[<ffffffe0000293ce>] walk_stackframe+0x0/0xa0

[cfxcfx]

procd: Failed to open hotplug socket: Function not implemented
求教怎么解决，或应该怎么去解决

[cfxcfx]

[231]HELLO! BOOT0 is starting!
[234]BOOT0 commit : 27369ab
[237]set pll start
[239]periph0 has been enabled
[242]set pll end
[243][pmu]: bus read error
[246]board init ok
[248]ZQ value = 0x2f***********
[251]get_pmu_exist() = -1
[253]ddr_efuse_type: 0xa
[256][AUTO DEBUG] single rank and full DQ!
[260]ddr_efuse_type: 0xa
[263][AUTO DEBUG] rank 0 row = 13
[266][AUTO DEBUG] rank 0 bank = 4
[269][AUTO DEBUG] rank 0 page size = 2 KB
[273]DRAM BOOT DRIVE INFO: V0.24
[276]DRAM CLK = 528 MHz
[278]DRAM Type = 2 (2:DDR2,3:DDR3)
[282]DRAMC read ODT off.
[284]DRAM ODT off.
[286]ddr_efuse_type: 0xa
[289]DRAM SIZE =64 M
[292]DRAM simple test OK.
[295]dram size =64
[297]card no is 0
[298]sdcard 0 line count 4
[301][mmc]: mmc driver ver 2021-04-2 16:45
[310][mmc]: Wrong media type 0x0
[313][mmc]: Try SD card 0
[323][mmc]: HSSDR52/SDR25 4 bit
[326][mmc]: 50000000 Hz
[328][mmc]: 122 MB
[330][mmc]: SD/MMC 0 init OK!!!
[377]Loading boot-pkg Succeed(index=0).
[381]Entry_name = opensbi
[384]Entry_name = u-boot
[387]Entry_name = dtb
[390]mmc not para
[391]Jump to second Boot.

OpenSBI v0.6

---

/ __ \ / | _ _ |
| | | | __ ___ _ __ | ( | |) || |
| | | | '_ \ / _ \ '_ \ ___ | _ < | |
| || | |) | __/ | | |) | |) || |
_/| ./ _|| ||/|____/|
| |
|_|

Platform Name : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs : 1
Current Hart : 0
Firmware Base : 0x40000400
Firmware Size : 75 KB
Runtime SBI Version : 0.2

MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0 : 0x0000000040000000-0x000000004001ffff (A)
PMP1 : 0x0000000040000000-0x000000007fffffff (A,R,W,X)
PMP2 : 0x0000000000000000-0x0000000007ffffff (A,R,W)
PMP3 : 0x0000000009000000-0x000000000901ffff (

U-Boot 2018.05-g0a88ac9-dirty (Mar 09 2023 - 14:34:22 +0800) Allwinner Technology

[00.474]DRAM: 64 MiB
[00.476]Relocation Offset is: 01f30000
[00.481]secure enable bit: 0
[00.483]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz
[00.489]flash init start
[00.492]workmode = 0,storage type = 1
[00.495][mmc]: mmc driver ver uboot2018:2021-04-16 14:23:00-1
[00.501][mmc]: get sdc_type fail and use default host:tm1.
[00.507][mmc]: can't find node "mmc0",will add new node
[00.512][mmc]: fdt err returned <no error>
[00.516][mmc]: Using default timing para
[00.519][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.538][mmc]: card_caps:0x3000000a
[00.541][mmc]: host_caps:0x3000003f
[00.545]sunxi flash init ok
[00.547]line:714 init_clocks
__clk_init: clk pll_periph0x2 already initialized
register fix_factor clk error
[00.563]Loading Environment from SUNXI_FLASH... OK
[00.586]out of usb burn from boot: not need burn key
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.595]update part info
[00.598]update bootcmd
[00.601]change working_fdt 0x42aefda8 to 0x42acfda8
[00.620]update dts
Hit any key to stop autoboot: 0
Android's image name: d1-mangopi_mq_rg
No reserved memory region found in source FDT
[01.049]
Starting kernel ...

