全志D1-H启动不起来，请问下大佬要怎么解决，日志如下

[GONGWEIJIE]

[32]HELLO! BOOT0 is starting!
[35]BOOT0 commit : 27369ab-dirty
[38]set pll start
[39]periph0 has been enabled
[42]set pll end
[44][pmu]: bus read error
[46]board init ok
[48]DRAM only have internal ZQ!!
[51]get_pmu_exist() = -1
[53]ddr_efuse_type: 0x0
[56][AUTO DEBUG] single rank and full DQ!
[60]ddr_efuse_type: 0x0
[63][AUTO DEBUG] rank 0 row = 15
[66][AUTO DEBUG] rank 0 bank = 8
[70][AUTO DEBUG] rank 0 page size = 2 KB
[73]DRAM BOOT DRIVE INFO: V0.24
[76]DRAM CLK = 792 MHz
[78]DRAM Type = 3 (2:DDR2,3:DDR3)
[81]DRAMC ZQ value: 0x7b7bfb
[84]DRAM ODT value: 0x42.
[87]ddr_efuse_type: 0x0
[90]DRAM SIZE =512 M
[93]DRAM simple test OK.
[95]dram size =512
[97]card no is 0
[99]sdcard 0 line count 4
[101][mmc]: mmc driver ver 2021-04-2 16:45
[110][mmc]: Wrong media type 0x0
[113][mmc]: ***Try SD card 0***
[123][mmc]: HSSDR52/SDR25 4 bit
[126][mmc]: 50000000 Hz
[128][mmc]: 30200 MB
[130][mmc]: ***SD/MMC 0 init OK!!!***
[227]Loading boot-pkg Succeed(index=0).
[231]Entry_name        = opensbi
[234]Entry_name        = u-boot
[238]Entry_name        = dtb
[241]mmc not para
[242]Jump to second Boot.

OpenSBI v0.6
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name          : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs     : 1
Current Hart           : 0
Firmware Base          : 0x40000400
Firmware Size          : 75 KB
Runtime SBI Version    : 0.2

MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0    : 0x0000000040000000-0x000000004001ffff (A)
PMP1    : 0x0000000040000000-0x000000007fffffff (A,R,W,X)
PMP2    : 0x0000000080000000-0x00000000bfffffff (A,R,W,X)
PMP3    : 0x0000000000020000-0x0000000000027fff (A,▒