全志A13刷机资料
-
各位大佬好，我在13年前读初中的时候拿到了一台全志A13的平板，当时第一次接触安卓，后面搞了Root权限，看到可以删除系统软件，想着反正可以还原，试试删除“Android系统”APP会怎样，结果直接变砖了。现在通过串口进入了Uboot，想尝试刷机，但是一直找不到对应的资料……，希望有资料的大佬能提供一下，谢谢！
下面是相关的信息：
从UBoot中读取到的System分区里的构建信息，build.prop# begin build properties # autogenerated by buildinfo.sh ro.build.id=IMM76D ro.build.display.id=nuclear_evb-eng 4.0.4 IMM76D 20120712 test-keys ro.build.version.incremental=20120712 ro.build.version.sdk=15 ro.build.version.codename=REL ro.build.version.release=4.0.4 ro.build.date=Thu Jul 12 12:41:11 CST 2012 ro.build.date.utc=1342068071 ro.build.type=eng ro.build.user=liuzhi ro.build.host=software ro.build.tags=test-keys ro.product.model=KB702 ro.product.brand=softwinners ro.product.name=nuclear_evb ro.product.device=nuclear-evb ro.product.board=nuclear ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.manufacturer=unknown ro.product.locale.language=en ro.product.locale.region=US ro.wifi.channels= ro.board.platform=exDroid # ro.build.product is obsolete; use ro.product.device ro.build.product=nuclear-evb # Do not try to parse ro.build.description or .fingerprint ro.build.description=nuclear_evb-eng 4.0.4 IMM76D 20120712 test-keys ro.build.fingerprint=softwinners/nuclear_evb/nuclear-evb:4.0.4/IMM76D/20120712:eng/test-keys ro.build.characteristics=tablet # end build properties # # ADDITIONAL_BUILD_PROPERTIES # ro.com.android.dateformat=MM-dd-yyyy ro.config.ringtone=Ring_Synth_04.ogg ro.config.notification_sound=pixiedust.ogg ro.config.alarm_alert=Alarm_Classic.ogg dalvik.vm.heapsize=48m ro.kernel.android.checkjni=0 persist.sys.timezone=Asia/Shanghai persist.sys.language=zh persist.sys.country=CN wifi.interface=wlan0 wifi.supplicant_scan_interval=15 debug.egl.hw=1 ro.opengles.version=131072 persist.sys.strictmode.visual=0 persist.sys.strictmode.disable=1 hwui.render_dirty_regions=false persist.sys.usb.config=mass_storage,adb ro.property.tabletUI=true ro.udisk.lable=MID ro.product.firmware=1.4rc3 ro.setupwizard.mode=OPTIONAL net.bt.name=Android dalvik.vm.stack-trace-file=/data/anr/traces.txt硬件信息：
SOC：全志A13 NAND：MT29F32G08CBACA 内存卡接口：存在 USB接口：存在启动信息：
HELLO! BOOT0 is starting! boot0 version : 1.3.0 dram size =512 Succeed in opening nand flash. Succeed in reading Boot1 file head. The size of Boot1 is 0x00036000. The file stored in 0X00000000 of block 2 is perfect. Check is correct. Ready to disable icache. Succeed in loading Boot1. Jump to Boot1. [ 0.127] boot1 version : 1.3.1c [ 0.127] pmu type = 3 [ 0.128] bat vol = 3678 [ 0.155] axi:ahb:apb=3:2:2 [ 0.155] set dcdc2=1400, clock=1008 successed [ 0.157] key [ 0.170] no key found [ 0.170] flash init start [ 0.186] flash init finish [ 0.188] fs init ok [ 0.188] fattype FAT16 [ 0.189] fs mount ok [ 0.194] script finish [ 0.195] power finish [ 0.201] BootMain start [ 0.201] 0 [ 0.218] init to usb pc [ 0.232] startup status = 1 [ 0.232] key value = 1 [ 0.233] recovery key high 6, low 4 [ 0.236] unable to find fastboot_key key_max value [ 0.243] test for multi os boot with display [ 0.864] show pic finish [ 0.864] load kernel start [ 0.880] load kernel successed [ 0.880] star U-Boot 2011.09-rc1-svn22 (Jul 12 2012 - 12:34:39) Allwinner Technology CPU: SUNXI Family Board: A13-EVB DRAM: 512 MiB NAND: 3800 MiB In: serial Out: serial Err: serial --------fastboot partitions-------- -total partitions:9- -name- -start- -size- bootloader : 1000000 1000000 env : 2000000 1000000 boot : 3000000 2000000 system : 5000000 10000000 data : 15000000 20000000 misc : 35000000 1000000 recovery : 36000000 2000000 cache : 38000000 10000000 UDISK : 48000000 a5800000 -----------------------------------UBOOT 环境变量：
