D1芯片无法启动
-
[34]HELLO! BOOT0 is starting! [37]BOOT0 commit : adaf1174cc [39]set pll start [41]periph0 has been enabled [44]set pll end [46][pmu]: bus read error [48]board init ok [50]ZQ value = 0x2f [52]get_pmu_exist() = -1 [54]ddr_efuse_type: 0xa [56]trefi:7.8ms [58][AUTO DEBUG] single rank and full DQ! [62]ddr_efuse_type: 0xa [64]trefi:7.8ms [67][AUTO DEBUG] rank 0 row = 13 [70][AUTO DEBUG] rank 0 bank = 4 [73][AUTO DEBUG] rank 0 page size = 2 KB [76]DRAM BOOT DRIVE INFO: V0.33 [79]DRAM CLK = 528 MHz [81]DRAM Type = 2 (2:DDR2,3:DDR3) [85]DRAMC read ODT off. [87]DRAM ODT off. [89]ddr_efuse_type: 0xa [91]DRAM SIZE =64 M [93]dram_tpr4:0x0 [95]PLL_DDR_CTRL_REG:0xf8002b00 [98]DRAM_CLK_REG:0xc0000000 [100][TIMING DEBUG] MR2= 0x0 [105]DRAM simple test OK. [107]dram size =64 [109]card no is 0 [111]sdcard 0 line count 4 [113][mmc]: mmc driver ver 2021-04-2 16:45 [122][mmc]: Wrong media type 0x0 [125][mmc]: ***Try SD card 0*** [135][mmc]: HSSDR52/SDR25 4 bit [138][mmc]: 50000000 Hz [140][mmc]: 128001 MB [143][mmc]: ***SD/MMC 0 init OK!!!*** [205]error:bad checksum. [209]error:bad magic. [211]Loading boot-pkg fail(error=4)如上，启动错误。求指路可能是哪里的问题。
-
@furyfangyu 在 无法启动 中说：
[205]error:bad checksum.
[209]error:bad magic.
[211]Loading boot-pkg fail(error=4)刷写的固件有问题，magic头错误了
-
@whycanservice 感谢你的回复。magic头错误是编译固件的配置有问题吗？
-
--==========-- PACK_CHIP sun20iw1p1 PACK_PLATFORM tina PACK_BOARD f133-mq_r PACK_KERN PACK_DEBUG uart0 PACK_SIG none PACK_SECURE none PACK_MODE normal PACK_FUNC android PACK_PROGRAMMER none PACK_TAR_IMAGE none PACK_TOPDIR /home/furry/f133/Tina-Linux --==========-- No kernel param, parse it from f133 copying tools file copying configs file storage_type value is 1 rm /home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition_nor.fex rm /home/furry/f133/Tina-Linux/out/f133-mq_r/image/image_nor.cfg copying boot resource copying boot file make user resource for : /home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.fex handle partition user-res no user resource partitions APP_PART_DOWNLOAD_FILE = /home/furry/f133/Tina-Linux/out/f133-mq_r/image/app.fex Need size of filesystem no data resource partitions don't build dtbo ... update_chip sboot file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sboot.bin script file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_config.bin update:unable to open sboot file script update sboot ok pack boot package GetPrivateProfileSection read to end content_count=3 LICHEE_REDUNDANT_ENV_SIZE config in BoardConfig.mk --mkenvimage create redundant env data!-- ---redundant env data size 0x20000--- packing for tina linux normal mbr count = 4 partitation file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.bin mbr_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sunxi_mbr.fex download_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/dlinfo.fex mbr size = 16384 mbr magic softw411 disk name=boot-resource disk name=env disk name=env-redund disk name=boot disk name=rootfs disk name=private disk name=rootfs_data disk name=UDISK this is not a partition key update_for_part_info 0 crc 0 = 20ee024 crc 1 = 97b3b179 crc 2 = f20544df crc 3 = 67b81582 gpt_head->header_crc32 = 0x56064bd1 GPT----part num 8--- gpt_entry: 128 gpt_header: 92 GPT:boot-resource: 12000 121f7 GPT:env : 121f8 123ef GPT:env-redund : 123f0 125e7 GPT:boot : 125e8 160f7 GPT:rootfs : 160f8 250f7 GPT:private : 250f8 278f7 GPT:rootfs_data : 278f8 33dd7 GPT:UDISK : 33dd8 ffffffde update gpt file ok update mbr file ok temp = 20 mbr count = 4 total_sectors = 15269888 logic_offset = 40960 partitation file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sys_partition.bin mbr_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/sunxi_mbr.fex download_name file Path=/home/furry/f133/Tina-Linux/out/f133-mq_r/image/dlinfo.fex mbr size = 16384 mbr magic softw411 disk name=boot-resource disk name=env disk name=env-redund disk name=boot disk name=rootfs disk name=private disk name=rootfs_data disk name=UDISK this is not a partition key update_for_part_info 0 crc 0 = 20ee024 crc 1 = 97b3b179 crc 2 = f20544df crc 3 = 67b81582 gpt_head->header_crc32 = 0xcc02e243 GPT----part num 8--- gpt_entry: 128 gpt_header: 92 GPT:boot-resource: 12000 121f7 GPT:env : 121f8 123ef GPT:env-redund : 123f0 125e7 GPT:boot : 125e8 160f7 GPT:rootfs : 160f8 250f7 GPT:private : 250f8 278f7 GPT:rootfs_data : 278f8 33dd7 GPT:UDISK : 33dd8 e8ffde update gpt file ok update mbr file ok ==================================== show "sys_partition_for_dragon.fex" message ------------------------------------ [mbr] mbr_size : 16384 Kbyte ------------------------------------ partition_name : boot-resource partition_size : 504 downloadfile : boot-resource.fex boot-resource.fex size : 80K byte ------------------------------------ partition_name : env partition_size : 504 downloadfile : env.fex env.fex size : 128K byte ------------------------------------ partition_name : env-redund partition_size : 504 downloadfile : env.fex env.fex size : 128K byte ------------------------------------ partition_name : boot partition_size : 15120 downloadfile : boot.fex boot.fex -> /home/furry/f133/Tina-Linux/out/f133-mq_r/boot.img boot.img size : 6.5M byte ------------------------------------ partition_name : rootfs partition_size : 61440 downloadfile : rootfs.fex rootfs.fex -> /home/furry/f133/Tina-Linux/out/f133-mq_r/rootfs.img rootfs.img size : 8.3M byte ------------------------------------ partition_name : private partition_size : 10240 ------------------------------------ partition_name : rootfs_data partition_size : 50400 ------------------------------------ partition_name : UDISK ------------------------------------ /home/furry/f133/Tina-Linux/out/host/bin/ /home/furry/f133/Tina-Linux/out/f133-mq_r/image Begin Parse sys_partion.fex Add partion boot-resource.fex BOOT-RESOURCE_FEX Add partion very boot-resource.fex BOOT-RESOURCE_FEX FilePath: boot-resource.fex FileLength=14000Add partion env.fex ENV_FEX000000000 Add partion very env.fex ENV_FEX000000000 FilePath: env.fex FileLength=20000Add partion env.fex ENV_FEX000000000 Add partion very env.fex ENV_FEX000000000 FilePath: env.fex FileLength=20000Add partion boot.fex BOOT_FEX00000000 Add partion very boot.fex BOOT_FEX00000000 FilePath: boot.fex FileLength=674000Add partion rootfs.fex ROOTFS_FEX000000 Add partion very rootfs.fex ROOTFS_FEX000000 FilePath: rootfs.fex FileLength=840000BuildImg 0 Dragon execute image.cfg SUCCESS ! ----------image is for nand/emmc---------- ----------image is at---------- /home/furry/f133/Tina-Linux/out/f133-mq_r/tina_f133-mq_r_uart0.img pack finish这是打包时的log。是给的空间太小了吗。
-
烧录到哪里了？TF卡吗
-
@whycanservice 是的TF卡里面
-
@whycanservice 找到问题了应该是烧录错误了。但现在卡在了kernel启动中
[34]HELLO! BOOT0 is starting! [37]BOOT0 commit : adaf1174cc [39]set pll start [41]periph0 has been enabled [44]set pll end [46][pmu]: bus read error [48]board init ok [50]ZQ value = 0x2f [52]get_pmu_exist() = -1 [54]ddr_efuse_type: 0xa [56]trefi:7.8ms [59][AUTO DEBUG] single rank and full DQ! [62]ddr_efuse_type: 0xa [65]trefi:7.8ms [67][AUTO DEBUG] rank 0 row = 13 [70][AUTO DEBUG] rank 0 bank = 4 [73][AUTO DEBUG] rank 0 page size = 2 KB [77]DRAM BOOT DRIVE INFO: V0.33 [80]DRAM CLK = 528 MHz [82]DRAM Type = 2 (2:DDR2,3:DDR3) [85]DRAMC read ODT off. [87]DRAM ODT off. [89]ddr_efuse_type: 0xa [92]DRAM SIZE =64 M [93]dram_tpr4:0x0 [95]PLL_DDR_CTRL_REG:0xf8002b00 [98]DRAM_CLK_REG:0xc0000000 [101][TIMING DEBUG] MR2= 0x0 [105]DRAM simple test OK. [107]dram size =64 [109]card no is 0 [111]sdcard 0 line count 4 [113][mmc]: mmc driver ver 2021-04-2 16:45 [123][mmc]: Wrong media type 0x0 [126][mmc]: ***Try SD card 0*** [136][mmc]: HSSDR52/SDR25 4 bit [139][mmc]: 50000000 Hz [141][mmc]: 128001 MB [143][mmc]: ***SD/MMC 0 init OK!!!*** [205]Loading boot-pkg Succeed(index=0). [209]Entry_name = opensbi [212]Entry_name = u-boot [216]Entry_name = dtb [219]mmc not para [220]Jump to second Boot. OpenSBI auto-t113-linux-V0.8-1-g771d82e ____ _____ ____ _____ / __ \ / ____| _ \_ _| | | | |_ __ ___ _ __ | (___ | |_) || | | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_ \____/| .