关于H616 kernel网卡驱动编译问题

[CWEIB]

想请教一下在kernel编译中，是不是只需要在menuconfig中打开下面的配置，编译就能使用吗？

PHY Device support and infrastructure  --->
      <*>   Realtek PHYs

在设备树中添加了相关信息：

&emac0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ext_rgmii_pins>;
	phy-mode = "rgmii";
	phy-handle = <&ext_rgmii_phy>;
	allwinner,rx-delay-ps = <1800>;
	allwinner,tx-delay-ps = <700>;
	status = "okay";
};

&mdio0 {
	ext_rgmii_phy: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
	};
};

我在添加了上面的两部分后使用ifconfig -a只有lo，其他都没有显示，使用 ifconfig eth0 up 后显示的是

ifconfig: SIOCGIFFLAGS: No such device

[CWEIB]

在Uboot中是正常的，能识别也能ping通

[CWEIB]

在mdio_bus下能看到已经网卡的相关信息，但是在ifconfig -a中还是没有显示eth0

[kevin_allwinner]

请问搞了吗？能分享下不，谢谢

[aaabbb222]

@cweib
同问，请问最后怎么解决了？ 我的是启动了ch310驱动后，网络就废了。

[weilin]

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ (1) -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=m]) │
│ (3) -> STMMAC Platform bus support (STMMAC_PLATFORM [=m])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y]) │
│ -> STMMAC Platform bus support (STMMAC_PLATFORM [=y]) │
│ (1) -> Allwinner sun8i GMAC support (DWMAC_SUN8I [=m])

-> Device Drivers │
│ -> Network device support (NETDEVICES [=y]) │
│ -> Ethernet driver support (ETHERNET [=y]) │
│ -> STMicroelectronics devices (NET_VENDOR_STMICRO [=y]) │
│ -> STMicroelectronics Multi-Gigabit Ethernet driver (STMMAC_ETH [=y]) │
│ (1) -> STMMAC Platform bus support (STMMAC_PLATFORM [=y])

Symbol: PCS_XPCS [=y] │
│ Type : tristate │
│ Defined at drivers/net/pcs/Kconfig:8 │
│ Depends on: NETDEVICES [=y] │
│ Selects: PHYLINK [=y] │
│ Selected by [y]: │
│ - STMMAC_ETH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_STMICRO [=y] && HAS_IOMEM [=y] && HAS_DMA [=y] && PTP_1588_CLOCK_OPTIONAL [=y] │
│ Selected by [n]: │
│ - NET_DSA_SJA1105 [=n] && NETDEVICES [=y] && NET_DSA [=y] && SPI [=y] && PTP_1588_CLOCK_OPTIONAL [=y]

配置这几个应该就行了，这是kernel6.1的