全志在线开发者论坛

默

已放弃，勿回复。

默

我打开了内核Lock debugging的选项，发现每次启动都会在同一个地方 oops。

[    2.407836] 001: spi spi0: spi0 supply spi not found, using dummy regulator
[    2.417187] 001: sunxi_spi_resource_get()2198 - [spi0] SPI MASTER MODE
[    2.424502] 001: sunxi_spi_resource_get()2236 - Failed to get sample mode
[    2.431708] 001: sunxi_spi_resource_get()2241 - Failed to get sample delay
[    2.438807] 001: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
[    2.448248] 001: sunxi_spi_clk_init()2287 - [spi0] mclk 100000000
[    2.463123] 000: sunxi_spi_probe()2700 - [spi0]: driver probe succeed, base c881d000, irq 39
[    3.019955] 000: ------------[ cut here ]------------
[    3.025247] 000: kernel BUG at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/kernel/locking/rtmutex.c:1750!
[    3.037001] 000: Internal error: Oops - BUG: 0 [#1] PREEMPT_RT SMP ARM
[    3.043840] 000: Modules linked in:
[    3.047476] 000:
[    3.049484] 000: CPU: 0 PID: 311 Comm: kworker/u4:4 Not tainted 5.4.61-rt37 #3
[    3.057034] 000: Hardware name: Generic DT based system
[    3.062262] 000: Workqueue: test-ww_mutex test_cycle_work
[    3.067920] 000:
[    3.069848] 000: PC is at rt_mutex_slowlock_locked+0x17c/0x25c
[    3.075952] 000: LR is at 0xffffffff
[    3.079677] 000: pc : [<c080b524>]    lr : [<ffffffff>]    psr: 60000193
[    3.086686] 000: sp : c7305dc8  ip : 0000000e  fp : 00000002
[    3.092334] 000: r10: 00000000  r9 : c7305e10  r8 : 00000000
[    3.098250] 000: r7 : c7304000  r6 : 00000000  r5 : c68f5238  r4 : c7305eb0
[    3.105207] 000: r3 : c70abeb0  r2 : 0000000f  r1 : c7305eb0  r0 : 00000000
[    3.112156] 000: Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.120173] 000: Control: 10c5387d  Table: 4000406a  DAC: 00000051
[    3.126635] 000: Process kworker/u4:4 (pid: 311, stack limit = 0x(ptrval))
[    3.133837] 000: Stack: (0xc7305dc8 to 0xc7306000)
[    3.138641] 000: 5dc0:                   60000113 00000002 c016e874 00000000 c7305eb0 7691f5d7
[    3.147249] 000: 5de0: 00000001 c7304000 c7305e10 00000000 c68f5238 00000002 60000113 00000000
[    3.156264] 000: 5e00: c7305eb0 c080b910 c7305eb0 c7305e10 00000001 00000000 00000000 00000001
[    3.165279] 000: 5e20: 00000000 00000000 c70ed640 c68f5238 11111100 11111111 c703b480 c68f5330
[    3.174294] 000: 5e40: 00000078 11111111 00000000 00000000 00000000 7691f5d7 c7304000 c7305eb0
[    3.183014] 000: 5e60: c68f52f8 c68f5238 c68f5298 00000001 c016e874 00000000 c0eb6322 c080be28
[    3.191622] 000: 5e80: c7305eb0 c7305ecc c016e874 7691f5d7 c71d5100 c71d5100 c68f52f8 c7304000
[    3.200230] 000: 5ea0: c68f5330 c0eb72f0 c7304000 c016e874 c70ed640 0000000e 00000001 00010000
[    3.209254] 000: 5ec0: 00000000 c0e1fbac 00000000 c0e1fbb0 c10767fc 00000000 c0ae93e0 00000000
[    3.218277] 000: 5ee0: 00000000 00000001 0000000e 7691f5d7 c7008800 c71d5100 c68f52f8 c7008800
[    3.227301] 000: 5f00: c7019e00 c0137920 00000001 00000000 c01377bc c0163ee4 c70edcf0 00000000
[    3.235909] 000: 5f20: c0137f38 c14ffb70 c1076bdc 00000000 c0a99df9 00000000 00000000 7691f5d7
[    3.244508] 000: 5f40: 00000000 c71d5100 c71d5114 c7008800 c7304000 c700883c c0e0a5c0 c0ec2e14
[    3.253532] 000: 5f60: 00000000 c0138104 00000000 c73e2880 c7304000 c7221680 c71d5100 c0137f10
[    3.262131] 000: 5f80: c70abea0 c73e28c0 00000000 c013d798 c7221680 c013d668 00000000 00000000
[    3.270738] 000: 5fa0: 00000000 00000000 00000000 c01010c0 00000000 00000000 00000000 00000000
[    3.279345] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.287951] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    3.296558] 000: [<c080b524>] (rt_mutex_slowlock_locked) from [<c080b910>] (rt_mutex_slowlock+0x68/0xb0)
[    3.306044] 000: [<c080b910>] (rt_mutex_slowlock) from [<c080be28>] (ww_mutex_lock+0x6c/0xf4)
[    3.314567] 000: [<c080be28>] (ww_mutex_lock) from [<c016e874>] (test_cycle_work+0x54/0xd0)
[    3.322916] 000: [<c016e874>] (test_cycle_work) from [<c0137920>] (process_one_work+0x2e0/0x588)
[    3.331691] 000: [<c0137920>] (process_one_work) from [<c0138104>] (worker_thread+0x1f4/0x2e8)
[    3.340699] 000: [<c0138104>] (worker_thread) from [<c013d798>] (kthread+0x130/0x150)
[    3.348529] 000: [<c013d798>] (kthread) from [<c01010c0>] (ret_from_fork+0x14/0x34)
[    3.356557] 000: Exception stack(0xc7305fb0 to 0xc7305ff8)
[    3.362286] 000: 5fa0:                                     00000000 00000000 00000000 00000000
[    3.370892] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.379498] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.386867] 000: Code: e1a00005 ebfffee4 e2508000 1a000000 (e7f001f2)
[    3.393709] 000: ---[ end trace 0000000000000001 ]---
[    3.398770] 000: note: kworker/u4:4[311] exited with preempt_count 1
[    3.405416] 000: ------------[ cut here ]------------
[    3.410465] 000: WARNING: CPU: 0 PID: 311 at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/kernel/sched/core.c:6942 __might_sleep+0x80/0xa4
[    3.425141] 000: do not call blocking ops when !TASK_RUNNING; state=2 set at [<(ptrval)>] rt_mutex_slowlock_locked+0xc0/0x25c
[    3.436444] 000: Modules linked in:
[    3.439932] 000:
[    3.441940] 000: CPU: 0 PID: 311 Comm: kworker/u4:4 Tainted: G      D           5.4.61-rt37 #3
[    3.450545] 000: Hardware name: Generic DT based system
[    3.455998] 000: Workqueue: test-ww_mutex test_cycle_work
[    3.461647] 000:
[    3.463578] 000: [<c010f9dc>] (unwind_backtrace) from [<c010ba80>] (show_stack+0x10/0x14)
[    3.471765] 000: [<c010ba80>] (show_stack) from [<c07f11c8>] (dump_stack+0x9c/0xd0)
[    3.479430] 000: [<c07f11c8>] (dump_stack) from [<c011ba28>] (__warn+0xc0/0x104)
[    3.486829] 000: [<c011ba28>] (__warn) from [<c011bae4>] (warn_slowpath_fmt+0x78/0xa0)
[    3.494744] 000: [<c011bae4>] (warn_slowpath_fmt) from [<c0144a8c>] (__might_sleep+0x80/0xa4)
[    3.503675] 000: [<c0144a8c>] (__might_sleep) from [<c012cdb4>] (exit_signals+0x2c/0x13c)
[    3.511861] 000: [<c012cdb4>] (exit_signals) from [<c011f920>] (do_exit+0x158/0xaa0)
[    3.519967] 000: [<c011f920>] (do_exit) from [<c010bcec>] (die+0x268/0x2ec)
[    3.526937] 000: [<c010bcec>] (die) from [<c010bf50>] (do_undefinstr+0x9c/0x1e4)
[    3.534688] 000: [<c010bf50>] (do_undefinstr) from [<c01022fc>] (__und_svc_finish+0x0/0x44)
[    3.543036] 000: Exception stack(0xc7305d78 to 0xc7305dc0)
[    3.548764] 000: 5d60:                                                       00000000 c7305eb0
[    3.557372] 000: 5d80: 0000000f c70abeb0 c7305eb0 c68f5238 00000000 c7304000 00000000 c7305e10
[    3.565980] 000: 5da0: 00000000 00000002 0000000e c7305dc8 ffffffff c080b524 60000193 ffffffff
[    3.574584] 000: [<c01022fc>] (__und_svc_finish) from [<c080b524>] (rt_mutex_slowlock_locked+0x17c/0x25c)
[    3.584599] 000: [<c080b524>] (rt_mutex_slowlock_locked) from [<c080b910>] (rt_mutex_slowlock+0x68/0xb0)
[    3.594075] 000: [<c080b910>] (rt_mutex_slowlock) from [<c080be28>] (ww_mutex_lock+0x6c/0xf4)
[    3.602589] 000: [<c080be28>] (ww_mutex_lock) from [<c016e874>] (test_cycle_work+0x54/0xd0)
[    3.610939] 000: [<c016e874>] (test_cycle_work) from [<c0137920>] (process_one_work+0x2e0/0x588)
[    3.620138] 000: [<c0137920>] (process_one_work) from [<c0138104>] (worker_thread+0x1f4/0x2e8)
[    3.629145] 000: [<c0138104>] (worker_thread) from [<c013d798>] (kthread+0x130/0x150)
[    3.637329] 000: [<c013d798>] (kthread) from [<c01010c0>] (ret_from_fork+0x14/0x34)
[    3.644984] 000: Exception stack(0xc7305fb0 to 0xc7305ff8)
[    3.650470] 000: 5fa0:                                     00000000 00000000 00000000 00000000
[    3.659484] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.668090] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    3.675143] 000: irq event stamp: 6308
[    3.678892] 000: hardirqs last  enabled at (6307): [<c080d018>] _raw_spin_unlock_irq+0x24/0x68
[    3.687508] 000: hardirqs last disabled at (6308): [<c080cdec>] _raw_spin_lock_irq+0x14/0x78
[    3.695950] 000: softirqs last  enabled at (0): [<c011966c>] copy_process+0x4fc/0x16b0
[    3.703882] 000: softirqs last disabled at (0): [<00000000>] 0x0
[    3.709886] 000: ---[ end trace 0000000000000002 ]---
[    3.715170] 000: BUG: sleeping function called from invalid context at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/include/linux/cgroup-defs.h:755
[    3.729928] 000: in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 311, name: kworker/u4:4
[    3.739200] 000: INFO: lockdep is turned off.
[    3.743564] 000: irq event stamp: 6308
[    3.747478] 000: hardirqs last  enabled at (6307): [<c080d018>] _raw_spin_unlock_irq+0x24/0x68
[    3.756093] 000: hardirqs last disabled at (6308): [<c080cdec>] _raw_spin_lock_irq+0x14/0x78
[    3.764535] 000: softirqs last  enabled at (0): [<c011966c>] copy_process+0x4fc/0x16b0
[    3.772457] 000: softirqs last disabled at (0): [<00000000>] 0x0
[    3.778462] 000: CPU: 0 PID: 311 Comm: kworker/u4:4 Tainted: G      D W         5.4.61-rt37 #3
[    3.787067] 000: Hardware name: Generic DT based system
[    3.792295] 000: Workqueue: test-ww_mutex test_cycle_work
[    3.797944] 000:
[    3.799944] 000: [<c010f9dc>] (unwind_backtrace) from [<c010ba80>] (show_stack+0x10/0x14)
[    3.808510] 000: [<c010ba80>] (show_stack) from [<c07f11c8>] (dump_stack+0x9c/0xd0)
[    3.816174] 000: [<c07f11c8>] (dump_stack) from [<c01449b0>] (___might_sleep+0x1f8/0x254)
[    3.824739] 000: [<c01449b0>] (___might_sleep) from [<c012cdb4>] (exit_signals+0x2c/0x13c)
[    3.833399] 000: [<c012cdb4>] (exit_signals) from [<c011f920>] (do_exit+0x158/0xaa0)
[    3.841513] 000: [<c011f920>] (do_exit) from [<c010bcec>] (die+0x268/0x2ec)
[    3.848474] 000: [<c010bcec>] (die) from [<c010bf50>] (do_undefinstr+0x9c/0x1e4)
[    3.855878] 000: [<c010bf50>] (do_undefinstr) from [<c01022fc>] (__und_svc_finish+0x0/0x44)
[    3.864616] 000: Exception stack(0xc7305d78 to 0xc7305dc0)
[    3.870352] 000: 5d60:                                                       00000000 c7305eb0
[    3.879368] 000: 5d80: 0000000f c70abeb0 c7305eb0 c68f5238 00000000 c7304000 00000000 c7305e10
[    3.888383] 000: 5da0: 00000000 00000002 0000000e c7305dc8 ffffffff c080b524 60000193 ffffffff
[    3.897395] 000: [<c01022fc>] (__und_svc_finish) from [<c080b524>] (rt_mutex_slowlock_locked+0x17c/0x25c)
[    3.907417] 000: [<c080b524>] (rt_mutex_slowlock_locked) from [<c080b910>] (rt_mutex_slowlock+0x68/0xb0)
[    3.917343] 000: [<c080b910>] (rt_mutex_slowlock) from [<c080be28>] (ww_mutex_lock+0x6c/0xf4)
[    3.925866] 000: [<c080be28>] (ww_mutex_lock) from [<c016e874>] (test_cycle_work+0x54/0xd0)
[    3.934216] 000: [<c016e874>] (test_cycle_work) from [<c0137920>] (process_one_work+0x2e0/0x588)
[    3.943423] 000: [<c0137920>] (process_one_work) from [<c0138104>] (worker_thread+0x1f4/0x2e8)
[    3.952031] 000: [<c0138104>] (worker_thread) from [<c013d798>] (kthread+0x130/0x150)
[    3.959860] 000: [<c013d798>] (kthread) from [<c01010c0>] (ret_from_fork+0x14/0x34)
[    3.967524] 000: Exception stack(0xc7305fb0 to 0xc7305ff8)
[    3.973018] 000: 5fa0:                                     00000000 00000000 00000000 00000000
[    3.981626] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    3.990223] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  305.208397] 000: ------------[ cut here ]------------
[  305.213465] 000: WARNING: CPU: 0 PID: 12 at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/kernel/rcu/tree_stall.h:648 rcu_check_gp_start_stall+0x184/0x1c0
[  305.229484] 000: Modules linked in:
[  305.233112] 000:
[  305.235120] 000: CPU: 0 PID: 12 Comm: rcuc/0 Tainted: G      D W         5.4.61-rt37 #3
[  305.243137] 000: Hardware name: Generic DT based system
[  305.248365] 000: [<c010f9dc>] (unwind_backtrace) from [<c010ba80>] (show_stack+0x10/0x14)
[  305.256553] 000: [<c010ba80>] (show_stack) from [<c07f11c8>] (dump_stack+0x9c/0xd0)
[  305.264567] 000: [<c07f11c8>] (dump_stack) from [<c011ba28>] (__warn+0xc0/0x104)
[  305.271974] 000: [<c011ba28>] (__warn) from [<c011bae4>] (warn_slowpath_fmt+0x78/0xa0)
[  305.280254] 000: [<c011bae4>] (warn_slowpath_fmt) from [<c018a4d4>] (rcu_check_gp_start_stall+0x184/0x1c0)
[  305.290364] 000: [<c018a4d4>] (rcu_check_gp_start_stall) from [<c018a70c>] (rcu_core+0x1fc/0x26c)
[  305.299233] 000: [<c018a70c>] (rcu_core) from [<c018a7f8>] (rcu_cpu_kthread+0x7c/0xe0)
[  305.307148] 000: [<c018a7f8>] (rcu_cpu_kthread) from [<c01410c8>] (smpboot_thread_fn+0x314/0x350)
[  305.316021] 000: [<c01410c8>] (smpboot_thread_fn) from [<c013d798>] (kthread+0x130/0x150)
[  305.324589] 000: [<c013d798>] (kthread) from [<c01010c0>] (ret_from_fork+0x14/0x34)
[  305.332245] 000: Exception stack(0xc70c1fb0 to 0xc70c1ff8)
[  305.337974] 000: 1fa0:                                     00000000 00000000 00000000 00000000
[  305.346997] 000: 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  305.355595] 000: 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  305.362640] 000: irq event stamp: 19002
[  305.366476] 000: hardirqs last  enabled at (19001): [<c080d18c>] _raw_spin_unlock_irqrestore+0x3c/0x80
[  305.375778] 000: hardirqs last disabled at (19002): [<c08099e8>] __schedule+0x128/0x5e8
[  305.384151] 000: softirqs last  enabled at (18998): [<c018a7f8>] rcu_cpu_kthread+0x7c/0xe0
[  305.392419] 000: softirqs last disabled at (18989): [<c018a7b4>] rcu_cpu_kthread+0x38/0xe0
[  305.400679] 000: ---[ end trace 0000000000000003 ]---
[  305.405792] 000: rcu: rcu_preempt: wait state: RCU_GP_WAIT_GPS(1) ->state: 0x0 delta ->gp_activity 30281 ->gp_req_activity 30140 ->gp_wake_time 30140 ->gp_wake_seq -844 ->gp_seq -844 ->gp_seq_needed -840 ->gp_flags 0x1
[  305.426110] 000: rcu:        rcu_node 0:1 ->gp_seq -844 ->gp_seq_needed -840

默

@xsyr1024 看起来这里 stress 的报错，可能是stress double free了内存引起的，我改了命令参数就正常跑起来了。
所以系统为何卡死仍然未知。

~# stress --help
'stress' imposes certain types of compute stress on your system

Usage: stress [OPTION [ARG]] ...
 -?, --help         show this help statement
     --version      show version statement
 -v, --verbose      be verbose
 -q, --quiet        be quiet
 -n, --dry-run      show what would have been done
 -t, --timeout N    timeout after N seconds
     --backoff N    wait factor of N microseconds before work starts
 -c, --cpu N        spawn N workers spinning on sqrt()
 -i, --io N         spawn N workers spinning on sync()
 -m, --vm N         spawn N workers spinning on malloc()/free()
     --vm-bytes B   malloc B bytes per vm worker (default is 256MB)
     --vm-stride B  touch a byte every B bytes (default is 4096)
     --vm-hang N    sleep N secs before free (default none, 0 is inf)
     --vm-keep      redirty memory instead of freeing and reallocating
 -d, --hdd N        spawn N workers spinning on write()/unlink()
     --hdd-bytes B  write B bytes per hdd worker (default is 1GB)


# 改之后
~# stress --vm 2 --vm-bytes 5M --timeout 100s --vm-keep --vm-hang 1
stress: info: [1230] dispatching hogs: 0 cpu, 0 io, 2 vm, 0 hdd
stress: info: [1230] successful run completed in 100s

# 改之前 
stress --vm 2 --vm-bytes 5M --timeout 100s

默

@xsyr1024 去掉了 sunxi_ce.ko，还是出问题，应该是系统问题了。

:~# stress --vm 2 --vm-bytes 5M --timeout 100s
stress: info: [1200] dispatching hogs: 0 cpu, 0 io, 2 vm, 0 hdd
[   32.537802] 000: usb1-vbus: disabling
stress: FAIL: [1200] (415) <-- worker 1202 got signal 11
stress[   61.682032] 001: BUG: Bad page state in process stress  pfn:ffe62a73
[   61.682056] 001: page:c3f4be68 refcount:-1007370528 mapcount:-1007370551 mapping:00000000 index:0xc7bb0520 compound_mapcount: -962916079
: WARN: [1200] (417) now reaping child worker processes
[   61.682067] 001: flags: 0xc69b1088(waiters|dirty|reserved|head|mappedtodisk|swapbacked|unevictable)
[   61.682085] 001: raw: c69b1088 c7bb0524 c7bf2304 00000000 c7bb0520 c3f2b000 c3f4bec8 c3f4bee0
[   61.682089] 001: page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[   61.682092] 001: bad because of flags: 0x101000(reserved|unevictable)
[   61.682098] 001: Modules linked in:
[   61.682105] 001: CPU: 1 PID: 1201 Comm: stress Not tainted 5.4.61-rt37 #1
[   61.682111] 001: Hardware name: Generic DT based system
[   61.682125] 001: [<c010e1d0>] (unwind_backtrace) from [<c010a978>] (show_stack+0x10/0x14)
[   61.682146] 001: [<c010a978>] (show_stack) from [<c0718c20>] (dump_stack+0x7c/0x98)
[   61.682159] 001: [<c0718c20>] (dump_stack) from [<c01ca66c>] (bad_page+0xfc/0x134)
[   61.682171] 001: [<c01ca66c>] (bad_page) from [<c01ca710>] (free_pages_check+0x6c/0x90)
[   61.682180] 001: [<c01ca710>] (free_pages_check) from [<c01cb974>] (free_pcp_prepare+0x30/0x80)
[   61.682188] 001: [<c01cb974>] (free_pcp_prepare) from [<c01ccfc4>] (free_unref_page_list+0x74/0x278)
[   61.682198] 001: [<c01ccfc4>] (free_unref_page_list) from [<c01a3bdc>] (release_pages+0x10c/0x284)
[   61.682211] 001: [<c01a3bdc>] (release_pages) from [<c01c2094>] (tlb_flush_mmu+0x48/0x5c)
[   61.682222] 001: [<c01c2094>] (tlb_flush_mmu) from [<c01c2158>] (tlb_finish_mmu+0x3c/0x84)
[   61.682230] 001: [<c01c2158>] (tlb_finish_mmu) from [<c01be700>] (unmap_region+0xc0/0xdc)
[   61.682240] 001: [<c01be700>] (unmap_region) from [<c01c09b4>] (__do_munmap+0x254/0x2d4)
[   61.682248] 001: [<c01c09b4>] (__do_munmap) from [<c01c0f9c>] (__vm_munmap+0x6c/0xac)
[   61.682257] 001: [<c01c0f9c>] (__vm_munmap) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   61.682266] 001: Exception stack(0xc3e9ffa8 to 0xc3e9fff0)
[   61.682275] 001: ffa0:                   000250ac 000250a0 b6913000 00501000 b6efe24c 00501000
[   61.682283] 001: ffc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[   61.682289] 001: ffe0: 00000000 be8b1b94 0001296c b6ea5408
[   61.682295] 001: Disabling lock debugging due to kernel taint
[   61.682393] 001: BUG: Bad page state in process stress  pfn:ffe62a70
[   61.682397] 001: page:c3f4be18 refcount:-944044768 mapcount:-944044767 mapping:c3f4be24 index:0xc3f4be24
[   61.682404] 001: 0xffe62a73 name:"T▒▒"
[   61.682412] 001: flags: 0x0()
[   61.682421] 001: raw: 00000000 c7bb44a4 c7bb2d04 c3f4be24 c3f4be24 ee0600a5 c7bb0520 c7bb0520
[   61.682425] 001: page dumped because: nonzero _refcount
[   61.682428] 001: Modules linked in:
[   61.682432] 001: CPU: 1 PID: 1201 Comm: stress Tainted: G    B             5.4.61-rt37 #1
[   61.682437] 001: Hardware name: Generic DT based system
[   61.682442] 001: [<c010e1d0>] (unwind_backtrace) from [<c010a978>] (show_stack+0x10/0x14)
[   61.682454] 001: [<c010a978>] (show_stack) from [<c0718c20>] (dump_stack+0x7c/0x98)
[   61.682464] 001: [<c0718c20>] (dump_stack) from [<c01ca66c>] (bad_page+0xfc/0x134)
[   61.682474] 001: [<c01ca66c>] (bad_page) from [<c01ca710>] (free_pages_check+0x6c/0x90)
[   61.682482] 001: [<c01ca710>] (free_pages_check) from [<c01cb974>] (free_pcp_prepare+0x30/0x80)
[   61.682490] 001: [<c01cb974>] (free_pcp_prepare) from [<c01ccfc4>] (free_unref_page_list+0x74/0x278)
[   61.682499] 001: [<c01ccfc4>] (free_unref_page_list) from [<c01a3bdc>] (release_pages+0x10c/0x284)
[   61.682509] 001: [<c01a3bdc>] (release_pages) from [<c01c2094>] (tlb_flush_mmu+0x48/0x5c)
[   61.682519] 001: [<c01c2094>] (tlb_flush_mmu) from [<c01c2158>] (tlb_finish_mmu+0x3c/0x84)
[   61.682527] 001: [<c01c2158>] (tlb_finish_mmu) from [<c01be700>] (unmap_region+0xc0/0xdc)
[   61.682536] 001: [<c01be700>] (unmap_region) from [<c01c09b4>] (__do_munmap+0x254/0x2d4)
[   61.682543] 001: [<c01c09b4>] (__do_munmap) from [<c01c0f9c>] (__vm_munmap+0x6c/0xac)
[   61.682552] 001: [<c01c0f9c>] (__vm_munmap) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   61.682559] 001: Exception stack(0xc3e9ffa8 to 0xc3e9fff0)
[   61.682567] 001: ffa0:                   000250ac 000250a0 b6913000 00501000 b6efe24c 00501000
[   61.682576] 001: ffc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[   61.682581] 001: ffe0: 00000000 be8b1b94 0001296c b6ea5408
[   61.682593] 000: 8<--- cut here ---
[   61.682599] 000: Unable to handle kernel NULL pointer dereference at virtual address 00000122
[   61.682605] 000: pgd = a9b52f9a
[   61.682614] 000: [00000122] *pgd=46a44835, *pte=00000000, *ppte=00000000
[   61.682624] 000: Internal error: Oops: 817 [#1] PREEMPT_RT SMP ARM
[   61.682632] 000: Modules linked in:
[   61.682636] 000: CPU: 0 PID: 1202 Comm: stress Tainted: G    B             5.4.61-rt37 #1
[   61.682641] 000: Hardware name: Generic DT based system
[   61.682645] 000: PC is at isolate_pcp_pages+0xa8/0x108
[   61.682651] 000: LR is at 0x1
[   61.682654] 000: pc : [<c01caeb4>]    lr : [<00000001>]    psr: 80040013
[   61.682658] 000: sp : c3f4bdd8  ip : 00000001  fp : c0c09644
[   61.682661] 000: r10: c0c7ac3c  r9 : 00000122  r8 : 00000122
[   61.682665] 000: r7 : c7bc58a0  r6 : 00000000  r5 : c7ac1eb4  r4 : 00000001
[   61.682669] 000: r3 : c7bc58a4  r2 : c3f4be1c  r1 : c7ac1ea0  r0 : 00000007
[   61.682674] 000: Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   61.682681] 000: Control: 10c5387d  Table: 4680c06a  DAC: 00000051
[   61.682684] 000: Process stress (pid: 1202, stack limit = 0x7cd547fb)
[   61.682689] 000: Stack: (0xc3f4bdd8 to 0xc3f4c000)
[   61.682694] 000: bdc0:                                                       00000007 c7ac1eb0
[   61.682703] 000: bde0: c3f4be1c c0b390bc c0c0659c c3f4be1c c7bf6cc0 c3f4a000 c3f4be6c c0b390bc
[   61.682711] 000: be00: 00000000 c01cd0a0 c7491b00 c0b390dc c0b390bc 00000001 00000000 00000100
[   61.682719] 000: be20: c7bc58a4 c3f4be24 c3f4be24 ffe62a70 ffffffff c7bb0520 00000001 000003fd
[   61.682728] 000: be40: c3f4be6c c3f4a000 0000001c c0c61fc0 c7bb0524 c01a3bdc c0b38d54 c3f2b00c
[   61.682736] 000: be60: 000003fd 00000000 c69b1088 00000100 00000122 00000000 c7bb0520 ffe62a73
[   61.682744] 000: be80: ffffffff c3f4bee0 00000000 c69b1088 c6a265d8 c69b1110 c6a265d8 c01c2094
[   61.682752] 000: bea0: c3f4bec8 c3e7d440 c3f4a000 b6913000 c69b1088 c01c2158 c69b1110 c3e7d440
[   61.682760] 000: bec0: c3f4a000 c01be700 c3e7d440 bf000000 00000000 00000000 00000002 c3ec3000
[   61.682769] 000: bee0: c3f2b000 00000000 00000008 c7bf40e0 c7bf1000 c7bf1020 c7bf2a80 c7bf2aa0
[   61.682777] 000: bf00: c7bf42c0 c7bf42e0 c7bf10e0 ee0600a5 c69b1088 c3e7d440 00000000 c6a265d8
[   61.682785] 000: bf20: b6913000 b6e14000 00000001 c01c09b4 b6e14000 c07316dc c3e7d444 c69b1090
[   61.682793] 000: bf40: 00000001 c3f4a000 00000000 c3e7d494 c3f4bf74 c3e7d440 b6913000 00501000
[   61.682802] 000: bf60: 00000001 c01c0f9c 00000001 b6e12008 c3f4bfb0 c3f4bf74 c3f4bf74 ee0600a5
[   61.682810] 000: bf80: 00013698 000250ac 000250a0 00001000 0000005b c0101228 c3f4a000 0000005b
[   61.682818] 000: bfa0: 00013698 c0101000 000250ac 000250a0 b6913000 00501000 b6efe24c 00501000
[   61.682826] 000: bfc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[   61.682835] 000: bfe0: 00000000 be8b1b94 0001296c b6ea5408 60040030 b6913000 00000000 00000000
[   61.682841] 000: [<c01caeb4>] (isolate_pcp_pages) from [<c01cd0a0>] (free_unref_page_list+0x150/0x278)
[   61.682851] 000: [<c01cd0a0>] (free_unref_page_list) from [<c01a3bdc>] (release_pages+0x10c/0x284)
[   61.682861] 000: [<c01a3bdc>] (release_pages) from [<c01c2094>] (tlb_flush_mmu+0x48/0x5c)
[   61.682870] 000: [<c01c2094>] (tlb_flush_mmu) from [<c01c2158>] (tlb_finish_mmu+0x3c/0x84)
[   61.682879] 000: [<c01c2158>] (tlb_finish_mmu) from [<c01be700>] (unmap_region+0xc0/0xdc)
[   61.682887] 000: [<c01be700>] (unmap_region) from [<c01c09b4>] (__do_munmap+0x254/0x2d4)
[   61.682894] 000: [<c01c09b4>] (__do_munmap) from [<c01c0f9c>] (__vm_munmap+0x6c/0xac)
[   61.682902] 000: [<c01c0f9c>] (__vm_munmap) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   61.682910] 000: Exception stack(0xc3f4bfa8 to 0xc3f4bff0)
[   61.682918] 000: bfa0:                   000250ac 000250a0 b6913000 00501000 b6efe24c 00501000
[   61.682926] 000: bfc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[   61.682931] 000: bfe0: 00000000 be8b1b94 0001296c b6ea5408
[   61.682940] 000: Code: e5818000 e5928004 e5823004 e8830104 (e5883000)
[   61.683069] 000: ---[ end trace 0000000000000002 ]---
[   82.707657] 000: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[   82.707679] 000: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1041
[   82.707689] 000:     (detected by 0, t=2102 jiffies, g=277, q=66)
[   82.707695] 000: klogd           D    0  1041      1 0x00000000
[   82.707709] 000: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[   82.707728] 000: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[   82.707741] 000: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[   82.707753] 000: [<c073120c>] (rt_spin_lock_slowlock) from [<c01ca0c8>] (__local_lock_irqsave+0x30/0x68)
[   82.707768] 000: [<c01ca0c8>] (__local_lock_irqsave) from [<c01cb6c4>] (__free_pages_ok+0x27c/0x340)
[   82.707779] 000: [<c01cb6c4>] (__free_pages_ok) from [<c01daafc>] (kfree+0x1e4/0x204)
[   82.707790] 000: [<c01daafc>] (kfree) from [<c015cd30>] (do_syslog+0x688/0x748)
[   82.707803] 000: [<c015cd30>] (do_syslog) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   82.707814] 000: Exception stack(0xc3f49fa8 to 0xc3f49ff0)
[   82.707823] 000: 9fa0:                   00000000 00000000 00000002 000cc890 000003ff 000003fe
[   82.707831] 000: 9fc0: 00000000 00000000 000cc890 00000067 000ccca0 000cc8bc 00000000 000cc8bc
[   82.707837] 000: 9fe0: 000cc354 bef2cb94 00050e58 b6ee5108
[  145.757660] 001: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  145.757683] 001: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1041
[  145.757693] 001:     (detected by 1, t=8407 jiffies, g=277, q=192)
[  145.757700] 001: klogd           D    0  1041      1 0x00000000
[  145.757714] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  145.757734] 001: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[  145.757747] 001: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  145.757758] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01ca0c8>] (__local_lock_irqsave+0x30/0x68)
[  145.757774] 001: [<c01ca0c8>] (__local_lock_irqsave) from [<c01cb6c4>] (__free_pages_ok+0x27c/0x340)
[  145.757785] 001: [<c01cb6c4>] (__free_pages_ok) from [<c01daafc>] (kfree+0x1e4/0x204)
[  145.757796] 001: [<c01daafc>] (kfree) from [<c015cd30>] (do_syslog+0x688/0x748)
[  145.757809] 001: [<c015cd30>] (do_syslog) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  145.757819] 001: Exception stack(0xc3f49fa8 to 0xc3f49ff0)
[  145.757828] 001: 9fa0:                   00000000 00000000 00000002 000cc890 000003ff 000003fe
[  145.757836] 001: 9fc0: 00000000 00000000 000cc890 00000067 000ccca0 000cc8bc 00000000 000cc8bc
[  145.757842] 001: 9fe0: 000cc354 bef2cb94 00050e58 b6ee5108
[  208.807662] 001: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  208.807684] 001: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1041
[  208.807694] 001:     (detected by 1, t=14712 jiffies, g=277, q=265)
[  208.807701] 001: klogd           D    0  1041      1 0x00000000
[  208.807715] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  208.807735] 001: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[  208.807748] 001: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  208.807759] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01ca0c8>] (__local_lock_irqsave+0x30/0x68)
[  208.807775] 001: [<c01ca0c8>] (__local_lock_irqsave) from [<c01cb6c4>] (__free_pages_ok+0x27c/0x340)
[  208.807787] 001: [<c01cb6c4>] (__free_pages_ok) from [<c01daafc>] (kfree+0x1e4/0x204)
[  208.807797] 001: [<c01daafc>] (kfree) from [<c015cd30>] (do_syslog+0x688/0x748)
[  208.807811] 001: [<c015cd30>] (do_syslog) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  208.807822] 001: Exception stack(0xc3f49fa8 to 0xc3f49ff0)
[  208.807830] 001: 9fa0:                   00000000 00000000 00000002 000cc890 000003ff 000003fe
[  208.807838] 001: 9fc0: 00000000 00000000 000cc890 00000067 000ccca0 000cc8bc 00000000 000cc8bc
[  208.807844] 001: 9fe0: 000cc354 bef2cb94 00050e58 b6ee5108
[  271.857660] 001: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  271.857683] 001: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1041
[  271.857693] 001:     (detected by 1, t=21017 jiffies, g=277, q=336)
[  271.857699] 001: klogd           D    0  1041      1 0x00000000
[  271.857713] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  271.857733] 001: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[  271.857747] 001: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  271.857758] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01ca0c8>] (__local_lock_irqsave+0x30/0x68)
[  271.857774] 001: [<c01ca0c8>] (__local_lock_irqsave) from [<c01cb6c4>] (__free_pages_ok+0x27c/0x340)
[  271.857785] 001: [<c01cb6c4>] (__free_pages_ok) from [<c01daafc>] (kfree+0x1e4/0x204)
[  271.857795] 001: [<c01daafc>] (kfree) from [<c015cd30>] (do_syslog+0x688/0x748)
[  271.857808] 001: [<c015cd30>] (do_syslog) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  271.857819] 001: Exception stack(0xc3f49fa8 to 0xc3f49ff0)
[  271.857827] 001: 9fa0:                   00000000 00000000 00000002 000cc890 000003ff 000003fe
[  271.857835] 001: 9fc0: 00000000 00000000 000cc890 00000067 000ccca0 000cc8bc 00000000 000cc8bc
[  271.857842] 001: 9fe0: 000cc354 bef2cb94 00050e58 b6ee5108

