我想将驱动编译进内核中，我做的操作如下：
1.编写Kconfig Makefile 驱动文件

Makefile：
obj-$(CONFIG_PLATFORM_HELLOWORLD) += platform_helloworld.o

Kconfig：
config helloworld
    bool "helloworld supported"
    default y
    help
        hello world for sunxi platform

驱动文件：
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/mod_devicetable.h>

static struct device_node *mydevice_node;
static struct property *myproperty;
int size;

int my_probe(struct platform_device *dev){
    int ret = 0;
    printk("furry hello platform_device probe\n");
    mydevice_node = of_find_node_by_name(NULL, "mykey");
    printk("furry mydevice_node = %s\n", mydevice_node->name);
    myproperty = of_find_property(mydevice_node, "reg", &size);
    printk("furry myproperty = %s\n", myproperty->name);
    return ret;
}

int my_remove(struct platform_device *dev){
    int ret = 0;
    printk("furry hello platform_device remove\n");
    return ret;
}

const struct platform_device_id id_table_my = {
    .name = "my_platform_driver",
}

const struct of_device_id of_match_table_my[] = {
    {.compatible = "mydevices_tree", },
    {}
};

struct platform_driver my_platform_driver = {
    .probe = my_probe,
    .remove = my_remove,
    .driver = {
        .name = "my_platform_driver",
        .owner = THIS_MODULE,
        .of_match_table = of_match_table_my,
    };
    .id_table = &id_table_my,
};

static int __init platform_init(void){
    printk("furry hello platform_init\n");
    platform_driver_register();
    return 0;
}

static void __exit platform_exit(void){
    printk("furry hello platform_exit\n");
    platform_driver_unregister();
}

module_init(platform_init);
module_exit(platform_exit);
MODUEL_AUTHOR("furry");
MODULE_LICENSE("GPL");

2.在board.dts的根节点下做了如下添加

furry {
	#address-cell = <1>;
	#size-cell = <1>;
	compatible = "simple-bus";
	mykey{
		compatible = "mydevices_tree";
		reg = <0x32 0x01>;
	};
};

3.在上级Kconfig中做了如下添加

source "drivers/char/helloworld/Kconfig"

然而，在make menuconfig中搜索发现我添加的选项在security ->OPTEE路径下，

可进入这个路径后里面没有任何显示，且这时候编译的固件是没有这个驱动的，

我又尝试在kernel根目录下的.config文件中添加了CONFIG_PLATFORM_HELLOWORLD但编译时好像会根据Kconfig的内容重新生成，故也没有效果。所以这里有几个疑问想请教下各位大佬：
1.怎么控制自己添加的Kconfig选项在make menuconfig的什么目录结构下？
2.有直接修改.config而不被覆盖的方法吗？
3.为什么OPTEE下面没有任何选项？
若有提供回答的或者提供方向的，非常感谢！

@whycanservice 明白了这个是在tf卡的资源，好像是我这个tf太大了导致加载比较慢。

@whycanservice 找到问题了应该是烧录错误了。但现在卡在了kernel启动中

[34]HELLO! BOOT0 is starting!
[37]BOOT0 commit : adaf1174cc
[39]set pll start
[41]periph0 has been enabled
[44]set pll end
[46][pmu]: bus read error
[48]board init ok
[50]ZQ value = 0x2f
[52]get_pmu_exist() = -1
[54]ddr_efuse_type: 0xa
[56]trefi:7.8ms
[59][AUTO DEBUG] single rank and full DQ!
[62]ddr_efuse_type: 0xa
[65]trefi:7.8ms
[67][AUTO DEBUG] rank 0 row = 13
[70][AUTO DEBUG] rank 0 bank = 4
[73][AUTO DEBUG] rank 0 page size = 2 KB
[77]DRAM BOOT DRIVE INFO: V0.33
[80]DRAM CLK = 528 MHz
[82]DRAM Type = 2 (2:DDR2,3:DDR3)
[85]DRAMC read ODT  off.
[87]DRAM ODT off.
[89]ddr_efuse_type: 0xa
[92]DRAM SIZE =64 M
[93]dram_tpr4:0x0
[95]PLL_DDR_CTRL_REG:0xf8002b00
[98]DRAM_CLK_REG:0xc0000000
[101][TIMING DEBUG] MR2= 0x0
[105]DRAM simple test OK.
[107]dram size =64
[109]card no is 0
[111]sdcard 0 line count 4
[113][mmc]: mmc driver ver 2021-04-2 16:45
[123][mmc]: Wrong media type 0x0
[126][mmc]: ***Try SD card 0***
[136][mmc]: HSSDR52/SDR25 4 bit
[139][mmc]: 50000000 Hz
[141][mmc]: 128001 MB
[143][mmc]: ***SD/MMC 0 init OK!!!***
[205]Loading boot-pkg Succeed(index=0).
[209]Entry_name        = opensbi
[212]Entry_name        = u-boot
[216]Entry_name        = dtb
[219]mmc not para
[220]Jump to second Boot.

