请问tina /etc/rc.d/ 里面的初始化脚本是按字典顺序执行吗？

[tigger]

root@TinaLinux:/# ls /etc/rc.d/S* -l
lrwxrwxrwx    1 root     root            20 Apr  6  2022 /etc/rc.d/S00sysfixtime -> ../init.d/sysfixtime
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S10boot -> ../init.d/boot
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S10dbus -> ../init.d/dbus
lrwxrwxrwx    1 root     root            16 Apr  6  2022 /etc/rc.d/S10system -> ../init.d/system
lrwxrwxrwx    1 root     root            16 Apr  6  2022 /etc/rc.d/S11sysctl -> ../init.d/sysctl
lrwxrwxrwx    1 root     root            17 Apr  6  2022 /etc/rc.d/S20network -> ../init.d/network
lrwxrwxrwx    1 root     root            15 Apr  6  2022 /etc/rc.d/S40fstab -> ../init.d/fstab
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S50cron -> ../init.d/cron
lrwxrwxrwx    1 root     root            18 Apr  6  2022 /etc/rc.d/S50dropbear -> ../init.d/dropbear
lrwxrwxrwx    1 root     root            17 Apr  6  2022 /etc/rc.d/S60dnsmasq -> ../init.d/dnsmasq
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S80adbd -> ../init.d/adbd
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S80udev -> ../init.d/udev
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S95done -> ../init.d/done
lrwxrwxrwx    1 root     root            24 Apr  6  2022 /etc/rc.d/S96wpa_supplicant -> ../init.d/wpa_supplicant
lrwxrwxrwx    1 root     root            13 Apr  6  2022 /etc/rc.d/S98mtp -> ../init.d/mtp
lrwxrwxrwx    1 root     root            14 Apr  6  2022 /etc/rc.d/S98play -> ../init.d/play
lrwxrwxrwx    1 root     root            17 Apr  6  2022 /etc/rc.d/S98sysntpd -> ../init.d/sysntpd
lrwxrwxrwx    1 root     root            21 Apr  6  2022 /etc/rc.d/S99lv_examples -> ../init.d/lv_examples
lrwxrwxrwx    1 root     root            18 Apr  6  2022 /etc/rc.d/S99lvgldemo -> ../init.d/lvgldemo
lrwxrwxrwx    1 root     root            29 Apr  6  2022 /etc/rc.d/S99swupdate_autorun -> ../init.d/S99swupdate_autorun
lrwxrwxrwx    1 root     root            18 Apr  6  2022 /etc/rc.d/S99tinatest -> ../init.d/tinatest
lrwxrwxrwx    1 root     root            15 Apr  6  2022 /etc/rc.d/S99ucgui -> ../init.d/ucgui

[tigger]

[    6.147927] procd: - init -
Please press Enter to activate this console.
[    6.282949]
[    6.282949] insmod_device_driver
[    6.282949]
[    6.559613] udevd[151]: starting version 3.2.9
-------------------ucgui --------------------
-------------------ucgui --------------------
........
[   22.349162] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[   22.724196] EXT4-fs (mmcblk0p5): warning: mounting unchecked fs, running e2fsck is recommended
[   23.605463] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
------------boot-play---------------
------------boot-play---------------
[   25.388938] [SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0
Trying to connect to SWUpdate...


BusyBox v1.27.2 () built-in shell (ash)

 _____  _              __     _
|_   _||_| ___  _ _   |  |   |_| ___  _ _  _ _
  | |   _ |   ||   |  |  |__ | ||   || | ||_'_|
  | |  | || | || _ |  |_____||_||_|_||___||_,_|
  |_|  |_||_|_||_|_|  Tina is Based on OpenWrt!
 ----------------------------------------------
 Tina Linux (Neptune, 5C1C9C53)
 ----------------------------------------------
root@TinaLinux:/#

不知道为啥 /etc/rc.d/S99ucgui 要先执行，
然后才执行 /etc/rc.d/S98play

[WM_CH]

@tigger 我觉得你可以加个echo试试，，，，，，，，，，

[tigger]

@wm_ch
嗯，我就是加 echo 命令测试出来的，上面日志里面就是echo显示的。