T113 超频测试
-
把CPU频率超频到了1.752GHz ddr超频到1.164G,老化测试了几个小时很稳定,没任何报错,芯片表面温度为49℃,室温为26℃
\ | / - RT - Thread Operating System / | \ 4.1.0 build Sep 20 2022 10:33:12 2006 - 2022 Copyright by RT-Thread team hello rt-thread 10:23:02 msh >CPU_clk=1752MHz CPU_clk=1752MHz DDR_clk=1164MHz msh >core_mark Benchmark started, please make sure it runs for at least 10s. 2K performance run parameters for coremark. CoreMark Size : 666 Total ticks : 9352 Total time (secs): 9.352000 Iterations/Sec : 5346.449957 ERROR! Must execute for at least 10 secs for a valid result! Iterations : 50000 Compiler version : GCC6.3.1 20170215 (release) [ARM/embedded-6-branch revision 245512] Compiler flags : Memory location : STACK seedcrc : 0xe9f5 [0]crclist : 0xe714 [0]crcmatrix : 0x1fd7 [0]crcstate : 0x8e3a [0]crcfinal : 0xa14c Errors detected msh >memory_perf 0x46000000 0x100000 MemoryPerf version 1.0.0 Copyright (c) 2022 SummerGift (summergift2019@gmail.com) Licensed under the MIT License version. Memory performance testing start... address: 0x46000000, length: 0x100000, iterations: 200 Data length : 209 MB. -------------------------------------- 8-bit write speed test begin. Spend time : 0.165000 s. 8-bit write speed: 1271.001221 M/s. 8-bit read speed test begin. Spend time : 0.406000 s. 8-bit Read speed: 516.539917 M/s. -------------------------------------- 16-bit write speed test begin. Spend time : 0.083000 s. 16-bit write speed: 2526.689209 M/s. 16-bit read speed test begin. Spend time : 0.234000 s. 16-bit Read speed: 896.218811 M/s. -------------------------------------- 32-bit write speed test begin. Spend time : 0.054000 s. 32-bit Write speed: 3883.614746 M/s. 32-bit read speed test begin. Spend time : 0.133000 s. 32-bit Read speed: 1576.806030 M/s. Memory performance completed.
最高测试了稳定的频率为 1.8G和1.2G,表面温度为62℃
\ | / - RT - Thread Operating System / | \ 4.1.0 build Sep 20 2022 10:33:12 2006 - 2022 Copyright by RT-Thread team hello rt-thread 10:33:28 msh >CPU_clk=1800MHz CPU_clk=1800MHz DDR_clk=1200MHz msh >core_mark Benchmark started, please make sure it runs for at least 10s. 2K performance run parameters for coremark. CoreMark Size : 666 Total ticks : 9147 Total time (secs): 9.147000 Iterations/Sec : 5466.273095 ERROR! Must execute for at least 10 secs for a valid result! Iterations : 50000 Compiler version : GCC6.3.1 20170215 (release) [ARM/embedded-6-branch revision 245512] Compiler flags : Memory location : STACK seedcrc : 0xe9f5 [0]crclist : 0xe714 [0]crcmatrix : 0x1fd7 [0]crcstate : 0x8e3a [0]crcfinal : 0xa14c Errors detected msh >memory_perf 0x46000000 0x100000 MemoryPerf version 1.0.0 Copyright (c) 2022 SummerGift (summergift2019@gmail.com) Licensed under the MIT License version. Memory performance testing start... address: 0x46000000, length: 0x100000, iterations: 200 Data length : 209 MB. -------------------------------------- 8-bit write speed test begin. Spend time : 0.164000 s. 8-bit write speed: 1278.751221 M/s. 8-bit read speed test begin. Spend time : 0.399000 s. 8-bit Read speed: 525.601990 M/s. -------------------------------------- 16-bit write speed test begin. Spend time : 0.083000 s. 16-bit write speed: 2526.689209 M/s. 16-bit read speed test begin. Spend time : 0.229000 s. 16-bit Read speed: 915.786865 M/s. -------------------------------------- 32-bit write speed test begin. Spend time : 0.051000 s. 32-bit Write speed: 4112.062500 M/s. 32-bit read speed test begin. Spend time : 0.147000 s. 32-bit Read speed: 1426.634033 M/s. Memory performance completed. msh >
-
居然被你发现了。。。
-
楼主,T113 RTT SMP跑起来了吗,方便共享下资料不
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号