io,793 SDC:Not imp hal_sdc_init,2206 SDC:hal_sdc_init,2239 no imp SDC:hal_sdc_init,2248 no imp SDC:SDC Host Capability:0x3820f Ocr avail:0x3f0000 SDC:Not implement __mci_hold_io,778 SDC:SDC cd_mode:2 present_val:0 SDC:SDC id:0 dma_use:1 present:0 driver version SD/MMC/SDIO Host Controller Driver(v0.28 2021-08-24 16:50) init ok. host_id =0! [ERR]: [hal_ths_init:0094]: 0x2009404, 0x2009400, 0x2009430, 0x2009408 key name:thermal_sensor key size:64 key offset:20 thermal_sensor: 42 01 bb 98 0e b0 9d 01 the cir_master_init success phy_vbase : 0x4200800, usbc_no : 1, efuse : 0x19db00e [usb_new_phy_print][79] reg[DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! 0x1c : 0x4 [usb_new_phy_print][80] reg [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! 0x30 : 0xcb [usb_new_phy_print][81] reg 0x60 : 0x22b8 [usb_new_phy_print][82] reg 0x40 : 0x8c [usb_new_phy_print][79] reg 0x1c : 0x0 [usb_new_phy_print][80] reg 0x30 : 0x18b [usb_new_phy_print][81] reg 0x60 : 0x22b8 [usb_new_phy_print][82] reg 0x40 : 0x7c [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [console_LKeyDevEvent:0530]: input sys keydev not init! [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\slib.mod. [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\display.mod. [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\mixture.mod. [DBG]: [layer_request:0689]: requested: ch:0, id:0 disp_mgr.req_layer_cnt = 1 [DBG]: [mod2drv_layerinfo:0366]: lbc_mode = 0 [ERR]: [open_lcd_backlight:0610]: get backlight err,default to 100 [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\charset.mod. msh />Execute startup script begin.............. install mod para num [2]: insmod d:\mod\orange.mod [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\orange.mod. Mod:d:\mod\orange.mod Installed!, mod id=120 install mod para num [2]: insmod d:\apps\desktop.mod [DBG]: [LDR_LoadFile:0247]: filepath = d:\apps\desktop.mod. [DBG]: [DESKTOP_MOpen:0078]: DESKTOP_MOpen. [DBG]: [LDR_LoadFile:0247]: filepath = d:\apps\init.axf. Mod:d:\apps\desktop.mod Installed!, mod id=127 ...............Execute startup script end [DBG]: [msg_srv_init_key_channel:0150]: emit_ctr.h_keyGraber=0x40d6d1a0 [DBG]: [msg_srv_init_key_channel:0161]: LdevID=0 [DBG]: [application_init_process:0836]: & application_init_process enter! & dsk_reg_read_config_file 571 e:\setting.bin eLIBs_fopen fail dsk_reg_init_para 797 config not ok, format e: [DBG]: [esFSYS_mntfs:0317]: fat,mount on E. [DBG]: [kservice_maintask:0834]: partition [E] plug in.. [DBG]: [application_init_process:0854]: application_init_process 854 before live_init [DBG]: [live_init:0040]: ~~~~~~~~~~~~~~before dsk_set_isn_charset~~~~~~~~~~~ [DBG]: [alsa_open_pcm:0218]: open pcm! card:[audiocodec], pcmFlag:[1](0-cap;1-play) [SND_ERR][ksnd_pcm_prepare:2005]unsupport state transform. [DBG]: [dsk_display_set_lcd_brightness:0297]: setting lcd_bright=176 [DBG]: [application_init_process:0862]: application_init_process 862 before gscene_bgd_init [DBG]: [gscene_bgd_is_file_exist:0620]: file is