Arch Linux 下使用 xfel 调试

[taotieren]

打包到 AUR 仓库的 xfel-git
PKGBUILD

# Maintainer: taotieren <admin@taotieren.com>

pkgname=xfel-git
pkgver=b2b4856
pkgrel=1
pkgdesc="Tiny FEL tools for allwinner SOC, support RISC-V D1 chip."
arch=('any')
url="https://github.com/xboot/xfel"
license=('MIT')
provides=(${pkgname})
conflicts=(${pkgname} ${pkgname%-git})
#replaces=(${pkgname})
depends=('libusb')
makedepends=('git')
backup=()
options=('!strip')
#install=${pkgname}.install
source=("${pkgname%-git}::git+${url}.git")
sha256sums=('SKIP')

pkgver() {
    cd "${srcdir}/${pkgname%-git}"
    git describe --always | sed 's|-|.|g'
}

build() {
    cd "${srcdir}/${pkgname%-git}"
    make
}

package() {
    install -Dm755 "${srcdir}/${pkgname%-git}/${pkgname%-git}" "${pkgdir}/usr/bin/${pkgname%-git}"
    install -Dm644 "${srcdir}/${pkgname%-git}/LICENSE" "${pkgdir}/usr/share/licenses/${pkgname%-git}/LICENSE"
}

打包到 AUR 仓库的 xfel
PKGBUILD

# Maintainer: taotieren <admin@taotieren.com>

pkgname=xfel
pkgver=1.0.1
pkgrel=1
pkgdesc="Tiny FEL tools for allwinner SOC, support RISC-V D1 chip."
arch=('any')
url="https://github.com/xboot/xfel"
license=('MIT')
provides=(${pkgname})
conflicts=(${pkgname} ${pkgname}-git)
#replaces=(${pkgname})
depends=('libusb')
makedepends=()
backup=()
options=('!strip')
#install=${pkgname}.install
source=("${pkgname}-${pkgver}.tar.gz::${url}/archive/refs/tags/v${pkgver}.tar.gz")
sha256sums=('85b8f1fe6a58149c9eb5c270e279f0dbedb882a349799a70105e4e415182aa9a')

build() {
    cd "${srcdir}/${pkgname}-${pkgver}"
    make
}

package() {
    install -Dm755 "${srcdir}/${pkgname}-${pkgver}/${pkgname}" "${pkgdir}/usr/bin/${pkgname}"
    install -Dm644 "${srcdir}/${pkgname}-${pkgver}/LICENSE" "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
}

xfel 功能

xfel 
xfel(v1.0.1) - https://github.com/xboot/xfel
usage:
    xfel help                                   - Print this usage
    xfel version                                - Show brom version
    xfel hexdump <address> <length>             - Dumps memory region in hex
    xfel dump <address> <length>                - Binary memory dump to stdout
    xfel exec <address>                         - Call function address
    xfel read32 <address>                       - Read 32-bits value from device memory
    xfel write32 <address> <value>              - Write 32-bits value to device memory
    xfel read <address> <length> <file>         - Read memory to file
    xfel write <address> <file>                 - Write file to memory
    xfel reset                                  - Reset device using watchdog
    xfel sid                                    - Show 128-bits sid information
    xfel jtag                                   - Enable jtag debug
    xfel ddr [type]                             - Initial ddr controller with optional type
    xfel spinor                                 - Detect spi nor flash
    xfel spinor read <address> <length> <file>  - Read spi nor flash to file
    xfel spinor write <address> <file>          - Write file to spi nor flash
    xfel spinand                                - Detect spi nand flash
    xfel spinand read <address> <length> <file> - Read spi nand flash to file
    xfel spinand write <address> <file>         - Write file to spi nand flash

Arch Linux 可以通过 yay -S xfel 安装 xfel 软件

[Kirin]

@taotieren 群里好像有伙伴问xfel的，可以分享给他嘻嘻嘻

[whycan]

用D1裸奔，xfel是个好工具，flash烧写目测作者还在编写中。