【新人上手】D1哪吒开发板Tina Linux下查看系统内存和测试存储器件读写速率
-
7、查看当前系统内存
查看内存指令：
系统优化满足运行内存≤32MB
echo 3 > /proc/sys/vm/drop_caches; free可以看到
root@TinaLinux:/# echo 3 > /proc/sys/vm/drop_caches; [ 1130.933910] ash (138): drop_caches: 3 root@TinaLinux:/# free total used free shared buffers cached Mem: 1021656 37612 984044 36 548 4204 -/+ buffers/cache: 32860 988796 Swap: 0 0 08、查看储存情况
SPI-Nand大小查看，方式一：
cat /proc/partitions可见
root@TinaLinux:/# cat /proc/partitions major minor #blocks name 31 0 1024 mtdblock0 31 1 4096 mtdblock1 31 2 1024 mtdblock2 31 3 256000 mtdblock3 254 0 20412 ubiblock0_5以上所有相加即为262144KB=256M。
方式二：启动log中已经包含
[ 1.425770] sunxi-spinand-phy: TotalSize: 256 M9、SPI-Nand顺序写
SPI-Nand顺序写：>=2MB/s(四线)。
先切换到性能模式
root@TinaLinux:/# echo "performance" /sys/devices/system/cpu/cpufreq/policy0/sc aling_governor后执行
tt /spec/storage/seq可见如下内容：
root@TinaLinux:/# tt /spec/storage/seq [DEBUG]: ---enter init_entry [DEBUG]: --before bind [ERROR]: bind socket fail [ERROR]: socket init fail [ERROR]: (dragonmat_init-289): init entry of socket_db failed ============================ tasks list ============================ /spec/storage/seq ============================ end ============================ [ 3863.564843] [BH_WRN] miss interrupt! ------------------- INFO ------------------- fast mode: false async mode: ddr total size: 1021656 KB cpu policy: performance flash device: overlayfs:/overlay flash device fs: ubifs flash device size: 176576 KB flash device free: 78956 KB test directory: /mnt/UDISK test file size: 73728 KB test block size: 4096 KB test times for average: 3 ------------------- END ------------------- filling ...... OK (4608KB in 5s) =========== the 1 times =========== clear cache sync real 0m 0.62s user 0m 0.00s sys 0m 0.02s [ 3870.916775] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:04:32 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 1334 1303 iozone test complete. clear cache sync real 0m 1.51s user 0m 0.00s sys 0m 0.02s [ 3989.626106] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:06:31 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 2040 1356 iozone test complete. /usr/bin/spec-seq.sh: line 208: arithmetic syntax error 2610 615266 iozone test complete. =========== the 2 times =========== clear cache sync real 0m 0.05s user 0m 0.02s sys 0m 0.00s [ 4023.326958] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:07:05 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 2621 2653 iozone test complete. clear cache sync real 0m 0.03s user 0m 0.00s sys 0m 0.01s [ 4081.982781] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:08:03 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 4787 606201 iozone test complete. =========== the 3 times =========== clear cache sync real 0m 0.04s user 0m 0.00s sys 0m 0.02s [ 4099.957266] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:08:22 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 2749 2643 iozone test complete. clear cache sync real 0m 0.05s user 0m 0.00s sys 0m 0.01s [ 4157.455638] spec-seq.sh (700): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:09:19 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 73728 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 73728k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 73728 4096 4792 613387 iozone test complete. ------------------- SEQ SPEED ------------------- seq read: 4063 KB/s seq write: 2234 KB/s ------------------- end ------------------- ======================== Testcase Information ======================== </spec/storage/seq>: seq read: 4063 KB/s seq write: 2234 KB/s ---------------------------- /spec/storage/seq ---------------------------- * task path : /spec/storage/seq * task command : spec-seq.sh * run times(real/max) : 1/1 * run parallel : no * run alone : no * may reboot : no * run once time limit : 30758400s * run time limit : 30758400s * timeout with : pass * exit once failed : no * real-time log: yes * begin date : Thu Jan 1 09:04:19 1970 * end date : Thu Jan 1 09:09:37 1970 * result : * num pid pgid return begin end note * 0 699 698 0 01:04:19 01:09:37 * task resource : * user cpu time = 10.421 * system cpu time = 167.940 * maximum resident size = 11034kB * page faults break times (without I/O) = 50615 * page faults break times (with I/O) = 59 * input times = 0 * output times = 0 * wait resource actively times = 288124 * wait resource passively times = 2409102 * run log: real_time_log was set, None! ---------------------------- end ---------------------------- ============================ tasks result ============================ /spec/storage/seq - YES ============================ end ============================10、SPI-Nand顺序读
