自己先顶一下，大家能帮忙看一下吗？
F
fengshulin 发布的帖子
-
(芒果派D1s)外部32.768K晶振不能用问题发布在 D1系列-RISC-V
调式RTC时，发现系统的默认时钟源是16M RC。修改寄存器LOSC_CTRL_REG（0x07090000）的BIT0位，将其设置成1，切换时钟源到外部32.768K晶振。重新读取该寄存器的值，修改未生效。怀疑外部32.768K晶振失效。于是读寄存器LOSC_AUTO_SWT_STA_REG（0x07090004），其值为：0x00000004。该寄存器的定义如下：
可以看到，外部32.768K晶振工作异常。
大家帮忙看下，你们板子上的RTC是否工作正常。可以通用这条指令看下：root@TinaLinux:/# echo 0x07090000,0x07090004 > /sys/class/sunxi_dump/dump root@TinaLinux:/# cat /sys/class/sunxi_dump/dump 0x0000000007090000: 0x00004010 0x00000004 -
回复: 【开源开发板】D1s-Nezha开发板全全开源上架（内含购买链接和全部软硬件资料）发布在 D1系列-RISC-V
@yuzukitsuru
可以了。我在kernel menuconfig 中关闭了蓝牙子系统。 -
回复: 【开源开发板】D1s-Nezha开发板全全开源上架（内含购买链接和全部软硬件资料）发布在 D1系列-RISC-V
@yuzukitsuru
关闭了，重新编译，还是报错！
部分logo如下：# update .config export MAKEFLAGS= ; [ -f /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.config ] || cp /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.config.set /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.config export MAKEFLAGS= ; make -C /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61 HOSTCFLAGS="-O2 -I/home/embedfire/tina-d1-h/out/host/include -I/home/embedfire/tina-d1-h/out/host/usr/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="riscv64-unknown-linux-gnu-" ARCH="riscv" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" CONFIG_SHELL="bash" V='' EXTRA_LDSFLAGS="-I/home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha -include symtab.h" CC="riscv64-unknown-linux-gnu-gcc" INSTALL_HDR_PATH=/home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/user_headers headers_install make[5]: Entering directory '/home/embedfire/tina-d1-h/lichee/linux-5.4' INSTALL /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/user_headers/include make[5]: Leaving directory '/home/embedfire/tina-d1-h/lichee/linux-5.4' . /home/embedfire/tina-d1-h/build/shell.sh; grep '=[ym]' /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.config.set | LC_ALL=C sort | md5s > /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.vermagic touch /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61/.configured rm -f /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/symtab.h touch /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/symtab.h make -C /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/linux-5.4.61 HOSTCFLAGS="-O2 -I/home/embedfire/tina-d1-h/out/host/include -I/home/embedfire/tina-d1-h/out/host/usr/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="riscv64-unknown-linux-gnu-" ARCH="riscv" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" CONFIG_SHELL="bash" V='' EXTRA_LDSFLAGS="-I/home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha -include symtab.h" CC="riscv64-unknown-linux-gnu-gcc" vmlinux make[5]: Entering directory '/home/embedfire/tina-d1-h/lichee/linux-5.4' scripts/Makefile.asm-generic:25: redundant generic-y found in arch/riscv/include/asm/Kbuild: device.h CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o AR init/built-in.a LD vmlinux.o /home/embedfire/tina-d1-h/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/riscv64-unknown-linux-gnu-ld: drivers/bluetooth/xradio_btlpm.o: in function `bluesleep_sleep_wakeup': xradio_btlpm.c:(.text.unlikely+0x204): multiple definition of `bluesleep_sleep_wakeup'; drivers/bluetooth/rtl_btlpm.o:rtl_btlpm.c:(.text+0x4b4): first defined here /home/embedfire/tina-d1-h/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/riscv64-unknown-linux-gnu-ld: drivers/bluetooth/xradio_btlpm.o: in function `.LANCHOR0': xradio_btlpm.c:(.bss+0x10): multiple definition of `sleep_dir'; drivers/bluetooth/rtl_btlpm.o:rtl_btlpm.c:(.bss+0x0): first defined here /home/embedfire/tina-d1-h/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/riscv64-unknown-linux-gnu-ld: drivers/bluetooth/xradio_btlpm.o: in function `.LANCHOR0': xradio_btlpm.c:(.bss+0x18): multiple definition of `bluetooth_dir'; drivers/bluetooth/rtl_btlpm.o:rtl_btlpm.c:(.bss+0x8): first defined here /home/embedfire/tina-d1-h/prebuilt/gcc/linux-x86/riscv/toolchain-thead-glibc/riscv64-glibc-gcc-thead_20200702/bin/riscv64-unknown-linux-gnu-ld: drivers/bluetooth/xradio_btlpm.o: in function `.LANCHOR2': xradio_btlpm.c:(.data+0xe8): multiple definition of `sleep_workqueue'; drivers/bluetooth/rtl_btlpm.o:rtl_btlpm.c:(.data+0xe8): first defined here Makefile:1178: recipe for target 'vmlinux' failed make[5]: *** [vmlinux] Error 1 make[5]: Leaving directory '/home/embedfire/tina-d1-h/lichee/linux-5.4' Makefile:29: recipe for target '/home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/symtab.h' failed make[4]: *** [/home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/linux-d1s-nezha/symtab.h] Error 2 make[4]: Leaving directory '/home/embedfire/tina-d1-h/target/allwinner/d1s-nezha' Makefile:13: recipe for target 'install' failed make[3]: *** [install] Error 2 make[3]: Leaving directory '/home/embedfire/tina-d1-h/target/allwinner' target/Makefile:21: recipe for target 'target/allwinner/install' failed make[2]: *** [target/allwinner/install] Error 2 make[2]: Leaving directory '/home/embedfire/tina-d1-h' target/Makefile:17: recipe for target '/home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/stamp/.target_install' failed make[1]: *** [/home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/stamp/.target_install] Error 2 make[1]: Leaving directory '/home/embedfire/tina-d1-h' /home/embedfire/tina-d1-h/build/toplevel.mk:304: recipe for target 'world' failed make: *** [world] Error 2 [2]+ 已完成 $T/tools/build/buildserver --path $T 2> /dev/null 1>&2 #### make failed to build some targets (40 seconds) #### embedfire@embedfire:~/tina-d1-h$ -
回复: 【开源开发板】D1s-Nezha开发板全全开源上架（内含购买链接和全部软硬件资料）发布在 D1系列-RISC-V
@yuzukitsuru 在 【Yuzuki手作】D1s-Nezha开发板全全开源上架（内含购买链接和全部软硬件资料） 中说：
bash
好多选项，关闭哪个？
Symbol: BUSYBOX_CONFIG_BASH_IS_ASH [=n] │ │ Type : boolean │ │ Prompt: ash │ │ Location: │ │ -> Base system │ │ -> busybox................................ Core utilities for embedded Linux (PACKAGE_busybox [=y]) │ │ -> Shells │ │ (2) -> Choose which shell is aliased to 'bash' name (<choice> [=y]) │ │ Defined at package/utils/busybox/config/shell/Config.in:58 │ │ Depends on: <choice> && !BUSYBOX_CONFIG_NOMMU [=n] │ │ │ │ │ │ Symbol: BUSYBOX_CONFIG_BASH_IS_HUSH [=n] │ │ Type : boolean │ │ Prompt: hush │ │ Location: │ │ -> Base system │ │ -> busybox................................ Core utilities for embedded Linux (PACKAGE_busybox [=y]) │ │ -> Shells │ │ (3) -> Choose which shell is aliased to 'bash' name (<choice> [=y]) │ │ Defined at package/utils/busybox/config/shell/Config.in:67 │ │ Depends on: <choice> │ │ │ │ │ │ Symbol: BUSYBOX_CONFIG_BASH_IS_NONE [=y] │ │ Type : boolean │ │ Prompt: none │ │ Location: │ │ -> Base system │ │ -> busybox................................ Core utilities for embedded Linux (PACKAGE_busybox [=y]) │ │ -> Shells │ │ (4) -> Choose which shell is aliased to 'bash' name (<choice> [=y]) │ │ Defined at package/utils/busybox/config/shell/Config.in:75 │ │ Depends on: <choice> │ │ │ │ │ │ Symbol: BUSYBOX_CONFIG_HUSH_BASH_COMPAT [=n] │ │ Type : boolean │ │ Prompt: bash-compatible extensions Location: │ │ -> Base system │ │ -> busybox................................ Core utilities for embedded Linux (PACKAGE_busybox [=y]) │ │ -> Shells │ │ (5) -> hush (BUSYBOX_CONFIG_HUSH [=n]) │ │ Defined at package/utils/busybox/config/shell/Config.in:257 │ │ Depends on: PACKAGE_busybox [=y] && BUSYBOX_CUSTOM [=y] && (BUSYBOX_CONFIG_HUSH [=n] || BUSYBOX_CONFIG_SH_IS_HUSH [=n] || BUSYBOX_CONFIG_BASH_IS_HUSH [=n]) │ │ │ │ │ │ Symbol: BUSYBOX_DEFAULT_ASH_BASH_COMPAT [=y] │ │ Type : boolean │ │ Defined at package/utils/busybox/Config-defaults.in:2788 │ │ Depends on: PACKAGE_busybox [=y] && SYSTEM_INIT_PROCD [=n] │ │ │ │ │ │ Symbol: BUSYBOX_DEFAULT_BASH_IS_ASH [=n] │ │ Type : boolean │ │ Defined at package/utils/busybox/Config-defaults.in:2770 │ │ Depends on: PACKAGE_busybox [=y] && SYSTEM_INIT_PROCD [=n] │ │ │ │ │ │ Symbol: BUSYBOX_DEFAULT_BASH_IS_HUSH [=n] │ │ Type : boolean │ │ Defined at package/utils/busybox/Config-defaults.in:2773 │ │ Depends on: PACKAGE_busybox [=y] && SYSTEM_INIT_PROCD [=n] │ │ │ │ │ │ Symbol: BUSYBOX_DEFAULT_BASH_IS_NONE [=y] │ │ Type : boolean │ │ Defined at package/utils/busybox/Config-defaults.in:2776 │ │ Depends on: PACKAGE_busybox [=y] && SYSTEM_INIT_PROCD [=n] Symbol: BUSYBOX_DEFAULT_HUSH_BASH_COMPAT [=n] │ │ Type : boolean │ │ Defined at package/utils/busybox/Config-defaults.in:2833 │ │ Depends on: PACKAGE_busybox [=y] && SYSTEM_INIT_PROCD [=n] │ │ │ │ │ │ Symbol: DEFAULT_bash [=DEFAULT_bash] │ │ Type : unknown │ │ │ │ │ │ Symbol: PACKAGE_bash [=y] │ │ Type : tristate │ │ Prompt: bash.......................................... The GNU Bourne Again SHell │ │ Location: │ │ -> Utilities │ │ (6) -> Shells │ │ Defined at tmp/.config-package.in:49421 │ │ Selects: PACKAGE_libpthread [=y] && PACKAGE_libc [=y] && PACKAGE_libncurses [=y] && PACKAGE_librt [=y] && PACKAGE_libssp [=y] │ │ Selected by: PACKAGE_xzdiff [=n] && PACKAGE_xz-utils [=n] || PACKAGE_xzgrep [=n] && PACKAGE_xz-utils [=n] || PACKAGE_xzless [=n] && PACKAGE_xz-utils [=n] || PACKAGE_xzmore [=n] && PACKAGE_xz-ut │ │ -
回复: 【开源开发板】D1s-Nezha开发板全全开源上架（内含购买链接和全部软硬件资料）发布在 D1系列-RISC-V
1.使用的是Ubuntu18.04编译环境，已安装了如下包：
build-essential subversion git-core libncurses5-dev zlib1g-dev gawk flex quilt libssl-dev xsltproc libxml-parser-perl mercurial bzr ecj cvs unzip lib32z1 lib32z1-dev lib32stdc++6 libstdc++6
2.使用的是官网下载的SDK：tina D1H v2.0
3.安装了楼主提供的板级配置文件：https://github.com/Tina-Linux/tina-d1s-nezha
4.选择d1s-nezha编译，失败。请问怎么解决？@YuzukiTsuru部分logo如下所示：
install -d -m0755 /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/tmp-alsa-utils/usr/share/alsa/init install -m0644 /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/alsa-utils-1.1.0/ipkg-install/usr/share/alsa/init/* /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/tmp-alsa-utils/usr/share/alsa/init/ SHELL= flock /home/embedfire/tina-d1-h/tmp/.root-copy.flock -c 'cp -fpR /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/tmp-alsa-utils/. /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/' rm -rf /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/tmp-alsa-utils touch /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/rootfs/stamp/.alsa-utils_installed if [ -f /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/pkginfo/alsa-utils.default.install.clean ]; then rm -f /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/pkginfo/alsa-utils.default.install /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/pkginfo/alsa-utils.default.install.clean; fi; echo "alsa-utils" >> /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/pkginfo/alsa-utils.default.install make[3]: Leaving directory '/home/embedfire/tina-d1-h/package/utils/alsa-utils' make[3]: Entering directory '/home/embedfire/tina-d1-h/package/utils/bash' mkdir -p /home/embedfire/tina-d1-h/out/d1s-nezha/packages /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-sunxi/bash/CONTROL /home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/pkginfo install -d -m0755 /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-sunxi/bash/bin install -m0755 /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-install/bin/bash /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-sunxi/bash/bin/ ln -sf bash /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-sunxi/bash/bin/rbash find /home/embedfire/tina-d1-h/out/d1s-nezha/compile_dir/target/bash-4.3/ipkg-sunxi/bash -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf Package bash is missing dependencies for the following libraries: libhistory.so.6 Makefile:74: recipe for target '/home/embedfire/tina-d1-h/out/d1s-nezha/packages/base/bash_4.3.42-1_sunxi.ipk' failed make[3]: *** [/home/embedfire/tina-d1-h/out/d1s-nezha/packages/base/bash_4.3.42-1_sunxi.ipk] Error 1 make[3]: Leaving directory '/home/embedfire/tina-d1-h/package/utils/bash' package/Makefile:192: recipe for target 'package/utils/bash/compile' failed make[2]: *** [package/utils/bash/compile] Error 2 make[2]: Leaving directory '/home/embedfire/tina-d1-h' package/Makefile:189: recipe for target '/home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/stamp/.package_compile' failed make[1]: *** [/home/embedfire/tina-d1-h/out/d1s-nezha/staging_dir/target/stamp/.package_compile] Error 2 make[1]: Leaving directory '/home/embedfire/tina-d1-h' /home/embedfire/tina-d1-h/build/toplevel.mk:304: recipe for target 'world' failed make: *** [world] Error 2 [2]+ 已完成 $T/tools/build/buildserver --path $T 2> /dev/null 1>&2 #### make failed to build some targets (06:25 (mm:ss)) #### embedfire@embedfire:~/tina-d1-h$我看了一下，其中有提醒缺少libhistory.so.6
-
D1s Tina SDK 2.0中tplayer问题发布在 D1系列-RISC-V
1.使用的板子是芒果派MQ-R
2.刷入的镜像是基于Tina SDK 2.0构建，并打了Tina_d1x_append补丁。
3.使用tplayerdemo /root/test.mp4指令，可以播放视频，播放完成后，直接卡死。输入指令quit，也无效。部分打印logo如下：
root@TinaLinux:/usr/bin# tplayerdemo /root/test.mp4 WARNING: awplayer <cdx_log_set_level:30>: cdx Set log level to 6 INFO : cedarc <CedarPluginVDInit:79>: register h264 decoder success! INFO : cedarc <CedarPluginVDInit:84>: register mjpeg decoder success! INFO : cedarc <CedarPluginVDInit:86>: register mpeg2 decoder success! INFO : cedarc <CedarPluginVDInit:92>: register mpeg4dx decoder success! INFO : cedarc <CedarPluginVDInit:79>: register mpeg4H263 decoder success! INFO : cedarc <CedarPluginVDInit:90>: register mpeg4Normal decoder success! INFO : cedarc <CedarPluginVDInit:74>: register vc1 decoder success! INFO : cedarc <CedarPluginVDInit:85>: register h265 decoder success! INFO : cedarc <CedarPluginVDInit:70>: register vp6Soft decoder success! INFO : cedarc <CedarPluginVDInit:88>: register Wmv12Soft decoder success! ****************************************************************************************** * This program implements a simple player, you can type commands to control the player. * To show what commands supported, type 'help'. ****************************************************************************************** dd: writing '/dev/fb0': No space left on device 6001+0 records in 6000+0 records out argc = 2 argv[0] = tplayerdemo argv[1] = /root/test.mp4 may be is one file:cut down suffix is:.mp4 find the matched type:.mp4 create player:0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> tina_multimedia <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : tina3.5 branch: tina-dev[SNDCODEC][sunxi_card_hw_params][620]:stream_flag: 0 date : Mon Jul 15 19:04:59 2019 +0800 Change-Id: I5f6c8a88d7b387a312b7744797a0d5f8ab07ee7a ------------------------------------------------------------------------------- xplayer:process