exist:d:\res\bg_default0.jpg [DBG]: [gscene_bgd_init:0130]: bgd_com->screen_size.width = 800 bgd_com->screen_size.height = 480 ftype = 1 [DBG]: [application_init_process:0883]: .start device monitor ....................................... [DBG]: [application_init_process:0891]: application_init_process 891 before init_mainwin_create [DBG]: [dsk_display_set_lcd_brightness:0297]: setting lcd_bright=192 [DBG]: [__hbar_layer_create:0093]: hbar fb 800 46 gui_dir=0 [DBG]: [__hbar_layer_create:0094]: hbar src 0 0 800 46 [DBG]: [__hbar_layer_create:0095]: hbar scn 0 0 800 46 [DBG]: [reset_headbar_data:0273]: xxxxxx para->data.volume = 30 [DBG]: [reset_headbar_data:0277]: xxxxxx bright = 11 [ERR]: [esPINS_ReadPinData:0640]: pin handle is invalid! [DBG]: [application_init_process:0897]: application_init_process 897 before _process_init [DBG]: [applet_info_manager_load_dir:0307]: find dir file d:\apps\phy_vbase : 0x4101800, usbc_no : 0, efuse : 0x19db00e [usb_new_phy_print][79] reg 0x1c : 0x0 [usb_new_phy_print][80] reg 0x30 : 0x18b [usb_new_phy_print][81] reg 0x60 : 0x22b8 [usb_new_phy_print][82] reg 0x40 : 0x7c [usb_new_phy_print][79] reg 0x1c : 0x0 [usb_new_phy_print][80] reg 0x30 : 0x18b [usb_new_phy_print][81] reg 0x60 : 0x22b8 [usb_new_phy_print][82] reg 0x40 : 0x7c desktop\app_root.desktop! [DBG]: [applet_info_manager_load_file:0267]: filename = d:\apps\desktop\app_root.desktop len=124 [DBG]: [__activity_load_common:0395]: load application application://app_root. [DBG]: [LDR_LoadFile:0247]: filepath = d:\apps\app_root.axf. card_detect removed sdmmc_test->card_id=0 [WRN] SD:mmc_card_open card not exit! id:0 card open fail [DBG]: [app_home_create:0657]: ******** enter multi screen home application ************** [DBG]: [gscene_bgd_is_file_exist:0620]: file is exist:d:\res\bg_default0.jpg [DBG]: [gscene_bgd_set_status_show:0170]: bkpic: d:\res\bg_default0.jpg. [DBG]: [LDR_LoadFile:0247]: filepath = d:\mod\vcoder.mod. [DBG]: [mod2drv_layerinfo:0366]: lbc_mode = 0 [ERR]: [Mod_Display_MIoctrl:1771]: no this CMD in display mod [DBG]: [dsktop_scene_get_cur_app:0664]: g_last_desk_app_index:0 [DBG]: [desktop_scene_create:0582]: width = 800, height= 480 [DBG]: [desktop_scene_create:0587]: cur_desk_app_index:0 [DBG]: [GUI_LogicLayerRequest:0527]: src.w = 800 src.h = 480 [DBG]: [layer_request:0689]: requested: ch:1, id:0 disp_mgr.req_layer_cnt = 1 [DBG]: [GUI_LogicLayerRequest:0527]: src.w = 800 src.h = 46 [DBG]: [layer_request:0689]: requested: ch:1, id:1 disp_mgr.req_layer_cnt = 2 [DBG]: [reset_headbar_data:0273]: xxxxxx para->data.volume = 30 [DBG]: [reset_headbar_data:0277]: xxxxxx bright = 11 [DBG]: [app_root_wincreate:4387]: root win = 40eff8f8 [DBG]: [application_init_process:0918]: application_init_process 918 before GUI_GetMessageEx -
melis源码哪里搞呀
-
@nancheng 得问全志授权要
-
@geniusgogo 全志授权怎么整啊，我看官网有个什么NDA认证，但是那是针对公司的，，个人想弄，有办法吗
-
买个D1S的开发板就可以拿到melis了
-
@ricky 开发板都是配linux系统的，有没有支持melis的开发板推荐
-
@geniusgogo melis默认支持的屏幕是什么屏幕，还有触摸支持是啥芯片。刚看到这个代码，还没发现这部分~~
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号