SPI-Nand顺序读:SPI-Nand顺序读：>=4MB/s(四线)
先切换到性能模式：
echo "performance" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor再执行测试命令 ：
tt /spec/storage/seq结果如下：
root@TinaLinux:/# tt /spec/storage/seq [DEBUG]: ---enter init_entry [DEBUG]: --before bind [ERROR]: bind socket fail [ERROR]: socket init fail [ERROR]: (dragonmat_init-289): init entry of socket_db failed ============================ tasks list ============================ /spec/storage/seq ============================ end ============================ ------------------- INFO ------------------- fast mode: false async mode: ddr total size: 1021656 KB cpu policy: performance flash device: overlayfs:/overlay flash device fs: ubifs flash device size: 176576 KB flash device free: 49176 KB test directory: /mnt/UDISK test file size: 45056 KB test block size: 4096 KB test times for average: 3 ------------------- END ------------------- filling ... OK (3584KB in 2s) =========== the 1 times =========== clear cache sync real 0m 0.04s user 0m 0.00s sys 0m 0.01s [ 189.972171] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:03:12 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 2358 2672 iozone test complete. clear cache sync real 0m 0.07s user 0m 0.00s sys 0m 0.02s [ 228.738321] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:03:50 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 4951 599763 iozone test complete. =========== the 2 times =========== clear cache sync real 0m 0.04s user 0m 0.01s sys 0m 0.00s [ 240.340556] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:04:02 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 2752 2643 iozone test complete. clear cache sync real 0m 0.04s user 0m 0.00s sys 0m 0.01s [ 276.075574] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:04:38 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 4994 609400 iozone test complete. =========== the 3 times =========== clear cache sync real 0m 0.04s user 0m 0.00s sys 0m 0.01s [ 287.598598] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:04:49 1970 Setting no_unlink Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 0 -w -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 2720 2630 iozone test complete. clear cache sync real 0m 0.10s user 0m 0.00s sys 0m 0.03s [ 323.735964] spec-seq.sh (658): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 08:05:25 1970 Auto Mode SYNC Mode. Include fsync in write timing Read & Write sync mode active. File size set to 45056 kB Record Size 4096 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -i 1 -a -o -e -+r -s 45056k -r 4096k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 45056 4096 4948 604526 iozone test complete. ------------------- SEQ SPEED ------------------- seq read: 4964 KB/s seq write: 2610 KB/s ------------------- end ------------------- ---------------------------- /spec/storage/seq ---------------------------- * task path : /spec/storage/seq * task command : spec-seq.sh * run times(real/max) : 1/1 * run parallel : no * run alone : no * may reboot : no * run once time limit : 30758400s * run time limit : 30758400s * timeout with : pass * exit once failed : no * real-time log: yes * begin date : Thu Jan 1 08:03:05 1970 * end date : Thu Jan 1 08:05:37 1970 * result : * num pid pgid return begin end note * 0 657 656 0 00:03:05 00:05:37 * task resource : * user cpu time = 9.25 * system cpu time = 103.770 * maximum resident size = 11028kB * page faults break times (without I/O) = 50224 * page faults break times (with I/O) = 57 * input times = 0 * output times = 0 * wait resource actively times = 168110 * wait resource passively times = 1460900 * run log: real_time_log was set, None! ---------------------------- end ---------------------------- ======================== Testcase Information ======================== </spec/storage/seq>: seq read: 4964 KB/s seq write: 2610 KB/s [ 359.764953] [BH_WRN] miss interrupt! ============================ tasks result ============================ /spec/storage/seq - YES11、SPI-Nand随机写/读
SPI-Nand随机写：>=120iops(四线)
先切换到性能模式：
echo "performance" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor再执行测试命令 ：
tt /spec/storage/rand结果如下：