OpenSBI auto-t113-linux-V0.8-1-g771d82e
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

Platform Name          : T-HEAD Xuantie Platform
Platform HART Features : RV64ACDFIMSUVX
Platform Max HARTs     : 1
Current Hart           : 0
Firmware Base          : 0x41fc0400
Firmware Size          : 75 KB
Runtime SBI Version    : 0.2

MIDELEG : 0x0000000000000222
MEDELEG : 0x000000000000b1ff
PMP0    : 0x0000000041fc0000-0x0000000041fdffff (A)
PMP1    : 0x0000000040000000-0x000000007fffffff (A,R,W,X)
PMP2    : 0x0000000080000000-0x00000000bfffffff (A,R,W,X)
PMP3    : 0x0000000000020000-0x0000000000027fff (A,▒

U-Boot 2018.05-g2a1965a (Jul 10 2022 - 02:50:57 +0000) Allwinner Technology

[00.305]DRAM:  64 MiB
[00.307]Relocation Offset is: 01ed9000
[00.312]secure enable bit: 0
[00.314]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.321]flash init start
[00.323]workmode = 0,storage type = 1
[00.326][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.332][mmc]: get sdc_type fail and use default host:tm1.
[00.338][mmc]: can't find node "mmc0",will add new node
[00.343][mmc]: fdt err returned <no error>
[00.347][mmc]: Using default timing para
[00.350][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.369][mmc]: card_caps:0x3000000a
[00.372][mmc]: host_caps:0x3000003f
[00.376]sunxi flash init ok
[00.378]line:703 init_clocks
[00.381]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.399]unable to map hdmi registers
[00.402]drv_disp_init finish
[00.412]Loading Environment from SUNXI_FLASH... OK
[00.436]boot_gui_init:start
[00.439]set disp.dev2_output_type fail. using defval=0
[00.446]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 0 ms
[00.456]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[00.469]out of usb burn from boot: not need burn key
[00.474]Item0 (Map) magic is bad
[00.477]the secure storage item0 copy0 magic is bad
[00.482]Item0 (Map) magic is bad
[00.485]the secure storage item0 copy1 magic is bad
[00.489]Item0 (Map) magic is bad
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.504]update part info
[00.507]update bootcmd
[00.510]change working_fdt 0x42a98da0 to 0x42a78da0
disable nand error: FDT_ERR_BADPATH
[00.519]The storage not support sample function
No reserved memory region found in source FDT
[00.544]update dts
noncached_alloc(): addr = 0x42b02a40
noncached_alloc(): addr = 0x42b02a80
noncached_alloc(): addr = 0x42b02ac0
noncached_alloc(): addr = 0x42b03300
geth_sys_init:639: get node 'gmac0' error
geth_sys_init fail!
[00.564]Board Net Initialization Failed
[00.568]No ethernet found.
Hit any key to stop autoboot:  1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.636]LCD open finish                                                                                                                                                                                     0
[01.970]no vendor_boot partition is found
Android's image name: f133-mq_r
Detect comp none
[01.987]
Starting kernel ...