默

stress 压测内存崩溃，必现，蒙圈了没思路，看不出是系统问题还是 sunxi_ce.ko 的问题

~# stress --vm 2 --vm-bytes 5M --timeout 100s
stress: info: [1250] dispatching hogs: 0 cpu, 0 io, 2 vm, 0 hdd
** 804 printk messages dropped **
[  182.847050] 000: 7fa0:                   000250ac 000250a0 b6886000 00501000 b6e7124c 00501000
[  182.847058] 000: 7fc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
** 720 printk messages dropped **
[  182.876661] 000: [<c01c2094>] (tlb_flush_mmu) from [<c01c2158>] (tlb_finish_mmu+0x3c/0x84)
[  182.876669] 000: [<c01c2158>] (tlb_finish_mmu) from [<c01be700>] (unmap_region+0xc0/0xdc)
[  182.876677] 000: [<c01be700>] (unmap_region) from [<c01c09b4>] (__do_munmap+0x254/0x2d4)
[  182.876685] 000: [<c01c09b4>] (__do_munmap) from [<c01c0f9c>] (__vm_munmap+0x6c/0xac)
[  182.876693] 000: [<c01c0f9c>] (__vm_munmap) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  182.876701] 000: Exception stack(0xc6b07fa8 to 0xc6b07ff0)
[  182.876709] 000: 7fa0:                   000250ac 000250a0 b6886000 00501000 b6e7124c 00501000
[  182.876717] 000: 7fc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[  182.876723] 000: 7fe0: 00000000 bed88b94 0001296c b6e18408
[  182.876727] 000: BUG: Bad page state in process stress  pfn:47c8e
[  182.876730] 000: page:c7bf01c0 refcount:1 mapcount:1 mapping:00000000 index:0x1fda
[  182.876735] 000: flags: 0x80034(uptodate|lru|active|swapbacked)
[  182.876746] 000: raw: 00080034 c7bf01a4 c7baf2e4 00000000 00001fda 00000000 00000000 00000001
[  182.876749] 000: page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[  182.876752] 000: bad because of flags: 0x30(lru|active)
[  182.876757] 000: Modules linked in: sunxi_ce
[  182.876762] 000: CPU: 0 PID: 1252 Comm: stress Tainted: G    B             5.4.61-rt37 #1
[  182.876768] 000: Hardware name: Generic DT based system
[  182.876772] 000: [<c010e1d0>] (unwind_backtrace) from [<c010a978>] (show_stack+0x10/0x14)
[  182.876781] 000: [<c010a978>] (show_stack) from [<c0718c20>] (dump_stack+0x7c/0x98)
[  182.876791] 000: [<c0718c20>] (dump_stack) from [<c01ca66c>] (bad_page+0xfc/0x134)
[  182.876799] 000: [<c01ca66c>] (bad_page) from [<c01ca710>] (free_pages_check+0x6c/0x90)
[  182.876807] 000: [<c01ca710>] (free_pages_check) from [<c01cb974>] (free_pcp_prepare+0x30/0x80)
[  182.876815] 000: [<c01cb974>] (free_pcp_prepare) from [<c01ccfc4>] (free_unref_page_list+0x74/0x278)
[  182.876824] 000: [<c01ccfc4>] (free_unref_page_list) from [<c01a3bdc>] (release_pages+0x10c/0x284)
[  182.876835] 000: [<c01a3bdc>] (release_pages) from [<c01c2094>] (tlb_flush_mmu+0x48/0x5c)
[  182.876844] 000: [<c01c2094>] (tlb_flush_mmu) from [<c01c2158>] (tlb_finish_mmu+0x3c/0x84)
[  182.876852] 000: [<c01c2158>] (tlb_finish_mmu) from [<c01be700>] (unmap_region+0xc0/0xdc)
[  182.876860] 000: [<c01be700>] (unmap_region) from [<c01c09b4>] (__do_munmap+0x254/0x2d4)
[  182.876868] 000: [<c01c09b4>] (__do_munmap) from [<c01c0f9c>] (__vm_munmap+0x6c/0xac)
[  182.876876] 000: [<c01c0f9c>] (__vm_munmap) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  182.876883] 000: Exception stack(0xc6b07fa8 to 0xc6b07ff0)
[  182.876891] 000: 7fa0:                   000250ac 000250a0 b6886000 00501000 b6e7124c 00501000
[  182.876899] 000: 7fc0: 000250ac 000250a0 00001000 0000005b 000250a0 00000000 00000001 00013698
[  182.876905] 000: 7fe0: 00000000 bed88b94 0001296c b6e18408
[  182.877164] 001: 8<--- cut here ---
[  182.877176] 001: Unable to handle kernel NULL pointer dereference at virtual address 00000104
[  182.877187] 001: pgd = 0a2ebd02
[  182.877197] 001: [00000104] *pgd=43eac835, *pte=00000000, *ppte=00000000
[  182.877209] 001: Internal error: Oops: 817 [#1] PREEMPT_RT SMP ARM
[  182.877217] 001: Modules linked in: sunxi_ce
[  182.877225] 001: CPU: 1 PID: 1251 Comm: stress Tainted: G    B             5.4.61-rt37 #1
[  182.877231] 001: Hardware name: Generic DT based system
[  182.877234] 001: PC is at __pagevec_lru_add_fn+0x168/0x180
[  182.877245] 001: LR is at __mod_zone_page_state+0xa4/0xe8
[  182.877252] 001: pc : [<c01a2f00>]    lr : [<c01b0898>]    psr: 60040113
[  182.877257] 001: sp : c3edfe68  ip : 00000000  fp : c7baf1c0
[  182.877260] 001: r10: c0c62818  r9 : 00000000  r8 : 00000000
[  182.877264] 001: r7 : c7baf1c4  r6 : c0c62818  r5 : 00000001  r4 : c7baf1c0
[  182.877268] 001: r3 : 00000100  r2 : c0c62820  r1 : 00000001  r0 : 00000000
[  182.877273] 001: Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  182.877280] 001: Control: 10c5387d  Table: 43fa406a  DAC: 00000051
[  182.877283] 001: Process stress (pid: 1251, stack limit = 0xa4904f68)
[  182.877289] 001: Stack: (0xc3edfe68 to 0xc3ee0000)
[  182.877297] 001: fe60:                   c7ac8d78 00000001 c0c61fc0 c7ac8d7c c01a2d98 c01a3dbc
[  182.877305] 001: fe80: 0000000f c0b38d54 c0b38d78 c0c0659c c7bb36c0 c7ac8d78 06f90000 c3fdc374
[  182.877313] 001: fea0: 00000800 c01a3ee0 45e3675f c3fbfb28 c3ede000 c7bb36c0 00000000 c3fdc000
[  182.877322] 001: fec0: c3fdc374 c01bc6e4 c3ede000 c3edff5c c3fbfb28 00000055 00000cc0 000b6add
[  182.877329] 001: fee0: b6add000 c3fa6da8 c3fa6da8 00000000 00000000 00000000 00000000 c3fdc374
[  182.877337] 001: ff00: c3e5c570 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  182.877345] 001: ff20: c3e9d914 8dfbd3c8 c3e9d8c0 c3edffb0 00000055 b6add008 c7492880 c3e9d8c0
[  182.877353] 001: ff40: 00000817 c3e9d914 00000800 c010f04c c3edff5c c3e9d8c0 00000000 00000000
[  182.877361] 001: ff60: c3edff5c 00000817 c0c0afbc b6add008 c3edffb0 10c5387d 00000000 00000001
[  182.877369] 001: ff80: 00013698 c010f328 00000022 00000000 ffffffff 00000000 00501000 00012868
[  182.877377] 001: ffa0: 00040010 ffffffff 10c5387d c0102580 b6add008 ffffffff 00258000 00000000
[  182.877385] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  182.877393] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff 00000000 00000000
[  182.877402] 001: [<c01a2f00>] (__pagevec_lru_add_fn) from [<c01a3dbc>] (pagevec_lru_move_fn+0x68/0xa4)
[  182.877414] 001: [<c01a3dbc>] (pagevec_lru_move_fn) from [<c01a3ee0>] (__lru_cache_add+0x80/0xa0)
[  182.877424] 001: [<c01a3ee0>] (__lru_cache_add) from [<c01bc6e4>] (handle_mm_fault+0x30c/0x7b8)
[  182.877436] 001: [<c01bc6e4>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  182.877448] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  182.877458] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  182.877467] 001: Exception stack(0xc3edffb0 to 0xc3edfff8)
[  182.877474] 001: ffa0:                                     b6add008 ffffffff 00258000 00000000
[  182.877482] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  182.877489] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff
[  182.877497] 001: Code: e0203890 eb00363e e7963185 e0862185 (e5837004)
[  182.877505] 001: ---[ end trace 0000000000000002 ]---
[  182.877542] 001: ------------[ cut here ]------------
[  182.877546] 001: kernel BUG at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/kernel/locking/rtmutex.c:1047!
[  182.877551] 001: Internal error: Oops - BUG: 0 [#2] PREEMPT_RT SMP ARM
[  182.877556] 001: Modules linked in: sunxi_ce
[  182.877561] 001: CPU: 1 PID: 1251 Comm: stress Tainted: G    B D           5.4.61-rt37 #1
[  182.877566] 001: Hardware name: Generic DT based system
[  182.877569] 001: PC is at rt_spin_lock_slowlock_locked+0x48/0x1d0
[  182.877578] 001: LR is at __try_to_take_rt_mutex+0x44/0x148
[  182.877585] 001: pc : [<c0731030>]    lr : [<c01552b8>]    psr: 60040193
[  182.877589] 001: sp : c3edfc38  ip : 00000000  fp : c7baf1c0
[  182.877592] 001: r10: a0040113  r9 : 00000000  r8 : ffffe000
[  182.877595] 001: r7 : c7ac8d7c  r6 : c3edfc60  r5 : c7492880  r4 : c0c62800
[  182.877600] 001: r3 : 8dfbd3c8  r2 : c7492880  r1 : c7492880  r0 : 00000000
[  182.877604] 001: Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  182.877610] 001: Control: 10c5387d  Table: 43fa406a  DAC: 00000051
[  182.877613] 001: Process stress (pid: 1251, stack limit = 0xa4904f68)
[  182.877618] 001: Stack: (0xc3edfc38 to 0xc3ee0000)
[  182.877624] 001: fc20:                                                       0000902e c3ede000
[  182.877632] 001: fc40: c0c62800 a0040113 c7ac8d7c c01a2d98 00000000 c0c62818 c7baf1c0 c073120c
[  182.877641] 001: fc60: c3edfc60 00000000 00000000 c3edfc6c 000003e0 94594645 00000000 00000000
[  182.877649] 001: fc80: c3edfc01 c013b100 c0c62800 00000000 c0c61fc0 8dfbd3c8 c7ac8d78 00000000
[  182.877657] 001: fca0: c0c61fc0 c01a3da8 0000000f c0b38d54 c0c0659c 00000001 c3e9d914 00000001
[  182.877665] 001: fcc0: c3edfd64 00000568 ffffe000 c01a43cc c0b38d54 c0c0659c c3ede000 c3e9d914
[  182.877674] 001: fce0: 00000001 c01a4810 c3fbca18 c3e9d8c0 c3ede000 c01bffe4 c7492880 c073179c
[  182.877682] 001: fd00: c097e568 c095d219 c7492880 c0b3a080 c0c0659c c3ede000 00000001 c013c280
[  182.877690] 001: fd20: c3edfd1c 8dfbd3c8 00000000 8dfbd3c8 c3e9d8c0 00000000 ffffe000 8dfbd3c8
[  182.877699] 001: fd40: c3e9d8c0 00000000 ffffe000 c0116d48 c7492880 c3e9d8c0 ffffe000 c011c5a0
[  182.877706] 001: fd60: 0000000b 00000000 00000000 8dfbd3c8 0000000b c094bfe9 ffffe000 c010abdc
[  182.877714] 001: fd80: c3ede218 0000000b 00000817 00000104 c3edfe18 00000817 c3e9d8c0 c3e9d8c0
[  182.877723] 001: fda0: 00000817 c3e9d914 00000800 c010f48c c7492880 c010f198 c7bb36c0 c01cd938
[  182.877730] 001: fdc0: 00000281 c0b390bc c3edfe50 00000817 c0c0afbc 00000104 c3edfe18 00000000
[  182.877739] 001: fde0: c3ede000 c0c62818 c7baf1c0 c010f328 00000080 ffffffff c0b390bc 000000a0
[  182.877747] 001: fe00: c3edfdfc c01a2f00 60040113 ffffffff c3edfe4c c0102138 00000000 00000001
[  182.877755] 001: fe20: c0c62820 00000100 c7baf1c0 00000001 c0c62818 c7baf1c4 00000000 00000000
[  182.877763] 001: fe40: c0c62818 c7baf1c0 00000000 c3edfe68 c01b0898 c01a2f00 60040113 ffffffff
[  182.877771] 001: fe60: 00000051 bf000000 c7ac8d78 00000001 c0c61fc0 c7ac8d7c c01a2d98 c01a3dbc
[  182.877780] 001: fe80: 0000000f c0b38d54 c0b38d78 c0c0659c c7bb36c0 c7ac8d78 06f90000 c3fdc374
[  182.877788] 001: fea0: 00000800 c01a3ee0 45e3675f c3fbfb28 c3ede000 c7bb36c0 00000000 c3fdc000
[  182.877796] 001: fec0: c3fdc374 c01bc6e4 c3ede000 c3edff5c c3fbfb28 00000055 00000cc0 000b6add
[  182.877804] 001: fee0: b6add000 c3fa6da8 c3fa6da8 00000000 00000000 00000000 00000000 c3fdc374
[  182.877811] 001: ff00: c3e5c570 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  182.877819] 001: ff20: c3e9d914 8dfbd3c8 c3e9d8c0 c3edffb0 00000055 b6add008 c7492880 c3e9d8c0
[  182.877827] 001: ff40: 00000817 c3e9d914 00000800 c010f04c c3edff5c c3e9d8c0 00000000 00000000
[  182.877835] 001: ff60: c3edff5c 00000817 c0c0afbc b6add008 c3edffb0 10c5387d 00000000 00000001
[  182.877843] 001: ff80: 00013698 c010f328 00000022 00000000 ffffffff 00000000 00501000 00012868
[  182.877852] 001: ffa0: 00040010 ffffffff 10c5387d c0102580 b6add008 ffffffff 00258000 00000000
[  182.877860] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  182.877868] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff 00000000 00000000
[  182.877873] 001: [<c0731030>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  182.877886] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01a3da8>] (pagevec_lru_move_fn+0x54/0xa4)
[  182.877896] 001: [<c01a3da8>] (pagevec_lru_move_fn) from [<c01a43cc>] (lru_add_drain_cpu+0x28/0x13c)
[  182.877906] 001: [<c01a43cc>] (lru_add_drain_cpu) from [<c01a4810>] (lru_add_drain+0x28/0x48)
[  182.877916] 001: [<c01a4810>] (lru_add_drain) from [<c01bffe4>] (exit_mmap+0x6c/0x13c)
[  182.877925] 001: [<c01bffe4>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[  182.877935] 001: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[  182.877946] 001: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  182.877955] 001: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[  182.877965] 001: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[  182.877975] 001: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  182.877985] 001: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[  182.877994] 001: Exception stack(0xc3edfe18 to 0xc3edfe60)
[  182.877999] 001: fe00:                                                       00000000 00000001
[  182.878007] 001: fe20: c0c62820 00000100 c7baf1c0 00000001 c0c62818 c7baf1c4 00000000 00000000
[  182.878015] 001: fe40: c0c62818 c7baf1c0 00000000 c3edfe68 c01b0898 c01a2f00 60040113 ffffffff
[  182.878020] 001: [<c0102138>] (__dabt_svc) from [<c01a2f00>] (__pagevec_lru_add_fn+0x168/0x180)
[  182.878029] 001: [<c01a2f00>] (__pagevec_lru_add_fn) from [<c01a3dbc>] (pagevec_lru_move_fn+0x68/0xa4)
[  182.878039] 001: [<c01a3dbc>] (pagevec_lru_move_fn) from [<c01a3ee0>] (__lru_cache_add+0x80/0xa0)
[  182.878049] 001: [<c01a3ee0>] (__lru_cache_add) from [<c01bc6e4>] (handle_mm_fault+0x30c/0x7b8)
[  182.878060] 001: [<c01bc6e4>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  182.878070] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  182.878080] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  182.878088] 001: Exception stack(0xc3edffb0 to 0xc3edfff8)
[  182.878094] 001: ffa0:                                     b6add008 ffffffff 00258000 00000000
[  182.878102] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  182.878109] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff
[  182.878117] 001: Code: e594200c e3c22001 e1550002 1a000001 (e7f001f2)
[  182.878121] 001: ---[ end trace 0000000000000003 ]---
[  182.878124] 001: note: stress[1251] exited with preempt_count 1
[  182.878128] 001: Fixing recursive fault but reboot is needed!
[  203.908202] 001: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  203.908224] 001: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1037 P1251
[  203.908235] 001:     (detected by 1, t=2102 jiffies, g=877, q=14)
[  203.908242] 001: syslogd         D    0  1037      1 0x00000000
[  203.908256] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  203.908276] 001: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[  203.908289] 001: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  203.908300] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01a2ca4>] (__local_lock+0x28/0x4c)
[  203.908314] 001: [<c01a2ca4>] (__local_lock) from [<c01a3e8c>] (__lru_cache_add+0x2c/0xa0)
[  203.908325] 001: [<c01a3e8c>] (__lru_cache_add) from [<c01acab8>] (shmem_getpage_gfp+0x254/0x430)
[  203.908336] 001: [<c01acab8>] (shmem_getpage_gfp) from [<c01ad1d4>] (shmem_getpage+0x24/0x2c)
[  203.908345] 001: [<c01ad1d4>] (shmem_getpage) from [<c019a7cc>] (generic_perform_write+0xb0/0x1b4)
[  203.908357] 001: [<c019a7cc>] (generic_perform_write) from [<c019cf90>] (__generic_file_write_iter+0x94/0x168)
[  203.908369] 001: [<c019cf90>] (__generic_file_write_iter) from [<c019d0ac>] (generic_file_write_iter+0x48/0xac)
[  203.908380] 001: [<c019d0ac>] (generic_file_write_iter) from [<c01e1b34>] (__vfs_write+0xa0/0xe4)
[  203.908392] 001: [<c01e1b34>] (__vfs_write) from [<c01e2eec>] (vfs_write+0x8c/0xc8)
[  203.908400] 001: [<c01e2eec>] (vfs_write) from [<c01e3098>] (ksys_write+0x70/0xb8)
[  203.908408] 001: [<c01e3098>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  203.908418] 001: Exception stack(0xc3ef3fa8 to 0xc3ef3ff0)
[  203.908427] 001: 3fa0:                   00000000 00000003 00000003 015bf330 00000090 00032000
[  203.908435] 001: 3fc0: 00000000 00000003 015bf330 00000004 000ccc94 fffffc00 015bf130 bee36b74
[  203.908441] 001: 3fe0: 00000000 bee36a9c 0001a72c b6eebcc8
[  203.908448] 001: stress          D    0  1251   1250 0x00000000
[  203.908455] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  203.908465] 001: [<c072fcd8>] (schedule) from [<c011c32c>] (do_exit+0x13c/0x8f8)
[  203.908478] 001: [<c011c32c>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  203.908488] 001: [<c010abdc>] (die) from [<c010ae30>] (do_undefinstr+0x90/0x1b4)
[  203.908496] 001: [<c010ae30>] (do_undefinstr) from [<c01022d8>] (__und_svc_finish+0x0/0x48)
[  203.908504] 001: Exception stack(0xc3edfbe8 to 0xc3edfc30)
[  203.908512] 001: fbe0:                   00000000 c7492880 c7492880 8dfbd3c8 c0c62800 c7492880
[  203.908520] 001: fc00: c3edfc60 c7ac8d7c ffffe000 00000000 a0040113 c7baf1c0 00000000 c3edfc38
[  203.908527] 001: fc20: c01552b8 c0731030 60040193 ffffffff
[  203.908531] 001: [<c01022d8>] (__und_svc_finish) from [<c0731030>] (rt_spin_lock_slowlock_locked+0x48/0x1d0)
[  203.908541] 001: [<c0731030>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  203.908552] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01a3da8>] (pagevec_lru_move_fn+0x54/0xa4)
[  203.908564] 001: [<c01a3da8>] (pagevec_lru_move_fn) from [<c01a43cc>] (lru_add_drain_cpu+0x28/0x13c)
[  203.908574] 001: [<c01a43cc>] (lru_add_drain_cpu) from [<c01a4810>] (lru_add_drain+0x28/0x48)
[  203.908583] 001: [<c01a4810>] (lru_add_drain) from [<c01bffe4>] (exit_mmap+0x6c/0x13c)
[  203.908595] 001: [<c01bffe4>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[  203.908604] 001: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[  203.908614] 001: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  203.908623] 001: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[  203.908634] 001: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[  203.908645] 001: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  203.908655] 001: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[  203.908663] 001: Exception stack(0xc3edfe18 to 0xc3edfe60)
[  203.908668] 001: fe00:                                                       00000000 00000001
[  203.908677] 001: fe20: c0c62820 00000100 c7baf1c0 00000001 c0c62818 c7baf1c4 00000000 00000000
[  203.908685] 001: fe40: c0c62818 c7baf1c0 00000000 c3edfe68 c01b0898 c01a2f00 60040113 ffffffff
[  203.908690] 001: [<c0102138>] (__dabt_svc) from [<c01a2f00>] (__pagevec_lru_add_fn+0x168/0x180)
[  203.908699] 001: [<c01a2f00>] (__pagevec_lru_add_fn) from [<c01a3dbc>] (pagevec_lru_move_fn+0x68/0xa4)
[  203.908709] 001: [<c01a3dbc>] (pagevec_lru_move_fn) from [<c01a3ee0>] (__lru_cache_add+0x80/0xa0)
[  203.908718] 001: [<c01a3ee0>] (__lru_cache_add) from [<c01bc6e4>] (handle_mm_fault+0x30c/0x7b8)
[  203.908730] 001: [<c01bc6e4>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  203.908740] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  203.908750] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  203.908759] 001: Exception stack(0xc3edffb0 to 0xc3edfff8)
[  203.908765] 001: ffa0:                                     b6add008 ffffffff 00258000 00000000
[  203.908774] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  203.908781] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff
[  266.958202] 001: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  266.958222] 001: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1037 P1251
[  266.958234] 001:     (detected by 1, t=8407 jiffies, g=877, q=101)
[  266.958241] 001: syslogd         D    0  1037      1 0x00000000
[  266.958255] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  266.958275] 001: [<c072fcd8>] (schedule) from [<c07310b8>] (rt_spin_lock_slowlock_locked+0xd0/0x1d0)
[  266.958288] 001: [<c07310b8>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  266.958299] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01a2ca4>] (__local_lock+0x28/0x4c)
[  266.958313] 001: [<c01a2ca4>] (__local_lock) from [<c01a3e8c>] (__lru_cache_add+0x2c/0xa0)
[  266.958324] 001: [<c01a3e8c>] (__lru_cache_add) from [<c01acab8>] (shmem_getpage_gfp+0x254/0x430)
[  266.958335] 001: [<c01acab8>] (shmem_getpage_gfp) from [<c01ad1d4>] (shmem_getpage+0x24/0x2c)
[  266.958344] 001: [<c01ad1d4>] (shmem_getpage) from [<c019a7cc>] (generic_perform_write+0xb0/0x1b4)
[  266.958356] 001: [<c019a7cc>] (generic_perform_write) from [<c019cf90>] (__generic_file_write_iter+0x94/0x168)
[  266.958369] 001: [<c019cf90>] (__generic_file_write_iter) from [<c019d0ac>] (generic_file_write_iter+0x48/0xac)
[  266.958380] 001: [<c019d0ac>] (generic_file_write_iter) from [<c01e1b34>] (__vfs_write+0xa0/0xe4)
[  266.958392] 001: [<c01e1b34>] (__vfs_write) from [<c01e2eec>] (vfs_write+0x8c/0xc8)
[  266.958399] 001: [<c01e2eec>] (vfs_write) from [<c01e3098>] (ksys_write+0x70/0xb8)
[  266.958408] 001: [<c01e3098>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[  266.958418] 001: Exception stack(0xc3ef3fa8 to 0xc3ef3ff0)
[  266.958426] 001: 3fa0:                   00000000 00000003 00000003 015bf330 00000090 00032000
[  266.958435] 001: 3fc0: 00000000 00000003 015bf330 00000004 000ccc94 fffffc00 015bf130 bee36b74
[  266.958441] 001: 3fe0: 00000000 bee36a9c 0001a72c b6eebcc8
[  266.958448] 001: stress          D    0  1251   1250 0x00000000
[  266.958456] 001: [<c072fba0>] (__schedule) from [<c072fcd8>] (schedule+0xbc/0xf8)
[  266.958466] 001: [<c072fcd8>] (schedule) from [<c011c32c>] (do_exit+0x13c/0x8f8)
[  266.958479] 001: [<c011c32c>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  266.958489] 001: [<c010abdc>] (die) from [<c010ae30>] (do_undefinstr+0x90/0x1b4)
[  266.958497] 001: [<c010ae30>] (do_undefinstr) from [<c01022d8>] (__und_svc_finish+0x0/0x48)
[  266.958505] 001: Exception stack(0xc3edfbe8 to 0xc3edfc30)
[  266.958513] 001: fbe0:                   00000000 c7492880 c7492880 8dfbd3c8 c0c62800 c7492880
[  266.958522] 001: fc00: c3edfc60 c7ac8d7c ffffe000 00000000 a0040113 c7baf1c0 00000000 c3edfc38
[  266.958528] 001: fc20: c01552b8 c0731030 60040193 ffffffff
[  266.958532] 001: [<c01022d8>] (__und_svc_finish) from [<c0731030>] (rt_spin_lock_slowlock_locked+0x48/0x1d0)
[  266.958542] 001: [<c0731030>] (rt_spin_lock_slowlock_locked) from [<c073120c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  266.958553] 001: [<c073120c>] (rt_spin_lock_slowlock) from [<c01a3da8>] (pagevec_lru_move_fn+0x54/0xa4)
[  266.958564] 001: [<c01a3da8>] (pagevec_lru_move_fn) from [<c01a43cc>] (lru_add_drain_cpu+0x28/0x13c)
[  266.958574] 001: [<c01a43cc>] (lru_add_drain_cpu) from [<c01a4810>] (lru_add_drain+0x28/0x48)
[  266.958584] 001: [<c01a4810>] (lru_add_drain) from [<c01bffe4>] (exit_mmap+0x6c/0x13c)
[  266.958595] 001: [<c01bffe4>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[  266.958604] 001: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[  266.958613] 001: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  266.958621] 001: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[  266.958632] 001: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[  266.958643] 001: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  266.958653] 001: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[  266.958662] 001: Exception stack(0xc3edfe18 to 0xc3edfe60)
[  266.958667] 001: fe00:                                                       00000000 00000001
[  266.958675] 001: fe20: c0c62820 00000100 c7baf1c0 00000001 c0c62818 c7baf1c4 00000000 00000000
[  266.958683] 001: fe40: c0c62818 c7baf1c0 00000000 c3edfe68 c01b0898 c01a2f00 60040113 ffffffff
[  266.958688] 001: [<c0102138>] (__dabt_svc) from [<c01a2f00>] (__pagevec_lru_add_fn+0x168/0x180)
[  266.958697] 001: [<c01a2f00>] (__pagevec_lru_add_fn) from [<c01a3dbc>] (pagevec_lru_move_fn+0x68/0xa4)
[  266.958707] 001: [<c01a3dbc>] (pagevec_lru_move_fn) from [<c01a3ee0>] (__lru_cache_add+0x80/0xa0)
[  266.958717] 001: [<c01a3ee0>] (__lru_cache_add) from [<c01bc6e4>] (handle_mm_fault+0x30c/0x7b8)
[  266.958729] 001: [<c01bc6e4>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  266.958739] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  266.958749] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  266.958758] 001: Exception stack(0xc3edffb0 to 0xc3edfff8)
[  266.958764] 001: ffa0:                                     b6add008 ffffffff 00258000 00000000
[  266.958773] 001: ffc0: 000250ac 000250a0 00001000 b6886008 000250a0 00000000 00000001 00013698
[  266.958780] 001: ffe0: 0000005a bed88b98 b6e1835f 00012868 00040010 ffffffff

默

stress 压测 CPU 60s，看起来正常。

~# stress -c 2 -t 60
stress: info: [1243] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd
stress: info: [1243] successful run completed in 60s

默

使用uboot memtester 测试通过了，看起来内存至少是OK的。

=> memtester  64M 1
memtester version 4.2.1 (32-bit)
Copyright (C) 2010 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).

sysconf(_SC_PAGE_SIZE) not supported; using pagesize of 8192
pagesizemask is 0xffffe000
want 64MB (67108864 bytes)
got  62MB (65257472 bytes), start addr: 0x4407b008
Loop 1/1:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Solid Bits          : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Bit Flip            : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Done.

默

有时候启动偶尔会如下错误：

mount: mounting /dev/mmcblk0p7 on /run/media/mmcblk0p7 failed: Invalid argument
mount: mounting /dev/mmcblk0p3 on /run/media/mmcblk0p3 failed: Invalid argument
[   16.428743] 001: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
mount: mounting /dev/mmcblk0p6 on /run/media/mmcblk0p6 failed: Invalid argument
mount: mounting /dev/mmcblk0p4 on /run/media/mmcblk0p4 failed: Invalid argument
mount: mounting /dev/mmcblk0p2 on /run/media/mmcblk0p2 failed: Invalid argument
mount: mounting /dev/mmcblk0p8 on /run/media/mmcblk0p8 failed: Invalid argument
/etc/init.d/rcS: line 49: Launcher:
Welcome to Allwinner KunoOS Platform
T113-MY-LCPI login: root (automatic login)

