Navigation

    全志在线开发者论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • 在线文档
    • 社区主页

    oat-burnboot需要完整编译和打包固件吗

    编译和烧写问题专区
    2
    2
    1113
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      linxingqianglai LV 2 last edited by

      4a25b803-7472-4fe2-8328-06649d884263-image.png

      在研究OTA升级文档中,存在疑惑: 编译完uboot后, 不继续编译和打包固件就没法进行OTA升级吗?OTA更新uboot,在OTA升级中是对每部分镜像进行升级,对kernel,rootfs放入到新区, 对boot0, uboot则覆盖升级。 在这里编译uboot时候为啥讲讲还需要继续编译和打包固件。

      1 Reply Last reply Reply Quote Share 0
      • Z
        zoengjay LV 5 last edited by

        @linxingqianglai 参考前面的说明:

        u-boot.fex 使用 linux3.4/uboot2011 的平台最终用到的 uboot,其实是uboot+sys_config。
        boot_package.fex 使用 linux3.10/uboot2014 及更高版本的平台最终用到的 uboot,其实包含的文件由配置文件 boot_package.cfg决定,一般至少包含了 uboot和 dtb,安全方案会包含一些安全所需文件文件,可能还有 bootlogo 等文件。
        toc1.fex 安全方案使用的 uboot, 类似 boot_package.fex说明,其中实际也包含了 dts 等多个文件。

        1 Reply Last reply Reply Quote Share 1
        • 1 / 1
        • First post
          Last post

        Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号

        行为准则 | 用户协议 | 隐私权政策