sunxi#printenv boot_fastboot=fastboot boot_normal=nand read 40007800 boot;boota 40007800 boot_recovery=nand read 40007800 recovery;boota 40007800 bootcmd=run setargs boot_normal bootdelay=1 console=ttyS0,115200 fastboot_key_value_max=0x8 fastboot_key_value_min=0x2 init=/init loglevel=8 mmc_root=/dev/mmcblk0p4 nand_root=/dev/nandc recovery_key_value_max=0x13 recovery_key_value_min=0x10 setargs=setenv bootargs console=${console} root=${nand_root} init=${init} loglevel=${loglevel} stderr=serial stdin=serial stdout=serial内核启动日志：
Starting kernel ... DRAM: 512[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun5i [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664 [ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284 [ 0.040000] try to parse apb frequency from script faild! [ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics [ 0.040000] Init eGon pin module V2.0 [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG [ 0.050000] [sw_hcd0]: usb host driver initialize........ [ 0.050000] [sw_hcd0]: open_usb_clock [ 0.060000] [hcd0]: open, 0x60(0xc061), 0xcc(0x101) [ 0.060000] [sw_hcd0]: host_init_state = 0 [ 0.060000] [sw_hcd0]: platform is usb host [ 0.060000] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38 [ 0.060000] wrn: hcd is not enable, need not start hcd [ 0.060000] [sw_hcd0]: sw_usb_host0_disable start [ 0.060000] -------sw_hcd0_soft_disconnect--------- [ 0.060000] [sw_hcd_host0]: Set USB Power OFF [ 0.060000] wrn: hcd is not enable, need not stop hcd [ 0.060000] [sw_hcd0]: close_usb_clock [ 0.060000] [hcd0]: close, 0x60(0xc060), 0xcc(0x0) [ 0.060000] [sw_hcd0]: sw_usb_host0_disable end [ 0.060000] [sw_udc]: udc_init: version 20080411 [ 0.110000] [pm]aw_pm_init! [ 0.120000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.280000] [NAND]nand driver, init. [ 0.280000] [NAND] nand gpio_request [ 0.290000] [NAND] nand driver version: 0x2 0x9 [ 0.290000] nand interrupte register ok [ 0.290000] ret of NFC_ChangMode is 0 [ 0.300000] dma_hdle is 0 [ 0.300000] dma_hdle is 10000008 [ 0.320000] The 0 disk name = bootloader, class name = DISK, disk size = 32768 [ 0.330000] The 1 disk name = env, class name = DISK, disk size = 32768 [ 0.340000] The 2 disk name = boot, class name = DISK, disk size = 65536 [ 0.340000] The 3 disk name = system, class name = DISK, disk size = 524288 [ 0.350000] The 4 disk name = data, class name = DISK, disk size = 1048576 [ 0.360000] The 5 disk name = misc, class name = DISK, disk size = 32768 [ 0.360000] The 6 disk name = recovery, class name = DISK, disk size = 65536 [ 0.370000] The 7 disk name = cache, class name = DISK, disk size = 524288 [ 0.380000] The 8 disk name = UDISK, class name = DISK, disk size = 5423104 [ 0.390000] The 8 disk size = 5423104 [ 0.390000] part total count = 9 [ 0.600000] [NAND]nand driver, ok. [ 0.600000] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch spi0 uning configuration failed [ 0.610000] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed [ 0.620000] drivers/spi/spi_sunxi.c(L2124) register