全志在线开发者论坛

QY157

V821 怎么在编译好的文件系统里增加或修改自己的配置文件，相当于overlayrootfs

QY157

WARNING: Logging before InitGoogleLogging() is written to STDERR
I0101 04:05:44.877432 490 play.c:411] <main2> Hello, sample_ao!
I0101 04:05:44.880457 490 play.c:347] <loadSampleAOConfig> param: pcmFilePath[/mnt/UDISK/test.wav], sampleRate[44100], channelCount[2], bitWidth[16], frameSize[1024], aoVolume[90], aoSoftVolume[60]
I0101 04:05:44.883114 490 play.c:48] <ParseWavHeader> Be careful! wav header has chunk:[0x5453494c], size:26, skip
I0101 04:05:44.886113 490 play.c:469] <main2> parse wav header size:78, ChnNum[2], SampleRate[44100], BitsPerSample[16]
I0101 04:05:44.887240 490 mpi_sys.c:854] <AW_MPI_SYS_SetConf> kfctmpdir is [/tmp]
I0101 04:05:44.897525 490 mpi_sys.c:1505] <AW_MPI_SYS_Init> ISP init
I0101 04:05:44.898756 490 isp_version.h:32] <isp_version_info> [ISP]>>>>>>>>>>>>>>>>>>>> ISP VERSION INFO <<<<<<<<<<<<<<<<<<<
IPCORE: ISP603
branch: libisp-dev
commit: 85909eef135a0108ea1214df4886d6c741a71c39
date : Tue May 27 18:59:00 2025 +0800
author: mayifei@allwinnertech.com

I0101 04:05:44.903154 490 mpi_sys.c:1507] <AW_MPI_SYS_Init> ISP init done
I0101 04:05:44.903994 490 hwdisplay.c:84] <hw_display_init>
I0101 04:05:44.904516 490 hwdisplay.c:1020] <hwd_init> (hwd_init 1020)
E0101 04:05:45.407127 490 hwdisplay.c:1013] <tryOpenDev> fatal error! open dev[/dev/disp] fail. error[2-No such file or directory]!
E0101 04:05:45.409490 490 hwdisplay.c:1030] <hwd_init> fatal error! Failed to open disp device
E0101 04:05:45.411430 490 mpi_vo.c:382] <VO_Construct> fatal error! hw display init fail!
E0101 04:05:45.412406 490 mpi_sys.c:1554] <AW_MPI_SYS_Init> VO Construct error!
I0101 04:05:45.433770 490 audio_hw.c:198] <MakeAllMixerElemsAvailable> pcm open and close, all MixerElems maybe exist.
I0101 04:05:45.434882 490 alsa_interface.c:736] <alsaOpenMixer> open mixer:hw:0
I0101 04:05:45.437875 490 alsa_interface.c:792] <alsaOpenMixer> set playback vol_val to value: 27, mppValue:87
I0101 04:05:45.439026 490 alsa_interface.c:805] <alsaOpenMixer> set playback soft_vol val to value: 130, mppValue:0
I0101 04:05:45.439966 490 alsa_interface.c:736] <alsaOpenMixer> open mixer:hw:1
E0101 04:05:45.441201 490 alsa_interface.c:748] <alsaOpenMixer> Mixer hw:1 attach error: No such file or directory
E0101 04:05:45.444337 490 audio_hw.c:306] <audioHw_Construct> AIO device 1 open mixer failed!
I0101 04:05:45.448022 490 AOChannel_Component.c:1386] <AOChannel_ComponentInit> create AOChannel threadId[0xb6abb3a0]
I0101 04:05:45.449174 490 play.c:503] <main2> create ao channel[0] success!
I0101 04:05:45.450489 490 alsa_interface.c:1126] <alsaMixerGetVolume> playback getVolume:27, mppValue:87, err:0
I0101 04:05:45.451532 490 play.c:605] <main2> Get Ao Volume:87, set:90
I0101 04:05:45.452454 490 alsa_interface.c:1092] <alsaMixerSetVolume> snd_card:0, elem_name:LINEOUT Gain, playback setVolume:27, mppValue:90, err:0
E0101 04:05:45.453406 490 alsa_interface.c:1162] <alsaMixerSetSoftVolume> want to setAIOSoftVol[-52,50], playFlag[1], but usr value=60 is invalid!
I0101 04:05:45.454409 490 play.c:609] <main2> Set Ao SoftVolume:60
I0101 04:05:45.459268 493 AOChannel_Component.c:2034] <AOChannel_ComponentThread> AO get first pcm from ADec, nBufferLen: 4096, nTimeStamp:0us, param[44100-1-1],use it to init AudioRenderHal
I0101 04:05:45.460340 493 AOChannel_Component.c:2049] <AOChannel_ComponentThread> audioDev[0-0] is not config, config it now, [0-44100-1-2]
E0101 04:05:45.461477 493 audio_hw.c:1614] <audioHw_AO_SetChnPubAttr> ao_set_attr_chl:0,stat:0
I0101 04:05:45.461312 492 mpi_sys.c:1085] <MonitorEnvVarThread> detect user environment:
I0101 04:05:45.463076 492 mpi_sys.c:1086] <MonitorEnvVarThread> /tmp/mpp_log_level
I0101 04:05:45.463754 492 mpi_sys.c:1087] <MonitorEnvVarThread> /tmp/mpp_venc_sei_config_param
I0101 04:05:45.462539 493 AOChannel_Component.c:2056] <AOChannel_ComponentThread> audioDev[0-0] is not start, start it now
E0101 04:05:45.465061 493 audio_hw.c:1709] <audioHw_AO_EnableChn> ao_enable_chl:0-0
W0101 04:05:45.465526 493 audio_hw.c:1758] <audioHw_AO_EnableChn> params of play_daudio0 chn[0] [44100-2-2646] don't matter now. asound.conf make sure same to PlaybackRateDmix
I0101 04:05:45.466553 493 alsa_interface.c:492] <alsaOpenPcm> open pcm! card:[I2STX], pcmFlag:1
ALSA lib pcm_hw.c:1822:(_snd_pcm_hw_open) Invalid value for card
E0101 04:05:45.474079 493 alsa_interface.c:504] <alsaOpenPcm> fatal error! card[I2STX] audio open error: No such device
E0101 04:05:45.475322 493 audio_hw.c:1795] <audioHw_AO_EnableChn> fatal error! daudio0 open_pcm failed, ch:0
I0101 04:05:45.478526 493 AOChannel_Component.c:2060] <AOChannel_ComponentThread> audio render hal init and run ok:0!
E0101 04:05:45.479985 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.481732 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.483016 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.484220 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.485244 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.486320 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.487200 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:45.488029 493 AOChannel_Component.c:2242] <AOChannel_ComponentThrea
E0101 04:05:46.076803 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.077981 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.079810 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.081652 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.083474 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
I0101 04:05:46.084648 490 play.c:652] <main2> read file finish! last read [2720]bytes
W0101 04:05:46.084874 490 mpi_ao.c:877] <AW_MPI_AO_SetStreamEof> warning! ao dev was not started!
I0101 04:05:46.085012 490 AOChannel_Component.c:185] <AOSetStreamEof> AO end flag is set! drain pcm flag:1!
E0101 04:05:46.085162 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.086092 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.086403 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.087456 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
E0101 04:05:46.089085 493 AOChannel_Component.c:2242] <AOChannel_ComponentThread> fatal error! send to alsaLib fail[0xa0168005], but still release frame
W0101 04:05:46.089367 493 AOChannel_Component.c:2107] <AOChannel_ComponentThread> Be careful! aoChn[0-0] no node in UsedList?! privFlag[0x2], drainPostDataFlag:0
I0101 04:05:46.090322 493 AOChannel_Component.c:2159] <AOChannel_ComponentThread> Be careful! we need create empty audio frame[1-1-44100] to drain postData!
I0101 04:05:46.090505 493 AOChannel_Component.c:2253] <AOChannel_ComponentThread> Be careful! maybe drain post datalen[0], flag:1!
I0101 04:05:46.091361 493 AOChannel_Component.c:1992] <AOChannel_ComponentThread> A. AOChn[0-0] notify player eof!
I0101 04:05:46.091555 493 AOChannel_Component.c:1995] <AOChannel_ComponentThread> AOChn[0-0] drain pcm ring buf!
E0101 04:05:46.092636 493 AOChannel_Component.c:2004] <AOChannel_ComponentThread> fatal error! AOChn[0-0] is not start, so do not drain!
I0101 04:05:46.093917 493 AOChannel_Component.c:2008] <AOChannel_ComponentThread> AOChn[0-0] drain pcm ring buf done, cost[1]ms!
I0101 04:05:46.094095 493 play.c:267] <SampleAOCallbackWrapper> AO channel notify APP that play complete!
I0101 04:05:46.095027 493 AOChannel_Component.c:1939] <AOChannel_ComponentThread> AO EOF!