[01.989][mmc]: MMC Device 2 not found
[01.993][mmc]: mmc 2 not find, so not exit
[    0.000000] Linux version 5.4.61 (furry@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #2 PREEMPT Sat Aug 5 09:13:12 UTC 2023
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000040000000-0x0000000043ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000043ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000043ffffff]
[    0.000000] On node 0 totalpages: 16384
[    0.000000]   DMA32 zone: 224 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 16384 pages, LIFO batch:3
[    0.000000] elf_hwcap is 0x20112d
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16160
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:private@mmcblk0p6:rootfs_data@mmcblk0p7:UDISK@mmcblk0p8 cma=0M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g2a1965a(07/10/2022-02:50:57) mbr_o
[    0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 55896K/65536K available (4125K kernel code, 402K rwdata, 1700K rodata, 136K init, 229K bss, 9640K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
[    0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts.
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000026] riscv_timer_clockevent depends on broadcast, but no broadcast function available
[    0.000367] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000944] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000966] pid_max: default: 32768 minimum: 301
[    0.001126] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.001142] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.002827] ASID allocator initialised with 65536 entries
[    0.003005] rcu: Hierarchical SRCU implementation.
[    0.003684] devtmpfs: initialized
[    0.021601] random: get_random_u32 called from bucket_table_alloc.isra.27+0x102/0x124 with crng_init=0
[    0.022455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.022487] futex hash table entries: 256 (order: 0, 6144 bytes, linear)
[    0.022631] pinctrl core: initialized pinctrl subsystem
[    0.024016] NET: Registered protocol family 16
[    0.024747] DMA: preallocated 256 KiB pool for atomic allocations
[    0.025415] cpuidle: using governor menu
[    0.067528] rtc_ccu: sunxi ccu init OK
[    0.076164] clock: sunxi ccu init OK
[    0.078001] clock: sunxi ccu init OK
[    0.106923] iommu: Default domain type: Translated
[    0.107117] sunxi iommu: irq = 4
[    0.108327] SCSI subsystem initialized
[    0.108571] usbcore: registered new interface driver usbfs
[    0.108662] usbcore: registered new interface driver hub
[    0.108771] usbcore: registered new device driver usb
[    0.109748] Advanced Linux Sound Architecture Driver Initialized.
[    0.111034] pwm module init!
[    0.112675] g2d 5410000.g2d: Adding to iommu group 0
[    0.113189] G2D: rcq version initialized.major:252
[    0.114202] clocksource: Switched to clocksource riscv_clocksource
[    0.128323] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.131669] NET: Registered protocol family 2
[    0.132556] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.132597] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.132614] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.132628] TCP: Hash tables configured (established 512 bind 512)
[    0.132774] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.132817] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.133044] NET: Registered protocol family 1
[    0.134341] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.134952] spi spi0: spi0 supply spi not found, using dummy regulator
[    0.135227] sunxi_spi_resource_get()2116 - [spi0] SPI MASTER MODE
[    0.135295] sunxi_spi_resource_get()2154 - Failed to get sample mode
[    0.135305] sunxi_spi_resource_get()2159 - Failed to get sample delay
[    0.135315] sunxi_spi_resource_get()2163 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.135382] sunxi_spi_clk_init()2205 - [spi0] mclk 100000000
[    0.136219] sunxi_spi_probe()2623 - [spi0]: driver probe succeed, base ffffffd004058000, irq 31
[    0.138363] workingset: timestamp_bits=62 max_order=14 bucket_order=0
[    0.146618] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.146867] ntfs: driver 2.1.32 [Flags: R/W].
[    0.147204] fuse: init (API version 7.31)
[    0.168466] io scheduler mq-deadline registered
[    0.168482] io scheduler kyber registered
[    0.169392] [DISP]disp_module_init
[    0.170025] disp 5000000.disp: Adding to iommu group 0
[    0.170612] [DISP] parser_disp_init_para,line:1430:
[    0.170618] of_property_read fb0_width fail
[    0.170638] [DISP] disp_init,line:2386:
[    0.170643] smooth display screen:0 type:1 mode:4
[    0.211680] display_fb_request,fb_id:0
[    0.219864] Freeing logo buffer memory: 1500K
[    0.220403] disp_al_manager_apply ouput_type:1
[    0.220851] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator
[    0.221658] [DISP]disp_module_init finish
[    0.222568] sunxi_sid_init()551 - insmod ok
[    0.223166] pwm-regulator: supplied by regulator-dummy
[    0.224985] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    0.225467] uart uart0: uart0 supply uart not found, using dummy regulator
[    0.225934] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI
[    0.225965] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    0.942802] printk: console [ttyS0] enabled
[    0.948735] misc dump reg init
[    0.953206] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.964537] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    0.971752] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    0.979093] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    0.986565] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    0.993073] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    1.000065] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    1.007807] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    1.015732] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    1.023822] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    1.031533] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    1.038365] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    1.045910] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0
[    1.054134] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11
[    1.061897] [ADDR_MGT] addr_mgt_probe: success.
[    1.068054] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223
[    1.075300] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    1.087062] random: fast init done
[    1.352562] random: crng init done
[    2.074307] sunxi-spinand-phy: read id failed : -110
[    2.079875] spi-nand: probe of spi0.0 failed with error -110
[    2.086331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.093639] sunxi-ehci: EHCI SUNXI driver
[    2.098616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.105589] sunxi-ohci: OHCI SUNXI driver
[    2.111347] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.122315] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.133077] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.144449] sunxi-rtc 7090000.rtc: registered as rtc0
[    2.150118] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.160794] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:03:55 UTC (235)
[    2.169882] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    2.175902] i2c /dev entries driver
[    2.179844] sunxi cedar version 1.1