[   16.850514] 001: 8<--- cut here ---
[   16.850529] 001: Unable to handle kernel paging request at virtual address 90f00000
[   16.850540] 001: pgd = b08628a5
[   16.850550] 001: [90f00000] *pgd=00000000
[   16.850557] 001: Internal error: Oops: 5 [#1] PREEMPT_RT SMP ARM
[   16.850564] 001: Modules linked in: sunxi_ce
[   16.850573] 001: CPU: 1 PID: 1234 Comm: sh Not tainted 5.4.61-rt37 #4
[   16.850580] 001: Hardware name: Generic DT based system
[   16.850583] 001: PC is at page_add_new_anon_rmap+0xc/0x98
[   16.850598] 001: LR is at wp_page_copy+0x284/0x368
[   16.850605] 001: pc : [<c01c4958>]    lr : [<c01b9990>]    psr: 60010113
[   16.850610] 001: sp : c3ecfe60  ip : c09d14bc  fp : c3f9a000
[   16.850613] 001: r10: 00000124  r9 : c6afed80  r8 : c3efa220
[   16.850617] 001: r7 : c7b0ddc0  r6 : 40b6e71f  r5 : c7bc2e60  r4 : 90f00000
[   16.850622] 001: r3 : 00000000  r2 : b6f24000  r1 : 00000000  r0 : c7b0ddc0
[   16.850627] 001: Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   16.850635] 001: Control: 10c5387d  Table: 43fd006a  DAC: 00000051
[   16.850638] 001: Process sh (pid: 1234, stack limit = 0x8da3ee64)
[   16.850644] 001: Stack: (0xc3ecfe60 to 0xc3ed0000)
[   16.850654] 001: fe60: c3ecfed0 c7bc2e60 40b6e71f c01b9990 c3ecfed0 c3f9a490 c7494a40 c3ecfed0
[   16.850663] 001: fe80: 00000001 c3ece000 c3efa220 c6afed80 00000817 c6afedd4 00000800 c01ba5e0
[   16.850671] 001: fea0: 00000002 4bff3d07 c3fd2db8 c3efa220 c3ece000 00000055 c6afed80 00000817
[   16.850680] 001: fec0: c6afedd4 c01bcb10 00000000 b6f22388 c3efa220 00000055 00100cca 00000018
[   16.850689] 001: fee0: b6f24000 c3fd2db8 c3fd2db8 465f37dd 00000000 00000000 c7bc2e60 c3f9a490
[   16.850696] 001: ff00: c3eca270 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.850705] 001: ff20: 00000000 4bff3d07 00000000 c3ecffb0 00000055 b6f2451c c7494a40 c6afed80
[   16.850713] 001: ff40: 00000817 c6afedd4 00000800 c010f04c c0983558 c0962209 c7494a40 00000000
[   16.850722] 001: ff60: c7494a40 00000817 c0c0afbc b6f2451c c3ecffb0 10c5387d b6e44000 b6f22320
[   16.850730] 001: ff80: 000b8100 c010f328 00000000 00000000 00000000 00000000 00000000 b6dcac0a
[   16.850738] 001: ffa0: 20010030 ffffffff 10c5387d c0102580 00000000 00000000 00000000 b6f24058
[   16.850746] 001: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[   16.850755] 001: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff 00000000 00000000
[   16.850766] 001: [<c01c4958>] (page_add_new_anon_rmap) from [<c01b9990>] (wp_page_copy+0x284/0x368)
[   16.850780] 001: [<c01b9990>] (wp_page_copy) from [<c01ba5e0>] (do_wp_page+0x24c/0x268)
[   16.850791] 001: [<c01ba5e0>] (do_wp_page) from [<c01bcb10>] (handle_mm_fault+0x738/0x7b8)
[   16.850802] 001: [<c01bcb10>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[   16.850816] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   16.850827] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[   16.850837] 001: Exception stack(0xc3ecffb0 to 0xc3ecfff8)
[   16.850844] 001: ffa0:                                     00000000 00000000 00000000 b6f24058
[   16.850852] 001: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[   16.850859] 001: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff
[   16.850868] 001: Code: eaffffb4 e92d4070 e1a04001 e1a01003 (e5943000)
[   16.850875] 001: ---[ end trace 0000000000000002 ]---
[   16.850966] 001: ------------[ cut here ]------------
[   16.850971] 001: kernel BUG at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4-rt-from-t113i/kernel/locking/rtmutex.c:1047!
[   16.850977] 001: Internal error: Oops - BUG: 0 [#2] PREEMPT_RT SMP ARM
[   16.850983] 001: Modules linked in: sunxi_ce
[   16.850989] 001: CPU: 1 PID: 1234 Comm: sh Tainted: G      D           5.4.61-rt37 #4
[   16.850994] 001: Hardware name: Generic DT based system
[   16.850997] 001: PC is at rt_spin_lock_slowlock_locked+0x48/0x1d0
[   16.851007] 001: LR is at __try_to_take_rt_mutex+0x44/0x148
[   16.851014] 001: pc : [<c0743590>]    lr : [<c01552b8>]    psr: 60010193
[   16.851018] 001: sp : c3ecfc00  ip : 00000000  fp : 40ba759f
[   16.851021] 001: r10: a0010113  r9 : 00000000  r8 : ffffe000
[   16.851025] 001: r7 : b6e33000  r6 : c3ecfc28  r5 : c7494a40  r4 : c3eca270
[   16.851029] 001: r3 : 4bff3d07  r2 : c7494a40  r1 : c7494a40  r0 : 00000000
[   16.851033] 001: Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   16.851039] 001: Control: 10c5387d  Table: 43fd006a  DAC: 00000051
[   16.851042] 001: Process sh (pid: 1234, stack limit = 0x8da3ee64)
[   16.851047] 001: Stack: (0xc3ecfc00 to 0xc3ed0000)
[   16.851057] 001: fc00: 00000000 c3ece000 c3eca270 a0010113 b6e33000 c3ef1aa0 c3fd2dc0 c3f9a000
[   16.851065] 001: fc20: 40ba759f c074376c c3ecfc28 c013c280 c0983569 c3ecfc34 fffffffd 4bff3d07
[   16.851074] 001: fc40: 00000000 b6e00000 c3ecfc01 c013b100 c3eca270 b6e00000 00000000 4bff3d07
[   16.851082] 001: fc60: c3ecfcf0 b6e00000 00000000 c01b9f08 00000000 b6e33000 c3ece000 00000000
[   16.851090] 001: fc80: c6afed80 c3eca270 c3fd2db8 b6dd0000 c0c0659c 00000000 00000000 00000000
[   16.851098] 001: fca0: 00000000 4bff3d07 c0c0659c c3ef1aa0 ffffffff c3ecfcf0 00000000 00000000
[   16.851107] 001: fcc0: c3ecfd5c 00000568 ffffe000 c01ba21c 00000000 c3ef1088 c3ef1088 c6afed80
[   16.851115] 001: fce0: c3ece000 c6afedd4 00000001 c01c0014 c6afed80 000b0000 ffffffff c0962209
[   16.851123] 001: fd00: 00000001 c3efb000 c3efb000 00000008 00000008 c7b0d6c0 c7bc6da0 c7bc67a0
[   16.851131] 001: fd20: c7bf07c0 c7bf33e0 c7bc6cc0 c7befb80 c7bc2f80 4bff3d07 c6afed80 00000000
[   16.851140] 001: fd40: ffffe000 c0116d48 c7494a40 c6afed80 ffffe000 c011c5a0 0000000b 00000000
[   16.851148] 001: fd60: 00000000 4bff3d07 0000000b c0950fd9 ffffe000 c010abdc c3ece218 0000000b
[   16.851156] 001: fd80: 00000005 90f00000 c3ecfe10 00000005 c6afed80 c6afed80 00000005 c6afedd4
[   16.851164] 001: fda0: 00000000 c010f48c c7494a40 c010f198 c7494a40 000000a0 c7494a40 c0b390bc
[   16.851172] 001: fdc0: c3ecfdfc 00000005 c0c0af9c 90f00000 c3ecfe10 c3efa220 c3ece000 00000124
[   16.851181] 001: fde0: c3f9a000 c010f328 00000800 c01ce028 c3efa110 c6afed80 00000122 c01c4958
[   16.851189] 001: fe00: 60010113 ffffffff c3ecfe44 c0102138 c7b0ddc0 00000000 b6f24000 00000000
[   16.851197] 001: fe20: 90f00000 c7bc2e60 40b6e71f c7b0ddc0 c3efa220 c6afed80 00000124 c3f9a000
[   16.851206] 001: fe40: c09d14bc c3ecfe60 c01b9990 c01c4958 60010113 ffffffff 00000051 bf000000
[   16.851214] 001: fe60: c3ecfed0 c7bc2e60 40b6e71f c01b9990 c3ecfed0 c3f9a490 c7494a40 c3ecfed0
[   16.851223] 001: fe80: 00000001 c3ece000 c3efa220 c6afed80 00000817 c6afedd4 00000800 c01ba5e0
[   16.851231] 001: fea0: 00000002 4bff3d07 c3fd2db8 c3efa220 c3ece000 00000055 c6afed80 00000817
[   16.851239] 001: fec0: c6afedd4 c01bcb10 00000000 b6f22388 c3efa220 00000055 00100cca 00000018
[   16.851247] 001: fee0: b6f24000 c3fd2db8 c3fd2db8 465f37dd 00000000 00000000 c7bc2e60 c3f9a490
[   16.851255] 001: ff00: c3eca270 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   16.851263] 001: ff20: 00000000 4bff3d07 00000000 c3ecffb0 00000055 b6f2451c c7494a40 c6afed80
[   16.851271] 001: ff40: 00000817 c6afedd4 00000800 c010f04c c0983558 c0962209 c7494a40 00000000
[   16.851280] 001: ff60: c7494a40 00000817 c0c0afbc b6f2451c c3ecffb0 10c5387d b6e44000 b6f22320
[   16.851287] 001: ff80: 000b8100 c010f328 00000000 00000000 00000000 00000000 00000000 b6dcac0a
[   16.851296] 001: ffa0: 20010030 ffffffff 10c5387d c0102580 00000000 00000000 00000000 b6f24058
[   16.851303] 001: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[   16.851312] 001: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff 00000000 00000000
[   16.851318] 001: [<c0743590>] (rt_spin_lock_slowlock_locked) from [<c074376c>] (rt_spin_lock_slowlock+0x54/0x7c)
[   16.851331] 001: [<c074376c>] (rt_spin_lock_slowlock) from [<c01b9f08>] (unmap_page_range+0x260/0x428)
[   16.851343] 001: [<c01b9f08>] (unmap_page_range) from [<c01ba21c>] (unmap_vmas+0x44/0x54)
[   16.851353] 001: [<c01ba21c>] (unmap_vmas) from [<c01c0014>] (exit_mmap+0x9c/0x13c)
[   16.851363] 001: [<c01c0014>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[   16.851373] 001: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[   16.851384] 001: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[   16.851394] 001: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[   16.851405] 001: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[   16.851416] 001: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   16.851426] 001: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[   16.851436] 001: Exception stack(0xc3ecfe10 to 0xc3ecfe58)
[   16.851442] 001: fe00:                                     c7b0ddc0 00000000 b6f24000 00000000
[   16.851451] 001: fe20: 90f00000 c7bc2e60 40b6e71f c7b0ddc0 c3efa220 c6afed80 00000124 c3f9a000
[   16.851458] 001: fe40: c09d14bc c3ecfe60 c01b9990 c01c4958 60010113 ffffffff
[   16.851463] 001: [<c0102138>] (__dabt_svc) from [<c01c4958>] (page_add_new_anon_rmap+0xc/0x98)
[   16.851473] 001: [<c01c4958>] (page_add_new_anon_rmap) from [<c01b9990>] (wp_page_copy+0x284/0x368)
[   16.851483] 001: [<c01b9990>] (wp_page_copy) from [<c01ba5e0>] (do_wp_page+0x24c/0x268)
[   16.851493] 001: [<c01ba5e0>] (do_wp_page) from [<c01bcb10>] (handle_mm_fault+0x738/0x7b8)
[   16.851504] 001: [<c01bcb10>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[   16.851514] 001: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   16.851525] 001: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[   16.851534] 001: Exception stack(0xc3ecffb0 to 0xc3ecfff8)
[   16.851540] 001: ffa0:                                     00000000 00000000 00000000 b6f24058
[   16.851549] 001: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[   16.851556] 001: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff
[   16.851563] 001: Code: e594200c e3c22001 e1550002 1a000001 (e7f001f2)
[   16.851567] 001: ---[ end trace 0000000000000003 ]---
[   16.851571] 001: note: sh[1234] exited with preempt_count 1
[   16.851574] 001: Fixing recursive fault but reboot is needed!
[   17.962660] 001: 8<--- cut here ---
[   17.962674] 001: Unable to handle kernel paging request at virtual address cf4036c4
[   17.962684] 001: pgd = 95bdc962
[   17.962694] 001: [cf4036c4] *pgd=00000000
[   17.962701] 001: Internal error: Oops: 5 [#3] PREEMPT_RT SMP ARM
[   17.962708] 001: Modules linked in: sunxi_ce
[   17.962716] 001: CPU: 1 PID: 1136 Comm: udevd Tainted: G      D           5.4.61-rt37 #4
[   17.962723] 001: Hardware name: Generic DT based system
[   17.962727] 001: PC is at kmem_cache_free+0x24/0x1ac
[   17.962740] 001: LR is at do_exit+0x3f4/0x8f8
[   17.962748] 001: pc : [<c01dab40>]    lr : [<c011c5e4>]    psr: 600b0013
[   17.962752] 001: sp : c6827f20  ip : a00b0013  fp : 00961008
[   17.962756] 001: r10: 00000568  r9 : c6827f6c  r8 : c6826000
[   17.962760] 001: r7 : c3e8a714  r6 : c6826000  r5 : c74e3c00  r4 : c772a1c0
[   17.962764] 001: r3 : 3bddeb0d  r2 : 3bddeb0d  r1 : c74e3c00  r0 : cf4036c0
[   17.962769] 001: Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   17.962776] 001: Control: 10c5387d  Table: 43fac06a  DAC: 00000051
[   17.962779] 001: Process udevd (pid: 1136, stack limit = 0xe46879bb)
[   17.962785] 001: Stack: (0xc6827f20 to 0xc6828000)
[   17.962795] 001: 7f20: c6827f34 c6827f6c c011c5e4 c01ff8c4 c7685500 c6827f34 c6827f34 3bddeb0d
[   17.962804] 001: 7f40: c74e3c00 c772a1c0 c3e8a6c0 c6826000 c3e8a714 00000001 c6827f6c 00000568
[   17.962812] 001: 7f60: 00961008 c011c5e4 00000000 c772a58c c772a1c0 3bddeb0d c7489b00 000000f8
[   17.962821] 001: 7f80: 00961008 c011d624 00056360 00000000 000563e0 000000f8 c0101228 c011d6a0
[   17.962829] 001: 7fa0: 00056360 c0101000 00056360 00000000 00000000 009613d8 00000001 00000000
[   17.962837] 001: 7fc0: 00056360 00000000 000563e0 000000f8 befce398 00000000 00000001 00961008
[   17.962845] 001: 7fe0: 000000f8 befce344 b6eb0d89 b6e56a26 800b0030 00000000 00000000 00000000
[   17.962856] 001: [<c01dab40>] (kmem_cache_free) from [<c011c5e4>] (do_exit+0x3f4/0x8f8)
** 3 printk messages dropped **
[   17.962902] 001: ---[ end trace 0000000000000004 ]---
[   17.962906] 001: Fixing recursive fault but reboot is needed!
[   18.155784] 000: 8<--- cut here ---
[   18.155793] 000: Unable to handle kernel paging request at virtual address cf4036c0
[   18.155799] 000: pgd = 96f8b9ce
[   18.155808] 000: [cf4036c0] *pgd=00000000
[   18.155814] 000: Internal error: Oops: 5 [#4] PREEMPT_RT SMP ARM
[   18.155820] 000: Modules linked in: sunxi_ce
[   18.155827] 000: CPU: 0 PID: 324 Comm: kworker/u4:2 Tainted: G      D           5.4.61-rt37 #4
[   18.155833] 000: Hardware name: Generic DT based system
[   18.155851] 000: Workqueue: events_unbound call_usermodehelper_exec_work
[   18.155854] 000: PC is at kmem_cache_alloc+0x30/0x180
[   18.155863] 000: LR is at slab_pre_alloc_hook+0x18/0x2c
[   18.155868] 000: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a00b0013
[   18.155872] 000: sp : c77f5df8  ip : c76e3628  fp : 00000000
[   18.155876] 000: r10: 00808100  r9 : c77f5df8  r8 : c77f4000
[   18.155880] 000: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c74921c0
[   18.155884] 000: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   18.155889] 000: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   18.155895] 000: Control: 10c5387d  Table: 46a5c06a  DAC: 00000051
[   18.155898] 000: Process kworker/u4:2 (pid: 324, stack limit = 0x9a29ce66)
[   18.155904] 000: Stack: (0xc77f5df8 to 0xc77f6000)
[   18.155911] 000: 5de0:                                                       c0c6e4a4 c74921c0
[   18.155919] 000: 5e00: c0c11bf8 00000000 c77f4000 c77f5ee0 c7492630 00808100 00000000 c020e138
[   18.155928] 000: 5e20: c74921c0 c0c11bf8 00000000 c77f4000 c77f5ee0 c0117910 c76a9440 c0b3a080
[   18.155936] 000: 5e40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c749254c
[   18.155943] 000: 5e60: 00000000 00000000 00000000 00000000 c764a448 c7723cc3 000003d7 c77f4000
[   18.155952] 000: 5e80: 00000000 c4092a80 c77f4000 00808100 00000000 c4092a84 c77f5ee0 c01187a8
[   18.155960] 000: 5ea0: 00000000 c77f4000 c77f5f24 c7abf710 c0c0646c c7723cc3 a0006cdb c77f4000
[   18.155969] 000: 5ec0: 00000011 c4092a80 c012ceb4 00000000 00000000 c4092a84 00000000 c01189fc
[   18.155976] 000: 5ee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c4092a80
[   18.155985] 000: 5f00: 00000000 00000000 c7abf080 c7723cc3 c76a988c c4092a80 c77f4000 c4092a80
[   18.155993] 000: 5f20: c7408000 c012ce80 c4092a80 c7723cc3 00000000 c76ecc80 c7406200 c01303fc
[   18.156002] 000: 5f40: c76ecc80 c4092a80 c76ecc80 c76ecc94 c7406200 c77f4000 c7406218 c0c04100
[   18.156010] 000: 5f60: c0c6ed14 c01309b0 00000000 c74e1580 c77f4000 c76e2640 c76ecc80 c753fec4
[   18.156018] 000: 5f80: c01307bc c74e159c 00000000 c01354a0 c76e2640 c0135384 00000000 00000000
[   18.156026] 000: 5fa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   18.156033] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   18.156040] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   18.156050] 000: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   18.156063] 000: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   18.156075] 000: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   18.156084] 000: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   18.156094] 000: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   18.156105] 000: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   18.156117] 000: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   18.156127] 000: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   18.156140] 000: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   18.156149] 000: Exception stack(0xc77f5fb0 to 0xc77f5ff8)
[   18.156156] 000: 5fa0:                                     00000000 00000000 00000000 00000000
[   18.156163] 000: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   18.156169] 000: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   18.156178] 000: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   18.156184] 000: ---[ end trace 0000000000000005 ]---
[   18.156188] 000: note: kworker/u4:2[324] exited with preempt_count 1
[   18.156650] 000: 8<--- cut here ---
[   18.156657] 000: Unable to handle kernel paging request at virtual address cf4036c0
[   18.156663] 000: pgd = c8d2bc99
[   18.156672] 000: [cf4036c0] *pgd=00000000
[   18.156677] 000: Internal error: Oops: 5 [#5] PREEMPT_RT SMP ARM
[   18.156683] 000: Modules linked in: sunxi_ce
[   18.156690] 000: CPU: 0 PID: 1053 Comm: udevd Tainted: G      D           5.4.61-rt37 #4
[   18.156696] 000: Hardware name: Generic DT based system
[   18.156699] 000: PC is at kmem_cache_alloc+0x30/0x180
[   18.156708] 000: LR is at slab_pre_alloc_hook+0x18/0x2c
[   18.156713] 000: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a0030013
[   18.156717] 000: sp : c3f15e78  ip : c76e3b28  fp : 00000000
[   18.156720] 000: r10: 01200000  r9 : c3f15e78  r8 : c3f14000
[   18.156724] 000: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c7493600
[   18.156728] 000: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   18.156733] 000: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   18.156739] 000: Control: 10c5387d  Table: 43f8806a  DAC: 00000051
[   18.156742] 000: Process udevd (pid: 1053, stack limit = 0xff0cbf7f)
[   18.156747] 000: Stack: (0xc3f15e78 to 0xc3f16000)
[   18.156753] 000: 5e60:                                                       c0c6e4a4 c7493600
[   18.156761] 000: 5e80: c74e38c0 00000000 c3f14000 c3f15f60 c7493a70 01200000 00000000 c020e138
[   18.156770] 000: 5ea0: c7493600 c74e38c0 00000000 c3f14000 c3f15f60 c0117910 c0983558 c0962209
[   18.156777] 000: 5ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c749398c
[   18.156785] 000: 5ee0: 00000000 00000000 00000000 00000000 c74a5e48 f70cb566 00000004 c3f14000
[   18.156793] 000: 5f00: 00000000 00000000 c3f14000 01200000 00000000 00000078 c3f15f60 c01187a8
[   18.156802] 000: 5f20: c7408a10 c3f14000 c737bd00 c01e40b0 c7408a10 f70cb566 00000000 c3f14000
[   18.156810] 000: 5f40: 00000011 00000000 00000000 00000000 c3f14000 00000078 00961008 c0118b58
[   18.156817] 000: 5f60: 01200000 00000000 00000000 b6fe8078 00000000 00000011 00000000 00000000
[   18.156825] 000: 5f80: 00000000 00000000 c737bc80 f70cb566 b6fe8078 00000000 b6fe84d0 00000078
[   18.156833] 000: 5fa0: c0101228 c0101000 b6fe8078 00000000 01200011 00000000 00000000 00000000
[   18.156842] 000: 5fc0: b6fe8078 00000000 b6fe84d0 00000078 00000000 b6f2a000 b6fe8010 00961008
[   18.156850] 000: 5fe0: 00000078 befce320 b6eb0bcd b6e56a26 20030030 01200011 00000000 00000000
[   18.156858] 000: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   18.156869] 000: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   18.156879] 000: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   18.156889] 000: [<c01187a8>] (_do_fork) from [<c0118b58>] (sys_clone+0x80/0x9c)
[   18.156898] 000: [<c0118b58>] (sys_clone) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   18.156906] 000: Exception stack(0xc3f15fa8 to 0xc3f15ff0)
[   18.156914] 000: 5fa0:                   b6fe8078 00000000 01200011 00000000 00000000 00000000
[   18.156922] 000: 5fc0: b6fe8078 00000000 b6fe84d0 00000078 00000000 b6f2a000 b6fe8010 00961008
[   18.156928] 000: 5fe0: 00000078 befce320 b6eb0bcd b6e56a26
[   18.156937] 000: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   18.156942] 000: ---[ end trace 0000000000000006 ]---
[   18.156945] 000: note: udevd[1053] exited with preempt_count 1
[   18.157628] 000: 8<--- cut here ---
[   18.157634] 000: Unable to handle kernel paging request at virtual address cf4036c4
[   18.157640] 000: pgd = c8d2bc99
[   18.157648] 000: [cf4036c4] *pgd=00000000
[   18.157653] 000: Internal error: Oops: 5 [#6] PREEMPT_RT SMP ARM
[   18.157658] 000: Modules linked in: sunxi_ce
[   18.157664] 000: CPU: 0 PID: 1053 Comm: udevd Tainted: G      D           5.4.61-rt37 #4
[   18.157670] 000: Hardware name: Generic DT based system
[   18.157673] 000: PC is at kmem_cache_free+0x24/0x1ac
[   18.157681] 000: LR is at do_exit+0x3f4/0x8f8
[   18.157688] 000: pc : [<c01dab40>]    lr : [<c011c5e4>]    psr: 60030113
[   18.157692] 000: sp : c3f15d30  ip : a0030113  fp : ffffe000
[   18.157695] 000: r10: 00000568  r9 : c3f15d7c  r8 : c3f14000
[   18.157699] 000: r7 : c3e8a954  r6 : c3f14000  r5 : c74e38c0  r4 : c76ad7c0
[   18.157703] 000: r3 : f70cb566  r2 : f70cb566  r1 : c74e38c0  r0 : cf4036c0
[   18.157708] 000: Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   18.157714] 000: Control: 10c5387d  Table: 43f8806a  DAC: 00000051
[   18.157717] 000: Process udevd (pid: 1053, stack limit = 0xff0cbf7f)
[   18.157722] 000: Stack: (0xc3f15d30 to 0xc3f16000)
[   18.157729] 000: 5d20:                                     c3f15d44 c3f15d7c c011c5e4 c01ff8c4
[   18.157738] 000: 5d40: c7685500 c3f15d44 c3f15d44 f70cb566 c74e38c0 c76ad7c0 c3e8a900 c3f14000
[   18.157746] 000: 5d60: c3e8a954 00000001 c3f15d7c 00000568 ffffe000 c011c5e4 0000000b 00000000
[   18.157755] 000: 5d80: 00000001 f70cb566 0000000b c0950fd9 ffffe000 c010abdc c3f14218 0000000b
[   18.157763] 000: 5da0: 00000005 cf4036c0 c3f15e28 00000005 c3e8a900 c3f14000 c3f14000 01200000
[   18.157771] 000: 5dc0: 00000000 c010f48c 00000005 c010f214 cf4036c0 00000005 c3f15e28 00000005
[   18.157780] 000: 5de0: c0004000 00000000 c3f15e28 c010f2e4 00000005 c0c0af9c cf4036c0 c010f328
[   18.157788] 000: 5e00: c0c65f54 c0b390bc c76ad7c0 f70cb566 c76ad7c0 c01dba4c a0030013 ffffffff
[   18.157797] 000: 5e20: c3f15e5c c0102138 cf4036c0 00000cc0 00000000 00000001 c7493600 cf4036c0
[   18.157805] 000: 5e40: 00000cc0 c020e138 c3f14000 c3f15e78 01200000 00000000 c76e3b28 c3f15e78
[   18.157814] 000: 5e60: c01d9568 c01dba4c a0030013 ffffffff 00000051 bf000000 c0c6e4a4 c7493600
[   18.157822] 000: 5e80: c74e38c0 00000000 c3f14000 c3f15f60 c7493a70 01200000 00000000 c020e138
[   18.157831] 000: 5ea0: c7493600 c74e38c0 00000000 c3f14000 c3f15f60 c0117910 c0983558 c0962209
[   18.157838] 000: 5ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c749398c
[   18.157846] 000: 5ee0: 00000000 00000000 00000000 00000000 c74a5e48 f70cb566 00000004 c3f14000
[   18.157854] 000: 5f00: 00000000 00000000 c3f14000 01200000 00000000 00000078 c3f15f60 c01187a8
[   18.157863] 000: 5f20: c7408a10 c3f14000 c737bd00 c01e40b0 c7408a10 f70cb566 00000000 c3f14000
[   18.157871] 000: 5f40: 00000011 00000000 00000000 00000000 c3f14000 00000078 00961008 c0118b58
[   18.157879] 000: 5f60: 01200000 00000000 00000000 b6fe8078 00000000 00000011 00000000 00000000
[   18.157887] 000: 5f80: 00000000 00000000 c737bc80 f70cb566 b6fe8078 00000000 b6fe84d0 00000078
[   18.157895] 000: 5fa0: c0101228 c0101000 b6fe8078 00000000 01200011 00000000 00000000 00000000
[   18.157903] 000: 5fc0: b6fe8078 00000000 b6fe84d0 00000078 00000000 b6f2a000 b6fe8010 00961008
[   18.157912] 000: 5fe0: 00000078 befce320 b6eb0bcd b6e56a26 20030030 01200011 00000000 00000000
[   18.157918] 000: [<c01dab40>] (kmem_cache_free) from [<c011c5e4>] (do_exit+0x3f4/0x8f8)
[   18.157930] 000: [<c011c5e4>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[   18.157941] 000: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[   18.157953] 000: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f214>] (do_bad_area+0x68/0x70)
[   18.157964] 000: [<c010f214>] (do_bad_area) from [<c010f2e4>] (do_translation_fault+0xa8/0xb8)
[   18.157974] 000: [<c010f2e4>] (do_translation_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   18.157985] 000: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[   18.157994] 000: Exception stack(0xc3f15e28 to 0xc3f15e70)
[   18.158002] 000: 5e20:                   cf4036c0 00000cc0 00000000 00000001 c7493600 cf4036c0
[   18.158010] 000: 5e40: 00000cc0 c020e138 c3f14000 c3f15e78 01200000 00000000 c76e3b28 c3f15e78
[   18.158016] 000: 5e60: c01d9568 c01dba4c a0030013 ffffffff
[   18.158021] 000: [<c0102138>] (__dabt_svc) from [<c01dba4c>] (kmem_cache_alloc+0x30/0x180)
[   18.158031] 000: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   18.158041] 000: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   18.158050] 000: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   18.158059] 000: [<c01187a8>] (_do_fork) from [<c0118b58>] (sys_clone+0x80/0x9c)
[   18.158068] 000: [<c0118b58>] (sys_clone) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[   18.158076] 000: Exception stack(0xc3f15fa8 to 0xc3f15ff0)
[   18.158083] 000: 5fa0:                   b6fe8078 00000000 01200011 00000000 00000000 00000000
[   18.158091] 000: 5fc0: b6fe8078 00000000 b6fe84d0 00000078 00000000 b6f2a000 b6fe8010 00961008
[   18.158097] 000: 5fe0: 00000078 befce320 b6eb0bcd b6e56a26
[   18.158104] 000: Code: e1a05001 e3c8803f e598301c e58d301c (e5903004)
[   18.158110] 000: ---[ end trace 0000000000000007 ]---
[   18.158113] 000: Fixing recursive fault but reboot is needed!
[   21.355710] 001: 8<--- cut here ---
[   21.355720] 001: Unable to handle kernel paging request at virtual address cf4036c0
[   21.355727] 001: pgd = 96f8b9ce
[   21.355737] 001: [cf4036c0] *pgd=00000000
[   21.355744] 001: Internal error: Oops: 5 [#7] PREEMPT_RT SMP ARM
[   21.355750] 001: Modules linked in: sunxi_ce
[   21.355758] 001: CPU: 1 PID: 572 Comm: kworker/u4:3 Tainted: G      D           5.4.61-rt37 #4
[   21.355765] 001: Hardware name: Generic DT based system
[   21.355784] 001: Workqueue: events_unbound call_usermodehelper_exec_work
[   21.355788] 001: PC is at kmem_cache_alloc+0x30/0x180
[   21.355796] 001: LR is at slab_pre_alloc_hook+0x18/0x2c
[   21.355802] 001: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a00b0013
[   21.355806] 001: sp : c77e5df8  ip : c77968a8  fp : 00000000
[   21.355810] 001: r10: 00808100  r9 : c77e5df8  r8 : c77e4000
[   21.355814] 001: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c6c83600
[   21.355818] 001: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   21.355823] 001: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   21.355829] 001: Control: 10c5387d  Table: 46a5c06a  DAC: 00000051
[   21.355832] 001: Process kworker/u4:3 (pid: 572, stack limit = 0x0c730e20)
[   21.355838] 001: Stack: (0xc77e5df8 to 0xc77e6000)
[   21.355844] 001: 5de0:                                                       c0c6e4a4 c6c83600
[   21.355853] 001: 5e00: c0c11bf8 00000000 c77e4000 c77e5ee0 c6c83a70 00808100 00000000 c020e138
[   21.355861] 001: 5e20: c6c83600 c0c11bf8 00000000 c77e4000 c77e5ee0 c0117910 c0983558 c0962209
[   21.355869] 001: 5e40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c6c8398c
[   21.355877] 001: 5e60: 00000000 00000000 00000000 00000000 c6c5ad48 ffeae6fd 000003ad c77e4000
[   21.355885] 001: 5e80: 00000000 c4092580 c77e4000 00808100 00000000 c4092584 c77e5ee0 c01187a8
[   21.355894] 001: 5ea0: 00000004 c7abf080 00000001 c08010c0 c77e5f54 ffeae6fd c7abf0c0 c77e4000
[   21.355902] 001: 5ec0: 00000011 c4092580 c012ceb4 00000000 00000000 c4092584 00000000 c01189fc
[   21.355910] 001: 5ee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c4092580
[   21.355918] 001: 5f00: 00000000 00000000 c7abf080 ffeae6fd c6c84e8c c4092580 c77e4000 c4092580
[   21.355926] 001: 5f20: c7408000 c012ce80 c4092580 ffeae6fd 00000000 c749b500 c7406200 c01303fc
[   21.355935] 001: 5f40: c749b500 c4092580 c749b500 c749b514 c7406200 c77e4000 c7406218 c0c04100
[   21.355943] 001: 5f60: c0c6ed14 c01309b0 00000000 c74e1cc0 c77e4000 c74e1c80 c749b500 c753fec4
[   21.355952] 001: 5f80: c01307bc c74e1cdc 00000000 c01354a0 c74e1c80 c0135384 00000000 00000000
[   21.355959] 001: 5fa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   21.355966] 001: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   21.355974] 001: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   21.355984] 001: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   21.355997] 001: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   21.356009] 001: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   21.356019] 001: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   21.356028] 001: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   21.356039] 001: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   21.356051] 001: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   21.356062] 001: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   21.356074] 001: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   21.356083] 001: Exception stack(0xc77e5fb0 to 0xc77e5ff8)
[   21.356089] 001: 5fa0:                                     00000000 00000000 00000000 00000000
[   21.356097] 001: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   21.356103] 001: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   21.356112] 001: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   21.356135] 001: ---[ end trace 0000000000000008 ]---
[   21.356141] 001: note: kworker/u4:3[572] exited with preempt_count 1
[   24.555694] 001: 8<--- cut here ---
[   24.555704] 001: Unable to handle kernel paging request at virtual address cf4036c0
[   24.555711] 001: pgd = 96f8b9ce
[   24.555721] 001: [cf4036c0] *pgd=00000000
[   24.555727] 001: Internal error: Oops: 5 [#8] PREEMPT_RT SMP ARM
[   24.555733] 001: Modules linked in: sunxi_ce
[   24.555741] 001: CPU: 1 PID: 25 Comm: kworker/u4:1 Tainted: G      D           5.4.61-rt37 #4
[   24.555747] 001: Hardware name: Generic DT based system
[   24.555766] 001: Workqueue: events_unbound call_usermodehelper_exec_work
[   24.555770] 001: PC is at kmem_cache_alloc+0x30/0x180
[   24.555777] 001: LR is at slab_pre_alloc_hook+0x18/0x2c
[   24.555783] 001: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a00b0013
[   24.555788] 001: sp : c753fdf8  ip : c7796da8  fp : 00000000
[   24.555791] 001: r10: 00808100  r9 : c753fdf8  r8 : c753e000
[   24.555795] 001: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c6c84380
[   24.555800] 001: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   24.555805] 001: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   24.555811] 001: Control: 10c5387d  Table: 46a5c06a  DAC: 00000051
[   24.555814] 001: Process kworker/u4:1 (pid: 25, stack limit = 0xfbcbc091)
[   24.555820] 001: Stack: (0xc753fdf8 to 0xc7540000)
[   24.555826] 001: fde0:                                                       c0c6e4a4 c6c84380
[   24.555835] 001: fe00: c0c11bf8 00000000 c753e000 c753fee0 c6c847f0 00808100 00000000 c020e138
[   24.555844] 001: fe20: c6c84380 c0c11bf8 00000000 c753e000 c753fee0 c0117910 c0983558 c0962209
[   24.555852] 001: fe40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c6c8470c
[   24.555860] 001: fe60: 00000000 00000000 00000000 00000000 c74a4348 a4b0d3b6 0000019c c753e000
[   24.555868] 001: fe80: 00000000 c4092f00 c753e000 00808100 00000000 c4092f04 c753fee0 c01187a8
[   24.555877] 001: fea0: 00000005 c7abf080 00000001 c08010c0 c753ff54 a4b0d3b6 c7abf0c0 c753e000
[   24.555885] 001: fec0: 00000011 c4092f00 c012ceb4 00000000 00000000 c4092f04 c7406258 c01189fc
[   24.555893] 001: fee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c4092f00
[   24.555901] 001: ff00: 00000000 00000000 c7abf080 a4b0d3b6 c7490b0c c4092f00 c753e000 c4092f00
[   24.555910] 001: ff20: c7408000 c012ce80 c4092f00 a4b0d3b6 00000000 c749b200 c7406200 c01303fc
[   24.555918] 001: ff40: c749b200 c4092f00 c749b200 c749b214 c7406200 c753e000 c7406218 c0c04100
[   24.555927] 001: ff60: c0c6ed14 c01309b0 00000000 c74e15c0 c753e000 c74e1580 c749b200 c7457ec4
[   24.555935] 001: ff80: c01307bc c74e15dc 00000000 c01354a0 c74e1580 c0135384 00000000 00000000
[   24.555942] 001: ffa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   24.555949] 001: ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   24.555957] 001: ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   24.555967] 001: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   24.555980] 001: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   24.555991] 001: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   24.556001] 001: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   24.556010] 001: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   24.556021] 001: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   24.556033] 001: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   24.556044] 001: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   24.556056] 001: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   24.556065] 001: Exception stack(0xc753ffb0 to 0xc753fff8)
[   24.556071] 001: ffa0:                                     00000000 00000000 00000000 00000000
[   24.556079] 001: ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   24.556085] 001: ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   24.556095] 001: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   24.556101] 001: ---[ end trace 0000000000000009 ]---
[   24.556106] 001: note: kworker/u4:1[25] exited with preempt_count 1
[   27.755844] 000: 8<--- cut here ---
[   27.755854] 000: Unable to handle kernel paging request at virtual address cf4036c0
[   27.755859] 000: pgd = 96f8b9ce
[   27.755869] 000: [cf4036c0] *pgd=00000000
[   27.755876] 000: Internal error: Oops: 5 [#9] PREEMPT_RT SMP ARM
[   27.755882] 000: Modules linked in: sunxi_ce
[   27.755891] 000: CPU: 0 PID: 7 Comm: kworker/u4:0 Tainted: G      D           5.4.61-rt37 #4
[   27.755897] 000: Hardware name: Generic DT based system
[   27.755916] 000: Workqueue: events_unbound call_usermodehelper_exec_work
[   27.755919] 000: PC is at kmem_cache_alloc+0x30/0x180
[   27.755927] 000: LR is at slab_pre_alloc_hook+0x18/0x2c
[   27.755932] 000: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a0070013
[   27.755937] 000: sp : c7457df8  ip : c76e3128  fp : 00000000
[   27.755941] 000: r10: 00808100  r9 : c7457df8  r8 : c7456000
[   27.755945] 000: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c7491440
[   27.755949] 000: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   27.755953] 000: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   27.755960] 000: Control: 10c5387d  Table: 46a5c06a  DAC: 00000051
[   27.755964] 000: Process kworker/u4:0 (pid: 7, stack limit = 0xd6790308)
[   27.755969] 000: Stack: (0xc7457df8 to 0xc7458000)
[   27.755975] 000: 7de0:                                                       c0c6e4a4 c7491440
[   27.755984] 000: 7e00: c0c11bf8 00000000 c7456000 c7457ee0 c74918b0 00808100 00000000 c020e138
[   27.755992] 000: 7e20: c7491440 c0c11bf8 00000000 c7456000 c7457ee0 c0117910 00000006 c7aca080
[   27.756000] 000: 7e40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c74917cc
[   27.756008] 000: 7e60: 00000000 00000000 00000000 00000000 c7449248 a5303614 c7aca0c0 c7456000
[   27.756016] 000: 7e80: 00000000 c4092300 c7456000 00808100 00000000 c4092304 c7457ee0 c01187a8
[   27.756024] 000: 7ea0: c7aca080 c7457ef4 00000001 c7aca080 c7456000 a5303614 c74972c0 c7456000
[   27.756033] 000: 7ec0: 00000011 c4092300 c012ceb4 00000000 00000000 c4092304 c7406258 c01189fc
[   27.756041] 000: 7ee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c4092300
[   27.756049] 000: 7f00: 00000000 00000000 c0b37600 a5303614 c7456000 c4092300 c7456000 c4092300
[   27.756057] 000: 7f20: c7408000 c012ce80 c4092300 a5303614 00000000 c740d680 c7406200 c01303fc
[   27.756066] 000: 7f40: c740d680 c4092300 c740d680 c740d694 c7406200 c7456000 c7406218 c0c04100
[   27.756074] 000: 7f60: c0c6ed14 c01309b0 00000000 c741d600 c7456000 c741d4c0 c740d680 c742deac
[   27.756082] 000: 7f80: c01307bc c741d61c 00000000 c01354a0 c741d4c0 c0135384 00000000 00000000
[   27.756090] 000: 7fa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   27.756097] 000: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   27.756104] 000: 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   27.756114] 000: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   27.756127] 000: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   27.756139] 000: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   27.756149] 000: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   27.756158] 000: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   27.756169] 000: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   27.756181] 000: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   27.756192] 000: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   27.756204] 000: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   27.756213] 000: Exception stack(0xc7457fb0 to 0xc7457ff8)
[   27.756219] 000: 7fa0:                                     00000000 00000000 00000000 00000000
[   27.756227] 000: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   27.756233] 000: 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   27.756242] 000: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   27.756249] 000: ---[ end trace 000000000000000a ]---
[   27.756253] 000: note: kworker/u4:0[7] exited with preempt_count 1
[   30.955719] 001: 8<--- cut here ---
[   30.955730] 001: Unable to handle kernel paging request at virtual address cf4036c0
[   30.955736] 001: pgd = 7bb6d094
[   30.955746] 001: [cf4036c0] *pgd=00000000
[   30.955753] 001: Internal error: Oops: 5 [#10] PREEMPT_RT SMP ARM
[   30.955760] 001: Modules linked in: sunxi_ce
[   30.955768] 001: CPU: 1 PID: 1235 Comm: kworker/u4:4 Tainted: G      D           5.4.61-rt37 #4
[   30.955775] 001: Hardware name: Generic DT based system
[   30.955793] 001: Workqueue: events_unbound call_usermodehelper_exec_work
[   30.955797] 001: PC is at kmem_cache_alloc+0x30/0x180
[   30.955805] 001: LR is at slab_pre_alloc_hook+0x18/0x2c
[   30.955811] 001: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a0000013
[   30.955815] 001: sp : c3f05df8  ip : c7796768  fp : 00000000
[   30.955819] 001: r10: 00808100  r9 : c3f05df8  r8 : c3f04000
[   30.955823] 001: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c6c857c0
[   30.955828] 001: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   30.955832] 001: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   30.955839] 001: Control: 10c5387d  Table: 4681c06a  DAC: 00000051
[   30.955842] 001: Process kworker/u4:4 (pid: 1235, stack limit = 0x8cc6be5f)
[   30.955847] 001: Stack: (0xc3f05df8 to 0xc3f06000)
[   30.955853] 001: 5de0:                                                       c0c6e4a4 c6c857c0
[   30.955862] 001: 5e00: c0c11bf8 00000000 c3f04000 c3f05ee0 c6c85c30 00808100 00000000 c020e138
[   30.955871] 001: 5e20: c6c857c0 c0c11bf8 00000000 c3f04000 c3f05ee0 c0117910 c74972c0 c0b3a080
[   30.955879] 001: 5e40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c6c85b4c
[   30.955887] 001: 5e60: 00000000 00000000 00000000 00000000 c6c58648 d20947c3 000000bf c3f04000
[   30.955895] 001: 5e80: 00000000 c75a6e80 c3f04000 00808100 00000000 c75a6e84 c3f05ee0 c01187a8
[   30.955903] 001: 5ea0: 00000000 c3f04000 c3f05f24 c7abf710 c0c0646c d20947c3 089402f4 c3f04000
[   30.955912] 001: 5ec0: 00000011 c75a6e80 c012ceb4 00000000 00000000 c75a6e84 c7406258 c01189fc
[   30.955919] 001: 5ee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c75a6e80
[   30.955928] 001: 5f00: 00000000 00000000 c7abf080 d20947c3 c749770c c75a6e80 c3f04000 c75a6e80
[   30.955936] 001: 5f20: c7408000 c012ce80 c75a6e80 d20947c3 00000000 c7620a80 c7406200 c01303fc
[   30.955944] 001: 5f40: c7620a80 c75a6e80 c7620a80 c7620a94 c7406200 c3f04000 c7406218 c0c04100
[   30.955953] 001: 5f60: c0c6ed14 c01309b0 00000000 c688e780 c3f04000 c688e740 c7620a80 c7457ec4
[   30.955961] 001: 5f80: c01307bc c688e79c 00000000 c01354a0 c688e740 c0135384 00000000 00000000
[   30.955968] 001: 5fa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   30.955976] 001: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   30.955983] 001: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   30.955993] 001: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   30.956006] 001: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   30.956018] 001: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   30.956027] 001: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   30.956037] 001: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   30.956047] 001: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   30.956059] 001: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   30.956070] 001: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   30.956082] 001: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   30.956091] 001: Exception stack(0xc3f05fb0 to 0xc3f05ff8)
[   30.956097] 001: 5fa0:                                     00000000 00000000 00000000 00000000
[   30.956104] 001: 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   30.956110] 001: 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   30.956119] 001: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   30.956126] 001: ---[ end trace 000000000000000b ]---
[   30.956131] 001: note: kworker/u4:4[1235] exited with preempt_count 1
[   32.555562] 000: usb1-vbus: disabling
[   34.155855] 001: 8<--- cut here ---
[   34.155862] 001: Unable to handle kernel paging request at virtual address cf4036c0
[   34.155868] 001: pgd = 96f8b9ce
[   34.155878] 001: [cf4036c0] *pgd=00000000
[   34.155885] 001: Internal error: Oops: 5 [#11] PREEMPT_RT SMP ARM
[   34.155892] 001: Modules linked in: sunxi_ce
[   34.155900] 001: CPU: 1 PID: 1236 Comm: kworker/u4:5 Tainted: G      D           5.4.61-rt37 #4
[   34.155906] 001: Hardware name: Generic DT based system
[   34.155924] 001: Workqueue: events_unbound call_usermodehelper_exec_work
[   34.155927] 001: PC is at kmem_cache_alloc+0x30/0x180
[   34.155935] 001: LR is at slab_pre_alloc_hook+0x18/0x2c
[   34.155940] 001: pc : [<c01dba4c>]    lr : [<c01d9568>]    psr: a0070013
[   34.155945] 001: sp : c6b37df8  ip : c77969e8  fp : 00000000
[   34.155949] 001: r10: 00808100  r9 : c6b37df8  r8 : c6b36000
[   34.155953] 001: r7 : c020e138  r6 : 00000cc0  r5 : cf4036c0  r4 : c6c81440
[   34.155957] 001: r3 : 00000001  r2 : 00000000  r1 : 00000cc0  r0 : cf4036c0
[   34.155962] 001: Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   34.155968] 001: Control: 10c5387d  Table: 46a5c06a  DAC: 00000051
[   34.155971] 001: Process kworker/u4:5 (pid: 1236, stack limit = 0x7f646364)
[   34.155977] 001: Stack: (0xc6b37df8 to 0xc6b38000)
[   34.155983] 001: 7de0:                                                       c0c6e4a4 c6c81440
[   34.155992] 001: 7e00: c0c11bf8 00000000 c6b36000 c6b37ee0 c6c818b0 00808100 00000000 c020e138
[   34.156000] 001: 7e20: c6c81440 c0c11bf8 00000000 c6b36000 c6b37ee0 c0117910 00000007 c7abf080
[   34.156008] 001: 7e40: 00000000 00000000 00000000 00000000 00008000 00000000 00000000 c6c817cc
[   34.156016] 001: 7e60: 00000000 00000000 00000000 00000000 c6c59248 4a660a48 c7abf0c0 c6b36000
[   34.156024] 001: 7e80: 00000000 c75a6d80 c6b36000 00808100 00000000 c75a6d84 c6b37ee0 c01187a8
[   34.156033] 001: 7ea0: c7abf080 c6b37ef4 00000000 c7abf080 c6b36000 4a660a48 c74957c0 c6b36000
[   34.156041] 001: 7ec0: 00000011 c75a6d80 c012ceb4 00000000 00000000 c75a6d84 c7406258 c01189fc
[   34.156049] 001: 7ee0: 00808100 00000000 00000000 00000000 00000000 00000011 c012ceb4 c75a6d80
[   34.156057] 001: 7f00: 00000000 00000000 c0b37600 4a660a48 c6b36000 c75a6d80 c6b36000 c75a6d80
[   34.156066] 001: 7f20: c7408000 c012ce80 c75a6d80 4a660a48 00000000 c7620a00 c7406200 c01303fc
[   34.156074] 001: 7f40: c7620a00 c75a6d80 c7620a00 c7620a14 c7406200 c6b36000 c7406218 c0c04100
[   34.156083] 001: 7f60: c0c6ed14 c01309b0 00000000 c6892e80 c6b36000 c688e800 c7620a00 c3f05ec4
[   34.156091] 001: 7f80: c01307bc c6892e9c 00000000 c01354a0 c688e800 c0135384 00000000 00000000
[   34.156099] 001: 7fa0: 00000000 00000000 00000000 c01010bc 00000000 00000000 00000000 00000000
[   34.156106] 001: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.156113] 001: 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   34.156124] 001: [<c01dba4c>] (kmem_cache_alloc) from [<c020e138>] (copy_fs_struct+0x18/0xb8)
[   34.156136] 001: [<c020e138>] (copy_fs_struct) from [<c0117910>] (copy_process+0x644/0x1330)
[   34.156148] 001: [<c0117910>] (copy_process) from [<c01187a8>] (_do_fork+0x94/0x254)
[   34.156158] 001: [<c01187a8>] (_do_fork) from [<c01189fc>] (kernel_thread+0x64/0x84)
[   34.156167] 001: [<c01189fc>] (kernel_thread) from [<c012ce80>] (call_usermodehelper_exec_work+0x94/0xc8)
[   34.156177] 001: [<c012ce80>] (call_usermodehelper_exec_work) from [<c01303fc>] (process_one_work+0x16c/0x208)
[   34.156189] 001: [<c01303fc>] (process_one_work) from [<c01309b0>] (worker_thread+0x1f4/0x2d4)
[   34.156200] 001: [<c01309b0>] (worker_thread) from [<c01354a0>] (kthread+0x11c/0x138)
[   34.156213] 001: [<c01354a0>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
[   34.156221] 001: Exception stack(0xc6b37fb0 to 0xc6b37ff8)
[   34.156227] 001: 7fa0:                                     00000000 00000000 00000000 00000000
[   34.156235] 001: 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   34.156241] 001: 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   34.156250] 001: Code: e3c8803f e5983004 e2833001 e5883004 (e5953000)
[   34.156257] 001: ---[ end trace 000000000000000c ]---
[   34.156261] 001: note: kworker/u4:5[1236] exited with preempt_count 1
[   37.855514] 000: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[   37.855535] 000: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1234
[   37.855544] 000:     (detected by 0, t=2102 jiffies, g=-275, q=400)
[   37.855551] 000: sh              D    0  1234   1233 0x00000000
[   37.855565] 000: [<c0742100>] (__schedule) from [<c0742238>] (schedule+0xbc/0xf8)
[   37.855584] 000: [<c0742238>] (schedule) from [<c011c32c>] (do_exit+0x13c/0x8f8)
[   37.855599] 000: [<c011c32c>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[   37.855611] 000: [<c010abdc>] (die) from [<c010ae30>] (do_undefinstr+0x90/0x1b4)
[   37.855620] 000: [<c010ae30>] (do_undefinstr) from [<c01022d8>] (__und_svc_finish+0x0/0x48)
[   37.855630] 000: Exception stack(0xc3ecfbb0 to 0xc3ecfbf8)
[   37.855637] 000: fba0:                                     00000000 c7494a40 c7494a40 4bff3d07
[   37.855646] 000: fbc0: c3eca270 c7494a40 c3ecfc28 b6e33000 ffffe000 00000000 a0010113 40ba759f
[   37.855654] 000: fbe0: 00000000 c3ecfc00 c01552b8 c0743590 60010193 ffffffff
[   37.855659] 000: [<c01022d8>] (__und_svc_finish) from [<c0743590>] (rt_spin_lock_slowlock_locked+0x48/0x1d0)
[   37.855671] 000: [<c0743590>] (rt_spin_lock_slowlock_locked) from [<c074376c>] (rt_spin_lock_slowlock+0x54/0x7c)
[   37.855682] 000: [<c074376c>] (rt_spin_lock_slowlock) from [<c01b9f08>] (unmap_page_range+0x260/0x428)
[   37.855696] 000: [<c01b9f08>] (unmap_page_range) from [<c01ba21c>] (unmap_vmas+0x44/0x54)
[   37.855706] 000: [<c01ba21c>] (unmap_vmas) from [<c01c0014>] (exit_mmap+0x9c/0x13c)
[   37.855717] 000: [<c01c0014>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[   37.855727] 000: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[   37.855736] 000: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[   37.855746] 000: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[   37.855757] 000: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[   37.855768] 000: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   37.855779] 000: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[   37.855788] 000: Exception stack(0xc3ecfe10 to 0xc3ecfe58)
[   37.855795] 000: fe00:                                     c7b0ddc0 00000000 b6f24000 00000000
[   37.855803] 000: fe20: 90f00000 c7bc2e60 40b6e71f c7b0ddc0 c3efa220 c6afed80 00000124 c3f9a000
[   37.855811] 000: fe40: c09d14bc c3ecfe60 c01b9990 c01c4958 60010113 ffffffff
[   37.855816] 000: [<c0102138>] (__dabt_svc) from [<c01c4958>] (page_add_new_anon_rmap+0xc/0x98)
[   37.855826] 000: [<c01c4958>] (page_add_new_anon_rmap) from [<c01b9990>] (wp_page_copy+0x284/0x368)
[   37.855836] 000: [<c01b9990>] (wp_page_copy) from [<c01ba5e0>] (do_wp_page+0x24c/0x268)
[   37.855846] 000: [<c01ba5e0>] (do_wp_page) from [<c01bcb10>] (handle_mm_fault+0x738/0x7b8)
[   37.855858] 000: [<c01bcb10>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[   37.855868] 000: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[   37.855879] 000: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[   37.855888] 000: Exception stack(0xc3ecffb0 to 0xc3ecfff8)
[   37.855894] 000: ffa0:                                     00000000 00000000 00000000 b6f24058
[   37.855902] 000: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[   37.855909] 000: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff
[  100.905515] 000: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  100.905537] 000: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1234
[  100.905546] 000:     (detected by 0, t=8407 jiffies, g=-275, q=638)
[  100.905553] 000: sh              D    0  1234   1233 0x00000000
[  100.905566] 000: [<c0742100>] (__schedule) from [<c0742238>] (schedule+0xbc/0xf8)
[  100.905586] 000: [<c0742238>] (schedule) from [<c011c32c>] (do_exit+0x13c/0x8f8)
[  100.905602] 000: [<c011c32c>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  100.905614] 000: [<c010abdc>] (die) from [<c010ae30>] (do_undefinstr+0x90/0x1b4)
[  100.905623] 000: [<c010ae30>] (do_undefinstr) from [<c01022d8>] (__und_svc_finish+0x0/0x48)
[  100.905632] 000: Exception stack(0xc3ecfbb0 to 0xc3ecfbf8)
[  100.905640] 000: fba0:                                     00000000 c7494a40 c7494a40 4bff3d07
[  100.905649] 000: fbc0: c3eca270 c7494a40 c3ecfc28 b6e33000 ffffe000 00000000 a0010113 40ba759f
[  100.905656] 000: fbe0: 00000000 c3ecfc00 c01552b8 c0743590 60010193 ffffffff
[  100.905661] 000: [<c01022d8>] (__und_svc_finish) from [<c0743590>] (rt_spin_lock_slowlock_locked+0x48/0x1d0)
[  100.905673] 000: [<c0743590>] (rt_spin_lock_slowlock_locked) from [<c074376c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  100.905685] 000: [<c074376c>] (rt_spin_lock_slowlock) from [<c01b9f08>] (unmap_page_range+0x260/0x428)
[  100.905699] 000: [<c01b9f08>] (unmap_page_range) from [<c01ba21c>] (unmap_vmas+0x44/0x54)
[  100.905710] 000: [<c01ba21c>] (unmap_vmas) from [<c01c0014>] (exit_mmap+0x9c/0x13c)
[  100.905721] 000: [<c01c0014>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[  100.905730] 000: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[  100.905740] 000: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  100.905749] 000: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[  100.905761] 000: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[  100.905772] 000: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  100.905784] 000: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[  100.905792] 000: Exception stack(0xc3ecfe10 to 0xc3ecfe58)
[  100.905799] 000: fe00:                                     c7b0ddc0 00000000 b6f24000 00000000
[  100.905808] 000: fe20: 90f00000 c7bc2e60 40b6e71f c7b0ddc0 c3efa220 c6afed80 00000124 c3f9a000
[  100.905815] 000: fe40: c09d14bc c3ecfe60 c01b9990 c01c4958 60010113 ffffffff
[  100.905820] 000: [<c0102138>] (__dabt_svc) from [<c01c4958>] (page_add_new_anon_rmap+0xc/0x98)
[  100.905831] 000: [<c01c4958>] (page_add_new_anon_rmap) from [<c01b9990>] (wp_page_copy+0x284/0x368)
[  100.905841] 000: [<c01b9990>] (wp_page_copy) from [<c01ba5e0>] (do_wp_page+0x24c/0x268)
[  100.905851] 000: [<c01ba5e0>] (do_wp_page) from [<c01bcb10>] (handle_mm_fault+0x738/0x7b8)
[  100.905863] 000: [<c01bcb10>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  100.905873] 000: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  100.905884] 000: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  100.905893] 000: Exception stack(0xc3ecffb0 to 0xc3ecfff8)
[  100.905899] 000: ffa0:                                     00000000 00000000 00000000 b6f24058
[  100.905907] 000: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[  100.905915] 000: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff


-sh-4.4#
-sh-4.4# [  163.955514] 000: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[  163.955536] 000: rcu:        Tasks blocked on level-0 rcu_node (CPUs 0-1): P1234
[  163.955545] 000:     (detected by 0, t=14712 jiffies, g=-275, q=715)
[  163.955552] 000: sh              D    0  1234   1233 0x00000000
[  163.955565] 000: [<c0742100>] (__schedule) from [<c0742238>] (schedule+0xbc/0xf8)
[  163.955585] 000: [<c0742238>] (schedule) from [<c011c32c>] (do_exit+0x13c/0x8f8)
[  163.955600] 000: [<c011c32c>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  163.955612] 000: [<c010abdc>] (die) from [<c010ae30>] (do_undefinstr+0x90/0x1b4)
[  163.955621] 000: [<c010ae30>] (do_undefinstr) from [<c01022d8>] (__und_svc_finish+0x0/0x48)
[  163.955631] 000: Exception stack(0xc3ecfbb0 to 0xc3ecfbf8)
[  163.955639] 000: fba0:                                     00000000 c7494a40 c7494a40 4bff3d07
[  163.955648] 000: fbc0: c3eca270 c7494a40 c3ecfc28 b6e33000 ffffe000 00000000 a0010113 40ba759f
[  163.955655] 000: fbe0: 00000000 c3ecfc00 c01552b8 c0743590 60010193 ffffffff
[  163.955660] 000: [<c01022d8>] (__und_svc_finish) from [<c0743590>] (rt_spin_lock_slowlock_locked+0x48/0x1d0)
[  163.955672] 000: [<c0743590>] (rt_spin_lock_slowlock_locked) from [<c074376c>] (rt_spin_lock_slowlock+0x54/0x7c)
[  163.955684] 000: [<c074376c>] (rt_spin_lock_slowlock) from [<c01b9f08>] (unmap_page_range+0x260/0x428)
[  163.955697] 000: [<c01b9f08>] (unmap_page_range) from [<c01ba21c>] (unmap_vmas+0x44/0x54)
[  163.955708] 000: [<c01ba21c>] (unmap_vmas) from [<c01c0014>] (exit_mmap+0x9c/0x13c)
[  163.955719] 000: [<c01c0014>] (exit_mmap) from [<c0116d48>] (__mmput+0x24/0xa4)
[  163.955728] 000: [<c0116d48>] (__mmput) from [<c011c5a0>] (do_exit+0x3b0/0x8f8)
[  163.955738] 000: [<c011c5a0>] (do_exit) from [<c010abdc>] (die+0x260/0x2e4)
[  163.955747] 000: [<c010abdc>] (die) from [<c010f48c>] (__do_kernel_fault.part.0+0x60/0x88)
[  163.955759] 000: [<c010f48c>] (__do_kernel_fault.part.0) from [<c010f198>] (do_page_fault+0x288/0x29c)
[  163.955770] 000: [<c010f198>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  163.955781] 000: [<c010f328>] (do_DataAbort) from [<c0102138>] (__dabt_svc+0x58/0x80)
[  163.955790] 000: Exception stack(0xc3ecfe10 to 0xc3ecfe58)
[  163.955797] 000: fe00:                                     c7b0ddc0 00000000 b6f24000 00000000
[  163.955806] 000: fe20: 90f00000 c7bc2e60 40b6e71f c7b0ddc0 c3efa220 c6afed80 00000124 c3f9a000
[  163.955814] 000: fe40: c09d14bc c3ecfe60 c01b9990 c01c4958 60010113 ffffffff
[  163.955818] 000: [<c0102138>] (__dabt_svc) from [<c01c4958>] (page_add_new_anon_rmap+0xc/0x98)
[  163.955829] 000: [<c01c4958>] (page_add_new_anon_rmap) from [<c01b9990>] (wp_page_copy+0x284/0x368)
[  163.955840] 000: [<c01b9990>] (wp_page_copy) from [<c01ba5e0>] (do_wp_page+0x24c/0x268)
[  163.955850] 000: [<c01ba5e0>] (do_wp_page) from [<c01bcb10>] (handle_mm_fault+0x738/0x7b8)
[  163.955862] 000: [<c01bcb10>] (handle_mm_fault) from [<c010f04c>] (do_page_fault+0x13c/0x29c)
[  163.955873] 000: [<c010f04c>] (do_page_fault) from [<c010f328>] (do_DataAbort+0x34/0xb4)
[  163.955884] 000: [<c010f328>] (do_DataAbort) from [<c0102580>] (__dabt_usr+0x40/0x60)
[  163.955893] 000: Exception stack(0xc3ecffb0 to 0xc3ecfff8)
[  163.955900] 000: ffa0:                                     00000000 00000000 00000000 b6f24058
[  163.955908] 000: ffc0: 00000000 00000000 00000001 befd10c8 00000000 b6e44000 b6f22320 000b8100
[  163.955915] 000: ffe0: 00000078 befd10c8 b6dcabcd b6dcac0a 20010030 ffffffff

默

问题：
T113-S3 打了 PREEMPT-RT补丁后，在板子上执行 iperf3 -s 压测wifi带宽，几秒钟就会卡死，且不输出任何信息。
环境：
1、board.dts、sun8iw20p1.dtsi.dtsi 均拷贝自配套源码。
2、芯片T113-S3
3、SD卡启动
4、来自 T113-i 的linux，内核版本 5.4.61 + PREEMPT-RT 补丁

当前已尝试排查的方向：
方向一、不打 PREEMPT-RT补丁，压测内核版本 5.4.61（原先怀疑供电问题，此为了排除电源影响）
压测5小时，全程稳定正常结束。可断定供电无问题。

方向二、RT_RUNTIME_SHARE=false，sched_rt_runtime_us=950000，避免CPU耗尽。问题依然存在。

vim kernel/linux-5.4/kernel/sched/features.h
SCHED_FEAT(RT_RUNTIME_SHARE, true) 
改为 
SCHED_FEAT(RT_RUNTIME_SHARE, false)

sysctl -w kernel.sched_rt_runtime_us=950000

方向三、打开内核 Debug Lockups and Hangs，卡死时等待几分钟仍然无任何信息输出

附：
1、内核配置文件

# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
#CONFIG_PREEMPT=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_MACH_SUN4I is not set
# CONFIG_MACH_SUN5I is not set
# CONFIG_MACH_SUN6I is not set
# CONFIG_MACH_SUN7I is not set
# CONFIG_MACH_SUN8I is not set
# CONFIG_MACH_SUN9I is not set
CONFIG_ARCH_SUN8IW20=y
CONFIG_EVB_PLATFORM=y
CONFIG_SUNXI_SOC_NAME="sun8iw20"
# CONFIG_VDSO is not set
CONFIG_SMP=y
CONFIG_SCHED_MC=y
CONFIG_ARM_PSCI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARM_MODULE_PLTS is not set
# CONFIG_ATAGS is not set
CONFIG_CMDLINE="loglevel=8 initcall_debug=1 console=ttyS0 init=/init"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_TIMES=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_CPUFREQ_DT=y
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_COREDUMP is not set
# CONFIG_COMPACTION is not set
CONFIG_CMA=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_UDP_DIAG=y
CONFIG_IPV6_TUNNEL=y
CONFIG_NETLINK_DIAG=y
CONFIG_CAN=y
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_SUNXI_MBUS=y
CONFIG_MTD=y
CONFIG_AW_MTD_SPINAND=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_SUNXI_GMAC=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_SENSORINIT is not set
CONFIG_KEYBOARD_SUNXI=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_SUNXI=y
# CONFIG_TOUCHSCREEN_GSLX680NEW is not set
CONFIG_INPUT_SENSOR=y
CONFIG_SUNXI_GPADC=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVMEM is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SUNXI_SMC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_SUNXI=y
CONFIG_SPI=y
CONFIG_SPI_SUNXI=y
CONFIG_SPI_SPIDEV=y
CONFIG_POWER_SUPPLY=y
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_SUNXI_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_SUNXI_REGULATOR_PWM=y
CONFIG_RC_CORE=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_IR_RX_SUNXI=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_DISP2_SUNXI=y
CONFIG_HDMI2_DISP2_SUNXI=y
CONFIG_HDMI2_HDCP_SUNXI=y
CONFIG_DISP2_SUNXI_DEBUG=y

#CONFIG_USB=y
#CONFIG_USB_EHCI_HCD=y
#CONFIG_USB_EHCI_HCD_SUNXI=y
#CONFIG_USB_OHCI_HCD=y
#CONFIG_USB_OHCI_HCD_SUNXI=y
#CONFIG_USB_SUNXI_HCD=y
#CONFIG_USB_SUNXI_HCI=y
#CONFIG_USB_SUNXI_EHCI0=y
#CONFIG_USB_SUNXI_EHCI1=y
#CONFIG_USB_SUNXI_OHCI0=y
#CONFIG_USB_SUNXI_OHCI1=y
#CONFIG_USB_STORAGE=y
#CONFIG_USB_STORAGE_REALTEK=y
#CONFIG_USB_STORAGE_DATAFAB=y
#CONFIG_USB_STORAGE_FREECOM=y
#CONFIG_USB_STORAGE_ISD200=y
#CONFIG_USB_STORAGE_USBAT=y
#CONFIG_USB_STORAGE_SDDR09=y
#CONFIG_USB_STORAGE_SDDR55=y
#CONFIG_USB_STORAGE_JUMPSHOT=y
#CONFIG_USB_STORAGE_ALAUDA=y
#CONFIG_USB_STORAGE_ONETOUCH=y
#CONFIG_USB_STORAGE_KARMA=y
#CONFIG_USB_STORAGE_CYPRESS_ATACB=y
#CONFIG_USB_STORAGE_ENE_UB6250=y
#CONFIG_USB_UAS=y
#CONFIG_USB_GADGET=y
#CONFIG_USB_SUNXI_UDC0=y
#CONFIG_USB_CONFIGFS=y
#CONFIG_USB_CONFIGFS_UEVENT=y
#CONFIG_USB_CONFIGFS_SERIAL=y
#CONFIG_USB_CONFIGFS_RNDIS=y
#CONFIG_USB_CONFIGFS_MASS_STORAGE=y
#CONFIG_USB_CONFIGFS_F_FS=y
#CONFIG_USB_CONFIGFS_F_HID=y
#CONFIG_USB_SUNXI_USB=y
#CONFIG_USB_SUNXI_USB_MANAGER=y
#CONFIG_USB_SUNXI_USB_DEBUG=y
#CONFIG_USB_SUNXI_USB_ADB=y
#CONFIG_USB_ROLE_SWITCH=y

CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SUNXI=y
CONFIG_DMADEVICES=y
CONFIG_DMA_SUN6I=y
CONFIG_STAGING=y
CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_CLK_SUNXI_CLOCKS is not set
# CONFIG_CLK_SUNXI_DDR is not set
# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
CONFIG_SUNXI_MAILBOX=y
CONFIG_SUNXI_IOMMU=y
CONFIG_SUNXI_IOMMU_DEBUG=y
CONFIG_SUNXI_IOMMU_TESTS=y
CONFIG_REMOTEPROC=y
CONFIG_SUNXI_REMOTEPROC=y
CONFIG_SUNXI_REMOTEPROC_SRM_CORE=y
CONFIG_SUNXI_REMOTEPROC_SRM_DEV=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_SUNXI_CLIENT_SAMPLE=y
CONFIG_SUNXI_PM_DOMAINS=y
CONFIG_SUNXI_SID=y
CONFIG_PWM=y
CONFIG_PWM_SUNXI_GROUP=y
CONFIG_DSP_DEBUG=y
CONFIG_DSP_LOG_DEBUG=y
CONFIG_ANDROID=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_FILE_LOCKING=y

CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y

CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_UBIFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_DEV_SUNXI=m
CONFIG_DMA_CMA=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_FRAME_WARN=2048
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_MISC is not set
CONFIG_DEBUG_VM=y
CONFIG_SCHED_DEBUG=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_UART_PHYS=0x02500000
CONFIG_DEBUG_UART_VIRT=0xf2500000
CONFIG_EARLY_PRINTK=y

CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y

CONFIG_MMC=y
CONFIG_MMC_SUNXI=y
# 此位置以上可编译启动

#CONFIG_MMC_SUNXI_V4P1X=y
#CONFIG_MMC_SUNXI_V4P00X=y
#CONFIG_MMC_SUNXI_V4P10X=y
#CONFIG_MMC_SUNXI_V4P5X=y
#CONFIG_MMC_SUNXI_V5P3X=y


CONFIG_NET=y
# CONFIG_NETCONSOLE is not set
CONFIG_NETDEVICES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WLAN=y
CONFIG_RTL8189FS=y

CONFIG_CFG80211=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_DEFAULT_PS=y

CONFIG_RFKILL=y
CONFIG_SUNXI_RFKILL=y

# for RT
CONFIG_NO_HZ=y
CONFIG_NO_HZ_FULL=y

CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y

CONFIG_HIGH_RES_TIMERS=y
#CONFIG_CONTEXT_TRACKING=y

CONFIG_PREEMPT_RCU=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y

CONFIG_GPIO_SYSFS=y

CONFIG_USB_SUPPORT=n


CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y

内核 .config文件

#
# Automatically generated file; DO NOT EDIT.
# Linux/arm 5.4.61 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=50301
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_HAVE_PREEMPT_LAZY=y
CONFIG_PREEMPT_LAZY=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features

# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_ARM=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_DMA_USE_IOMMU=y
CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_GENERIC_BUG=y
CONFIG_PGTABLE_LEVELS=2

#
# System Type
#
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MULTIPLATFORM=y
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C24XX is not set
# CONFIG_ARCH_OMAP1 is not set

#
# Multiple platform selection
#

#
# CPU Core family selection
#
# CONFIG_ARCH_MULTI_V6 is not set
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_MULTI_V6_V7=y
# end of Multiple platform selection

# CONFIG_ARCH_VIRT is not set
# CONFIG_ARCH_ACTIONS is not set
# CONFIG_ARCH_ALPINE is not set
# CONFIG_ARCH_ARTPEC is not set
# CONFIG_ARCH_ASPEED is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM is not set
# CONFIG_ARCH_BERLIN is not set
# CONFIG_ARCH_DIGICOLOR is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_HISI is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_MEDIATEK is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MILBEAUT is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_NPCM is not set

#
# TI OMAP/AM/DM/DRA Family
#
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
# CONFIG_SOC_AM43XX is not set
# CONFIG_SOC_DRA7XX is not set
# end of TI OMAP/AM/DM/DRA Family

# CONFIG_ARCH_SIRF is not set
# CONFIG_ARCH_QCOM is not set
# CONFIG_ARCH_RDA is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_RENESAS is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_PLAT_SPEAR is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_STM32 is not set
CONFIG_ARCH_SUNXI=y
# CONFIG_MACH_SUN4I is not set
# CONFIG_MACH_SUN5I is not set
# CONFIG_MACH_SUN6I is not set
# CONFIG_MACH_SUN7I is not set
# CONFIG_MACH_SUN8I is not set
# CONFIG_MACH_SUN9I is not set
CONFIG_ARCH_SUN8I=y
# CONFIG_ARCH_SUN8IW15 is not set
CONFIG_ARCH_SUN8IW20=y
# CONFIG_FPGA_V4_PLATFORM is not set
# CONFIG_FPGA_V7_PLATFORM is not set
CONFIG_EVB_PLATFORM=y
CONFIG_SUNXI_SOC_NAME="sun8iw20"
# CONFIG_ARCH_TANGO is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_WM8850 is not set
# CONFIG_ARCH_ZX is not set
# CONFIG_ARCH_ZYNQ is not set

