T113 电路LVDS 800*480

[Bin1997]

&lcd0 {
lcd_used = <1>;

lcd_driver_name     = "default_lcd";
lcd_backlight       = <50>;
lcd_if              = <3>;

lcd_x               = <800>;
lcd_y               = <480>;
lcd_width           = <95>;
lcd_height          = <54>;

lcd_dclk_freq       = <24>;



lcd_pwm_used        = <0>;
lcd_pwm_ch          = <7>;
lcd_pwm_freq        = <50000>;
lcd_pwm_pol         = <1>;

lcd_pwm_max_limit = <255>;

 lcd_hbp = <48>;
 lcd_ht = <896>;
 lcd_hspw = <4>;
 lcd_vbp = <12>;
 lcd_vt = <504>;
 lcd_vspw = <4>;


lcd_lvds_if         = <0>;
lcd_lvds_colordepth = <0>;
lcd_lvds_mode = <0>;
lcd_frm = <1>;
lcd_hv_clk_phase = <0>;
lcd_hv_sync_polarity= <0>;
lcd_gamma_en = <0>;
lcd_bright_curve_en = <0>;
lcd_cmap_en = <0>;

deu_mode = <0>;
lcdgamma4iep = <22>;
smart_color = <90>;


pinctrl-0 = <&lvds0_pins_a>;
pinctrl-1 = <&lvds0_pins_b>;

};

root@TinaLinux:/#
root@TinaLinux:/#
root@TinaLinux:/# cat /sys/class/disp/disp/attr/sys
screen 0:
de_rate 300000000 hz, ref_fps:53
mgr0: 800x480 fmt[rgb] cs[0x204] range[full] eotf[0x4] bits[8bits] err[0] force_sync[0] unblank direct_show[false] iommu[1]
dmabuf: cache[0] cache max[0] umap skip[0] umap skip max[24]
lcd output backlight( 50) fps:91.7 800x 480
err:0 skip:163 irq:3913 vsync:0 vsync_skip:0
BUF enable ch[1] lyr[0] z[16] prem[N] a[pixel 255] fmt[ 0] fb[ 800, 480; 800, 480; 800, 480] crop[ 0, 0, 800, 480] frame[ 0, 0, 800, 480] addr[ 0, 0, 0] flags[0x 0] trd[0,0]
depth[ 0] root@TinaLinux:/#

关于T113点亮800*480的LVDS屏，开机LOGO正常，进系统跑LVGL例程或者QT例程就会花屏， COLORBAR也无法显示。 帧率那也有问题。 真的请教一下 谢谢各位大佬了