D1哪吒PhoenixSuit烧录问题

[bill_j]

拿板第一天，搭好了环境，编完固件想刷进去试试，在开机状态下能够正常识别USB，然后按文档描述 reboot efex，设备重启，phoenixSuit界面显示未检测到设备接入电脑，按住FEL上电，效果一样。老板们帮忙看看。

图片传不动，只能搞一小段log

[02.160]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[02.376]Loading Environment from SUNXI_FLASH... OK
[02.410]Item0 (Map) magic is bad
[02.413]usb burn from boot
delay time 0
weak:otg_phy_config
[02.424]usb prepare ok
[02.630]usb sof ok
[02.632]usb probe ok
[02.634]usb setup ok
set address 0x2c
set address 0x2c ok
[05.639]do_burn_from_boot usb : have no handshake
]HELLO! BOOT0 is starting!
[48]BOOT0 commit : 2337244-dirty

[Kirin]

@bill_j 看log设备是正常的，大概率是电脑没有装全志USB驱动，详见：https://d1.docs.allwinnertech.com/source/2_gettools/#usb

[bill_j]

@kirin 确实是驱动没有安装，已解决！谢谢！