I0101 04:05:49.547520 494 play.c:399] <volumeAdjustThread> unknow cmd:
!
I0101 04:05:49.547703 494 play.c:400] <volumeAdjustThread> help: setvol/mute x for set volume/mute
I0101 04:05:49.547774 494 play.c:401] <volumeAdjustThread> getvol/mute for get volume/mute value
W0101 04:05:49.563646 490 mpi_ao.c:490] <AW_MPI_AO_StopChn> Be careful! aoChn[0-0] is not start
W0101 04:05:49.564628 490 mpi_ao.c:308] <AW_MPI_AO_DestroyChn> Be careful! aoChn[0-0] is not start
I0101 04:05:49.564937 493 AOChannel_Component.c:1791] <AOChannel_ComponentThread> release all frames to ADec, when state[0x2]->[0x1]
I0101 04:05:49.565807 490 AOChannel_Component.c:1118] <AOChannel_ComponentDeInit> wait AO channel component exit!...
I0101 04:05:49.567048 490 AOChannel_Component.c:1215] <AOChannel_ComponentDeInit> AO component exited!
I0101 04:05:49.568072 490 alsa_interface.c:839] <alsaCloseMixer> close mixer[0x36f544].card_id:0
I0101 04:05:49.568470 490 mpi_vo.c:408] <VO_Destruct> already destruct vo
I0101 04:05:49.570005 492 mpi_sys.c:1097] <MonitorEnvVarThread> MonitorEnvVar thread receive stop command, cur sys state is:2
I0101 04:05:49.571155 490 play.c:710] <main2> success test result.

QY157

@awwwwa 问题解决了，非常感谢

QY157

@awwwwa de29abdf-9630-4c39-ae8d-479fc43b7c0a-cd171663-a1c8-4c51-93b5-dab71e7e8a3e.png 1aa7bd61-ac8b-4b68-a8e6-28aebe163d44-2c162759-0502-449c-a0de-b569918bb19c.png ubuntu20.04，按照上面的方法进行编译，编译成功后输出的居然还是nor的镜像 14407fc4-d449-4d77-81cb-45c78849ac87-7a81ff97-4da0-47b9-99b6-633ed166a70d.png 这是怎么回事啊？

QY157

@awwwwa 好的我试试先

QY157

@awwwwa 你用的哪个版型编译的？

QY157

@awwwwa 能把你的board.dts 发出来吗？你除了使用quick_config配置之外还有别的改动吗？我看了下dts 好像不太对劲， spi0好像都没有nand的节点，

 &spi0 {
	pinctrl-0 = <&spi0_pins_default &spi0_pins_cs>;
	pinctrl-1 = <&spi0_pins_sleep>;
	pinctrl-names = "default", "sleep";
	sunxi,spi-bus-mode = <SUNXI_SPI_BUS_NOR>;
	sunxi,spi-cs-mode = <SUNXI_SPI_CS_SOFT>;
	status = "okay";

	dmas;
	dma-names;
	spi_board0 {
		device_type = "spi_board0";
		compatible = "spi-nor";
		spi-max-frequency = <100000000>;
		m25p,fast-read = <1>;
		/*individual_lock;*/
		reg = <0x0>;
		spi-rx-bus-width = <4>;
		spi-tx-bus-width = <4>;
		status = "disabled";
	};
};

QY157

@awwwwa 我这个SDK应该部是最新的，造成的，我看这颗物料的更新是7月30日，而我的SDK是6月份的，应该是SDK的问题了，能发我一份SDK吗？

QY157

@awwwwa 是用quick_config配置编译的吗？你的SDK是哪个版本是1.2吗？能否发我一份

QY157

@awwwwa Waiting for root device /dev/ubiblock0_7 中 ubiblock0_7 名字是否正确，是不是因为这个名字错了，无法进入文件系统的情况下怎么查看这个名字，在uboot中能查看吗？

QY157

@awwwwa 重新 make distclean 并且重新quick_config 还是一样的问题，这个要怎么解决呢？

QY157

@winner_fornm

main_enable = 1 #0:disable main stream, 1:enable main stream
main_rtsp_id = 0 #-1:disable main rtsp

