Navigation

    全志在线开发者论坛
    • Register
    • Login
    • Search
    • Categories
    • Tags
    • 在线文档
    • 社区主页

    试着用t113的uboot测试mipi屏幕,出现问题,能不能帮帮我

    D1系列-RISC-V
    2
    5
    441
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      smiletiger LV 6 last edited by whycan

      用的t113的sdk编译出来的uboot,自己修改了设备树,之前用的800x480的lcd在uboot下面已经用colorbar指令测试成功了,然后想测试手头的mipi屏幕,结果出现了个问题
      用disp指令显示,我配置的刷新率应该是59帧,实际只有25.5帧,colorbar测试失败,但是用mipi指令可以获取到屏幕的id值,说明mipi其实已经跑起来了,可能是时钟哪里配置不对,没有修改uboot源码,只是修改了设备树,按照mipi初始化指令增加了屏幕的指令,这个屏幕不需要额外的初始化指令,只需要一个0x29和0x11指令就可以显示的

      uboot打印的logo如下

      U-Boot 2018.05-g2a24076-dirty (May 13 2022 - 21:35:03 +0800) Allwinner Technology

[03.349].................................set debug mode=8[03.354]CPU:   Allwinner Family
[03.357]Model: sun8iw20
[03.359]DRAM:  128 MiB
[03.362]Relocation Offset is: 04f36000
[03.380]secure enable bit: 0
[03.383]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[03.389]gic: normal mode
[03.391]flash init start0
[03.393]workmode = 0,storage type = 3
spi sunxi_slave->max_hz:120000000 
SF: Detected w25q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
[03.409]sunxi flash init ok
[03.412]sunxi_flash_probe ok
[03.415]sunxi_flash_probe ok1
[03.417]line:703 init_clocks
[03.420]init_clocks:finish
[03.422]drv_disp_init
[03.430]get flash lcd idx 0
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[03.441]HDMI 2.0 driver init start!
[03.444]fdt_path_offset hdmi fail
[03.447]unable to map hdmi registers
[03.450]drv_disp_init finish
[03.453]boot_gui_init:start
[03.456]set disp.dev2_output_type fail. using defval=0
[03.461]lcd_open_flow=0
[03.463]lcd_clk_config--------------------------------
[03.468]-------------disp_al_lcd_get_clk_info
[03.472]DSI_VERSION_40
[03.474]DSI_VERSION_40 lcd_dsi_format=0
[03.477]tcon_div=4 lcd_div=1 dsi_div=6 dsi_rate=150000000
[03.482]lcd_rate=408000000 pll_rate=408000000 tcon_div=4
[03.488]pll_rate_set=408000000
[03.490]2222222222
[03.492]disp 0, clk: pll(408000000),clk(408000000),dclk(68000000) dsi_rate(150000000)
     clk real:pll(408000000),clk(408000000),dclk(102000000) dsi_rate(150000000)
[03.507]DSI_VERSION_40
[03.509]DSI_VERSION_40 lcd_dsi_format=0
[03.512]tcon_div=4 lcd_div=1 dsi_div=6 dsi_rate=150000000
[03.518]lcd_open_flow=0
[03.851]switch device: sel=0, type=1, mode=4, format=0, bits=0, eotf=4, cs=260
[03.858]boot_gui_init:finish
GUID P[03.861]lcd_open_flow=0
[03.873]lcd_panel_init dsi_dcs_write=29
get lcd id0 0x41 get lcd id15 0xff get lcd id16 0x0 readbytes=16
artition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: In[04.192]lcd_open_flow=0
valid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
partno erro : can't find partition bootloader
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
partno erro : can't find partition boot-resource
[04.238]Get bootloader and boot-resource partition number fail[04.244]lcd_open_flow=0
[04.247]lcd_open_flow=0
[04.249]lcd_open_flow=0
[04.251]LCD open finish
!
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[04.277]Loading Environment from SUNXI_FLASH... GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
*** Warning - no device, using default environment

Failed (-19)
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[04.334]update part info
[04.336]key 0
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[04.361]no misc partition is found
[04.364]update bootcmd
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
GUID Partition Table Header signature is wrong: 0xE07060200000000 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
ERROR: attempting read past flash size 
*** ERROR: Can't read GPT header ***
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[04.412]libfdt fdt_check_header(): FDT_ERR_BADMAGIC
[04.417]replace_fdt fail addr:0x43200000
disable nand error: FDT_ERR_NOTFOUND
[04.424](weak)update dtb dram start
[04.428]## error: update_fdt_dram_para : FDT_ERR_NOTFOUND
[04.434]update dts
Hit any key to stop autoboot:  0 
## Error: "distro_bootcmd" not defined
=> disp
screen 0:
de_rate 300000000 hz, ref_fps:59
mgr0: 720x1280 fmt[rgb] cs[0x204] range[full] eotf[0x4] bits[8bits] err[1] force_sync[0] unblank direct_show[false] iommu[0]
	lcd output	backlight(100)	fps:25.5	 720x1280
	err:0	skip:0	irq:0	vsync:0	vsync_skip:0	

=>

      希望有经验的朋友能不能帮我分析一下,是不是哪里时钟配置出错了

      uboot的dts文件如下

      /*
 * Allwinner Technology CO., Ltd. sun8iw20p1 soc board.
 *
 * soc board support.
 */
/dts-v1/;

#include "sun8iw20p1-soc-system.dtsi"

&platform {
	eraseflag   = <1>;
	next_work   = <3>;
	debug_mode  = <1>;
};

&target {
	boot_clock = <1008>;	/*CPU boot frequency, Unit: MHz*/
	storage_type = <0xffffffff>; /*boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan*/
	burn_key = <0>;		/*1:support burn key; 0:not support burn key*/
	dragonboard_test = <0>;	/*1:support card boot dragonboard; 0:not support card boot dragonboard*/
};

&charger0 {
	pmu_safe_vol = <3500>;
};

&twi6 {
	clock-frequency = <200000>;
	pinctrl-0 = <&s_twi0_pins_a>;
	no_suspend = <1>;
	twi_drv_used = <1>;
	status = "okay";
};

&pwm7_pin_a {
	pins = "PD22";
	function = "pwm7";
	muxsel = <5>;
	drive-strength = <10>;
	bias-pull-up;
};

&pwm7_pin_b {
	pins = "PD22";
	muxsel = <0>;
	function = "gpio_out";
};

&pwm7 {
	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&pwm7_pin_a>;
	pinctrl-1 = <&pwm7_pin_b>;
	status = "okay";
};

&sdc0_pins_a {
	allwinner,pins = "PF0", "PF1", "PF2",
			 "PF3", "PF4", "PF5";
	allwinner,function = "sdc0";
	allwinner,muxsel = <2>;
	allwinner,drive = <3>;
	allwinner,pull = <1>;
	pins = "PF0", "PF1", "PF2",
	       "PF3", "PF4", "PF5";
	function = "sdc0";
	drive-strength = <30>;
	bias-pull-up;
	power-source = <3300>;
};

&sdc0_pins_b {
	pins = "PF0", "PF1", "PF2",
	       "PF3", "PF4", "PF5";
	function = "sdc0";
	drive-strength = <30>;
	bias-pull-up;
	power-source = <1800>;
};

&sdc0_pins_c {
		pins = "PF0", "PF1", "PF2",
			"PF3", "PF4", "PF5";
		function = "gpio_in";
};

&sdc2_pins_a {
	allwinner,pins = "PC2", "PC3", "PC4",
			 "PC5", "PC6", "PC7";
	allwinner,function = "sdc2";
	allwinner,muxsel = <3>;
	allwinner,drive = <3>;
	allwinner,pull = <1>;
	pins = "PC2", "PC3", "PC4",
		"PC5", "PC6", "PC7";
	function = "sdc2";
	drive-strength = <30>;
	bias-pull-up;

};

&sdc2_pins_b {
	pins = "PC2", "PC3", "PC4",
	       "PC5", "PC6", "PC7";
	function = "gpio_in";
};

&nand0_pins_a {
	allwinner,pins = "PC0", "PC1", "PC2", "PC5",
			 "PC8", "PC9", "PC10", "PC11",
			 "PC12", "PC13", "PC14", "PC15",
			 "PC16";
	allwinner,pname= "nand0_we", "nand0_ale","nand0_cle", "nand0_nre",
			 "nand0_d0", "nand0_d1", "nand0_d2", "nand0_d3",
			 "nand0_d4", "nand0_d5", "nand0_d6", "nand0_d7",
			 "nand0_ndqs";
	allwinner,function = "nand0";
	allwinner,muxsel = <2>;
	allwinner,drive = <1>;
	allwinner,pull = <0>;
};

&nand0_pins_b {
	allwinner,pins = "PC4", "PC6", "PC03", "PC07";
	allwinner,pname= "nand0_ce0", "nand0_rb0", "nand0_ce1", "nand0_rb1";
	allwinner,function = "nand0";
	allwinner,muxsel = <2>;
	allwinner,drive = <1>;
	allwinner,pull = <1>;	/* only RB&CE should be pulled up */
};

&nand0_pins_c {
	allwinner,pins = "PC0", "PC1", "PC2", "PC3",
			 "PC4", "PC5", "PC6", "PC7",
			 "PC8", "PC9", "PC10", "PC11",
			 "PC12", "PC13", "PC14", "PC15",
			 "PC16";
	allwinner,function = "io_disabled";
	allwinner,muxsel = <7>;
	allwinner,drive = <1>;
	allwinner,pull = <0>;
};

&spi0_pins_a {
	allwinner,pins = "PC2", "PC4", "PC5";
	allwinner,pname = "spi0_sclk", "spi0_mosi", "spi0_miso";
	allwinner,function = "spi0";
	allwinner,muxsel = <2>;
	allwinner,drive = <1>;
	allwinner,pull = <0>;
};