[    2.184016] sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    2.190405] VE: install start!!!
[    2.190405]
[    2.195993] VE: cedar-ve the get irq is 6
[    2.195993]
[    2.202328] VE: ve_debug_proc_info:00000000854c5cd8, data:000000005465e8fa, lock:00000000744b596e
[    2.202328]
[    2.213970] VE: install end!!!
[    2.213970]
[    2.219041] VE: sunxi_cedar_probe
[    2.223709] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    2.235283] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    2.245367] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    2.251540] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    2.257974] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    2.264413] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    2.270818] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    2.277380] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    2.283884] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    2.290419] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    2.297484] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    2.302826] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail
[    2.309571] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.320718] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    2.340916] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.365394] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    2.371069] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.383432] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    2.393512] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    2.399853] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    2.406241] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    2.412728] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    2.419191] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.430808] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    2.437350] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    2.443872] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    2.450528] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    2.457132] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    2.466550] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.478416] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.489690] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    2.499057] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.510685] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.535037] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    2.542881] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.550221] ashmem: initialized
[    2.553765] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    2.560691] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.572327] exFAT: Version 1.3.0
[    2.579128] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    2.592669] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    2.592669]
[    2.610123] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    2.621096] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.630692] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    2.638898] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.645735] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.658052] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.664996] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    2.676656] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.684048] sid_rd_ver_reg()254 - ver >= 4, soc ver:5
[    2.689711] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    2.696551] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    2.707850] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    2.719619] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    2.729597] mmc0: new high speed SDXC card at address 211f
[    2.735861] [SNDCODEC][sunxi_card_init][583]:card init finished
[    2.745702] mmcblk0: mmc0:211f APPSD 125 GiB
[    2.751494] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    2.765719] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0
[    2.777266] Alternate GPT is invalid, using primary GPT.
[    2.783261]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    2.789018] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    2.799603] NET: Registered protocol family 10
[    2.806373] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    2.815250] Segment Routing with IPv6
[    2.819541] NET: Registered protocol family 17
[    2.848068] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[    2.862997] sunxi-i2c sunxi-i2c2: probe success
[    2.870404] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    2.884471] get ehci0-controller wakeup-source is fail.
[    2.890404] sunxi ehci0-controller don't init wakeup source
[    2.896725] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000661b28, 0x:ffffffd0040fa000, irq_no:2e
[    2.910231] [sunxi-ehci0]: Not init ehci0
[    2.915276] get ohci0-controller wakeup-source is fail.
[    2.921220] sunxi ohci0-controller don't init wakeup source
[    2.927493] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000661ef0
[    2.937948] [sunxi-ohci0]: Not init ohci0
[    2.942952] get ehci1-controller wakeup-source is fail.
[    2.948987] sunxi ehci1-controller don't init wakeup source
[    2.955250] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0006622b8, 0x:ffffffd004835000, irq_no:31
[    2.969156] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    2.982745] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    2.990017] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    2.999926] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000
[    3.034258] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    3.043129] hub 1-0:1.0: USB hub found
[    3.047490] hub 1-0:1.0: 1 port detected
[    3.053019] get ohci1-controller wakeup-source is fail.
[    3.059070] sunxi ohci1-controller don't init wakeup source
[    3.065413] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000662680
[    3.076142] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    3.088650] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    3.095939] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    3.105804] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400
[    3.179307] hub 2-0:1.0: USB hub found
[    3.183587] hub 2-0:1.0: 1 port detected
[    3.191004] get usb_detect_mode is fail, -22
[    3.195889] get det_vbus is fail, -84
[    3.200003] get id is fail, -84
[    3.206062] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.215793] clk: Not disabling unused clocks
[    3.220560] ALSA device list:
[    3.223863]   #0: audiocodec
[    3.227157] cfg80211: failed to load regulatory.db
[    3.232590] alloc_fd: slot 0 not NULL!
[    3.242620] VFS: Mounted root (squashfs filesystem) readonly on device 179:5.
[    3.252508] devtmpfs: mounted
[    3.256091] Freeing unused kernel memory: 136K
[    3.261045] This architecture does not have kernel memory protection.
[    3.268383] Run /pseudo_init as init process
mount: mounting none on /dev failed: Device or resource busy
[    3.890030] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    3.908590] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
------run rc.preboot file-----
[    4.244309]
[    4.244309] insmod_device_driver
[    4.244309]
[    4.251552] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator
[    4.265832] device_chose finished 142!