spi devices board info failed [ 0.630000] cannot find any using configuration for all spi controllers! [ 0.640000] ------print_msc_config----- [ 0.640000] vendor_id = 0x18d1 [ 0.640000] mass_storage_id = 0x1 [ 0.650000] adb_id = 0x2 [ 0.650000] usb_manufacturer_name = USB Developer [ 0.660000] usb_product_name = Android [ 0.660000] usb_serial_number = 20080411 [ 0.670000] msc_vendor_name = USB 2.0 [ 0.670000] msc_product_name = USB Flash Driver [ 0.680000] msc_release = 100 [ 0.680000] luns = 2 [ 0.680000] --------------------------- [ 0.690000] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb' [ 0.690000] [sw_udc]: alloc request: ep(0xc08c1ec0, ep0, 64), req(0xdf01e740) [ 0.700000] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active [ 0.710000] [sw_udc]: sw_udc_pullup, is_on = 0 [ 0.710000] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active [ 0.720000] lun name: lun [ 0.720000] lun name: lun1 [ 0.730000] Gadget Android: controller 'sw_usb_udc' not recognized [ 0.730000] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active [ 0.740000] ==register_early_suspend = [ 0.750000] !!! base_Addr = 0xe08ecc00 [ 0.750000] config i2c gpio with gpio_config api [ 0.760000] twi0, apb clock = 24000000 [ 0.760000] [AXP]axp driver uning configuration failed(324) [ 0.770000] [AXP]power_start = 0 [ 0.770000] rtc_detect,line:197 [ 0.770000] **********start************ [ 0.780000] 0x40 [ 0.780000] 0xf8 [ 0.780000] 0x28 [ 0.780000] 0x0 [ 0.780000] 0x0 [ 0.790000] **********end************ [ 0.790000] !!! base_Addr = 0xe08ee000 [ 0.790000] twi1, apb clock = 24000000 [ 0.800000] pcf8563 1-0051: retrieved date/time is not valid. [ 0.810000] pcf8563 1-0051: retrieved date/time is not valid. [ 0.810000] rtc (null): alarm rollover not handled [ 0.820000] **********start************ [ 0.820000] 0x40 [ 0.830000] 0xf8 [ 0.830000] 0x58 [ 0.830000] 0x0 [ 0.830000] 0x0 [ 0.830000] **********end************ [ 0.840000] !!! base_Addr = 0xe08f0400 [ 0.840000] twi2, apb clock = 24000000 [ 0.850000] rtc_detect,line:197 [ 0.850000] **********start************ [ 0.850000] 0x40 [ 0.850000] 0xf8 [ 0.860000] 0x58 [ 0.860000] 0x0 [ 0.860000] 0x0 [ 0.860000] **********end************ [ 0.870000] [pa_drv] start!!! [ 0.870000] [pa_drv] init end!!! [ 0.880000] pmu_pekoff_time = 6000 [ 0.890000] pmu_pekoff_en = 1 [ 0.890000] pmu_peklong_time = 1500 [ 0.890000] pmu_pekon_time = 1000 [ 0.900000] pmu_pwrok_time = 64 [ 0.900000] pmu_pwrnoe_time = 2000 [ 0.900000] pmu_intotp_en = 1 [ 0.910000] [AXP]POWER20_OFF_CTL:1908-->0x42 [ 0.910000] POWER20_PEK_SET:1925-->0x9d [ 0.920000] POWER20_PEK_SET:1936-->0x9d [ 0.920000] POWER20_PEK_SET:1945-->0x9d [ 0.920000] POWER20_PEK_SET:1956-->0x9d [ 0.930000] POWER20_PEK_SET:1968-->0x9d [ 0.930000] POWER20_HOTOVER_CTL:1977-->0x25 [ 0.940000] [AXP]last_rest_vol = 0, now_rest_vol = 31 [ 0.950000] [AXP]charger->rest_vol = 31 [ 0.950000] [mmc_pm]: no sdio card used in configuration [ 0.960000] [mmc]: sunximmc_init [ 0.960000] [mmc]: sunxi mmc controller using config : 0x1 [ 0.970000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0 [ 0.970000] [mmc]: mmc 0 power off !! [ 0.980000] [mmc]: mmc0 Probe: base:0xe08f2000 irq:32 dma:0 pdes:0xdf060000, ret 0. [ 0.990000] enter sun5i Audio codec!!! [ 0.990000] sun5i Audio codec successfully loaded.. [ 