#
# Processor Type
#
CONFIG_CPU_V7=y
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y

#
# Processor Features
#
# CONFIG_ARM_LPAE is not set
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
CONFIG_ARM_VIRT_EXT=y
CONFIG_SWP_EMULATE=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_SPECTRE=y
CONFIG_HARDEN_BRANCH_PREDICTOR=y
CONFIG_KUSER_HELPERS=y
# CONFIG_VDSO is not set
CONFIG_OUTER_CACHE=y
CONFIG_OUTER_CACHE_SYNC=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_CACHE_L2X0=y
# CONFIG_PL310_ERRATA_588369 is not set
# CONFIG_PL310_ERRATA_727915 is not set
# CONFIG_PL310_ERRATA_753970 is not set
# CONFIG_PL310_ERRATA_769419 is not set
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_DMA_MEM_BUFFERABLE=y
CONFIG_ARM_HEAVY_MB=y
CONFIG_DEBUG_ALIGN_RODATA=y
# CONFIG_ARM_ERRATA_430973 is not set
CONFIG_ARM_ERRATA_643719=y
# CONFIG_ARM_ERRATA_720789 is not set
# CONFIG_ARM_ERRATA_754322 is not set
# CONFIG_ARM_ERRATA_754327 is not set
# CONFIG_ARM_ERRATA_764369 is not set
# CONFIG_ARM_ERRATA_775420 is not set
# CONFIG_ARM_ERRATA_798181 is not set
# CONFIG_ARM_ERRATA_773022 is not set
# CONFIG_ARM_ERRATA_818325_852422 is not set
# CONFIG_ARM_ERRATA_821420 is not set
# CONFIG_ARM_ERRATA_825619 is not set
# CONFIG_ARM_ERRATA_857271 is not set
# CONFIG_ARM_ERRATA_852421 is not set
# CONFIG_ARM_ERRATA_852423 is not set
# CONFIG_ARM_ERRATA_857272 is not set
# end of System Type

#
# Bus support
#
# CONFIG_ARM_ERRATA_814220 is not set
# end of Bus support

#
# Kernel Features
#
CONFIG_HAVE_SMP=y
CONFIG_SMP=y
CONFIG_SMP_ON_UP=y
CONFIG_ARM_CPU_TOPOLOGY=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_SMT is not set
CONFIG_HAVE_ARM_ARCH_TIMER=y
# CONFIG_MCPM is not set
# CONFIG_BIG_LITTLE is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_NR_CPUS=4
CONFIG_HOTPLUG_CPU=y
CONFIG_ARM_PSCI=y
CONFIG_ARCH_NR_GPIO=416
CONFIG_HZ_FIXED=0
CONFIG_HZ_100=y
# CONFIG_HZ_200 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_500 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_ARM_PATCH_IDIV=y
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_HAVE_ARCH_PFN_VALID=y
# CONFIG_HIGHMEM is not set
CONFIG_CPU_SW_DOMAIN_PAN=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ARM_MODULE_PLTS is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_SECCOMP is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
# CONFIG_XEN is not set
CONFIG_STACKPROTECTOR_PER_TASK=y
# end of Kernel Features

#
# Boot options
#
CONFIG_USE_OF=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
# CONFIG_ARM_APPENDED_DTB is not set
CONFIG_CMDLINE="loglevel=8 initcall_debug=1 console=ttyS0 init=/init"
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_AUTO_ZRELADDR=y
# CONFIG_EFI is not set
# end of Boot options

#
# CPU Power Management
#

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
# CONFIG_CPUFREQ_DUMMY is not set
CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=y
# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
# CONFIG_QORIQ_CPUFREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPU Power Management

#
# Floating point emulation
#

#
# At least one emulation must be selected
#
# CONFIG_FPE_NWFPE is not set
# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
# CONFIG_KERNEL_MODE_NEON is not set
# end of Floating point emulation

#
# Power management options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_APM_EMULATION is not set
CONFIG_PM_CLK=y
CONFIG_PM_GENERIC_DOMAINS=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_CPU_PM=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARM_CPU_SUSPEND=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# end of Power management options

#
# Firmware Drivers
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_ARM_SCPI_PROTOCOL is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_QCOM_SCM is not set
# CONFIG_TRUSTED_FOUNDATIONS is not set
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_ARM_PSCI_FW=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_ARM_CRYPTO is not set
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_KEEPINITRD=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_SUPPORTS_RT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_REFCOUNT_FULL=y
# CONFIG_LOCK_EVENT_COUNTS is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
# CONFIG_GKI_HIDDEN_DRM_CONFIGS is not set
# CONFIG_GKI_HIDDEN_REGMAP_CONFIGS is not set
# CONFIG_GKI_HIDDEN_CRYPTO_CONFIGS is not set
# CONFIG_GKI_HIDDEN_SND_CONFIGS is not set
# CONFIG_GKI_HIDDEN_SND_SOC_CONFIGS is not set
# CONFIG_GKI_HIDDEN_MMC_CONFIGS is not set
# CONFIG_GKI_HIDDEN_GPIO_CONFIGS is not set
# CONFIG_GKI_HIDDEN_QCOM_CONFIGS is not set
# CONFIG_GKI_HIDDEN_MEDIA_CONFIGS is not set
# CONFIG_GKI_HIDDEN_VIRTUAL_CONFIGS is not set
# CONFIG_GKI_LEGACY_WEXT_ALLCONFIG is not set
# CONFIG_GKI_HIDDEN_USB_CONFIGS is not set
# CONFIG_GKI_HIDDEN_SOC_BUS_CONFIGS is not set
# CONFIG_GKI_HIDDEN_RPMSG_CONFIGS is not set
# CONFIG_GKI_HIDDEN_GPU_CONFIGS is not set
# CONFIG_GKI_HIDDEN_IRQ_CONFIGS is not set
# CONFIG_GKI_HIDDEN_HYPERVISOR_CONFIGS is not set
# CONFIG_GKI_HACKS_TO_FIX is not set
# CONFIG_GKI_OPT_FEATURES is not set
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_ELF_FDPIC is not set
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_ARCH_HAS_BINFMT_FLAT=y
# CONFIG_BINFMT_FLAT is not set
CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# end of Executable file formats

#
# Memory Management options
#
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# end of Memory Management options

CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_TUNNEL=y
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=y
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y
# CONFIG_CAN_J1939 is not set

#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_VXCAN is not set
# CONFIG_CAN_SLCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_FLEXCAN is not set
# CONFIG_CAN_GRCAN is not set
# CONFIG_CAN_SUN8I is not set
# CONFIG_CAN_TI_HECC is not set
# CONFIG_CAN_C_CAN is not set
# CONFIG_CAN_CC770 is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_SOFTING is not set

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR=""
# CONFIG_CFG80211_REG_CELLULAR_HINTS is not set
# CONFIG_CFG80211_REG_RELAX_NO_IR is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
# CONFIG_MAC80211 is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_GENERIC_ARCH_TOPOLOGY=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_BRCMSTB_GISB_ARB is not set
# CONFIG_MOXTET is not set
# CONFIG_SIMPLE_PM_BUS is not set
# CONFIG_SUN50I_DE2_BUS is not set
# CONFIG_SUNXI_RSB is not set
CONFIG_SUNXI_MBUS=y
# CONFIG_SUNXI_NSI is not set
# CONFIG_VEXPRESS_CONFIG is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_SUNXI_PARTS is not set

#
# Partition parsers
#
# end of Partition parsers

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set

#
# sunxi-nand
#
CONFIG_AW_MTD_SPINAND=y
# CONFIG_AW_MTD_RAWNAND is not set
CONFIG_AW_SPINAND_PHYSICAL_LAYER=y
CONFIG_AW_SPINAND_SECURE_STORAGE=y
# CONFIG_AW_SPINAND_PSTORE_MTD_PART is not set
# CONFIG_AW_SPINAND_ENABLE_PHY_CRC16 is not set
CONFIG_AW_SPINAND_SIMULATE_MULTIPLANE=y
# end of sunxi-nand

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_LPDDR2_NVM is not set
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=40
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_NET=y
CONFIG_OF_MDIO=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_SUNXI_NAND is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_RBD is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_PVPANIC is not set
# CONFIG_HISI_HIKEY_USB is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# end of Intel MIC & related support

# CONFIG_ECHO is not set
CONFIG_SUNXI_RFKILL=y
# CONFIG_SUNXI_ADDR_MGT is not set
# CONFIG_SUNXI_BOOTEVENT is not set

#
# sunxi Gorilla ESL platform
#
# CONFIG_SUNXI_GORILLA is not set
# end of sunxi Gorilla ESL platform

# CONFIG_SUNXI_MIPSLOADER is not set
# CONFIG_SUNXI_TVUTILS is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_NET_VENDOR_ALLWINNER=y
# CONFIG_SUN4I_EMAC is not set
CONFIG_SUNXI_GMAC=y
CONFIG_SUNXI_EXT_PHY=y
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0 is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
# CONFIG_HISI_FEMAC is not set
# CONFIG_HIP04_ETH is not set
# CONFIG_HNS is not set
# CONFIG_HNS_DSAF is not set
# CONFIG_HNS_ENET is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_SPI is not set
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMC91X is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_SUN4I is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y

#
# MII PHY device drivers
#
# CONFIG_ADIN_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_ICPLUS_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_RTL8363_NB is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS is not set
# CONFIG_ATH6KL is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_MWIFIEX is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_XR829_WLAN is not set
# CONFIG_XR819S_WLAN is not set
# CONFIG_RTL8821CS is not set
# CONFIG_RTL8723DS is not set
CONFIG_RTL8189FS=y
# CONFIG_SPARD_WLAN_SUPPORT is not set
# CONFIG_BCMDHD is not set
# CONFIG_AIC_WLAN_SUPPORT is not set
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_SENSORINIT is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SUN4I_LRADC is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CAP11XX is not set
# CONFIG_KEYBOARD_BCM is not set
CONFIG_KEYBOARD_SUNXI=y
# CONFIG_KEYBOARD_TPKEY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
CONFIG_TOUCHSCREEN_SUNXI=y
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_GSLX680NEW is not set
# CONFIG_TOUCHSCREEN_GT9XXNEW_TS is not set
# CONFIG_TOUCHSCREEN_GT9XXNEWDUP_TS is not set
# CONFIG_TOUCHSCREEN_FTS is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
CONFIG_INPUT_SENSOR=y
# CONFIG_SENSORS_SC7A20 is not set
# CONFIG_SENSORS_MIR3DA is not set
# CONFIG_STK3X1X is not set
# CONFIG_SUNXI_TPADC is not set
CONFIG_SUNXI_GPADC=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_SPRD is not set
CONFIG_SERIAL_SUNXI=y
# CONFIG_SERIAL_SUNXI_DMA is not set
CONFIG_SERIAL_SUNXI_CONSOLE=y
# CONFIG_SERIAL_SUNXI_EARLYCON is not set
# end of Serial drivers

# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_HVC_DCC is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_SUNXI_BS83B16C is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
CONFIG_DUMP_REG=y
CONFIG_DUMP_REG_MISC=y
# CONFIG_SUNXI_G2D is not set
# CONFIG_SUNXI_DI is not set
CONFIG_SUNXI_STANDBY_DEBUG=y
# CONFIG_SUNXI_SYS_INFO is not set
CONFIG_SUNXI_SMC=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y

#
# I2C Hardware Bus support
#

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SUNXI=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_RK3X is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set

#
# Other I2C/SMBus bus drivers
#
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_FSL_SPI is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_SUN4I is not set
# CONFIG_SPI_SUN6I is not set
# CONFIG_SPI_MXIC is not set
CONFIG_SPI_SUNXI=y
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_STMFX is not set
# CONFIG_PINCTRL_OCELOT is not set

#
# Allwinner SOC PINCTRL DRIVER
#
CONFIG_PINCTRL_SUNXI=y
# CONFIG_PINCTRL_SUNXI_DEBUGFS is not set
# CONFIG_PINCTRL_SUNXI_TEST is not set
# CONFIG_PINCTRL_SUN8IW15P1 is not set
# CONFIG_PINCTRL_SUN8IW15P1_R is not set
CONFIG_PINCTRL_SUN8IW20=y
# CONFIG_PINCTRL_SUN50IW9 is not set
# CONFIG_PINCTRL_SUN50IW9_R is not set
# CONFIG_PINCTRL_SUN50IW10P1 is not set
# CONFIG_PINCTRL_SUN50IW10P1_R is not set
# CONFIG_PINCTRL_SUN50IW12 is not set
# CONFIG_PINCTRL_SUN50IW12_R is not set
# CONFIG_PINCTRL_SUN4I_A10 is not set
# CONFIG_PINCTRL_SUN5I is not set
# CONFIG_PINCTRL_SUN6I_A31 is not set
# CONFIG_PINCTRL_SUN6I_A31_R is not set
# CONFIG_PINCTRL_SUN8I_A23 is not set
# CONFIG_PINCTRL_SUN8I_A33 is not set
# CONFIG_PINCTRL_SUN8I_A83T is not set
# CONFIG_PINCTRL_SUN8I_A83T_R is not set
# CONFIG_PINCTRL_SUN8I_A23_R is not set
# CONFIG_PINCTRL_SUN8I_H3 is not set
# CONFIG_PINCTRL_SUN8I_H3_R is not set
# CONFIG_PINCTRL_SUN8I_V3S is not set
# CONFIG_PINCTRL_SUN9I_A80 is not set
# CONFIG_PINCTRL_SUN9I_A80_R is not set
# CONFIG_PINCTRL_SUN50I_A64 is not set
# CONFIG_PINCTRL_SUN50I_A64_R is not set
# CONFIG_PINCTRL_SUN50I_A100 is not set
# CONFIG_PINCTRL_SUN50I_A100_R is not set
# CONFIG_PINCTRL_SUN50I_H5 is not set
# CONFIG_PINCTRL_SUN50I_H6 is not set
# CONFIG_PINCTRL_SUN50I_H6_R is not set
# end of Allwinner SOC PINCTRL DRIVER

CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
# CONFIG_GPIO_SUNXI is not set
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_FTGPIO010 is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HLWD is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SYSCON is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_ZEVIO is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_ADNP is not set
# CONFIG_GPIO_BS83B16C is not set
# CONFIG_GPIO_GW_PLD is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_HTC_EGPIO is not set
# end of MFD GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_74X164 is not set
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

# CONFIG_GPIO_MOCKUP is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_UCS1002 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
# CONFIG_CLOCK_THERMAL is not set
CONFIG_THERMAL_EMULATION=y
# CONFIG_THERMAL_MMIO is not set
# CONFIG_QORIQ_THERMAL is not set
CONFIG_SUNXI_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_GPIO_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
CONFIG_SUNXI_WATCHDOG=y
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP2101_I2C is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_CPCAP is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SUN6I_PRCM=y
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD70528 is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_SUNXI_REGULATOR_PWM=y
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
# CONFIG_REGULATOR_MCP16502 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PFUZE100 is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_SY8106A is not set
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
# CONFIG_IR_RC6_DECODER is not set
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
# CONFIG_IR_SHARP_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_HIX5HD2 is not set
# CONFIG_RC_LOOPBACK is not set
# CONFIG_IR_GPIO_CIR is not set
# CONFIG_IR_SUNXI is not set
CONFIG_IR_RX_SUNXI=y
# CONFIG_IR_TX_SUNXI is not set
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set

#
# Media drivers
#

#
# Supported MMC/SDIO adapters
#
CONFIG_VIDEOBUF2_CORE=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#

#
# Media SPI Adapters
#
# end of Media SPI Adapters

#
# Customise DVB Frontends
#

#
# Tools to develop new frontends
#
# end of Customise DVB Frontends

CONFIG_VIDEO_ENCODER_DECODER_SUNXI=y
# CONFIG_VIDEO_GOOGLE_DECODER_SUNXI is not set

#
# Graphics support
#

#
# GPU support for sunxi
#
CONFIG_SUNXI_GPU_TYPE="None"
# end of GPU support for sunxi

# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DP_CEC is not set

#
# ARM devices
#
# end of ARM devices

#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set

#
# Video support for sunxi
#
# CONFIG_FB_CONSOLE_SUNXI is not set
CONFIG_DISP2_SUNXI=y
CONFIG_SUNXI_DISP2_FB_DISABLE_ROTATE=y
# CONFIG_SUNXI_DISP2_FB_ROTATION_SUPPORT is not set
# CONFIG_SUNXI_DISP2_FB_DECOMPRESS_LZMA is not set
# CONFIG_HDMI_DISP2_SUNXI is not set
CONFIG_HDMI2_DISP2_SUNXI=y
CONFIG_AW_PHY=y
# CONFIG_DEFAULT_PHY is not set
# CONFIG_HDMI_EP952_DISP2_SUNXI is not set
CONFIG_HDMI2_HDCP_SUNXI=y
# CONFIG_HDMI2_HDCP22_SUNXI is not set
# CONFIG_HDMI2_CEC_SUNXI is not set
# CONFIG_HDMI2_FREQ_SPREAD_SPECTRUM is not set
# CONFIG_TV_DISP2_SUNXI is not set
# CONFIG_VDPO_DISP2_SUNXI is not set
# CONFIG_EDP_DISP2_SUNXI is not set
# CONFIG_DISP2_SUNXI_BOOT_COLORBAR is not set
CONFIG_DISP2_SUNXI_DEBUG=y
# CONFIG_DISP2_SUNXI_COMPOSER is not set
# CONFIG_DISP2_LCD_ESD_DETECT is not set
# CONFIG_LCD_FB is not set
# CONFIG_LCD_FB_ENABLE_DEFERRED_IO is not set

#
# LCD panels select
#
# CONFIG_LCD_SUPPORT_GG1P4062UTSW is not set
# CONFIG_LCD_SUPPORT_DX0960BE40A1 is not set
# CONFIG_LCD_SUPPORT_TFT720X1280 is not set
# CONFIG_LCD_SUPPORT_FD055HD003S is not set
CONFIG_LCD_SUPPORT_LT8912B=y
CONFIG_LCD_SUPPORT_AML070WXII4006=y
CONFIG_LCD_SUPPORT_HE0801A068=y
# CONFIG_LCD_SUPPORT_ILI9341 is not set
# CONFIG_LCD_SUPPORT_LH219WQ1 is not set
# CONFIG_LCD_SUPPORT_LS029B3SX02 is not set
# CONFIG_LCD_SUPPORT_LT070ME05000 is not set
# CONFIG_LCD_SUPPORT_S6D7AA0X01 is not set
# CONFIG_LCD_SUPPORT_T27P06 is not set
# CONFIG_LCD_SUPPORT_TFT720x1280 is not set
# CONFIG_LCD_SUPPORT_WTQ05027D01 is not set
# CONFIG_LCD_SUPPORT_H245QBN02 is not set
# CONFIG_LCD_SUPPORT_ST7789V is not set
# CONFIG_LCD_SUPPORT_ST7796S is not set
# CONFIG_LCD_SUPPORT_ST7701S is not set
# CONFIG_LCD_SUPPORT_T30P106 is not set
# CONFIG_LCD_SUPPORT_TO20T20000 is not set
# CONFIG_LCD_SUPPORT_FRD450H40014 is not set
# CONFIG_LCD_SUPPORT_S2003T46G is not set
CONFIG_LCD_SUPPORT_WILLIAMLCD=y
CONFIG_LCD_SUPPORT_LQ101R1SX03=y
CONFIG_LCD_SUPPORT_INET_DSI_PANEL=y
# CONFIG_LCD_SUPPORT_WTL096601G03 is not set
# CONFIG_LCD_SUPPORT_RT13QV005D is not set
# CONFIG_LCD_SUPPORT_ST7789V_CPU is not set
CONFIG_LCD_SUPPORT_CC08021801_310_800X1280=y
# CONFIG_LCD_SUPPORT_JD9366AB_3 is not set
# CONFIG_LCD_SUPPORT_TFT08006 is not set
CONFIG_LCD_SUPPORT_BP101WX1_206=y
CONFIG_LCD_SUPPORT_FX070=y
CONFIG_LCD_SUPPORT_K101IM2QA04=y
CONFIG_LCD_SUPPORT_K101_IM2BYL02_L_800X1280=y
CONFIG_LCD_SUPPORT_K080_IM2HYL802R_800X1280=y
CONFIG_LCD_SUPPORT_KD080D24=y
# end of LCD panels select

#
# Display engine feature select
#
CONFIG_DISP2_SUNXI_SUPPORT_SMBL=y
CONFIG_DISP2_SUNXI_SUPPORT_ENAHNCE=y
CONFIG_DISP2_SUNXI_DEVICE_OFF_ON_RELEASE=y
# end of Display engine feature select
# end of Video support for sunxi
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
# end of I2C HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_SUNXI=y
CONFIG_MMC_SUNXI_V4P1X=y
CONFIG_MMC_SUNXI_V4P00X=y
CONFIG_MMC_SUNXI_V4P10X=y
CONFIG_MMC_SUNXI_V4P5X=y
CONFIG_MMC_SUNXI_V5P3X=y
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SUN6I is not set
CONFIG_RTC_DRV_SUNXI=y
# CONFIG_SUNXI_REBOOT_FLAG is not set
# CONFIG_SUNXI_RTC_BOOTCOUNT is not set
# CONFIG_SUNXI_RTC_POWEROFF_ALARM is not set
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_SNVS is not set
# CONFIG_RTC_DRV_R7301 is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_DMA_SUN6I=y
# CONFIG_DW_AXI_DMAC is not set
# CONFIG_FSL_EDMA is not set
# CONFIG_FSL_QDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_SELFTESTS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
CONFIG_STAGING=y
# CONFIG_COMEDI is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTL8723BS is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# end of Speakup console speech

# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ASHMEM is not set
CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
CONFIG_ION_CMA_HEAP=y
# end of Android

# CONFIG_STAGING_BOARD is not set
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_KS7010 is not set
# CONFIG_PI433 is not set

#
# Gasket devices
#
# end of Gasket devices

# CONFIG_XIL_AXIS_FIFO is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_UWB is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_GOLDFISH is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_DEBUG is not set
# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI514 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_SI570 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_COMMON_CLK_VC5 is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
CONFIG_CLK_SUNXI=y
# CONFIG_CLK_SUNXI_CLOCKS is not set
# CONFIG_CLK_SUNXI_DDR is not set
# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
CONFIG_SUNXI_CCU=y
CONFIG_SUN8IW20_CCU=y
CONFIG_SUN8IW20_R_CCU=y
# CONFIG_SUN8I_A83T_CCU is not set
# CONFIG_SUN8I_DE2_CCU is not set
# CONFIG_SUN8I_R_CCU is not set
CONFIG_SUNXI_RTC_CCU=y
# end of Common Clock Framework

# CONFIG_HWSPINLOCK is not set
# CONFIG_HWSPINLOCK_SUNXI is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_SUN4I_TIMER=y
# CONFIG_SUN50I_TIMER is not set
# CONFIG_SUNXI_TIMER is not set
# CONFIG_SUNXI_TIMER_TEST is not set
CONFIG_ARM_ARCH_TIMER=y
# CONFIG_ARM_ARCH_TIMER_EVTSTREAM is not set
# CONFIG_MTK_TIMER is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_PLATFORM_MHU is not set
# CONFIG_ALTERA_MBOX is not set
# CONFIG_MAILBOX_TEST is not set
CONFIG_SUNXI_MAILBOX=y
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_LIMIT_IOVA_ALIGNMENT is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
# CONFIG_ARM_SMMU is not set
CONFIG_SUNXI_IOMMU=y
CONFIG_SUNXI_IOMMU_DEBUG=y
CONFIG_SUNXI_IOMMU_TESTS=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_SUNXI_REMOTEPROC=y
CONFIG_SUNXI_REMOTEPROC_SRM_CORE=y
CONFIG_SUNXI_REMOTEPROC_SRM_DEV=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
CONFIG_RPMSG_CHAR=y
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_SUNXI_AMP is not set
# CONFIG_RPMSG_DSP_STANDBY is not set
CONFIG_RPMSG_VIRTIO=y
# CONFIG_RPMSG_SUNXI_TTY is not set
CONFIG_RPMSG_SUNXI_CLIENT_SAMPLE=y
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SUNXI_SRAM=y
CONFIG_SUNXI_PM_DOMAINS=y
CONFIG_SUNXI_SID=y
# CONFIG_SUNXI_RISCV_SUSPEND is not set
# CONFIG_PM_TRACE_NVMEM is not set
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_FSL_FTM is not set
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_SUN4I is not set
CONFIG_PWM_SUNXI_GROUP=y
CONFIG_DSP_DEBUG=y
CONFIG_DSP_LOG_DEBUG=y

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_AL_FIC is not set
# CONFIG_SUNXI_WAKEUPGEN is not set
# CONFIG_SUN8I_NMI is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_SIMPLE=y
CONFIG_RESET_SUNXI=y
# CONFIG_RESET_TI_SYSCON is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_CADENCE_DP is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_OCELOT_SERDES is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SUNXI_SID=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_TEE is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set
# CONFIG_INCREMENTAL_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
# end of DOS/FAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECRDSA is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_XXHASH is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set

#
# Support for Allwinner Sunxi CryptoEngine
#

#
# Choose one according to the actual usage
#
CONFIG_CRYPTO_DEV_SUNXI=m
# CONFIG_CRYPTO_DEV_SUNXI_IOCTL is not set
# end of Support for Allwinner Sunxi CryptoEngine

CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SETUP_DMA_OPS=y
CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y
CONFIG_DMA_REMAP=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=16
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_SG_POOL=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_CONSOLE_LOGLEVEL_EMERGENCY=5
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VM_PGFLAGS is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
# end of Memory Debugging

CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# end of Debug Lockups and Hangs

# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_ARM_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_WX is not set
# CONFIG_UNWINDER_FRAME_POINTER is not set
CONFIG_UNWINDER_ARM=y
CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_SUNXI_UART0=y
# CONFIG_DEBUG_SUNXI_UART1 is not set
# CONFIG_DEBUG_SUNXI_UART2 is not set
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_DEBUG_SEMIHOSTING is not set
# CONFIG_DEBUG_LL_UART_8250 is not set
# CONFIG_DEBUG_LL_UART_PL01X is not set
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0x02500000
CONFIG_DEBUG_UART_VIRT=0xf2500000
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
# CONFIG_DEBUG_UNCOMPRESS is not set
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_EARLY_PRINTK=y
# CONFIG_PID_IN_CONTEXTIDR is not set
# CONFIG_SUNXI_DUMP is not set
# CONFIG_CORESIGHT is not set
# end of Kernel hacking

启动日志

[20]HELLO! BOOT0 is starting!
[22]BOOT0 commit : adaf1174cc
[25]set pll start
[31]periph0 has been enabled
[34]set pll end
[36][pmu]: bus read error
[38]board init ok
[40]ZQ value = 0x2f
[42]get_pmu_exist() = -1
[45]ddr_efuse_type: 0xa
[47]trefi:7.8ms
[50][AUTO DEBUG] single rank and full DQ!
[54]ddr_efuse_type: 0xa
[56]trefi:7.8ms
[58][AUTO DEBUG] rank 0 row = 13
[62][AUTO DEBUG] rank 0 bank = 8
[65][AUTO DEBUG] rank 0 page size = 2 KB
[69]DRAM BOOT DRIVE INFO: V0.33
[72]DRAM CLK = 936 MHz
[74]DRAM Type = 3 (2:DDR2,3:DDR3)
[78]DRAMC read ODT  off.
[80]DRAM ODT value: 0x42.
[83]ddr_efuse_type: 0xa
[86]DRAM SIZE =128 M
[88]dram_tpr4:0x0
[90]PLL_DDR_CTRL_REG:0xf8004d00
[93]DRAM_CLK_REG:0xc0000000
[95][TIMING DEBUG] MR2= 0x20
[103]DRAM simple test OK.
[105]rtc standby flag is 0x0, super standby flag is 0x0
[111]dram size =128
[114]card no is 0
[115]sdcard 0 line count 4
[118][mmc]: mmc driver ver 2021-05-21 14:47
[127][mmc]: Wrong media type 0x0
[130][mmc]: ***Try SD card 0***
[139][mmc]: HSSDR52/SDR25 4 bit
[141][mmc]: 50000000 Hz
[144][mmc]: 59638 MB
[146][mmc]: ***SD/MMC 0 init OK!!!***
[244]Loading boot-pkg Succeed(index=0).
[247]Entry_name        = u-boot
[254]Entry_name        = optee
[258]Entry_name        = dtb
[261]mmc not para
[263]Jump to second Boot.
M/TC: OP-TEE version: e9372c9c-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #2 Sat Mar 19 11:09:45 UTC 2022 arm


U-Boot 2018.05 (Nov 13 2023 - 00:18:28 +0800) Allwinner Technology

[00.316]CPU:   Allwinner Family
[00.318]Model: sun8iw20
[00.321]DRAM:  128 MiB
[00.324]Relocation Offset is: 04eba000
[00.350]secure enable bit: 0
E/TC:0   tee_read_fdt:433 fine node /firmware/optee failed with FDT_ERR_NOTFOUND
[00.362]smc_tee_inform_fdt failed with: -65536[00.367]CPU=1200 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.373]gic: sec monitor mode
[00.376]flash init start
[00.378]workmode = 0,storage type = 1
[00.381][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.387][mmc]: get sdc_type fail and use default host:tm1.
[00.393][mmc]: can't find node "mmc0",will add new node
[00.397][mmc]: fdt err returned <no error>
[00.401][mmc]: Using default timing para
[00.405][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.422][mmc]: card_caps:0x3000000a
[00.425][mmc]: host_caps:0x3000003f
[00.429]sunxi flash init ok
[00.431]line:703 init_clocks
[00.434]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.449]unable to map hdmi registers
[00.452]drv_disp_init finish
[00.482]Loading Environment from SUNXI_FLASH... OK
[00.502]boot_gui_init:start
[00.504]set disp.dev2_output_type fail. using defval=0
[00.511]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 3 ms (17.6 KiB/s)
[00.526]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 7 ms (5.2 MiB/s)
[00.553]Item0 (Map) magic is bad
[00.556]the secure storage item0 copy0 magic is bad
[00.572]Item0 (Map) magic is bad
[00.575]the secure storage item0 copy1 magic is bad
[00.579]Item0 (Map) magic is bad
[00.582]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.600]update part info
[00.605]update bootcmd
[00.611]change working_fdt 0x43e79e70 to 0x43e59e70
disable nand error: FDT_ERR_BADPATH
[00.632]update dts
Hit any key to stop autoboot:  1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.700]LCD open finish                                                                                                                                                                                     0
[02.418]no vendor_boot partition is found
Android's image name: sun8i_arm
[02.436]Starting kernel ...

[02.438][mmc]: MMC Device 2 not found
[02.442][mmc]: mmc 2 not find, so not exit
[    0.000000] 000: printk: bootconsole [earlycon0] enabled
[    0.000000] 000: Memory policy: Data cache writealloc
[    0.000000] 000: cma: Reserved 4 MiB at 0x47c00000
[    0.000000] 000: On node 0 totalpages: 32768
[    0.000000] 000:   Normal zone: 256 pages used for memmap
[    0.000000] 000:   Normal zone: 0 pages reserved
[    0.000000] 000:   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] 000: psci: probing for conduit method from DT.
[    0.000000] 000: psci: PSCIv1.0 detected in firmware.
[    0.000000] 000: psci: Using standard PSCI v0.2 function IDs
[    0.000000] 000: psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] 000: psci: SMC Calling Convention v1.0
[    0.000000] 000: percpu: Embedded 11 pages/cpu s15488 r8192 d21376 u45056
[    0.000000] 000: pcpu-alloc: s15488 r8192 d21376 u45056 alloc=11*4096
[    0.000000] 000:
[    0.000000] 000: pcpu-alloc:
[    0.000000] 000: [0]
[    0.000000] 000: 0
[    0.000000] 000: [0]
[    0.000000] 000: 1
[    0.000000] 000:
[    0.000000] 000: Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] 000: Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:private@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05(11/13/2023-00:18:28) mbr_offset=1032192 disp_reserve=1536000,0x43f04000 androidboot.dramsize=128
[    0.000000] 000: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000000] 000: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] 000: mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] 000: Memory: 104820K/131072K available (7168K kernel code, 435K rwdata, 2152K rodata, 1024K init, 191K bss, 22156K reserved, 4096K cma-reserved)
[    0.000000] 000: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] 000: rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 000: rcu:        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 000: rcu:        RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 000: rcu:        RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.000000] 000:     No expedited grace period (rcu_normal_after_boot).
[    0.000000] 000:     Tasks RCU enabled.
[    0.000000] 000: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] 000: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 000: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] 000: rcu:        Offload RCU callbacks from CPUs: (none).
[    0.000000] 000: random: get_random_bytes called from start_kernel+0x264/0x3e4 with crng_init=0
[    0.000000] 000: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] 000: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] 000: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008843] 000: Switching to timer-based delay loop, resolution 41ns
[    0.015726] 000: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.025857] 000: Console: colour dummy device 80x30
[    0.030944] 000: Calibrating delay loop (skipped), value calculated using timer frequency..
[    0.039785] 000: 48.00 BogoMIPS (lpj=240000)
[    0.044247] 000: pid_max: default: 32768 minimum: 301
[    0.049650] 000: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.057772] 000: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.066636] 000: CPU: Testing write buffer coherency:
[    0.072082] 000: ok
[    0.074496] 000: /cpus/cpu@0 missing clock-frequency property
[    0.080390] 000: /cpus/cpu@1 missing clock-frequency property
[    0.086428] 000: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093138] 000: Setting up static identity map for 0x40100000 - 0x40100060
[    0.100263] 000: rcu: Hierarchical SRCU implementation.
[    0.106338] 000: smp: Bringing up secondary CPUs ...
[    0.112719] 001: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.119252] 000: smp: Brought up 1 node, 2 CPUs
[    0.123947] 000: SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.130873] 000: CPU: All CPU(s) started in SVC mode.
[    0.136263] 000: CPU1: update max cpu_capacity 1024
[    0.141681] 001: devtmpfs: initialized
[    0.146235] 000: CPU0: update max cpu_capacity 1024
[    0.160538] 001: VFP support v0.3:
[    0.164200] 001: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.171553] 001: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.181896] 001: futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.189556] 001: pinctrl core: initialized pinctrl subsystem
[    0.196864] 001: NET: Registered protocol family 16
[    0.205001] 001: DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.253448] 001: rtc_ccu: sunxi ccu init OK
[    0.259676] 001: ccu: sunxi ccu init OK
[    0.264180] 001: r_ccu: sunxi ccu init OK
[    0.353636] 001: iommu: Default domain type: Translated
[    0.359584] 001: sunxi iommu: irq = 24
[    0.364863] 001: SCSI subsystem initialized
[    0.372600] 001: pwm module init!
[    0.378720] 001: clocksource: Switched to clocksource arch_sys_counter
[    0.396653] 001: sun8iw20-pinctrl 2000000.pinctrl: initialized sunXi PIO driver
[    0.419538] 001: thermal_sys: Registered thermal governor 'step_wise'
[    0.426202] 001: thermal_sys: Registered thermal governor 'user_space'
[    0.432795] 001: thermal_sys: Registered thermal governor 'power_allocator'
[    0.440639] 001: NET: Registered protocol family 2
[    0.446260] 001: tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 4096 bytes, linear)
[    0.455187] 001: TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.463565] 001: TCP bind hash table entries: 1024 (order: 2, 28672 bytes, linear)
[    0.471338] 001: TCP: Hash tables configured (established 1024 bind 1024)
[    0.478577] 001: UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.486041] 001: UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.493819] 001: NET: Registered protocol family 1
[    0.500314] 001: sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pc not found, using dummy regulator
[    0.511865] 000: spi spi0: spi0 supply spi not found, using dummy regulator
[    0.519216] 000: sunxi_spi_resource_get()2198 - [spi0] SPI MASTER MODE
[    0.526081] 000: sunxi_spi_resource_get()2236 - Failed to get sample mode
[    0.532991] 000: sunxi_spi_resource_get()2241 - Failed to get sample delay
[    0.539954] 000: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.548844] 000: sunxi_spi_clk_init()2287 - [spi0] mclk 100000000
[    0.555839] 000: sunxi_spi_probe()2700 - [spi0]: driver probe succeed, base c881d000, irq 39
[    0.566420] 000: Initialise system trusted keyrings
[    0.571532] 000: workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    0.589421] 001: ntfs: driver 2.1.32 [Flags: R/W].
[    0.594698] 001: NET: Registered protocol family 38
[    0.600154] 001: Key type asymmetric registered
[    0.604881] 001: Asymmetric key parser 'x509' registered
[    0.610561] 001: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.618390] 001: io scheduler mq-deadline registered
[    0.623855] 001: io scheduler kyber registered
[    0.630006] 001: [DISP]disp_module_init
[    0.634735] 001: disp 5000000.disp: Adding to iommu group 0
[    0.641333] 001: [DISP] parser_disp_init_para,line:1430:
[    0.646660] 001: of_property_read fb0_width fail
[    0.651478] 001: [DISP] disp_init,line:2387:
[    0.655759] 001: smooth display screen:0 type:1 mode:4
[    0.674918] 000: display_fb_request,fb_id:0
[    0.681907] 000: disp_al_manager_apply ouput_type:1
[    0.687250] 000: sunxi_pwm_enable_dual: can't parse pwm device
[    0.689350] 001: [DISP]disp_module_init finish
[    0.699851] 001: sunxi_sid_init()563 - insmod ok
[    0.701230] 000: free logo buffer src_phy_addr=0x43f04000  fb_height=480  src_stride=3200
[    0.705051] 001: pwm-regulator: supplied by regulator-dummy
[    0.714583] 000: Freeing logo buffer memory: 1500K
[    0.720399] 001: sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    0.735045] 001: uart uart0: get regulator failed
[    0.740087] 001: uart uart0: uart0 supply uart not found, using dummy regulator
[    0.748093] 001: uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.756668] 001: sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
[    0.765428] 001: printk: console [ttyS0] enabled
[    0.770232] 001: printk: bootconsole [earlycon0] disabled
[    0.511865] 000: spi spi0: spi0 supply spi not found, using dummy regulator
** 3 printk messages dropped **
[    0.539954] 000: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
** 16 printk messages dropped **
[    0.655759] 001: smooth display screen:0 type:1 mode:4
[    0.674918] 000: display_fb_request,fb_id:0
[    0.681907] 000: disp_al_manager_apply ouput_type:1
[    0.687250] 000: sunxi_pwm_enable_dual: can't parse pwm device
[    0.689350] 001: [DISP]disp_module_init finish
[    0.699851] 001: sunxi_sid_init()563 - insmod ok
[    0.701230] 000: free logo buffer src_phy_addr=0x43f04000  fb_height=480  src_stride=3200
[    0.705051] 001: pwm-regulator: supplied by regulator-dummy
[    0.714583] 000: Freeing logo buffer memory: 1500K
[    0.720399] 001: sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pe not found, using dummy regulator
[    0.735045] 001: uart uart0: get regulator failed
[    0.740087] 001: uart uart0: uart0 supply uart not found, using dummy regulator
[    0.748093] 001: uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.756668] 001: sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
[    0.765428] 001: printk: console [ttyS0] enabled
[    0.770232] 001: printk: bootconsole [earlycon0] disabled
[    0.777012] 001: misc dump reg init
[    0.779024] 000: sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pg not found, using dummy regulator
[    0.779244] 000: sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    0.779284] 000: sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    0.779296] 000: sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    0.779311] 000: sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    0.779319] 000: sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    0.779339] 000: sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    0.779362] 000: sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    0.779410] 000: sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    0.779433] 000: sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    0.779731] 000: sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    0.779753] 000: sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    0.779778] 000: sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0
[    0.781376] 000: sunxi-spinand: AW SPINand MTD Layer Version: 2.0 20201228
[    0.781391] 000: sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.10 20200306
[    0.791613] 000: random: fast init done
[    1.361873] 000: random: crng init done
[    1.778900] 000: sunxi-spinand-phy: read id failed : -110
[    1.778934] 000: spi-nand: probe of spi0.0 failed with error -110
[    1.779503] 000: libphy: Fixed MDIO Bus: probed
[    1.779514] 000: CAN device driver interface
[    1.789908] 000: sunxi-rfkill soc@3000000:rfkill@0: wlan power on success
[    1.889929] 001: sunxi-rfkill soc@3000000:rfkill@0: bus_index: 1
[    1.889941] 001: sunxi_hosts[1] should not be null
[    1.890612] 001: sunxi_gpadc_init,2137, success
[    1.890918] 001: sunxi_gpadc_setup: get channel scan data failed
[    1.891238] 001: input: sunxi-gpadc0 as /devices/virtual/input/input0
[    1.893895] 001: sunxi-rtc 7090000.rtc: registered as rtc0
[    1.894020] 001: sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T05:46:52 UTC (20812)
[    1.894046] 001: sunxi-rtc 7090000.rtc: sunxi rtc probed
[    1.894431] 001: i2c /dev entries driver
[    1.894586] 001: IR NEC protocol handler initialized
[    1.894591] 001: IR RC5(x/sz) protocol handler initialized
[    1.894860] 001: sunxi cedar version 1.1
[    1.895023] 001: sunxi-cedar 1c0e000.ve: Adding to iommu group 0
[    1.895068] 001: VE: sunxi_cedar_probe power-domain init!!!
[    1.895079] 001: VE: install start!!!
[    1.895079] 001:
[    1.895647] 001: VE: cedar-ve the get irq is 40
[    1.895647] 001:
[    1.896174] 001: VE: ve_debug_proc_info:e0c046d9, data:3d3fa811, lock:bb191413
[    1.896174] 001:
[    1.896190] 001: VE: install end!!!
[    1.896190] 001:
[    1.896193] 001: VE: sunxi_cedar_probe
[    1.897630] 000: sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.900953] 000: sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-05-24 16:10)
[    1.901148] 000: sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    1.901218] 000: sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    1.901224] 000: sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    1.901229] 000: sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    1.901235] 000: sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    1.901240] 000: sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    1.901245] 000: sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    1.901251] 000: sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    1.901834] 000: sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    1.902437] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.902479] 000: sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    1.915008] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.927896] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.927995] 000: sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    1.928471] 000: sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.21 2021-05-24 16:10)
[    1.928655] 000: sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    1.929008] 000: sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    1.929018] 000: sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    1.929023] 000: sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    1.929028] 000: sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    1.929033] 000: sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    1.929038] 000: sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    1.929043] 000: sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    1.929067] 000: sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    1.930048] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.930090] 000: sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    1.930945] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.933305] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.936292] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.942617] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.955230] 000: sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    1.955996] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.956341] 000: mmc0: host does not support reading read-only switch, assuming write-enable
[    1.956751] 000: sunxi-msgbox 3003000.msgbox: sunxi msgbox driver probe ...
[    1.957562] 000: sunxi-msgbox 3003000.msgbox: sunxi msgbox driver init ok...
[    1.958234] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    1.958339] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    1.958502] 000: sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    1.958567] 000: mmc0: new high speed SDXC card at address b368
[    1.959133] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    1.960045] 000: mmcblk0: mmc0:b368 NCard 58.2 GiB
[    1.961000] 000: sunxi-mmc 4021000.sdmmc: card claims to support voltages below defined range
[    1.964723] 000:  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    1.969876] 000: NET: Registered protocol family 10
[    1.971764] 000: Segment Routing with IPv6
[    1.971884] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    1.971991] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    1.972151] 000: sunxi-mmc 4021000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    1.973648] 000: mmc1: new high speed SDIO card at address 0001
[    1.988798] 000: sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.997060] 000: NET: Registered protocol family 17
[    1.997103] 000: NET: Registered protocol family 15
[    1.997111] 000: can: controller area network core (rev 20170425 abi 9)
[    1.997239] 000: NET: Registered protocol family 29
[    1.997250] 000: can: raw protocol (rev 20170425)
[    1.997254] 000: can: broadcast manager protocol (rev 20170425 t)
[    1.997266] 000: can: netlink gateway (rev 20190810) max_hops=1
[    1.997981] 000: Registering SWP/SWPB emulation handler
[    2.019283] 001: Loading compiled-in X.509 certificates
[    2.022313] 001: HDMI 2.0 driver init start!
[    2.022325] 001: boot_hdmi=false
[    2.022382] 001: ERROR: can not get hdmi_cts_compatibility
[    2.022387] 001: ERROR: can not get hdmi_hdcp_enable
[    2.022396] 001: ERROR: pinctrl_get for HDMI2.0 DDC fail
[    2.022400] 001: ERROR: can not get ddc_en_io_ctrl
[    2.022445] 001: ERROR: can not get hdmi_power_cnt
[    2.024160] 001: HDMI2.0 module init end
[    2.049841] 001: sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[    2.050920] 001: sunxi-i2c sunxi-i2c2: probe success
[    2.053735] 001: sun8iw20-pinctrl 2000000.pinctrl: 2000000.pinctrl supply vcc-pb not found, using dummy regulator
[    2.056192] 001: cpu cpu0: opp_parse_supplies: opp-microvolt missing although OPP managing regulators
[    2.056206] 001: cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -22
[    2.061011] 001: OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[    2.061048] 001: cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.063991] 001: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.064018] 001: clk: Not disabling unused clocks
[    2.064035] 001: alloc_fd: slot 0 not NULL!
[    2.064196] 001: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.064209] 001: cfg80211: failed to load regulatory.db
[    2.089702] 001: Waiting 2 sec before mounting root device...
[    4.122904] 001: EXT4-fs (mmcblk0p5): INFO: recovery required on readonly filesystem
[    4.122920] 001: EXT4-fs (mmcblk0p5): write access will be enabled during recovery
[    4.180526] 001: EXT4-fs (mmcblk0p5): recovery complete
[    4.186598] 001: EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[    4.186694] 001: VFS: Mounted root (ext4 filesystem) readonly on device 179:5.
[    4.198828] 001: Freeing unused kernel memory: 1024K
[    4.238910] 000: Run /sbin/init as init process
[    4.392722] 001: EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
Starting syslogd: OK
Starting klogd: OK
Populating /dev using udev: [    4.647894] 001: udevd[1048]: starting version 3.2.7
[    4.698274] 001: udevd[1048]: specified group 'kvm' unknown
[    4.745421] 000: udevd[1049]: starting eudev-3.2.7
done
Initializing random number generator... done.
[    5.668799] 001: hdmi_hpd_sys_config_release
Successfully initialized wpa_supplicant
udhcpc: started, v1.29.3
udhcpc: sending discover
[    8.800119] 000: IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
udhcpc: sending discover
udhcpc: sending select for 192.168.0.104
udhcpc: lease of 192.168.0.104 obtained, lease time 172800
deleting routers
adding dns 192.168.1.1
adding dns 192.168.0.1
Starting ntpd: OK
Starting mosquitto: OK
Starting sshd: OK
Starting telnetd: OK
mount: mounting /dev/mmcblk0p7 on /run/media/mmcblk0p7 failed: Invalid argument
mount: mounting /dev/mmcblk0p3 on /run/media/mmcblk0p3 failed: Invalid argument
[   10.718410] 001: FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
mount: mounting /dev/mmcblk0p6 on /run/media/mmcblk0p6 failed: Invalid argument
mount: mounting /dev/mmcblk0p4 on /run/media/mmcblk0p4 failed: Invalid argument
mount: mounting /dev/mmcblk0p2 on /run/media/mmcblk0p2 failed: Invalid argument
mount: mounting /dev/mmcblk0p8 on /run/media/mmcblk0p8 failed: Invalid argument
/etc/init.d/rcS: line 49: Launcher: command not found
Welcome to Allwinner KunoOS Platform
T113-MY-LCPI login: root (automatic login)

#
#
#

默

@awwwwa 谢谢大佬，我用最小的内核配置编译，现在能进系统了。
tina的编译脚步真让人抓狂，看了很久都不知道linux 内核的配置从哪些文件合并的。

默

@awwwwa 谢谢你，我试了下，又卡在另一个地方，还在扒资料。

[247]HELLO! BOOT0 is starting!
[250]BOOT0 commit : adaf1174cc
[253]set pll start
[259]periph0 has been enabled
[262]set pll end
[264][pmu]: bus read error
[266]board init ok
[268]ZQ value = 0x2f
[270]get_pmu_exist() = -1
[273]ddr_efuse_type: 0xa
[275]trefi:7.8ms
[278][AUTO DEBUG] single rank and full DQ!
[282]ddr_efuse_type: 0xa
[285]trefi:7.8ms
[287][AUTO DEBUG] rank 0 row = 13
[290][AUTO DEBUG] rank 0 bank = 8
[294][AUTO DEBUG] rank 0 page size = 2 KB
[298]DRAM BOOT DRIVE INFO: V0.33
[301]DRAM CLK = 936 MHz
[303]DRAM Type = 3 (2:DDR2,3:DDR3)
[307]DRAMC read ODT  off.
[309]DRAM ODT value: 0x42.
[312]ddr_efuse_type: 0xa
[315]DRAM SIZE =128 M
[317]dram_tpr4:0x0
[319]PLL_DDR_CTRL_REG:0xf8004d00
[322]DRAM_CLK_REG:0xc0000000
[325][TIMING DEBUG] MR2= 0x20
[333]DRAM simple test OK.
[335]rtc standby flag is 0x0, super standby flag is 0x0
[341]dram size =128
[344]card no is 0
[345]sdcard 0 line count 4
[348][mmc]: mmc driver ver 2021-05-21 14:47
[357][mmc]: Wrong media type 0x0
[360][mmc]: ***Try SD card 0***
[379][mmc]: HSSDR52/SDR25 4 bit
[381][mmc]: 50000000 Hz
[384][mmc]: 30436 MB
[386][mmc]: ***SD/MMC 0 init OK!!!***
[483]Loading boot-pkg Succeed(index=0).
[486]Entry_name        = u-boot
[493]Entry_name        = optee
[497]Entry_name        = dtb
[500]mmc not para
[502]Jump to second Boot.
M/TC: OP-TEE version: e9372c9c-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #2 Sat Mar 19 11:09:45 UTC 2022 arm


U-Boot 2018.05 (Nov 02 2023 - 16:17:13 +0800) Allwinner Technology

[00.555]CPU:   Allwinner Family
[00.558]Model: sun8iw20
[00.560]DRAM:  128 MiB
[00.563]Relocation Offset is: 04ebc000
[00.589]secure enable bit: 0
E/TC:0   tee_read_fdt:433 fine node /firmware/optee failed with FDT_ERR_NOTFOUND
[00.601]smc_tee_inform_fdt failed with: -65536[00.605]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.611]gic: sec monitor mode
[00.614]flash init start
[00.616]workmode = 0,storage type = 1
[00.620][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.625][mmc]: get sdc_type fail and use default host:tm1.
[00.631][mmc]: can't find node "mmc0",will add new node
[00.636][mmc]: fdt err returned <no error>
[00.640][mmc]: Using default timing para
[00.643][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.670][mmc]: card_caps:0x3000000a
[00.673][mmc]: host_caps:0x3000003f
[00.681]sunxi flash init ok
[00.684]line:703 init_clocks
[00.687]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.703]unable to map hdmi registers
[00.706]drv_disp_init finish
[00.721]Loading Environment from SUNXI_FLASH... OK
[00.740]boot_gui_init:start
[00.743]set disp.dev2_output_type fail. using defval=0
[00.750]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[00.764]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[00.796]Item0 (Map) magic is bad
[00.798]the secure storage item0 copy0 magic is bad
[00.818]Item0 (Map) magic is bad
[00.821]the secure storage item0 copy1 magic is bad
[00.825]Item0 (Map) magic is bad
[00.828]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.847]update part info
[00.850]update bootcmd
[00.853]change working_fdt 0x43e7be70 to 0x43e5be70
disable nand error: FDT_ERR_BADPATH
[00.874]update dts
Hit any key to stop autoboot:  1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.939]LCD open finish                                                                                                                                                           0
[02.627]no vendor_boot partition is found
Android's image name: sun8i_arm
[02.645]Starting kernel ...