看起来像是文件系统的问题吗？

@whycanservice 是的TF卡里面

@whycanservice

--==========--
PACK_CHIP         sun20iw1p1
PACK_PLATFORM     tina
PACK_BOARD        f133-mq_r
PACK_KERN        
PACK_DEBUG        uart0
PACK_SIG          none
PACK_SECURE       none
PACK_MODE         normal
PACK_FUNC         android
PACK_PROGRAMMER   none
PACK_TAR_IMAGE    none
PACK_TOPDIR       /home/furry/f133/Tina-Linux
--==========--
No kernel param, parse it from f133
copying tools file
copying configs file
storage_type value is 1
rm /home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition_nor.fex
rm /home/furry/f133/Tina-Linux/out/f133-mq_r/image/image_nor.cfg
copying boot resource
copying boot file
make user resource for : /home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.fex
handle partition user-res
no user resource partitions
APP_PART_DOWNLOAD_FILE = /home/furry/f133/Tina-Linux/out/f133-mq_r/image/app.fex
Need size of filesystem
no data resource partitions
don't build dtbo ...
update_chip

sboot file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sboot.bin
script file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_config.bin

update:unable to open sboot file
script update sboot ok
pack boot package
GetPrivateProfileSection read to end
content_count=3
LICHEE_REDUNDANT_ENV_SIZE config in BoardConfig.mk
--mkenvimage create redundant env data!--
---redundant env data size 0x20000---
packing for tina linux
normal
mbr count = 4

partitation file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.bin
mbr_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sunxi_mbr.fex
download_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/dlinfo.fex

mbr size = 16384
mbr magic softw411
disk name=boot-resource
disk name=env
disk name=env-redund
disk name=boot
disk name=rootfs
disk name=private
disk name=rootfs_data
disk name=UDISK
this is not a partition key
update_for_part_info 0
crc 0 = 20ee024
crc 1 = 97b3b179
crc 2 = f20544df
crc 3 = 67b81582
gpt_head->header_crc32 = 0x56064bd1
GPT----part num 8---
gpt_entry: 128
gpt_header: 92
GPT:boot-resource: 12000         121f7       
GPT:env         : 121f8         123ef       
GPT:env-redund  : 123f0         125e7       
GPT:boot        : 125e8         160f7       
GPT:rootfs      : 160f8         250f7       
GPT:private     : 250f8         278f7       
GPT:rootfs_data : 278f8         33dd7       
GPT:UDISK       : 33dd8         ffffffde    
update gpt file ok
update mbr file ok
temp = 20
mbr count = 4 total_sectors = 15269888 logic_offset = 40960

partitation file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.bin
mbr_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sunxi_mbr.fex
download_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/dlinfo.fex