[01.052][mmc]: MMC Device 2 not found
[01.055][mmc]: mmc 2 not find, so not exit
[ 0.000000] OF: fdt: Ignoring memory range 0x40000000 - 0x40200000
[ 0.000000] Linux version 5.4.61 (root@c-VirtualBox) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #465 PREEMPT Wed May 17 10:49:22 UTC 2023
[ 0.000000] cma: Reserved 8 MiB at 0x0000000043800000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040200000-0x0000000043ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040200000-0x0000000043ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040200000-0x0000000043ffffff]
[ 0.000000] On node 0 totalpages: 15872
[ 0.000000] DMA32 zone: 217 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 15872 pages, LIFO batch:3
[ 0.000000] elf_hwcap is 0x20112d
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 15655
[ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:recovery@mmcblk0p7:UDISK@mmcblk0p8 cma=8M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g0a88ac9-dirty(03/09/2023-14:34:22) mbr_off
[ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 45780K/63488K available (4548K kernel code, 588K rwdata, 1714K rodata, 156K init, 211K bss, 9516K reserved, 8192K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[ 0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000025] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[ 0.000355] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000959] Console: colour dummy device 80x25
[ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001026] pid_max: default: 32768 minimum: 301
[ 0.001201] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.001219] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.003265] ASID allocator initialised with 65536 entries
[ 0.003468] rcu: Hierarchical SRCU implementation.
[ 0.004186] devtmpfs: initialized
[ 0.018530] random: get_random_u32 called from bucket_table_alloc.isra.31+0x4e/0x15e with crng_init=0
[ 0.019441] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.019475] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.019996] pinctrl core: initialized pinctrl subsystem
[ 0.023015] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.023796] cpuidle: using governor menu
[ 0.066502] rtc_ccu: sunxi ccu init OK
[ 0.074011] clock: sunxi ccu init OK
[ 0.075020] clock: sunxi ccu init OK
[ 0.115550] iommu: Default domain type: Translated
[ 0.115752] sunxi iommu: irq = 4
[ 0.116975] SCSI subsystem initialized
[ 0.117221] usbcore: registered new interface driver usbfs
[ 0.117335] usbcore: registered new interface driver hub
[ 0.117461] usbcore: registered new device driver usb
[ 0.117678] mc: Linux media interface: v0.10
[ 0.117765] videodev: Linux video capture interface: v2.00
[ 0.119062] sunxi-msgbox-amp 3003000.msgbox: invalid resource
[ 0.119834] Advanced Linux Sound Architecture Driver Initialized.
[ 0.119848] pwm module init!
[ 0.121630] g2d 5410000.g2d: Adding to iommu group 0
[ 0.122172] G2D: rcq version initialized.major:250
[ 0.123593] clocksource: Switched to clocksource riscv_clocksource
[ 0.138885] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[ 0.157978] thermal_sys: Registered thermal governor 'step_wise'
[ 0.157985] thermal_sys: Registered thermal governor 'user_space'
[ 0.159095] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[ 0.159719] spi spi1: spi1 supply spi not found, using dummy regulator
[ 0.160037] sunxi_spi_resource_get()2062 - [spi1] SPI MASTER MODE
[ 0.160152] sunxi_spi_clk_init()2138 - [spi1] mclk 100000000
[ 0.160971] sunxi_spi_probe()2542 - [spi1]: driver probe succeed, base ffffffd00405e000, irq 32
[ 0.162917] Initialise system trusted keyrings
[ 0.163181] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[ 0.172087] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.193461] Key type asymmetric registered
[ 0.193479] Asymmetric key parser 'x509' registered
[ 0.193518] io scheduler mq-deadline registered
[ 0.193529] io scheduler kyber registered
[ 0.193552] atomic64_test: passed
