a1314258 发布的帖子

@a1314258
同样的方法使用在r329的key_burn.c
编译成功了，无语

@mengxp 在 全志SecureBoot无法正常启用 中说：

efuse_read

请教一下,我是这样在key_burn.c加的

#include <common.h>
#include <command.h>
#include <sys_config.h>
#include <securestorage.h>
#include <private_uboot.h>
#include <smc.h>
#include <efuse_map.h>
#include <sunxi_board.h>

int do_efuse_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	char *efuse_name;
	char buffer[32];
	int  ret;

	if(argc != 2)
	{
		printf("the efuse item name is empty\n");

		return -1;
	}
	efuse_name = argv[1];
	printf("try to read %s\n", efuse_name);
	memset(buffer, 0, 32);
	//change
	//printf("buffer addr=0x%x\n", (u32)buffer);
	printf("buffer addr=0x\n");
	ret = arm_svc_efuse_read(efuse_name, buffer);
	if(ret)
	{
		printf("read efuse key [%s] failed\n", efuse_name);
	}
	else
	{
		printf("read efuse key [%s] successed\n", efuse_name);
		sunxi_dump(buffer, 32);
	}

	return 0;
}

U_BOOT_CMD(
	efuse_read, 3, 0, do_efuse_read,
	"read efuse key",
	"usage: efuse_read efusename"
);

muboot 编译失败了。

./../tools/toolchain/riscv64-linux-x86_64-20200528/bin/riscv64-unknown-linux-gnu-ld.bfd: board/sunxi/built-in.o: in function `do_efuse_read':
/home/user/tina-d1-h/lichee/brandy-2.0/u-boot-2018/board/sunxi/key_burn.c:96: undefined reference to `arm_svc_efuse_read'
Makefile:1480: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1
muboot stop for build error in brandy, Please check!

@tevet

[37.465]workmode = 16,storage type = 0
try card 0
set card number 0
get card number 0
[37.473][mmc]: mmc driver ver uboot2018:2021-11-19 15:38:00
[37.481][mmc]: get sdc_type fail and use default host:tm1.
[37.507][mmc]: can't find node "mmc0",will add new node
[37.512][mmc]: fdt err returned <no error>
[37.516][mmc]: Using default timing para
[37.519][mmc]: SUNXI SDMMC Controller Version:0x50310
[37.537][mmc]: card_caps:0x3000000a
[37.540][mmc]: host_caps:0x3000003f
[37.548]Loading Environment from SUNXI_FLASH... OK
[37.559]try to burn key
[37.562]out of usb burn from boot: not need burn key
[37.566]Net:   [37.568]No ethernet found.
Hit any key to stop autoboot:  0
sunxi work mode=0x10
run usb efex
delay time 2500
weak:otg_phy_config
usb init ok
set address 0x1d
set address 0x1d ok

卡在 set address 0x1d ok 这里就不动了。

@yuzukitsuru
tina_d1-h-nezha_uart0.img 用 PhoenixCard 成功

tina_d1-h-nezha_uart0_secure_v0.img 失败了，reset之后串口什么都没显示

@yuzukitsuru
再送佛送到西吧。怎么把这种固件写到的d1的sd卡里面？尝试了 因为喜欢用ADB，因为不喜欢插拔TF卡，所以D1直接用PhoenixSuit烧录TF(SDNAND) 没有成功

@yuzukitsuru
works like a charm.
Danke

请问解决了吗？我也想试一下d1的安全启动。

打包普通的可以，pack -s失败。

sboot bin=/home/user/tina-d1-h/out/d1-h-nezha/image/sboot.bin
file /home/user/tina-d1-h/out/d1-h-nezha/image/sboot.bin cant be open to calc hash
dragoncreate_toc0_certif err in calchash
create cert failed
ERROR: dragon toc0 run error

并没有发现有sboot.bin文件。