&spi0_pins_b {
	allwinner,pins = "PC3", "PC7", "PC6";
	allwinner,pname = "spi0_cs0", "spi0_hold", "spi0_wp";
	allwinner,function = "spi0";
	allwinner,muxsel = <2>;
	allwinner,drive = <1>;
	allwinner,pull = <1>;   // only CS should be pulled up
};

&spi0_pins_c {
	allwinner,pins = "PC2", "PC3", "PC4", "PC5",
			"PC6", "PC7";
	allwinner,function = "gpio_in";
	allwinner,muxsel = <0>;
	allwinner,drive = <1>;
	allwinner,pull = <0>;
};

&card0_boot_para {  /* Avoid dtc compiling warnings. @TODO: Developer should modify this to the actual value */
	/* reg = <0x0 0x2 0x0 0x0>;  [> Avoid dtc compiling warnings. @TODO: Developer should modify this to the actual value <] */
	device_type = "card0_boot_para";
	card_ctrl = <0x0>;
	card_high_speed = <0x1>;
	card_line = <0x4>;
	pinctrl-0 = <&sdc0_pins_a>;
};

&card2_boot_para {  /* Avoid dtc compiling warnings. @TODO: Developer should modify this to the actual value */
	/* reg = <0x0 0x3 0x0 0x0>;  [> Avoid dtc compiling warnings. @TODO: Developer should modify this to the actual value <] */
	device_type = "card2_boot_para";
	card_ctrl = <0x2>;
	card_high_speed = <0x1>;
	card_line = <0x4>;
	pinctrl-0 = <&sdc2_pins_a>;
	sdc_ex_dly_used = <0x2>;
	sdc_io_1v8 = <0x1>;
	sdc_tm4_win_th = <0x08>;
	sdc_tm4_hs200_max_freq = <150>;
	sdc_tm4_hs400_max_freq = <100>;
	sdc_type = "tm4";
};
&gpio_bias {  /* Avoid dtc compiling warnings. @TODO: Developer should modify this to the actual value */
	device_type = "gpio_bias";
	pc_bias = <1800>;
};

&nand0 {
	compatible = "allwinner,sun8iw20-nand";
	device_type = "nand0";
	//reg = <0x0 0x04011000 0x0 0x1000>;/* nand0 */
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&nand0_pins_a &nand0_pins_b>;
	pinctrl-1 = <&nand0_pins_c>;
	nand0_regulator1 = "vcc-nand";
	nand0_regulator2 = "none";
	nand0_cache_level = <0x55aaaa55>;
	nand0_flush_cache_num = <0x55aaaa55>;
	nand0_capacity_level = <0x55aaaa55>;
	nand0_id_number_ctl = <0x55aaaa55>;
	nand0_print_level = <0x55aaaa55>;
	nand0_p0 = <0x55aaaa55>;
	nand0_p1 = <0x55aaaa55>;
	nand0_p2 = <0x55aaaa55>;
	nand0_p3 = <0x55aaaa55>;
	chip_code = "sun8iw20";
	status = "disabled";
};

&spi0 {
	clock-frequency = <100000000>;
	pinctrl-0 = <&spi0_pins_a &spi0_pins_b>;
	pinctrl-1 = <&spi0_pins_c>;
	pinctrl-names = "default", "sleep";
	/*spi-supply = <&reg_dcdc1>;*/
	spi_slave_mode = <0>;
	spi0_cs_number = <1>;
	spi0_cs_bitmap = <1>;
	status = "okay";

	spi-nand@0 {
		compatible = "spi-nand";
		spi-max-frequency=<0x5F5E100>;
		reg = <0x0>;
		spi-rx-bus-width=<0x04>;
		spi-tx-bus-width=<0x04>;
		status="okay";
	};
};

&disp {
	disp_init_enable         = <1>;
	disp_mode                = <0>;

	screen0_output_type      = <1>;
	screen0_output_mode      = <4>;

	screen1_output_type      = <3>;
	screen1_output_mode      = <10>;

	screen1_output_format    = <0>;
	screen1_output_bits      = <0>;
	screen1_output_eotf      = <4>;
	screen1_output_cs        = <257>;
	screen1_output_range     = <2>;
	screen1_output_scan      = <0>;
	screen1_output_aspect_ratio = <8>;

	dev0_output_type         = <1>;
	dev0_output_mode         = <4>;
	dev0_screen_id           = <0>;
	dev0_do_hpd              = <0>;

	dev1_output_type         = <4>;
	dev1_output_mode         = <10>;
	dev1_screen_id           = <1>;
	dev1_do_hpd              = <1>;

	def_output_dev           = <0>;

	fb0_format               = <0>;
	fb0_width                = <0>;
	fb0_height               = <0>;

	fb1_format               = <0>;
	fb1_width                = <0>;
	fb1_height               = <0>;
	chn_cfg_mode             = <1>;

	disp_para_zone           = <1>;
	/*VCC-LCD*/
/*	dc1sw-supply = <&reg_dc1sw>;*/
	/*VCC-DSI*/
/*	eldo3-supply = <&reg_eldo3>;*/
	/*VCC-PD*/
/*	dcdc1-supply = <&reg_dcdc1>;*/
};
/*800x480 tft*/
/*
&lcd0 {
	lcd_used            = <1>;

	lcd_driver_name     = "default_lcd";
	lcd_backlight       = <100>;
	lcd_if              = <0>;

	lcd_x               = <800>;
	lcd_y               = <480>;
	lcd_width           = <150>;
	lcd_height          = <94>;
	lcd_dclk_freq       = <36>;
	lcd_hv_clk_phase    = <0>;
	lcd_hv_sync_polarity= <3>;

	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <20000>;
	lcd_pwm_pol         = <0>;

	lcd_hbp             = <46>;
	lcd_ht              = <1055>;
	lcd_hspw            = <0>;
	lcd_vbp             = <23>;
	lcd_vt              = <525>;
	lcd_vspw            = <0>;

	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <1>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <1>;
	lcd_io_phase        = <0x0000>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;

	pinctrl-0 = <&rgb18_pins_a>;
	pinctrl-1 = <&rgb18_pins_b>;
};

&aliases {
	nand0 = &nand0;
	twi6 = &twi6;
	pwm = &pwm;
	pwm0 = &pwm0;
	pwm1 = &pwm1;
	pwm2 = &pwm2;
	pwm3 = &pwm3;
	pwm4 = &pwm4;
	pwm5 = &pwm5;
	pwm6 = &pwm6;
	pwm7 = &pwm7;
	disp = &disp;
	lcd0 = &lcd0;
	lcd1 = &lcd1;
	eink = &eink;
	spi0 = &spi0;
};
*/

&lcd0 {
	/* part 1 */
lcd_used            = <1>;
lcd_driver_name     = "lq055k3sx02";
	/* part 2 */
lcd_if = <4>;
lcd_dsi_if = <0>;
	/* part 3 */
lcd_x = <720>;
lcd_y = <1280>;
lcd_width = <135>;
lcd_height = <216>;
lcd_dclk_freq = <68>;
lcd_hbp = <40>;
lcd_ht = <870>;
lcd_hspw = <10>;
lcd_vbp = <11>;
lcd_vt = <1305>;
lcd_vspw = <1>;
/* part 4 */
lcd_backlight = <100>;
lcd_pwm_used = <1>;
lcd_pwm_ch = <7>;
lcd_pwm_freq = <20000>;
lcd_pwm_pol = <0>;
lcd_pwm_max_limit = <100>;
//lcd_bl_en = <&pio PD 22 1 0 3 1>;//pwm7 pd22
lcd_bright_curve_en = <0>;
/* part 5 */
lcd_dsi_lane = <4>;
lcd_dsi_format = <0>;
lcd_dsi_te = <0>;
/* part 6 */
lcd_frm = <0>;
lcd_gamma_en = <0>;
lcd_cmap_en = <0>;
/* part 7 */
//lcd_pin_power = "dcdc1";
//lcd_pin_power1 = "eldo3";
//lcd_power = "dc1sw";
lcd_gpio_0 = <&pio PG 10 1 0 3 1>;//rst(PG10)  
lcd_gpio_1 = <&pio PG 13 1 0 3 1>;//   led(PG13)
pinctrl-0 = <&dsi4lane_pins_a>;
pinctrl-1 = <&dsi4lane_pins_b>;

};

&aliases {
	nand0 = &nand0;
	twi6 = &twi6;
	pwm = &pwm;
	pwm0 = &pwm0;
	pwm1 = &pwm1;
	pwm2 = &pwm2;
	pwm3 = &pwm3;
	pwm4 = &pwm4;
	pwm5 = &pwm5;
	pwm6 = &pwm6;
	pwm7 = &pwm7;
	disp = &disp;
	lcd0 = &lcd0;
	lcd1 = &lcd1;
	eink = &eink;
	spi0 = &spi0;
};
      W 1 Reply Last reply Reply Quote Share 0
      • W
        whycan晕哥 LV 9 @smiletiger last edited by