是这些吗？只要保证主码流有不就行吗？

QY157

@awwwwa 是的

QY157

日志如下：

[0]HELLO! BOOT0 is starting!
[0]BOOT0 commit : 
[0]set pll start
[1]set pll end
[1]reset_src: rtc wdg rst
[2]reset_src: det rst
[2]reset_src: pwron rst
[3]board init ok: use hosc 40M
[4]mode:0x1 sample delay:0xf
[4]OperationOpt:7 
[4]spinand quad mode error
[4]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32
[5]BOOT_PARAM_OFFSET:0x500000 
[6]boot param - magic error
[6]DRAM use internal ZQ!!
[7]ZQ value = 0x30
[7]DRAM BOOT DRIVE INFO: V1.02
[7]DRAM CLK = 520 MHz
[7]DRAM Type = 2 (2:DDR2,3:DDR3)
[7]DRAMC read ODT off.
[8]DRAM ODT off.
[8]ddr_clk0 = 1040 MHz
[9]trefi: 7.8us
[9]DRAM Size = 64 MB
[11]DRAM simple test OK.
[11]dram size =64
[11]mode:0x1 sample delay:0xf
[11]OperationOpt:7 
[11]spinand quad mode error
[12]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32
[12]mode:0x1 sample delay:0xf
[12]OperationOpt:7 
[13]spinand quad mode error
[13]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32
[13]block from 8 to 32
[141]Check is correct. Find a good uboot copy at block 8
[142]dma 0x2009c7c int is not used yet
[142]dma 0x2009c7c int is free, you do not need to free it again
[142]Entry_name        = opensbi
[143]Entry_name        = u-boot
[145]Entry_name        = melis-elf
[148]Jump to OpenSBI: opensbi_base = 0x80fc0000, dtb_base = 0x0, uboot_base = 0x82000000

OpenSBI 92310c8ed361641fa38c20bd0073be189e0f1282
   ____                    _____ ____ _____
  / __ \                  / ____|  _ \_   _|
 | |  | |_ __   ___ _ __ | (___ | |_) || |
 | |  | | '_ \ / _ \ '_ \ \___ \|  _ < | |
 | |__| | |_) |  __/ | | |____) | |_) || |_
  \____/| .__/ \___|_| |_|_____/|____/_____|
        | |
        |_|

init msb region pma attribute
Platform Name             : sun300iw1
Platform Features         : medeleg
Platform HART Count       : 1
Platform IPI Device       : sunxi_plicsw
Platform Timer Device     : sunxi_plmt @ 40000000Hz
Platform Console Device   : sunxi_uart
Platform HSM Device       : ---
Platform PMU Device       : ---
Platform Reboot Device    : sunxi_wdt
Platform Shutdown Device  : sunxi_wdt
Firmware Base             : 0x80fc0400
Firmware Size             : 75 KB
Runtime SBI Version       : 0.3

Domain0 Name              : root
Domain0 Boot HART         : 0
Domain0 HARTs             : 0*
Domain0 Region00          : 0x80fc0000-0x80fdffff ()
Domain0 Region01          : 0x00000000-0xffffffff (R,W,X)
Domain0 Next Address      : 0x82000000
Domain0 Next Arg1         : 0x00000000
Domain0 Next Mode         : S-mode
Domain0 SysReset          : yes

Boot HART ID              : 0
Boot HART Domain          : root
Boot HART ISA             : rv32imafdcnsux
Boot HART Features        : scounteren,mcounteren,mcountinhibit,sscofpmf
Boot HART PMP Count       : 64
Boot HART PMP Granularity : 8
Boot HART PMP Address Bits: 31
Boot HART MHPM Count      : 4
Boot HART MIDELEG         : 0x00000222
Boot HART MEDELEG         : 0x0000b109


U-Boot 2018.07 (Aug 15 2025 - 10:41:44 +0800) Allwinner Technology

I2C:   ready
[00.162]DRAM:  64 MiB
[00.163]Relocation Offset is: 01f23000, reloc addr is: 83f23000
[00.165]secure enable bit: 0
[00.165]drivers/sunxi_power/pmu_axpnull.c pmu_axpnull_probe 26 axpdummy probe
FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
[00.167]axp2601 pmic_bus_read fail
[00.167]BMU: AXPNULL
[00.168]CPU=960 MHz,PERI=3072 Mhz,AHB=192 Mhz, APB=96Mhz
SPI ALL:   ready
[00.170]flash init start
[00.171]workmode = 0,storage type = 0
[00.177]sunxi-spinand-phy: spinand sample_mode:1 sample_delay:f

device nand0 <nand>, # parts = 4
 #: name		size		offset		mask_flags
 0: boot0               0x00100000	0x00000000	1
 1: uboot               0x00300000	0x00100000	1
 2: secure_storage      0x00100000	0x00400000	1
 3: sys                 0x07b00000	0x00500000	0

active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000

defaults:
mtdids  : nand0=nand
mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys)
[00.330]ubi0: attaching mtd4
[00.926]ubi0: scanning is finished
[00.934]ubi0: attached mtd4 (name "sys", size 123 MiB)
[00.935]ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[00.935]ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[00.936]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[00.936]ubi0: good PEBs: 980, bad PEBs: 4, corrupted PEBs: 0
[00.936]ubi0: user volume: 10, internal volumes: 1, max. volumes count: 128
[00.937]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
[00.938]ubi0: available PEBs: 0, total reserved PEBs: 980, PEBs reserved for bad PEB handling: 16
[00.938]sunxi flash init ok
[01.194]Loading Environment from SUNXI_FLASH... OK
[01.235]usb burn from boot
delay time 0
[01.244]usb prepare ok
[01.545]overtime
[01.548]do_burn_from_boot usb : no usb exist
List file under ULI/factory
** Unrecognized filesystem type **
[01.575]update bootcmd
[01.609]change working_fdt 0x838e2ea0 to 0x838c2ea0
[01.617]## error: update_fdt_dram_para : FDT_ERR_NOTFOUND
[01.619]update dts
Info: gmac phy mode = rmii, phy_interface = 6
FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
Error: gmac set pin failed
[01.623]Board Net Initialization Failed
[01.623]No ethernet found.
Hit any key to stop autoboot:  0 
[02.238]no vendor_boot partition is found
Android's image name: sun300i_riscv32
Detect comp gzip
ERROR: reserving fdt memory region failed (addr=80ffff00 size=100)
[02.465]
Starting kernel ...

