有没有 芯片 寄存器的参考 或者后续 有没有封装库函数的打算
，
还挺期待，这个裸机跑起控制算法 能起飞
BedRock 发布的帖子
-
【加精】在Ubuntu21.04中编译Tina SDKV1.01 版本 踩坑记录发布在 D1系列-RISC-V
前言
本人使用Ubuntu21.04，是在Ubuntu18.04 使用系统升级的方法升级，并非直接安装Ubuntu21.04 系统镜像。希望参考该帖开发者注意。
安装环境提醒
再Ubuntu更新软件包同时，个人不推荐使用清华源，可能会出现一些软件包安装找不到的问题（因为我之前就是），后面改为阿里源，然后就没有出现过软件包依赖的相关问题。切换软件源请自行百度参考帖子。
安装过程踩坑记录
参考全志官方文档：https://d1.docs.allwinnertech.com/study/study_2getsdk/
1、安装软件包问题
sudo apt-get install build-essential subversion git-core libncurses5-dev zlib1g-dev gawk flex quilt libssl-dev xsltproc libxml-parser-perl mercurial bzr ecj cvs unzip lib32z1 lib32z1-dev lib32stdc++6 libstdc++6 -y在软件包安装的时候 建议取消后面
-y选项 ,先看一下有没有自动卸载一些包 如果有建议取消安装，然后一个一个包安装。
如果出现软件包找不到的情况，请自行使用Tab补齐命令查看可以安装的包，并选择何时的包进行安装。
针对于32位的软件包sudo apt-get install libc6:i386 libstdc++6:i386 lib32ncurses5 lib32z1更有可能出现找不到的情况，依然使用
Tab补齐命令，查看当前可以安装的包，并选择何时的包进行安装。2、编译问题
依然参考官方文档：https://d1.docs.allwinnertech.com/study/study_4compile/
source 环境变量如果有错，请检查文件夹权限，将文件夹权限由root用户更改为普通用户。
如果还有问题，请根据具体信息对照envsetup.sh文件中的envsetup函数。一一落实执行过程。
3、make过程中遇到的问题
问题一
报错提示没有记录，查看报错提示，可以定位到 两处文件，修改其源码为：
#gdbusmessage.c文件，路径为：./out/d1-nezha/compile_dir/target/host/glib-2.50.1/gio/gdbusmessage.c gdbusmessage.c:2698:30: if (signature_str) tupled_signature_str = g_strdup_printf ("(%s)", signature_str); #这个文件路径还请自行查找 dbusauth.c 1298 if (line == NULL) goto out; debug_print ("SERVER: WaitingForBegin, read '%s'", line);问题二
rm: cannot remove '/home/jie/allwinner/tina-d1-open/tmp/info/.overrides-packageinfo-1859194': Permission denied make[3]: *** No rule to make target '/home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo-1861882'. Stop. cat: /home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo-1861882: No such file or directory cat: /home/jie/allwinner/tina-d1-open/tmp/info/.overrides-packageinfo-1861882: No such file or directory rm: cannot remove '/home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo.stamp.4ecc855bd5022757c3b7544e2dfb29c7': Permission denied touch: cannot touch '/home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo.stamp.d41d8cd98f00b204e9800998ecf8427e': Permission denied touch: cannot touch '/home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo.stamp': Permission denied make[2]: *** [build/scan.mk:84: /home/jie/allwinner/tina-d1-open/tmp/info/.files-packageinfo.stamp] Error 1 make[1]: *** [/home/jie/allwinner/tina-d1-open/build/toplevel.mk:84: prepare-tmpinfo] Error 2 make: *** [/home/jie/allwinner/tina-d1-open/build/toplevel.mk:304：world] 错误 2 [2]+ 已完成 $T/tools/build/buildserver --path $T #### make failed to build some targets (1 seconds) ####这个主要是文件夹及文件权限问题，给这几个文件及它的文件夹777权限。
基本是tmp文件夹的相关属性。问题三
strerror-sym.c:47:9: error: 'errnos_msgstr' undeclared (first use in this function) return errnos_msgstr + errnos_msgidx[idx]; ^~~~~~~~~~~~~ strerror-sym.c:47:9: note: each undeclared identifier is reported only once for eac h function it appears in strerror-sym.c:47:25: error: 'errnos_msgidx' undeclared (first use in this function ) return errnos_msgstr + errnos_msgidx[idx]; ^~~~~~~~~~~~~ make[7]: *** [Makefile:946: gpg_error-strerror-sym.o] Error 1通过查找文件定位
./out/d1-nezha/compile_dir/target/libgpg-error-1.27/src/errnos-sym.h这个文件为空
编译不通过 ， 相关变量没有定义
感谢全志官方群大佬的鼎力相助发了我一手头文件
这是缺少头文件中的内容/* Output of mkstrtable.awk. DO NOT EDIT. */ /* errnos.in - List of system error values. Copyright (C) 2003, 2004 g10 Code GmbH This file is part of libgpg-error. libgpg-error is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. libgpg-error is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with libgpg-error; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* The purpose of this complex string table is to produce optimal code with a minimum of relocations. */ static const char errnos_msgstr[] = "GPG_ERR_E2BIG" "\0" "GPG_ERR_EACCES" "\0" "GPG_ERR_EADDRINUSE" "\0" "GPG_ERR_EADDRNOTAVAIL" "\0" "GPG_ERR_EADV" "\0" "GPG_ERR_EAFNOSUPPORT" "\0" "GPG_ERR_EAGAIN" "\0" "GPG_ERR_EALREADY" "\0" "GPG_ERR_EAUTH" "\0" "GPG_ERR_EBACKGROUND" "\0" "GPG_ERR_EBADE" "\0" "GPG_ERR_EBADF" "\0" "GPG_ERR_EBADFD" "\0" "GPG_ERR_EBADMSG" "\0" "GPG_ERR_EBADR" "\0" "GPG_ERR_EBADRPC" "\0" "GPG_ERR_EBADRQC" "\0" "GPG_ERR_EBADSLT" "\0" "GPG_ERR_EBFONT" "\0" "GPG_ERR_EBUSY" "\0" "GPG_ERR_ECANCELED" "\0" "GPG_ERR_ECHILD" "\0" "GPG_ERR_ECHRNG" "\0" "GPG_ERR_ECOMM" "\0" "GPG_ERR_ECONNABORTED" "\0" "GPG_ERR_ECONNREFUSED" "\0" "GPG_ERR_ECONNRESET" "\0" "GPG_ERR_ED" "\0" "GPG_ERR_EDEADLK" "\0" "GPG_ERR_EDEADLOCK" "\0" "GPG_ERR_EDESTADDRREQ" "\0" "GPG_ERR_EDIED" "\0" "GPG_ERR_EDOM" "\0" "GPG_ERR_EDOTDOT" "\0" "GPG_ERR_EDQUOT" "\0" "GPG_ERR_EEXIST" "\0" "GPG_ERR_EFAULT" "\0" "GPG_ERR_EFBIG" "\0" "GPG_ERR_EFTYPE" "\0" "GPG_ERR_EGRATUITOUS" "\0" "GPG_ERR_EGREGIOUS" "\0" "GPG_ERR_EHOSTDOWN" "\0" "GPG_ERR_EHOSTUNREACH" "\0" "GPG_ERR_EIDRM" "\0" "GPG_ERR_EIEIO" "\0" "GPG_ERR_EILSEQ" "\0" "GPG_ERR_EINPROGRESS" "\0" "GPG_ERR_EINTR" "\0" "GPG_ERR_EINVAL" "\0" "GPG_ERR_EIO" "\0" "GPG_ERR_EISCONN" "\0" "GPG_ERR_EISDIR" "\0" "GPG_ERR_EISNAM" "\0" "GPG_ERR_EL2HLT" "\0" "GPG_ERR_EL2NSYNC" "\0" "GPG_ERR_EL3HLT" "\0" "GPG_ERR_EL3RST" "\0" "GPG_ERR_ELIBACC" "\0" "GPG_ERR_ELIBBAD" "\0" "GPG_ERR_ELIBEXEC" "\0" "GPG_ERR_ELIBMAX" "\0" "GPG_ERR_ELIBSCN" "\0" "GPG_ERR_ELNRNG" "\0" "GPG_ERR_ELOOP" "\0" "GPG_ERR_EMEDIUMTYPE" "\0" "GPG_ERR_EMFILE" "\0" "GPG_ERR_EMLINK" "\0" "GPG_ERR_EMSGSIZE" "\0" "GPG_ERR_EMULTIHOP" "\0" "GPG_ERR_ENAMETOOLONG" "\0" "GPG_ERR_ENAVAIL" "\0" "GPG_ERR_ENEEDAUTH" "\0" "GPG_ERR_ENETDOWN" "\0" "GPG_ERR_ENETRESET" "\0" "GPG_ERR_ENETUNREACH" "\0" "GPG_ERR_ENFILE" "\0" "GPG_ERR_ENOANO" "\0" "GPG_ERR_ENOBUFS" "\0" "GPG_ERR_ENOCSI" "\0" "GPG_ERR_ENODATA" "\0" "GPG_ERR_ENODEV" "\0" "GPG_ERR_ENOENT" "\0" "GPG_ERR_ENOEXEC" "\0" "GPG_ERR_ENOLCK" "\0" "GPG_ERR_ENOLINK" "\0" "GPG_ERR_ENOMEDIUM" "\0" "GPG_ERR_ENOMEM" "\0" "GPG_ERR_ENOMSG" "\0" "GPG_ERR_ENONET" "\0" "GPG_ERR_ENOPKG" "\0" "GPG_ERR_ENOPROTOOPT" "\0" "GPG_ERR_ENOSPC" "\0" "GPG_ERR_ENOSR" "\0" "GPG_ERR_ENOSTR" "\0" "GPG_ERR_ENOSYS" "\0" "GPG_ERR_ENOTBLK" "\0" "GPG_ERR_ENOTCONN" "\0" "GPG_ERR_ENOTDIR" "\0" "GPG_ERR_ENOTEMPTY" "\0" "GPG_ERR_ENOTNAM" "\0" "GPG_ERR_ENOTSOCK" "\0" "GPG_ERR_ENOTSUP" "\0" "GPG_ERR_ENOTTY" "\0" "GPG_ERR_ENOTUNIQ" "\0" "GPG_ERR_ENXIO" "\0" "GPG_ERR_EOPNOTSUPP" "\0" "GPG_ERR_EOVERFLOW" "\0" "GPG_ERR_EPERM" "\0" "GPG_ERR_EPFNOSUPPORT" "\0" "GPG_ERR_EPIPE" "\0" "GPG_ERR_EPROCLIM" "\0" "GPG_ERR_EPROCUNAVAIL" "\0" "GPG_ERR_EPROGMISMATCH" "\0" "GPG_ERR_EPROGUNAVAIL" "\0" "GPG_ERR_EPROTO" "\0" "GPG_ERR_EPROTONOSUPPORT" "\0" "GPG_ERR_EPROTOTYPE" "\0" "GPG_ERR_ERANGE" "\0" "GPG_ERR_EREMCHG" "\0" "GPG_ERR_EREMOTE" "\0" "GPG_ERR_EREMOTEIO" "\0" "GPG_ERR_ERESTART" "\0" "GPG_ERR_EROFS" "\0" "GPG_ERR_ERPCMISMATCH" "\0" "GPG_ERR_ESHUTDOWN" "\0" "GPG_ERR_ESOCKTNOSUPPORT" "\0" "GPG_ERR_ESPIPE" "\0" "GPG_ERR_ESRCH" "\0" "GPG_ERR_ESRMNT" "\0" "GPG_ERR_ESTALE" "\0" "GPG_ERR_ESTRPIPE" "\0" "GPG_ERR_ETIME" "\0" "GPG_ERR_ETIMEDOUT" "\0" "GPG_ERR_ETOOMANYREFS" "\0" "GPG_ERR_ETXTBSY" "\0" "GPG_ERR_EUCLEAN" "\0" "GPG_ERR_EUNATCH" "\0" "GPG_ERR_EUSERS" "\0" "GPG_ERR_EWOULDBLOCK" "\0" "GPG_ERR_EXDEV" "\0" "GPG_ERR_EXFULL"; static const int errnos_msgidx[] = { 0, 14, 29, 48, 70, 83, 104, 119, 136, 150, 170, 184, 198, 213, 229, 243, 259, 275, 291, 306, 320, 338, 353, 368, 382, 403, 424, 443, 454, 470, 488, 509, 523, 536, 552, 567, 582, 597, 611, 626, 646, 664, 682, 703, 717, 731, 746, 766, 780, 795, 807, 823, 838, 853, 868, 885, 900, 915, 931, 947, 964, 980, 996, 1011, 1025, 1045, 1060, 1075, 1092, 1110, 1131, 1147, 1165, 1182, 1200, 1220, 1235, 1250, 1266, 1281, 1297, 1312, 1327, 1343, 1358, 1374, 1392, 1407, 1422, 1437, 1452, 1472, 1487, 1501, 1516, 1531, 1547, 1564, 1580, 1598, 1614, 1631, 1647, 1662, 1679, 1693, 1712, 1730, 1744, 1765, 1779, 1796, 1817, 1839, 1860, 1875, 1899, 1918, 1933, 1949, 1965, 1983, 2000, 2014, 2035, 2053, 2077, 2092, 2106, 2121, 2136, 2153, 2167, 2185, 2206, 2222, 2238, 2254, 2269, 2289, 2303, }; static GPG_ERR_INLINE int errnos_msgidxof (int code) { return (0 ? 0 : ((code >= 0) && (code <= 140)) ? (code - 0) : -1); }谨此，更改之后，D1 SDK 编译通过。 非常感谢官方群 大佬们的帮助！
#### make completed successfully (15:51 (mm:ss)) ####嘻嘻！
-
回复: D1 SDK V1.01 固件在编译的过程中遇到的问题发布在 D1系列-RISC-V
再次记录，在编译过程中会出现/tmp 文件删除不掉的情况 需要将tmp文件夹整体 给予777权限 确保make 可以删除 该文件夹和文件夹中的文件
有来自于 tmp 的权限不足不能操作的问题 将文件夹所有的权限修改为 777
-
回复: D1 SDK V1.01 固件在编译的过程中遇到的问题发布在 D1系列-RISC-V
@xiaowenge 修改了两处源码 记录需要注意一下 分别是
gdbusmessage.c:2698:30: if (signature_str) tupled_signature_str = g_strdup_printf ("(%s)", signature_str); dbusauth.c 1298 if (line == NULL) goto out; debug_print ("SERVER: WaitingForBegin, read '%s'", line);
-
回复: D1 SDK V1.01 固件在编译的过程中遇到的问题发布在 D1系列-RISC-V
checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for x86_64-linux-gnu-objdump... x86_64-linux-gnu-objdump checking how to recognize dependent libraries... pass_all checking for x86_64-linux-gnu-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for x86_64-linux-gnu-ar... x86_64-linux-gnu-ar checking for archiver @FILE support... @ checking for x86_64-linux-gnu-strip... x86_64-linux-gnu-strip checking for x86_64-linux-gnu-ranlib... x86_64-linux-gnu-ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for x86_64-linux-gnu-mt... no checking for mt... mt checking if mt is a manifest tool... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for shl_load... no checking for shl_load in -ldld... no checking for dlopen... no checking for dlopen in -ldl... yes checking whether a program can dlopen itself... yes checking whether a statically linked program can dlopen itself... no checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking which extension is used for runtime loadable modules... .so checking which variable specifies run-time module search path... LD_LIBRARY_PATH checking for the default library search path... (cached) checking for library containing dlopen... -ldl checking for dlerror... yes checking for shl_load... (cached) no checking for shl_load in -ldld... (cached) no checking for dld_link in -ldld... no checking for _ prefix in compiled symbols... no checking whether deplibs are loaded by dlopen... yes checking for argz.h... yes checking for error_t... yes checking for argz_add... yes checking for argz_append... yes checking for argz_count... yes checking for argz_create_sep... yes checking for argz_insert... yes checking for argz_next... yes checking for argz_stringify... yes checking if argz actually works... yes checking whether libtool supports -dlopen/-dlpreopen... yes checking for unistd.h... (cached) yes checking for dl.h... no checking for sys/dl.h... no checking for dld.h... no checking for mach-o/dyld.h... no checking for dirent.h... yes checking for closedir... yes checking for opendir... yes checking for readdir... yes checking for strlcat... no checking for strlcpy... no checking for x86_64-linux-gnu-g++... x86_64-linux-gnu-g++ checking whether we are using the GNU C++ compiler... yes checking whether x86_64-linux-gnu-g++ accepts -g... yes checking dependency style of x86_64-linux-gnu-g++... gcc3 checking how to run the C++ preprocessor... x86_64-linux-gnu-g++ -E checking for ld used by x86_64-linux-gnu-g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the x86_64-linux-gnu-g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for x86_64-linux-gnu-g++ option to produce PIC... -fPIC -DPIC checking if x86_64-linux-gnu-g++ PIC flag -fPIC -DPIC works... yes checking if x86_64-linux-gnu-g++ static flag -static works... yes checking if x86_64-linux-gnu-g++ supports -c -o file.o... yes checking if x86_64-linux-gnu-g++ supports -c -o file.o... (cached) yes checking whether the x86_64-linux-gnu-g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for x86_64-linux-gnu-g77... no checking for x86_64-linux-gnu-xlf... no checking for x86_64-linux-gnu-f77... no checking for x86_64-linux-gnu-frt... no checking for x86_64-linux-gnu-pgf77... no checking for x86_64-linux-gnu-cf77... no checking for x86_64-linux-gnu-fort77... no checking for x86_64-linux-gnu-fl32... no checking for x86_64-linux-gnu-af77... no checking for x86_64-linux-gnu-xlf90... no checking for x86_64-linux-gnu-f90... no checking for x86_64-linux-gnu-pgf90... no checking for x86_64-linux-gnu-pghpf... no checking for x86_64-linux-gnu-epcf90... no checking for x86_64-linux-gnu-gfortran... x86_64-linux-gnu-gfortran checking whether we are using the GNU Fortran 77 compiler... yes checking whether x86_64-linux-gnu-gfortran accepts -g... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for x86_64-linux-gnu-gfortran option to produce PIC... -fPIC checking if x86_64-linux-gnu-gfortran PIC flag -fPIC works... yes checking if x86_64-linux-gnu-gfortran static flag -static works... yes checking if x86_64-linux-gnu-gfortran supports -c -o file.o... yes checking if x86_64-linux-gnu-gfortran supports -c -o file.o... (cached) yes checking whether the x86_64-linux-gnu-gfortran linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for x86_64-linux-gnu-gfortran... x86_64-linux-gnu-gfortran checking whether we are using the GNU Fortran compiler... yes checking whether x86_64-linux-gnu-gfortran accepts -g... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for x86_64-linux-gnu-gfortran option to produce PIC... -fPIC checking if x86_64-linux-gnu-gfortran PIC flag -fPIC works... yes checking if x86_64-linux-gnu-gfortran static flag -static works... yes checking if x86_64-linux-gnu-gfortran supports -c -o file.o... yes checking if x86_64-linux-gnu-gfortran supports -c -o file.o... (cached) yes checking whether the x86_64-linux-gnu-gfortran linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for x86_64-linux-gnu-gcj... no checking for gcj... no checking for x86_64-linux-gnu-windres... no checking for windres... no checking whether make supports order-only prerequisites... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands touch /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/.configured make --jobserver-auth=3,4 -j -C /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4 make[4]: warning: -j0 forced in submake: resetting jobserver mode. make[4]: Entering directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' rm -f libtoolize.tmp libtoolize set dummy `/usr/bin/env bash ./libltdl/config/mkstamp .`; shift; case 2.4 in *[acegikmoqsuwy]) TIMESTAMP=" $1 $2" ;; *) TIMESTAMP="" ;; esac; \ sed -e 's,@EGREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep -E,g' -e 's,@FGREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep -F,g' -e 's,@GREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep,g' -e 's,@LN_S\@,ln -s,g' -e 's,@MACRO_VERSION\@,2.4,g' -e 's,@PACKAGE\@,libtool,g' -e 's,@PACKAGE_BUGREPORT\@,bug-libtool@gnu.org,g' -e 's,@PACKAGE_URL\@,http://www.gnu.org/software/libtool/,g' -e 's,@PACKAGE_NAME\@,GNU Libtool,g' -e 's,@PACKAGE_STRING\@,GNU Libtool 2.4,g' -e 's,@PACKAGE_TARNAME\@,libtool,g' -e 's,@PACKAGE_VERSION\@,2.4,g' -e 's,@SED\@,/home/jie/allwinner/tina-d1-open/out/host/bin/sed,g' -e 's,@VERSION\@,2.4,g' -e 's,@aclocaldir\@,/home/jie/allwinner/tina-d1-open/out/host/share/aclocal,g' -e 's,@datadir\@,/home/jie/allwinner/tina-d1-open/out/host/share,g' -e 's,@pkgdatadir\@,/home/jie/allwinner/tina-d1-open/out/host/share/libtool,g' -e 's,@host_triplet\@,x86_64-pc-linux-gnu,g' -e 's,@prefix\@,/home/jie/allwinner/tina-d1-open/out/host,g' -e "s,@TIMESTAMP\@,$TIMESTAMP,g" \ -e 's,@aclocal_DATA\@,m4/argz.m4 m4/libtool.m4 m4/ltdl.m4 m4/ltoptions.m4 m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4,g' \ -e "s,@pkgltdl_files\@,libltdl/COPYING.LIB libltdl/README libltdl/Makefile.inc libltdl/Makefile.am libltdl/configure.ac libltdl/aclocal.m4 libltdl/Makefile.in libltdl/config-h.in libltdl/configure libltdl/argz_.h libltdl/argz.c libltdl/loaders/dld_link.c libltdl/loaders/dlopen.c libltdl/loaders/dyld.c libltdl/loaders/load_add_on.c libltdl/loaders/loadlibrary.c libltdl/loaders/shl_load.c libltdl/lt__dirent.c libltdl/lt__strl.c libltdl/libltdl/lt__alloc.h libltdl/libltdl/lt__dirent.h libltdl/libltdl/lt__glibc.h libltdl/libltdl/lt__private.h libltdl/libltdl/lt__strl.h libltdl/libltdl/lt_dlloader.h libltdl/libltdl/lt_error.h libltdl/libltdl/lt_system.h libltdl/libltdl/slist.h libltdl/loaders/preopen.c libltdl/lt__alloc.c libltdl/lt_dlloader.c libltdl/lt_error.c libltdl/ltdl.c libltdl/ltdl.h libltdl/slist.c,g" \ -e "s,@pkgconfig_files\@,config/compile config/config.guess config/config.sub config/depcomp config/install-sh config/missing config/ltmain.sh,g" \ ./libtoolize.in > libtoolize.tmp autom4te --language=m4sh -B libltdl/config libltdl/config/ltmain.m4sh > libltdl/config/ltmain.in chmod a+x libtoolize.tmp chmod a-w libtoolize.tmp mv -f libtoolize.tmp libtoolize sed -e s,@EGREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep -E,g -e s,@FGREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep -F,g -e s,@GREP\@,/home/jie/allwinner/tina-d1-open/out/host/bin/grep,g -e s,@LN_S\@,ln -s,g -e s,@MACRO_VERSION\@,2.4,g -e s,@PACKAGE\@,libtool,g -e s,@PACKAGE_BUGREPORT\@,bug-libtool@gnu.org,g -e s,@PACKAGE_URL\@,http://www.gnu.org/software/libtool/,g -e s,@PACKAGE_NAME\@,GNU Libtool,g -e s,@PACKAGE_STRING\@,GNU Libtool 2.4,g -e s,@PACKAGE_TARNAME\@,libtool,g -e s,@PACKAGE_VERSION\@,2.4,g -e s,@SED\@,/home/jie/allwinner/tina-d1-open/out/host/bin/sed,g -e s,@VERSION\@,2.4,g -e s,@aclocaldir\@,/home/jie/allwinner/tina-d1-open/out/host/share/aclocal,g -e s,@datadir\@,/home/jie/allwinner/tina-d1-open/out/host/share,g -e s,@pkgdatadir\@,/home/jie/allwinner/tina-d1-open/out/host/share/libtool,g -e s,@host_triplet\@,x86_64-pc-linux-gnu,g -e s,@prefix\@,/home/jie/allwinner/tina-d1-open/out/host,g -e s,@TIMESTAMP\@,,g -e s,@package_revision\@,1.3293, ./libltdl/config/ltmain.in > ./libltdl/config/ltmain.sh /usr/bin/env bash ./config.status libtool config.status: executing libtool commands make all-recursive make[5]: Entering directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' make[6]: Entering directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' depbase=`echo libltdl/lt__strl.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/lt__strl.lo -MD -MP -MF $depbase.Tpo -c -o libltdl/lt__strl.lo libltdl/lt__strl.c &&\ mv -f $depbase.Tpo $depbase.Plo PATH=.:$PATH; export PATH; /usr/bin/env bash /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/missing help2man --output=doc/libtool.1 --help-option=--help-all libtool PATH=.:$PATH; export PATH; /usr/bin/env bash /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/missing help2man --output=doc/libtoolize.1 libtoolize make[7]: Entering directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' cd ./libltdl && \ sed -e 's,config/mdate-sh,,' -e 's,config/texinfo.tex,,' \ -e 's,config/mkinstalldirs,,' \ < Makefile.in > Makefile.inT && \ mv -f Makefile.inT Makefile.in /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/libltdl_libltdl_la-preopen.lo -MD -MP -MF libltdl/loaders/.deps/libltdl_libltdl_la-preopen.Tpo -c -o libltdl/loaders/libltdl_libltdl_la-preopen.lo `test -f 'libltdl/loaders/preopen.c' || echo './'`libltdl/loaders/preopen.c /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt__alloc.