__/ \___|_| |_|_____/|____/_____| | | |_| Platform Name : T-HEAD Xuantie Platform Platform HART Features : RV64ACDFIMSUVX Platform Max HARTs : 1 Current Hart : 0 Firmware Base : 0x41fc0400 Firmware Size : 75 KB Runtime SBI Version : 0.2 MIDELEG : 0x0000000000000222 MEDELEG : 0x000000000000b1ff PMP0 : 0x0000000041fc0000-0x0000000041fdffff (A) PMP1 : 0x0000000040000000-0x000000007fffffff (A,R,W,X) PMP2 : 0x0000000080000000-0x00000000bfffffff (A,R,W,X) PMP3 : 0x0000000000020000-0x0000000000027fff (A,▒ U-Boot 2018.05-g2a1965a (Jul 10 2022 - 02:50:57 +0000) Allwinner Technology [00.305]DRAM: 64 MiB [00.307]Relocation Offset is: 01ed9000 [00.312]secure enable bit: 0 [00.314]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz MBus=300Mhz [00.321]flash init start [00.323]workmode = 0,storage type = 1 [00.326][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00 [00.332][mmc]: get sdc_type fail and use default host:tm1. [00.338][mmc]: can't find node "mmc0",will add new node [00.343][mmc]: fdt err returned <no error> [00.347][mmc]: Using default timing para [00.350][mmc]: SUNXI SDMMC Controller Version:0x50310 [00.369][mmc]: card_caps:0x3000000a [00.372][mmc]: host_caps:0x3000003f [00.376]sunxi flash init ok [00.378]line:703 init_clocks [00.381]drv_disp_init request pwm success, pwm7:pwm7:0x2000c00. fdt get node offset faill: hdmi [00.399]unable to map hdmi registers [00.402]drv_disp_init finish [00.412]Loading Environment from SUNXI_FLASH... OK [00.436]boot_gui_init:start [00.439]set disp.dev2_output_type fail. using defval=0 [00.446]boot_gui_init:finish partno erro : can't find partition bootloader 54 bytes read in 0 ms [00.456]bmp_name=bootlogo.bmp size 38454 38454 bytes read in 4 ms (9.2 MiB/s) [00.469]out of usb burn from boot: not need burn key [00.474]Item0 (Map) magic is bad [00.477]the secure storage item0 copy0 magic is bad [00.482]Item0 (Map) magic is bad [00.485]the secure storage item0 copy1 magic is bad [00.489]Item0 (Map) magic is bad List file under ULI/factory ** Unrecognized filesystem type ** root_partition is rootfs set root to /dev/mmcblk0p5 [00.504]update part info [00.507]update bootcmd [00.510]change working_fdt 0x42a98da0 to 0x42a78da0 disable nand error: FDT_ERR_BADPATH [00.519]The storage not support sample function No reserved memory region found in source FDT [00.544]update dts noncached_alloc(): addr = 0x42b02a40 noncached_alloc(): addr = 0x42b02a80 noncached_alloc(): addr = 0x42b02ac0 noncached_alloc(): addr = 0x42b03300 geth_sys_init:639: get node 'gmac0' error geth_sys_init fail! [00.564]Board Net Initialization Failed [00.568]No ethernet found. Hit any key to stop autoboot: 1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1 [00.636]LCD open finish 0 [01.970]no vendor_boot partition is found Android's image name: f133-mq_r Detect comp none [01.987] Starting kernel ... [01.989][mmc]: MMC Device 2 not found [01.993][mmc]: mmc 2 not find, so not exit [ 0.000000] Linux version 5.4.61 (furry@ubuntu) (riscv64-unknown-linux-gnu-gcc (C-SKY RISCV Tools V1.8.4 B20200702) 8.1.0, GNU ld (GNU Binutils) 2.32) #2 PREEMPT Sat Aug 5 09:13:12 UTC 2023 [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x0000000043ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] DMA32 zone: 224 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 16384 pages, LIFO batch:3 [ 0.000000] elf_hwcap is 0x20112d [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16160 [ 0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/mmcblk0p5 init=/pseudo_init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:private@mmcblk0p6:rootfs_data@mmcblk0p7:UDISK@mmcblk0p8 cma=0M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun20iw1p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05-g2a1965a(07/10/2022-02:50:57) mbr_o [ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000000] Sorting __ex_table... [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 55896K/65536K available (4125K kernel code, 402K rwdata, 1700K rodata, 136K init, 229K bss, 9640K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0 [ 0.000000] plic: mapped 200 interrupts with 1 handlers for 2 contexts. [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0] [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000026] riscv_timer_clockevent depends on broadcast, but no broadcast function available [ 0.000367] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000944] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000966] pid_max: default: 32768 minimum: 301 [ 0.001126] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.001142] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.002827] ASID allocator initialised with 65536 entries [ 0.003005] rcu: Hierarchical SRCU implementation. [ 0.003684] devtmpfs: initialized [ 0.021601] random: get_random_u32 called from bucket_table_alloc.isra.27+0x102/0x124 with crng_init=0 [ 0.022455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022487] futex hash