[    0.000000] Linux version 5.4.220 (yinqi@yinqi) (gcc version 10.4.0 (2024-02-02_nds32le-linux-glibc-v5d-bbc31ec98)) #2 PREEMPT Fri Aug 15 10:48:09 CST 2025
[    0.000000] printk: bootconsole [earlycon0] enabled
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000083c00000, size 4 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000081200000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node vdev0buffer@81200000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000081646000, size 0 MiB
[    0.000000] OF: reserved mem: initialized node e907_rpbuf@81646000, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x0000000080ffefff]
[    0.000000]   node   0: [mem 0x0000000081244000-0x0000000081643fff]
[    0.000000]   node   0: [mem 0x000000008164e000-0x0000000083ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000083ffffff]
[    0.000000] On node 0 totalpages: 15793
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 15793 pages, LIFO batch:3
[    0.000000] SBI specification v0.3 detected
[    0.000000] SBI implementation ID=0x1 Version=0x10000
[    0.000000] SBI v0.2 TIME extension detected
[    0.000000] SBI v0.2 IPI extension detected
[    0.000000] SBI v0.2 RFENCE extension detected
[    0.000000] SBI SRST extension detected
[    0.000000] riscv: base ISA extensions acdfim
[    0.000000] riscv: ELF capabilities acdfim
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 15665
[    0.000000] Kernel command line: ubi.mtd=sys ubi.block=0,rootfs earlyprintk=sunxi-uart,0x42500000 initcall_debug=0 console=ttyS0,1500000 loglevel=8 root=/dev/ubiblock0_7 rootwait rootfstype=squashfs init=/init rdinit=/rdinit partitions=mbr@ubi0_0:boot-resource@ubi0_1:env@ubi0_2:env-redund@ubi0_3:boot@ubi0_4:private@ubi0_5:riscv0@ubi0_6:rootfs@ubi0_7:rootfs_data@ubi0_8:UDISK@ubi0_9: cma=1M snum=7c000c71a300c822250 mac_addr= wifi_mac=60:c2:2a:12:48:6f bt_mac= selinux=0 specialstr= gpt=1 arm-smmu-v3.disable_bypass=0 androidboot.serialno=7c000c71a300c822250 androidboot.hardware=sun300iw1p1 boot_type=5 androidboot.boot_type=5 gpt=1 uboot_message=2018.07(08/15/2025-10:41:44) mbr_offset=1032192 bootreason=button aw-ubi-spinand.ubootblks=24 androidboot.dramfreq=520 androidboot.dramsize=64 mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys) uboot_backup=ubootA 
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Sorting __ex_table...
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 27108K/63172K available (5310K kernel code, 432K rwdata, 2008K rodata, 168K init, 345K bss, 31968K reserved, 4096K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] NR_IRQS: 72, nr_irqs: 72, preallocated irqs: 0
[    0.000000] plic: mapped 187 interrupts with 1 handlers for 2 contexts.
[    0.000000] sunxi:ccu-ng:[INFO]: Current HOSC rate is 40000000HZ
[    0.000000] AW BSP version: UNKNOWN, 2025-08-15 10:48:03
[    0.000000] sunxi:ccu-ng:[INFO]: aon_ccu: sunxi ccu init OK
[    0.000000] sunxi:ccu-ng:[INFO]: sunxi ccu common driver version: 1.2.4
[    0.000000] sunxi:ccu-ng:[INFO]: ccu: sunxi ccu init OK
[    0.000000] sunxi:ccu-ng:[INFO]: sunxi app ccu driver version: 0.7.2
[    0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[    0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x939a85c40, max_idle_ns: 440795202120 ns
[    0.000011] sched_clock: 64 bits at 40MHz, resolution 25ns, wraps every 4398046511100ns
[    0.001079] Console: colour dummy device 80x25
[    0.001158] Calibrating delay loop (skipped), value calculated using timer frequency.. 80.00 BogoMIPS (lpj=160000)
[    0.001799] pid_max: default: 32768 minimum: 301
[    0.002388] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002723] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.005662] rcu: Hierarchical SRCU implementation.
[    0.011077] devtmpfs: initialized
[    0.032057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.032410] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.033279] pinctrl core: initialized pinctrl subsystem
[    0.041638] phys:80000000 low vir:c0000000 non-cache:dfc80000~e3c80000
[    0.042819] NET: Registered protocol family 16
[    0.048151] sunxi:ccu-ng:[INFO]: sunxi prcm ccu driver version: 0.0.4
[    0.056385] sunxi:pin-42000000.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
[    0.056634] sunxi:pin:[INFO]: sunxi pinctrl core driver version: 1.4.8
[    0.057827] sunxi:pin:[INFO]: sunxi rtc-pinctrl version: 0.0.2
[    0.060225] sunxi:pin-42000540.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
[    0.064663] sunxi hwspinlock vbase:0x(ptrval)
[    0.094655] SCSI subsystem initialized
[    0.095049] usbcore: registered new interface driver usbfs
[    0.095159] usbcore: registered new interface driver hub
[    0.095544] usbcore: registered new device driver usb
[    0.095997] mc: Linux media interface: v0.10
[    0.096236] videodev: Linux video capture interface: v2.00
[    0.097469] Advanced Linux Sound Architecture Driver Initialized.
[    0.103063] sun6i-dma 43002000.dma-controller: sunxi dma probed, driver version: 1.2.11
[    0.105049] sunxi-soc-regulator 4a000800.soc_pmu0: Supply for ldo1 (ldo1) resolved to itself
[    0.105290] ldo1: supplied by regulator-dummy
[    0.106476] ion_size_pool heap_size_pool@0: no small_source configurated, use cma as default
[    0.108467] sunxi:pin-42000000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
[    0.109089] sunxi-twi 42502000.twi0: 42502000.twi0 supply twi not found, using dummy regulator
[    0.110457] sunxi:twi-42502000.twi0:[INFO]: v2.7.9 probe success
[    0.111516] sunxi:pwm-42000c00.pwm:[INFO]: start probe
[    0.112199] sunxi:pwm-42000c00.pwm:[INFO]: pwmchip probe success
[    0.114694] clocksource: Switched to clocksource riscv_clocksource
[    0.119503] thermal_sys: Registered thermal governor 'fair_share'
[    0.119512] thermal_sys: Registered thermal governor 'bang_bang'