        @smiletiger
        我也出现一模一样的问题了,

        同样的D1s板子，同一个固件，淘宝上面买的渣ＴＦ卡，有一张卡不正常：

        [32]HELLO! BOOT0 is starting!
[35]BOOT0 commit : 88480af-dirty
[38]set pll start
[40]periph0 has been enabled
[43]set pll end
[44][pmu]: bus read error
[47]board init ok
[48]ZQ value = 0x30
[50]get_pmu_exist() = -1
[53]ddr_efuse_type: 0xa
[55]trefi:7.8ms
[57][AUTO DEBUG] single rank and full DQ!
[61]ddr_efuse_type: 0xa
[63]trefi:7.8ms
[65][AUTO DEBUG] rank 0 row = 13
[68][AUTO DEBUG] rank 0 bank = 4
[71][AUTO DEBUG] rank 0 page size = 2 KB
[75]DRAM BOOT DRIVE INFO: V0.33
[78]DRAM CLK = 528 MHz
[80]DRAM Type = 2 (2:DDR2,3:DDR3)
[83]DRAMC read ODT  off.
[86]DRAM ODT off.
[87]ddr_efuse_type: 0xa
[90]DRAM SIZE =64 M
[92]dram_tpr4:0x0
[94]PLL_DDR_CTRL_REG:0xf8002b00
[97]DRAM_CLK_REG:0xc0000000
[99][TIMING DEBUG] MR2= 0x0
[104]DRAM simple test OK.
[106]dram size =64
[108]card no is 0
[109]sdcard 0 line count 4
[112][mmc]: mmc driver ver 2021-04-2 16:45
[121][mmc]: Wrong media type 0x0
[124][mmc]: ***Try SD card 0***
[133][mmc]: HSSDR52/SDR25 4 bit
[136][mmc]: 50000000 Hz
[138][mmc]: 3763 MB
[140][mmc]: ***SD/MMC 0 init OK!!!***
[179]Loading boot-pkg Succeed(index=0).
[182]Entry_name        = opensbi
[186]Entry_name        = u-boot
[189]Entry_name        = dtb
[192]mmc not para
▒193]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 08 2023 - 22:56:48 +0800) Allwinner Technology

[00.203]DRAM:  64 MiB
[00.206]Relocation Offset is: 01f27000
[00.210]secure enable bit: 0
[00.213]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.219]flash init start
[00.221]workmode = 0,storage type = 1
[00.225][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.230][mmc]: get sdc_type fail and use default host:tm1.
[00.237][mmc]: can't find node "mmc0",will add new node
[00.242][mmc]: fdt err returned <no error>
[00.246][mmc]: Using default timing para
[00.249][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.267][mmc]: card_caps:0x3000000a
[00.270][mmc]: host_caps:0x3000003f
[00.274]sunxi flash init ok
[00.276]line:703 init_clocks
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.304]Loading Environment from SUNXI_FLASH... GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
Can't find env partition
*** Warning - no device, using default environment

Failed (-19)
[00.340]out of usb burn from boot: not need burn key
cann't get the boot_base from the env
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.364]Item0 (Map) magic is bad
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
partno erro : can't find partition private
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.417]update part info
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.443]update bootcmd
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.492]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.527]update dts
noncached_alloc(): addr = 0x42b4ba00
noncached_alloc(): addr = 0x42b4ba40
noncached_alloc(): addr = 0x42b4ba80
noncached_alloc(): addr = 0x42b4c2c0
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.547]Board Net Initialization Failed
[00.551]No ethernet found.
Hit any key to stop autoboot:  0
## Error: "distro_bootcmd" not defined
=>
=>
=>

        有一张正常:

        [35]HELLO! BOOT0 is starting!
[38]BOOT0 commit : 88480af-dirty
[41]set pll start
[43]periph0 has been enabled
[46]set pll end
[48][pmu]: bus read error
[50]board init ok
[52]ZQ value = 0x30
[54]get_pmu_exist() = -1
[56]ddr_efuse_type: 0xa
[58]trefi:7.8ms
[60][AUTO DEBUG] single rank and full DQ!
[64]ddr_efuse_type: 0xa
[66]trefi:7.8ms
[68][AUTO DEBUG] rank 0 row = 13
[71][AUTO DEBUG] rank 0 bank = 4
[75][AUTO DEBUG] rank 0 page size = 2 KB
[78]DRAM BOOT DRIVE INFO: V0.33
[81]DRAM CLK = 528 MHz
[83]DRAM Type = 2 (2:DDR2,3:DDR3)
[87]DRAMC read ODT  off.
[89]DRAM ODT off.
[91]ddr_efuse_type: 0xa
[93]DRAM SIZE =64 M
[95]dram_tpr4:0x0
[97]PLL_DDR_CTRL_REG:0xf8002b00
[100]DRAM_CLK_REG:0xc0000000
[102][TIMING DEBUG] MR2= 0x0
[107]DRAM simple test OK.
[109]dram size =64
[111]card no is 0
[113]sdcard 0 line count 4
[115][mmc]: mmc driver ver 2021-04-2 16:45
[125][mmc]: Wrong media type 0x0
[127][mmc]: ***Try SD card 0***
[140][mmc]: HSSDR52/SDR25 4 bit
[143][mmc]: 50000000 Hz
[145][mmc]: 3780 MB
[147][mmc]: ***SD/MMC 0 init OK!!!***
[191]Loading boot-pkg Succeed(index=0).
[195]Entry_name        = opensbi
[198]Entry_name        = u-boot
[202]Entry_name        = dtb
[204]mmc not para
▒206]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 09 2023 - 21:12:54 +0800) Allwinner Technology

[00.216]DRAM:  64 MiB
[00.218]Relocation Offset is: 01f27000
[00.222]secure enable bit: 0
[00.226]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.232]flash init start
[00.234]workmode = 0,storage type = 1
[00.237][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.243][mmc]: get sdc_type fail and use default host:tm1.
[00.250][mmc]: can't find node "mmc0",will add new node
[00.254][mmc]: fdt err returned <no error>
[00.258][mmc]: Using default timing para
[00.262][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.282][mmc]: card_caps:0x3000000a
[00.285][mmc]: host_caps:0x3000003f
[00.290]sunxi flash init ok
[00.292]line:703 init_clocks
[00.318]Loading Environment from SUNXI_FLASH... OK
[00.343]out of usb burn from boot: not need burn key
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.363]Item0 (Map) magic is bad
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.380]update part info
[00.385]update bootcmd
[00.390]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.425]update dts
noncached_alloc(): addr = 0x42b4afc0
noncached_alloc(): addr = 0x42b4b000
noncached_alloc(): addr = 0x42b4b040
noncached_alloc(): addr = 0x42b4b880
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.445]Board Net Initialization Failed
[00.448]No ethernet found.
Hit any key to stop autoboot:  0
[00.656]no vendor_boot partition is found
Android's image name: d1s-whycanpih
Detect comp gzip
[00.935]
Starting kernel ...