table entries: 256 (order: 0, 6144 bytes, linear) [ 0.022631] pinctrl core: initialized pinctrl subsystem [ 0.024016] NET: Registered protocol family 16 [ 0.024747] DMA: preallocated 256 KiB pool for atomic allocations [ 0.025415] cpuidle: using governor menu [ 0.067528] rtc_ccu: sunxi ccu init OK [ 0.076164] clock: sunxi ccu init OK [ 0.078001] clock: sunxi ccu init OK [ 0.106923] iommu: Default domain type: Translated [ 0.107117] sunxi iommu: irq = 4 [ 0.108327] SCSI subsystem initialized [ 0.108571] usbcore: registered new interface driver usbfs [ 0.108662] usbcore: registered new interface driver hub [ 0.108771] usbcore: registered new device driver usb [ 0.109748] Advanced Linux Sound Architecture Driver Initialized. [ 0.111034] pwm module init! [ 0.112675] g2d 5410000.g2d: Adding to iommu group 0 [ 0.113189] G2D: rcq version initialized.major:252 [ 0.114202] clocksource: Switched to clocksource riscv_clocksource [ 0.128323] sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver [ 0.131669] NET: Registered protocol family 2 [ 0.132556] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.132597] TCP established hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.132614] TCP bind hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.132628] TCP: Hash tables configured (established 512 bind 512) [ 0.132774] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.132817] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.133044] NET: Registered protocol family 1 [ 0.134341] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator [ 0.134952] spi spi0: spi0 supply spi not found, using dummy regulator [ 0.135227] sunxi_spi_resource_get()2116 - [spi0] SPI MASTER MODE [ 0.135295] sunxi_spi_resource_get()2154 - Failed to get sample mode [ 0.135305] sunxi_spi_resource_get()2159 - Failed to get sample delay [ 0.135315] sunxi_spi_resource_get()2163 - sample_mode:-1431633921 sample_delay:-1431633921 [ 0.135382] sunxi_spi_clk_init()2205 - [spi0] mclk 100000000 [ 0.136219] sunxi_spi_probe()2623 - [spi0]: driver probe succeed, base ffffffd004058000, irq 31 [ 0.138363] workingset: timestamp_bits=62 max_order=14 bucket_order=0 [ 0.146618] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.146867] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.147204] fuse: init (API version 7.31) [ 0.168466] io scheduler mq-deadline registered [ 0.168482] io scheduler kyber registered [ 0.169392] [DISP]disp_module_init [ 0.170025] disp 5000000.disp: Adding to iommu group 0 [ 0.170612] [DISP] parser_disp_init_para,line:1430: [ 0.170618] of_property_read fb0_width fail [ 0.170638] [DISP] disp_init,line:2386: [ 0.170643] smooth display screen:0 type:1 mode:4 [ 0.211680] display_fb_request,fb_id:0 [ 0.219864] Freeing logo buffer memory: 1500K [ 0.220403] disp_al_manager_apply ouput_type:1 [ 0.220851] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pd not found, using dummy regulator [ 0.221658] [DISP]disp_module_init finish [ 0.222568] sunxi_sid_init()551 - insmod ok [ 0.223166] pwm-regulator: supplied by regulator-dummy [ 0.224985] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator [ 0.225467] uart uart0: uart0 supply uart not found, using dummy regulator [ 0.225934] uart0: ttyS0 at MMIO 0x2500000 (irq = 18, base_baud = 1500000) is a SUNXI [ 0.225965] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n [ 0.942802] printk: console [ttyS0] enabled [ 0.948735] misc dump reg init [ 0.953206] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator [ 0.964537] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9 [ 0.971752] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed [ 0.979093] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed [ 0.986565] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1) [ 0.993073] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power. [ 1.000065] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1) [ 1.007807] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1 [ 1.015732] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1 [ 1.023822] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled [ 1.031533] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power. [ 1.038365] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1) [ 1.045910] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0 [ 1.054134] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11 [ 1.061897] [ADDR_MGT] addr_mgt_probe: success. [ 1.068054] sunxi-spinand: AW SPINand MTD Layer Version: 2.3 20211223 [ 1.075300] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306 [ 1.087062] random: fast init done [ 1.352562] random: crng init done [ 2.074307] sunxi-spinand-phy: read id failed : -110 [ 2.079875] spi-nand: probe of spi0.0 failed with error -110 [ 2.086331] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.093639] sunxi-ehci: EHCI SUNXI driver [ 2.098616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.105589] sunxi-ohci: OHCI SUNXI driver [ 2.111347] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 2.122315] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 2.133077] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 2.144449] sunxi-rtc 7090000.rtc: registered as rtc0 [ 2.150118] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate! [ 2.160794] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T00:03:55 UTC (235) [ 2.169882] sunxi-rtc 7090000.rtc: sunxi rtc probed [ 2.175902] i2c /dev entries driver [ 2.179844] sunxi cedar version 1.1 [ 2.184016] sunxi-cedar 1c0e000.ve: Adding to iommu group 0 [ 2.190405] VE: install start!!! [ 2.190405] [ 2.195993] VE: cedar-ve the get irq is 6 [ 2.195993] [ 2.202328] VE: ve_debug_proc_info:00000000854c5cd8, data:000000005465e8fa, lock:00000000744b596e [ 2.202328] [ 2.213970] VE: install end!!! [ 2.213970] [ 2.219041] VE: sunxi_cedar_probe [ 2.223709] sunxi-wdt 6011000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.235283] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40) [ 2.245367] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8 [ 2.251540] sunxi-mmc 4020000.sdmmc: No vmmc regulator found [ 2.257974] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found [ 2.264413] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found [ 2.270818] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found [ 2.277380] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found [ 2.283884] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found [ 2.290419] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found [ 2.297484] sunxi-mmc 4020000.sdmmc: Got CD GPIO [ 2.302826] sunxi-mmc 4020000.sdmmc: set cd-gpios as 24M fail [ 2.309571] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.320718] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator [ 2.340916] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.365394] sunxi-mmc 4020000.sdmmc: detmode:gpio irq [ 2.371069] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.383432] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40) [ 2.393512] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8 [ 2.399853] sunxi-mmc 4021000.sdmmc: No vmmc regulator found [ 2.406241] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found [ 2.412728] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found [ 2.419191] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.430808] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found [ 2.437350] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found [ 2.443872] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found [ 2.450528] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found [ 2.457132] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed [ 2.466550] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.478416] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.489690] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator [ 2.499057] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.510685] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.535037] sunxi-mmc 4021000.sdmmc: detmode:manually by software [ 2.542881] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 2.550221] ashmem: initialized [ 2.553765] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !! [ 2.560691] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.572327] exFAT: Version 1.3.0 [ 2.579128] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B [ 2.592669] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1 [ 2.592669] [ 2.610123] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0 [ 2.621096] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.630692] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished [ 2.638898] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.645735] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 2.658052] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.664996] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B [ 2.676656] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.684048] sid_rd_ver_reg()254 - ver >= 4, soc ver:5 [ 2.689711] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !! [ 2.696551] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B [ 2.707850] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B [ 2.719619] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present! [ 2.729597] mmc0: new high speed SDXC card at address 211f [ 2.735861] [SNDCODEC][sunxi_card_init][583]:card init finished [ 2.745702] mmcblk0: mmc0:211f APPSD 125 GiB [ 2.751494] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok [ 2.765719] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input0 [ 2.777266] Alternate GPT is invalid, using primary GPT. [ 2.783261] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 2.789018] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished [ 2.799603] NET: Registered protocol family 10 [ 2.806373] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch [ 2.815250] Segment Routing with IPv6 [ 2.819541] NET: Registered protocol family 17 [ 2.848068] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator [ 2.862997] sunxi-i2c sunxi-i2c2: probe success [ 2.870404] sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator [ 2.884471] get ehci0-controller wakeup-source is fail. [ 2.890404] sunxi ehci0-controller don't init wakeup source [ 2.896725] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffffffe000661b28, 0x:ffffffd0040fa000, irq_no:2e [ 2.910231] [sunxi-ehci0]: Not init ehci0 [ 2.915276] get ohci0-controller wakeup-source is fail. [ 2.921220] sunxi ohci0-controller don't init wakeup source [ 2.927493] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffffffe000661ef0 [ 2.937948] [sunxi-ohci0]: Not init ohci0 [ 2.942952] get ehci1-controller wakeup-source is fail. [ 2.948987] sunxi ehci1-controller don't init wakeup source [ 2.955250] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffffffe0006622b8, 0x:ffffffd004835000, irq_no:31 [ 2.969156] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator [ 2.982745] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller [ 2.990017] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1 [ 2.999926] sunxi-ehci 4200000.ehci1-controller: irq 49, io mem 0x04200000 [ 3.034258] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00 [ 3.043129] hub 1-0:1.0: USB hub found [ 3.047490] hub 1-0:1.0: 1 port detected [ 3.053019] get ohci1-controller wakeup-source is fail. [ 3.059070] sunxi ohci1-controller don't init wakeup source [ 3.065413] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffffffe000662680 [ 3.076142] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator [ 3.088650] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller [ 3.095939] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2 [ 3.105804] sunxi-ohci 4200400.ohci1-controller: irq 50, io mem 0x04200400 [ 3.179307] hub 2-0:1.0: USB hub found [ 3.183587] hub 2-0:1.0: 1 port detected [ 3.191004] get usb_detect_mode is fail, -22 [ 3.195889] get det_vbus is fail, -84 [ 3.200003] get id is fail, -84 [ 3.206062] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.215793] clk: Not disabling unused clocks [ 3.220560] ALSA device list: [ 3.223863] #0: audiocodec [ 3.227157] cfg80211: failed to load regulatory.db [ 3.232590] alloc_fd: slot 0 not NULL! [ 3.242620] VFS: Mounted root (squashfs filesystem) readonly on device 179:5. [ 3.252508] devtmpfs: mounted [ 3.256091] Freeing unused kernel memory: 136K [ 3.261045] This architecture does not have kernel memory protection. [ 3.268383] Run /pseudo_init as init process mount: mounting none on /dev failed: Device or resource busy [ 3.890030] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support! [ 3.908590] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal ------run rc.preboot file----- [ 4.244309] [ 4.244309] insmod_device_driver [ 4.244309] [ 4.251552] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator [ 4.265832] device_chose finished 142!看起来像是文件系统的问题吗？
-
@whycanservice 明白了这个是在tf卡的资源，好像是我这个tf太大了导致加载比较慢。
-
Copyright © 2024 深圳全志在线有限公司 粤ICP备2021084185号 粤公网安备44030502007680号