directfb运行起来了, 但是以4倍姿态

[ztcontrol]

&lcd0 {
	lcd_used            = <1>;
	lcd_driver_name     = "tft08006";

	/* DSI */
	lcd_if              = <4>;
	lcd_dsi_if          = <0>;

	
	lcd_x               = <1024>;
	lcd_y               = <600>;
	lcd_width           = <192>;
	lcd_height          = <108>;
	lcd_dclk_freq       = <51>;
	lcd_hbp             = <160>;
	lcd_ht              = <1344>;
	lcd_hspw            = <8>;
	lcd_vbp             = <23>;
	lcd_vt              = <635>;
	lcd_vspw            = <10>;

	lcd_backlight       = <100>;
	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <1000>;
	lcd_pwm_pol         = <0>;
	lcd_pwm_max_limit   = <255>;

	lcd_dsi_lane        = <4>;
	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <0>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <0>;
	lcd_hv_clk_phase    = <0>;
	lcd_hv_sync_polarity= <0>;
	lcd_io_phase        = <0x0000>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;
	lcd_fsync_en        = <0>;
	lcd_fsync_act_time  = <1000>;
	lcd_fsync_dis_time  = <1000>;
	lcd_fsync_pol       = <0>;

	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	lcd_gpio_0 =  <&pio PD 20 GPIO_ACTIVE_HIGH>;
	pinctrl-0 = <&dsi4lane_pins_a>;
	pinctrl-1 = <&dsi4lane_pins_b>;

root@TinaLinux:/# cat /sys/class/disp/disp/attr/sys
screen 0:
de_rate 300000000 hz, ref_fps:60
mgr0: 1024x600 fmt[rgb] cs[0x204] range[full] eotf[0x4] bits[8bits] err[0] force_sync[0] unblank direct_show[false] iommu[1]
dmabuf: cache[0] cache max[0] umap skip[0] umap skip max[14]
        lcd output      backlight(100)  fps:60.6        1024x 600
        err:1   skip:105        irq:41527       vsync:0 vsync_skip:0
   BUF    enable ch[1] lyr[0] z[16] prem[N] a[pixel 255] fmt[  0] fb[1024, 600;1024, 600;1024, 600] crop[   0,   0,1024, 600] frame[   0,   0,1024, 600] addr[ff800000,       0,       0] flags[0x       0] trd[0,0]
depth[ 0] root@TinaLinux:/#