[02.648][mmc]: MMC Device 2 not found
[02.651][mmc]: mmc 2 not find, so not exit
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.61 (ubuntu@win) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #3 SMP PREEMPT Thu Nov 2 16:16:30 CST 2023
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: sun8iw20
[    0.000000] printk: bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 4 MiB at 0x47c00000
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 15 pages/cpu s30912 r8192 d22336 u61440
[    0.000000] pcpu-alloc: s30912 r8192 d22336 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:private@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05(11/02/2023-16:17:13) mbr_offset=1032192 disp_reserve=1536000,0x43f06000 androidboot.dramsize=128
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 104900K/131072K available (7168K kernel code, 406K rwdata, 2356K rodata, 1024K init, 171K bss, 22076K reserved, 4096K cma-reserved)
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x254/0x3d0 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008009] Switching to timer-based delay loop, resolution 41ns
[    0.014183] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.023931] Console: colour dummy device 80x30
[    0.028401] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.038753] pid_max: default: 32768 minimum: 301
[    0.043436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.050761] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.059084] CPU: Testing write buffer coherency: ok
[    0.064300] /cpus/cpu@0 missing clock-frequency property
[    0.069619] /cpus/cpu@1 missing clock-frequency property
[    0.074989] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.081332] Setting up static identity map for 0x40100000 - 0x40100060
[    0.088036] rcu: Hierarchical SRCU implementation.
[    0.093186] BOOTEVENT:        93.176499: ON
[    0.097569] smp: Bringing up secondary CPUs ...
[    0.103392] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.103546] smp: Brought up 1 node, 2 CPUs
[    0.113354] SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.119550] CPU: All CPU(s) started in SVC mode.
[    0.124764] devtmpfs: initialized
[    0.217196] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.227240] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.237123] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.246088] pinctrl core: initialized pinctrl subsystem
[    0.257540] NET: Registered protocol family 16
[    0.265919] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.553344] rtc_ccu: sunxi ccu init OK
[    0.592855] ccu: sunxi ccu init OK
[    0.600033] r_ccu: sunxi ccu init OK
[    1.001237] iommu: Default domain type: Translated
[    1.006325] sunxi iommu: irq = 24
[    1.030361] SCSI subsystem initialized
[    1.042196] usbcore: registered new interface driver usbfs
[    1.047896] usbcore: registered new interface driver hub
[    1.053343] usbcore: registered new device driver usb
[    1.062881] mc: Linux media interface: v0.10
[    1.067975] videodev: Linux video capture interface: v2.00
[    1.089001] Advanced Linux Sound Architecture Driver Initialized.
[    1.108860] Bluetooth: Core ver 2.22
[    1.112560] NET: Registered protocol family 31
[    1.117018] Bluetooth: HCI device and connection manager initialized
[    1.123496] Bluetooth: HCI socket layer initialized
[    1.128400] Bluetooth: L2CAP socket layer initialized
[    1.133499] Bluetooth: SCO socket layer initialized
[    1.139322] pwm module init!
[    1.148384] g2d 5410000.g2d: Adding to iommu group 0
[    1.158870] G2D: rcq version initialized.major:251
[    1.170738] clocksource: Switched to clocksource arch_sys_counter
[    1.338608] sun8iw20-pinctrl pio: initialized sunXi PIO driver
[    1.672247] thermal_sys: Registered thermal governor 'step_wise'
[    1.672253] thermal_sys: Registered thermal governor 'user_space'
[    1.695037] NET: Registered protocol family 2
[    1.709148] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    1.717579] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.725329] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    1.732420] TCP: Hash tables configured (established 1024 bind 1024)
[    1.738880] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.745459] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.752647] NET: Registered protocol family 1
[    1.774557] sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[    1.783095] spi spi0: spi0 supply spi not found, using dummy regulator
[    1.789972] sunxi_spi_resource_get()2116 - [spi0] SPI MASTER MODE
[    1.801647] sunxi_spi_resource_get()2154 - Failed to get sample mode
[    1.808026] sunxi_spi_resource_get()2159 - Failed to get sample delay
[    1.814510] sunxi_spi_resource_get()2163 - sample_mode:-1431633921 sample_delay:-1431633921
[    1.822952] sunxi_spi_clk_init()2205 - [spi0] mclk 100000000
[    1.835859] sunxi_spi_probe()2623 - [spi0]: driver probe succeed, base c881f000, irq 39
[    1.870789] Initialise system trusted keyrings
[    1.877423] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[    1.890123] fuse: init (API version 7.31)
[    1.929349] NET: Registered protocol family 38
[    1.933863] Key type asymmetric registered
[    1.937983] Asymmetric key parser 'x509' registered
[    1.943011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.950409] io scheduler mq-deadline registered
[    1.954966] io scheduler kyber registered
[    1.959070] atomic64_test: passed
[    1.975260] [DISP]disp_module_init
[    1.979405] disp 5000000.disp: Adding to iommu group 0
[    1.993670] [DISP] parser_disp_init_para,line:1430:
[    1.993675] of_property_read fb0_width fail
[    2.002782] [DISP] disp_init,line:2386:
[    2.002787] smooth display screen:0 type:1 mode:4
[    2.032723] display_fb_request,fb_id:0
[    2.041840] Freeing logo buffer memory: 1500K
[    2.052537] disp_al_manager_apply ouput_type:1
[    2.057264] sunxi_pwm_enable_dual: can't parse pwm device
[    2.065078] [DISP]disp_module_init finish
[    2.076224] sunxi_sid_init()551 - insmod ok
[    2.081018] pwm-regulator: supplied by regulator-dummy
[    2.113647] sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[    2.121892] uart uart0: uart0 supply uart not found, using dummy regulator
[    2.139741] uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    2.147633] sw_console_setup()1808 - console setup baud 115200 parity n bits 8, flow n
[    2.155649] printk: console [ttyS0] enabled
[    2.155649] printk: console [ttyS0] enabled
[    2.164533] printk: bootconsole [earlycon0] disabled
[    2.164533] printk: bootconsole [earlycon0] disabled
[    2.186007] misc dump reg init
[    2.217856] sun8iw20-pinctrl pio: pio supply vcc-pg not found, using dummy regulator
[    2.226975] sunxi-rfkill soc@3000000:rfkill@0: module version: v1.0.9
[    2.234262] sunxi-rfkill soc@3000000:rfkill@0: get gpio chip_en failed
[    2.241606] sunxi-rfkill soc@3000000:rfkill@0: get gpio power_en failed
[    2.249002] sunxi-rfkill soc@3000000:rfkill@0: wlan_busnum (1)
[    2.255550] sunxi-rfkill soc@3000000:rfkill@0: Missing wlan_power.
[    2.262491] sunxi-rfkill soc@3000000:rfkill@0: wlan clock[0] (32k-fanout1)
[    2.270237] sunxi-rfkill soc@3000000:rfkill@0: wlan_regon gpio=204 assert=1
[    2.278087] sunxi-rfkill soc@3000000:rfkill@0: wlan_hostwake gpio=202 assert=1
[    2.286196] sunxi-rfkill soc@3000000:rfkill@0: wakeup source is enabled
[    2.296788] sunxi-rfkill soc@3000000:rfkill@0: Missing bt_power.
[    2.304142] sunxi-rfkill soc@3000000:rfkill@0: bt clock[0] (32k-fanout1)
[    2.313348] sunxi-rfkill soc@3000000:rfkill@0: bt_rst gpio=210 assert=0
[    2.336123] [ADDR_MGT] addr_mgt_probe: module version: v1.0.11
[    2.343489] [ADDR_MGT] addr_mgt_probe: success.
[    2.373768] libphy: Fixed MDIO Bus: probed
[    2.381798] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.389126] sunxi-ehci: EHCI SUNXI driver
[    2.396169] get ehci1-controller wakeup-source is fail.
[    2.405974] sunxi ehci1-controller don't init wakeup source
[    2.412257] [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xc0c86cd8, 0x:c8835000, irq_no:3a
[    2.424265] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply drvvbus not found, using dummy regulator
[    2.438945] sunxi-ehci 4200000.ehci1-controller: 4200000.ehci1-controller supply hci not found, using dummy regulator
[    2.451168] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
[    2.458438] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 1
[    2.471454] sunxi-ehci 4200000.ehci1-controller: irq 58, io mem 0x04200000
[    2.500773] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
[    2.518585] hub 1-0:1.0: USB hub found
[    2.522901] hub 1-0:1.0: 1 port detected
[    2.547997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.554959] sunxi-ohci: OHCI SUNXI driver
[    2.559978] get ohci1-controller wakeup-source is fail.
[    2.565978] sunxi ohci1-controller don't init wakeup source
[    2.572262] [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xc0c86f68
[    2.581924] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply drvvbus not found, using dummy regulator
[    2.601216] sunxi-ohci 4200400.ohci1-controller: 4200400.ohci1-controller supply hci not found, using dummy regulator
[    2.613463] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
[    2.623715] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 2
[    2.633783] sunxi-ohci 4200400.ohci1-controller: irq 59, io mem 0x04200400
[    2.724846] hub 2-0:1.0: USB hub found
[    2.729110] hub 2-0:1.0: 1 port detected
[    2.752872] usbcore: registered new interface driver uas
[    2.758992] usbcore: registered new interface driver usb-storage
[    2.765863] usbcore: registered new interface driver ums-alauda
[    2.772580] usbcore: registered new interface driver ums-cypress
[    2.779399] usbcore: registered new interface driver ums-datafab
[    2.789203] usbcore: registered new interface driver ums_eneub6250
[    2.796287] usbcore: registered new interface driver ums-freecom
[    2.803099] usbcore: registered new interface driver ums-isd200
[    2.809815] usbcore: registered new interface driver ums-jumpshot
[    2.816781] usbcore: registered new interface driver ums-karma
[    2.823395] usbcore: registered new interface driver ums-onetouch
[    2.839265] usbcore: registered new interface driver ums-realtek
[    2.846336] usbcore: registered new interface driver ums-sddr09
[    2.853064] usbcore: registered new interface driver ums-sddr55
[    2.859815] usbcore: registered new interface driver ums-usbat
[    2.876235] sunxi_gpadc_init,2151, success
[    2.881196] sunxi_gpadc_setup: get channel scan data failed
[    2.893955] input: sunxi-gpadc0 as /devices/virtual/input/input0
[    2.917372] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.928106] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.954834] sunxi-rtc 7090000.rtc: registered as rtc0
[    2.960544] sunxi-rtc 7090000.rtc: Warning: Using internal RC 16M clock source. Time may be inaccurate!
[    2.971171] sunxi-rtc 7090000.rtc: setting system clock to 1970-01-01T01:21:22 UTC (4882)
[    2.980363] sunxi-rtc 7090000.rtc: sunxi rtc probed
[    2.986366] i2c /dev entries driver
[    2.990495] IR NEC protocol handler initialized
[    2.995599] IR RC5(x/sz) protocol handler initialized
[    3.004976] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
[    3.015164] [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    3.024908] [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    3.034565] [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    3.044429] [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL!
[    3.054572] [VIN_WARN]sensor_helper_probe: cannot get sensor1_iovdd supply, setting it to NULL!
[    3.064324] [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL!
[    3.073971] [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL!
[    3.090140] usbcore: registered new interface driver uvcvideo
[    3.096628] USB Video Class driver (1.1.1)
[    3.101238] gspca_main: v2.14.0 registered
[    3.105810] sunxi cedar version 1.1
[    3.123521] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    3.132789] Bluetooth: HCI UART driver ver 2.3
[    3.137762] Bluetooth: HCI UART protocol H4 registered
[    3.143866] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 1.0.10
[    3.187953] sunxi-mmc 4020000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    3.197944] sunxi-mmc 4020000.sdmmc: ***ctl-spec-caps*** 8
[    3.204151] sunxi-mmc 4020000.sdmmc: No vmmc regulator found
[    3.210513] sunxi-mmc 4020000.sdmmc: No vqmmc regulator found
[    3.217008] sunxi-mmc 4020000.sdmmc: No vdmmc regulator found
[    3.223456] sunxi-mmc 4020000.sdmmc: No vd33sw regulator found
[    3.229987] sunxi-mmc 4020000.sdmmc: No vd18sw regulator found
[    3.236530] sunxi-mmc 4020000.sdmmc: No vq33sw regulator found
[    3.243058] sunxi-mmc 4020000.sdmmc: No vq18sw regulator found
[    3.250118] sunxi-mmc 4020000.sdmmc: Got CD GPIO
[    3.255774] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.266989] sunxi-mmc 4020000.sdmmc: no vqmmc,Check if there is regulator
[    3.287123] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.312316] sunxi-mmc 4020000.sdmmc: detmode:gpio irq
[    3.318001] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.327674] sunxi-mmc 4021000.sdmmc: SD/MMC/SDIO Host Controller Driver(v4.22 2021-12-20 15:40)
[    3.339556] sunxi-mmc 4021000.sdmmc: ***ctl-spec-caps*** 8
[    3.340609] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.345782] sunxi-mmc 4021000.sdmmc: No vmmc regulator found
[    3.363726] sunxi-mmc 4021000.sdmmc: No vqmmc regulator found
[    3.370167] sunxi-mmc 4021000.sdmmc: No vdmmc regulator found
[    3.376616] sunxi-mmc 4021000.sdmmc: No vd33sw regulator found
[    3.376630] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.383161] sunxi-mmc 4021000.sdmmc: No vd18sw regulator found
[    3.383168] sunxi-mmc 4021000.sdmmc: No vq33sw regulator found
[    3.402564] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.407817] sunxi-mmc 4021000.sdmmc: No vq18sw regulator found
[    3.425958] sunxi-mmc 4021000.sdmmc: Cann't get pin bias hs pinstate,check if needed
[    3.438681] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.449870] sunxi-mmc 4021000.sdmmc: no vqmmc,Check if there is regulator
[    3.470067] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.492486] mmc0: host does not support reading read-only switch, assuming write-enable
[    3.501470] sunxi-mmc 4021000.sdmmc: detmode:manually by software
[    3.508300] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    3.509129] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    3.520043] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[    3.530179] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
[    3.545181] sunxi-mmc 4020000.sdmmc: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[    3.545206] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.556963] mmc0: new high speed SDHC card at address aaaa
[    3.569265] usbcore: registered new interface driver usbhid
[    3.590231] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[    3.591645] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
[    3.602078] usbhid: USB HID core driver
[    3.618801] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    3.628904] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    3.636631]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    3.640156] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    3.651546] sunxi-mmc 4021000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
[    3.658328] sunxi-mmc 4021000.sdmmc: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[    3.709386] [AUDIOCODEC][sunxi_codec_parse_params][2412]:digital_vol:0, lineout_vol:26, mic1gain:31, mic2gain:31 pa_msleep:120, pa_level:1, pa_pwr_level:1
[    3.709386]
[    3.731398] [AUDIOCODEC][sunxi_codec_parse_params][2448]:adcdrc_cfg:0, adchpf_cfg:1, dacdrc_cfg:0, dachpf:0
[    3.742961] [AUDIOCODEC][sunxi_internal_codec_probe][2609]:codec probe finished
[    3.768230] debugfs: Directory '203034c.dummy_cpudai' with parent 'audiocodec' already present!
[    3.778043] [SNDCODEC][sunxi_card_init][583]:card init finished
[    3.788445] sunxi-codec-machine 2030340.sound: 2030000.codec <-> 203034c.dummy_cpudai mapping ok
[    3.832627] input: audiocodec sunxi Audio Jack as /devices/platform/soc@3000000/2030340.sound/sound/card0/input1
[    3.861177] [SNDCODEC][sunxi_card_dev_probe][836]:register card finished
[    3.869318] NET: Registered protocol family 10
[    3.881206] [SNDCODEC][sunxi_hs_init_work][259]:resume-->report switch
[    3.895893] Segment Routing with IPv6
[    3.903378] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.945407] NET: Registered protocol family 17
[    3.950411] NET: Registered protocol family 15
[    3.955572] Bluetooth: RFCOMM TTY layer initialized
[    3.961113] Bluetooth: RFCOMM socket layer initialized
[    3.966903] Bluetooth: RFCOMM ver 1.11
[    3.971864] Registering SWP/SWPB emulation handler
[    3.980612] Loading compiled-in X.509 certificates
[    4.322350] sunxi-i2c sunxi-i2c2: sunxi-i2c2 supply twi not found, using dummy regulator
[    4.352716] sunxi-i2c sunxi-i2c2: probe success
[    4.367074] sun8iw20-pinctrl pio: pio supply vcc-pb not found, using dummy regulator
[    4.427817] platform 2000c13.pwm3: pinctrl_get failed
[    4.436940] platform 2000c13.pwm3: pinctrl_get failed
[    4.442638] cpu cpu0: _set_opp_voltage: failed to set voltage (1000000 1000000 1000000 mV): -19
[    4.455781] platform 2000c13.pwm3: pinctrl_get failed
[    4.464877] platform 2000c13.pwm3: pinctrl_get failed
[    4.470567] cpu cpu0: _set_opp_voltage: failed to set voltage (900000 900000 900000 mV): -19
[    4.480035] cpufreq: __target_index: Failed to change cpu frequency: -19
[    4.495961] get ehci0-controller wakeup-source is fail.
[    4.508653] sunxi ehci0-controller don't init wakeup source
[    4.514944] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0c867b8, 0x:c88da000, irq_no:38
[    4.526953] [sunxi-ehci0]: Not init ehci0
[    4.531931] get ohci0-controller wakeup-source is fail.
[    4.537922] sunxi ohci0-controller don't init wakeup source
[    4.544180] [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xc0c86a48
[    4.553851] [sunxi-ohci0]: Not init ohci0
[    4.562714] platform 2000c13.pwm3: pinctrl_get failed
[    4.573870] platform 2000c13.pwm3: pinctrl_get failed
[    4.574485] get usb_detect_mode is fail, -22
[    4.579532] cpu cpu0: _set_opp_voltage: failed to set voltage (1000000 1000000 1000000 mV): -19
[    4.584623] get det_vbus is fail, -84
[    4.594275] platform 2000c13.pwm3: pinctrl_get failed
[    4.598151] get id is fail, -84
[    4.603914] platform 2000c13.pwm3: pinctrl_get failed
[    4.616201] cpu cpu0: _set_opp_voltage: failed to set voltage (900000 900000 900000 mV): -19
[    4.616463] get ctp_power is fail, -22
[    4.625816] cpufreq: __target_index: Failed to change cpu frequency: -19
[    4.630061] get ctp_power_ldo_vol is fail, -22
[    4.642484] sunxi_ctp_startup: ctp_power_io is invalid.
[    4.648372] get ctp_gesture_wakeup fail, no gesture wakeup
[    4.654534] gt9xxnew_ts 2-0014: 2-0014 supply ctp not found, using dummy regulator
[    4.820807] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    4.828910] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    4.836553] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    4.844645] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    4.852284] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    4.860371] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    4.868012] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    4.876103] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    4.883740] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    4.891830] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    4.899412] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[    5.060742] <<-GTP-ERROR->> GTP i2c test failed time 1.
[    5.090786] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.098878] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.106523] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.114619] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.122262] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.130354] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.138023] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.146120] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.153764] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.161858] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.169444] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[    5.330743] <<-GTP-ERROR->> GTP i2c test failed time 2.
[    5.360783] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.368876] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.376272] random: fast init done
[    5.380284] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.388379] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.396018] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.404109] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.411749] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.419840] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.427481] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.435570] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.443170] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[    5.610747] <<-GTP-ERROR->> GTP i2c test failed time 3.
[    5.640786] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.648880] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.656524] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.664618] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.672262] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.680353] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.687995] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.690741]
[    5.690741] insmod_device_driver
[    5.690741]
[    5.696107] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.703274] sunxi_usb_udc 4100000.udc-controller: 4100000.udc-controller supply udc not found, using dummy regulator
[    5.710630] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.722700] device_chose finished 142!
[    5.730578] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.742222] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[    5.910749] <<-GTP-ERROR->> GTP i2c test failed time 4.
[    5.940793] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.948900] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.956548] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.964658] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.972305] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.980401] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    5.988055] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    5.996149] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    6.003798] sunxi-i2c sunxi-i2c2: SLA+W has been transmitted; ACK not received
[    6.011899] sunxi-i2c sunxi-i2c2: engine-mode: xfer failed(dev addr:0x14)
[    6.019495] <<-GTP-ERROR->> I2C Read: 0x8047, 1 bytes failed, errcode: -22! Process reset.
[    6.180745] <<-GTP-ERROR->> GTP i2c test failed time 5.
[    6.210743] I2C communication ERROR!
[    6.210768] regulator-dummy: Underflow of regulator enable count
[    6.221735] gt9xxnew_ts: probe of 2-0014 failed with error -1
[    6.238631] sun8iw20-pinctrl pio: pin PE2 already requested by 2500000.uart; cannot claim for 5801000.csi
[    6.249491] sun8iw20-pinctrl pio: pin-130 (5801000.csi) status -22
[    6.256434] sun8iw20-pinctrl pio: could not request pin 130 (PE2) from group PE2  on device pio
[    6.266274] vin_csi 5801000.csi: Error applying setting, reverse things back
[    6.274294] vin_csi: probe of 5801000.csi failed with error -22
[    6.350047] sunxi-vin-core 5809000.vinc: Adding to iommu group 0
[    6.365345] sunxi-vin-core 5809200.vinc: Adding to iommu group 0
[    6.384970] [VIN_WARN]get csi isp clk fail
[    6.389580] [VIN_WARN]get csi isp src clk fail
[    6.394617] [VIN_WARN]get csi mipi clk fail
[    6.399296] [VIN_WARN]get csi mipi src clk fail
[    6.404533] [VIN_WARN]get csi isp clk fail
[    6.411723] [VIN_WARN]Get isp reset control fail
[    6.421255] [VIN_ERR]registering ov5640, No such device!
[    6.427200] [VIN_ERR]ov5647 request i2c3 adapter failed!
[    6.433260] ------------[ cut here ]------------
[    6.438426] kernel BUG at /home/tronlong/T113/T113-i_v1.0/kernel/linux-5.4/drivers/media/mc/mc-entity.c:666!
[    6.449398] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[    6.455912] Modules linked in:
[    6.459325] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.61 #3
[    6.465936] Hardware name: Generic DT based system
[    6.471292] PC is at media_create_pad_link+0x30/0x130
[    6.476937] LR is at vin_probe+0xab4/0xe24
[    6.481508] pc : [<c04e5924>]    lr : [<c051bec0>]    psr: 60000113
[    6.488509] sp : c7419d88  ip : 00000001  fp : 00000000
[    6.494340] r10: 00000000  r9 : c09d7723  r8 : c084a0d8
[    6.500176] r7 : 00000002  r6 : c70d758c  r5 : 00000000  r4 : c3cba5c0
[    6.507461] r3 : 00000000  r2 : c3cf0000  r1 : 00000001  r0 : c70d758c
[    6.514754] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    6.522722] Control: 10c5387d  Table: 4000406a  DAC: 00000051
[    6.529142] Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
[    6.535847] Stack: (0xc7419d88 to 0xc741a000)
[    6.540715] 9d80:                   00000000 c3cba5c0 00000000 c70d758c 00000002 c084a0d8
[    6.549852] 9da0: c09d7723 c09d712c c3cbad4c c051bec0 00000000 00000001 c3cbae20 c75591d0
[    6.558994] 9dc0: c3cba5c0 c3cbac70 c3cba5fc c3cba604 00000005 1406f400 5f697363 6b6c636d
[    6.568129] 9de0: 6c705f30 c75b006c c09c5a66 8714496c 00000001 00000000 c75591d0 c0c51428
[    6.577270] 9e00: 00000000 7c53a23c 00000001 fffffdfb c0c84e8c c0413090 c75591d0 00000000
[    6.586405] 9e20: c0c51428 c041144c c75cc3e4 00000004 60000113 00000010 c75592a4 c75591d0
[    6.595546] 9e40: c0c51428 c0c51428 c0411b14 733bcd6f 00000001 c0c66000 00000000 c0411928
[    6.604681] 9e60: c0c51428 c75591d0 8714496c 00000000 c75591d0 c0c51428 c0411b14 733bcd6f
[    6.613823] 9e80: 00000001 c0411afc 00000000 c75591d0 c0c51428 c0411bc0 c75591d0 c7418000
[    6.622959] 9ea0: c0c51428 c040f984 c750d5bc c750d5a8 c75b0cf4 8714496c c750d5bc c0c51428
[    6.632101] 9ec0: 00000000 c3cc2040 c0c38ab0 c0410898 c09d7897 00000001 00000000 c0c51428
[    6.641234] 9ee0: c0c66000 c0b1b328 00000000 c04123a8 00000000 c0c66000 c0b1b328 c0b1b394
[    6.650376] 9f00: c7418000 c0102f6c c0a4c3bc 00000000 00000000 c0133b00 00000000 c0b00514
[    6.659512] 9f20: c0a4b458 000000c6 00000007 00000007 00000000 c0a4c3d0 000000c5 c0a4c3d0
[    6.668654] 9f40: cccccccd c7bff9e7 c7bff9fc 8714496c 00000000 8714496c 00000008 c0c66000
[    6.677790] 9f60: c0b2d038 000000c6 c0c66000 c0b3acc0 c0b2d03c c0b00e04 00000007 00000007
[    6.686932] 9f80: 00000000 c0b00514 00000000 c072ed38 00000000 00000000 00000000 00000000
[    6.696066] 9fa0: 00000000 c072ed40 00000000 c01010e8 00000000 00000000 00000000 00000000
[    6.705207] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    6.714341] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    6.723494] [<c04e5924>] (media_create_pad_link) from [<c051bec0>] (vin_probe+0xab4/0xe24)
[    6.732732] [<c051bec0>] (vin_probe) from [<c0413090>] (platform_drv_probe+0x48/0x98)
[    6.741489] [<c0413090>] (platform_drv_probe) from [<c041144c>] (really_probe+0x1a8/0x418)
[    6.750724] [<c041144c>] (really_probe) from [<c0411928>] (driver_probe_device+0x10c/0x154)
[    6.760061] [<c0411928>] (driver_probe_device) from [<c0411afc>] (device_driver_attach+0x44/0x5c)
[    6.769976] [<c0411afc>] (device_driver_attach) from [<c0411bc0>] (__driver_attach+0xac/0xb8)
[    6.779505] [<c0411bc0>] (__driver_attach) from [<c040f984>] (bus_for_each_dev+0x6c/0xa4)
[    6.788640] [<c040f984>] (bus_for_each_dev) from [<c0410898>] (bus_add_driver+0xd8/0x1b4)
[    6.797784] [<c0410898>] (bus_add_driver) from [<c04123a8>] (driver_register+0xb0/0xf8)
[    6.806727] [<c04123a8>] (driver_register) from [<c0b1b394>] (vin_init+0x6c/0xb8)
[    6.815096] [<c0b1b394>] (vin_init) from [<c0102f6c>] (do_one_initcall+0x7c/0x1b4)
[    6.823555] [<c0102f6c>] (do_one_initcall) from [<c0b00e04>] (kernel_init_freeable+0x108/0x1cc)
[    6.833284] [<c0b00e04>] (kernel_init_freeable) from [<c072ed40>] (kernel_init+0x8/0x118)
[    6.842422] [<c072ed40>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[    6.850880] Exception stack(0xc7419fb0 to 0xc7419ff8)
[    6.856519] 9fa0:                                     00000000 00000000 00000000 00000000
[    6.865660] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    6.874793] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    6.882188] Code: ea000008 e1d0c2b0 e15c0001 8a000001 (e7f001f2)
[    6.888993] ---[ end trace 3b8545bbcdec8364 ]---
[    6.894154] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    6.902712] CPU1: stopping
[    6.905739] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G      D           5.4.61 #3
[    6.913909] Hardware name: Generic DT based system
[    6.919272] [<c010e390>] (unwind_backtrace) from [<c010a934>] (show_stack+0x10/0x14)
[    6.927936] [<c010a934>] (show_stack) from [<c071a558>] (dump_stack+0x7c/0x98)
[    6.936013] [<c071a558>] (dump_stack) from [<c010c730>] (handle_IPI+0xc0/0x168)
[    6.944193] [<c010c730>] (handle_IPI) from [<c036da34>] (gic_handle_irq+0x70/0x78)
[    6.952656] [<c036da34>] (gic_handle_irq) from [<c01021cc>] (__irq_svc+0x6c/0xa8)
[    6.961021] Exception stack(0xc7441f80 to 0xc7441fc8)
[    6.966668] 1f80: 00000f98 c7aca534 00000000 c0114dc0 00000002 c7440000 c0c03de4 c0c03e20
[    6.975815] 1fa0: 4000406a 410fc075 00000000 00000000 c0c708b0 c7441fd0 c0108020 c0108024
[    6.984952] 1fc0: 60000113 ffffffff
[    6.988856] [<c01021cc>] (__irq_svc) from [<c0108024>] (arch_cpu_idle+0x2c/0x38)
[    6.997128] [<c0108024>] (arch_cpu_idle) from [<c013e5d0>] (do_idle+0xb8/0x120)
[    7.005305] [<c013e5d0>] (do_idle) from [<c013e8cc>] (cpu_startup_entry+0x18/0x1c)
[    7.013767] [<c013e8cc>] (cpu_startup_entry) from [<40102c0c>] (0x40102c0c)
[    7.021556] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

默

@xsyr1024
board.dts

/*
 * Allwinner Technology CO., Ltd.
 */

/dts-v1/;

 /* optee used 7MB: SHM 2M: OS: 1M: TA:4M*/
/memreserve/ 0x41B00000 0x00100000;
/* DSP used 1MB */
/*/memreserve/ 0x42000000 0x00100000;*/
#include "sun8iw20p1.dtsi"

/{
	model = "sun8iw20";
	compatible = "allwinner,r528", "arm,sun8iw20p1";

	reg_vdd_cpu: vdd-cpu {
		compatible = "sunxi-pwm-regulator";
		pwms = <&pwm 3 5000 0>;
		regulator-name = "vdd_cpu";
		regulator-min-microvolt = <810000>;
		regulator-max-microvolt = <1160000>;
		regulator-ramp-delay = <25>;
		regulator-always-on;
		regulator-boot-on;
		status = "okay";
	};

	reg_usb1_vbus: usb1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb1-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-enable-ramp-delay = <1000>;
		gpio = <&pio PB 10 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&cpu0 {
	cpu-supply = <&reg_vdd_cpu>;
};

&pio {
	sdc0_pins_a: sdc0@0 {
		allwinner,pins = "PF0", "PF1", "PF2",
				 "PF3", "PF4", "PF5";
		allwinner,function = "sdc0";
		allwinner,muxsel = <2>;
		allwinner,drive = <3>;
		allwinner,pull = <1>;
		pins = "PF0", "PF1", "PF2",
		       "PF3", "PF4", "PF5";
		function = "sdc0";
		drive-strength = <30>;
		bias-pull-up;
		power-source = <3300>;
	};


	sdc0_pins_b: sdc0@1 {
		pins = "PF0", "PF1", "PF2",
		       "PF3", "PF4", "PF5";
		function = "sdc0";
		drive-strength = <30>;
		bias-pull-up;
		power-source = <1800>;
	};

	sdc0_pins_c: sdc0@2 {
		pins = "PF0", "PF1", "PF2",
			"PF3", "PF4", "PF5";
		function = "gpio_in";
	};

	/* TODO: add jtag pin */
	sdc0_pins_d: sdc0@3 {
		pins = "PF2", "PF4";
		function = "uart0";
		drive-strength = <10>;
		bias-pull-up;
	};

	sdc0_pins_e: sdc0@4 {
		pins = "PF0", "PF1", "PF3",
			"PF5";
		function = "jtag";
		drive-strength = <10>;
		bias-pull-up;
	};


	sdc1_pins_a: sdc1@0 {
		pins = "PG0", "PG1", "PG2",
		       "PG3", "PG4", "PG5";
		function = "sdc1";
		drive-strength = <30>;
		bias-pull-up;
	};

	sdc1_pins_b: sdc1@1 {
		pins = "PG0", "PG1", "PG2",
		       "PG3", "PG4", "PG5";
			function = "gpio_in";
	};

	sdc2_pins_a: sdc2@0 {
		allwinner,pins = "PC2", "PC3", "PC4",
				 "PC5", "PC6", "PC7";
		allwinner,function = "sdc2";
		allwinner,muxsel = <3>;
		allwinner,drive = <3>;
		allwinner,pull = <1>;
		pins = "PC2", "PC3", "PC4",
			"PC5", "PC6", "PC7";
		function = "sdc2";
		drive-strength = <30>;
		bias-pull-up;
	};

	sdc2_pins_b: sdc2@1 {
		pins = "PC2", "PC3", "PC4",
		       "PC5", "PC6", "PC7";
		function = "gpio_in";
	};

	wlan_pins_a:wlan@0 {
		pins = "PG11";
		function = "clk_fanout1";
	};

        uart0_pins_a: uart0_pins@0 {  /* For mangopi board */
                pins = "PE2", "PE3";
                function = "uart0";
                drive-strength = <10>;
                bias-pull-up;
        };

        uart0_pins_b: uart0_pins@1 {  /* For mangopi board */
                pins = "PE2", "PE3";
                function = "gpio_in";
        };

	uart1_pins_a: uart1_pins@0 {  /* For EVB1 board */
		pins = "PG6", "PG7", "PG8", "PG9";
		function = "uart1";
		drive-strength = <10>;
		bias-pull-up;
	};

	uart1_pins_b: uart1_pins {  /* For EVB1 board */
		pins = "PG6", "PG7", "PG8", "PG9";
		function = "gpio_in";
	};

	uart2_pins_a: uart2_pins@0 {  /* For EVB1 board */
		pins = "PC0", "PC1";
		function = "uart2";
		drive-strength = <10>;
		bias-pull-up;
	};

	uart2_pins_b: uart2_pins@1 {  /* For EVB1 board */
		pins = "PC0", "PC1";
		function = "gpio_in";
	};

	uart3_pins_a: uart3_pins@0 {  /* For EVB1 board */
		pins = "PD10", "PD11";
		function = "uart3";
		muxsel = <5>;
		drive-strength = <10>;
		bias-pull-up;
	};

	twi0_pins_a: twi0@0 {
		pins = "PB10", "PB11";	/*sck sda*/
		function = "twi0";
		drive-strength = <10>;
	};

	twi0_pins_b: twi0@1 {
		pins = "PB10", "PB11";
		function = "gpio_in";
	};

	twi1_pins_a: twi1@0 {
		pins = "PB4", "PB5";
		function = "twi1";
		drive-strength = <10>;
	};

	twi1_pins_b: twi1@1 {
		pins = "PB4", "PB5";
		function = "gpio_in";
	};

        twi2_pins_a: twi2@0 {
                pins = "PE12", "PE13";
                function = "twi2";
                drive-strength = <10>;
        };

        twi2_pins_b: twi2@1 {
                pins = "PE12", "PE13";
                function = "gpio_in";
        };

	twi3_pins_a: twi3@0 {
		pins = "PE6", "PE7";
		function = "twi3";
		drive-strength = <10>;
	};

	twi3_pins_b: twi3@1 {
		pins = "PE6", "PE7";
		function = "gpio_in";
	};

	gmac_pins_a: gmac@0 {
		pins = "PE0", "PE1", "PE2", "PE3",
		       "PE4", "PE5", "PE6", "PE7",
		       "PE8", "PE9", "PE10", "PE11",
		       "PE12", "PE13", "PE14", "PE15";
		function = "gmac0";
		drive-strength = <10>;
	};

	gmac_pins_b: gmac@1 {
		pins = "PE0", "PE1", "PE2", "PE3",
		       "PE4", "PE5", "PE6", "PE7",
		       "PE8", "PE9", "PE10", "PE11",
		       "PE12", "PE13", "PE14", "PE15";
		function = "gpio_in";
	};

	dmic_pins_a: dmic@0 {
		/* DMIC_PIN: CLK, DATA0, DATA1, DATA2, DATA3*/
		pins = "PB12", "PB11", "PB10", "PE14", "PB8";
		function = "dmic";
		drive-strength = <20>;
		bias-disable;
	};

	dmic_pins_b: dmic@1 {
		pins = "PB12", "PB11", "PB10", "PE14", "PB8";
		function = "io_disabled";
		drive-strength = <20>;
		bias-disable;
	};

	daudio0_pins_a: daudio0@0 {
		pins = "PE17", "PE16", "PE15", "PE14", "PE13";
		function = "i2s0";
		drive-strength = <20>;
		bias-disable;
	};

	daudio0_pins_b: daudio0_sleep@0 {
		pins = "PE17", "PE16", "PE15", "PE14", "PE13";
		function = "io_disabled";
		drive-strength = <20>;
		bias-disable;
	};

	daudio1_pins_a: daudio1@0 {
		pins = "PG11", "PG12", "PG13", "PG14", "PG15";
		function = "i2s1";
		drive-strength = <20>;
		bias-disable;
	};

	daudio1_pins_b: daudio1_sleep@0 {
		pins = "PG11", "PG12", "PG13", "PG14", "PG15";
		function = "io_disabled";
		drive-strength = <20>;
		bias-disable;
	};

	daudio2_pins_a: daudio2@0 {
		/* I2S_PIN: MCLK, BCLK, LRCK */
		pins = "PF6", "PF3", "PF5";
		function = "i2s2";
		drive-strength = <20>;
		bias-disable;
	};

	daudio2_pins_b: daudio2@1 {
		/* I2S_PIN: DOUT0 */
		pins = "PF1";
		function = "i2s2_dout";
		drive-strength = <20>;
		bias-disable;
	};

	daudio2_pins_c: daudio2@2 {
		/* I2S_PIN: DIN0 */
		pins = "PF0";
		function = "i2s2_din";
		drive-strength = <20>;
		bias-disable;
	};

	daudio2_pins_d: daudio2_sleep@0 {
		pins = "PF6", "PF3", "PF5", "PF1", "PF0";
		function = "io_disabled";
		drive-strength = <20>;
		bias-disable;
	};

	spdif_pins_a: spdif@0 {
		/* SPDIF_PIN: SPDIF_OUT */
		pins = "PG18";
		function = "spdif";
		drive-strength = <20>;
		bias-disable;
	};

	spdif_pins_b: spdif_sleep@0 {
		pins = "PG18";
		function = "io_disabled";
		drive-strength = <20>;
		bias-disable;
	};

	spi0_pins_a: spi0@0 {
		pins = "PC2", "PC4", "PC5"; /* clk, mosi, miso */
		function = "spi0";
		muxsel = <2>;
		drive-strength = <10>;
	};

	spi0_pins_b: spi0@1 {
		pins = "PC3", "PC7", "PC6";
		function = "spi0";
		muxsel = <2>;
		drive-strength = <10>;
		bias-pull-up;   /* cs, hold, wp should be pulled up */
	};

	spi0_pins_c: spi0@2 {
		pins = "PC2", "PC3", "PC4", "PC5","PC6", "PC7";
		function = "gpio_in";
		muxsel = <0>;
		drive-strength = <10>;
	};

	spi1_pins_a: spi1@0 {
		pins = "PD11", "PD12", "PD13"; /* clk, mosi, miso */
		function = "spi1";
		drive-strength = <10>;
	};

	spi1_pins_b: spi1@1 {
		pins = "PD10", "PD14", "PD15";
		function = "spi1";
		drive-strength = <10>;
		bias-pull-up;   /* cs, hold, wp should be pulled up */
	};

	spi1_pins_c: spi1@2 {
		pins = "PD10", "PD11", "PD12", "PD13","PD14", "PD15";
		function = "gpio_in";
		drive-strength = <10>;
	};

	ledc_pins_a: ledc@0 {
		pins = "PC0";
		function = "ledc";
		drive-strength = <10>;
	};

	ledc_pins_b: ledc@1 {
		pins = "PC0";
		function = "gpio_in";
	};

	pwm0_pin_a: pwm0@0 {
		pins = "PD16";
		function = "pwm0";
		drive-strength = <10>;
		bias-pull-up;
	};

	pwm0_pin_b: pwm0@1 {
		pins = "PD16";
		function = "gpio_in";
		bias-disable;
	};

	pwm2_pin_a: pwm2@0 {
		pins = "PD18";
		function = "pwm2";
		drive-strength = <10>;
		bias-pull-up;
	};

	pwm2_pin_b: pwm2@1 {
		pins = "PD18";
		function = "gpio_out";
	};

	pwm7_pin_a: pwm7@0 {
		pins = "PD22";
		function = "pwm7";
		drive-strength = <10>;
		bias-pull-up;
	};

	pwm7_pin_b: pwm7@1 {
		pins = "PD22";
		function = "gpio_in";
	};


	s_cir0_pins_a: s_cir@0 {
		pins = "PB7";
		function = "ir";
		drive-strength = <10>;
		bias-pull-up;
	};

	s_cir0_pins_b: s_cir@1 {
		pins = "PB7";
		function = "gpio_in";
	};

	ir1_pins_a: ir1@0 {
		pins = "PB0";
		function = "ir";
		drive-strength = <10>;
		bias-pull-up;
	};

	ir1_pins_b: ir1@1 {
		pins = "PB0";
		function = "gpio_in";
	};
};

&uart0 {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart0_pins_a>;
	pinctrl-1 = <&uart0_pins_b>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart1_pins_a>;
	pinctrl-1 = <&uart1_pins_b>;
	status = "disabled";
};

&uart2 {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart2_pins_a>;
	pinctrl-1 = <&uart2_pins_b>;
	status = "disabled";
};