[ 0.195167] [DISP]disp_module_init
[ 0.195809] disp 5000000.disp: Adding to iommu group 0
[ 0.235122] [DISP] disp_init_hdmi,line:1047:
[ 0.235127] dont support hdmi
[ 0.235552] display_fb_request,fb_id:0
[ 0.249435] [DISP] Fb_copy_boot_fb,line:1444:
[ 0.249440] no boot_fb0
[ 0.249987] disp_al_manager_apply ouput_type:0
[ 0.250397] [DISP] lcd_clk_config,line:731:
[ 0.250412] disp 0, clk: pll(198000000),clk(198000000),dclk(33000000) dsi_rate(198000000)
[ 0.250412] clk real:pll(288000000),clk(288000000),dclk(48000000) dsi_rate(0)
[ 0.251209] [DISP]disp_module_init finish
[ 0.252136] sunxi_sid_init()506 - insmod ok
[ 0.260444] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[ 0.260881] uart uart0: get regulator failed
[ 0.260914] uart uart0: uart0 supply uart not found, using dummy regulator
[ 0.261361] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI
[ 0.261391] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[ 0.466277] [DISP] disp_sys_gpio_request,line:276:
[ 0.466287] disp_sys_gpio_request failed, gpio_name=lcd_bl_en, gpio=123, value=0, ret=-517
[ 0.466303] [DISP] disp_device_attached_and_enable,line:233:
[ 0.466307] attached ok, mgr0<-->dev0
[ 0.466311] [DISP] disp_device_attached_and_enable,line:236:
[ 0.466320] type:1,mode:0,fmt:rgb,bits:8bits,eotf:4,cs:0 dvi_hdmi:2, range:2 scan:0 ratio:8
[ 0.994686] printk: console [ttyS0] enabled
[ 1.000409] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[ 1.011946] uart uart1: get regulator failed
[ 1.016846] uart uart1: uart1 supply uart not found, using dummy regulator
[ 1.024981] uart1: ttyS1 at MMIO 0x2500400 (irq = 19, base_baud = 1500000) is a SUNXI
[ 1.035101] misc dump reg init
[ 1.040160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.047503] sunxi-ehci: EHCI SUNXI driver
[ 1.052562] get ehci0-controller wakeup-source is fail.
[ 1.058561] sunxi ehci0-controller don't init wakeup source
[ 1.064886] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000704330, 0x:ffffffd004070000, irq_no:2e
[ 1.078438] [sunxi-ehci0]: Not init ehci0
[ 1.083366] get ehci1-controller wakeup-source is fail.
[ 1.089374] sunxi ehci1-controller don't init wakeup source
[ 1.095694] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0007046f0, 0x:ffffffd004074000, irq_no:31
[ 1.109277] hci: sunxi_insmod_ehci()600 WARN: get supply failed
[ 1.115960] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[ 1.123240] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 1.133176] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[ 1.163646] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[ 1.172630] hub 1-0:1.0: USB hub found
[ 1.177016] hub 1-0:1.0: 1 port detected
[ 1.182353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.189430] sunxi-ohci: OHCI SUNXI driver
[ 1.194541] get ohci0-controller wakeup-source is fail.
[ 1.200538] sunxi ohci0-controller don't init wakeup source
[ 1.206814] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000704e70
[ 1.217276] [sunxi-ohci0]: Not init ohci0
[ 1.222202] get ohci1-controller wakeup-source is fail.
[ 1.228214] sunxi ohci1-controller don't init wakeup source
[ 1.234537] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000705230
[ 1.245053] hci: sunxi_insmod_ohci()265 WARN: get supply failed
[ 1.251702] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[ 1.259023] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[ 1.268923] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[ 1.348909] hub 2-0:1.0: USB hub found
[ 1.353174] hub 2-0:1.0: 1 port detected
[ 1.358896] usbcore: registered new interface driver uas
[ 1.365171] usbcore: registered new interface driver usb-storage
[ 1.372038] usbcore: registered new interface driver ums-alauda
[ 1.378824] usbcore: registered new interface driver ums-cypress
[ 1.385721] usbcore: registered new interface driver ums-datafab
[ 1.392508] usbcore: registered new interface driver ums_eneub6250
[ 1.399594] usbcore: registered new interface driver ums-freecom