message XPLAYER_COMMAND_SET_AUDVE: enable hw clock IOSINK. xplayer:process messageenable_cedar_hw_clk,552 XPLAYER_COMMAND_SET_SURFACE. xplayer:process message XPLAYER_CVE: VE real_freq=576000000 OMMAND_SET_SUBCTRL. xplayer:process message XPLAYER_COMMAND_SET_DI. create player[0]:0xfec29d0 screen width:800,screen height:480 1:playVideo:0 before TPlayerSetDataSource,94712:/root/test.mp4 xplayer:process message XPLAYER_COMMAND_SET_SOURCE. xplayer:process message XPLAYER_COMMAND_PREPARE. INFO : cedarc <log_set_level:43>: Set log level to 5 from /vendor/etc/cedarc.conf ERROR : cedarc <DebugCheckConfig:301>: now cedarc log level:5 setDataSource end xplayer:process message XPLAYER_COMMAND_PREPARE. *****tplayer:video width = 640,height = 480 warning: unknown callback from Tinaplayer. TPLAYER_NOTIFY_PREPARED,has prepared. TPlayerPrepare end TPlayerSetHoldLastPicture() xplayer:process message XPLAYER_COMMAND_START. (Allwinner Audio Middle Layer),line(971) : Create Decoder!!===== (Allwinner Audio Middle Layer),line(603) : AudioDec_Installaudiolib ok (Allwinner Audio Middle Layer),line(606) : audio decoder init start ... (AllwinnerAlibs),line(50) : >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Audio <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< tag : audiocodec-v1.2 branch: new commit: 3ba65962c01cbf1280ddda19d843009b6ef8ce85 date : Tue Jan 8 16:25:27 2019 +0800 ---------------------------------------------------------------------- (AllwinnerAlibs),line(700) : ----Loading so success! (AllwinnerAlibs),line(902) : *************pAudioStreamInfo start****************** (AllwinnerAlibs),line(903) : eCodecFormat :id(4), name(aac low-complexy) (AllwinnerAlibs),line(904) : eSubCodecFormat :0 (AllwinnerAlibs),line(905) : nChannelNum :2 (AllwinnerAlibs),line(906) : nBitsPerSample :16 (AllwinnerAlibs),line(907) : nSampleRate :44100 (AllwinnerAlibs),line(908) : nAvgBitrate :128135 (AllwinnerAlibs),line(909) : nMaxBitRate :128135 (AllwinnerAlibs),line(910) : nFileSize :0 (AllwinnerAlibs),line(911) : eAudioBitstreamSource:0 (AllwinnerAlibs),line(912) : eDataEncodeType :0 (AllwinnerAlibs),line(913) : nCodecSpecificDataLen:2 (AllwinnerAlibs),line(914) : pCodecSpecificData :0x3fe8064dc0 (AllwinnerAlibs),line(915) : nFlags :0 (AllwinnerAlibs),line(916) : nBlockAlign :0 (AllwinnerAlibs),line(917) : *************pAudioStreamInfo end ****************** (AAC Decoder),line(36) : init successs... (Allwinner Audio Middle Layer),line(614) : AUDIO DECODE INIT OK...0 started. ERROR : awplayer <__LayerQueueBuffer:969>: *** picNode is full when queue buffer ERROR : awplayer <__LayerQueueBuffer:969>: *** picNode is full when queue buffer *****tplayer:video decoded width = 640,height = 480 *****tplayerdemo:video decoded width = 640,height = 480real set to display rect:w = 640,h = 480 warning: unknown callback from Tinaplayer. *****tplayer:video width = 640,height = 480 warning: unknown callback from Tinaplayer. ****player(0xfec4db0): first video pts = 66733***** ERROR : awplayer <__LayerQueueBuffer:969>: *** picNode is full when queue buffer ERROR : fbm.c <FbmReturnPicture:1043>: invalid frame status, a picture being returned, but bUsedByRender=0, bInValidPictureQueue=1, bAlreadyDisplayed=0. ERROR : fbm.c <FbmReturnPicture:1044>: **picture[0x3fe4001f08],id[8] WARNING: cedarc <ReturnPicture:1698>: FbmReturnPicture return fail, it means the picture being returned it not one of this FBM. tplayerdemo# tplayerdemo# tplayerdemo# tplayerdemo# tplayerdemo# quit tplayerdemo# COMMAND_QUIT xplayer:process message XPLAYER_COMMAND_RESET. ^CGot signal 2, exiting ...