D1 PhoenixSuit烧录问题

[bill_j]

下载失败，从官网下载HDMI测试固件下载失败，我自己从官方SDK编出来的uart0固件也下载失败。
PhoenixSuit提示“烧写固件失败！请确保固件文件有效并且只能设备可以正常工作！”

[34.857]Volume attaching information dump:
[34.861] vol_id 1
[34.863] highest_lnum 5
[34.866] leb_count 3
[34.868] compat 0
[34.870] vol_type 3
[34.873] used_ebs 0
[34.875] last_data_size 0
[34.877] data_pad 0
Volume information dump:
vol_id 1
reserved_pebs 1
alignment 1
data_pad 0
vol_type 3
name_len 13
usable_leb_size 258048
used_ebs 1
used_bytes 258048
last_eb_bytes 258048
corrupted 0
upd_marker 0
name boot-resource
[34.909]ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22
[34.915]UBI error: cannot attach mtd4
[34.919]UBI error: cannot initialize UBI, error -22
UBI init error 22
Please check, if the correct MTD partition is used (size big enough?)
[34.931]ubi part sys err !
[34.933]initialize sunxi spinand ubi failed
download_standard_gpt:write mbr sectors fail ret = 0

[Kirin]

@bill_j 你的板子是1G版本还是2G版本？

[Kirin]

@bill_j 烧写的时候选择“全盘擦除”试试

[bill_j]

@kirin 板子是1G的，搞成全面擦除OK了！