[ 1.406519] usbcore: registered new interface driver ums-isd200
[ 1.413186] usbcore: registered new interface driver ums-jumpshot
[ 1.420168] usbcore: registered new interface driver ums-karma
[ 1.426801] usbcore: registered new interface driver ums-onetouch
[ 1.433811] usbcore: registered new interface driver ums-realtek
[ 1.440601] usbcore: registered new interface driver ums-sddr09
[ 1.447411] usbcore: registered new interface driver ums-sddr55
[ 1.454210] usbcore: registered new interface driver ums-usbat
[ 1.461198] mousedev: PS/2 mouse device common for all mice
[ 1.468390] ts probe start
[ 1.468830] input: 2009c00.rtp as /devices/platform/soc@3000000/2009c00.rtp/input/input0
[ 1.481596] ts probe success
[ 1.482002] sunxi_gpadc_init,1968, success
[ 1.490209] sunxi_key_init: get key count failed
[ 1.490227] sunxi_gpadc_setup: get channel scan data failed
[ 1.501994] input: sunxi-gpadc0 as /devices/virtual/input/input1
[ 1.509286] input: sunxi-gpadc1 as /devices/virtual/input/input2
[ 1.517218] sunxi-rtc 7090000.rtc: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[ 1.529790] sunxi-rtc 7090000.rtc: registered as rtc0
[ 1.535661] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[ 1.544639] sunxi-rtc 7090000.rtc: sunxi rtc probed
[ 1.550509] i2c /dev entries driver
[ 1.554608] IR NEC protocol handler initialized
[ 1.559709] IR RC5(x/sz) protocol handler initialized
[ 1.565398] IR RC6 protocol handler initialized
[ 1.570478] IR JVC protocol handler initialized
[ 1.575569] IR Sony protocol handler initialized
[ 1.580752] IR SANYO protocol handler initialized
[ 1.586036] IR Sharp protocol handler initialized
[ 1.591308] IR MCE Keyboard/mouse protocol handler initialized
[ 1.597853] IR XMP protocol handler initialized
[ 1.602938] ir_imon_decoder: IR iMON protocol handler initialized
[ 1.609779] IR RCMM protocol handler initialized
[ 1.615746] sunxi cedar version 1.1
[ 1.620003] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[ 1.626394] VE: install start!!!
[ 1.626394]
[ 1.631997] VE: cedar-ve the get irq is 6
[ 1.631997]
[ 1.638510] VE: ve_debug_proc_info:(ptrval), data:(ptrval), lock:(ptrval)
[ 1.638510]
[ 1.650181] VE: install end!!!
[ 1.650181]
[ 1.656853] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[ 1.669030] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[ 1.679149] sunxi-mmc 4020000.sdmmc: ctl-spec-caps 8
[ 1.685452] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[ 1.691794] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[ 1.698289] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[ 1.704751] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[ 1.711296] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[ 1.717911] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[ 1.724471] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[ 1.732019] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.743261] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[ 1.763454] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.787759] sunxi-mmc 4020000.sdmmc: detmode:manually by software
[ 1.787815] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.807035] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.19 2021-03-24 19:50)
[ 1.817130] sunxi-mmc 4021000.sdmmc: ctl-spec-caps 8
[ 1.823365] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[ 1.829891] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[ 1.836435] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[ 1.842905] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[ 1.849507] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.861145] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[ 1.867790] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[ 1.874478] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[ 1.881113] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[ 1.890636] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.903006] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.914296] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[ 1.923225] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.934880] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.955788] random: fast init done