[00.938][mmc]: MMC Device 2 not found
[00.941][mmc]: mmc 2 not find, so not exit
▒** 17 printk messages dropped **
[    0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 56316K/65536K available (4943K kernel code, 428K rwdata, 1914K rodata, 156K init, 237K bss, 9220K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000032] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[    0.000437] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.001236] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001261] pid_max: default: 32768 minimum: 301
[    0.001480] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.001504] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.003805] ASID allocator initialised with 65536 entries
[    0.004015] rcu: Hierarchical SRCU implementation.
[    0.004826] devtmpfs: initialized
[    0.025392] random: get_random_u32 called from bucket_table_alloc.isra.27+0x10a/0x12c with crng_init=0
[    0.026850] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026891] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.027080] pinctrl core: initialized pinctrl subsystem
[    0.028945] NET: Registered protocol family 16
[    0.030003] DMA: preallocated 256 KiB pool for atomic allocations
[    0.035896] cpuidle: using governor menu
[    0.145503] rtc_ccu: sunxi ccu init OK
[    0.156066] clock: sunxi ccu init OK
[    0.157489] clock: sunxi ccu init OK
[    0.290983] iommu: Default domain type: Translated
[    0.291915] sunxi iommu: irq = 4
[    0.295166] SCSI subsystem initialized
[    0.296614] usbcore: registered new interface driver usbfs
[    0.296940] usbcore: registered new interface driver hub
[    0.297252] usbcore: registered new device driver usb
[    0.298245] mc: Linux media interface: v0.10
[    0.298684] videodev: Linux video capture interface: v2.00
[    0.304674] Advanced Linux Sound Architecture Driver Initialized.
[    0.306109] Bluetooth: Core ver 2.22
[    0.306386] NET: Registered protocol family 31
[    0.306402] Bluetooth: HCI device and connection manager initialized
[    0.306429] Bluetooth: HCI socket layer initialized
[    0.306444] Bluetooth: L2CAP socket layer initialized
[    0.306498] Bluetooth: SCO socket layer initialized
[    0.307200] pwm module init!
[    0.310031] g2d 5410000.g2d: Adding to iommu group 0
[    0.310996] G2D: rcq version initialized.major:251
[    0.312811] clocksource: Switched to clocksource riscv_clocksource
[    0.334719] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.343333] NET: Registered protocol family 2
[    0.344718] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.344777] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344806] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344824] TCP: Hash tables configured (established 512 bind 512)
[    0.345003] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345058] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345364] NET: Registered protocol family 1
[    0.347805] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.348690] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.349244] sunxi_spi_resource_get()2151 - [spi0] SPI MASTER MODE
[    0.349325] sunxi_spi_resource_get()2189 - Failed to get sample mode
[    0.349337] sunxi_spi_resource_get()2194 - Failed to get sample delay
[    0.349349] sunxi_spi_resource_get()2198 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.349431] sunxi_spi_clk_init()2240 - [spi0] mclk 100000000
[    0.351018] sunxi_spi_probe()2653 - [spi0]: driver probe succeed, base ffffffd004058000, irq 31
[    0.356804] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[    0.392652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.394012] ntfs: driver 2.1.32 [Flags: R/W].
[    0.425659] io scheduler mq-deadline registered
[    0.425677] io scheduler kyber registered
[    0.427921] [DISP]disp_module_init
[    0.428947] disp 5000000.disp: Adding to iommu group 0
[    0.479607] display_fb_request,fb_id:0
[    0.483653] [DISP] Fb_copy_boot_fb,line:1443:
[    0.483658] no boot_fb0
[    0.484431] disp_al_manager_apply ouput_type:0
[    0.484914] [DISP] lcd_clk_config,line:744:
[    0.484931] disp 0, clk: pll(224000000),clk(224000000),dclk(8000000) dsi_rate(224000000)
[    0.484931]      clk real:pll(288000000),clk(288000000),dclk(10285714) dsi_rate(0)
[    0.484990] LCD_open_flow line136: 1111111111111111111111111111111111
[    0.485004] LCD_power_on line158: 1111111111111111111111111111111111
[    0.486182] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[    0.487407] [DISP]disp_module_init finish
[    0.489365] sunxi_sid_init()551 - insmod ok
[    0.490695] pwm-regulator: supplied by regulator-dummy
[    0.494140] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.494754] uart uart1: get regulator failed
[    0.494792] uart uart1: uart1 supply uart not found, using dummy regulator
[    0.496189] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[    0.497418] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    0.497965] uart uart3: get regulator failed
[    0.498002] uart uart3: uart3 supply uart not found, using dummy regulator
[    0.498689] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI
[    0.498722] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    0.613592] LCD_panel_init line200: 1111111111111111111111111111111111
[    0.613599] [ST7789V LCD INFO] LINE:0201-->LCD_panel_init:
[    0.613604] [ST7789V LCD INFO] LINE:0202-->LCD_panel_init:init statr!
[    0.613606] ili9327 statr
[    0.613612] lcd_panel_ili9327_init line218: 1111111111111111111111111111111111
[    0.613617] lcd_panel_ili9327_init line219: 1111111111111111111111111111111111
[    0.613622] lcd_panel_ili9327_init line220: 1111111111111111111111111111111111
[    0.613627] [ST7789V LCD INFO] LINE:0222-->lcd_panel_ili9327_init:
[    0.633378] [ST7789V LCD INFO] LINE:0226-->lcd_panel_ili9327_init:reset do!
[    0.633383] ili9327 reset!
[    1.061128] ili9327 init over!
[    1.223203] LCD_bl_open line182: 1111111111111111111111111111111111
[    1.223210] [ST7789V LCD INFO] LINE:0183-->LCD_bl_open:bl open!
[    1.223212] ili9327 open
[    1.223533] [DISP] disp_device_attached_and_enable,line:233:
[    1.223540] attached ok, mgr0<-->dev0
[    1.223544] [DISP] disp_device_attached_and_enable,line:236:
[    1.223557] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8
[    1.287862] printk: console [ttyS3] enabled
[    1.295053] misc dump reg init
[    1.300955] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    1.308725] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    1.316253] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    1.323863] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    1.330380] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    1.337529] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    1.345388] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    1.353439] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    1.361550] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    1.369606] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    1.376626] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    1.384329] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=141 assert=0
[    1.391969] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    1.404966] [ADDR_MGT] addr_mgt_probe: module version: v1.0.10
[    1.413930] [ADDR_MGT] addr_mgt_probe: success.
[    1.421428] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[    1.429684] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    1.437867] sunxi-spinand-phy: not detect any munufacture from id table
[    1.445517] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.452176] sunxi-spinand-phy: get phy info from fdt fail
[    1.458432] sunxi-spinand-phy: not detect munufacture from fdt
[    1.465359] sunxi-spinand-phy: detect munufacture from id table: GD
[    1.472396] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.479114] sunxi-spinand-phy: get phy info from fdt fail
[    1.485264] sunxi-spinand-phy: not detect munufacture from fdt
[    1.491820] sunxi-spinand-phy: not match spinand: f1c8f1c8 f1c8f1c8
[    1.500032] libphy: Fixed MDIO Bus: probed
[    1.505646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.513263] sunxi-ehci: EHCI SUNXI driver
[    1.518445] get ehci0-controller wakeup-source is fail.
[    1.524641] sunxi ehci0-controller don't init wakeup source
[    1.530928] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe00076f910, 0x:ffffffd00406f000, irq_no:2e
[    1.544618] [sunxi-ehci0]: Not init ehci0
[    1.549821] get ehci1-controller wakeup-source is fail.
[    1.556114] sunxi ehci1-controller don't init wakeup source
[    1.562405] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0007700a0, 0x:ffffffd004073000, irq_no:31
[    1.576146] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    1.589134] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    1.601819] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    1.609204] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.619306] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[    1.652885] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    1.662384] hub 1-0:1.0: USB hub found
[    1.667096] hub 1-0:1.0: 1 port detected
[    1.673442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.680456] sunxi-ohci: OHCI SUNXI driver
[    1.686319] get ohci0-controller wakeup-source is fail.
[    1.692289] sunxi ohci0-controller don't init wakeup source
[    1.698759] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe00076fcd8
[    1.709320] [sunxi-ohci0]: Not init ohci0
[    1.714640] get ohci1-controller wakeup-source is fail.
[    1.720690] sunxi ohci1-controller don't init wakeup source
[    1.727269] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000770468
[    1.737889] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[    1.750901] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    1.763569] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    1.770883] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.781408] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[    1.858499] hub 2-0:1.0: USB hub found
[    1.863208] hub 2-0:1.0: 1 port detected
[    1.869955] sunxi_gpadc_init,2151, success
[    1.875866] sunxi_gpadc_setup: get channel scan data failed
[    1.883334] input: sunxi-gpadc0 as /devices/virtual/input/input0
[    1.895405] sunxi-rtc 7090000.rtc: registered as rtc0
[    1.901265] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T04:02:42 UTC (14562)
[    1.911365] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.917931] i2c /dev entries driver
[    1.922493] IR NEC protocol handler initialized
[    1.928116] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    1.940457] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    1.948690] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    1.960835] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    1.969608] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    1.981799] usbcore: registered new interface driver uvcvideo
[    1.988838] USB Video Class driver (1.1.1)
[    1.993597] sunxi cedar version 1.1
[    1.997842] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    2.004346] VE: install start!!!
[    2.004346]
[    2.010362] VE: cedar-ve the get irq is 6
[    2.010362]
[    2.017218] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[    2.017218]
[    2.028944] VE: install end!!!
[    2.028944]
[    2.034098] VE: sunxi_cedar_probe
[    2.038489] Bluetooth: HCI UART driver ver 2.3
[    2.043917] Bluetooth: HCI UART protocol H4 registered
[    2.049743] Bluetooth: HCI UART protocol BCSP registered
[    2.055791] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    2.063350] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[    2.069843] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[    2.076617] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[    2.076617]
[    2.085437] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[    2.096723] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.107138] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    2.113483] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    2.119860] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    2.126599] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    2.133128] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    2.139687] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    2.146352] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    2.152934] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    2.160077] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    2.165563] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    2.172475] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.183909] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.202921] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.227584] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.233340] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.246119] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.256697] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.263024] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.269466] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.276015] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.287717] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.294298] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.300821] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.307629] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.314306] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.320912] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.330097] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.342761] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.354387] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.363756] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.375412] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.399922] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.407711] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.415499] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.422420] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.434840] sunxi_led_probe()1751 - start
[    2.439740] sunxi_get_str_of_property()1597 - failed to get the string of propname led_regulator!
[    2.450066] sunxi_register_led_classdev()1485 - led_classdev start
[    2.458589] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.472453] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.481921] sunxi_led_probe()1847 - finish
[    2.488557] ledtrig-cpu: registered to indicate activity on CPUs
[    2.496828] ashmem: initialized
[    2.500495] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.512463] exFAT: Version 1.3.0
[    2.516119] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.523319] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.535036] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.542805] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.550505] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.557360] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.570218] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.588877] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.588877]
[    2.606464] mmc0: new high speed SDHC card at address 0001
[    2.614631] mmcblk0: mmc0:0001 3333 3.69 GiB
[    2.619846] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.634941] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    2.644853]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.651190] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[    2.663456] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.673623] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.683254] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.695942] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[    2.709314] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    2.722526] NET: Registered protocol family 10
[    2.727679] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    2.737647] Segment Routing with IPv6
[    2.742026] NET: Registered protocol family 17
[    2.747617] Bluetooth: RFCOMM TTY layer initialized
[    2.753476] Bluetooth: RFCOMM socket layer initialized
[    2.759287] Bluetooth: RFCOMM ver 1.11
[    2.797946] sunxi-i2c sunxi-i2c0: sunxi-i2c0 supply twi not found, using dummy regulator
[    2.817440] sunxi-i2c sunxi-i2c0: probe success
[    2.824419] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    2.836820] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    2.845188] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    2.857286] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    2.866115] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    2.879560] clk: Not disabling unused clocks
[    2.884886] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.895096] ALSA device list:
[    2.898411]   #0: audiocodec
[    2.901685] alloc_fd: slot 0 not NULL!
[    2.906068] cfg80211: failed to load regulatory.db
[    2.920827] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[    2.934454] devtmpfs: mounted
[    2.937996] Freeing unused kernel memory: 156K
[    2.943068] This architecture does not have kernel memory protection.
        1 Reply Last reply Reply Quote Share 0
        • W
          whycan晕哥 LV 9 last edited by

          @smiletiger
          我也出现一模一样的问题了,

          同样的D1s板子，同一个固件，淘宝上面买的渣ＴＦ卡，有一张卡不正常：

          [32]HELLO! BOOT0 is starting!
[35]BOOT0 commit : 88480af-dirty
[38]set pll start
[40]periph0 has been enabled
[43]set pll end
[44][pmu]: bus read error
[47]board init ok
[48]ZQ value = 0x30
[50]get_pmu_exist() = -1
[53]ddr_efuse_type: 0xa
[55]trefi:7.8ms
[57][AUTO DEBUG] single rank and full DQ!
[61]ddr_efuse_type: 0xa
[63]trefi:7.8ms
[65][AUTO DEBUG] rank 0 row = 13
[68][AUTO DEBUG] rank 0 bank = 4
[71][AUTO DEBUG] rank 0 page size = 2 KB
[75]DRAM BOOT DRIVE INFO: V0.33
[78]DRAM CLK = 528 MHz
[80]DRAM Type = 2 (2:DDR2,3:DDR3)
[83]DRAMC read ODT  off.
[86]DRAM ODT off.
[87]ddr_efuse_type: 0xa
[90]DRAM SIZE =64 M
[92]dram_tpr4:0x0
[94]PLL_DDR_CTRL_REG:0xf8002b00
[97]DRAM_CLK_REG:0xc0000000
[99][TIMING DEBUG] MR2= 0x0
[104]DRAM simple test OK.
[106]dram size =64
[108]card no is 0
[109]sdcard 0 line count 4
[112][mmc]: mmc driver ver 2021-04-2 16:45
[121][mmc]: Wrong media type 0x0
[124][mmc]: ***Try SD card 0***
[133][mmc]: HSSDR52/SDR25 4 bit
[136][mmc]: 50000000 Hz
[138][mmc]: 3763 MB
[140][mmc]: ***SD/MMC 0 init OK!!!***
[179]Loading boot-pkg Succeed(index=0).
[182]Entry_name        = opensbi
[186]Entry_name        = u-boot
[189]Entry_name        = dtb
[192]mmc not para
▒193]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 08 2023 - 22:56:48 +0800) Allwinner Technology