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt__alloc.Tpo -c -o libltdl/libltdl_libltdl_la-lt__alloc.lo `test -f 'libltdl/lt__alloc.c' || echo './'`libltdl/lt__alloc.c /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_dlloader.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_dlloader.Tpo -c -o libltdl/libltdl_libltdl_la-lt_dlloader.lo `test -f 'libltdl/lt_dlloader.c' || echo './'`libltdl/lt_dlloader.c make[7]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_error.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_error.Tpo -c -o libltdl/libltdl_libltdl_la-lt_error.lo `test -f 'libltdl/lt_error.c' || echo './'`libltdl/lt_error.c echo stamp > libltdl/stamp-mk /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-ltdl.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-ltdl.Tpo -c -o libltdl/libltdl_libltdl_la-ltdl.lo `test -f 'libltdl/ltdl.c' || echo './'`libltdl/ltdl.c /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-slist.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-slist.Tpo -c -o libltdl/libltdl_libltdl_la-slist.lo `test -f 'libltdl/slist.c' || echo './'`libltdl/slist.c depbase=`echo libltdl/loaders/dlopen.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ /usr/bin/env bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLT_CONFIG_H='<config.h>' -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/dlopen.lo -MD -MP -MF $depbase.Tpo -c -o libltdl/loaders/dlopen.lo libltdl/loaders/dlopen.c &&\ mv -f $depbase.Tpo $depbase.Plo OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/lt__strl.lo -MD -MP -MF libltdl/.deps/lt__strl.Tpo -c libltdl/lt__strl.c -fPIC -DPIC -o libltdl/.libs/lt__strl.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt__alloc.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt__alloc.Tpo -c libltdl/lt__alloc.c -fPIC -DPIC -o libltdl/.libs/libltdl_libltdl_la-lt__alloc.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_error.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_error.Tpo -c libltdl/lt_error.c -fPIC -DPIC -o libltdl/.libs/libltdl_libltdl_la-lt_error.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_dlloader.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_dlloader.Tpo -c libltdl/lt_dlloader.c -fPIC -DPIC -o libltdl/.libs/libltdl_libltdl_la-lt_dlloader.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-slist.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-slist.Tpo -c libltdl/slist.c -fPIC -DPIC -o libltdl/.libs/libltdl_libltdl_la-slist.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/libltdl_libltdl_la-preopen.lo -MD -MP -MF libltdl/loaders/.deps/libltdl_libltdl_la-preopen.Tpo -c libltdl/loaders/preopen.c -fPIC -DPIC -o libltdl/loaders/.libs/libltdl_libltdl_la-preopen.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-ltdl.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-ltdl.Tpo -c libltdl/ltdl.c -fPIC -DPIC -o libltdl/.libs/libltdl_libltdl_la-ltdl.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/dlopen.lo -MD -MP -MF libltdl/loaders/.deps/dlopen.Tpo -c libltdl/loaders/dlopen.c -fPIC -DPIC -o libltdl/loaders/.libs/dlopen.o OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/lt__strl.lo -MD -MP -MF libltdl/.deps/lt__strl.Tpo -c libltdl/lt__strl.c -o libltdl/lt__strl.o >/dev/null 2>&1 OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt__alloc.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt__alloc.Tpo -c libltdl/lt__alloc.c -o libltdl/libltdl_libltdl_la-lt__alloc.o >/dev/null 2>&1 OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-slist.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-slist.Tpo -c libltdl/slist.c -o libltdl/libltdl_libltdl_la-slist.o >/dev/null 2>&1 OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/libltdl_libltdl_la-preopen.lo -MD -MP -MF libltdl/loaders/.deps/libltdl_libltdl_la-preopen.Tpo -c libltdl/loaders/preopen.c -o libltdl/loaders/libltdl_libltdl_la-preopen.o >/dev/null 2>&1 OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_error.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_error.Tpo -c libltdl/lt_error.c -o libltdl/libltdl_libltdl_la-lt_error.o >/dev/null 2>&1 OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-lt_dlloader.