T113-i tina 启动时卡在uboot 显示emmc出错

vc LV 4

[120]HELLO! BOOT0 is starting!
[123]BOOT0 commit : 069ed30b88
[126]set pll start
[128]fix vccio detect value:0xc0
[136]periph0 has been enabled
[139]set pll end
[140][pmu]: bus read error
[143]board init ok
[145]enable_jtag
[146]get_pmu_exist() = -1
[149]ddr_efuse_type: 0x0
[151]trefi:7.8ms
[154][AUTO DEBUG] single rank and full DQ!
[158]ddr_efuse_type: 0x0
[160]trefi:7.8ms
[163][AUTO DEBUG] rank 0 row = 15
[166][AUTO DEBUG] rank 0 bank = 8
[169][AUTO DEBUG] rank 0 page size = 2 KB
[173]DRAM BOOT DRIVE INFO: V0.34
[177]DRAM CLK = 792 MHz
[179]DRAM Type = 3 (2:DDR2,3:DDR3)
[182]DRAMC ZQ value: 0x7b7bfb
[185]DRAM ODT value: 0x42.
[188]ddr_efuse_type: 0x0
[191]DRAM SIZE = 512 MB
[198]DRAM simple test OK.
[200]rtc standby flag is 0x0, super standby flag is 0x0
[205]dram size =512
[208]card no is 0
[210]sdcard 0 line count 4
[212][mmc]: mmc driver ver 2021-05-21 14:47
[222][mmc]: Wrong media type 0x0
[225][mmc]: ***Try SD card 0***
[254][mmc]: HSSDR52/SDR25 4 bit
[257][mmc]: 50000000 Hz
[259][mmc]: 3781 MB
[261][mmc]: ***SD/MMC 0 init OK!!!***
[365]Loading boot-pkg Succeed(index=0).
[369]Entry_name        = u-boot
[377]Entry_name        = optee
[381]Entry_name        = dtb
[384]mmc not para
[385]Jump to second Boot.
M/TC: OP-TEE version: 2a99a16f (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Thu Aug 17 11:13:02 UTC 2023 arm
E/TC:0 0 platform_standby_fdt_parse:126 no pmu0 node
E/TC:0 0 sunxi_twi_parse_from_dt:121 no pmu node


U-Boot 2018.07-g0317dec-dirty (Mar 26 2024 - 09:11:55 +0000) Allwinner Technology

[00.457]CPU:   Allwinner Family
[00.460]Model: sun8iw20
I2C:   ready
[00.480]DRAM:  512 MiB
[00.483]Relocation Offset is: 1ce93000
[00.513]secure enable bit: 0
E/TC:0   fdt_getprop_u32:336 prop trace_level not found
[00.527]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.534]gic: sec monitor mode
SPI ALL:   ready
[00.539]line:719 init_clocks
[00.542]flash init start
[00.544]workmode = 0,storage type = 1
[00.548][mmc]: mmc driver ver uboot2018:2023-07-4 16:18:00
[00.553][mmc]: get sdc_type fail and use default host:tm1.
[00.559][mmc]: can't find node "mmc0",will add new node
[00.564][mmc]: fdt err returned <no error>
[00.568][mmc]: Using default timing para
[00.571][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.607][mmc]: card_caps:0x3000000a
[00.610][mmc]: host_caps:0x3000003f
[00.617]sunxi flash init ok
get value error
[00.621]drv_disp_init
partno erro : can't find partition bootloader
[00.680]drv_disp_init finish
[04.695]env/env.c:env_load:233:Waiting for display 1 timeout
[04.700]Loading Environment from SUNXI_FLASH... OK
[04.737]boot_gui_init:start
partno erro : can't find partition Reserve0
[04.747]LCD open finish
bad fb1_cfg[w=0,h=0,bpp=32,format=0]
[04.753]boot_gui_init:finish
partno erro : can't find partition bootloader
[04.763]bmp_name=bootlogo.bmp size 1036854
[04.824]Item0 (Map) magic is bad
[04.827]the secure storage item0 copy0 magic is bad
[04.835]Item0 (Map) magic is bad
[04.838]the secure storage item0 copy1 magic is bad
[04.843]Item0 (Map) magic is bad
secure storage read widevine fail
secure storage read ec_key fail
secure storage read ec_cert1 fail
secure storage read ec_cert2 fail
secure storage read ec_cert3 fail
secure storage read rsa_key fail
secure storage read rsa_cert1 fail
secure storage read rsa_cert2 fail
secure storage read rsa_cert3 fail
[04.873]usb burn from boot
delay time 0
weak:otg_phy_config
[04.884]usb prepare ok
[05.187]overtime
[05.190]do_burn_from_boot usb : no usb exist
cann't get the boot_base from the env
[05.199]update part info
[05.202]update bootcmd
[05.215]change working_fdt 0x5c852e68 to 0x5c832e68
get value error
[05.222][mmc]: get sunxi-mmc0 string failed
[05.227]The storage not support sample function
[05.251]update dts
phy_mode=rgmii, phy_interface=7
get phy-tx-delay fail!geth_sys_init fail!
[05.261]Board Net Initialization Failed
[05.265]No ethernet found.
=====YTR==workmode=0==if_need_auto_force_burn=0, nRet=-1,auto_update_system
Hit <SPACE> key to stop autoboot in  1s
[05.532]no vendor_boot partition is found
Android's image name: sun8i_arm
The loading address of the kernel is not in the boot image
ERROR: reserving fdt memory region failed (addr=41b00000 size=100000)
ERROR: reserving fdt memory region failed (addr=5c8dd000 size=271000)
[05.564]Starting kernel ...

[05.567][mmc]: MMC Device 2 not found
[05.570][mmc]: mmc 2 not find, so not exit

Tronlong_support LV 4

@vc915813805 您好，可是使用SD卡启动方式，看下是否可以正常启动。