F133编译出现错误,不知道怎么解决。
-
prfdcach.c: At top level:
prfdcach.c:153:42: error: unknown type name 'PRIntn'; did you mean 'PRInt64'?
PR_IMPLEMENT(PRStatus) PR_SetFDCacheSize(PRIntn low, PRIntn high)
^~~~~~
PRInt64
prfdcach.c:153:54: error: unknown type name 'PRIntn'; did you mean 'PRInt64'?
PR_IMPLEMENT(PRStatus) PR_SetFDCacheSize(PRIntn low, PRIntn high)
^~~~~~
PRInt64
../../../config/rules.mk:446: recipe for target 'prfdcach.o' failed
make[7]: *** [prfdcach.o] Error 1
make[7]: Leaving directory '/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/nspr/pr/src/io'
../../config/rules.mk:163: recipe for target 'export' failed
make[6]: *** [export] Error 2
make[6]: Leaving directory '/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/nspr/pr/src'
../config/rules.mk:163: recipe for target 'export' failed
make[5]: *** [export] Error 2
make[5]: Leaving directory '/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/nspr/pr'
config/rules.mk:163: recipe for target 'export' failed
make[4]: *** [export] Error 2
make[4]: Leaving directory '/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/nspr'
Makefilerecipe for target '/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/.built' failed
make[3]: *** [/home/test/LC/Tina-Linux/out/f133-mq_r/compile_dir/target/nspr-4.12/.built] Error 2
make[3]: Leaving directory '/home/test/LC/Tina-Linux/package/libs/nspr'
package/Makefile:192: recipe for target 'package/libs/nspr/compile' failed
make[2]: *** [package/libs/nspr/compile] Error 2
make[2]: Leaving directory '/home/test/LC/Tina-Linux'
package/Makefile:189: recipe for target '/home/test/LC/Tina-Linux/out/f133-mq_r/staging_dir/target/stamp/.package_compile' failed
make[1]: *** [/home/test/LC/Tina-Linux/out/f133-mq_r/staging_dir/target/stamp/.package_compile] Error 2
make[1]: Leaving directory '/home/test/LC/Tina-Linux'
/home/test/LC/Tina-Linux/build/toplevel.mk:304: recipe for target 'world' failed
make: *** [world] Error 2make failed to build some targets (47:41 (mm:ss))
-
目测,你跟我用的,同一家的板子……哈哈
如果是你动了menuconfig,但又不知道动了那里之后引起的,还原config,路径LC/Tina-Linux/device/config/chips/f133/configs/mq_r/linux-5.4
下面的config-5.4_recovery覆盖config-5.4,然后试试
-
@zhangjingxun12 我是安装apache,然后编译就编译不过去。
-
@zhangjingxun12 我是想安装apache,一安装这个就无法编译过去。
-
@bugwtq 这就不知道了,没用过,但从错误看,可能涉及到apache的源码,是数据类型不匹配……没有提示依赖错误
Copyright © 2023 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号