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-lt_dlloader.Tpo -c libltdl/lt_dlloader.c -o libltdl/libltdl_libltdl_la-lt_dlloader.o >/dev/null 2>&1 mv -f libltdl/.deps/libltdl_libltdl_la-lt__alloc.Tpo libltdl/.deps/libltdl_libltdl_la-lt__alloc.Plo OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/loaders/dlopen.lo -MD -MP -MF libltdl/loaders/.deps/dlopen.Tpo -c libltdl/loaders/dlopen.c -o libltdl/loaders/dlopen.o >/dev/null 2>&1 mv -f libltdl/loaders/.deps/libltdl_libltdl_la-preopen.Tpo libltdl/loaders/.deps/libltdl_libltdl_la-preopen.Plo mv -f libltdl/.deps/libltdl_libltdl_la-lt_dlloader.Tpo libltdl/.deps/libltdl_libltdl_la-lt_dlloader.Plo mv -f libltdl/.deps/libltdl_libltdl_la-lt_error.Tpo libltdl/.deps/libltdl_libltdl_la-lt_error.Plo mv -f libltdl/.deps/libltdl_libltdl_la-slist.Tpo libltdl/.deps/libltdl_libltdl_la-slist.Plo /usr/bin/env bash ./libtool --tag=CC --mode=link gcc -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -module -avoid-version -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib -o libltdl/dlopen.la libltdl/loaders/dlopen.lo -ldl -ldl OpenWrt-libtool: link: x86_64-linux-gnu-ar cru libltdl/.libs/dlopen.a libltdl/loaders/.libs/dlopen.o x86_64-linux-gnu-ar: `u' modifier ignored since `D' is the default (see `U') OpenWrt-libtool: link: x86_64-linux-gnu-ranlib libltdl/.libs/dlopen.a OpenWrt-libtool: link: ( cd "libltdl/.libs" && rm -f "dlopen.la" && ln -s "../dlopen.la" "dlopen.la" ) OpenWrt-libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLTDLOPEN=libltdl "-DLT_CONFIG_H=<config.h>" -DLTDL -I. -I. -Ilibltdl -I./libltdl -I./libltdl/libltdl -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -MT libltdl/libltdl_libltdl_la-ltdl.lo -MD -MP -MF libltdl/.deps/libltdl_libltdl_la-ltdl.Tpo -c libltdl/ltdl.c -o libltdl/libltdl_libltdl_la-ltdl.o >/dev/null 2>&1 mv -f libltdl/.deps/libltdl_libltdl_la-ltdl.Tpo libltdl/.deps/libltdl_libltdl_la-ltdl.Plo /usr/bin/env bash ./libtool --tag=CC --mode=link gcc -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include -no-undefined -version-info 10:0:3 -dlpreopen libltdl/dlopen.la -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib -o libltdl/libltdl.la -rpath /home/jie/allwinner/tina-d1-open/out/host/lib libltdl/loaders/libltdl_libltdl_la-preopen.lo libltdl/libltdl_libltdl_la-lt__alloc.lo libltdl/libltdl_libltdl_la-lt_dlloader.lo libltdl/libltdl_libltdl_la-lt_error.lo libltdl/libltdl_libltdl_la-ltdl.lo libltdl/libltdl_libltdl_la-slist.lo libltdl/lt__strl.lo -ldl OpenWrt-libtool: link: rm -f libltdl/.libs/libltdl.nm libltdl/.libs/libltdl.nmS libltdl/.libs/libltdl.nmT OpenWrt-libtool: link: (cd libltdl/.libs && gcc -O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -c -fno-builtin -fPIC -DPIC "libltdlS.c") OpenWrt-libtool: link: rm -f "libltdl/.libs/libltdlS.c" "libltdl/.libs/libltdl.nm" "libltdl/.libs/libltdl.nmS" "libltdl/.libs/libltdl.nmT" OpenWrt-libtool: link: (cd libltdl/.libs/libltdl.lax/dlopen.a && x86_64-linux-gnu-ar x "/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/.libs/dlopen.a") OpenWrt-libtool: link: gcc -shared -fPIC -DPIC libltdl/loaders/.libs/libltdl_libltdl_la-preopen.o libltdl/.libs/libltdl_libltdl_la-lt__alloc.o libltdl/.libs/libltdl_libltdl_la-lt_dlloader.o libltdl/.libs/libltdl_libltdl_la-lt_error.o libltdl/.libs/libltdl_libltdl_la-ltdl.o libltdl/.libs/libltdl_libltdl_la-slist.o libltdl/.libs/lt__strl.o libltdl/.libs/libltdlS.o libltdl/.libs/libltdl.lax/dlopen.a/dlopen.o -ldl -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib -O2 -Wl,-soname -Wl,libltdl.so.7 -o libltdl/.libs/libltdl.so.7.3.0 OpenWrt-libtool: link: (cd "libltdl/.libs" && rm -f "libltdl.so.7" && ln -s "libltdl.so.7.3.0" "libltdl.so.7") OpenWrt-libtool: link: (cd "libltdl/.libs" && rm -f "libltdl.so" && ln -s "libltdl.so.7.3.0" "libltdl.so") OpenWrt-libtool: link: (cd libltdl/.libs/libltdl.lax/lt1-dlopen.a && x86_64-linux-gnu-ar x "/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/.libs/dlopen.a") OpenWrt-libtool: link: x86_64-linux-gnu-ar cru libltdl/.libs/libltdl.a libltdl/loaders/libltdl_libltdl_la-preopen.o libltdl/libltdl_libltdl_la-lt__alloc.o libltdl/libltdl_libltdl_la-lt_dlloader.o libltdl/libltdl_libltdl_la-lt_error.o libltdl/libltdl_libltdl_la-ltdl.o libltdl/libltdl_libltdl_la-slist.o libltdl/lt__strl.o libltdl/.libs/libltdlS.o libltdl/.libs/libltdl.lax/lt1-dlopen.a/dlopen.o x86_64-linux-gnu-ar: `u' modifier ignored since `D' is the default (see `U') OpenWrt-libtool: link: x86_64-linux-gnu-ranlib libltdl/.libs/libltdl.a OpenWrt-libtool: link: rm -fr libltdl/.libs/libltdl.lax libltdl/.libs/libltdl.lax OpenWrt-libtool: link: ( cd "libltdl/.libs" && rm -f "libltdl.la" && ln -s "../libltdl.la" "libltdl.la" ) make[6]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' make[5]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' make[4]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4' touch /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/.built make[3]: Leaving directory '/home/jie/allwinner/tina-d1-open/tools/libtool' make[2]: Leaving directory '/home/jie/allwinner/tina-d1-open' make[1]: *** [tools/Makefile:133: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/staging_dir/target/stamp/.tools_install_yyyynyyynyyyyyyynnnyyyyyyyyyyynnyyyyyyyynyyynyyyyy] Error 2 make[1]: Leaving directory '/home/jie/allwinner/tina-d1-open' make: *** [/home/jie/allwinner/tina-d1-open/build/toplevel.mk:306：world] 错误 2 [2]+ 已完成 $T/tools/build/buildserver --path $T #### make failed to build some targets (05:43 (mm:ss)) ####
-
回复: D1 SDK V1.01 固件在编译的过程中遇到的问题发布在 D1系列-RISC-V
编译迷你固件出现了g++错误引起的这个问题导致后面的一系列文件找不到的问题，仔细看了一下下面的checking日志，是因为我的系统中关于X86_64_gnu 的一些 文件没有找到，这些需要安装吗还是过程中需要的工具。
g++: fatal error: Killed signal terminated program cc1plus compilation terminated. make[6]: *** [Source/CMakeFiles/CMakeLib.dir/build.make:2367: Source/CMakeFiles/CMakeLib.dir/cmQtAutoGeneratorInitializer.cxx.o] Error 1 make[6]: *** Waiting for unfinished jobs.... cc -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib fatlabel.o boot.o check.o common.o fat.o file.o io.o lfn.o charconv.o -o fatlabel cc -O2 -fomit-frame-pointer -D_GNU_SOURCE -Wall -Wextra -Wno-sign-compare -Wno-missing-field-initializers -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -g -c -o fsck.fat.o src/fsck.fat.c autoreconf: configure.ac: tracing cc -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib fsck.fat.o boot.o check.o common.o fat.o file.o io.o lfn.o charconv.o -o fsck.fat cc -O2 -fomit-frame-pointer -D_GNU_SOURCE -Wall -Wextra -Wno-sign-compare -Wno-missing-field-initializers -Wmissing-prototypes -Wstrict-prototypes -Wwrite-strings -g -c -o mkfs.fat.o src/mkfs.fat.c src/mkfs.fat.c: In function 'get_list_blocks': src/mkfs.fat.c:468:2: warning: ignoring return value of 'fscanf', declared with attribute warn_unused_result [-Wunused-result] 468 | fscanf(listfile, "%ld\n", &blockno); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force --ltdl libtoolize: Bootstrap detected, no files installed. cc -L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib mkfs.fat.o -o mkfs.fat make[4]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/dosfstools-3.0.27' touch /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/dosfstools-3.0.27/.built make[3]: Leaving directory '/home/jie/allwinner/tina-d1-open/tools/dosfstools' make[3]: Entering directory '/home/jie/allwinner/tina-d1-open/tools/dosfstools' install -m0755 /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/dosfstools-3.0.27/mkfs.fat /home/jie/allwinner/tina-d1-open/out/host/bin/ ln -sf mkfs.fat /home/jie/allwinner/tina-d1-open/out/host/bin/mkdosfs mkdir -p /home/jie/allwinner/tina-d1-open/out/host/stamp touch /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/dosfstools-3.0.27/.built touch /home/jie/allwinner/tina-d1-open/out/host/stamp/.dosfstools_installed make[3]: Leaving directory '/home/jie/allwinner/tina-d1-open/tools/dosfstools' autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoheader --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing make[6]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/cmake-3.4.3' make[5]: *** [CMakeFiles/Makefile2:1969: Source/CMakeFiles/CMakeLib.dir/all] Error 2 make[5]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/cmake-3.4.3' make[4]: *** [Makefile:161: all] Error 2 make[4]: Leaving directory '/home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/cmake-3.4.3' make[3]: *** [Makefile:29: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/cmake-3.4.3/.built] Error 2 make[3]: Leaving directory '/home/jie/allwinner/tina-d1-open/tools/cmake' make[2]: *** [tools/Makefile:135: tools/cmake/compile] Error 2 make[2]: *** Waiting for unfinished jobs.... parallel-tests: installing 'libltdl/config/test-driver' autoreconf: Leaving directory `.' autoreconf: Entering directory `libltdl' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force --ltdl libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoheader --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing Makefile.am:113: warning: source file 'loaders/dld_link.c' is in a subdirectory, Makefile.am:113: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Makefile.am:109: warning: source file 'loaders/dlopen.c' is in a