1.000000] dram_sysdev_init finished! [ 1.010000] [LCD] lcd_module_init [ 1.580000] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on [ 1.590000] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on [ 1.590000] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on [ 1.600000] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on [ 1.610000] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on [ 1.620000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc098865c [ 1.630000] [sw-ehci1]: open clock [ 1.650000] usb_passby en=1,passly=0 [ 1.650000] hci_port_configure en=1,config_cnt=0 [ 1.680000] ehci_irq: port change detect [ 1.680000] [sw-ehci1]: sw_usb_disable_ehci [ 1.680000] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc098865c [ 1.690000] hci_port_configure en=0,config_cnt=1 [ 1.700000] usb_passby en=0,passly=1 [ 1.700000] [sw-ehci1]: close clock [ 1.700000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc0988770 [ 1.710000] [sw-ohci1]: open clock [ 1.740000] hci_port_configure en=1,config_cnt=0 [ 1.740000] usb_passby en=1,passly=0 [ 1.800000] [sw-ohci1]: sw_usb_disable_ohci [ 1.800000] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc0988770 [ 1.810000] usb_passby en=0,passly=1 [ 1.820000] hci_port_configure en=0,config_cnt=1 [ 1.820000] [sw-ohci1]: close clock [ 1.830000] pcf8563 1-0051: retrieved date/time is not valid. [ 1.830000] pcf8563 1-0051: hctosys: invalid date/time [ 1.890000] init: width = 800 [ 1.890000] init: height = 480 [ 1.900000] init: s.st_size = 1536000 [ 1.980000] [mmc]: mmc 0 detect change, present 1 [ 2.160000] init: do_umount: /data [ 2.280000] [mmc]: mmc 0 power on !! [ 2.320000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !! [ 2.320000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !! [ 2.330000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !! [ 2.340000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !! [ 2.350000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !! [ 2.360000] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !! [ 2.550000] init: do_umount: /cache [ 2.600000] init: dont need format /dev/block/nandi [ 2.850000] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 2.880000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 2.970000] script parser fetch err. [ 2.970000] ctp_init_platform_resource: tp_reset request gpio fail! [ 3.090000] [i2c1] incomplete xfer (0x20) [ 3.240000] <<-GTP-INFO->>[1741]GTP driver install. [ 3.240000] ctp_fetch_sysconfig_para. [ 3.250000] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x5d, dirty_addr_buf: 0x5d. dirty_addr_buf[1]: 0xfffe [ 3.260000] ctp_fetch_sysconfig_para: ctp_twi_id is 1. [ 3.260000] goodix_ts_init: after fetch_sysconfig_para: normal_i2c: 0x5d. normal_i2c[1]: 0xfffe [ 3.270000] ctp_wakeup. [ 3.280000] [i2c1] incomplete xfer (0x20) [ 3.770000] <<-GTP-INFO->>[1445]GTP Driver Version:V1.2<2012/06/08> [ 3.770000] <<-GTP-INFO->>[1446]GTP Driver build@12:31:55,Jul 12 2012 [ 3.780000] <<-GTP-INFO->>[1447]GTP I2C address:0x5d [ 3.790000] [i2c1] incomplete xfer (0x20) [ 3.790000] [i2c1] incomplete xfer (0x20) [ 3.790000] [i2c1] incomplete xfer (0x20) [ 3.800000] [i2c1] incomplete xfer (0x20) [ 3.800000] [i2c1] incomplete xfer (0x20) [ 3.810000] [i2c1] incomplete xfer (0x20) [ 3.810000] [i2c1] incomplete xfer (0x20) [ 3.820000] [i2c1] incomplete