T113S3 sd卡烧录emmc失败，请问这是什么原因

[jonhon25]

烧录日志

[176]HELLO! BOOT0 is starting!
[179]BOOT0 commit : 09b36272
[182]set pll start
[184]fix vccio detect value:0xc0
[191]periph0 has been enabled
[194]set pll end
[196][pmu]: bus read error
[199]board init ok
[201]enable_jtag
[202]key press :
[204]ZQ value = 0x2f
[206]get_pmu_exist() = -1
[209]ddr_efuse_type: 0xa
[211]mark_id: 0x60
[213]trefi:7.8ms
[215][AUTO DEBUG] single rank and full DQ!
[220]ddr_efuse_type: 0xa
[222]mark_id: 0x60
[224]trefi:7.8ms
[226][AUTO DEBUG] rank 0 row = 13
[229][AUTO DEBUG] rank 0 bank = 8
[233][AUTO DEBUG] rank 0 page size = 2 KB
[237]DRAM BOOT DRIVE INFO: V0.32
[240]DRAM CLK = 792 MHz
[242]DRAM Type = 3 (2:DDR2,3:DDR3)
[246]DRAMC read ODT  off.
[248]DRAM ODT value: 0x42.
[251]ddr_efuse_type: 0xa
[253]mark_id: 0x60
[256]DRAM SIZE =128 M
[258]PLL_DDR_CTRL_REG:0xf8004100
[261]DRAM_CLK_REG:0xc0000000
[264][TIMING DEBUG] MR2= 0x18
[272]DRAM simple test OK.
[274]rtc standby flag is 0x0, super standby flag is 0x0
[279]dram size =128
[282]card no is 0
[284]sdcard 0 line count 4
[286][mmc]: mmc driver ver 2021-05-21 14:47
[296][mmc]: Wrong media type 0x0
[299][mmc]: ***Try SD card 0***
[319][mmc]: HSSDR52/SDR25 4 bit
[322][mmc]: 50000000 Hz
[324][mmc]: 30436 MB
[326][mmc]: ***SD/MMC 0 init OK!!!***
[420]Loading boot-pkg Succeed(index=0).
[424]Entry_name        = u-boot
[431]Entry_name        = optee
[435]Entry_name        = dtb
[438]mmc not para
[439]Jump to second Boot.
M/TC: OP-TEE version: e9372c9c-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #2 Sat Mar 19 11:09:45 UTC 2022 arm


U-Boot 2018.05-g512bff9-dirty (Jul 13 2023 - 07:52:56 +0000) Allwinner Technology

[00.497]CPU:   Allwinner Family
[00.500]Model: sun8iw20
[00.502]DRAM:  128 MiB
[00.505]Relocation Offset is: 04ec1000
[00.542]secure enable bit: 0
E/TC:0   fdt_getprop_u32:343 prop trace_level not found
[00.554]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.560]gic: sec monitor mode
[00.563]flash init start
[00.565]workmode = 0,storage type = 1
[00.568][mmc]: mmc driver ver uboot2018:2021-09-07 19:43:00
[00.574][mmc]: get sdc_type fail and use default host:tm1.
[00.580][mmc]: can't find node "mmc0",will add new node
[00.585][mmc]: fdt err returned <no error>
[00.589][mmc]: Using default timing para
[00.592][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.620][mmc]: card_caps:0x3000000a
[00.624][mmc]: host_caps:0x3000003f
[00.629]sunxi flash init ok
[00.631]line:717 init_clocks
[00.634]drv_disp_init
[00.645]drv_disp_init finish
[00.647]boot_gui_init:start
[00.650]set disp.dev0_output_type fail. using defval=0
partno erro : can't find partition Reserve0
[00.666]Get Reserve0 partition number fail!
no cfs of display devices.
### ERROR ### Please RESET the board ###