[ 1.959682] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[ 1.967427] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 1.975128] usbcore: registered new interface driver usbhid
[ 1.981399] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[ 1.988366] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.000038] usbhid: USB HID core driver
[ 2.004702] fbtft_of_value: buswidth = 8
[ 2.009208] mmc0: unrecognised SCR structure version 6
[ 2.015046] fbtft_of_value: debug = 0
[ 2.019232] mmc0: error -22 whilst initialising SD card
[ 2.025147] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 2.036813] fbtft_of_value: rotate = 90
[ 2.041153] fbtft_of_value: fps = 60
[ 2.045217] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 2.056785] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[ 2.070128] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.077737] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.085307] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.092867] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[ 2.099689] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 2.353629] *ssd1353_init
[ 2.455500] rotate 90
[ 2.463056] xs 0 xe 127 ys 0 ye 159
[ 2.476286] graphics fb1: fb_ssd1353 frame buffer, 128x160, 40 KiB video memory, 4 KiB buffer memory, fps=100, spi1.0 at 48 MHz
[ 2.495920] usbcore: registered new interface driver snd-usb-audio
[ 2.507383] [AUDIOCODEC][sunxi_codec_parse_params][2094]:digital_vol:0, lineout_vol:26, mic1gain:19, mic2gain:19 pa_msleep:120, pa_level:1, pa_pwr_level:1
[ 2.507383]
[ 2.524629] [AUDIOCODEC][sunxi_codec_parse_params][2130]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[ 2.536181] [AUDIOCODEC][sunxi_internal_codec_probe][2266]:codec probe finished
[ 2.545947] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[ 2.551685] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[ 2.561581] [SNDCODEC][sunxi_card_init][583]:card init finished
[ 2.569482] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[ 2.581100] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input3
[ 2.593398] [SNDCODEC][sunxi_card_dev_probe][832]:register card finished
[ 2.601768] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: id:sunxi,dsp-msgbox new channel: 0x202 -> 0x102!
[ 2.613477] rpmsg_hifi 3003000.msgbox.sunxi,dsp-msgbox.514.258: rpmsg hifi[0] client driver is probed
[ 2.624949] Loading compiled-in X.509 certificates
[ 2.633382] HDMI2.0 module init end
[ 2.666447] debugfs: Directory '2031000.dmic' with parent 'snddmic' already present!
[ 2.677234] sunxi-audio-card 2031060.sounddmic: dmic-hifi <-> 2031000.dmic mapping ok
[ 2.689791] clk: Not disabling unused clocks
[ 2.694677] ALSA device list:
[ 2.698009] #0: audiocodec
[ 2.701253] #1: snddmic
[ 2.704236] alloc_fd: slot 0 not NULL!
[ 2.708941] VFS: Cannot open root device "mmcblk0p5" or unknown-block(0,0): error -6
[ 2.717732] Please append a correct "root=" boot option; here are the available partitions:
[ 2.727177] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 2.736401] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.61 #465
[ 2.742996] Call Trace:
[ 2.745738] [<ffffffe0000293ce>] walk_stackframe+0x0/0xa0
[ 2.751757] [<ffffffe0000295b0>] show_stack+0x2a/0x34
[ 2.757395] [<ffffffe00047f7f6>] dump_stack+0x20/0x28
[ 2.763030] [<ffffffe00002e376>] panic+0xee/0x2b6
[ 2.768266] [<ffffffe000000eda>] mount_block_root+0x1ee/0x28a
[ 2.774671] [<ffffffe000000ffc>] mount_root+0x86/0x90
[ 2.780299] [<ffffffe000001116>] prepare_namespace+0x110/0x152
[ 2.786799] [<ffffffe000000b78>] kernel_init_freeable+0x17e/0x19a
[ 2.793591] [<ffffffe000492c4e>] kernel_init+0x12/0xee
[ 2.799321] [<ffffffe000028018>] ret_from_exception+0x0/0xc
[ 2.805538] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---