[00.203]DRAM:  64 MiB
[00.206]Relocation Offset is: 01f27000
[00.210]secure enable bit: 0
[00.213]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.219]flash init start
[00.221]workmode = 0,storage type = 1
[00.225][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.230][mmc]: get sdc_type fail and use default host:tm1.
[00.237][mmc]: can't find node "mmc0",will add new node
[00.242][mmc]: fdt err returned <no error>
[00.246][mmc]: Using default timing para
[00.249][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.267][mmc]: card_caps:0x3000000a
[00.270][mmc]: host_caps:0x3000003f
[00.274]sunxi flash init ok
[00.276]line:703 init_clocks
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.304]Loading Environment from SUNXI_FLASH... GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
Can't find env partition
*** Warning - no device, using default environment

Failed (-19)
[00.340]out of usb burn from boot: not need burn key
cann't get the boot_base from the env
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.364]Item0 (Map) magic is bad
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
partno erro : can't find partition private
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.417]update part info
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.443]update bootcmd
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.492]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.527]update dts
noncached_alloc(): addr = 0x42b4ba00
noncached_alloc(): addr = 0x42b4ba40
noncached_alloc(): addr = 0x42b4ba80
noncached_alloc(): addr = 0x42b4c2c0
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.547]Board Net Initialization Failed
[00.551]No ethernet found.
Hit any key to stop autoboot:  0
## Error: "distro_bootcmd" not defined
=>
=>
=>

          有一张正常:

          [35]HELLO! BOOT0 is starting!
[38]BOOT0 commit : 88480af-dirty
[41]set pll start
[43]periph0 has been enabled
[46]set pll end
[48][pmu]: bus read error
[50]board init ok
[52]ZQ value = 0x30
[54]get_pmu_exist() = -1
[56]ddr_efuse_type: 0xa
[58]trefi:7.8ms
[60][AUTO DEBUG] single rank and full DQ!
[64]ddr_efuse_type: 0xa
[66]trefi:7.8ms
[68][AUTO DEBUG] rank 0 row = 13
[71][AUTO DEBUG] rank 0 bank = 4
[75][AUTO DEBUG] rank 0 page size = 2 KB
[78]DRAM BOOT DRIVE INFO: V0.33
[81]DRAM CLK = 528 MHz
[83]DRAM Type = 2 (2:DDR2,3:DDR3)
[87]DRAMC read ODT  off.
[89]DRAM ODT off.
[91]ddr_efuse_type: 0xa
[93]DRAM SIZE =64 M
[95]dram_tpr4:0x0
[97]PLL_DDR_CTRL_REG:0xf8002b00
[100]DRAM_CLK_REG:0xc0000000
[102][TIMING DEBUG] MR2= 0x0
[107]DRAM simple test OK.
[109]dram size =64
[111]card no is 0
[113]sdcard 0 line count 4
[115][mmc]: mmc driver ver 2021-04-2 16:45
[125][mmc]: Wrong media type 0x0
[127][mmc]: ***Try SD card 0***
[140][mmc]: HSSDR52/SDR25 4 bit
[143][mmc]: 50000000 Hz
[145][mmc]: 3780 MB
[147][mmc]: ***SD/MMC 0 init OK!!!***
[191]Loading boot-pkg Succeed(index=0).
[195]Entry_name        = opensbi
[198]Entry_name        = u-boot
[202]Entry_name        = dtb
[204]mmc not para
▒206]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 09 2023 - 21:12:54 +0800) Allwinner Technology

[00.216]DRAM:  64 MiB
[00.218]Relocation Offset is: 01f27000
[00.222]secure enable bit: 0
[00.226]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.232]flash init start
[00.234]workmode = 0,storage type = 1
[00.237][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.243][mmc]: get sdc_type fail and use default host:tm1.
[00.250][mmc]: can't find node "mmc0",will add new node
[00.254][mmc]: fdt err returned <no error>
[00.258][mmc]: Using default timing para
[00.262][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.282][mmc]: card_caps:0x3000000a
[00.285][mmc]: host_caps:0x3000003f
[00.290]sunxi flash init ok
[00.292]line:703 init_clocks
[00.318]Loading Environment from SUNXI_FLASH... OK
[00.343]out of usb burn from boot: not need burn key
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.363]Item0 (Map) magic is bad
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.380]update part info
[00.385]update bootcmd
[00.390]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.425]update dts
noncached_alloc(): addr = 0x42b4afc0
noncached_alloc(): addr = 0x42b4b000
noncached_alloc(): addr = 0x42b4b040
noncached_alloc(): addr = 0x42b4b880
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.445]Board Net Initialization Failed
[00.448]No ethernet found.
Hit any key to stop autoboot:  0
[00.656]no vendor_boot partition is found
Android's image name: d1s-whycanpih
Detect comp gzip
[00.935]
Starting kernel ...

