T113S3 lvds dual配置不生效

[lztmfx]

lvds1_pins_a: lvds1@0 {
				pins  =  "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PD18", "PD19";
				function = "lvds1";
				drive-strength = <30>;
				bias-disable;
			};

lvds1_pins_b: lvds1@1 {
				pins  = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", "PD18", "PD19";
				function = "io_disabled";
				drive-strength = <30>;
				bias-disable;
			};

&disp {
	disp_init_enable         = <1>;
	disp_mode                = <0>;

	screen0_output_type      = <1>;
	screen0_output_mode      = <10>;

	screen1_output_type      = <1>;
	screen1_output_mode      = <10>;

	// screen1_output_format    = <0>;
	// screen1_output_bits      = <0>;
	// screen1_output_eotf      = <4>;
	// screen1_output_cs        = <257>;
	// screen1_output_dvi_hdmi  = <2>;
	// screen1_output_range     = <2>;
	// screen1_output_scan      = <0>;
	// screen1_output_aspect_ratio = <8>;

	dev0_output_type         = <1>;
	dev0_output_mode         = <4>;
	dev0_screen_id           = <0>;
	dev0_do_hpd              = <0>;

	dev1_output_type         = <1>;
	dev1_output_mode         = <10>;
	dev1_screen_id           = <1>;
	dev1_do_hpd              = <1>;

	def_output_dev           = <0>;
	hdmi_mode_check          = <1>;

	fb0_format               = <9>;
	fb0_width                = <1920>;
	fb0_height               = <1080>;

	fb1_format               = <9>;
	fb1_width                = <1920>;
	fb1_height               = <1080>;
	chn_cfg_mode             = <2>;

	disp_para_zone           = <1>;
	/*VCC-LCD*/
/*	dc1sw-supply = <&reg_dc1sw>;*/
	/*VCC-DSI*/
/*	eldo3-supply = <&reg_eldo3>;*/
	/*VCC-PD*/
/*	dcdc1-supply = <&reg_dcdc1>;*/
};

&lcd0 {
	lcd_used            = <1>;

	lcd_driver_name     = "dual_lvds_lcd";
	lcd_if              = <3>;

	lcd_x               = <1920>;
	lcd_y               = <1080>;
	lcd_width           = <340>;
	lcd_height          = <190>;
	lcd_dclk_freq       = <159>;

	lcd_pwm_used        = <0>;
	lcd_pwm_ch          = <5>;//背光PWM通道号
	lcd_pwm_freq        = <5000>;
	lcd_pwm_pol         = <1>;
	lcd_backlight       = <10>;
	lcd_pwm_max_limit   = <255>;
	//= <&pio PD 27 1 0 3 1>;
	// lcd_bl_en = <&pio PG 3 1 0 3 1>;//背光使能引脚

	lcd_hbp             = <272>;
	lcd_ht              = <2272>;//48
	lcd_hspw            = <32>;
	lcd_vbp             = <80>;
	lcd_vt              = <1169>;//3
	lcd_vspw            = <6>;

	lcd_lvds_if         = <1>;
	lcd_lvds_colordepth = <0>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <0>;
	lcd_hv_clk_phase    = <0>;
	lcd_hv_sync_polarity= <0>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;

	lcd_fsync_en = <0>;
	lcd_fsync_act_time = <1000>;
	lcd_fsync_dis_time = <1000>;
	lcd_fsync_pol = <0>;

	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	lcd_gpio_0 = <&pio PG 3 1 0 3 0>;//背光使能

	pinctrl-0 = <&lvds1_pins_a>;
	pinctrl-1 = <&lvds1_pins_b>;
};

adb shell dump的信息：

root@TinaLinux:/# fbset

mode "1920x1080-60"
        geometry 1920 1080 1920 2160 24
        timings 6289 240 80 74 9 32 6
        accel false
        rgba 8/0,8/8,8/16,0/24
endmode

root@TinaLinux:/# cat /sys/kernel/debug/pinctrl/2000000.pinctrl/pinmux-pins
Pinmux settings per pin
Format: pin (name): mux_owner|gpio_owner (strict) hog?
...
pin 96 (PD0): UNCLAIMED
pin 97 (PD1): UNCLAIMED
pin 98 (PD2): UNCLAIMED
pin 99 (PD3): UNCLAIMED
pin 100 (PD4): UNCLAIMED
pin 101 (PD5): UNCLAIMED
pin 102 (PD6): UNCLAIMED
pin 103 (PD7): UNCLAIMED
pin 104 (PD8): UNCLAIMED
pin 105 (PD9): UNCLAIMED
pin 106 (PD10): UNCLAIMED
pin 107 (PD11): UNCLAIMED
pin 108 (PD12): UNCLAIMED
pin 109 (PD13): UNCLAIMED
pin 110 (PD14): UNCLAIMED
pin 111 (PD15): UNCLAIMED
pin 112 (PD16): UNCLAIMED
pin 113 (PD17): UNCLAIMED
pin 114 (PD18): UNCLAIMED
pin 115 (PD19): UNCLAIMED
pin 116 (PD20): UNCLAIMED
pin 117 (PD21): UNCLAIMED
pin 118 (PD22): UNCLAIMED

....