R128-S2 驱动 1024x600 RGB 显示屏 并运行 LVGL

[awwwwa]

由于屏幕较大首先精简系统内存，关闭DSP核心，并将 RV 核心移到 HSPSRAM 上提高带宽。配置 LV_COLOR_DEPTH 16 提高帧率降低内存占用

patch 如下，增加了新方案r128-devkit-rgb：161ca91b-f759-4108-8bfc-85114394da0c-r128-devkit-rgb.tar.gz

编译打包即可

700ms启动 LVGL：

[awwwwa]

屏参改一下

lcd_driver_name     = "default_lcd"
lcd_backlight       = 150
lcd_if              = 0
lcd_x               = 1024
lcd_y               = 600
lcd_width           = 150
lcd_height          = 94
lcd_rb_swap         = 0
lcd_dclk_freq       = 48
lcd_pwm_used        = 1
lcd_pwm_ch          = 7
lcd_pwm_freq        = 500000
lcd_pwm_pol         = 1
lcd_hbp             = 160
lcd_ht              = 1344
lcd_hspw            = 20
lcd_vbp             = 20
lcd_vt              = 635
lcd_vspw            = 3
lcd_lvds_if         = 0
lcd_lvds_colordepth = 1
lcd_lvds_mode       = 0
lcd_frm             = 0
lcd_io_phase        = 0x0000
lcd_gamma_en        = 0
lcd_bright_curve_en = 0
lcd_cmap_en         = 0