[00.938][mmc]: MMC Device 2 not found
[00.941][mmc]: mmc 2 not find, so not exit
▒** 17 printk messages dropped **
[    0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 56316K/65536K available (4943K kernel code, 428K rwdata, 1914K rodata, 156K init, 237K bss, 9220K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000032] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[    0.000437] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.001236] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001261] pid_max: default: 32768 minimum: 301
[    0.001480] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.001504] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.003805] ASID allocator initialised with 65536 entries
[    0.004015] rcu: Hierarchical SRCU implementation.
[    0.004826] devtmpfs: initialized
[    0.025392] random: get_random_u32 called from bucket_table_alloc.isra.27+0x10a/0x12c with crng_init=0
[    0.026850] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026891] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.027080] pinctrl core: initialized pinctrl subsystem
[    0.028945] NET: Registered protocol family 16
[    0.030003] DMA: preallocated 256 KiB pool for atomic allocations
[    0.035896] cpuidle: using governor menu
[    0.145503] rtc_ccu: sunxi ccu init OK
[    0.156066] clock: sunxi ccu init OK
[    0.157489] clock: sunxi ccu init OK
[    0.290983] iommu: Default domain type: Translated
[    0.291915] sunxi iommu: irq = 4
[    0.295166] SCSI subsystem initialized
[    0.296614] usbcore: registered new interface driver usbfs
[    0.296940] usbcore: registered new interface driver hub
[    0.297252] usbcore: registered new device driver usb
[    0.298245] mc: Linux media interface: v0.10
[    0.298684] videodev: Linux video capture interface: v2.00
[    0.304674] Advanced Linux Sound Architecture Driver Initialized.
[    0.306109] Bluetooth: Core ver 2.22
[    0.306386] NET: Registered protocol family 31
[    0.306402] Bluetooth: HCI device and connection manager initialized
[    0.306429] Bluetooth: HCI socket layer initialized
[    0.306444] Bluetooth: L2CAP socket layer initialized
[    0.306498] Bluetooth: SCO socket layer initialized
[    0.307200] pwm module init!
[    0.310031] g2d 5410000.g2d: Adding to iommu group 0
[    0.310996] G2D: rcq version initialized.major:251
[    0.312811] clocksource: Switched to clocksource riscv_clocksource
[    0.334719] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.343333] NET: Registered protocol family 2
[    0.344718] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.344777] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344806] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344824] TCP: Hash tables configured (established 512 bind 512)
[    0.345003] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345058] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345364] NET: Registered protocol family 1
[    0.347805] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.348690] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.349244] sunxi_spi_resource_get()2151 - [spi0] SPI MASTER MODE
[    0.349325] sunxi_spi_resource_get()2189 - Failed to get sample mode
[    0.349337] sunxi_spi_resource_get()2194 - Failed to get sample delay
[    0.349349] sunxi_spi_resource_get()2198 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.349431] sunxi_spi_clk_init()2240 - [spi0] mclk 100000000
[    0.351018] sunxi_spi_probe()2653 - [spi0]: driver probe succeed, base ffffffd004058000, irq 31
[    0.356804] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[    0.392652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.394012] ntfs: driver 2.1.32 [Flags: R/W].
[    0.425659] io scheduler mq-deadline registered
[    0.425677] io scheduler kyber registered
[    0.427921] [DISP]disp_module_init
[    0.428947] disp 5000000.disp: Adding to iommu group 0
[    0.479607] display_fb_request,fb_id:0
[    0.483653] [DISP] Fb_copy_boot_fb,line:1443:
[    0.483658] no boot_fb0
[    0.484431] disp_al_manager_apply ouput_type:0
[    0.484914] [DISP] lcd_clk_config,line:744:
[    0.484931] disp 0, clk: pll(224000000),clk(224000000),dclk(8000000) dsi_rate(224000000)
[    0.484931]      clk real:pll(288000000),clk(288000000),dclk(10285714) dsi_rate(0)
[    0.484990] LCD_open_flow line136: 1111111111111111111111111111111111
[    0.485004] LCD_power_on line158: 1111111111111111111111111111111111
[    0.486182] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[    0.487407] [DISP]disp_module_init finish
[    0.489365] sunxi_sid_init()551 - insmod ok
[    0.490695] pwm-regulator: supplied by regulator-dummy
[    0.494140] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.494754] uart uart1: get regulator failed
[    0.494792] uart uart1: uart1 supply uart not found, using dummy regulator
[    0.496189] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[    0.497418] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    0.497965] uart uart3: get regulator failed
[    0.498002] uart uart3: uart3 supply uart not found, using dummy regulator
[    0.498689] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI
[    0.498722] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    0.613592] LCD_panel_init line200: 1111111111111111111111111111111111
[    0.613599] [ST7789V LCD INFO] LINE:0201-->LCD_panel_init:
[    0.613604] [ST7789V LCD INFO] LINE:0202-->LCD_panel_init:init statr!
[    0.613606] ili9327 statr
[    0.613612] lcd_panel_ili9327_init line218: 1111111111111111111111111111111111
[    0.613617] lcd_panel_ili9327_init line219: 1111111111111111111111111111111111
[    0.613622] lcd_panel_ili9327_init line220: 1111111111111111111111111111111111
[    0.613627] [ST7789V LCD INFO] LINE:0222-->lcd_panel_ili9327_init:
[    0.633378] [ST7789V LCD INFO] LINE:0226-->lcd_panel_ili9327_init:reset do!
[    0.633383] ili9327 reset!
[    1.061128] ili9327 init over!
[    1.223203] LCD_bl_open line182: 1111111111111111111111111111111111
[    1.223210] [ST7789V LCD INFO] LINE:0183-->LCD_bl_open:bl open!
[    1.223212] ili9327 open
[    1.223533] [DISP] disp_device_attached_and_enable,line:233:
[    1.223540] attached ok, mgr0<-->dev0
[    1.223544] [DISP] disp_device_attached_and_enable,line:236:
[    1.223557] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8
[    1.287862] printk: console [ttyS3] enabled
[    1.295053] misc dump reg init
[    1.300955] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    1.308725] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    1.316253] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    1.323863] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    1.330380] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    1.337529] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    1.345388] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    1.353439] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    1.361550] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    1.369606] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    1.376626] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    1.384329] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=141 assert=0
[    1.391969] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    1.404966] [ADDR_MGT] addr_mgt_probe: module version: v1.0.10
[    1.413930] [ADDR_MGT] addr_mgt_probe: success.
[    1.421428] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[    1.429684] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    1.437867] sunxi-spinand-phy: not detect any munufacture from id table
[    1.445517] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.452176] sunxi-spinand-phy: get phy info from fdt fail
[    1.458432] sunxi-spinand-phy: not detect munufacture from fdt
[    1.465359] sunxi-spinand-phy: detect munufacture from id table: GD
[    1.472396] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.479114] sunxi-spinand-phy: get phy info from fdt fail
[    1.485264] sunxi-spinand-phy: not detect munufacture from fdt
[    1.491820] sunxi-spinand-phy: not match spinand: f1c8f1c8 f1c8f1c8
[    1.500032] libphy: Fixed MDIO Bus: probed
[    1.505646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.513263] sunxi-ehci: EHCI SUNXI driver
[    1.518445] get ehci0-controller wakeup-source is fail.
[    1.524641] sunxi ehci0-controller don't init wakeup source
[    1.530928] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe00076f910, 0x:ffffffd00406f000, irq_no:2e
[    1.544618] [sunxi-ehci0]: Not init ehci0
[    1.549821] get ehci1-controller wakeup-source is fail.
[    1.556114] sunxi ehci1-controller don't init wakeup source
[    1.562405] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0007700a0, 0x:ffffffd004073000, irq_no:31
[    1.576146] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    1.589134] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    1.601819] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    1.609204] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.619306] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[    1.652885] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    1.662384] hub 1-0:1.0: USB hub found
[    1.667096] hub 1-0:1.0: 1 port detected
[    1.673442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.680456] sunxi-ohci: OHCI SUNXI driver
[    1.686319] get ohci0-controller wakeup-source is fail.
[    1.692289] sunxi ohci0-controller don't init wakeup source
[    1.698759] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe00076fcd8
[    1.709320] [sunxi-ohci0]: Not init ohci0
[    1.714640] get ohci1-controller wakeup-source is fail.
[    1.720690] sunxi ohci1-controller don't init wakeup source
[    1.727269] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000770468
[    1.737889] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[    1.750901] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    1.763569] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    1.770883] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.781408] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[    1.858499] hub 2-0:1.0: USB hub found
[    1.863208] hub 2-0:1.0: 1 port detected
[    1.869955] sunxi_gpadc_init,2151, success
[    1.875866] sunxi_gpadc_setup: get channel scan data failed
[    1.883334] input: sunxi-gpadc0 as /devices/virtual/input/input0
[    1.895405] sunxi-rtc 7090000.rtc: registered as rtc0
[    1.901265] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T04:02:42 UTC (14562)
[    1.911365] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.917931] i2c /dev entries driver
[    1.922493] IR NEC protocol handler initialized
[    1.928116] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    1.940457] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    1.948690] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    1.960835] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    1.969608] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    1.981799] usbcore: registered new interface driver uvcvideo
[    1.988838] USB Video Class driver (1.1.1)
[    1.993597] sunxi cedar version 1.1
[    1.997842] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    2.004346] VE: install start!!!
[    2.004346]
[    2.010362] VE: cedar-ve the get irq is 6
[    2.010362]
[    2.017218] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[    2.017218]
[    2.028944] VE: install end!!!
[    2.028944]
[    2.034098] VE: sunxi_cedar_probe
[    2.038489] Bluetooth: HCI UART driver ver 2.3
[    2.043917] Bluetooth: HCI UART protocol H4 registered
[    2.049743] Bluetooth: HCI UART protocol BCSP registered
[    2.055791] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    2.063350] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[    2.069843] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[    2.076617] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[    2.076617]
[    2.085437] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[    2.096723] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.107138] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    2.113483] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    2.119860] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    2.126599] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    2.133128] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    2.139687] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    2.146352] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    2.152934] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    2.160077] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    2.165563] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    2.172475] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.183909] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.202921] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.227584] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.233340] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.246119] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.256697] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.263024] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.269466] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.276015] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.287717] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.294298] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.300821] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.307629] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.314306] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.320912] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.330097] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.342761] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.354387] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.363756] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.375412] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.399922] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.407711] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.415499] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.422420] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.434840] sunxi_led_probe()1751 - start
[    2.439740] sunxi_get_str_of_property()1597 - failed to get the string of propname led_regulator!
[    2.450066] sunxi_register_led_classdev()1485 - led_classdev start
[    2.458589] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.472453] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.481921] sunxi_led_probe()1847 - finish
[    2.488557] ledtrig-cpu: registered to indicate activity on CPUs
[    2.496828] ashmem: initialized
[    2.500495] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.512463] exFAT: Version 1.3.0
[    2.516119] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.523319] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.535036] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.542805] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.550505] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.557360] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.570218] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.588877] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.588877]
[    2.606464] mmc0: new high speed SDHC card at address 0001
[    2.614631] mmcblk0: mmc0:0001 3333 3.69 GiB
[    2.619846] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.634941] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    2.644853]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.651190] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[    2.663456] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.673623] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.683254] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.695942] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[    2.709314] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    2.722526] NET: Registered protocol family 10
[    2.727679] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    2.737647] Segment Routing with IPv6
[    2.742026] NET: Registered protocol family 17
[    2.747617] Bluetooth: RFCOMM TTY layer initialized
[    2.753476] Bluetooth: RFCOMM socket layer initialized
[    2.759287] Bluetooth: RFCOMM ver 1.11
[    2.797946] sunxi-i2c sunxi-i2c0: sunxi-i2c0 supply twi not found, using dummy regulator
[    2.817440] sunxi-i2c sunxi-i2c0: probe success
[    2.824419] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    2.836820] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    2.845188] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    2.857286] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    2.866115] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    2.879560] clk: Not disabling unused clocks
[    2.884886] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.895096] ALSA device list:
[    2.898411]   #0: audiocodec
[    2.901685] alloc_fd: slot 0 not NULL!
[    2.906068] cfg80211: failed to load regulatory.db
[    2.920827] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[    2.934454] devtmpfs: mounted
[    2.937996] Freeing unused kernel memory: 156K
[    2.943068] This architecture does not have kernel memory protection.
          1 Reply Last reply Reply Quote Share 0
          • W
            whycan晕哥 LV 9 last edited by

            @smiletiger
            我也出现一模一样的问题了,

            同样的D1s板子，同一个固件，淘宝上面买的渣ＴＦ卡，有一张卡不正常：

            [32]HELLO! BOOT0 is starting!
[35]BOOT0 commit : 88480af-dirty
[38]set pll start
[40]periph0 has been enabled
[43]set pll end
[44][pmu]: bus read error
[47]board init ok
[48]ZQ value = 0x30
[50]get_pmu_exist() = -1
[53]ddr_efuse_type: 0xa
[55]trefi:7.8ms
[57][AUTO DEBUG] single rank and full DQ!
[61]ddr_efuse_type: 0xa
[63]trefi:7.8ms
[65][AUTO DEBUG] rank 0 row = 13
[68][AUTO DEBUG] rank 0 bank = 4
[71][AUTO DEBUG] rank 0 page size = 2 KB
[75]DRAM BOOT DRIVE INFO: V0.33
[78]DRAM CLK = 528 MHz
[80]DRAM Type = 2 (2:DDR2,3:DDR3)
[83]DRAMC read ODT  off.
[86]DRAM ODT off.
[87]ddr_efuse_type: 0xa
[90]DRAM SIZE =64 M
[92]dram_tpr4:0x0
[94]PLL_DDR_CTRL_REG:0xf8002b00
[97]DRAM_CLK_REG:0xc0000000
[99][TIMING DEBUG] MR2= 0x0
[104]DRAM simple test OK.
[106]dram size =64
[108]card no is 0
[109]sdcard 0 line count 4
[112][mmc]: mmc driver ver 2021-04-2 16:45
[121][mmc]: Wrong media type 0x0
[124][mmc]: ***Try SD card 0***
[133][mmc]: HSSDR52/SDR25 4 bit
[136][mmc]: 50000000 Hz
[138][mmc]: 3763 MB
[140][mmc]: ***SD/MMC 0 init OK!!!***
[179]Loading boot-pkg Succeed(index=0).
[182]Entry_name        = opensbi
[186]Entry_name        = u-boot
[189]Entry_name        = dtb
[192]mmc not para
▒193]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 08 2023 - 22:56:48 +0800) Allwinner Technology