&uart3 {
	compatible = "allwinner,sun20iw1-dsp-uart";
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&uart3_pins_a>;
	pinctrl-1 = <&uart3_pins_a>;
	status = "disabled";
};

&soc {
	card0_boot_para@2 {
		/*
		 * Avoid dtc compiling warnings.
		 * @TODO: Developer should modify this to the actual value
		 */
		reg = <0x0 0x2 0x0 0x0>;
		device_type = "card0_boot_para";
		card_ctrl = <0x0>;
		card_high_speed = <0x1>;
		card_line = <0x4>;
		pinctrl-0 = <&sdc0_pins_a>;
	};

	card2_boot_para@3 {
		/*
		 * Avoid dtc compiling warnings.
		 * @TODO: Developer should modify this to the actual value
		 */
		reg = <0x0 0x3 0x0 0x0>;
		device_type = "card2_boot_para";
		card_ctrl = <0x2>;
		card_high_speed = <0x1>;
		card_line = <0x4>;
		pinctrl-0 = <&sdc2_pins_a>;
		/*pinctrl-0 = <&sdc0_pins_a>;*/
		/*sdc_ex_dly_used = <0x2>;*/
		sdc_io_1v8 = <0x1>;
		/*sdc_type = "tm4";*/
		sdc_tm4_hs200_max_freq = <150>;
		sdc_tm4_hs400_max_freq = <100>;
		sdc_ex_dly_used = <2>;
		/*sdc_tm4_win_th = <8>;*/
		/*sdc_dis_host_caps = <0x180>;*/
	};

	rfkill: rfkill@0 {
		compatible    = "allwinner,sunxi-rfkill";
		chip_en;
		power_en;
		pinctrl-0 = <&wlan_pins_a>;
		pinctrl-names = "default";
		status        = "okay";

		wlan: wlan@0 {
			compatible    = "allwinner,sunxi-wlan";
			clock-names = "32k-fanout1";
			clocks = <&ccu CLK_FANOUT1_OUT>;
			wlan_busnum    = <0x1>;
			wlan_regon    = <&pio PG 12 GPIO_ACTIVE_HIGH>;
			wlan_hostwake  = <&pio PG 10 GPIO_ACTIVE_HIGH>;
			/*wlan_power    = "VCC-3V3";*/
			/*wlan_power_vol = <3300000>;*/
			/*interrupt-parent = <&pio>;
			interrupts = < PG 10 IRQ_TYPE_LEVEL_HIGH>;*/
			wakeup-source;

		};
		
		bt: bt@0 {
			compatible    = "allwinner,sunxi-bt";
			clock-names = "32k-fanout1";
			clocks = <&ccu CLK_FANOUT1_OUT>;
			/*bt_power_num = <0x01>;*/
			/*bt_power      = "axp803-dldo1";*/
			/*bt_io_regulator = "axp803-dldo1";*/
			/*bt_io_vol = <3300000>;*/
			/*bt_power_vol = <330000>;*/
			bt_rst_n      = <&pio PG 18 GPIO_ACTIVE_LOW>;
			status        = "disabled";
		};
	};

	btlpm: btlpm@0 {
		compatible  = "allwinner,sunxi-btlpm";
		uart_index  = <0x1>;
		bt_wake     = <&pio PG 14 GPIO_ACTIVE_HIGH>;
		bt_hostwake = <&pio PG 13 GPIO_ACTIVE_HIGH>;
		status      = "disabled";
	};

	addr_mgt: addr_mgt@0 {
		compatible     = "allwinner,sunxi-addr_mgt";
		type_addr_wifi = <0x0>;
		type_addr_bt   = <0x0>;
		type_addr_eth  = <0x0>;
		status         = "okay";
	};
};

&sdc2 {
	non-removable;
	bus-width = <4>;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	no-sdio;
	no-sd;
	ctl-spec-caps = <0x308>;
	cap-mmc-highspeed;
	sunxi-power-save-mode;
	sunxi-dis-signal-vol-sw;
	mmc-bootpart-noacc;
	max-frequency = <150000000>;
	/*vmmc-supply = <&reg_dcdc1>;*/
	/*emmc io vol 3.3v*/
	/*vqmmc-supply = <&reg_aldo1>;*/
	/*emmc io vol 1.8v*/
	/*vqmmc-supply = <&reg_eldo1>;*/
	status = "disabled";
};

&sdc0 {
	bus-width = <4>;
	cd-gpios = <&pio PF 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* mangopi */
	/*non-removable;*/
	/*broken-cd;*/
	/*cd-inverted;*/
	/*data3-detect;*/
	/*card-pwr-gpios = <&pio PH 14 1 1 2 0xffffffff>;*/
	/*cd-used-24M;*/
	cap-sd-highspeed;
	/*sd-uhs-sdr50;*/
	/*sd-uhs-ddr50;*/
	/*sd-uhs-sdr104;*/
	no-sdio;
	no-mmc;
	sunxi-power-save-mode;
	/*sunxi-dis-signal-vol-sw;*/
	max-frequency = <150000000>;
	ctl-spec-caps = <0x8>;
	/*vmmc-supply = <&reg_dcdc1>;*/
	/*vqmmc33sw-supply = <&reg_dcdc1>;*/
	/*vdmmc33sw-supply = <&reg_dcdc1>;*/
	/*vqmmc18sw-supply = <&reg_eldo1>;*/
	/*vdmmc18sw-supply = <&reg_eldo1>;*/
	status = "okay";
};

&sdc1 {
	bus-width = <4>;
	no-mmc;
	no-sd;
	cap-sd-highspeed;
	/*sd-uhs-sdr12*/
	/*sd-uhs-sdr25;*/
	/*sd-uhs-sdr50;*/
	/*sd-uhs-ddr50;*/
	/*sd-uhs-sdr104;*/
	/*sunxi-power-save-mode;*/
	/*sunxi-dis-signal-vol-sw;*/
	cap-sdio-irq;
	keep-power-in-suspend;
	ignore-pm-notify;
	max-frequency = <150000000>;
	ctl-spec-caps = <0x8>;
	status = "okay";
};


/*
tvd configuration
used                   (create device, 0: do not create device, 1: create device)
agc_auto_enable        (0: agc manual mode,agc_manual_value is valid; 1: agc auto mode)
agc_manual_value       (agc manual value, default value is 64)
cagc_enable            (cagc        0: disable, 1: enable)
fliter_used            (3d fliter   0: disable, 1: enable)
support two PMU power  (tvd_power0, tvd_power1)
support two GPIO power (tvd_gpio0, tvd_gpio1)
NOTICE: If tvd need pmu power or gpio power,params need be configured under [tvd]
tvd_sw                 (the switch of all tvd driver.)
tvd_interface          (0: cvbs, 1: ypbpr,)
tvd_format             (0:TVD_PL_YUV420 , 1: MB_YUV420, 2: TVD_PL_YUV422)
tvd_system             (0:ntsc, 1:pal)
tvd_row                (total row number in multi channel mode 1-2)
tvd_column             (total column number in multi channel mode 1-2)
tvd_channelx_en        (0:disable, 1~4:position in multi channel mode,In single channel
                       mode,mean enable)
tvd_row*tvd_column is the total tvd channel number to be used in multichannel mode
+--------------------+--------------------+
|                    |                    |
|                    |                    |
|         1          |         2          |
|                    |                    |
|                    |                    |
+--------------------+--------------------+
|                    |                    |
|                    |                    |
|         3          |         4          |
|                    |                    |
|                    |                    |
+--------------------+--------------------+
*/

&tvd {
	tvd_sw          = <1>;
	tvd_interface   = <0>;
	tvd_format      = <0>;
	tvd_system      = <1>;
	tvd_row         = <1>;
	tvd_column      = <1>;
	tvd_channel0_en = <1>;
	tvd_channel1_en = <0>;
	tvd_channel2_en = <0>;
	tvd_channel3_en = <0>;
	/*tvd_gpio0 = <&pio PD 22 GPIO_ACTIVE_HIGH>;*/
	/*tvd_gpio1 = <&pio PD 23 GPIO_ACTIVE_HIGH>;*/
	/*tvd_gpio2 = <&pio PD 24 GPIO_ACTIVE_HIGH>;*/
	/*	dc1sw-supply = <&reg_dc1sw>;*/
	/*	eldo3-supply = <&reg_eldo3>;*/
	/*tvd_power0      = "dc1sw"*/
	/*tvd_power1      = "eldo3"*/
};

&tvd0 {
	used                    = <1>;
	agc_auto_enable         = <1>;
	agc_manual_value        = <64>;
	cagc_enable             = <1>;
	fliter_used             = <1>;
};

/* Audio Driver modules */
&sunxi_rpaf_dsp0 {
	status = "disabled";
};

/* if audiocodec is used, sdc0 and uart0 should be closed to enable PA. */
&codec {
	/* MIC and headphone gain setting */
	mic1gain 	= <0x1F>;
	mic2gain 	= <0x1F>;
	mic3gain 	= <0x1F>;
	/* ADC/DAC DRC/HPF func enabled */
        /* 0x1:DAP_HP_EN; 0x2:DAP_SPK_EN; 0x3:DAP_HPSPK_EN */
	adcdrc_cfg 	= <0x0>;
	adchpf_cfg 	= <0x1>;
	dacdrc_cfg 	= <0x0>;
	dachpf_cfg 	= <0x0>;
	/* Volume about */
	digital_vol 	= <0x00>;
	lineout_vol 	= <0x1a>;
	headphonegain	= <0x03>;
	/* Pa enabled about */
	pa_level 	= <0x01>;
	pa_pwr_level 	= <0x01>;
	pa_msleep_time 	= <0x78>;
	/* gpio-spk	= <&pio PF 2 GPIO_ACTIVE_HIGH>;*/
	/* gpio-spk-pwr	= <&pio PF 4 GPIO_ACTIVE_HIGH>; */
	/* CMA config about */
	playback_cma	= <128>;
	capture_cma	= <256>;
	/* regulator about */
	/* avcc-supply	= <&reg_aldo1>; */
	/* hpvcc-supply	= <&reg_eldo1>; */
	status = "okay";
};

&sndcodec {
	hp_detect_case	= <0x00>;
	jack_enable	= <0x01>;
	status = "okay";
};

&dummy_cpudai {
	status = "okay";
};

&dmic {
	pinctrl-names   = "default","sleep";
	pinctrl-0       = <&dmic_pins_a>;
	pinctrl-1       = <&dmic_pins_b>;
	status = "disabled";
};

&dmic_codec {
	status = "okay";
};

&sounddmic {
	status = "okay";
};

/*-----------------------------------------------------------------------------
 * pcm_lrck_period	16/32/64/128/256
 * slot_width_select	16bits/20bits/24bits/32bits
 * frametype		0 --> short frame = 1 clock width;
 *			1 --> long frame = 2 clock width;
 * tdm_config		0 --> pcm
 *			1 --> i2s
 * mclk_div		0 --> not output
 *			1/2/4/6/8/12/16/24/32/48/64/96/128/176/192
 *			(set mclk as external codec clk source, freq is pll_audio/mclk_div)
 * pinctrl_used		0 --> I2S/PCM use for internal
 *			1 --> I2S/PCM use for external audio
 * daudio_type:		0 --> external audio type
 *---------------------------------------------------------------------------*/
&daudio0 {
	mclk_div 	= <0x01>;
	frametype 	= <0x00>;
	tdm_config 	= <0x01>;
	sign_extend 	= <0x00>;
	msb_lsb_first 	= <0x00>;
	pcm_lrck_period = <0x80>;
	slot_width_select = <0x20>;
	pinctrl-names   = "default", "sleep";
	pinctrl-0       = <&daudio0_pins_a>;
	pinctrl-1       = <&daudio0_pins_b>;
	pinctrl_used	= <0x0>;
	status = "disabled";
};

/*-----------------------------------------------------------------------------
 * simple-audio-card,name	name of sound card, e.g.
 *				"snddaudio0" --> use for external audio
 * sound-dai			"snd-soc-dummy" --> use for I2S
 *				"ac108" --> use for external audio of ac108
 *---------------------------------------------------------------------------*/
&sounddaudio0 {
	/* simple-audio-card,format = "i2s"; */
	/* simple-audio-card,frame-master = <&daudio0_master>; */
	/* simple-audio-card,bitclock-master = <&daudio0_master>; */
	/* simple-audio-card,bitclock-inversion; */
	/* simple-audio-card,frame-inversion; */
	status = "disabled";
	daudio0_master: simple-audio-card,codec {
		/* sound-dai = <&ac108>; */
	};
};

&daudio1 {
	mclk_div 	= <0x01>;
	frametype 	= <0x00>;
	tdm_config 	= <0x01>;
	sign_extend 	= <0x00>;
	msb_lsb_first 	= <0x00>;
	pcm_lrck_period = <0x80>;
	slot_width_select = <0x20>;
	pinctrl-names   = "default", "sleep";
	pinctrl-0       = <&daudio1_pins_a>;
	pinctrl-1       = <&daudio1_pins_b>;
	pinctrl_used	= <0x0>;
	status = "disabled";
};

&sounddaudio1 {
	status = "disabled";
	daudio1_master: simple-audio-card,codec {
		/* sound-dai = <&ac108>; */
	};
};

&daudio2 {
	mclk_div 	= <0x01>;
	frametype 	= <0x00>;
	tdm_config 	= <0x01>;
	sign_extend 	= <0x00>;
	tx_data_mode 	= <0x00>;
	rx_data_mode 	= <0x00>;
	msb_lsb_first 	= <0x00>;
	pcm_lrck_period = <0x80>;
	slot_width_select = <0x20>;
	asrc_function_en  = <0x00>;
	pinctrl-names   = "default", "sleep";
	pinctrl-0       = <&daudio2_pins_a &daudio2_pins_b &daudio2_pins_c>;
	pinctrl-1       = <&daudio2_pins_d>;
	pinctrl_used	= <0x1>;
	daudio_type	= <0x0>;
	status = "disabled";
};

&sounddaudio2 {
	status = "disabled"; /* mangopi */
	daudio2_master: simple-audio-card,codec {
		/* sound-dai = <&ac108>; */
	};
};

&spdif {
	pinctrl-names   = "default","sleep";
	pinctrl-0       = <&spdif_pins_a>;
	pinctrl-1       = <&spdif_pins_b>;
	status = "okay";
};

&soundspdif {
	status = "okay";
};

/*
 *usb_port_type: usb mode. 0-device, 1-host, 2-otg.
 *usb_detect_type: usb hotplug detect mode. 0-none, 1-vbus/id detect, 2-id/dpdm detect.
 *usb_detect_mode: 0-thread scan, 1-id gpio interrupt.
 *usb_id_gpio: gpio for id detect.
 *usb_det_vbus_gpio: gpio for id detect. gpio or "axp_ctrl";
 *usb_wakeup_suspend：0-SUPER_STANDBY, 1-USB_STANDBY.
 */
&usbc0 {
	device_type = "usbc0";
	usb_port_type = <0x0>;
	usb_detect_type = <0x0>;
/*	usb_detect_mode = <0>;
	usb_id_gpio = <&pio PB 8 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	usb_det_vbus_gpio = <&pio PB 9 GPIO_ACTIVE_HIGH>; */
	usb_wakeup_suspend = <0>;
	usb_serial_unique = <0>;
	usb_serial_number = "20080411";
	rndis_wceis = <1>;
	status = "okay";
};

&ehci0 {
	drvvbus-supply = <&reg_usb1_vbus>;
};

&ohci0 {
	drvvbus-supply = <&reg_usb1_vbus>;
};

&usbc1 {
	device_type = "usbc1";
    usb_port_type = <0x01>;
    usb_detect_type = <0x1>;	
	usb_regulator_io = "nocare";
	usb_wakeup_suspend = <0>;
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&twi0 {
	clock-frequency = <400000>;
	pinctrl-0 = <&twi0_pins_a>;
	pinctrl-1 = <&twi0_pins_b>;
	pinctrl-names = "default", "sleep";
	status = "disabled";

	eeprom@50 {
		compatible = "atmel,24c16";
		reg = <0x50>;
		status = "disabled";
	};
};

&twi1 {
	clock-frequency = <400000>;
	pinctrl-0 = <&twi1_pins_a>;
	pinctrl-1 = <&twi1_pins_b>;
	pinctrl-names = "default", "sleep";
	status = "disabled";
};

&twi2 {
	clock-frequency = <400000>;
	pinctrl-0 = <&twi2_pins_a>;
	pinctrl-1 = <&twi2_pins_b>;
	pinctrl-names = "default", "sleep";
	dmas = <&dma 45>, <&dma 45>;
	dma-names = "tx", "rx";
	status = "okay";

	/* pcf8574-usage:
	 * only use gpio0~7, 0 means PP0.
	 * pin set:
	 * gpios = <&pcf8574 0 GPIO_ACTIVE_LOW>;
	 * interrupt set:
	 * interrupt-parent = <&pcf8574>;
	 * interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
	 */
	pcf8574: gpio@38 {
		compatible = "nxp,pcf8574";
		reg = <0x38>;
		gpio_base = <2020>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&pio>;
		interrupts = <PB 2 IRQ_TYPE_EDGE_FALLING>;
		status = "disabled";
	};

	ctp@14 {
                compatible = "allwinner,goodix";
                device_type = "ctp";
                reg = <0x14>;
                status = "okay";
                ctp_name = "gt9xxnew_ts";
                ctp_twi_id = <0x2>;
                ctp_twi_addr = <0x14>;
                ctp_screen_max_x = <0x320>;
                ctp_screen_max_y = <0x1e0>;
                ctp_revert_x_flag = <0x0>;
                ctp_revert_y_flag = <0x0>;
                ctp_exchange_x_y_flag = <0x0>;
                ctp_int_port = <&pio PB 3 GPIO_ACTIVE_HIGH>;
                ctp_wakeup = <&pio PB 2 GPIO_ACTIVE_HIGH>;
                /*ctp-supply = <&reg_aldo2>;*/
                /*ctp_power_ldo = <&reg_aldo2>;*/
                /*ctp_power_ldo_vol = <3300>;*/
	};
};

&twi3 {
	clock-frequency = <400000>;
	pinctrl-0 = <&twi3_pins_a>;
	pinctrl-1 = <&twi3_pins_b>;
	pinctrl-names = "default", "sleep";
	status = "disabled";
};

&gmac0 {
	phy-mode = "rgmii";
	use_ephy25m = <1>;
	pinctrl-0 = <&gmac_pins_a>;
	pinctrl-1 = <&gmac_pins_b>;
	pinctrl-names = "default", "sleep";
	phy-rst = <&pio PE 16 GPIO_ACTIVE_HIGH>;
	tx-delay = <3>; /*2~4*/
	rx-delay = <0>;
	status = "disabled";
};

&spi0 {
	clock-frequency = <100000000>;
	pinctrl-0 = <&spi0_pins_a &spi0_pins_b>;
	pinctrl-1 = <&spi0_pins_c>;
	pinctrl-names = "default", "sleep";
	/*spi-supply = <&reg_dcdc1>;*/
	spi_slave_mode = <0>;
	spi0_cs_number = <1>;
    spi0_cs_bitmap = <1>;
	status = "okay";

	spi-nand@0 {
		compatible = "spi-nand";
		spi-max-frequency=<100000000>;
		reg = <0x0>;
		spi-rx-bus-width=<0x01>;
		spi-tx-bus-width=<0x01>;
		status="okay";
	};

	spi-nor@0 {
		compatible = "jedec,spi-nor";
		spi-max-frequency=<30000000>;
		reg = <0x0>;
		spi-rx-bus-width=<0x01>;
		spi-tx-bus-width=<0x01>;
		status="disabled";
	};
};

&spi1 {
	clock-frequency = <100000000>;
	pinctrl-0 = <&spi1_pins_a &spi1_pins_b>;
	pinctrl-1 = <&spi1_pins_c>;
	pinctrl-names = "default", "sleep";
	spi_slave_mode = <0>;
	status = "disabled";

	spi_board1@0 {
		device_type = "spi_board1";
		compatible = "rohm,dh2228fv";
		spi-max-frequency = <0x5f5e100>;
		reg = <0x0>;
		spi-rx-bus-width = <0x4>;
		spi-tx-bus-width = <0x4>;
		status = "disabled";
	};
};

&ledc {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&ledc_pins_a>;
	pinctrl-1 = <&ledc_pins_b>;
	led_count = <12>;
	output_mode = "GRB";
	reset_ns = <84>;
	t1h_ns = <800>;
	t1l_ns = <320>;
	t0h_ns = <300>;
	t0l_ns = <800>;
	wait_time0_ns = <84>;
	wait_time1_ns = <84>;
	wait_data_time_ns = <600000>;
	status	= "disabled";
};

&keyboard0 {
	key0 = <210 0x160>;
	wakeup-source;
	status = "disabled";
};

/*----------------------------------------------------------------------------------
disp init configuration

disp_mode             (0:screen0<screen0,fb0>)
screenx_output_type   (0:none; 1:lcd; 2:tv; 5:vdpo)
fbx format            (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
fbx pixel sequence    (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
fb0_scaler_mode_enable(scaler mode enable, used FE)
fbx_width,fbx_height  (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
lcdx_backlight        (lcd init backlight,the range:[0,256],default:197
lcdx_yy               (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
lcd0_contrast         (LCD contrast, 0~100)
lcd0_saturation       (LCD saturation, 0~100)
lcd0_hue              (LCD hue, 0~100)
framebuffer software rotation setting:
disp_rotation_used:   (0:disable; 1:enable,you must set fbX_width to lcd_y,
set fbX_height to lcd_x)
degreeX:              (X:screen index; 0:0 degree; 1:90 degree; 3:270 degree)
degreeX_Y:            (X:screen index; Y:layer index 0~15; 0:0 degree; 1:90 degree; 3:270 degree)
devX_output_type : config output type in bootGUI framework in UBOOT-2018.
				   (0:none; 1:lcd; 2:tv;)
devX_output_mode : config output resolution(see include/video/sunxi_display2.h) of bootGUI framework in UBOOT-2018
devX_screen_id   : config display index of bootGUI framework in UBOOT-2018
devX_do_hpd      : whether do hpd detectation or not in UBOOT-2018
chn_cfg_mode     : Hardware DE channel allocation config. 0:single display with 6
				   channel, 1:dual display with 4 channel in main display and 2 channel in second
                   display, 2:dual display with 3 channel in main display and 3 channel in second
                   in display.
----------------------------------------------------------------------------------*/
&disp {
	disp_init_enable         = <1>;
	disp_mode                = <0>;

	screen0_output_type      = <1>;
	screen0_output_mode      = <4>;

	screen1_output_type      = <3>;
	screen1_output_mode      = <4>;
	
	screen1_output_format    = <0>;
	screen1_output_bits      = <0>;
	screen1_output_eotf      = <4>;
	screen1_output_cs        = <257>;
	screen1_output_range     = <2>;
	screen1_output_scan      = <0>;
	screen1_output_aspect_ratio = <8>;
	dev0_output_type         = <1>;
	dev0_output_mode         = <4>;
	dev0_screen_id           = <0>;
	dev0_do_hpd              = <0>;

	dev1_output_type         = <4>;
	dev1_output_mode         = <10>;
	dev1_screen_id           = <1>;
	dev1_do_hpd              = <1>;

	def_output_dev           = <0>;
	disp_rotation_used		 = <1>;
	degree0					 = <0>;
	fb0_format               = <0>;
	fb0_buffer_num           = <1>;	
	/*fb0_width                = <800>;*/
	/*fb0_height               = <480>;*/  /*read from lcd*/
	fb1_format               = <0>;
	fb1_width                = <0>;
	fb1_height               = <0>;
	chn_cfg_mode             = <1>;

	disp_para_zone           = <1>;
	/*VCC-LCD*/
/*	dc1sw-supply = <&reg_dc1sw>;*/
	/*VCC-DSI*/
/*	eldo3-supply = <&reg_eldo3>;*/
	/*VCC-PD*/
/*	dcdc1-supply = <&reg_dcdc1>;*/
};

/*----------------------------------------------------------------------------------
;lcd0 configuration

;lcd_if:               0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
;lcd_hv_if             0:Parallel RGB; 8:Serial RGB; 10:Dummy RGB; 11: RGB Dummy;12:CCIR656
;lcd_hv_clk_phase      0:0 degree;1:90 degree;2:180 degree;3:270 degree
;lcd_hv_sync_polarity  0:vs low,hs low; 1:vs high,hslow; 2:vs low,hs high; 3:vs high,hs high
;lcd_hv_syuv_seq       0:YUYV; 1:YVYU; 2:UYVY; 3:VYUY
;lcd_cpu_if            0:18bit/1 cycle parallel(RGB666); 4:16bit/1cycle parallel (RGB565)
;                      6:18bit/3 cycle parallel(RGB666); 7:16bit/2cycle parallel (RGB565)
;lcd_cpu_te            0:frame auto trigger; 1:frame triggered by te rising edge; 2:frame triggered by te falling edge;
;lcd_dsi_if            0:video mode; 1: Command mode; 2:video burst mode
;lcd_dsi_te            0:frame auto trigger; 1:frame triggered by te rising edge; 2:frame triggered by te falling edge;
;lcd_x:                lcd horizontal resolution
;lcd_y:                lcd vertical resolution
;lcd_width:            width of lcd in mm
;lcd_height:           height of lcd in mm
;lcd_dclk_freq:        in MHZ unit
;lcd_pwm_freq:         in HZ unit
;lcd_pwm_pol:          lcd backlight PWM polarity
;lcd_pwm_max_limit     lcd backlight PWM max limit(<=255)
;lcd_hbp:              hsync back porch(pixel) + hsync plus width(pixel);
;lcd_ht:               hsync total cycle(pixel)
;lcd_vbp:              vsync back porch(line) + vysnc plus width(line)
;lcd_vt:               vysnc total cycle(line)
;lcd_hspw:             hsync plus width(pixel)
;lcd_vspw:             vysnc plus width(pixel)
;lcd_lvds_if:          0:single link;  1:dual link
;lcd_lvds_colordepth:  0:8bit; 1:6bit
;lcd_lvds_mode:        0:NS mode; 1:JEIDA mode
;lcd_frm:              0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_io_phase:         0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
;                      8~11bit:dclk phase; 12~15bit:de phase)
;lcd_gamma_en          lcd gamma correction enable
;lcd_bright_curve_en   lcd bright curve correction enable
;lcd_cmap_en           lcd color map function enable
;deu_mode              0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep:         Smart Backlight parameter, lcd gamma vale * 10;
;                      decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color           90:normal lcd screen 65:retina lcd screen(9.7inch)
;Pin setting for special function ie.LVDS, RGB data or vsync
;   name(donot care) = port:PD12<pin function><pull up or pull down><drive ability><output level>
;Pin setting for gpio:
;   lcd_gpio_X     = port:PD12<pin function><pull up or pull down><drive ability><output level>
;Pin setting for backlight enable pin
;   lcd_bl_en     = port:PD12<pin function><pull up or pull down><drive ability><output level>
;fsync setting, pulse to csi
;lcd_fsync_en          (0:disable fsync,1:enable)
;lcd_fsync_act_time    (active time of fsync, unit:pixel)
;lcd_fsync_dis_time    (disactive time of fsync, unit:pixel)
;lcd_fsync_pol         (0:positive;1:negative)
;gpio config: <&pio for cpu or &r_pio for cpus, port, port num, pio function,
pull up or pull down(default 0), driver level(default 1), data>
;For dual link lvds: use lvds2link_pins_a  and lvds2link_pins_b instead
;For rgb24: use rgb24_pins_a  and rgb24_pins_b instead
;For lvds1: use lvds1_pins_a  and lvds1_pins_b instead
;For lvds0: use lvds0_pins_a  and lvds0_pins_b instead
;----------------------------------------------------------------------------------*/
/*
&lcd0 {
	lcd_used            = <0>;

	lcd_driver_name     = "tft08006";
	lcd_backlight       = <100>;
	lcd_if              = <4>;

	lcd_x               = <800>;
	lcd_y               = <1280>;
	lcd_width           = <52>;
	lcd_height          = <52>;
	lcd_dclk_freq       = <70>;

	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <2>;
	lcd_pwm_freq        = <1000>;
	lcd_pwm_pol         = <0>;
	lcd_pwm_max_limit   = <255>;

	lcd_hbp             = <32>;
	lcd_ht              = <868>;
	lcd_hspw            = <4>;
	lcd_vbp             = <12>;
	lcd_vt              = <1311>;
	lcd_vspw            = <4>;

	lcd_dsi_if          = <0>;
	lcd_dsi_lane        = <4>;
	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <0>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <0>;
	lcd_hv_clk_phase    = <0>;
	lcd_hv_sync_polarity= <0>;
	lcd_io_phase        = <0x0000>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;
	lcd_fsync_en        = <0>;
	lcd_fsync_act_time  = <1000>;
	lcd_fsync_dis_time  = <1000>;
	lcd_fsync_pol       = <0>;

	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	lcd_gpio_0 =  <&pio PG 13 GPIO_ACTIVE_HIGH>;
	pinctrl-0 = <&dsi4lane_pins_a>;
	pinctrl-1 = <&dsi4lane_pins_b>;
};
*/

&lcd0 {
	lcd_used            = <1>;

	lcd_driver_name     = "default_lcd";
	lcd_backlight       = <50>;
	lcd_if              = <0>;

	lcd_x               = <800>;
	lcd_y               = <480>;
	lcd_width           = <150>;
	lcd_height          = <94>;
	lcd_dclk_freq       = <48>;

	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <500>;
	lcd_pwm_pol         = <0>;

	lcd_hbp             = <55>;
	lcd_ht              = <1240>;
	lcd_hspw            = <20>;
	lcd_vbp             = <35>;
	lcd_vt              = <650>;
	lcd_vspw            = <10>;

	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <1>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <0>;
	lcd_io_phase        = <0x0000>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;

	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	pinctrl-0 = <&rgb18_pins_a>;
	pinctrl-1 = <&rgb18_pins_b>;
/*
	lcd_driver_name     = "default_lcd";
	lcd_backlight       = <150>;
	lcd_if              = <3>;

	lcd_x               = <1280>;
	lcd_y               = <800>;
	lcd_width           = <150>;
	lcd_height          = <94>;
	lcd_dclk_freq       = <71>;
	lcd_rb_swap			= <0>;
	
	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <50000>;
	lcd_pwm_pol         = <1>;
	lcd_pwm_max_limit   = <255>;

	lcd_hbp             = <20>;
	lcd_ht              = <1418>;
	lcd_hspw            = <10>;
	lcd_vbp             = <10>;
	lcd_vt              = <814>;
	lcd_vspw            = <5>;

	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <1>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <1>;
	lcd_io_phase        = <0x0000>;
	lcd_hv_clk_phase	= <0>;
	lcd_hv_sync_polarity = <0>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;
	lcd_fsync_act_time  = <1000>;
	lcd_fsync_dis_time  = <1000>;
	
	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	pinctrl-0 = <&lvds0_pins_a>;
	pinctrl-1 = <&lvds0_pins_b>;
	lcd_bl_en = <&pio PD 20 GPIO_ACTIVE_HIGH>;	

	lcd_driver_name     = "he0801a068";
	lcd_backlight       = <50>;
	lcd_if              = <4>;

	lcd_x               = <800>;
	lcd_y               = <1280>;
	lcd_width           = <52>;
	lcd_height          = <52>;
	lcd_dclk_freq       = <78>;

	lcd_pwm_used        = <1>;
	lcd_pwm_ch          = <7>;
	lcd_pwm_freq        = <50000>;
	lcd_pwm_pol         = <1>;
	lcd_pwm_max_limit   = <255>;

	lcd_hbp             = <149>;
	lcd_ht              = <978>;
	lcd_hspw            = <16>;
	lcd_vbp             = <7>;
	lcd_vt              = <1329>;
	lcd_vspw            = <5>;

	lcd_dsi_lane        = <4>;
	lcd_lvds_if         = <0>;
	lcd_lvds_colordepth = <1>;
	lcd_lvds_mode       = <0>;
	lcd_frm             = <0>;
	lcd_io_phase        = <0x0000>;
	lcd_gamma_en        = <0>;
	lcd_bright_curve_en = <0>;
	lcd_cmap_en         = <0>;
	lcd_fsync_act_time  = <1000>;
	lcd_fsync_dis_time  = <1000>;
	
	deu_mode            = <0>;
	lcdgamma4iep        = <22>;
	smart_color         = <90>;

	pinctrl-0 = <&dsi4lane_pins_a>;
	pinctrl-1 = <&dsi4lane_pins_b>;
	lcd_gpio_0 = <&pio PD 20 GPIO_ACTIVE_HIGH>;	
*/
};

&pwm0 {
	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&pwm0_pin_a>;
	pinctrl-1 = <&pwm0_pin_b>;
	status = "disabled";
};

&pwm2 {
	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&pwm2_pin_a>;
	pinctrl-1 = <&pwm2_pin_b>;
	status = "disabled";
};


&pwm7 {
	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&pwm7_pin_a>;
	pinctrl-1 = <&pwm7_pin_b>;
	status = "disabled";
};

&rtp {
	allwinner,tp-sensitive-adjust = <0xf>;
	allwinner,filter-type = <0x1>;
	allwinner,ts-attached;
	status = "disabled";
};

&tpadc {
	key_cnt = <5>;
	key1 = <420 115>;
	key2 = <870 114>;
	key3 = <1290 119>;
	key4 = <1630 373>;
	key5 = <1950 28>;
	status = "disabled";
};

&gpadc {
	channel_num = <1>;
	channel_select = <0x01>;
	channel_data_select = <0>;
	channel_compare_select = <0x01>;
	channel_cld_select = <0x01>;
	channel_chd_select = <0>;
	channel0_compare_lowdata = <1600000>;
	channel0_compare_higdata = <1200000>;
	channel1_compare_lowdata = <460000>;
	channel1_compare_higdata = <1200000>;
	key_cnt = <5>;
	key0_vol = <210>;
	key0_val = <0x19c>;
	key1_vol = <410>;
	key1_val = <0x197>;
	key2_vol = <590>;
	key2_val = <158>;
	key3_vol = <750>;
	key3_val = <28>;
	key4_vol = <880>;
	key4_val = <28>;
	status = "okay";
	wakeup-source;
};

&s_cir0 {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&s_cir0_pins_a>;
	pinctrl-1 = <&s_cir0_pins_b>;
	ir_protocol_used		= <0>;
	ir_addr_code0			= <0x0>;
	status = "disabled";
};

&ir1 {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&ir1_pins_a>;
	pinctrl-1 = <&ir1_pins_b>;
	status = "disabled";
};

sun8iw20p1.dtsi

/*
 * Allwinner Technology CO., Ltd. sun8iw20p1 platform
 *
 * modify base on juno.dts
 */
 /* optee used 7MB: SHM 2M: OS: 1M: TA:4M*/
/memreserve/ 0x41900000 0x00700000;

#include <dt-bindings/clock/sun8iw20-ccu.h>
#include <dt-bindings/clock/sun8iw20-r-ccu.h>
#include <dt-bindings/clock/sun8iw20-rtc.h>
#include <dt-bindings/reset/sun8iw20-ccu.h>
#include <dt-bindings/reset/sun8iw20-r-ccu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/sun4i-gpio.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/power/r528-power.h>

/ {
        model = "sun8iw20";
        compatible = "allwinner,sun8iw20p1";
        interrupt-parent = <&gic>;
        #address-cells = <2>;
        #size-cells = <2>;

        aliases {
                serial0 = &uart0;
                serial1 = &uart1;
                serial2 = &uart2;
                serial3 = &uart3;
                serial4 = &uart4;
                serial5 = &uart5;
                spi0 = &spi0;
                spi1 = &spi1;
                twi0 = &twi0;
                twi1 = &twi1;
                twi2 = &twi2;
                twi3 = &twi3;
                mmc0 = &sdc0;
                mmc2 = &sdc2;
                pwm = &pwm;
                pwm0 = &pwm0;
                pwm1 = &pwm1;
                pwm2 = &pwm2;
                pwm3 = &pwm3;
                pwm4 = &pwm4;
                pwm5 = &pwm5;
                pwm6 = &pwm6;
                pwm7 = &pwm7;
                ir0 = &s_cir0;
                ve0 = &ve;
                tv0 = &tv0;
                tvd = &tvd;
                tvd0 = &tvd0;
                share_space0 = &share_space0;
        };

        chosen {
                bootargs = "earlyprintk=sunxi-uart,0x2500000 loglevel=8 initcall_debug=0 console=ttyS0 init=/init";
                //bootargs = "loglevel=8 initcall_debug=0 console=ttyS0 init=/init";
                linux,initrd-start = <0x0 0x0>;
                linux,initrd-end = <0x0 0x0>;
        };

        firmware {
                optee {
                        compatible = "linaro,optee-tz";
                        method = "smc";
                };
        };

        cpus {
                enable-method = "allwinner,sun8iw20p1";
                #address-cells = <1>;
                #size-cells = <0>;

                cpu0: cpu@0 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a7","arm,armv7";
                        reg = <0x0>;
                        enable-method = "psci";
                        clocks = <&ccu CLK_CPUX>;
                        dynamic-power-coefficient = <156>;
                        cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
                        operating-points-v2 = <&cpu_opp_table>;
                        #cooling-cells = <2>;
                };

                cpu1: cpu@1 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a7","arm,armv7";
                        reg = <0x1>;
                        enable-method = "psci";
                        clocks = <&ccu CLK_CPUX>;
                        cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
                        operating-points-v2 = <&cpu_opp_table>;
                        #cooling-cells = <2>;
                };

                idle-states {
                        entry-method = "arm,psci";

                        CPU_SLEEP: cpu-sleep {
                                compatible = "arm,idle-state";
                                arm,psci-suspend-param = <0x0010000>;
                                entry-latency-us = <46>;
                                exit-latency-us = <59>;
                                min-residency-us = <3570>;
                                local-timer-stop;
                        };

                        CLUSTER_SLEEP: cluster-sleep {
                                compatible = "arm,idle-state";
                                arm,psci-suspend-param = <0x1010000>;
                                entry-latency-us = <47>;
                                exit-latency-us = <74>;
                                min-residency-us = <5000>;
                                local-timer-stop;
                        };
                };

        };

        psci {
                compatible = "arm,psci-1.0";
                method = "smc";
        };

        dump_reg: dump_reg@20000 {
                compatible = "allwinner,sunxi-dump-reg";
                reg = <0x0 0x00020000 0x0 0x0004>;
                /* 0x00020000: dump_reg test addr, 0x0004: dump_reg test size */
        };

        cpu_opp_table: cpu-opp-table {
                compatible = "allwinner,sun50i-operating-points";
                nvmem-cells = <&speedbin_efuse>, <&cpubin_efuse>;
                nvmem-cell-names = "speed", "bin";
                opp-shared;

                opp@480000000 {
                        opp-hz = /bits/ 64 <480000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <900000>;
                        opp-microvolt-a1 = <900000>;

                        opp-microvolt-b0 = <950000>;
                        opp-supported-hw = <0x3>;
                };

                opp@720000000 {
                        opp-hz = /bits/ 64 <720000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <900000>;
                        opp-microvolt-a1 = <900000>;

                        opp-microvolt-b0 = <950000>;
                        opp-supported-hw = <0x3>;
                };

                opp@912000000 {
                        opp-hz = /bits/ 64 <912000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <950000>;
                        opp-microvolt-a1 = <900000>;

                        opp-microvolt-b0 = <950000>;
                        opp-supported-hw = <0x3>;
                };

                opp@1008000000 {
                        opp-hz = /bits/ 64 <1008000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <1000000>;
                        opp-microvolt-a1 = <900000>;

                        opp-microvolt-b0 = <950000>;
                        opp-supported-hw = <0x3>;
                };

                opp@1104000000 {
                        opp-hz = /bits/ 64 <1104000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <1050000>;
                        opp-microvolt-a1 = <950000>;

                        opp-microvolt-b0 = <950000>;
                        opp-supported-hw = <0x3>;
                };

                opp@1200000000 {
                        opp-hz = /bits/ 64 <1200000000>;
                        clock-latency-ns = <244144>; /* 8 32k periods */
                        opp-microvolt-a0 = <1100000>;
                        opp-microvolt-a1 = <1000000>;

                        opp-supported-hw = <0x1>;
                };
        };


        dcxo24M: dcxo24M_clk {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                clock-frequency = <24000000>;
                clock-output-names = "dcxo24M";
        };

        rc_16m: rc16m_clk {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                clock-frequency = <16000000>;
                clock-accuracy = <300000000>;
                clock-output-names = "rc-16m";
        };

        ext_32k: ext32k_clk {
                #clock-cells = <0>;
                compatible = "fixed-clock";
                clock-frequency = <32768>;
                clock-output-names = "ext-32k";
        };

        dram: dram {
                compatible = "allwinner,dram";
                clocks = <&ccu CLK_PLL_DDR0>;
                clock-names = "pll_ddr";
        };

        memory@40000000 {
                device_type = "memory";
                reg = <0x00000000 0x40000000 0x00000000 0x20000000>;
        };

        share_space0: share_space@42100000 {
                #address-cells = <1>;
                #size-cells = <1>;
                deice_tpye = "share_space0";
                /* dsp write addr and len */
                /* arm write addr and len */
                /* dsp log addr and len */
                /* reserve */
                reg = < 0x42100000 0x00001000
                        0x42101000 0x00001000
                        0x42102000 0x0000E000
                        0x00000000 0x00000000>;
        };

        gic: interrupt-controller@3020000 {
                compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
                #interrupt-cells = <3>;
                #address-cells = <0>;
                device_type = "gic";
                interrupt-controller;
                reg = <0x0 0x03021000 0 0x1000>, /* GIC Dist */
                      <0x0 0x03022000 0 0x2000>, /* GIC CPU */
                      <0x0 0x03024000 0 0x2000>, /* GIC VCPU Control */
                      <0x0 0x03026000 0 0x2000>; /* GIC VCPU */
                interrupts = <GIC_PPI 9 0xf04>; /* GIC Maintenence IRQ */
        };

        timer_arch {
                compatible = "arm,armv7-timer";
                interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
                             <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
                             <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
                             <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
                clock-frequency = <24000000>;
                arm,cpu-registers-not-fw-configured;
                interrupt-parent = <&gic>;
                arm,no-tick-in-suspend;
        };

        pmu {
                compatible = "arm,cortex-a7-pmu";
                interrupts = <GIC_SPI 172 4>,
                             <GIC_SPI 173 4>;
        };

        power: power-management@ff000000 {
                compatible = "allwinner,r528-pmu", "syscon", "simple-mfd";
                reg = <0x0 0x07001000 0x0 0x400>;

                pd: power-controller {
                        compatible = "allwinner,r528-power-controller";
                        clocks = <&r_ccu CLK_R_PPU>;
                        clock-names = "ppu";
                        resets = <&r_ccu RST_R_PPU>;
                        reset-names = "ppu_rst";
                        #power-domain-cells = <1>;
                        #address-cells = <1>;
                        #size-cells = <0>;

                        /* These power domains are grouped by VD_SYS */
                        pd_ve@R528_PD_VE {
                                reg = <R528_PD_VE>;
                        };
                };
        };

        mmu_aw: iommu@2010000 {
                compatible = "allwinner,sunxi-iommu";
                reg = <0x0 0x02010000 0x0 0x1000>;
                interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
                interrupt-names = "iommu-irq";
                clocks = <&ccu CLK_BUS_IOMMU>;
                clock-names = "iommu";
                #iommu-cells = <2>;
                status = "okay";
        };

        reg_pio1_8: pio-18 {
                compatible = "regulator-fixed";
                regulator-name = "pio-18";
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <1800000>;
        };

        reg_pio3_3: pio-33 {
                compatible = "regulator-fixed";
                regulator-name = "pio-33";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
        };

        thermal-zones {
                cpu_thermal_zone {
                        polling-delay-passive = <500>;
                        polling-delay = <1000>;
                        thermal-sensors = <&ths 0>;
                        sustainable-power = <589>;

                        cpu_trips: trips {
                                cpu_threshold: trip-point@0 {
                                        temperature = <70000>;
                                        type = "passive";
                                        hysteresis = <0>;
                                };
                                cpu_target: trip-point@1 {
                                        temperature = <90000>;
                                        type = "passive";
                                        hysteresis = <0>;
                                };
                                cpu_crit: cpu_crit@0 {
                                        temperature = <110000>;
                                        type = "critical";
                                        hysteresis = <0>;
                                };
                        };

                        cooling-maps {
                                map0 {
                                        trip = <&cpu_target>;
                                        cooling-device = <&cpu0
                                        THERMAL_NO_LIMIT
                                        THERMAL_NO_LIMIT>;
                                        contribution = <1024>;
                                };
                        };
                };
        };

        soc: soc@3000000 {
                compatible = "simple-bus";
                #address-cells = <2>;
                #size-cells = <2>;
                ranges;
                device_type = "soc";

                sram_ctrl: sram_ctrl@3000000 {
                        compatible = "allwinner,sram_ctrl";
                        reg = <0x0 0x3000000 0 0x16C>;
                        soc_ver {
                                offset = <0x24>;
                                mask = <0x7>;
                                shift = <0>;
                                ver_a = <0x18590000>;
                                ver_b = <0x18590002>;
                                ver_d = <0x18590003>;
                        };

                        soc_id {
                                offset = <0x200>;
                                mask = <0x1>;
                                shift = <22>;
                        };

                        soc_bin {
                                offset = <0x0>;
                                mask = <0x3ff>;
                                shift = <0x0>;
                        };

