导航

    全志在线开发者论坛

    • 注册
    • 登录
    • 搜索
    • 版块
    • 话题
    • 在线文档
    • 社区主页

    uboot阶段注释掉CONFIG_DISP2_SUNXI后,启动log会卡住。

    MR Series
    1
    1
    1080
    正在加载更多帖子
    • 从旧到新
    • 从新到旧
    • 最多赞同
    回复
    • 在新帖中回复
    登录后回复
    此主题已被删除。只有拥有主题管理权限的用户可以查看。
    • mangogeek
      mangogeek LV 8 最后由 编辑

      环境:1.0.1 tina-d1-open

      在运行OK的代码基础上,只将uboot下configs里的 sun20iw1p1_defconfig 中 CONFIG_DISP2_SUNXI 注释掉,方法参考自:( D1_Tina_linux_LCD_调试指南.pdf p70)。
      启动log会卡到如下位置:

      [    2.520958] sunxi-spinand-phy: ========== logical info ==========
      [    2.527747] sunxi-spinand-phy: TotalSize:    256 M
      [    2.550957] sunxi-spinand-phy: SectorSize:   512 B
      [    2.556294] sunxi-spinand-phy: PageSize:     4 K
      [    2.570958] sunxi-spinand-phy: BlockSize:    256 K
      [    2.576294] sunxi-spinand-phy: OOBSize:      128 B
      [    2.590959] sunxi-spinand-phy: ========================================
      [    2.611031] sunxi-spinand-phy: block lock register: 0x00
      [    2.617123] sunxi-spinand-phy: feature register: 0x11
      [    2.630966] sunxi-spinand-phy: sunxi physic nand init end
      [    2.641473] Creating 4 MTD partitions on "sunxi_mtd_nand":
      [    2.647611] 0x000000000000-0x000000100000 : "boot0"
      

      后卡住不动。

      正常系统应该继续如下打印:

      [    1.472105] 0x000000100000-0x000000500000 : "uboot"
      [    1.477818] random: fast init done
      [    1.512083] 0x000000500000-0x000000600000 : "secure_storage"
      [    1.532115] 0x000000600000-0x000010000000 : "sys"
      [    1.936841] random: crng init done
      [    2.702598] libphy: Fixed MDIO Bus: probed
      
      1 条回复 最后回复 回复 引用 分享 0
      • 1 / 1
      • First post
        Last post

      Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号

      行为准则 | 用户协议 | 隐私权政策