[    0.119568] thermal_sys: Registered thermal governor 'step_wise'
[    0.120057] thermal_sys: Registered thermal governor 'user_space'
[    0.120486] thermal_sys: Registered thermal governor 'power_allocator'
[    0.121571] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.123059] sunxi_usb_udc 44100000.udc-controller: sunxi:sunxi_usb_udc UDC Inner DMA Feature - wordaddr: -1, extend: disabled
[    0.124488] NET: Registered protocol family 2
[    0.124847] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.126023] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.126286] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.126967] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.127389] TCP: Hash tables configured (established 1024 bind 1024)
[    0.128035] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.128379] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.129190] NET: Registered protocol family 1
[    0.130036] RPC: Registered named UNIX socket transport module.
[    0.130079] RPC: Registered udp transport module.
[    0.130438] RPC: Registered tcp transport module.
[    0.130942] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.132161] sunxi:spi-44025000.spi:[INFO]: spi manual set sample type_1, mode_1, delay_15
[    0.132441] sunxi-spi-ng 44025000.spi: 44025000.spi supply spi not found, using dummy regulator
[    0.133298] sunxi:spi-44025000.spi:[INFO]: bus num_0 mode_16 freq_100000000
[    0.133573] sunxi:spi-44025000.spi:[INFO]: cs num_1 mode_1
[    0.134045] of_dma_request_slave_channel: dma-names property of node '/soc@2002000/spi@44025000' missing or empty
[    0.134926] sunxi:spi-44025000.spi:[ERR]: failed to request dma tx channel -19
[    0.135557] sunxi:spi-44025000.spi:[WARN]: clk 100000000 not support, round to nearly 78769230
[    0.136648] sunxi:spi-44025000.spi:[INFO]: probe success (Version 2.5.4)
[    0.140353] workingset: timestamp_bits=30 max_order=13 bucket_order=0
[    0.153175] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.154617] NFS: Registering the id_resolver key type
[    0.154885] Key type id_resolver registered
[    0.154913] Key type id_legacy registered
[    0.155244] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.155757] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.156672] fuse: init (API version 7.31)
[    0.158230] NET: Registered protocol family 38
[    0.158328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.158803] io scheduler mq-deadline registered
[    0.159071] io scheduler kyber registered
[    0.182643] loop: module loaded
[    0.183676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.183832] ehci-platform: EHCI generic platform driver
[    0.184643] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.184758] ohci-platform: OHCI generic platform driver
[    0.186474] usbcore: registered new interface driver uas
[    0.186604] usbcore: registered new interface driver usb-storage
[    0.187135] i2c /dev entries driver
[    0.188465] usbcore: registered new interface driver usbhid
[    0.188499] usbhid: USB HID core driver
[    0.190424] uart-ng uart-ng0: uart-ng0 supply uart not found, using dummy regulator
[    0.190929] sunxi:uart-ng-uart-ng0:[INFO]: cannot get the TX DMA channel!
[    0.191121] sunxi:uart-ng-uart-ng0:[INFO]: cannot get the RX DMA channel!
[    0.191728] sunxi:uart-ng:[INFO]: sunxi uart-ng driver version: 1.1.10
[    0.192184] uart-ng0: ttyS0 at MMIO 0x42500000 (irq = 134, base_baud = 12000000) is a SUNXI
[    0.192818] sunxi:uart-ng-uart-ng0:[INFO]: console setup baud 1500000 parity n bits 8, flow n
[    0.193443] sunxi:uart-ng-uart-ng0:[INFO]: uart0, select set 6, baud 1500000, uartclk 192000000 beyond rance[24000000, 120000000]
[    0.194407] printk: console [ttyS0] enabled
[    0.194407] printk: console [ttyS0] enabled
[    0.195353] printk: bootconsole [earlycon0] disabled
[    0.195353] printk: bootconsole [earlycon0] disabled
[    0.197491] sunxi:rtc-4a000c00.rtc:[WARN]: Fail to get clock 'rtc-1k'
[    0.198340] sunxi:rtc-4a000c00.rtc:[WARN]: Fail to get clock 'rtc-spi'
[    0.199297] sunxi:rtc:[INFO]:  Saving SoC boot-reason: COLD-BOOT
[    0.200052] sunxi:rtc-4a000c00.rtc:[INFO]: errata__fix_alarm_day_reg_default_value(): ALARM0_DAY_REG=0, set it to 1
[    0.201334] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.202587] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.204182] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.205429] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.206657] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.208574] sunxi-rtc 4a000c00.rtc: registered as rtc0
[    0.209276] sunxi:rtc_sun300iw1_frun_counter:[ERR]: rtc_frun_counter_init(83): rtc frun counter src not from extern32k osc
[    0.210620] sunxi:rtc-4a000c00.rtc:[WARN]: clocksource not work: rtc free running counter
[    0.211673] sunxi:rtc-4a000c00.rtc:[INFO]: sunxi rtc probed
[    0.214209] sunxi-wdt 4a001000.watchdog: Watchdog enabled (timeout=300 sec, nowayout=0), driver version: 1.0.5
[    0.217946] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: SD/MMC/SDIO Host Controller Driver(v5.55 2024-08-26 15:32)
[    0.219496] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: ctl-spec-caps 8
[    0.220385] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vmmc regulator found
[    0.221294] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vqmmc regulator found
[    0.222196] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vdmmc regulator found
[    0.223120] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vd33sw regulator found
[    0.224027] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vd18sw regulator found
[    0.224935] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vq33sw regulator found
[    0.225847] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: No vq18sw regulator found