                };

                rtc_ccu: rtc_ccu@7090000 {
                        compatible = "allwinner,sun8iw20-rtc-ccu";
                        device_type = "rtc-ccu";
                        reg = <0x0 0x07090000 0x0 0x320>;  /* The same as rtc */
                        #clock-cells = <1>;
                };

                ccu: ccu@2001000 {
                        compatible = "allwinner,sun8iw20-ccu";
                        reg = <0x0 0x02001000 0x0 0x1000>;
                        clocks = <&dcxo24M>, <&rtc_ccu CLK_OSC32K>, <&rtc_ccu CLK_IOSC>;
                        clock-names = "hosc", "losc", "iosc";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                };

                r_ccu: r_ccu@7010000 {
                        compatible = "allwinner,sun8iw20-r-ccu";
                        reg = <0x0 0x07010000 0x0 0x240>;
                        clocks = <&dcxo24M>, <&rtc_ccu CLK_OSC32K>, <&rtc_ccu CLK_IOSC>,
                                 <&ccu CLK_PLL_PERIPH0>;
                        clock-names = "hosc", "losc", "iosc", "pll-periph0";
                        #clock-cells = <1>;
                        #reset-cells = <1>;
                };

                rtc: rtc@7090000 {
                        compatible = "allwinner,sun8iw20-rtc";
                        device_type = "rtc";
                        wakeup-source;
                        reg = <0x0 0x07090000 0x0 0x320>;
                        interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&r_ccu CLK_R_AHB_BUS_RTC>, <&rtc_ccu CLK_RTC_1K>, <&rtc_ccu CLK_RTC_SPI>;
                        clock-names = "r-ahb-rtc", "rtc-1k", "rtc-spi";
                        resets = <&r_ccu RST_R_AHB_BUS_RTC>;
                        gpr_cur_pos = <6>;
                };

                dma:dma-controller@3002000 {
                        compatible = "allwinner,sun8iw20-dma";
                        reg = <0x0 0x03002000 0x0 0x1000>;
                        interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
                        clock-names = "bus", "mbus";
                        dma-channels = <8>;
                        dma-requests = <48>;
                        resets = <&ccu RST_BUS_DMA>;
                        #dma-cells = <1>;
                };

                soc_timer0: timer@2050000 {
                        compatible = "allwinner,sun4i-a10-timer";
                        device_type = "soc_timer";
                        reg = <0x0 0x02050000 0x0 0xA0>;
                        interrupt-parent = <&gic>;
                        interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&dcxo24M>;
                };

                wdt: watchdog@20500A0 {
                        compatible = "allwinner,sun6i-a31-wdt";
                        reg = <0x0 0x020500A0 0x0 0x20>;  /* In Timers Spec */
                        interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;  /* In GIC Spec */
                };

                mbus0: mbus-controller@3102000 {
                        compatible = "allwinner,sun8i-mbus";
                        reg = <0x0 0x03102000 0x0 0x1000>;  /* In SDRAM Controller Spec: DRAMC Common Register */
                        #mbus-cells = <1>;
                };

                pio: pinctrl@2000000 {
                        compatible = "allwinner,sun8iw20-pinctrl";
                        reg = <0x0 0x02000000 0x0 0x500>;
                        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,  /* AW1859_GIC_Spec: GPIOB: 101-32=69 */
                                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
                        device_type = "pio";
                        clocks = <&ccu CLK_APB0>, <&dcxo24M>, <&rtc_ccu CLK_OSC32K>;
                        clock-names = "apb", "hosc", "losc";
                        gpio-controller;
                        #gpio-cells = <3>;
                        interrupt-controller;
                        #interrupt-cells = <3>;
                        #size-cells = <0>;
                        vcc-pf-supply = <&reg_pio1_8>;
                        vcc-pfo-supply = <&reg_pio3_3>;

                        test_pins_a: test_pins@0 {
                                allwinner,pins = "PB0", "PB1";
                                allwinner,function = "test";
                                allwinner,muxsel = <0x9>;
                                allwinner,drive = <1>;
                                allwinner,pull = <1>;
                        };
                        test_pins_b: test_pins@1 {
                                pins = "PB0", "PB1";
                                function = "io_disabled";
                                allwinner,muxsel = <0xF>;
                                allwinner,drive = <1>;
                                allwinner,pull = <1>;
                        };

                        csi_mclk0_pins_a: csi_mclk0@0 {
                                pins = "PE3";
                                function = "csi0";
                                drive-strength = <10>;
                        };
                        csi_mclk0_pins_b: csi_mclk0@1 {
                                pins = "PE3";
                                function = "gpio_in";
                        };
                        csi0_pins_a: csi0@0 {
                                pins = "PE2", "PE0", "PE1", "PE4", "PE5",
                                                 "PE6", "PE7", "PE8", "PE9", "PE10", "PE11";
                                function = "ncsi0";
                                drive-strength = <10>;
                        };
                        csi0_pins_b: csi0@1 {
                                pins = "PE2", "PE0", "PE1", "PE4", "PE5",
                                                 "PE6", "PE7", "PE8", "PE9", "PE10", "PE11";
                                function = "io_disabled";
                                drive-strength = <10>;
                        };

                        lvds0_pins_a: lvds0@0 {
                                pins  = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9";
                                function = "lvds0";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        lvds0_pins_b: lvds0@1 {
                                pins  = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9";
                                function = "io_disabled";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        rgb24_pins_a: rgb24@0 {
                                pins = "PB2", "PB3", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", \
                                        "PB4", "PB5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", \
                                        "PB6", "PB7", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", \
                                        "PD18", "PD19", "PD20", "PD21";
                                function = "lcd0";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        rgb24_pins_b: rgb24@1 {
                                pins = "PB2", "PB3", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", \
                                        "PB4", "PB5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", \
                                        "PB6", "PB7", "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", \
                                        "PD18", "PD19", "PD20", "PD21";
                                function = "io_disabled";
                                bias-disable;
                        };

                        rgb18_pins_a: rgb18@0 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", \
                                        "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", \
                                        "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", \
                                        "PD18", "PD19", "PD20", "PD21";
                                function = "lcd0";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        rgb18_pins_b: rgb18@1 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", \
                                        "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", \
                                        "PD12", "PD13", "PD14", "PD15", "PD16", "PD17", \
                                        "PD18", "PD19", "PD20", "PD21";
                                function = "io_disabled";
                                bias-disable;
                        };

                        dsi2lane_pins_a: dsi2lane@0 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5";
                                function = "dsi";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        dsi2lane_pins_b: dsi2lane@1 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5";
                                function = "io_disabled";
                                bias-disable;
                        };

                        dsi4lane_pins_a: dsi4lane@0 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9";
                                function = "dsi";
                                drive-strength = <30>;
                                bias-disable;
                        };

                        dsi4lane_pins_b: dsi4lane@1 {
                                pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9";
                                function = "io_disabled";
                                bias-disable;
                        };

                };

                pinctrl_test: pinctrl_test@0 {
                        reg = <0x0 0x0 0x0 0x0>;
                        compatible = "allwinner,sunxi-pinctrl-test";
                        device_type = "pinctrl-test";
                        /* For pin state selecting test */
                        pinctrl-0 = <&test_pins_a>;
                        pinctrl-1 = <&test_pins_b>;
                        pinctrl-names = "default", "sleep";
                        /* For pin basic_function/irq test */
                        test-gpios = <&pio PB 0 GPIO_ACTIVE_LOW>;
                        interrupt-parent = <&pio>;
                        interrupts = <PB 1 IRQ_TYPE_LEVEL_HIGH>;
                };

                uart0: uart@2500000 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart0";
                        reg = <0x0 0x02500000 0x0 0x400>;
                        interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <64>;
                        clocks = <&ccu CLK_BUS_UART0>;
                        clock-names = "uart0";
                        resets = <&ccu RST_BUS_UART0>;
                        uart0_port = <0>;
                        uart0_type = <2>;
                        status = "disabled";
                };

                uart1: uart@2500400 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart1";
                        reg = <0x0 0x02500400 0x0 0x400>;
                        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <256>;
                        clocks = <&ccu CLK_BUS_UART1>;
                        clock-names = "uart1";
                        resets = <&ccu RST_BUS_UART1>;
                        uart1_port = <1>;
                        uart1_type = <4>;
                        status = "okay";
                };

                uart2: uart@2500800 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart2";
                        reg = <0x0 0x02500800 0x0 0x400>;
                        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <256>;
                        clocks = <&ccu CLK_BUS_UART2>;
                        clock-names = "uart2";
                        resets = <&ccu RST_BUS_UART2>;
                        uart2_port = <2>;
                        uart2_type = <4>;
                        status = "disabled";
                };

                uart3: uart@2500c00 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart3";
                        reg = <0x0 0x02500c00 0x0 0x400>;
                        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <256>;
                        clocks = <&ccu CLK_BUS_UART3>;
                        clock-names = "uart3";
                        resets = <&ccu RST_BUS_UART3>;
                        uart3_port = <3>;
                        uart3_type = <4>;
                        status = "disabled";
                };

                uart4: uart@2501000 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart4";
                        reg = <0x0 0x02501000 0x0 0x400>;
                        interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <256>;
                        clocks = <&ccu CLK_BUS_UART4>;
                        clock-names = "uart4";
                        resets = <&ccu RST_BUS_UART4>;
                        uart4_port = <4>;
                        uart4_type = <2>;
                        status = "disabled";
                };

                uart5: uart@2501400 {
                        compatible = "allwinner,sun8i-uart";
                        device_type = "uart5";
                        reg = <0x0 0x02501400 0x0 0x400>;
                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,uart-fifosize = <256>;
                        clocks = <&ccu CLK_BUS_UART5>;
                        clock-names = "uart5";
                        resets = <&ccu RST_BUS_UART5>;
                        uart5_port = <5>;
                        uart5_type = <2>;
                        status = "disabled";
                };
                cryptoengine: ce@03040000 {
                        compatible = "allwinner,sunxi-ce";
                        device_name = "ce";
                        reg = <0x0 0x03040000 0x0 0xa0>, /* non-secure space */
                              <0x0 0x03040800 0x0 0xa0>; /* secure space */
                        interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, /*non-secure*/
                                   <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>; /* secure*/
                        clock-frequency = <400000000>; /* 400MHz */
                        clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>,
                                        <&ccu CLK_PLL_PERIPH0_2X>;
                        clock-names = "bus_ce", "ce_clk", "mbus_ce", "pll_periph0_2x";
                        resets = <&ccu RST_BUS_CE>;
                        status = "okay";
                };

                gmac0: eth@4500000 {
                        compatible = "allwinner,sunxi-gmac";
                        reg = <0x0 0x04500000 0x0 0x10000>,
                              <0x0 0x03000030 0x0 0x4>;
                        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "gmacirq";
                        clocks = <&ccu CLK_BUS_EMAC0>, <&ccu CLK_EMAC0_25M>;
                        clock-names = "gmac", "ephy";
                        resets = <&ccu RST_BUS_EMAC0>;
                        device_type = "gmac0";
                        gmac-power0;
                        gmac-power1;
                        gmac-power2;
                        status = "disabled";
                };

                sdc2: sdmmc@4022000 {
                        compatible = "allwinner,sunxi-mmc-v4p6x";
                        device_type = "sdc2";
                        reg = <0x0 0x04022000 0x0 0x1000>;
                        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&dcxo24M>,
                                 <&ccu CLK_PLL_PERIPH0_2X>,
                                 <&ccu CLK_MMC2>,
                                 <&ccu CLK_BUS_MMC2>;
                        clock-names = "osc24m","pll_periph","mmc","ahb";
                        resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "rst";
                        pinctrl-names = "default","sleep";
                        pinctrl-0 = <&sdc2_pins_a>;
                        pinctrl-1 = <&sdc2_pins_b>;
                        bus-width = <4>;
                        req-page-count = <2>;
                        cap-mmc-highspeed;
                        cap-cmd23;
                        mmc-cache-ctrl;
                        non-removable;
                        /*max-frequency = <200000000>;*/
                        max-frequency = <50000000>;
                        cap-erase;
                        mmc-high-capacity-erase-size;
                        no-sdio;
                        no-sd;
                        /*-- speed mode --*/
                        /*sm0: DS26_SDR12*/
                        /*sm1: HSSDR52_SDR25*/
                        /*sm2: HSDDR52_DDR50*/
                        /*sm3: HS200_SDR104*/
                        /*sm4: HS400*/
                        /*-- frequency point --*/
                        /*f0: CLK_400K*/
                        /*f1: CLK_25M*/
                        /*f2: CLK_50M*/
                        /*f3: CLK_100M*/
                        /*f4: CLK_150M*/
                        /*f5: CLK_200M*/

                        sdc_tm4_sm0_freq0 = <0>;
                        sdc_tm4_sm0_freq1 = <0>;
                        sdc_tm4_sm1_freq0 = <0x00000000>;
                        sdc_tm4_sm1_freq1 = <0>;
                        sdc_tm4_sm2_freq0 = <0x00000000>;
                        sdc_tm4_sm2_freq1 = <0>;
                        sdc_tm4_sm3_freq0 = <0x05000000>;
                        sdc_tm4_sm3_freq1 = <0x00000005>;
                        sdc_tm4_sm4_freq0 = <0x00050000>;
                        sdc_tm4_sm4_freq1 = <0x00000004>;
                        sdc_tm4_sm4_freq0_cmd = <0>;
                        sdc_tm4_sm4_freq1_cmd = <0>;

                        /*vmmc-supply = <&reg_3p3v>;*/
                        /*vqmc-supply = <&reg_3p3v>;*/
                        /*vdmc-supply = <&reg_3p3v>;*/
                        /*vmmc = "vcc-card";*/
                        /*vqmc = "";*/
                        /*vdmc = "";*/
                        /*sunxi-power-save-mode;*/
                };

                sdc0: sdmmc@4020000 {
                        compatible = "allwinner,sunxi-mmc-v5p3x";
                        device_type = "sdc0";
                        reg = <0x0 0x04020000 0x0 0x1000>;
                        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&dcxo24M>,
                                 <&ccu CLK_PLL_PERIPH0_2X>,
                                 <&ccu CLK_MMC0>,
                                 <&ccu CLK_BUS_MMC0>;
                        clock-names = "osc24m","pll_periph","mmc","ahb";
                        resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "rst";
                        pinctrl-names = "default","mmc_1v8","sleep","uart_jtag";
                        pinctrl-0 = <&sdc0_pins_a>;
                        pinctrl-1 = <&sdc0_pins_b>;
                        pinctrl-2 = <&sdc0_pins_c>;
                        pinctrl-3 = <&sdc0_pins_d &sdc0_pins_e>;
                        max-frequency = <50000000>;
                        bus-width = <4>;
                        req-page-count = <2>;
                        /*non-removable;*/
                        /*broken-cd;*/
                        /*cd-inverted*/
                        /*cd-gpios = <&pio PF 6 GPIO_ACTIVE_LOW>;*/
                        /* vmmc-supply = <&reg_3p3v>;*/
                        /* vqmc-supply = <&reg_3p3v>;*/
                        /* vdmc-supply = <&reg_3p3v>;*/
                        /*vmmc = "vcc-card";*/
                        /*vqmc = "";*/
                        /*vdmc = "";*/
                        cap-sd-highspeed;
                        cap-wait-while-busy;
                        no-sdio;
                        no-mmc;
                        /*sd-uhs-sdr50;*/
                        /*sd-uhs-ddr50;*/
                        /*cap-sdio-irq;*/
                        /*keep-power-in-suspend;*/
                        /*ignore-pm-notify;*/
                        /*sunxi-power-save-mode;*/
                        /*sunxi-dly-400k = <1 0 0 0>; */
                        /*sunxi-dly-26M  = <1 0 0 0>;*/
                        /*sunxi-dly-52M  = <1 0 0 0>;*/
                        /*sunxi-dly-52M-ddr4  = <1 0 0 0>;*/
                        /*sunxi-dly-52M-ddr8  = <1 0 0 0>;*/
                        /*sunxi-dly-104M  = <1 0 0 0>;*/
                        /*sunxi-dly-208M  = <1 0 0 0>;*/
                        /*sunxi-dly-104M-ddr  = <1 0 0 0>;*/
                        /*sunxi-dly-208M-ddr  = <1 0 0 0>;*/
                };

                sdc1: sdmmc@4021000 {
                        compatible = "allwinner,sunxi-mmc-v5p3x";
                        device_type = "sdc1";
                        reg = <0x0 0x04021000 0x0 0x1000>;
                        interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&dcxo24M>,
                                 <&ccu CLK_PLL_PERIPH0_2X>,
                                 <&ccu CLK_MMC1>,
                                 <&ccu CLK_BUS_MMC1>;
                        clock-names = "osc24m","pll_periph","mmc","ahb";
                        resets = <&ccu RST_BUS_MMC1>;
                        reset-names = "rst";
                        pinctrl-names = "default","sleep";
                        pinctrl-0 = <&sdc1_pins_a>;
                        pinctrl-1 = <&sdc1_pins_b>;
                        max-frequency = <50000000>;
                        bus-width = <4>;
                        /*broken-cd;*/
                        /*cd-inverted*/
                        /*cd-gpios = <&pio PG 6 6 1 2 0>;*/
                        /* vmmc-supply = <&reg_3p3v>;*/
                        /* vqmc-supply = <&reg_3p3v>;*/
                        /* vdmc-supply = <&reg_3p3v>;*/
                        /*vmmc = "vcc-card";*/
                        /*vqmc = "";*/
                        /*vdmc = "";*/
                        cap-sd-highspeed;
                        no-mmc;
                        /*sd-uhs-sdr50;*/
                        /*sd-uhs-ddr50;*/
                        /*sd-uhs-sdr104;*/
                        /*cap-sdio-irq;*/
                        keep-power-in-suspend;
                        /*ignore-pm-notify;*/
                        /*sunxi-power-save-mode;*/
                        /*sunxi-dly-400k = <1 0 0 0 0>; */
                        /*sunxi-dly-26M  = <1 0 0 0 0>;*/
                        /*sunxi-dly-52M  = <1 0 0 0 0>;*/
                        sunxi-dly-52M-ddr4  = <1 0 0 0 2>;
                        /*sunxi-dly-52M-ddr8  = <1 0 0 0 0>;*/
                        sunxi-dly-104M  = <1 0 0 0 1>;
                        /*sunxi-dly-208M  = <1 1 0 0 0>;*/
                        sunxi-dly-208M  = <1 0 0 0 1>;
                        /*sunxi-dly-104M-ddr  = <1 0 0 0 0>;*/
                        /*sunxi-dly-208M-ddr  = <1 0 0 0 0>;*/

                        status = "okay";
                };

                tpadc: tpadc@2009c00 {
                        compatible = "allwinner,tp_key";
                        reg = <0x0 0x02009c00 0x0 0x400>;
                        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_TPADC>, <&ccu CLK_BUS_TPADC>;
                        clock-names = "mod", "bus";
                        clock-frequency = <1000000>;
                        resets = <&ccu RST_BUS_TPADC>;
                        status = "disabled";
                };

                rtp:rtp@2009c00 {
                        compatible = "allwinner,sun8i-ts";
                        reg = <0x0 0x02009c00 0x0 0x400>;
                        clocks = <&ccu CLK_TPADC>, <&ccu CLK_BUS_TPADC>;
                        clock-names = "mod", "bus";
                        clock-frequency = <1000000>;
                        resets = <&ccu RST_BUS_TPADC>;
                        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
                };

                spi0: spi@4025000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-spi";
                        device_type = "spi0";
                        reg = <0x0 0x04025000 0x0 0x1000>;
                        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_PLL_PERIPH0>, <&ccu CLK_SPI0>, <&ccu CLK_BUS_SPI0>;
                        clock-names = "pll", "mod", "bus";
                        resets = <&ccu RST_BUS_SPI0>;
                        clock-frequency = <100000000>;
                        spi0_cs_number = <1>;
                        spi0_cs_bitmap = <1>;
                        dmas = <&dma 22>, <&dma 22>;
                        dma-names = "tx", "rx";
                        status = "disabled";
                };

                spi1: spi@4026000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-spi";
                        device_type = "spi1";
                        reg = <0x0 0x04026000 0x0 0x1000>;
                        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_PLL_PERIPH0>, <&ccu CLK_SPI1>, <&ccu CLK_BUS_SPI1>;
                        clock-names = "pll", "mod", "bus";
                        resets = <&ccu RST_BUS_SPI1>;
                        clock-frequency = <100000000>;
                        spi1_cs_number = <1>;
                        spi1_cs_bitmap = <1>;
                        dmas = <&dma 23>, <&dma 23>;
                        dma-names = "tx", "rx";
                        status = "disabled";
                };

                ve: ve@1c0e000 {
                            compatible = "allwinner,sunxi-cedar-ve";
                            reg = <0x0 0x01c0e000 0x0 0x1000>,
                                <0x0 0x03000000 0x0 0x10>,
                                <0x0 0x03001000 0x0 0x1000>;
                            interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
                            clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, <&ccu CLK_MBUS_VE>;
                            clock-names = "bus_ve", "ve", "mbus_ve";
                            resets = <&ccu RST_BUS_VE>;
                            power-domains = <&pd R528_PD_VE>;
                            iommus = <&mmu_aw 0 1>;
                            status = "okay";
                };

                twi0: twi@2502000{
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-twi";
                        device_type = "twi0";
                        reg = <0x0 0x02502000 0x0 0x400>;
                        interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_I2C0>;
                        resets = <&ccu RST_BUS_I2C0>;
                        clock-names = "bus";
                        clock-frequency = <400000>;
                        status = "disabled";
                };

                twi1: twi@2502400{
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-twi";
                        device_type = "twi1";
                        reg = <0x0 0x02502400 0x0 0x400>;
                        interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_I2C1>;
                        resets = <&ccu RST_BUS_I2C1>;
                        clock-names = "bus";
                        clock-frequency = <200000>;
                        status = "disabled";
                };

                twi2: twi@2502800{
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-twi";
                        device_type = "twi2";
                        reg = <0x0 0x02502800 0x0 0x400>;
                        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_I2C2>;
                        resets = <&ccu RST_BUS_I2C2>;
                        clock-names = "bus";
                        clock-frequency = <100000>;
                        status = "disabled";
                };

                twi3: twi@2502c00{
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sun8i-twi";
                        device_type = "twi3";
                        reg = <0x0 0x02502c00 0x0 0x400>;
                        interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_I2C3>;
                        resets = <&ccu RST_BUS_I2C3>;
                        clock-names = "bus";
                        clock-frequency = <100000>;
                        status = "disabled";
                };

                ledc: ledc@2008000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "allwinner,sunxi-leds";
                        reg = <0x0 0x02008000 0x0 0x400>;
                        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "ledcirq";
                        clocks = <&ccu CLK_LEDC>, <&ccu CLK_BUS_LEDC>;
                        clock-names = "clk_ledc", "clk_cpuapb";
                        dmas = <&dma 42>, <&dma 42>;
                        dma-names = "rx", "tx";
                        resets = <&ccu RST_BUS_LEDC>;
                        reset-names = "ledc_reset";
                        status = "disable";
                };

                pwm: pwm@2000c00 {
                        #pwm-cells = <0x3>;
                        compatible = "allwinner,sunxi-pwm";
                        reg = <0x0 0x02000c00 0x0 0x400>;
                        clocks = <&ccu CLK_BUS_PWM>;
                        resets = <&ccu RST_BUS_PWM>;
                        pwm-number = <8>;
                        pwm-base = <0x0>;
                        sunxi-pwms = <&pwm0>, <&pwm1>, <&pwm2>, <&pwm3>, <&pwm4>,
                                <&pwm5>, <&pwm6>, <&pwm7>;
                };

                pwm0: pwm0@2000c10 {
                        compatible = "allwinner,sunxi-pwm0";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c10 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm1: pwm1@2000c11 {
                        compatible = "allwinner,sunxi-pwm1";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c11 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm2: pwm2@2000c12 {
                        compatible = "allwinner,sunxi-pwm2";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c12 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm3: pwm3@2000c13 {
                        compatible = "allwinner,sunxi-pwm3";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c13 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm4: pwm4@2000c14 {
                        compatible = "allwinner,sunxi-pwm4";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c14 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm5: pwm5@2000c15 {
                        compatible = "allwinner,sunxi-pwm5";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c15 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm6: pwm6@2000c16 {
                        compatible = "allwinner,sunxi-pwm6";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c16 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                pwm7: pwm7@2000c17 {
                        compatible = "allwinner,sunxi-pwm7";
                        pinctrl-names = "active", "sleep";
                        reg = <0x0 0x02000c17 0x0 0x4>;
                        reg_base = <0x02000c00>;
                };

                lcd_fb0: lcd_fb0@0 {
                        compatible = "allwinner,sunxi-lcd_fb0";
                        pinctrl-names = "active","sleep";

                        status = "okay";
                };

                keyboard0: keyboard@2009800 {
                        compatible = "allwinner,keyboard_1350mv";
                        reg = <0x0 0x02009800 0x0 0x400>;
                        interrupts = <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>;
                        clocks = <&ccu CLK_BUS_LRADC>;
                        clock-names = "mclk";
                        resets = <&ccu RST_BUS_LRADC>;
                        key_cnt = <5>;
                        key0 = <210 115>;
                        key1 = <410 114>;
                        key2 = <590 139>;
                        key3 = <750 28>;
                        key4 = <880 172>;
                        wakeup-source;
                        status = "okay";
                };

                sid@3006000 {
                        compatible = "allwinner,sun8iw20p1-sid", "allwinner,sunxi-sid";
                        reg = <0x0 0x03006000 0 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <1>;

                        secure_status {
                                reg = <0x0 0>;
                                offset = <0xa0>;
                                size = <0x4>;
                        };

                        chipid {
                                reg = <0x0 0>;
                                offset = <0x200>;
                                size = <0x10>;
                        };

                        rotpk {
                                reg = <0x0 0>;
                                offset = <0x140>;
                                size = <0x4>;
                        };

                        speedbin_efuse: speedbin@00 {
                                reg = <0x00 2>;
                        };

                        cpubin_efuse: cpubin@28 {
                                reg = <0x28 2>;
                        };

                        ths_calib: calib@14 {
                                reg = <0x14 8>;
                        };
                };

                gpadc: gpadc@2009000 {
                        compatible = "allwinner,sunxi-gpadc";
                        reg = <0x0 0x02009000 0x0 0x400>;
                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_GPADC>;
                        clock-names = "bus";
                        resets = <&ccu RST_BUS_GPADC>;
                        status = "okay";
                };

                vind0: vind@5800800 {
                        compatible = "allwinner,sunxi-vin-media", "simple-bus";
                        #address-cells = <2>;
                        #size-cells = <2>;
                        ranges;
                        device_id = <0>;
                        csi_top = <336000000>;
                        csi_isp = <327000000>;
                        reg = <0x0 0x05800800 0x0 0x200>,
                                <0x0 0x05800000 0x0 0x800>;
                        clocks = <&ccu CLK_CSI_TOP>, <&ccu CLK_PLL_VIDEO1_2X>,
                                <&ccu CLK_CSI0_MCLK>, <&dcxo24M>, <&ccu CLK_PLL_VIDEO1>,
                                <&ccu CLK_BUS_CSI>, <&ccu CLK_MBUS_CSI>;
                        clock-names = "csi_top", "csi_top_src",
                                        "csi_mclk0", "csi_mclk0_24m", "csi_mclk0_pll",
                                        "csi_bus", "csi_mbus";
                        resets = <&ccu RST_BUS_CSI>;
                        reset-names = "csi_ret";
                        pinctrl-names = "mclk0-default", "mclk0-sleep";
                        pinctrl-0 = <&csi_mclk0_pins_a>;
                        pinctrl-1 = <&csi_mclk0_pins_b>;
                        status = "okay";

                        csi0: csi@5801000{
                                compatible = "allwinner,sunxi-csi";
                                reg = <0x0 0x05801000 0x0 0x1000>;
                                interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                                pinctrl-names = "default","sleep";
                                pinctrl-0 = <&csi0_pins_a>;
                                pinctrl-1 = <&csi0_pins_b>;
                                device_id = <0>;
                                iommus = <&mmu_aw 1 1>;
                                status = "okay";
                        };
                        isp0: isp@5809410 {
                                compatible = "allwinner,sunxi-isp";
                                reg = <0x0 0x05809410 0x0 0x10>;
                                device_id = <0xfe>;

                                status = "okay";
                        };
                        isp1: isp@5809420 {
                                compatible = "allwinner,sunxi-isp";
                                reg = <0x0 0x05809420 0x0 0x10>;
                                device_id = <0xff>;
                                status = "okay";
                        };
                        scaler0: scaler@5809430 {
                                compatible = "allwinner,sunxi-scaler";
                                reg = <0x0 0x05809430 0x0 0x10>;
                                device_id = <0xfe>;
                                status = "okay";
                        };
                        scaler1: scaler@5809440 {
                                compatible = "allwinner,sunxi-scaler";
                                reg = <0x0 0x05809440 0x0 0x10>;
                                device_id = <0xff>;
                                status = "okay";
                        };
                        actuator0: actuator@5809450 {
                                compatible = "allwinner,sunxi-actuator";
                                device_type = "actuator0";
                                reg = <0x0 0x05809450 0x0 0x10>;
                                actuator0_name = "ad5820_act";
                                actuator0_slave = <0x18>;
                                actuator0_af_pwdn = <>;
                                actuator0_afvdd = "afvcc-csi";
                                actuator0_afvdd_vol = <2800000>;
                                status = "disabled";
                        };
                        flash0: flash@5809460 {
                                device_type = "flash0";
                                compatible = "allwinner,sunxi-flash";
                                reg = <0x0 0x05809460 0x0 0x10>;
                                flash0_type = <2>;
                                flash0_en = <>;
                                flash0_mode = <>;
                                flash0_flvdd = "";
                                flash0_flvdd_vol = <>;
                                device_id = <0>;
                                status = "disabled";
                        };
                        sensor0: sensor@5809470 {
                                reg = <0x0 0x05809470 0x0 0x10>;
                                device_type = "sensor0";
                                compatible = "allwinner,sunxi-sensor";
                                sensor0_mname = "ov5640";
                                sensor0_twi_cci_id = <2>;
                                sensor0_twi_addr = <0x78>;
                                sensor0_mclk_id = <0>;
                                sensor0_pos = "rear";
                                sensor0_isp_used = <0>;
                                sensor0_fmt = <0>;
                                sensor0_stby_mode = <0>;
                                sensor0_vflip = <0>;
                                sensor0_hflip = <0>;
                                sensor0_iovdd-supply = <>;
                                sensor0_iovdd_vol = <>;
                                sensor0_avdd-supply = <>;
                                sensor0_avdd_vol = <>;
                                sensor0_dvdd-supply = <>;
                                sensor0_dvdd_vol = <>;
                                sensor0_power_en = <>;
                                sensor0_reset = <&pio PE 9 GPIO_ACTIVE_LOW>;
                                sensor0_pwdn = <&pio PE 8 GPIO_ACTIVE_LOW>;
                                sensor0_sm_vs = <>;
                                flash_handle = <&flash0>;
                                act_handle = <&actuator0>;
                                device_id = <0>;
                                status  = "okay";
                        };
                        sensor1: sensor@5809480 {
                                reg = <0x0 0x05809480 0x0 0x10>;
                                device_type = "sensor1";
                                compatible = "allwinner,sunxi-sensor";
                                sensor1_mname = "ov5647";
                                sensor1_twi_cci_id = <3>;
                                sensor1_twi_addr = <0x6c>;
                                sensor1_mclk_id = <1>;
                                sensor1_pos = "front";
                                sensor1_isp_used = <0>;
                                sensor1_fmt = <0>;
                                sensor1_stby_mode = <0>;
                                sensor1_vflip = <0>;
                                sensor1_hflip = <0>;
                                sensor1_iovdd-supply = <>;
                                sensor1_iovdd_vol = <>;
                                sensor1_avdd-supply = <>;
                                sensor1_avdd_vol = <>;
                                sensor1_dvdd-supply = <>;
                                sensor1_dvdd_vol = <>;
                                sensor1_power_en = <>;
                                sensor1_reset = <&pio PE 7 GPIO_ACTIVE_LOW>;
                                sensor1_pwdn = <&pio PE 6 GPIO_ACTIVE_LOW>;
                                sensor1_sm_vs = <>;
                                flash_handle = <>;
                                act_handle = <>;
                                device_id = <1>;
                                status  = "okay";
                        };
                        vinc0: vinc@5809000 {
                                compatible = "allwinner,sunxi-vin-core";
                                device_type = "vinc0";
                                reg = <0x0 0x05809000 0x0 0x200>;
                                interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
                                vinc0_csi_sel = <0>;
                                vinc0_mipi_sel = <0xff>;
                                vinc0_isp_sel = <0>;
                                vinc0_tdm_rx_sel = <0xff>;
                                vinc0_rear_sensor_sel = <0>;
                                vinc0_front_sensor_sel = <0>;
                                vinc0_sensor_list = <0>;
                                device_id = <0>;
                                iommus = <&mmu_aw 1 1>;
                                status = "okay";
                        };
                        vinc1: vinc@5809200 {
                                device_type = "vinc1";
                                compatible = "allwinner,sunxi-vin-core";
                                reg = <0x0 0x05809200 0x0 0x200>;
                                interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
                                vinc1_csi_sel = <0>;
                                vinc1_mipi_sel = <0xff>;
                                vinc1_isp_sel = <1>;
                                vinc1_tdm_rx_sel = <0xff>;
                                vinc1_rear_sensor_sel = <0>;
                                vinc1_front_sensor_sel = <0>;
                                vinc1_sensor_list = <0>;
                                device_id = <1>;
                                iommus = <&mmu_aw 1 1>;
                                status = "okay";
                        };

                };
                s_cir0: s_cir@7040000 {
                        compatible = "allwinner,s_cir";
                        reg = <0x0 0x07040000 0x0 0x400>;
                        interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&r_ccu CLK_R_APB0_BUS_IRRX>, <&dcxo24M>, <&r_ccu CLK_R_APB0_IRRX>;
                        clock-names = "bus", "pclk", "mclk";
                        resets = <&r_ccu RST_R_APB0_BUS_IRRX>;
                        status = "disabled";
                };

                ir1: ir@2003000 {
                        compatible = "allwinner,irtx";
                        reg = <0x0 0x02003000 0x0 0x400>;
                        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_IR_TX>, <&dcxo24M>, <&ccu CLK_IR_TX>;
                        clock-names = "bus", "pclk", "mclk";
                        resets = <&ccu RST_BUS_IR_TX>;
                        status = "disabled";
                };

                di: deinterlace@5400000 {
                        compatible = "allwinner,sunxi-deinterlace";
                        reg = <0x0 0x05400000 0x0 0x0000ffff>;
                        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_DI>,
                                 <&ccu CLK_BUS_DI>,
                                 <&ccu CLK_PLL_PERIPH0_2X>;
                        clock-names = "clk_di",
                                      "pll_periph",
                                      "clk_bus_di";
                        resets = <&ccu RST_BUS_DI>;
                        reset-names = "rst_bus_di";

                        assigned-clocks = <&ccu CLK_DI>;
                        assigned-clock-parents = <&ccu CLK_PLL_PERIPH0_2X>;
                        assigned-clock-rates = <300000000>;

                        iommus = <&mmu_aw 4 1>;
                        status = "okay";
                };

                g2d: g2d@5410000 {
                        compatible = "allwinner,sunxi-g2d";
                        reg = <0x0 0x05410000 0x0 0x3ffff>;
                        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_G2D>, <&ccu CLK_G2D>, <&ccu CLK_MBUS_G2D>;
                        clock-names = "bus", "g2d", "mbus_g2d";
                        resets = <&ccu RST_BUS_G2D>;
                        iommus = <&mmu_aw 3 1>;
                        status = "okay";
                };

                disp: disp@5000000 {
                        compatible = "allwinner,sunxi-disp";
                        reg = <0x0 0x05000000 0x0 0x3fffff>,    /* de0 */
                              <0x0 0x05460000 0x0 0xfff>,       /*display_if_top*/
                              <0x0 0x05461000 0x0 0xfff>,       /* tcon-lcd0 */
                              <0x0 0x05470000 0x0 0xfff>,       /* tcon-tv */
                              <0x0 0x05450000 0x0 0x1fff>;      /* dsi0*/
                        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,/*tcon-lcd0*/
                                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,/*tcon-tv */
                                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;/*dsi*/
                        clocks = <&ccu CLK_DE0>,
                                 <&ccu CLK_DE0>,
                                 <&ccu CLK_BUS_DE0>,
                                 <&ccu CLK_BUS_DE0>,
                                 <&ccu CLK_BUS_DPSS_TOP0>,
                                 <&ccu CLK_BUS_DPSS_TOP0>,
                                 <&ccu CLK_MIPI_DSI>,
                                 <&ccu CLK_BUS_MIPI_DSI>,
                                 <&ccu CLK_TCON_LCD0>,
                                 <&ccu CLK_TCON_TV>,
                                 <&ccu CLK_BUS_TCON_LCD0>,
                                 <&ccu CLK_BUS_TCON_TV>,
                                 <&ccu CLK_MIPI_DSI>,
                                 <&ccu CLK_BUS_MIPI_DSI>;
                        clock-names = "clk_de0",
                                        "clk_de1",
                                        "clk_bus_de0",
                                        "clk_bus_de1",
                                        "clk_bus_dpss_top0",
                                        "clk_bus_dpss_top1",
                                        "clk_mipi_dsi0",
                                        "clk_bus_mipi_dsi0",
                                        "clk_tcon0",
                                        "clk_tcon1",/*tcon-tv actually*/
                                        "clk_bus_tcon0",
                                        "clk_bus_tcon1",/*tcon-tv actually*/
                                        "clk_mipi_dsi0",
                                        "clk_bus_mipi_dsi0";
                        resets = <&ccu RST_BUS_DE0>,
                                 <&ccu RST_BUS_DE0>,
                                 <&ccu RST_BUS_DPSS_TOP0>,
                                 <&ccu RST_BUS_DPSS_TOP0>,
                                 <&ccu RST_BUS_MIPI_DSI>,
                                 <&ccu RST_BUS_TCON_LCD0>,
                                 <&ccu RST_BUS_TCON_TV>,
                                 <&ccu RST_BUS_LVDS0>;
                        reset-names = "rst_bus_de0",
                                        "rst_bus_de1",
                                        "rst_bus_dpss_top0",
                                        "rst_bus_dpss_top1",
                                        "rst_bus_mipi_dsi0",
                                        "rst_bus_tcon0",
                                        "rst_bus_tcon1",
                                        "rst_bus_lvds0";

                        assigned-clocks = <&ccu CLK_DE0>,
                        <&ccu CLK_MIPI_DSI>,
                        <&ccu CLK_TCON_LCD0>,
                        <&ccu CLK_TCON_TV>;
                        assigned-clock-parents = <&ccu CLK_PLL_PERIPH0_2X>,
                        <&ccu CLK_PLL_PERIPH0>,
                        <&ccu CLK_PLL_VIDEO0_4X>,
                        <&ccu CLK_PLL_VIDEO1_4X>;
                        assigned-clock-rates = <300000000>,
                        <150000000>,
                        <0>,
                        <0>;

                        boot_disp = <0>;
                        boot_disp1 = <0>;
                        boot_disp2 = <0>;
                        fb_base = <0>;
                        iommus = <&mmu_aw 2 0>;
                        status = "okay";
                };

                lcd0: lcd0@5461000 {
                        compatible = "allwinner,sunxi-lcd0";
                        reg = <0x0 0x05461000 0x0 0xfff>;
                        pinctrl-names = "active","sleep";
                        status = "okay";
                };

                tv0: tv0@5600000 {
                        compatible = "allwinner,sunxi-tv";
                        reg = <0x0 0x05600000 0x0 0x3fff>,
                                <0x0 0x05604000 0x0 0x3fff>;
                        clocks = <&ccu CLK_BUS_TVE_TOP>,
                                 <&ccu CLK_TVE>,
                                 <&ccu CLK_BUS_TVE>;
                        clock-names = "clk_bus_tve_top",
                                      "clk_tve",
                                      "clk_bus_tve";
                        resets = <&ccu RST_BUS_TVE_TOP>,
                                 <&ccu RST_BUS_TVE>;
                        reset-names = "rst_bus_tve_top", "rst_bus_tve";

                        device_type = "tv0";
                        pinctrl-names = "active","sleep";
                        status = "okay";
                };

                hwspinlock: hwspinlock@0x3005000 {
                        compatible = "allwinner,sunxi-hwspinlock";
                        reg = <0x0 0x3005000 0x0 0x1000>;
                        #hwlock-cells = <1>;
                        clocks = <&ccu CLK_BUS_SPINLOCK>;
                        clock-names = "clk_hwspinlock_bus";
                        resets = <&ccu RST_BUS_SPINLOCK>;
                        reset-names = "rst";
                        num-locks = <32>;
                        status = "disabled";
                };
                /* old msgbox in dts
                msgbox: msgbox@3003000 {
                        compatible = "sunxi,msgbox-amp";
                        reg = <0x0 0x03003000 0x0 0x1000>,
                              <0x0 0x01701000 0x0 0x1000>,
                              <0x0 0x0601f000 0x0 0x1000>;
                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
                                        <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
                                        <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_MSGBOX0>;
                        rpmsg_id = "sunxi,dsp-msgbox","sunxi,dsp-power-msgbox";
                        resets = <&ccu RST_BUS_MSGBOX0>;
                        reset-names = "rst";
                        msgbox_amp_counts = <3>;
                        msgbox_amp_local = <0>;
                        rpmsg_amp_remote-0 = <1>;
                        rpmsg_read_channel-0 = <1>;
                        rpmsg_write_channel-0 = <1>;
                        rpmsg_amp_remote-1 = <1>;
                        rpmsg_read_channel-1 = <0>;
                        rpmsg_write_channel-1 = <0>;
                }; */
                msgbox: msgbox@3003000 {
                        compatible = "allwinner,sunxi-msgbox";
                        #mbox-cells = <1>;
                        reg = <0x0 0x03003000 0x0 0x1000>,
                              <0x0 0x01701000 0x0 0x1000>,
                              <0x0 0x0601f000 0x0 0x1000>;
                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
                                        <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
                                        <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_MSGBOX0>;
                        resets = <&ccu RST_BUS_MSGBOX0>;
                        reset-names = "rst";
                        local_id = <0>;
                };

                hdmi: hdmi@5500000 {
                        compatible = "allwinner,sunxi-hdmi";
                        reg = <0x0 0x05500000 0x0 0xfffff>;
                        interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_HDMI>,
                                <&ccu CLK_HDMI_24M>,
                                <&ccu CLK_HDMI_CEC>,
                                <&ccu CLK_TCON_TV>;
                        clock-names = "clk_bus_hdmi",
                                        "clk_ddc",
                                        "clk_cec",
                                        "clk_tcon_tv";
                        resets = <&ccu RST_BUS_HDMI_SUB>,
                                <&ccu RST_BUS_HDMI_MAIN>;
                        reset-names = "rst_bus_sub",
                                      "rst_bus_main";
                        assigned-clocks = <&ccu CLK_HDMI_CEC>;
                        assigned-clock-parents = <&ccu CLK_HDMI_CEC_32K>;
                        assigned-clock-rates = <0>;
                        status = "okay";
                };
                usbc0:usbc0@0 {
                        device_type = "usbc0";
                        compatible = "allwinner,sunxi-otg-manager";
                        usb_port_type = <2>;
                        usb_detect_type = <1>;
                        usb_id_gpio;
                        usb_det_vbus_gpio;
                        usb_regulator_io = "nocare";
                        usb_wakeup_suspend = <0>;
                        usb_luns = <3>;
                        usb_serial_unique = <0>;
                        usb_serial_number = "20080411";
                        rndis_wceis = <1>;
                        status = "okay";
                };

                udc:udc-controller@0x04100000 {
                        compatible = "allwinner,sunxi-udc";
                        reg = <0x0 0x04100000 0x0 0x1000>, /*udc base*/
                              <0x0 0x00000000 0x0 0x100>; /*sram base*/
                        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_OTG>;
                        clock-names = "bus_otg";
                        resets = <&ccu RST_BUS_OTG>, <&ccu RST_USB_PHY0>;
                        reset-names = "otg", "phy";
                        status = "okay";
                };

                ehci0:ehci0-controller@0x04101000 {
                        compatible = "allwinner,sunxi-ehci0";
                        reg = <0x0 0x04101000 0x0 0xFFF>, /*hci0 base*/
                              <0x0 0x00000000 0x0 0x100>, /*sram base*/
                              <0x0 0x04100000 0x0 0x1000>; /*otg base*/
                        interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_EHCI0>;
                        clock-names = "bus_hci";
                        resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_USB_PHY0>;
                        reset-names = "hci", "phy";
                        hci_ctrl_no = <0>;
                        status = "okay";
                };

                ohci0:ohci0-controller@0x04101400 {
                        compatible = "allwinner,sunxi-ohci0";
                        reg = <0x0 0x04101400 0x0 0xFFF>, /*hci0 base*/
                              <0x0 0x00000000 0x0 0x100>, /*sram base*/
                              <0x0 0x04100000 0x0 0x1000>; /*otg base*/
                        interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
                        clock-names = "bus_hci", "ohci";
                        resets = <&ccu RST_BUS_OHCI0>, <&ccu RST_USB_PHY0>;
                        reset-names = "hci", "phy";
                        hci_ctrl_no = <0>;
                        status = "okay";
                };

                usbc1:usbc1@0 {
                        device_type = "usbc1";
                        usb_regulator_io = "nocare";
                        usb_wakeup_suspend = <0>;
                        status = "disable";
                };

                ehci1:ehci1-controller@0x04200000 {
                        compatible = "allwinner,sunxi-ehci1";
                        reg = <0x0 0x04200000 0x0 0xFFF>, /*ehci1 base*/
                              <0x0 0x00000000 0x0 0x100>, /*sram base*/
                              <0x0 0x04100000 0x0 0x1000>; /*otg base*/
                        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_EHCI1>;
                        clock-names = "bus_hci";
                        resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_USB_PHY1>;
                        reset-names = "hci", "phy";
                        hci_ctrl_no = <1>;
                        status = "disable";
                };

                ohci1:ohci1-controller@0x04200400 {
                        compatible = "allwinner,sunxi-ohci1";
                        reg = <0x0 0x04200400 0x0 0xFFF>, /*ohci1 base*/
                              <0x0 0x00000000 0x0 0x100>, /*sram base*/
                              <0x0 0x04100000 0x0 0x1000>; /*otg base*/
                        interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&ccu CLK_BUS_OHCI1>, <&ccu CLK_USB_OHCI1>;
                        clock-names = "bus_hci", "ohci";
                        resets = <&ccu RST_BUS_OHCI1>, <&ccu RST_USB_PHY1>;
                        reset-names = "hci", "phy";
                        hci_ctrl_no = <1>;
                        status = "disable";
                };