root@TinaLinux:/# tt /spec/storage/rand [DEBUG]: ---enter init_entry [DEBUG]: --before bind [ERROR]: bind socket fail [ERROR]: socket init fail [ERROR]: (dragonmat_init-289): init entry of socket_db failed ============================ tasks list ============================ /spec/storage/rand ============================ end ============================ ------------------- INFO ------------------- fast mode: true async mode: ddr total size: 1021656 KB cpu policy: performance flash device: overlayfs:/overlay flash device fs: ubifs flash device size: 176576 KB flash device free: 175568 KB test directory: /mnt/UDISK test file size: 166788 KB test block size: 4 KB test times for average: 3 ------------------- END ------------------- initializing ..... OK (166788KB in 124s) =========== the 1 times =========== clear cache real 0m 0.04s user 0m 0.00s sys 0m 0.01s [ 3650.078789] spec-rand.sh (810): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:00:52 1970 Auto Mode Setting no_unlink SYNC Mode. Read & Write sync mode active. File size set to 166788 kB Record Size 4 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -a -w -i 2 -o -+r -s 166788k -r 4k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 166788 4 3054 1058 iozone test complete. =========== the 2 times =========== clear cache real 0m 0.27s user 0m 0.00s sys 0m 0.10s [ 3866.126220] spec-rand.sh (810): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:04:28 1970 Auto Mode Setting no_unlink SYNC Mode. Read & Write sync mode active. File size set to 166788 kB Record Size 4 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -a -w -i 2 -o -+r -s 166788k -r 4k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 166788 4 3533 1798 iozone test complete. =========== the 3 times =========== clear cache real 0m 0.31s user 0m 0.00s sys 0m 0.12s [ 4009.745178] spec-rand.sh (810): drop_caches: 3 Iozone: Performance Test of File I/O Version $Revision: 3.489 $ Compiled for 64 bit mode. Build: linux Contributors:William Norcott, Don Capps, Isom Crawford, Kirby Collins Al Slater, Scott Rhine, Mike Wisner, Ken Goss Steve Landherr, Brad Smith, Mark Kelly, Dr. Alain CYR, Randy Dunlap, Mark Montague, Dan Million, Gavin Brebner, Jean-Marc Zucconi, Jeff Blomberg, Benny Halevy, Dave Boone, Erik Habbinga, Kris Strecker, Walter Wong, Joshua Root, Fabrice Bacchella, Zhenghua Xue, Qin Li, Darren Sawyer, Vangel Bojaxhi, Ben England, Vikentsi Lapa, Alexey Skidanov, Sudhir Kumar. Run began: Thu Jan 1 09:06:51 1970 Auto Mode Setting no_unlink SYNC Mode. Read & Write sync mode active. File size set to 166788 kB Record Size 4 kB Dedup+compress enabled Dedup activated 50 percent. Zero Percent 50 Command line used: iozone -a -w -i 2 -o -+r -s 166788k -r 4k -f /mnt/UDISK/iozone.tmp -+M -+w 50 -+a 50 Output is in kBytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 kBytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 166788 4 3573 1819 iozone test complete. ------------------- RAND SPEED ------------------- random read: 3386 KB/s random write: 1558 KB/s random read iops: 846 random write iops: 389 ------------------- end ------------------- ---------------------------- /spec/storage/rand ---------------------------- * task path : /spec/storage/rand * task command : spec-rand.sh * run times(real/max) : 1/1 * run parallel : no * run alone : no * may reboot : no * run once time limit : 30758400s * run time limit : 30758400s * timeout with : pass * exit once failed : no * real-time log: yes * begin date : Thu Jan 1 08:58:42 1970 * end date : Thu Jan 1 09:09:11 1970 * result : * num pid pgid return begin end note * 0 809 808 0 00:58:42 01:09:11 * task resource : * user cpu time = 20.769 * system cpu time = 363.649 * maximum resident size = 11032kB * page faults break times (without I/O) = 43552 * page faults break times (with I/O) = 27 * input times = 0 * output times = 0 * wait resource actively times = 688130 * wait resource passively times = 5592580 * run log: real_time_log was set, None! ---------------------------- end ---------------------------- ======================== Testcase Information ======================== </spec/storage/rand>: random read: 3386 KB/s random write: 1558 KB/s random read iops: 846 random write iops: 389 ============================ tasks result ============================ /spec/storage/rand - YES ============================ end ============================12、TF卡
支持最大128G TF卡，支持热拔插，提供命令查看储存情况。
插了卡的情况下执行：
cat /proc/partitions结果如下：
root@TinaLinux:/# cat /proc/partitions major minor #blocks name 31 0 1024 mtdblock0 31 1 4096 mtdblock1 31 2 1024 mtdblock2 31 3 256000 mtdblock3 254 0 20412 ubiblock0_5 179 0 31205376 mmcblk0 179 1 4032 mmcblk0p1 179 2 252 mmcblk0p2 179 3 252 mmcblk0p3 179 4 10332 mmcblk0p4 179 5 20412 mmcblk0p5 179 6 504 mmcblk0p6 179 7 14112 mmcblk0p7 259 0 31133724 mmcblk0p8取mmcblk0前的数字，例如31205376 KB,换算得31.1G，往上取整，即为32G卡。
-
Referenced by
q1215200171 -
Referenced by q1215200171
Copyright © 2023 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号