[    0.226781] sunxi:sunxi_mmc_host-44020000.sdmmc:[ERR]: manual set ocr
[    0.227585] sunxi:sunxi_mmc_host-44020000.sdmmc:[WARN]: Cann't get pin bias hs pinstate,check if needed
[    0.228831] sunxi:sunxi_mmc_host-44020000.sdmmc:[ERR]: Could not get store clock
[    0.229760] sunxi:sunxi_mmc_host-44020000.sdmmc:[ERR]: Could not get msi_lite clock
[    0.231262] sunxi-mmc 44020000.sdmmc: Got CD GPIO
[    0.231985] sunxi-mmc 44020000.sdmmc: sunxi:sunxi_mmc_hostcd-set-debounce is missing, function is no used
[    0.233806] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    0.247734] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    0.262047] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: detmode:gpio irq
[    0.265212] sunxi:g2d_sunxi:[INFO]: [G2D]: rcq version initialized.major:245
[    0.266098] sunxi:g2d_sunxi:[INFO]: [G2D]: g2d_module_init
[    0.267974] sunxi:gpadc:[INFO]: sunxi_gpadc_init(): 2148: gpadc class register success
[    0.269444] sunxi:gpadc-42009000.gpadc0:[WARN]: warn: sample rate not set
[    0.270781] input: sunxi-gpadc0/channel0/input0 as /devices/platform/soc@2002000/42009000.gpadc0/input/input0
[    0.272603] input: sunxi-gpadc0/channel1/input0 as /devices/platform/soc@2002000/42009000.gpadc0/input/input1
[    0.274629] sunxi:gpadc-42009000.gpadc0:[INFO]: sunxi_gpadc probe success
[    0.281842] sunxi-msgbox 43033000.msgbox: sunxi:sunxi_msgboxsunxi_msgbox_probe(): sunxi msgbox start probe
[    0.283401] sunxi-msgbox 43033000.msgbox: sunxi:sunxi_msgboxsunxi_msgbox_probe(): sunxi msgbox probe success
[    0.285972] sunxi-rproc 43030000.e907_rproc: sunxi rproc driver 2.4.3
[    0.287102] sunxi-rproc 43030000.e907_rproc: rv-cfg base: 0x43030000, va: 0xdfc43000
[    0.288137] sunxi-rproc 43030000.e907_rproc: find rproc standby error
[    0.289201] sunxi-rproc 43030000.e907_rproc: timeout_ms: 6000
[    0.289932] sunxi-rproc 43030000.e907_rproc: reset_type: 2
[    0.290599] sunxi-rproc 43030000.e907_rproc: reg:        43031000
[    0.291480] sunxi-rproc 43030000.e907_rproc: irq_num:    163
[    0.292191] sunxi-rproc 43030000.e907_rproc: panic_on_timeout: 1
[    0.293223] sunxi-rproc 43030000.e907_rproc: The bootloader doesn't boot up the remoteproc when auto-boot is enabled!
[    0.294531] sunxi-rproc 43030000.e907_rproc: is_using_kernel_fw: 0
[    0.295479] remoteproc remoteproc0: e907_rproc is available
[    0.296342] sunxi-rproc 43030000.e907_rproc: sunxi rproc driver probe ok
[    0.297988] sunxi-rpbuf-controller rpbuf_controller0@0: assigned reserved memory node e907_rpbuf@81646000
[    0.300077] [ADDR_MGT] addr_mgt_probe: module version: v1.0.13
[    0.301347] [ADDR_MGT] addr_mgt_probe: success.
[    0.302458] NET: Registered protocol family 17
[    0.303118] NET: Registered protocol family 15
[    0.303803] Key type dns_resolver registered
[    0.327081] UBI error: cannot open mtd sys, error -2
[    0.327732] UBI: block: can't open volume on ubi0_-1, err=-19
[    0.328437] sunxi:rtc-4a000c00.rtc:[WARN]: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    0.329755] sunxi-rtc 4a000c00.rtc: setting system clock to 1970-01-01T00:00:02 UTC (2)
[    0.333265] sunxi:disp:[WARN]: [DE]: not found boot_disp0
[    0.334000] sunxi:disp:[WARN]: [DE]: sel 0, gamma_base=0xe4130040
[    0.334875] sunxi:disp:[WARN]: [DE]: sel 0, gamma_ctrl_block 0xe4130040 val c352a000 dirty 0 size 8 gamma_tab_block 0xe4130100 val c352a0c0 dirty 0 size 1024
[    0.337464] sunxi:disp:[ERR]: [FB]: fb_num 1 fb_format 0
[    0.338175] sunxi:disp:[ERR]: [FB]: fbinfo: fb: 0, disp: 0 channel: 0 layer: 0 zorder: 16 w: 320 h: 192
[    0.339649] sunxi:disp:[ERR]: [FB]: fb_num 0 use rot 0 degree0
[    0.340394] sunxi:disp:[ERR]: [FB]: smooth display disp0: type64 mode4 disp1: type0 mode0
[    0.343303] sunxi:disp:[ERR]: [FB]: display logo on display 0 channel 0 layer 0 type 0
[    0.344407] sunxi:disp:[ERR]: [FB]: fb 0 vir 0x(ptrval) phy 0x83c80000
[    0.345222] sunxi:disp:[ERR]: [FB]: platform_fb_post_init start
[    0.346303] sunxi:disp:[WARN]: [DE]: attached ok, mgr0<-->dev0
[    0.347098] sunxi:disp:[WARN]: [DE]: type:64,mode:4,fmt:rgb,bits:8bits,eotf:0,cs:0 dvi_hdmi:2, range:0 scan:0 ratio:8
[    0.349612] sunxi:sound-common:[ERR]: 301 pacfg_level_trig_init(): pa-pin-0 (79) request failed
[    0.350769] sunxi:sound-common:[ERR]: 612 snd_sunxi_pa_pin_init(): pacfg_level_trig_init failed
[    0.353290] sunxi:sound-i2s:[WARN]: 2206 snd_sunxi_dts_params_init(): clk-en-post-delay missing
[    0.354388] sunxi:sound-i2s:[WARN]: 2214 snd_sunxi_dts_params_init(): clk-keep missing
[    0.356164] sunxi:sound-mach:[WARN]: 372 asoc_simple_parse_ucfmt(): set data late to default
[    0.357653] debugfs: Directory 'soc@2002000:codec_plat' with parent 'audiocodec' already present!
[    0.359023] sunxi-snd-mach soc@2002000:codec_mach: 42030000.codec <-> soc@2002000:codec_plat mapping ok
[    0.361686] sunxi:sound-mach:[WARN]: 372 asoc_simple_parse_ucfmt(): set data late to default
[    0.362839] sunxi-snd-mach soc@2002000:i2s0_mach: No 'sound-dai' property
[    0.364009] debugfs: Directory '42032000.i2s0_plat' with parent 'sndi2s0' already present!
[    0.365273] sunxi-snd-mach soc@2002000:i2s0_mach: snd-soc-dummy-dai <-> 42032000.i2s0_plat mapping ok
[    0.372382] ALSA device list:
[    0.372797]   #0: audiocodec
[    0.373151]   #1: sndi2s0
[    0.373742] sunxi:uart-ng-uart-ng0:[INFO]: uart0, select set 6, baud 1500000, uartclk 192000000 beyond rance[24000000, 120000000]
[    0.375365] Waiting for root device /dev/ubiblock0_7...
[    0.462775] sunxi:sunxi_mmc_host-44020000.sdmmc:[INFO]: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    0.464227] sunxi:pin-42000000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
[    1.378907] sunxi_usb_udc 44100000.udc-controller: 44100000.udc-controller supply udc not found, using dummy regulator

