Tina通过命令行连接WiFi

[aldfaaa]

首先配置wpa_supplicant的配置文件:/etc/wifi/ake.conf

ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
        ssid="(SSID)"
        psk="(PWD)"
}

然后

# 主要连接操作
 wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wifi/ake.conf -B
# 通过DHCP服务获得IP地址等信息
udhcpc -i wlan0 -B

# 搜索WIFI
wpa_cli -iwlan0 scan
wpa_cli -iwlan0 scan_result

# 检查WiFi连接状态
wpa_cli -iwlan0 status

WiFi已连接的应答

想开机配置网络和WiFi, 可以修改/etc/init.d/wpa_supplicant文件第48行左右:

if [ x$brlan=="xbr-lan" ]; then
    echo "change the default ip address 192.168.1.1"
    ifconfig br-lan 192.168.100.1
    # 加你所想操作的指令
fi

[BedRock]

我又一个更好的方法，不知当讲不当讲，

忍不住了，我还是说说

1.扫描wifi

root@TinaLinux:/# wifi_scan_results_test

*********************************
***Start scan!***
*********************************
bssid / frequency / signal level / flags / ssid
90:67:1c:f8:11:ac       2422    -37     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]       AW-PDC-RTOS-MUSIC
9c:9d:7e:e1:a7:c6       2462    -45     [WPA2-PSK-CCMP][WPS][ESS]       Redmi_9EC8
88:d7:f6:88:8b:c0       2412    -50     [WPA2-PSK-CCMP][WPS][ESS]       AW-PDC-PD4-316Test
34:29:12:ac:c3:b9       2462    -56     [WPA2-PSK-CCMP][WPS][ESS]
50:d2:f5:f1:b7:08       2457    -58     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]       AW-PDC-PD2-xiaomi2.4g
34:29:12:ac:c3:b8       2462    -59     [WPA2-PSK-CCMP][WPS][ESS]       AW-PDC-KY_IPV6_1
80:e8:6f:d9:6b:80       2437    -61     [WPA-EAP-CCMP][WPA2-EAP-CCMP][ESS]      AWOffice
3c:20:93:0e:2f:97       2412    -54     [WPA-PSK-TKIP][WPA2-PSK-CCMP][ESS]      test_123
7e:b5:9b:1d:e2:89       2437    -64     [WPA2-PSK-CCMP][ESS]    AWTest
7c:b5:9b:fd:e2:89       2437    -65     [WPA-EAP-CCMP+TKIP][WPA2-EAP-CCMP+TKIP][ESS]    AWOffice
7e:b5:9b:2d:e2:89       2437    -66     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    CangKu-221
7e:b5:9b:3d:e2:89       2437    -66     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    AW-MLC-221
80:e8:6f:d9:6b:82       2437    -62     [WPA2-PSK-CCMP][ESS]    AWTest
ac:e3:42:9c:7f:78       2412    -64     [WPA2-PSK-CCMP][WPS][ESS]       AW-PDC-PSW-CAI
04:d4:c4:b9:b9:f8       2457    -67     [WPA2-PSK-CCMP][WPS][ESS]       ipv6
5c:a4:8a:bf:25:72       2437    -68     [WPA2-PSK-CCMP][ESS]    AWTest
5c:a4:8a:bf:25:70       2437    -69     [WPA-EAP-CCMP][WPA2-EAP-CCMP][ESS]      AWOffice
bc:67:1c:f8:9f:80       2427    -70     [WPA2-PSK-CCMP][ESS]    AWTest
2e:f4:32:07:7e:02       2452    -73     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]    OUT RF
80:e8:6f:d9:fd:a2       2412    -74     [WPA2-PSK-CCMP][ESS]    AWTest
38:1c:1a:2e:b3:50       2437    -74     [WPA-EAP-CCMP][WPA2-EAP-CCMP][ESS]      AWOffice
80:e8:6f:d9:fd:a0       2412    -75     [WPA-EAP-CCMP][WPA2-EAP-CCMP][ESS]      AWOffice
38:1c:1a:2e:b3:52       2437    -75     [WPA2-PSK-CCMP][ESS]    AWTest
ec:6c:9f:af:89:79       2452    -76     [WPA2-PSK-CCMP][ESS]    AW-APD-GMSipv6
66:6e:97:1a:5a:e4       2462    -81     [WPA2-PSK-CCMP][ESS]    AWTest
8c:be:be:2d:ec:22       2412    -81     [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]       AW-AE2-TEST1
80:8f:1d:8a:36:76       2412    -61     [ESS]   AW-PDC-PD2-TEST-2.4G
fc:53:9e:c1:b9:2d       2462    -72     [ESS]   MEIZUtest
******************************
Wifi get_scan_results: Success!
******************************

2. 连接wifi

# 后面两个参数是  ssid 和 pwd
root@TinaLinux:/# wifi_connect_ap_test AWTest xxxxxx
==================================
Connecting to the network(AWTest)......
Connected to the AP(AWTest)
Getting ip address(AWTest)......
Wifi connect ap : Success!
==================================

开机连接如上

[zjs0920]

This post is deleted!

[yi20416yi]

@bedrock

这个怎么解决呢？

[yi20416yi]

@bedrock

请问一下这是什么原因？

[spr2023]

@yi20416yi log提示你检查驱动，你要先确定内核配置文件里面WiFi相关的驱动和选项都选好了，WiFi驱动也没问题并且编译上了，还有那你设备树sdio引脚和WiFi regon什么的引脚之类的，再或者你WiFi驱动的固件文件是对的，嗯。。很多