全志d1s新建了一个方案之后编译出错
-
code_text ``` OBJCOPY u-boot.srec OBJCOPY u-boot-nodtb.bin '/home/liangweiwei/tina-d1-h/device/config/chips/d1s/configs/my_mq_board/uboot-board.dts' -> '/home/liangweiwei/tina-d1-h/lichee/brandy-2.0/u-boot-2018/arch/riscv/dts/.board-uboot.dts' SYM u-boot.sym DTC arch/riscv/dts/sun20iw1p1-soc-system.dtb SHIPPED dts/dt.dtb FDTGREP dts/dt-spl.dtb ./scripts/dtc/dtc -W no-unit_address_vs_reg -W no-unit_address_format -W no-simple_bus_reg -W no-pwms_property -I dtb -O dts /home/liangweiwei/tina-d1-h/lichee/brandy-2.0/u-boot-2018/arch/riscv/dts/"sun20iw1p1-soc-system".dtb > u-boot-dtb.dts CAT u-boot-dtb.bin COPY u-boot.dtb COPY u-boot.bin 'u-boot.bin' -> 'u-boot-sun20iw1p1.bin' 'u-boot-sun20iw1p1.bin' -> './../../../device/config/chips/d1s/bin/u-boot-sun20iw1p1.bin' CFGCHK u-boot.cfg muboot success! === Start build scp.bin === Platform d1s Skip marisc. [2] 677223 make[5]: *** d1s_my_mq_board: No such file or directory. Stop. make[4]: *** [Makefile:13: prereq] Error 2 make[3]: *** [target/Makefile:22: target/allwinner/prereq] Error 2 make[2]: *** [target/Makefile:15: /home/liangweiwei/tina-d1-h/out/d1s-my_mq_board/staging_dir/target/stamp/.target_prereq] Error 2 make[1]: *** [/home/liangweiwei/tina-d1-h/build/toplevel.mk:290: prereq] Error 2 make: *** [/home/liangweiwei/tina-d1-h/build/toplevel.mk:304: world] Error 2 [2]+ Done $T/tools/build/buildserver --path $T 2> /dev/null 1>&2 #### make failed to build some targets (55 seconds) ####
code_text
请问各位大佬 这是哪一步出错了?
Copyright © 2023 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号