QY157

@momoyu 如果正常启动的话应该会打印出rtsp的地址，我看了源码应该会展示出来，现在好像没有运行到rtsp server 的启动的日志那里

QY157

@awwwwa 现在rtsp不正常，无法打开rtsp视频

QY157

日志如下：

root@(none):/mnt/extsd# ./sample_smartIPC_demo -path sample_smartIPC_demo.conf
WARNING: Logging before InitGoogleLogging() is written to STDERR
I0101 01:00:50.172865   274 sample_smartIPC_demo.c:104] <ParseCmdLine> path:[./sample_smartIPC_demo], arg number is [3]
I0101 01:00:50.187725   274 confparser.c:60] <createConfParser> load conf file sample_smartIPC_demo.conf ok!
I0101 01:00:50.188644   274 sample_smartIPC_demo.c:684] <loadSampleConfig> audio test enable 0, capture 1-16000-16-1-1-1-1-/mnt/extsd/capture_, playback 1-80-/mnt/extsd/test.wav
I0101 01:00:50.189453   274 sample_smartIPC_demo.c:779] <loadSampleConfig> H.264
I0101 01:00:50.190427   274 sample_smartIPC_demo.c:879] <loadSampleConfig> motiondetect param: {mJudgeMotionNum:20, mMotionPdetThres:0.400000, mMotionDynamicThres:0.500000}
I0101 01:00:50.191038   274 sample_smartIPC_demo.c:937] <loadSampleConfig> H.264
I0101 01:00:50.191647   274 sample_smartIPC_demo.c:1005] <loadSampleConfig> mSub2nd take picture 0 interval 10 file /mnt/extsd/sub_2nd_pic cnt 10
I0101 01:00:50.192522   274 sample_smartIPC_demo.c:1071] <loadSampleConfig> H.264
I0101 01:00:50.193194   274 sample_smartIPC_demo.c:1139] <loadSampleConfig> three2nd take picture 0 interval 10 file /mnt/extsd/three_2nd_pic cnt 10
I0101 01:00:50.194039   274 sample_smartIPC_demo.c:1205] <loadSampleConfig> H.264
I0101 01:00:50.194751   274 sample_smartIPC_demo.c:1273] <loadSampleConfig> four2nd take picture 0 interval 10 file /mnt/extsd/four_2nd_pic cnt 10
I0101 01:00:50.195152   274 sample_smartIPC_demo.c:1285] <loadSampleConfig> MainEn:1, Main2ndEn:0, SubEn:0, Sub2ndEn:0, IspAndVeLinkageEn:1, AdaptEn:1, LensMoveMaxQp:40, WbYuvEn:0, TestDuration:0
I0101 01:00:50.195819   274 sample_smartIPC_demo.c:1304] <loadSampleConfig> MultiSensorOnlineEnable:0
Committed_AS:       4360 kB
I0101 01:00:50.210305   274 mpi_sys.c:854] <AW_MPI_SYS_SetConf> kfctmpdir is [/tmp]
I0101 01:00:50.213994   274 mpi_sys.c:1505] <AW_MPI_SYS_Init> ISP init
I0101 01:00:50.215011   274 isp_version.h:32] <isp_version_info> [ISP]>>>>>>>>>>>>>>>>>>>> ISP VERSION INFO <<<<<<<<<<<<<<<<<<<
IPCORE: ISP603
branch: libisp-dev
commit: 85909eef135a0108ea1214df4886d6c741a71c39
date  : Tue May 27 18:59:00 2025 +0800
author: <mayifei@allwinnertech.co[ 3649.151127] sunxi:disp:[WARN]: [DE]: (0,2,0) fail
m>
----------------------------[ 3649.151888] sunxi:disp:[WARN]: [DE]: get layer(0,2,0) fail
----------------------------

