T113S3 无法完全启动
-
T113S3 , SD卡启动后显示一部分log 就不再动了, 请问是什么原因?
U-Boot 2018.05-g24521d6-dirty (Nov 29 2023 - 14:57:07 +0800) Allwinner Technology [00.339]CPU: Allwinner Family [00.342]Model: sun8iw20 I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH ready [00.363]DRAM: 128 MiB [00.366]Relocation Offset is: 04ec0000 [20]HELLO! BOOT0 is starting! [23]BOOT0 commit : 88480af-dirty [26]set pll start [32]periph0 has been enabled [35]set pll end [36][pmu]: bus read error [39]board init ok [41]ZQ value = 0x30 [42]get_pmu_exist() = -1 [45]ddr_efuse_type: 0xa [47]trefi:7.8ms [50][AUTO DEBUG] single rank and full DQ! [54]ddr_efuse_type: 0xa [56]trefi:7.8ms [58][AUTO DEBUG] rank 0 row = 13 [61][AUTO DEBUG] rank 0 bank = 8 [65][AUTO DEBUG] rank 0 page size = 2 KB [68]DRAM BOOT DRIVE INFO: V0.33 [71]DRAM CLK = 936 MHz [74]DRAM Type = 3 (2:DDR2,3:DDR3) [77]DRAMC read ODT off. [79]DRAM ODT value: 0x42. [82]ddr_efuse_type: 0xa [85]DRAM SIZE =128 M [87]dram_tpr4:0x0 [88]PLL_DDR_CTRL_REG:0xf8004d00 [91]DRAM_CLK_REG:0xc0000000 [94][TIMING DEBUG] MR2= 0x20 [102]DRAM simple test OK. [104]rtc standby flag is 0x0, super standby flag is 0x0 [109]dram size =128 [112]card no is 0 [114]sdcard 0 line count 4 [116][mmc]: mmc driver ver 2021-05-21 14:47 [125][mmc]: Wrong media type 0x0 [128][mmc]: ***Try SD card 0*** [138][mmc]: HSSDR52/SDR25 4 bit [140][mmc]: 50000000 Hz [143][mmc]: 60874 MB [145][mmc]: ***SD/MMC 0 init OK!!!*** [269]Loading boot-pkg Succeed(index=0). [273]Entry_name = u-boot [280]Entry_name = optee [284]Entry_name = dtb [287]mmc not para [288]Jump to second Boot. M/TC: OP-TEE version: 6aef7bb2-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Fri Jul 23 09:25:11 UTC 2021 arm U-Boot 2018.05-g24521d6-dirty (Nov 29 2023 - 14:57:07 +0800) Allwinner Technology [00.342]CPU: Allwinner Family [00.344]Model: sun8iw20 I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH ready [00.366]DRAM: 128 MiB [00.369]Relocation Offset is: 04ec0000
-
clean之后重新编译一般就可以了
-
@myamoroso 在 T113S3 无法完全启动 中说:
I2C: FDT ERROR:fdt_set_all_pin:[twi0]-->FDT_ERR_BADPATH
FDT ERROR:fdt_set_all_pin:[twi1]-->FDT_ERR_BADPATH检查一下是不是分区空间不够了
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号