[00.203]DRAM:  64 MiB
[00.206]Relocation Offset is: 01f27000
[00.210]secure enable bit: 0
[00.213]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.219]flash init start
[00.221]workmode = 0,storage type = 1
[00.225][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.230][mmc]: get sdc_type fail and use default host:tm1.
[00.237][mmc]: can't find node "mmc0",will add new node
[00.242][mmc]: fdt err returned <no error>
[00.246][mmc]: Using default timing para
[00.249][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.267][mmc]: card_caps:0x3000000a
[00.270][mmc]: host_caps:0x3000003f
[00.274]sunxi flash init ok
[00.276]line:703 init_clocks
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.304]Loading Environment from SUNXI_FLASH... GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
Can't find env partition
*** Warning - no device, using default environment

Failed (-19)
[00.340]out of usb burn from boot: not need burn key
cann't get the boot_base from the env
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.364]Item0 (Map) magic is bad
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
partno erro : can't find partition private
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.417]update part info
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.443]update bootcmd
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
[00.492]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.527]update dts
noncached_alloc(): addr = 0x42b4ba00
noncached_alloc(): addr = 0x42b4ba40
noncached_alloc(): addr = 0x42b4ba80
noncached_alloc(): addr = 0x42b4c2c0
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.547]Board Net Initialization Failed
[00.551]No ethernet found.
Hit any key to stop autoboot:  0
## Error: "distro_bootcmd" not defined
=>
=>
=>

            有一张正常:

            [35]HELLO! BOOT0 is starting!
[38]BOOT0 commit : 88480af-dirty
[41]set pll start
[43]periph0 has been enabled
[46]set pll end
[48][pmu]: bus read error
[50]board init ok
[52]ZQ value = 0x30
[54]get_pmu_exist() = -1
[56]ddr_efuse_type: 0xa
[58]trefi:7.8ms
[60][AUTO DEBUG] single rank and full DQ!
[64]ddr_efuse_type: 0xa
[66]trefi:7.8ms
[68][AUTO DEBUG] rank 0 row = 13
[71][AUTO DEBUG] rank 0 bank = 4
[75][AUTO DEBUG] rank 0 page size = 2 KB
[78]DRAM BOOT DRIVE INFO: V0.33
[81]DRAM CLK = 528 MHz
[83]DRAM Type = 2 (2:DDR2,3:DDR3)
[87]DRAMC read ODT  off.
[89]DRAM ODT off.
[91]ddr_efuse_type: 0xa
[93]DRAM SIZE =64 M
[95]dram_tpr4:0x0
[97]PLL_DDR_CTRL_REG:0xf8002b00
[100]DRAM_CLK_REG:0xc0000000
[102][TIMING DEBUG] MR2= 0x0
[107]DRAM simple test OK.
[109]dram size =64
[111]card no is 0
[113]sdcard 0 line count 4
[115][mmc]: mmc driver ver 2021-04-2 16:45
[125][mmc]: Wrong media type 0x0
[127][mmc]: ***Try SD card 0***
[140][mmc]: HSSDR52/SDR25 4 bit
[143][mmc]: 50000000 Hz
[145][mmc]: 3780 MB
[147][mmc]: ***SD/MMC 0 init OK!!!***
[191]Loading boot-pkg Succeed(index=0).
[195]Entry_name        = opensbi
[198]Entry_name        = u-boot
[202]Entry_name        = dtb
[204]mmc not para
▒206]Jump to second Boot.

U-Boot 2018.05-g24521d6-dirty (Feb 09 2023 - 21:12:54 +0800) Allwinner Technology

[00.216]DRAM:  64 MiB
[00.218]Relocation Offset is: 01f27000
[00.222]secure enable bit: 0
[00.226]CPU=720 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.232]flash init start
[00.234]workmode = 0,storage type = 1
[00.237][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[00.243][mmc]: get sdc_type fail and use default host:tm1.
[00.250][mmc]: can't find node "mmc0",will add new node
[00.254][mmc]: fdt err returned <no error>
[00.258][mmc]: Using default timing para
[00.262][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.282][mmc]: card_caps:0x3000000a
[00.285][mmc]: host_caps:0x3000003f
[00.290]sunxi flash init ok
[00.292]line:703 init_clocks
[00.318]Loading Environment from SUNXI_FLASH... OK
[00.343]out of usb burn from boot: not need burn key
[00.348]Item0 (Map) magic is bad
[00.351]the secure storage item0 copy0 magic is bad
[00.356]Item0 (Map) magic is bad
[00.359]the secure storage item0 copy1 magic is bad
[00.363]Item0 (Map) magic is bad
partno erro : can't find partition private
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.380]update part info
[00.385]update bootcmd
[00.390]change working_fdt 0x42ae6da0 to 0x42ac6da0
disable nand error: FDT_ERR_BADPATH
No reserved memory region found in source FDT
[00.425]update dts
noncached_alloc(): addr = 0x42b4afc0
noncached_alloc(): addr = 0x42b4b000
noncached_alloc(): addr = 0x42b4b040
noncached_alloc(): addr = 0x42b4b880
geth_sys_init:634: get node 'gmac0' error
geth_sys_init fail!
[00.445]Board Net Initialization Failed
[00.448]No ethernet found.
Hit any key to stop autoboot:  0
[00.656]no vendor_boot partition is found
Android's image name: d1s-whycanpih
Detect comp gzip
[00.935]
Starting kernel ...