xfer (0x20) [ 3.820000] [i2c1] incomplete xfer (0x20) [ 3.820000] [i2c1] incomplete xfer (0x20) [ 3.830000] [i2c1] incomplete xfer (0x20) [ 3.830000] [i2c1] incomplete xfer (0x20) [ 3.840000] [i2c1] incomplete xfer (0x20) [ 3.840000] [i2c1] incomplete xfer (0x20) [ 3.850000] [i2c1] incomplete xfer (0x20) [ 3.850000] [i2c1] incomplete xfer (0x20) [ 3.850000] [i2c1] incomplete xfer (0x20) [ 3.860000] [i2c1] incomplete xfer (0x20) [ 3.900000] [i2c1] incomplete xfer (0x20) [ 3.900000] [i2c1] incomplete xfer (0x20) [ 3.900000] [i2c1] incomplete xfer (0x20) [ 3.950000] [i2c1] incomplete xfer (0x20) [ 3.950000] [i2c1] incomplete xfer (0x20) [ 3.950000] [i2c1] incomplete xfer (0x20) [ 4.000000] [i2c1] incomplete xfer (0x20) [ 4.000000] [i2c1] incomplete xfer (0x20) [ 4.000000] [i2c1] incomplete xfer (0x20) [ 4.040000] [i2c1] incomplete xfer (0x20) [ 4.040000] [i2c1] incomplete xfer (0x20) [ 4.040000] [i2c1] incomplete xfer (0x20) [ 4.070000] [i2c1] incomplete xfer (0x20) [ 4.070000] [i2c1] incomplete xfer (0x20) [ 4.070000] [i2c1] incomplete xfer (0x20) [ 4.100000] [i2c1] incomplete xfer (0x20) [ 4.100000] [i2c1] incomplete xfer (0x20) [ 4.100000] [i2c1] incomplete xfer (0x20) [ 4.110000] [i2c1] incomplete xfer (0x20) [ 4.110000] [i2c1] incomplete xfer (0x20) [ 4.120000] [i2c1] incomplete xfer (0x20) [ 4.120000] [i2c1] incomplete xfer (0x20) [ 4.130000] [i2c1] incomplete xfer (0x20) [ 4.130000] [i2c1] incomplete xfer (0x20) [ 4.150000] [i2c1] incomplete xfer (0x20) [ 4.150000] [i2c1] incomplete xfer (0x20) [ 4.150000] [i2c1] incomplete xfer (0x20) [ 4.190000] [i2c1] incomplete xfer (0x20) [ 4.190000] [i2c1] incomplete xfer (0x20) [ 4.190000] [i2c1] incomplete xfer (0x20) [ 4.240000] [i2c1] incomplete xfer (0x20) [ 4.240000] [i2c1] incomplete xfer (0x20) [ 4.290000] <<-GTP-ERROR->>[1158]Send config error. ret = -70 [ 4.310000] [i2c1] incomplete xfer (0x20) [ 4.310000] [i2c1] incomplete xfer (0x20) [ 4.330000] [i2c1] incomplete xfer (0x20) [ 4.330000] [i2c1] incomplete xfer (0x20) [ 4.330000] [i2c1] incomplete xfer (0x20) [ 4.370000] <<-GTP-ERROR->>[1247]GTP i2c test failed time 1. [ 4.390000] [i2c1] incomplete xfer (0x20) [ 4.390000] [i2c1] incomplete xfer (0x20) [ 4.390000] [i2c1] incomplete xfer (0x20) [ 4.410000] [i2c1] incomplete xfer (0x20) [ 4.410000] [i2c1] incomplete xfer (0x20) [ 4.430000] <<-GTP-ERROR->>[1247]GTP i2c test failed time 2. [ 4.450000] [i2c1] incomplete xfer (0x20) [ 4.450000] [i2c1] incomplete xfer (0x20) [ 4.450000] [i2c1] incomplete xfer (0x20) [ 4.460000] [i2c1] incomplete xfer (0x20) [ 4.460000] [i2c1] incomplete xfer (0x20) [ 4.470000] <<-GTP-ERROR->>[1247]GTP i2c test failed time 3. [ 4.490000] [i2c1] incomplete xfer (0x20) [ 4.490000] [i2c1] incomplete xfer (0x20) [ 4.490000] [i2c1] incomplete xfer (0x20) [ 4.500000] [i2c1] incomplete xfer (0x20) [ 4.510000] [i2c1] incomplete xfer (0x20) [ 4.510000] <<-GTP-ERROR->>[1247]GTP i2c test failed time 4. [ 4.540000] [i2c1] incomplete xfer (0x20) [ 4.540000] [i2c1] incomplete xfer (0x20) [ 4.540000] [i2c1] incomplete xfer (0x20) [ 4.550000] [i2c1] incomplete xfer (0x20) [ 4.550000] [i2c1] incomplete xfer (0x20) [ 4.560000] <<-GTP-ERROR->>[1247]GTP i2c test failed time 5. [ 4.580000] <<-GTP-ERROR->>[1500]I2C communication ERROR! [ 4.580000] <<-GTP-INFO->>[1577]GTP driver is removing... [ 