@lovexulu hey lovexulu, thanks for the information. I'm looking to learn exactly how to do what you describe, so thanks for pointing me in the right direction.

someone has shared with me some st7789 display driver code
https://github.com/MiyooCFW/kernel/blob/master/drivers/video/fbdev/st7789sfb.c
this comes from the miyoo 游戏机 that also uses f1c100s

so maybe if I drop this st7789sfb.c file in
licheenano/licheepi-nano-lcd/buildroot/dl/linux/git/drivers/video/fbdev/

and then make buildroot it'll bring it in? or do I need to explicitly declare the file somewhere?

more information about using this display with miyoo cfw:
https://github.com/MiyooCFW/kernel/blob/master/Documentation/devicetree/bindings/display/panel/sitronix%2Cst7789v.txt

@lovexulu hey lovexulu, thanks for the information. I'm looking to learn exactly how to do what you describe, so thanks for pointing me in the right direction.

someone has shared with me some st7789 display driver code
https://github.com/MiyooCFW/kernel/blob/master/drivers/video/fbdev/st7789sfb.c
this comes from the miyoo 游戏机 that also uses f1c100s

so maybe if I drop this st7789sfb.c file in
licheenano/licheepi-nano-lcd/buildroot/dl/linux/git/drivers/video/fbdev/

and then make buildroot it'll bring it in? or do I need to explicitly declare the file somewhere?

more information about using this display with miyoo cfw:
https://github.com/MiyooCFW/kernel/blob/master/Documentation/devicetree/bindings/display/panel/sitronix%2Cst7789v.txt

@steward 真棒， here's the information regarding the LCD pinout:

大家好。 我是一个外国人，对不起我中文一点不好

我买 lichee pi nano (f1c100s), 用这个 buildroot https://github.com/mclewell/licheepi-nano-lcd

here is the display I am using:

now, when I power on the system, nothing appears on the display

what should I do to use this LCD display on the lichee pi nano?
I want to create a 游戏机 using this 麦当劳 outer shell:

I am a big fan of allwinner arm soc, they are very power efficient and cost effective
总功耗极低，效率高
https://jaycarlson.net/embedded-linux/#1602627646108-72e75a29-4918

please help me figure out how to connect this 40-pin LCD to my lichee pi nano board. it can use SPI or MCU/CPU

thank you very much for your help!
bankbank