@dingxmhan 大佬解决了吗，我也遇到同样问题

我也遇到了同样的问题
看这个贴子
https://bbs.aw-ol.com/topic/3749/sample_vi2venc2muxer-在v851s上崩溃

@tigger 谢了兄弟，但常见问题里我看见我这种问题，我尝试手动加载驱动

root@sipeed:~# modprobe xradio_wlan
[ 6650.755577] ======== XRADIO WIFI OPEN ========
[ 6650.760569] ieee80211_init failed (-12)!
modprobe: ERROR: could not insert 'xr829': Cannot allocate memory
[ 6652.046927] ======== XRADIO WIFI OPEN ========
[ 6652.051987] ieee80211_init failed (-12)!
modprobe: ERROR: could not insert 'xr829': Cannot allocate memory
root@sipeed:~# modprobe xr829
[ 6672.194738] ======== XRADIO WIFI OPEN ========
[ 6672.199701] ieee80211_init failed (-12)!
modprobe: ERROR: could not insert 'xr829': Cannot allocate memory
root@sipeed:~# 
root@sipeed:~# free -h
               total        used        free      shared  buff/cache   available
Mem:           992Mi       129Mi       692Mi       4.0Mi       171Mi       842Mi
Swap:             0B          0B          0B

root@sipeed:~# lsmod 
Module                  Size  Used by
xt_time                 3611  0
xt_multiport            2532  0
xt_mark                 1574  0
xt_mac                  1439  0
xt_limit                2828  0
xt_comment              1261  0
xt_TCPMSS               4100  0
xt_LOG                  1740  0
uvcvideo              128608  0
videobuf2_vmalloc       7487  1 uvcvideo
videobuf2_memops        1796  1 videobuf2_vmalloc
iptable_filter          1804  0
ipt_REJECT              2687  0
fuse                  152485  1

@xiaowenge 是Debian by Sipeed 的系统，sipeed淘宝店买的，买的套餐里带的系统

环境

• 硬件：淘宝官方店，哪吒D1开发板，标准套餐
• 软件：出厂系统

问题

刚拿到手的板子

插上带有出厂系统的sd卡，启动进入系统后ifcofnig -a 看不见wlan0

root@sipeed:~# ifconfig -a
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether da:76:5d:c1:dc:73  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 62  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 8  bytes 400 (400.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 400 (400.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

sit0: flags=128<NOARP>  mtu 1480
        sit  txqueuelen 1000  (IPv6-in-IPv4)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

使用dmesg查看信息发现有错误

[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[   12.752874] systemd-journald[97]: Failed to read journal file /var/log/journal/d6cf2e6523464ceab62681de06d93957/user-1000.journal for rotation, trying to move it out of the way: Text file busy
[  OK  ] Reached target Hardware activated USB gadget.
[   14.208719] ======== XRADIO WIFI OPEN ========
[   14.257684] ieee80211_init failed (-12)!
[   14.527369] usbcore: registered new interface driver uvcvideo
[   14.655469] USB Video Class driver (1.1.1)
[   14.844483] xt_time: kernel timezone is -0000
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Finished Helper to synchronize boot up for ifupdown.
[  OK  ] Listening on Load/Save RF ??itch Status /dev/rfkill Watch.
         Starting Load Kernel Modules...
         Starting Load/Save RF Kill Switch Status...
[   15.753880] sunxi-rfkill soc@3000000:rfkill@0: block state already is 1
[  OK  ] Started Load/Save RF Kill Switch Status.
[   16.964979] ======== XRADIO WIFI OPEN ========
[   16.969944] ieee80211_init failed (-12)!
[   17.054932] Error: Driver 'gt9xxnew_ts' is already registered, aborting...
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
         Starting Apply Kernel Variables...
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Periodic ext4 Onli??ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Save/Restore Sound Card State...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting Connection service...

兄弟们帮忙看看，是不是硬件有问题