4.590000] =======ctp_free_platform_resource=========. [ 4.590000] gt811: probe of 1-005d failed with error -12 [ 4.600000] init: untracked pid 82 exited [ 4.640000] ctp_wakeup: [ 4.650000] [i2c1] incomplete xfer (0x20) [ 4.730000] ctp_detect: [ 4.750000] ctp_detect: [ 4.750000] ssd253x_ts_probe: [ 4.850000] [i2c1] incomplete xfer (0x20) [ 5.200000] SSL Touchscreen I2C Address: 0x48 [ 5.210000] [i2c1] incomplete xfer (0x20) [ 5.210000] [i2c1] incomplete xfer (0x20) [ 5.220000] [i2c1] incomplete xfer (0x20) [ 5.220000] [i2c1] incomplete xfer (0x20) [ 5.220000] SSL Touchscreen Device ID : 0xFFFF [ 5.230000] SSL Touchscreen Version ID : 0xFFFF [ 5.230000] ctp_detect: [ 5.250000] ========gsensor_fetch_sysconfig_para=================== [ 5.260000] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x18, dirty_addr_buf: 0x18. dirty_addr_buf[1]: 0xfffe [ 5.270000] gsensor_fetch_sysconfig_para: twi_id is 1. [ 5.270000] BMA250_init: after fetch_sysconfig_para: normal_i2c: 0x18. normal_i2c[1]: 0xfffe [ 5.330000] UMP: UMP device driver 22 loaded [ 5.480000] Mali: mali--2244-rel0! [ 5.490000] Mali: Mali device driver r2p4-02rel0-r22 loaded [ 5.520000] [cedar dev]: install start!!! [ 5.530000] [cedar dev]: install end!!! [ 6.030000] android_usb: already disabled [ 6.030000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f00, 0xdf022200, ep1-bulk) [ 6.040000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f00, 0xdf022200, ep1-bulk) [ 6.050000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f40, 0xdf022200, ep2-bulk) [ 6.060000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f00, 0xdf022200, ep1-bulk) [ 6.070000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f40, 0xdf022200, ep2-bulk) [ 6.070000] ep_matches, wrn: endpoint already claimed, ep(0xc08c1f80, 0xdf01d380, ep3-bulk) [ 6.080000] [sw_udc]: alloc request: ep(0xc08c1fc0, ep4-bulk, 512), req(0xdf38f240) [ 6.090000] [sw_udc]: alloc request: ep(0xc08c1f80, ep3-bulk, 512), req(0xdf38f280) [ 6.100000] [sw_udc]: alloc request: ep(0xc08c1f80, ep3-bulk, 512), req(0xdf38f2c0) [ 6.110000] [sw_udc]: alloc request: ep(0xc08c1f80, ep3-bulk, 512), req(0xdf38f300) [ 6.110000] [sw_udc]: alloc request: ep(0xc08c1f80, ep3-bulk, 512), req(0xdf38f340) [ 6.120000] [sw_udc]: sw_udc_pullup, is_on = 1 [ 6.130000] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active [ 7.100000] init: untracked pid 79 exited [ 7.100000] init: untracked pid 84 exited [ 10.180000] init: untracked pid 134 exited [ 10.200000] init: untracked pid 135 exited [ 10.960000] [AXP]init charger->rest_vol = 14 [ 10.960000] battery vol change: 31->14 [ 14.860000] init: untracked pid 176 exited [ 14.880000] init: untracked pid 175 exited [ 20.560000] init: untracked pid 204 exited [ 20.560000] init: untracked pid 205 exited [ 21.000000] battery vol change: 14->13 [ 25.220000] init: untracked pid 231 exited [ 25.220000] init: untracked pid 232 exited [ 29.910000] init: untracked pid 258 exited [ 29.930000] init: untracked pid 259 exited [ 35.580000] init: untracked pid 285 exited [ 35.620000] init: untracked pid 286 exited [ 40.280000] init: untracked pid 312 exited [ 40.310000] init: untracked pid 313 exited [ 44.990000] init: untracked pid 339 exited [ 44.990000] init: untracked pid 340 exited谢谢~
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号