I0101 01:00:50.215322   274 mpi_sys.c:1507] <AW_MPI_SYS_Init> ISP init done
I0101 01:00:50.216050   274 hwdisplay.c:84] <hw_display_init> 
I0101 01:00:50.216321   274 hwdisplay.c:1020] <hwd_init> (hwd_init 1020)
I0101 01:00:50.218615   274 hwdisplay.c:1071] <hwd_init> ret[0][2,0]ch[2]lyl[0] init: enable[0], screenwin[0,0, 0x0], zorder[0], alpha[mode:0, value:0]
I0101 01:00:50.238796   274 audio_hw.c:198] <MakeAllMixerElemsAvailable> pcm open and close, all MixerElems maybe exist.
I0101 01:00:50.239120   274 alsa_interface.c:736] <alsaOpenMixer> open mixer:hw:0
I0101 01:00:50.241465   274 alsa_interface.c:792] <alsaOpenMixer> set playback vol_val to value: 27, mppValue:87
I0101 01:00:50.241841   274 alsa_interface.c:805] <alsaOpenMixer> set playback soft_vol val to value: 130, mppValue:0
I0101 01:00:50.242093   274 alsa_interface.c:736] <alsaOpenMixer> open mixer:hw:1
I0101 01:00:50.243814   274 sample_smartIPC_demo.c:2028] <configMainStream> main vipp0 ve_online_en:0, dma_buf_num:0, venc ch0 OnlineEnable:0, OnlineShareBufNum:0
I0101 01:00:50.244122   274 sample_smartIPC_demo.c:2074] <co[ 3649.179690] sunxi:vin:[INFO]: video0 open
nfigMainStream> main vipp0 tdm_speed_down_en:0
I0101 01:00:50.244342   274 sample_smartIPC_demo.c:2094] <configMainStream> main EncppSharpAttenCoefPer: 100%
I0101 01:00:50.244854   274 sample_smartIPC_demo.c:2106] <configMainStream> main vbvThreshSize: 1[ 3649.181800] sunxi:vin:[INFO]: [gc2083_mipi]PWR_ON!!!
31070, vbvBufSize: 655358
I0101 01:00:50.245204   274 video.c:138] <video_init> [ISP]video device name is vin_video0
I0101 01:00:50.246112   274 isp_dev.c:588] <isp_video_open> [ISP]open video device[0], detect isp0 success!
I0101 01:00:50.248623   279 mpi_sys.c:1085] <MonitorEnvVarThread> detect user environment:
I0101 01:00:50.248933   279 mpi_sys.c:1086] <MonitorEnvVarThread> /tmp/mpp_log_level
I0101 01:00:50.249121   279 mpi_sys.c:1087] <MonitorEnvVarThread> /tmp/mpp_venc_sei_config_param
I0101 01:00:50.281463   274 vide[ 3649.215930] sunxi:vin:[INFO]: ve_online close
o.c:209] <video_set_fmt> [ISP]video0 fd[9] ve_online_en=0, dma_buf_num=0
I0101 01:00:50.284276   274 isp_dev.c:408] <isp_tdm_open> [ISP]tdm_rx device name is sunxi_tdm_rx.0
W0101 01:00:50.284738   274 isp_dev.c:454] <isp_dev_open> [ISP_WARN]ISP0 maybe online mode, ignore tdm open failed.
I0101 01:00:50.285208   274 isp_dev.c:480] <isp_dev_open> [ISP]open isp device[0] success!
I0101 01:00:50.291840   274 isp_helper.c:164] <isp_ctx_save_init> [ISP]get isp_ctx from /mnt/extsd/isp0_1920_1080_15_0_gc2083_mipi_ctx_saved.bin success!!!
I0101 01:00:50.292305   274 isp_ini_parse.c:1611] <parser_ini_info> [ISP]prefer isp config: [gc2083_mipi], 1920x1080, 15, 0, 0
W0101 01:00:50.292836   274 isp_ini_parse.c:1628] <parser_ini_info> [ISP_WARN]cannot find gc2083_mipi_1920_1080_15_0_0 isp config, use gc2083_mipi_1920_1088_15_0_0 -> [gc2083_mipi_isp603_20241205_171656_final_rgb_suit]
[ISP]read restrict mark_id is 0x6c00
I0101 01:00:50.303422   274 isp.c:1718] <isp_run> [ISP]create isp0 server thread!
W0101 01:00:50.304517   274 isp.c:3861] <isp_set_algo_freq_div> [ISP_WARN]div_ratio  = 0, the vaild ratio is [1,10]!
I0101 01:00:50.305002   278 videoInputHw.c:5244] <VideoInputHw_CapThread> isp[0] sensor info size:1920x1080, user set size:1280x720
I0101 01:00:50.309040   278 videoInputHw.c:5295] <VideoInputHw_CapThread> EnableVipp[0]: vfmt.bufs:3, online:0
I0101 01:00:50.309456   278 video.c:708] <video_queue_buffer> [ISP]buffer 0 plane 0x82000000 DMABUF fd is 14
I0101 01:00:50.309758   278 video.c:708] <video_queue_buffer> [ISP]buffer 1 plane 0x8208d000 DMABUF fd is 15
I0101 01:00:50.310027   278 video.c:708] <video_queue_buffer> [ISP]buffer 2 plane 0x8211a000 DMABUF fd is 16
I0101 01:00:50.310240   278 videoInputHw.c:5305] <VideoInputHw_CapThread> pVipp[0]->mstAttr.large_dma_merge_en = 0
I0101 01:00:50.310735   282 TDMRawProcessForTools.c:591] <SaveTdmRawDataThread> pRawInfo->flagpath is /tmp/isp0_1920_1080_15_0/raw/raw_flag
I0101 01:00:50.327197   274 videoInputHw.c:1054] <videoInputHw_ChnEnable> receive enable vipp[0] reply: 0x0!
INFO   : cedarc <cdc_log_set_level:78>: Set log level to 5 from /etc/cedarc.conf
[ 3649.264978] sunxi:VE:[INFO]: 469 enable_cedar_hw_clk_module(): execute set_vcu_en_regmode_to1_to0
[ 3649.265028] sunxi:VE:[INFO]: 1264 ioctl_platform(): IOCTL_SET_CSI_IRQ_FUNC
[ 3649.267075] sunxi:VE:[INFO]: 469 enable_cedar_hw_clk_module(): execute set_vcu_en_regmode_to1_to0
I0101 01:00:50.334574   284 VideoEnc_Component.c:1311] <CedarvEncInit> VencChn[0] set VbrOptEn 1
I0101 01:00:50.334929   284 VideoEnc_Component.c:1333] <CedarvEncInit> VencChn[0] set ProductCase mode: 0
I0101 01:00:50.335448   274 sample_smartIPC_demo.c:5744] <prepare> VencChn[0] use the default venc params for product mode 0
I0101 01:00:50.335743   274 sample_smartIPC_demo.c:5762] <prepare> VencChn[0] ispVeLink:1-1-0
I0101 01:00:50.335977   274 sample_smartIPC_demo.c:5541] <setRegionDetectLink> VencChn[0] region_link_en: 0 -> 1
I0101 01:00:50.336171   274 sample_smartIPC_demo.c:5546] <setRegionDetectLink> VencChn[0] tex_detect_en: 0 -> 1
I0101 01:00:50.336347   274 sample_smartIPC_demo.c:5551] <setRegionDetectLink> VencChn[0] motion_detect_en: 0 -> 1
I0101 01:00:50.336765   274 sam[ 3649.267142] sunxi:VE:[INFO]: 469 enable_cedar_hw_clk_module(): execute set_vcu_en_regmode_to1_to0
ple_common_venc.c:307] <setRcVbrOptParam> VencChn[0] change RcPriority 0 -> 3
I0101 01:00:50.337007   274 sample_common_venc.c:296] <setVencLensMovingMaxQp> VeChn[0] set LensMovingMaxQp 40
I0101 01:00:50.337219   274 VideoEnc_Component.c:6540] <VideoEncSetLensMovingMaxQp> VencChn[0] set LensMovingMaxQp:40
I0101 01:00:50.337469   274 VideoEnc_Component.c:7956] <VideoEncComponentTunnelRequest> set inputPortTunnelFlag = TRUE
I0101 01:00:50.337669   274 sample_smartIPC_demo.c:5786] <prepare> mainStream vipp:0 viChn:0 veChn:0
I0101 01:00:50.338237   274 VideoEnc_Component.c:993] <setVbvBufferConfig> bitrate: 1024 Kbps, set encode vbv size [655360]bytes, frame length threshold [131070]bytes
I0101 01:00:50.338625   274 VideoEnc_Component.c:2474] <CedarvVideoEncInit> VencChn[0] Online Mode=1,Chn=0,BufNum=0,OnlineEnFlag=0,sensorID=0,bkID=0,VcuOn=1,MultiSensorOnlineEn=0
I0101 01:00:50.341493   286 sample_smartIPC_demo.c:5365] <MsgQueueThread> msg queue thread start run!
WARNING: cedarc <resetEncoderVcu:887>: reset vcu and encoder
I0101 01:00:50.377128   289 record.c:341] <record_set_config> record[0] requestKeyFrame[0x2a2c8]
I0101 01:00:50.377526   289 record.c:343] <record_set_config> record[0] valid[1] VeChn[0] handler[0] max file cnt[10], max file duration[60000000] file path[/mnt/extsd/mainStream]
I0101 01:00:50.378167   289 sample_smartIPC_demo.c:4638] <getVencStreamThread> VencChn[0] stream_buf:0xb74d3020, size=138240
E0101 01:00:50.533507   281 isp_dev.c:274] <isp_stat_process_buffer> [ISP_ERR]AEWB: stats error, skipping buffer.
I0101 01:00:50.575969   289 record.c:432] <record_send_data> record[0] output file path[/mnt/extsd/mainStream_0.raw]
I0101 01:00:50.590434   289 record.c:220] <openFile> record[0] open file[/mnt/extsd/mainStream_0.raw] success!
I0101 01:00:50.590784   289 record.c:439] <record_send_data> record[0] first frame
I0101 01:00:50.591035   289 record.c:476] <record_send_data> record[0] got I frame
W0101 01:00:50.600942   281 isp_dev.c:1093] <isp_sensor_get_flip> [ISP_WARN]gc2083_mipi get sensor_flip failed: Invalid argument (22).
I0101 01:00:51.329550   285 VideoEnc_Component.c:9926] <SEIThread> veChn[0] offline sei get ispDev[0] from vipp[0]

QY157

@awwwwa 才更新的，非常感谢

QY157

v821 支持哪些型号的nand flash

QY157

多谢，多谢，多谢，多谢，多谢，

QY157 发布的帖子