mbr size = 16384
mbr magic softw411
disk name=boot-resource
disk name=env
disk name=env-redund
disk name=boot
disk name=rootfs
disk name=private
disk name=rootfs_data
disk name=UDISK
this is not a partition key
update_for_part_info 0
crc 0 = 20ee024
crc 1 = 97b3b179
crc 2 = f20544df
crc 3 = 67b81582
gpt_head->header_crc32 = 0xcc02e243
GPT----part num 8---
gpt_entry: 128
gpt_header: 92
GPT:boot-resource: 12000         121f7       
GPT:env         : 121f8         123ef       
GPT:env-redund  : 123f0         125e7       
GPT:boot        : 125e8         160f7       
GPT:rootfs      : 160f8         250f7       
GPT:private     : 250f8         278f7       
GPT:rootfs_data : 278f8         33dd7       
GPT:UDISK       : 33dd8         e8ffde      
update gpt file ok
update mbr file ok
====================================
show "sys_partition_for_dragon.fex" message
------------------------------------
  [mbr]
  mbr_size  : 16384 Kbyte
------------------------------------
  partition_name  : boot-resource
  partition_size  : 504
  downloadfile  : boot-resource.fex
  boot-resource.fex size : 80K byte
------------------------------------
  partition_name  : env
  partition_size  : 504
  downloadfile  : env.fex
  env.fex size : 128K byte
------------------------------------
  partition_name  : env-redund
  partition_size  : 504
  downloadfile  : env.fex
  env.fex size : 128K byte
------------------------------------
  partition_name  : boot
  partition_size  : 15120
  downloadfile  : boot.fex
  boot.fex -> /home/furry/f133/Tina-Linux/out/f133-mq_r/boot.img
  boot.img size : 6.5M byte
------------------------------------
  partition_name  : rootfs
  partition_size  : 61440
  downloadfile  : rootfs.fex
  rootfs.fex -> /home/furry/f133/Tina-Linux/out/f133-mq_r/rootfs.img
  rootfs.img size : 8.3M byte
------------------------------------
  partition_name  : private
  partition_size  : 10240
------------------------------------
  partition_name  : rootfs_data
  partition_size  : 50400
------------------------------------
  partition_name  : UDISK
------------------------------------
/home/furry/f133/Tina-Linux/out/host/bin/
/home/furry/f133/Tina-Linux/out/f133-mq_r/image
Begin Parse sys_partion.fex
Add partion boot-resource.fex BOOT-RESOURCE_FEX
Add partion very boot-resource.fex BOOT-RESOURCE_FEX
FilePath: boot-resource.fex
FileLength=14000Add partion env.fex ENV_FEX000000000
Add partion very env.fex ENV_FEX000000000
FilePath: env.fex
FileLength=20000Add partion env.fex ENV_FEX000000000
Add partion very env.fex ENV_FEX000000000
FilePath: env.fex
FileLength=20000Add partion boot.fex BOOT_FEX00000000
Add partion very boot.fex BOOT_FEX00000000
FilePath: boot.fex
FileLength=674000Add partion rootfs.fex ROOTFS_FEX000000
Add partion very rootfs.fex ROOTFS_FEX000000
FilePath: rootfs.fex
FileLength=840000BuildImg 0
Dragon execute image.cfg SUCCESS !
----------image is for nand/emmc----------
----------image is at----------

/home/furry/f133/Tina-Linux/out/f133-mq_r/tina_f133-mq_r_uart0.img

pack finish

这是打包时的log。是给的空间太小了吗。

@whycanservice 感谢你的回复。magic头错误是编译固件的配置有问题吗？

[34]HELLO! BOOT0 is starting!
[37]BOOT0 commit : adaf1174cc
[39]set pll start
[41]periph0 has been enabled
[44]set pll end
[46][pmu]: bus read error
[48]board init ok
[50]ZQ value = 0x2f
[52]get_pmu_exist() = -1
[54]ddr_efuse_type: 0xa
[56]trefi:7.8ms
[58][AUTO DEBUG] single rank and full DQ!
[62]ddr_efuse_type: 0xa
[64]trefi:7.8ms
[67][AUTO DEBUG] rank 0 row = 13
[70][AUTO DEBUG] rank 0 bank = 4
[73][AUTO DEBUG] rank 0 page size = 2 KB
[76]DRAM BOOT DRIVE INFO: V0.33
[79]DRAM CLK = 528 MHz
[81]DRAM Type = 2 (2:DDR2,3:DDR3)
[85]DRAMC read ODT  off.
[87]DRAM ODT off.
[89]ddr_efuse_type: 0xa
[91]DRAM SIZE =64 M
[93]dram_tpr4:0x0
[95]PLL_DDR_CTRL_REG:0xf8002b00
[98]DRAM_CLK_REG:0xc0000000
[100][TIMING DEBUG] MR2= 0x0
[105]DRAM simple test OK.
[107]dram size =64
[109]card no is 0
[111]sdcard 0 line count 4
[113][mmc]: mmc driver ver 2021-04-2 16:45
[122][mmc]: Wrong media type 0x0
[125][mmc]: ***Try SD card 0***
[135][mmc]: HSSDR52/SDR25 4 bit
[138][mmc]: 50000000 Hz
[140][mmc]: 128001 MB
[143][mmc]: ***SD/MMC 0 init OK!!!***
[205]error:bad checksum.
[209]error:bad magic.
[211]Loading boot-pkg fail(error=4)

如上，启动错误。求指路可能是哪里的问题。