subdirectory, Makefile.am:109: but option 'subdir-objects' is disabled Makefile.am:117: warning: source file 'loaders/dyld.c' is in a subdirectory, Makefile.am:117: but option 'subdir-objects' is disabled Makefile.am:67: warning: source file 'loaders/preopen.c' is in a subdirectory, Makefile.am:67: but option 'subdir-objects' is disabled Makefile.am:120: warning: source file 'loaders/load_add_on.c' is in a subdirectory, Makefile.am:120: but option 'subdir-objects' is disabled Makefile.am:123: warning: source file 'loaders/loadlibrary.c' is in a subdirectory, Makefile.am:123: but option 'subdir-objects' is disabled Makefile.am:126: warning: source file 'loaders/shl_load.c' is in a subdirectory, Makefile.am:126: but option 'subdir-objects' is disabled autoreconf: Leaving directory `libltdl' autoreconf: Entering directory `tests/cdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/cdemo' autoreconf: Entering directory `tests/demo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/demo' autoreconf: Entering directory `tests/depdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/depdemo' autoreconf: Entering directory `tests/f77demo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoheader --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/f77demo' autoreconf: Entering directory `tests/fcdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoheader --force autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/fcdemo' autoreconf: Entering directory `tests/mdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/mdemo' autoreconf: Entering directory `tests/mdemo2' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/mdemo2' autoreconf: Entering directory `tests/pdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/pdemo' autoreconf: Entering directory `tests/tagdemo' autoreconf: configure.ac: not using Gettext autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/aclocal --force -I ../../libltdl/m4 autoreconf: configure.ac: tracing autoreconf: running: /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/libltdl/config/libtoolize --copy --force libtoolize: Bootstrap detected, no files installed. autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/autoconf --force autoreconf: configure.ac: not using Autoheader autoreconf: running: /home/jie/allwinner/tina-d1-open/out/host/bin/automake --add-missing --copy --force-missing autoreconf: Leaving directory `tests/tagdemo' touch /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/.prepared7bf4eb5be4d59121ff49d9dae74bea63 (cd /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4/; if [ -x configure ]; then cp -fpR /home/jie/allwinner/tina-d1-open/scripts/config.{guess,sub} /home/jie/allwinner/tina-d1-open/out/d1-nezha_min/compile_dir/host/libtool-2.4// && bash ./configure CC="gcc" CFLAGS="-O2 -I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include " CPPFLAGS="-I/home/jie/allwinner/tina-d1-open/out/host/include -I/home/jie/allwinner/tina-d1-open/out/host/usr/include " LDFLAGS="-L/home/jie/allwinner/tina-d1-open/out/host/lib -L/home/jie/allwinner/tina-d1-open/out/host/usr/lib " SHELL="/usr/bin/env bash" lt_cv_sys_dlsearch_path="" --target=x86_64-linux-gnu --host=x86_64-linux-gnu --build=x86_64-linux-gnu --program-prefix="" --program-suffix="" --prefix=/home/jie/allwinner/tina-d1-open/out/host --exec-prefix=/home/jie/allwinner/tina-d1-open/out/host --sysconfdir=/home/jie/allwinner/tina-d1-open/out/host/etc --localstatedir=/home/jie/allwinner/tina-d1-open/out/host/var --sbindir=/home/jie/allwinner/tina-d1-open/out/host/bin ; fi ) ## ----------------------- ## ## Configuring libtool 2.4 ## ## ----------------------- ## checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu configure: autobuild project... GNU Libtool configure: autobuild revision... 2.4 () configure: autobuild hostname... jie-US-YYDS configure: autobuild mode... default configure: autobuild timestamp... 20210528T050916Z checking for x86_64-linux-gnu-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking how to print strings... printf checking for a sed that does not truncate output... /home/jie/allwinner/tina-d1-open/out/host/bin/sed checking for grep that handles long lines and -e... /home/jie/allwinner/tina-d1-open/out/host/bin/grep checking for egrep... /home/jie/allwinner/tina-d1-open/out/host/bin/grep -E checking for fgrep... /home/jie/allwinner/tina-d1-open/out/host/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
-
D1 SDK V1.01 固件在编译的过程中遇到的问题发布在 D1系列-RISC-V
编译D1 V1.01 固件的时候遇到了这个问题 说是由多个warning引起的errors
查看上面的 warning 提示感觉都没什么大问题， 主要还是在glib库中的问题
之前编译 使用多线程编译 会出现
这两个问题 那个动态库缺少不知道，下面这个问题与上面出错的文件也不一样，现在没有头绪。。。