[00.938][mmc]: MMC Device 2 not found
[00.941][mmc]: mmc 2 not find, so not exit
▒** 17 printk messages dropped **
[    0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 56316K/65536K available (4943K kernel code, 428K rwdata, 1914K rodata, 156K init, 237K bss, 9220K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000032] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[    0.000437] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.001236] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.001261] pid_max: default: 32768 minimum: 301
[    0.001480] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.001504] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.003805] ASID allocator initialised with 65536 entries
[    0.004015] rcu: Hierarchical SRCU implementation.
[    0.004826] devtmpfs: initialized
[    0.025392] random: get_random_u32 called from bucket_table_alloc.isra.27+0x10a/0x12c with crng_init=0
[    0.026850] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.026891] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.027080] pinctrl core: initialized pinctrl subsystem
[    0.028945] NET: Registered protocol family 16
[    0.030003] DMA: preallocated 256 KiB pool for atomic allocations
[    0.035896] cpuidle: using governor menu
[    0.145503] rtc_ccu: sunxi ccu init OK
[    0.156066] clock: sunxi ccu init OK
[    0.157489] clock: sunxi ccu init OK
[    0.290983] iommu: Default domain type: Translated
[    0.291915] sunxi iommu: irq = 4
[    0.295166] SCSI subsystem initialized
[    0.296614] usbcore: registered new interface driver usbfs
[    0.296940] usbcore: registered new interface driver hub
[    0.297252] usbcore: registered new device driver usb
[    0.298245] mc: Linux media interface: v0.10
[    0.298684] videodev: Linux video capture interface: v2.00
[    0.304674] Advanced Linux Sound Architecture Driver Initialized.
[    0.306109] Bluetooth: Core ver 2.22
[    0.306386] NET: Registered protocol family 31
[    0.306402] Bluetooth: HCI device and connection manager initialized
[    0.306429] Bluetooth: HCI socket layer initialized
[    0.306444] Bluetooth: L2CAP socket layer initialized
[    0.306498] Bluetooth: SCO socket layer initialized
[    0.307200] pwm module init!
[    0.310031] g2d 5410000.g2d: Adding to iommu group 0
[    0.310996] G2D: rcq version initialized.major:251
[    0.312811] clocksource: Switched to clocksource riscv_clocksource
[    0.334719] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.343333] NET: Registered protocol family 2
[    0.344718] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.344777] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344806] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.344824] TCP: Hash tables configured (established 512 bind 512)
[    0.345003] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345058] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.345364] NET: Registered protocol family 1
[    0.347805] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.348690] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.349244] sunxi_spi_resource_get()2151 - [spi0] SPI MASTER MODE
[    0.349325] sunxi_spi_resource_get()2189 - Failed to get sample mode
[    0.349337] sunxi_spi_resource_get()2194 - Failed to get sample delay
[    0.349349] sunxi_spi_resource_get()2198 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.349431] sunxi_spi_clk_init()2240 - [spi0] mclk 100000000
[    0.351018] sunxi_spi_probe()2653 - [spi0]: driver probe succeed, base ffffffd004058000, irq 31
[    0.356804] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[    0.392652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.394012] ntfs: driver 2.1.32 [Flags: R/W].
[    0.425659] io scheduler mq-deadline registered
[    0.425677] io scheduler kyber registered
[    0.427921] [DISP]disp_module_init
[    0.428947] disp 5000000.disp: Adding to iommu group 0
[    0.479607] display_fb_request,fb_id:0
[    0.483653] [DISP] Fb_copy_boot_fb,line:1443:
[    0.483658] no boot_fb0
[    0.484431] disp_al_manager_apply ouput_type:0
[    0.484914] [DISP] lcd_clk_config,line:744:
[    0.484931] disp 0, clk: pll(224000000),clk(224000000),dclk(8000000) dsi_rate(224000000)
[    0.484931]      clk real:pll(288000000),clk(288000000),dclk(10285714) dsi_rate(0)
[    0.484990] LCD_open_flow line136: 1111111111111111111111111111111111
[    0.485004] LCD_power_on line158: 1111111111111111111111111111111111
[    0.486182] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[    0.487407] [DISP]disp_module_init finish
[    0.489365] sunxi_sid_init()551 - insmod ok
[    0.490695] pwm-regulator: supplied by regulator-dummy
[    0.494140] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.494754] uart uart1: get regulator failed
[    0.494792] uart uart1: uart1 supply uart not found, using dummy regulator
[    0.496189] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[    0.497418] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    0.497965] uart uart3: get regulator failed
[    0.498002] uart uart3: uart3 supply uart not found, using dummy regulator
[    0.498689] uart3: ttyS3 at MMIO 0x2500c00 (irq = 21, base_baud = 1500000) is a SUNXI
[    0.498722] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    0.613592] LCD_panel_init line200: 1111111111111111111111111111111111
[    0.613599] [ST7789V LCD INFO] LINE:0201-->LCD_panel_init:
[    0.613604] [ST7789V LCD INFO] LINE:0202-->LCD_panel_init:init statr!
[    0.613606] ili9327 statr
[    0.613612] lcd_panel_ili9327_init line218: 1111111111111111111111111111111111
[    0.613617] lcd_panel_ili9327_init line219: 1111111111111111111111111111111111
[    0.613622] lcd_panel_ili9327_init line220: 1111111111111111111111111111111111
[    0.613627] [ST7789V LCD INFO] LINE:0222-->lcd_panel_ili9327_init:
[    0.633378] [ST7789V LCD INFO] LINE:0226-->lcd_panel_ili9327_init:reset do!
[    0.633383] ili9327 reset!
[    1.061128] ili9327 init over!
[    1.223203] LCD_bl_open line182: 1111111111111111111111111111111111
[    1.223210] [ST7789V LCD INFO] LINE:0183-->LCD_bl_open:bl open!
[    1.223212] ili9327 open
[    1.223533] [DISP] disp_device_attached_and_enable,line:233:
[    1.223540] attached ok, mgr0<-->dev0
[    1.223544] [DISP] disp_device_attached_and_enable,line:236:
[    1.223557] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8
[    1.287862] printk: console [ttyS3] enabled
[    1.295053] misc dump reg init
[    1.300955] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    1.308725] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    1.316253] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    1.323863] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    1.330380] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    1.337529] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    1.345388] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    1.353439] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    1.361550] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    1.369606] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    1.376626] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    1.384329] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=141 assert=0
[    1.391969] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    1.404966] [ADDR_MGT] addr_mgt_probe: module version: v1.0.10
[    1.413930] [ADDR_MGT] addr_mgt_probe: success.
[    1.421428] sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[    1.429684] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    1.437867] sunxi-spinand-phy: not detect any munufacture from id table
[    1.445517] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.452176] sunxi-spinand-phy: get phy info from fdt fail
[    1.458432] sunxi-spinand-phy: not detect munufacture from fdt
[    1.465359] sunxi-spinand-phy: detect munufacture from id table: GD
[    1.472396] sunxi-spinand-phy: get spi-nand Model from fdt fail
[    1.479114] sunxi-spinand-phy: get phy info from fdt fail
[    1.485264] sunxi-spinand-phy: not detect munufacture from fdt
[    1.491820] sunxi-spinand-phy: not match spinand: f1c8f1c8 f1c8f1c8
[    1.500032] libphy: Fixed MDIO Bus: probed
[    1.505646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.513263] sunxi-ehci: EHCI SUNXI driver
[    1.518445] get ehci0-controller wakeup-source is fail.
[    1.524641] sunxi ehci0-controller don't init wakeup source
[    1.530928] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe00076f910, 0x:ffffffd00406f000, irq_no:2e
[    1.544618] [sunxi-ehci0]: Not init ehci0
[    1.549821] get ehci1-controller wakeup-source is fail.
[    1.556114] sunxi ehci1-controller don't init wakeup source
[    1.562405] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0007700a0, 0x:ffffffd004073000, irq_no:31
[    1.576146] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    1.589134] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    1.601819] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    1.609204] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    1.619306] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[    1.652885] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    1.662384] hub 1-0:1.0: USB hub found
[    1.667096] hub 1-0:1.0: 1 port detected
[    1.673442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.680456] sunxi-ohci: OHCI SUNXI driver
[    1.686319] get ohci0-controller wakeup-source is fail.
[    1.692289] sunxi ohci0-controller don't init wakeup source
[    1.698759] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe00076fcd8
[    1.709320] [sunxi-ohci0]: Not init ohci0
[    1.714640] get ohci1-controller wakeup-source is fail.
[    1.720690] sunxi ohci1-controller don't init wakeup source
[    1.727269] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000770468
[    1.737889] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[    1.750901] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    1.763569] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    1.770883] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    1.781408] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[    1.858499] hub 2-0:1.0: USB hub found
[    1.863208] hub 2-0:1.0: 1 port detected
[    1.869955] sunxi_gpadc_init,2151, success
[    1.875866] sunxi_gpadc_setup: get channel scan data failed
[    1.883334] input: sunxi-gpadc0 as /devices/virtual/input/input0
[    1.895405] sunxi-rtc 7090000.rtc: registered as rtc0
[    1.901265] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T04:02:42 UTC (14562)
[    1.911365] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.917931] i2c /dev entries driver
[    1.922493] IR NEC protocol handler initialized
[    1.928116] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    1.940457] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    1.948690] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    1.960835] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    1.969608] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    1.981799] usbcore: registered new interface driver uvcvideo
[    1.988838] USB Video Class driver (1.1.1)
[    1.993597] sunxi cedar version 1.1
[    1.997842] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    2.004346] VE: install start!!!
[    2.004346]
[    2.010362] VE: cedar-ve the get irq is 6
[    2.010362]
[    2.017218] VE: ve_debug_proc_info:(____ptrval____), data:(____ptrval____), lock:(____ptrval____)
[    2.017218]
[    2.028944] VE: install end!!!
[    2.028944]
[    2.034098] VE: sunxi_cedar_probe
[    2.038489] Bluetooth: HCI UART driver ver 2.3
[    2.043917] Bluetooth: HCI UART protocol H4 registered
[    2.049743] Bluetooth: HCI UART protocol BCSP registered
[    2.055791] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    2.063350] [XR_BT_LPM] bluesleep_probe: bt_wake polarity: 1
[    2.069843] [XR_BT_LPM] bluesleep_probe: host_wake polarity: 1
[    2.076617] [XR_BT_LPM] bluesleep_probe: wakeup source is disabled!
[    2.076617]
[    2.085437] [XR_BT_LPM] bluesleep_probe: uart_index(1)
[    2.096723] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.107138] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    2.113483] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    2.119860] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    2.126599] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    2.133128] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    2.139687] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    2.146352] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    2.152934] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    2.160077] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    2.165563] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    2.172475] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.183909] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.202921] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.227584] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.233340] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.246119] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-11-18 10:02)
[    2.256697] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.263024] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.269466] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.276015] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.287717] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.294298] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.300821] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.307629] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.314306] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.320912] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.330097] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.342761] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.354387] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.363756] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.375412] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.399922] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.407711] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.415499] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.422420] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.434840] sunxi_led_probe()1751 - start
[    2.439740] sunxi_get_str_of_property()1597 - failed to get the string of propname led_regulator!
[    2.450066] sunxi_register_led_classdev()1485 - led_classdev start
[    2.458589] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.472453] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.481921] sunxi_led_probe()1847 - finish
[    2.488557] ledtrig-cpu: registered to indicate activity on CPUs
[    2.496828] ashmem: initialized
[    2.500495] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.512463] exFAT: Version 1.3.0
[    2.516119] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.523319] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.535036] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.542805] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.550505] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.557360] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.570218] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.588877] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.588877]
[    2.606464] mmc0: new high speed SDHC card at address 0001
[    2.614631] mmcblk0: mmc0:0001 3333 3.69 GiB
[    2.619846] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.634941] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    2.644853]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.651190] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[    2.663456] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.673623] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.683254] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.695942] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[    2.709314] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    2.722526] NET: Registered protocol family 10
[    2.727679] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    2.737647] Segment Routing with IPv6
[    2.742026] NET: Registered protocol family 17
[    2.747617] Bluetooth: RFCOMM TTY layer initialized
[    2.753476] Bluetooth: RFCOMM socket layer initialized
[    2.759287] Bluetooth: RFCOMM ver 1.11
[    2.797946] sunxi-i2c sunxi-i2c0: sunxi-i2c0 supply twi not found, using dummy regulator
[    2.817440] sunxi-i2c sunxi-i2c0: probe success
[    2.824419] sun8iw20-pinctrl 2000000.pinctrl: pin PB7 already requested by 2500c00.uart; cannot claim for 7040000.s_cir
[    2.836820] sun8iw20-pinctrl 2000000.pinctrl: pin-39 (7040000.s_cir) status -22
[    2.845188] sun8iw20-pinctrl 2000000.pinctrl: could not request pin 39 (PB7) from group PB7  on device 2000000.pinctrl
[    2.857286] sunxi-rc-recv 7040000.s_cir: Error applying setting, reverse things back
[    2.866115] sunxi-rc-recv: probe of 7040000.s_cir failed with error -22
[    2.879560] clk: Not disabling unused clocks
[    2.884886] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.895096] ALSA device list:
[    2.898411]   #0: audiocodec
[    2.901685] alloc_fd: slot 0 not NULL!
[    2.906068] cfg80211: failed to load regulatory.db
[    2.920827] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[    2.934454] devtmpfs: mounted
[    2.937996] Freeing unused kernel memory: 156K
[    2.943068] This architecture does not have kernel memory protection.
            W 1 Reply Last reply Reply Quote Share 0
            • W
              whycan晕哥 LV 9 @whycan last edited by

              @whycan 在 试着用t113的uboot测试mipi屏幕,出现问题,能不能帮帮我 中说：

              同样的D1s板子，同一个固件，淘宝上面买的渣ＴＦ卡，有一张卡不正常：

              所以，楼主换张卡应该就ＯＫ了．

              1 Reply Last reply Reply Quote Share 0
              • 1 / 1
              • First post
                Last post

              Copyright © 2022 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号

              行为准则 | 用户协议 | 隐私权政策