                /* codec addr: 0x02030000, the others is invalid to avoid build warining */
                codec:codec@2030000 {
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-internal-codec";
                        reg = <0x0 0x02030000 0x0 0x34c>;
                        clocks = <&ccu CLK_PLL_AUDIO0>,
                                 <&ccu CLK_PLL_AUDIO1_DIV5>,
                                 <&ccu CLK_AUDIO_DAC>,
                                 <&ccu CLK_AUDIO_ADC>,
                                 <&ccu CLK_BUS_AUDIO_CODEC>;
                        clock-names = "pll_audio0", "pll_audio1_div5",
                                      "audio_clk_dac", "audio_clk_adc",
                                      "audio_clk_bus";
                        resets = <&ccu RST_BUS_AUDIO_CODEC>;
                        rx_sync_en  = <0x00>;
                        device_type = "codec";
                        status = "okay";
                };

                dummy_cpudai:dummy_cpudai@203034c {
                        compatible = "allwinner,sunxi-dummy-cpudai";
                        reg = <0x0 0x0203034c 0x0 0x4>;
                        tx_fifo_size    = <128>;
                        rx_fifo_size    = <256>;
                        dac_txdata      = <0x02030020>;
                        adc_txdata      = <0x02030040>;
                        playback_cma    = <128>;
                        capture_cma     = <256>;
                        device_type = "cpudai";
                        dmas = <&dma 7>, <&dma 7>;
                        dma-names = "tx", "rx";
                        status = "okay";
                };

                sndcodec:sound@2030340 {
                        compatible = "allwinner,sunxi-codec-machine";
                        reg = <0x0 0x02030340 0x0 0x4>;
                        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
                        sunxi,audio-codec = <&codec>;
                        sunxi,cpudai-controller = <&dummy_cpudai>;
                        device_type = "sndcodec";
                        status = "okay";
                };

                sunxi_rpaf_dsp0:rpaf-dsp@203034c {
                        compatible = "allwinner,rpaf-dsp0";
                        device_type = "sunxi_rpaf_dsp0";
                        dsp_id = <0x0>;
                        status = "okay";
                };

                /* dmic addr: 0x02031000, the others is invalid to avoid build warining */
                dmic:dmic@2031000{
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-dmic";
                        reg = <0x0 0x02031000 0x0 0x50>;
                        clocks = <&ccu CLK_PLL_AUDIO0>, /* 98.304M / 90.3168M */
                                 <&ccu CLK_DMIC>,
                                 <&ccu CLK_BUS_DMIC>;
                        clock-names = "pll_audio", "dmic", "dmic_bus";
                        resets = <&ccu RST_BUS_DMIC>;
                        dmas            = <&dma 8>;
                        dma-names       = "rx";
                        interrupts      = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
                        clk_parent      = <0x1>;
                        capture_cma     = <256>;
                        data_vol        = <0xB0>;
                        rx_chmap        = <0x76543210>;
                        rx_sync_en      = <0x00>;
                        device_type = "dmic";
                        status = "disabled";
                };

                dmic_codec:sound@2031050{
                        #sound-dai-cells = <0>;
                        compatible = "dmic-codec";
                        reg = <0x0 0x02031050 0x0 0x4>;
                        num-channels = <8>;
                };

                sounddmic:sounddmic@2031060 {
                        reg = <0x0 0x02031060 0x0 0x4>;
                        compatible = "sunxi,simple-audio-card";
                        simple-audio-card,name = "snddmic";
                        simple-audio-card,capture_only;
                        status = "disabled";
                        /* simple-audio-card,format = "i2s"; */
                        simple-audio-card,cpu {
                                sound-dai = <&dmic>;
                        };
                        simple-audio-card,codec {
                                sound-dai = <&dmic_codec>;
                        };
                };

                /* daudio0 addr: 0x02032000, the others is invalid to avoid build warining */
                daudio0:daudio@2032000 {
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-daudio";
                        reg = <0x0 0x02032000 0x0 0xa0>;
                        clocks = <&ccu CLK_PLL_AUDIO0>, /* 98.304M / 90.3168M */
                                 <&ccu CLK_I2S0>,
                                 <&ccu CLK_BUS_I2S0>;
                        clock-names = "pll_audio", "i2s0", "i2s0_bus";
                        resets = <&ccu RST_BUS_I2S0>;
                        dmas            = <&dma 3>, <&dma 3>;
                        dma-names       = "tx", "rx";
                        interrupts      = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
                        pinctrl_used            = <0x01>;
                        sign_extend             = <0x00>;
                        tx_data_mode            = <0x00>;
                        rx_data_mode            = <0x00>;
                        msb_lsb_first           = <0x00>;
                        pcm_lrck_period         = <0x80>;
                        slot_width_select       = <0x20>;
                        frametype               = <0x00>;
                        tdm_config              = <0x01>;
                        tdm_num                 = <0x00>;
                        mclk_div                = <0x00>;
                        clk_parent              = <0x00>;
                        capture_cma             = <128>;
                        playback_cma            = <128>;
                        tx_num                  = <4>;
                        tx_chmap1               = <0x76543210>;
                        tx_chmap0               = <0xFEDCBA98>;
                        rx_num                  = <4>;
                        rx_chmap3               = <0x03020100>;
                        rx_chmap2               = <0x07060504>;
                        rx_chmap1               = <0x0B0A0908>;
                        rx_chmap0               = <0x0F0E0D0C>;
                        asrc_function_en        = <0x00>;
                        rx_sync_en              = <0x00>;
                        device_type = "daudio0";
                        status = "disabled";
                };

                sounddaudio0: sounddaudio0@20320a0 {
                        reg = <0x0 0x020320a0 0x0 0x4>;
                        compatible = "sunxi,simple-audio-card";
                        simple-audio-card,name = "snddaudio0";
                        simple-audio-card,format = "i2s";
                        status = "disabled";
                        /* simple-audio-card,frame-master = <&daudio0_master>; */
                        /* simple-audio-card,bitclock-master = <&daudio0_master>; */
                        /* simple-audio-card,bitclock-inversion; */
                        /* simple-audio-card,frame-inversion; */
                        simple-audio-card,cpu {
                                sound-dai = <&daudio0>;
                        };
                };

                /* daudio1 addr: 0x02033000, the others is invalid to avoid build warining */
                daudio1:daudio@2033000 {
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-daudio";
                        reg = <0x0 0x02033000 0x0 0xa0>;
                        clocks = <&ccu CLK_PLL_AUDIO0>, /* 98.304M / 90.3168M */
                                 <&ccu CLK_I2S1>,
                                 <&ccu CLK_BUS_I2S1>;
                        clock-names = "pll_audio", "i2s1", "i2s1_bus";
                        resets = <&ccu RST_BUS_I2S1>;
                        dmas            = <&dma 4>, <&dma 4>;
                        dma-names       = "tx", "rx";
                        interrupts      = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
                        pinctrl_used            = <0x01>;
                        sign_extend             = <0x00>;
                        tx_data_mode            = <0x00>;
                        rx_data_mode            = <0x00>;
                        msb_lsb_first           = <0x00>;
                        pcm_lrck_period         = <0x80>;
                        slot_width_select       = <0x20>;
                        frametype               = <0x00>;
                        tdm_config              = <0x01>;
                        tdm_num                 = <0x01>;
                        mclk_div                = <0x00>;
                        clk_parent              = <0x00>;
                        capture_cma             = <128>;
                        playback_cma            = <128>;
                        tx_num                  = <4>;
                        tx_chmap1               = <0x76543210>;
                        tx_chmap0               = <0xFEDCBA98>;
                        rx_num                  = <4>;
                        rx_chmap3               = <0x03020100>;
                        rx_chmap2               = <0x07060504>;
                        rx_chmap1               = <0x0B0A0908>;
                        rx_chmap0               = <0x0F0E0D0C>;
                        asrc_function_en        = <0x00>;
                        rx_sync_en              = <0x00>;
                        device_type = "daudio1";
                        status = "disabled";
                };

                sounddaudio1: sounddaudio1@20330a0 {
                        reg = <0x0 0x020330a0 0x0 0x4>;
                        compatible = "sunxi,simple-audio-card";
                        simple-audio-card,name = "snddaudio1";
                        simple-audio-card,format = "i2s";
                        status = "disabled";
                        simple-audio-card,cpu {
                                sound-dai = <&daudio1>;
                        };
                };

                /* daudio2 addr: 0x02034000, the others is invalid to avoid build warining */
                daudio2:daudio@2034000 {
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-daudio";
                        reg = <0x0 0x02034000 0x0 0xa0>;
                        clocks = <&ccu CLK_PLL_AUDIO0>, /* 98.304M / 90.3168M */
                                 <&ccu CLK_I2S2>,
                                 <&ccu CLK_BUS_I2S2>,
                                 <&ccu CLK_PLL_AUDIO0_4X>,
                                 <&ccu CLK_I2S2_ASRC>;
                        resets = <&ccu RST_BUS_I2S2>;
                        dmas            = <&dma 5>, <&dma 5>;
                        dma-names       = "tx", "rx";
                        interrupts      = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
                        pinctrl_used            = <0x01>;
                        daudio_type             = <0x00>;
                        sign_extend             = <0x00>;
                        tx_data_mode            = <0x00>;
                        rx_data_mode            = <0x00>;
                        msb_lsb_first           = <0x00>;
                        pcm_lrck_period         = <0x80>;
                        slot_width_select       = <0x20>;
                        frametype               = <0x00>;
                        tdm_config              = <0x01>;
                        tdm_num                 = <0x02>;
                        mclk_div                = <0x01>;
                        clk_parent              = <0x00>;
                        capture_cma             = <128>;
                        playback_cma            = <128>;
                        tx_num                  = <4>;
                        tx_chmap1               = <0x76543210>;
                        tx_chmap0               = <0xFEDCBA98>;
                        rx_num                  = <4>;
                        rx_chmap3               = <0x03020100>;
                        rx_chmap2               = <0x07060504>;
                        rx_chmap1               = <0x0B0A0908>;
                        rx_chmap0               = <0x0F0E0D0C>;
                        asrc_function_en        = <0x00>;
                        rx_sync_en              = <0x00>;
                        device_type = "daudio2";
                        status = "disabled";
                };

                sounddaudio2: sounddaudio2@20340a0 {
                        reg = <0x0 0x020340a0 0x0 0x4>;
                        compatible = "sunxi,simple-audio-card";
                        simple-audio-card,name = "snddaudio2";
                        simple-audio-card,format = "i2s";
                        status = "disabled";
                        simple-audio-card,cpu {
                                sound-dai = <&daudio2>;
                        };
                };

                hdmiaudio: hdmiaudio@20340a4 {
                        #sound-dai-cells = <0>;
                        reg = <0x0 0x020340a4 0x0 0x4>;
                        compatible = "allwinner,sunxi-hdmiaudio";
                        status = "disabled";
                };

                /* spdif addr: 0x02036000, the others is invalid to avoid build warining */
                spdif:spdif@2036000 {
                        #sound-dai-cells = <0>;
                        compatible = "allwinner,sunxi-spdif";
                        reg = <0x0 0x02036000 0x0 0x58>;
                        clocks = <&ccu CLK_PLL_AUDIO0_4X>,      /* 90.3168M */
                                 <&ccu CLK_SPDIF_TX>,
                                 <&ccu CLK_BUS_SPDIF>,
                                 <&ccu CLK_PLL_AUDIO1>,         /* 98.304M */
                                 <&ccu CLK_PLL_AUDIO1_DIV5>,
                                 <&ccu CLK_PLL_PERIPH0>,
                                 <&ccu CLK_SPDIF_RX>;
                        clock-names = "pll_audio0", "spdif", "spdif_bus",
                                      "pll_audio1", "pll_audio1_div5",
                                      "pll_periph", "spdif_rx";
                        resets = <&ccu RST_BUS_SPDIF>;
                        dmas            = <&dma 2>, <&dma 2>;
                        dma-names       = "tx", "rx";
                        interrupts      = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
                        clk_parent      = <0x1>;
                        playback_cma    = <128>;
                        capture_cma     = <128>;
                        rx_sync_en      = <0>;
                        device_type = "spdif";
                        status = "disabled";
                };

                soundspdif:soundspdif@203605c {
                        reg = <0x0 0x0203605c 0x0 0x4>;
                        compatible = "sunxi,simple-audio-card";
                        simple-audio-card,name = "sndspdif";
                        status = "disabled";
                         /* simple-audio-card,format = "i2s"; */
                         simple-audio-card,cpu {
                                 sound-dai = <&spdif>;
                         };
                         simple-audio-card,codec {
                                 /*snd-soc-dummy*/
                         };
                };

                ths: ths@02009400 {
                        compatible = "allwinner,sun8iw20p1-ths";
                        reg = <0x0 0x02009400 0x0 0x400>;
                        clocks = <&ccu CLK_BUS_THS>;
                        clock-names = "bus";
                        resets = <&ccu RST_BUS_THS>;
                        nvmem-cells = <&ths_calib>;
                        nvmem-cell-names = "calibration";
                        #thermal-sensor-cells = <1>;
                };

                tvd: tvd@05c00000 {
                        compatible = "allwinner,sunxi-tvd";
                        reg = <0x0 0x05c00000 0x0 0x00010000>;/*tvd_top*/
                        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;

                        clocks = <&ccu CLK_BUS_TVD_TOP>,
                        <&ccu CLK_MBUS_TVIN>;
                        clock-names = "clk_bus_tvd_top",
                        "clk_mbus_tvd";

                        resets = <&ccu RST_BUS_TVD_TOP>;
                        reset-names = "rst_bus_tvd_top";

                        tvd-number = <1>;
                        tvds = <&tvd0>;
                        status = "okay";
                };

                tvd0: tvd0@05c01000 {
                        compatible = "allwinner,sunxi-tvd0";
                        reg = <0x0 0x05c01000 0x0 0x00010000>;
                        interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;

                        clocks = <&ccu CLK_TVD>,
                        <&ccu CLK_BUS_TVD>;
                        clock-names = "clk_tvd0","clk_bus_tvd0";

                        resets = <&ccu RST_BUS_TVD>;
                        reset-names = "rst_bus_tvd0";

                        assigned-clocks = <&ccu CLK_TVD>;
                        assigned-clock-parents = <&ccu CLK_PLL_VIDEO1>;

                        tvd_used = <1>;
                        tvd_if = <0>;
                        status = "okay";
                };

        };
};

默

@awwwwa 感谢大佬。是RT内核。我打开了 initcall_debug，看起来应该不是uart的问题。

[30]HELLO! BOOT0 is starting!
[33]BOOT0 commit : adaf1174cc
[36]set pll start
[42]periph0 has been enabled
[45]set pll end
[46][pmu]: bus read error
[49]board init ok
[51]ZQ value = 0x2f
[53]get_pmu_exist() = -1
[55]ddr_efuse_type: 0xa
[58]trefi:7.8ms
[60][AUTO DEBUG] single rank and full DQ!
[64]ddr_efuse_type: 0xa
[67]trefi:7.8ms
[69][AUTO DEBUG] rank 0 row = 13
[72][AUTO DEBUG] rank 0 bank = 8
[75][AUTO DEBUG] rank 0 page size = 2 KB
[79]DRAM BOOT DRIVE INFO: V0.33
[83]DRAM CLK = 936 MHz
[85]DRAM Type = 3 (2:DDR2,3:DDR3)
[88]DRAMC read ODT  off.
[91]DRAM ODT value: 0x42.
[93]ddr_efuse_type: 0xa
[96]DRAM SIZE =128 M
[98]dram_tpr4:0x0
[100]PLL_DDR_CTRL_REG:0xf8004d00
[103]DRAM_CLK_REG:0xc0000000
[106][TIMING DEBUG] MR2= 0x20
[114]DRAM simple test OK.
[116]rtc standby flag is 0x0, super standby flag is 0x0
[121]dram size =128
[124]card no is 0
[126]sdcard 0 line count 4
[128][mmc]: mmc driver ver 2021-05-21 14:47
[138][mmc]: Wrong media type 0x0
[141][mmc]: ***Try SD card 0***
[159][mmc]: HSSDR52/SDR25 4 bit
[162][mmc]: 50000000 Hz
[164][mmc]: 30436 MB
[166][mmc]: ***SD/MMC 0 init OK!!!***
[259]Loading boot-pkg Succeed(index=0).
[263]Entry_name        = u-boot
[270]Entry_name        = optee
[274]Entry_name        = dtb
[276]mmc not para
[278]Jump to second Boot.
M/TC: OP-TEE version: e9372c9c-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #2 Sat Mar 19 11:09:45 UTC 2022 arm


U-Boot 2018.05 (Nov 02 2023 - 00:18:09 +0800) Allwinner Technology

[00.331]CPU:   Allwinner Family
[00.334]Model: sun8iw20
[00.336]DRAM:  128 MiB
[00.340]Relocation Offset is: 04ec8000
[00.365]secure enable bit: 0
E/TC:0   tee_read_fdt:433 fine node /firmware/optee failed with FDT_ERR_NOTFOUND
[00.377]smc_tee_inform_fdt failed with: -65536[00.381]CPU=480 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.388]gic: sec monitor mode
[00.391]flash init start
[00.393]workmode = 0,storage type = 1
[00.396][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.402][mmc]: get sdc_type fail and use default host:tm1.
[00.409][mmc]: can't find node "mmc0",will add new node
[00.414][mmc]: fdt err returned <no error>
[00.417][mmc]: Using default timing para
[00.421][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.447][mmc]: card_caps:0x3000000a
[00.450][mmc]: host_caps:0x3000003f
[00.459]sunxi flash init ok
[00.461]line:703 init_clocks
[00.464]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.489]drv_disp_init finish
[00.504]Loading Environment from SUNXI_FLASH... OK
[00.526]boot_gui_init:start
[00.529]set disp.dev2_output_type fail. using defval=0
[00.537]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[00.552]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[00.597]Item0 (Map) magic is bad
[00.600]the secure storage item0 copy0 magic is bad
[00.632]Item0 (Map) magic is bad
[00.635]the secure storage item0 copy1 magic is bad
[00.639]Item0 (Map) magic is bad
[00.642]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.662]update part info
[00.665]update bootcmd
[00.668]change working_fdt 0x43e77e70 to 0x43e47e70
disable nand error: FDT_ERR_BADPATH
[00.709]update dts
FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.728]LCD open finish
Hit any key to stop autoboot:  0
[02.166]no vendor_boot partition is found
Android's image name: sun8i_arm
[02.180]Starting kernel ...

[02.183][mmc]: MMC Device 2 not found
[02.186][mmc]: mmc 2 not find, so not exit
[    0.000000] 000: printk: bootconsole [earlycon0] enabled
[    0.000000] 000: Memory policy: Data cache writealloc
[    0.000000] 000: cma: Reserved 4 MiB at 0x47c00000
[    0.000000] 000: On node 0 totalpages: 32768
[    0.000000] 000:   Normal zone: 288 pages used for memmap
[    0.000000] 000:   Normal zone: 0 pages reserved
[    0.000000] 000:   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] 000: psci: probing for conduit method from DT.
[    0.000000] 000: psci: PSCIv1.0 detected in firmware.
[    0.000000] 000: psci: Using standard PSCI v0.2 function IDs
[    0.000000] 000: psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] 000: psci: SMC Calling Convention v1.0
[    0.000000] 000: percpu: Embedded 11 pages/cpu s15488 r8192 d21376 u45056
[    0.000000] 000: pcpu-alloc: s15488 r8192 d21376 u45056 alloc=11*4096
[    0.000000] 000:
[    0.000000] 000: pcpu-alloc:
[    0.000000] 000: [0]
[    0.000000] 000: 0
[    0.000000] 000: [0]
[    0.000000] 000: 1
[    0.000000] 000:
[    0.000000] 000: Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] 000: Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=1 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:private@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05(11/02/2023-00:18:09) mbr_offset=1032192 disp_reserve=1536000,0x43f12000 androidboot.dramsize=128
[    0.000000] 000: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000000] 000: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] 000: mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] 000: Memory: 104412K/131072K available (6144K kernel code, 478K rwdata, 2832K rodata, 1024K init, 358K bss, 22564K reserved, 4096K cma-reserved, 0K highmem)
[    0.000000] 000: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] 000: rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 000: rcu:        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 000: rcu:        RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 000: rcu:        RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.000000] 000:     No expedited grace period (rcu_normal_after_boot).
[    0.000000] 000:     Tasks RCU enabled.
[    0.000000] 000: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] 000: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 000: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] 000: random: get_random_bytes called from start_kernel+0x1c7/0x318 with crng_init=0
[    0.000000] 000: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] 000: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] 000: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008461] 000: Switching to timer-based delay loop, resolution 41ns
[    0.015201] 000: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.025995] 000: Console: colour dummy device 80x30
[    0.030923] 000: Calibrating delay loop (skipped), value calculated using timer frequency..
[    0.039375] 000: 48.00 BogoMIPS (lpj=240000)
[    0.043646] 000: pid_max: default: 32768 minimum: 301
[    0.049063] 000: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.056843] 000: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.066984] 000: CPU: Testing write buffer coherency:
[    0.072196] 000: ok
[    0.074872] 000: /cpus/cpu@0 missing clock-frequency property
[    0.080706] 000: /cpus/cpu@1 missing clock-frequency property
[    0.086464] 000: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093852] 000: calling  cpu_suspend_alloc_sp+0x1/0x68 @ 1
[    0.099448] 000: initcall cpu_suspend_alloc_sp+0x1/0x68 returned 0 after 0 usecs
[    0.106940] 000: calling  init_static_idmap+0x1/0xc4 @ 1
[    0.112299] 000: Setting up static identity map for 0x40100000 - 0x40100054
[    0.119293] 000: initcall init_static_idmap+0x1/0xc4 returned 0 after 9765 usecs
[    0.126711] 000: calling  spawn_ksoftirqd+0x1/0x4c @ 1
[    0.132112] 000: initcall spawn_ksoftirqd+0x1/0x4c returned 0 after 0 usecs
[    0.139092] 000: calling  migration_init+0x1/0x30 @ 1
[    0.144220] 000: initcall migration_init+0x1/0x30 returned 0 after 0 usecs
[    0.151119] 000: calling  srcu_bootup_announce+0x1/0x2c @ 1
[    0.156765] 000: rcu: Hierarchical SRCU implementation.
[    0.161987] 000: initcall srcu_bootup_announce+0x1/0x2c returned 0 after 0 usecs
[    0.169472] 000: calling  rcu_sysrq_init+0x1/0x18 @ 1
[    0.174530] 000: initcall rcu_sysrq_init+0x1/0x18 returned 0 after 0 usecs
[    0.181464] 000: calling  check_cpu_stall_init+0x1/0x18 @ 1
[    0.187055] 000: initcall check_cpu_stall_init+0x1/0x18 returned 0 after 0 usecs
[    0.194526] 000: calling  rcu_spawn_gp_kthread+0x1/0x100 @ 1
[    0.200612] 000: initcall rcu_spawn_gp_kthread+0x1/0x100 returned 0 after 0 usecs
[    0.208206] 000: calling  rcu_spawn_core_kthreads+0x1/0x74 @ 1
[    0.214268] 000: initcall rcu_spawn_core_kthreads+0x1/0x74 returned 0 after 0 usecs
[    0.222094] 000: calling  posix_cpu_thread_init+0x1/0x58 @ 1
[    0.228004] 000: initcall posix_cpu_thread_init+0x1/0x58 returned 0 after 0 usecs
[    0.235678] 000: calling  cpu_stop_init+0x1/0x6c @ 1
[    0.240893] 000: initcall cpu_stop_init+0x1/0x6c returned 0 after 0 usecs
[    0.247828] 000: calling  mbus_init+0x1/0xcc @ 1
[    0.252661] 000: initcall mbus_init+0x1/0xcc returned 0 after 0 usecs
[    0.259198] 000: calling  init_boot_event+0x1/0x48 @ 1
[    0.264361] 000: BOOTEVENT:       264.360998: ON
[    0.269003] 000: initcall init_boot_event+0x1/0x48 returned 0 after 0 usecs
[    0.276062] 000: calling  dummy_timer_register+0x1/0x24 @ 1
[    0.281652] 000: initcall dummy_timer_register+0x1/0x24 returned 0 after 0 usecs
[    0.289127] 000: calling  initialize_ptr_random+0x1/0x38 @ 1
[    0.294808] 000: initcall initialize_ptr_random+0x1/0x38 returned 0 after 0 usecs
[    0.302712] 000: smp: Bringing up secondary CPUs ...
[    0.310045] 001: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.316450] 000: smp: Brought up 1 node, 2 CPUs
[    0.320986] 000: SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.327713] 000: CPU: All CPU(s) started in SVC mode.
[    0.333810] 001: devtmpfs: initialized
[    0.371093] 000: calling  ipc_ns_init+0x1/0x10 @ 1
[    0.375949] 000: initcall ipc_ns_init+0x1/0x10 returned 0 after 0 usecs
[    0.382685] 000: calling  init_mmap_min_addr+0x1/0x14 @ 1
[    0.388095] 000: initcall init_mmap_min_addr+0x1/0x14 returned 0 after 0 usecs
[    0.395401] 000: calling  net_ns_init+0x1/0xd4 @ 1
[    0.400660] 001: initcall net_ns_init+0x1/0xd4 returned 0 after 0 usecs
[    0.408719] 001: calling  vfp_init+0x1/0x14c @ 1
[    0.413441] 001: VFP support v0.3:
[    0.416938] 001: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.423526] 001: initcall vfp_init+0x1/0x14c returned 0 after 9765 usecs
[    0.430269] 001: calling  ptrace_break_init+0x1/0x24 @ 1
[    0.435665] 001: initcall ptrace_break_init+0x1/0x24 returned 0 after 0 usecs
[    0.442804] 001: calling  register_cpufreq_notifier+0x1/0xc @ 1
[    0.448786] 001: initcall register_cpufreq_notifier+0x1/0xc returned 0 after 0 usecs
[    0.456541] 001: calling  v6_userpage_init+0x1/0x4 @ 1
[    0.461733] 001: initcall v6_userpage_init+0x1/0x4 returned 0 after 0 usecs
[    0.468717] 001: calling  cpu_hotplug_pm_sync_init+0x1/0x10 @ 1
[    0.474702] 001: initcall cpu_hotplug_pm_sync_init+0x1/0x10 returned 0 after 0 usecs
[    0.482467] 001: calling  alloc_frozen_cpus+0x1/0x4 @ 1
[    0.487755] 001: initcall alloc_frozen_cpus+0x1/0x4 returned 0 after 0 usecs
[    0.494816] 001: calling  wq_sysfs_init+0x1/0x24 @ 1
[    0.500230] 001: initcall wq_sysfs_init+0x1/0x24 returned 0 after 0 usecs
[    0.507112] 001: calling  ksysfs_init+0x1/0x68 @ 1
[    0.512087] 001: initcall ksysfs_init+0x1/0x68 returned 0 after 0 usecs
[    0.518730] 001: calling  sugov_register+0x1/0xc @ 1
[    0.523767] 001: initcall sugov_register+0x1/0xc returned 0 after 0 usecs
[    0.530632] 001: calling  pm_init+0x1/0x50 @ 1
[    0.535540] 001: initcall pm_init+0x1/0x50 returned 0 after 0 usecs
[    0.541818] 001: calling  rcu_spawn_tasks_kthread+0x1/0x64 @ 1
[    0.547942] 000: initcall rcu_spawn_tasks_kthread+0x1/0x64 returned 0 after 0 usecs
[    0.555610] 000: calling  rcu_set_runtime_mode+0x1/0x10 @ 1
[    0.561297] 000: initcall rcu_set_runtime_mode+0x1/0x10 returned 0 after 0 usecs
[    0.568718] 000: calling  dma_init_reserved_memory+0x1/0x3c @ 1
[    0.574773] 000: initcall dma_init_reserved_memory+0x1/0x3c returned -12 after 0 usecs
[    0.582696] 000: calling  init_jiffies_clocksource+0x1/0x10 @ 1
[    0.588723] 000: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.599089] 000: initcall init_jiffies_clocksource+0x1/0x10 returned 0 after 9765 usecs
[    0.607151] 000: calling  futex_init+0x1/0xdc @ 1
[    0.611968] 000: futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.619254] 000: initcall futex_init+0x1/0xdc returned 0 after 0 usecs
[    0.625942] 000: calling  cgroup_wq_init+0x1/0x20 @ 1
[    0.631076] 000: initcall cgroup_wq_init+0x1/0x20 returned 0 after 0 usecs
[    0.638046] 000: calling  cgroup1_wq_init+0x1/0x20 @ 1
[    0.643261] 000: initcall cgroup1_wq_init+0x1/0x20 returned 0 after 0 usecs
[    0.650325] 000: calling  cpu_pm_init+0x1/0x10 @ 1
[    0.655126] 000: initcall cpu_pm_init+0x1/0x10 returned 0 after 0 usecs
[    0.661798] 000: calling  init_zero_pfn+0x1/0x34 @ 1
[    0.666795] 000: initcall init_zero_pfn+0x1/0x34 returned 0 after 0 usecs
[    0.673657] 000: calling  cma_init_reserved_areas+0x1/0x158 @ 1
[    0.679922] 000: initcall cma_init_reserved_areas+0x1/0x158 returned 0 after 0 usecs
[    0.687738] 000: calling  fsnotify_init+0x1/0x3c @ 1
[    0.692774] 000: initcall fsnotify_init+0x1/0x3c returned 0 after 0 usecs
[    0.699644] 000: calling  filelock_init+0x1/0x9c @ 1
[    0.704683] 000: initcall filelock_init+0x1/0x9c returned 0 after 0 usecs
[    0.711559] 000: calling  init_script_binfmt+0x1/0x14 @ 1
[    0.716972] 000: initcall init_script_binfmt+0x1/0x14 returned 0 after 0 usecs
[    0.724263] 000: calling  init_elf_binfmt+0x1/0x14 @ 1
[    0.729423] 000: initcall init_elf_binfmt+0x1/0x14 returned 0 after 0 usecs
[    0.736453] 000: calling  configfs_init+0x1/0x6c @ 1
[    0.741513] 000: initcall configfs_init+0x1/0x6c returned 0 after 0 usecs
[    0.748375] 000: calling  debugfs_init+0x1/0x3c @ 1
[    0.753302] 000: initcall debugfs_init+0x1/0x3c returned 0 after 0 usecs
[    0.760076] 000: calling  prandom_init+0x1/0xb4 @ 1
[    0.764974] 000: initcall prandom_init+0x1/0xb4 returned 0 after 0 usecs
[    0.771750] 000: calling  pinctrl_init+0x1/0x8c @ 1
[    0.776633] 000: pinctrl core: initialized pinctrl subsystem
[    0.782595] 000: initcall pinctrl_init+0x1/0x8c returned 0 after 9765 usecs
[    0.789603] 000: calling  gpiolib_dev_init+0x1/0x94 @ 1
[    0.795054] 000: initcall gpiolib_dev_init+0x1/0x94 returned 0 after 0 usecs
[    0.802185] 000: calling  sunxi_rtc_ccu_init+0x1/0x20 @ 1
[    0.807798] 000: initcall sunxi_rtc_ccu_init+0x1/0x20 returned 0 after 0 usecs
[    0.815046] 000: calling  sunxi_ccu_sun8iw20_init+0x1/0x20 @ 1
[    0.821088] 000: initcall sunxi_ccu_sun8iw20_init+0x1/0x20 returned 0 after 0 usecs
[    0.828752] 000: calling  sun8iw20_rtc_ccu_init+0x1/0x20 @ 1
[    0.834618] 000: initcall sun8iw20_rtc_ccu_init+0x1/0x20 returned 0 after 0 usecs
[    0.842118] 000: calling  sunxi_r_ccu_sun8iw20_init+0x1/0x20 @ 1
[    0.848324] 000: initcall sunxi_r_ccu_sun8iw20_init+0x1/0x20 returned 0 after 0 usecs
[    0.856190] 000: calling  virtio_init+0x1/0x1c @ 1
[    0.861226] 000: initcall virtio_init+0x1/0x1c returned 0 after 0 usecs
[    0.867870] 000: calling  regulator_init+0x1/0x78 @ 1
[    0.874373] 000: probe of reg-dummy returned 1 after 0 usecs
[    0.880147] 000: initcall regulator_init+0x1/0x78 returned 0 after 0 usecs
[    0.887184] 000: calling  iommu_init+0x1/0x28 @ 1
[    0.891981] 000: initcall iommu_init+0x1/0x28 returned 0 after 0 usecs
[    0.898604] 000: calling  component_debug_init+0x1/0x1c @ 1
[    0.904235] 000: initcall component_debug_init+0x1/0x1c returned 0 after 0 usecs
[    0.911817] 000: calling  register_cpufreq_notifier+0x1/0x28 @ 1
[    0.917850] 000: initcall register_cpufreq_notifier+0x1/0x28 returned -22 after 0 usecs
[    0.925977] 000: calling  opp_debug_init+0x1/0x1c @ 1
[    0.931129] 000: initcall opp_debug_init+0x1/0x1c returned 0 after 0 usecs
[    0.938096] 000: calling  cpufreq_core_init+0x1/0x34 @ 1
[    0.943455] 000: initcall cpufreq_core_init+0x1/0x34 returned 0 after 0 usecs
[    0.950694] 000: calling  cpufreq_gov_performance_init+0x1/0xc @ 1
[    0.956884] 000: initcall cpufreq_gov_performance_init+0x1/0xc returned 0 after 0 usecs
[    0.964973] 000: calling  sock_init+0x1/0x78 @ 1
[    0.970059] 000: initcall sock_init+0x1/0x78 returned 0 after 0 usecs
[    0.976718] 000: calling  net_inuse_init+0x1/0x1c @ 1
[    0.981869] 000: initcall net_inuse_init+0x1/0x1c returned 0 after 0 usecs
[    0.988851] 000: calling  net_defaults_init+0x1/0x1c @ 1
[    0.994194] 000: initcall net_defaults_init+0x1/0x1c returned 0 after 0 usecs
[    1.001512] 000: calling  init_default_flow_dissectors+0x1/0x48 @ 1
[    1.007811] 000: initcall init_default_flow_dissectors+0x1/0x48 returned 0 after 0 usecs
[    1.015996] 000: calling  netlink_proto_init+0x1/0xe4 @ 1
[    1.021657] 000: NET: Registered protocol family 16
[    1.026715] 000: initcall netlink_proto_init+0x1/0xe4 returned 0 after 9765 usecs
[    1.035674] 000: calling  atomic_pool_init+0x1/0x124 @ 1
[    1.046652] 000: DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.054046] 000: initcall atomic_pool_init+0x1/0x124 returned 0 after 9765 usecs
[    1.061473] 000: calling  irq_sysfs_init+0x1/0x5c @ 1
[    1.068235] 000: initcall irq_sysfs_init+0x1/0x5c returned 0 after 0 usecs
[    1.075130] 000: calling  bdi_class_init+0x1/0x34 @ 1
[    1.080457] 000: initcall bdi_class_init+0x1/0x34 returned 0 after 0 usecs
[    1.087345] 000: calling  mm_sysfs_init+0x1/0x28 @ 1
[    1.092423] 000: initcall mm_sysfs_init+0x1/0x28 returned 0 after 0 usecs
[    1.099270] 000: calling  init_per_zone_wmark_min+0x1/0x50 @ 1
[    1.105236] 000: initcall init_per_zone_wmark_min+0x1/0x50 returned 0 after 0 usecs
[    1.112918] 000: calling  gpiolib_sysfs_init+0x1/0x68 @ 1
[    1.118620] 000: initcall gpiolib_sysfs_init+0x1/0x68 returned 0 after 0 usecs
[    1.125863] 000: calling  tty_class_init+0x1/0x2c @ 1
[    1.131082] 000: initcall tty_class_init+0x1/0x2c returned 0 after 0 usecs
[    1.137983] 000: calling  vtconsole_class_init+0x1/0xa8 @ 1
[    1.144239] 000: initcall vtconsole_class_init+0x1/0xa8 returned 0 after 0 usecs
[    1.151667] 000: calling  iommu_dev_init+0x1/0x10 @ 1
[    1.156906] 000: initcall iommu_dev_init+0x1/0x10 returned 0 after 0 usecs
[    1.163855] 000: calling  devlink_class_init+0x1/0x2c @ 1
[    1.169436] 000: initcall devlink_class_init+0x1/0x2c returned 0 after 0 usecs
[    1.176675] 000: calling  software_node_init+0x1/0x2c @ 1
[    1.182302] 000: initcall software_node_init+0x1/0x2c returned 0 after 0 usecs
[    1.189552] 000: calling  wakeup_sources_debugfs_init+0x1/0x24 @ 1
[    1.195876] 000: initcall wakeup_sources_debugfs_init+0x1/0x24 returned 0 after 0 usecs
[    1.203947] 000: calling  wakeup_sources_sysfs_init+0x1/0x24 @ 1
[    1.210131] 000: initcall wakeup_sources_sysfs_init+0x1/0x24 returned 0 after 0 usecs
[    1.217970] 000: calling  regmap_initcall+0x1/0xc @ 1
[    1.223252] 000: initcall regmap_initcall+0x1/0xc returned 0 after 0 usecs
[    1.230154] 000: calling  spi_init+0x1/0x58 @ 1
[    1.235033] 000: initcall spi_init+0x1/0x58 returned 0 after 0 usecs
[    1.241461] 000: calling  i2c_init+0x1/0x80 @ 1
[    1.246385] 000: initcall i2c_init+0x1/0x80 returned 0 after 0 usecs
[    1.252771] 000: calling  rpmsg_init+0x1/0x28 @ 1
[    1.257818] 000: initcall rpmsg_init+0x1/0x28 returned 0 after 0 usecs
[    1.264359] 000: calling  rpmsg_char_init+0x1/0x84 @ 1
[    1.269782] 000: initcall rpmsg_char_init+0x1/0x84 returned 0 after 0 usecs
[    1.276771] 000: calling  kobject_uevent_init+0x1/0xc @ 1
[    1.282330] 000: initcall kobject_uevent_init+0x1/0xc returned 0 after 0 usecs
[    1.291033] 000: calling  gate_vma_init+0x1/0x48 @ 1
[    1.296123] 000: initcall gate_vma_init+0x1/0x48 returned 0 after 0 usecs
[    1.302940] 000: calling  customize_machine+0x1/0x14 @ 1
[    1.308346] 000: initcall customize_machine+0x1/0x14 returned 0 after 0 usecs
[    1.315503] 000: calling  exceptions_init+0x1/0x58 @ 1
[    1.320753] 000: initcall exceptions_init+0x1/0x58 returned 0 after 0 usecs
[    1.327731] 000: calling  cryptomgr_init+0x1/0xc @ 1
[    1.332803] 000: initcall cryptomgr_init+0x1/0xc returned 0 after 0 usecs
[    1.339617] 000: calling  dma_bus_init+0x1/0x68 @ 1
[    1.344729] 000: initcall dma_bus_init+0x1/0x68 returned 0 after 0 usecs
[    1.351440] 000: calling  dma_channel_table_init+0x1/0xa0 @ 1
[    1.357347] 000: initcall dma_channel_table_init+0x1/0xa0 returned 0 after 0 usecs
[    1.364931] 000: calling  iommu_dma_init+0x1/0x4 @ 1
[    1.370030] 000: initcall iommu_dma_init+0x1/0x4 returned 0 after 0 usecs
[    1.376835] 000: calling  of_platform_default_populate_init+0x1/0x72 @ 1
[    1.390413] 000: probe of 7090000.rtc_ccu returned -517 after 0 usecs
[    1.397478] 000: probe of 2001000.ccu returned -517 after 0 usecs
[    1.404013] 000: probe of 7010000.r_ccu returned -517 after 0 usecs
[    1.483803] 001: rtc_ccu: sunxi ccu init OK
[    1.488140] 001: probe of 7090000.rtc_ccu returned 1 after 0 usecs
[    1.499463] 001: ccu: sunxi ccu init OK
[    1.503624] 001: probe of 2001000.ccu returned 1 after 10000 usecs
[    1.510878] 001: r_ccu: sunxi ccu init OK
[    1.515041] 001: probe of 7010000.r_ccu returned 1 after 10000 usecs
[    1.523612] 001: initcall of_platform_default_populate_init+0x1/0x72 returned 0 after 126953 usecs
[    1.534356] 001: calling  topology_init+0x1/0x48 @ 1
[    1.540021] 001: initcall topology_init+0x1/0x48 returned 0 after 0 usecs
[    1.546941] 001: calling  uid_cache_init+0x1/0x5c @ 1
[    1.552066] 001: initcall uid_cache_init+0x1/0x5c returned 0 after 0 usecs
[    1.559101] 001: calling  param_sysfs_init+0x1/0x14c @ 1
[    1.618903] 001: initcall param_sysfs_init+0x1/0x14c returned 0 after 48828 usecs
[    1.626926] 001: calling  user_namespace_sysctl_init+0x1/0x2c @ 1
[    1.633122] 001: initcall user_namespace_sysctl_init+0x1/0x2c returned 0 after 0 usecs
[    1.641749] 000: calling  pm_sysrq_init+0x1/0x14 @ 1
[    1.646876] 001: initcall pm_sysrq_init+0x1/0x14 returned 0 after 0 usecs
[    1.654552] 001: calling  create_proc_profile+0x1/0x94 @ 1
[    1.660067] 001: initcall create_proc_profile+0x1/0x94 returned 0 after 0 usecs
[    1.667498] 001: calling  cgroup_sysfs_init+0x1/0x14 @ 1
[    1.672881] 001: initcall cgroup_sysfs_init+0x1/0x14 returned 0 after 0 usecs
[    1.680174] 001: calling  cgroup_namespaces_init+0x1/0x4 @ 1
[    1.685845] 001: initcall cgroup_namespaces_init+0x1/0x4 returned 0 after 0 usecs
[    1.693456] 001: calling  dev_map_init+0x1/0x10 @ 1
[    1.698348] 001: initcall dev_map_init+0x1/0x10 returned 0 after 0 usecs
[    1.705160] 001: calling  oom_init+0x1/0x28 @ 1
[    1.709954] 001: initcall oom_init+0x1/0x28 returned 0 after 0 usecs
[    1.716420] 001: calling  cgwb_init+0x1/0x24 @ 1
[    1.721122] 001: initcall cgwb_init+0x1/0x24 returned 0 after 0 usecs
[    1.727664] 001: calling  default_bdi_init+0x1/0x78 @ 1
[    1.733534] 001: initcall default_bdi_init+0x1/0x78 returned 0 after 0 usecs
[    1.740739] 001: calling  percpu_enable_async+0x1/0x10 @ 1
[    1.746252] 001: initcall percpu_enable_async+0x1/0x10 returned 0 after 0 usecs
[    1.753658] 001: calling  init_reserve_notifier+0x1/0x4 @ 1
[    1.759284] 001: initcall init_reserve_notifier+0x1/0x4 returned 0 after 0 usecs
[    1.766793] 001: calling  init_admin_reserve+0x1/0x28 @ 1
[    1.772203] 001: initcall init_admin_reserve+0x1/0x28 returned 0 after 0 usecs
[    1.779527] 001: calling  init_user_reserve+0x1/0x28 @ 1
[    1.784847] 001: initcall init_user_reserve+0x1/0x28 returned 0 after 0 usecs
[    1.792074] 001: calling  swap_init_sysfs+0x1/0x4c @ 1
[    1.797264] 001: initcall swap_init_sysfs+0x1/0x4c returned 0 after 0 usecs
[    1.804336] 001: calling  swapfile_init+0x1/0x34 @ 1
[    1.809317] 001: initcall swapfile_init+0x1/0x34 returned 0 after 0 usecs
[    1.816209] 001: calling  mem_cgroup_init+0x1/0xc4 @ 1
[    1.821455] 001: initcall mem_cgroup_init+0x1/0xc4 returned 0 after 0 usecs
[    1.828509] 001: calling  rsa_init+0x1/0x28 @ 1
[    1.833321] 000: initcall rsa_init+0x1/0x28 returned 0 after 0 usecs
[    1.839749] 000: calling  crypto_cmac_module_init+0x1/0xc @ 1
[    1.845617] 000: initcall crypto_cmac_module_init+0x1/0xc returned 0 after 0 usecs
[    1.853204] 000: calling  hmac_module_init+0x1/0xc @ 1
[    1.858531] 000: initcall hmac_module_init+0x1/0xc returned 0 after 0 usecs
[    1.865501] 000: calling  crypto_null_mod_init+0x1/0x44 @ 1
[    1.872060] 000: initcall crypto_null_mod_init+0x1/0x44 returned 0 after 0 usecs
[    1.879482] 000: calling  sha256_generic_mod_init+0x1/0xc @ 1
[    1.885805] 000: initcall sha256_generic_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.893414] 000: calling  crypto_ecb_module_init+0x1/0xc @ 1
[    1.899215] 000: initcall crypto_ecb_module_init+0x1/0xc returned 0 after 0 usecs
[    1.906706] 000: calling  des_generic_mod_init+0x1/0xc @ 1
[    1.912727] 000: initcall des_generic_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.920050] 000: calling  aes_init+0x1/0xc @ 1
[    1.924849] 000: initcall aes_init+0x1/0xc returned 0 after 0 usecs
[    1.931138] 000: calling  arc4_init+0x1/0xc @ 1
[    1.936004] 000: initcall arc4_init+0x1/0xc returned 0 after 0 usecs
[    1.942394] 000: calling  deflate_mod_init+0x1/0x28 @ 1
[    1.948396] 000: initcall deflate_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.955477] 000: calling  crc32c_mod_init+0x1/0xc @ 1
[    1.960896] 000: initcall crc32c_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.967791] 000: calling  lzo_mod_init+0x1/0x28 @ 1
[    1.973234] 000: initcall lzo_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.979959] 000: calling  lzorle_mod_init+0x1/0x28 @ 1
[    1.985661] 000: initcall lzorle_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.992637] 000: calling  drbg_init+0x1/0x58 @ 1
[    1.999283] 000: initcall drbg_init+0x1/0x58 returned 0 after 0 usecs
[    2.005769] 000: calling  zstd_mod_init+0x1/0x28 @ 1
[    2.011331] 000: initcall zstd_mod_init+0x1/0x28 returned 0 after 0 usecs
[    2.018139] 000: calling  ecdh_init+0x1/0xa @ 1
[    2.023033] 000: initcall ecdh_init+0x1/0xa returned 0 after 0 usecs
[    2.029413] 000: calling  init_bio+0x1/0x74 @ 1
[    2.034210] 000: initcall init_bio+0x1/0x74 returned 0 after 0 usecs
[    2.040582] 000: calling  blk_settings_init+0x1/0x24 @ 1
[    2.046024] 000: initcall blk_settings_init+0x1/0x24 returned 0 after 0 usecs
[    2.053191] 000: calling  blk_ioc_init+0x1/0x28 @ 1
[    2.058205] 000: initcall blk_ioc_init+0x1/0x28 returned 0 after 0 usecs
[    2.064931] 000: calling  blk_softirq_init+0x1/0x64 @ 1
[    2.070287] 000: initcall blk_softirq_init+0x1/0x64 returned 0 after 0 usecs
[    2.077358] 000: calling  blk_mq_init+0x1/0x28 @ 1
[    2.082257] 000: initcall blk_mq_init+0x1/0x28 returned 0 after 0 usecs
[    2.088894] 000: calling  genhd_device_init+0x1/0x5c @ 1
[    2.094850] 000: initcall genhd_device_init+0x1/0x5c returned 0 after 0 usecs
[    2.102009] 000: calling  blkcg_init+0x1/0x28 @ 1
[    2.107405] 001: initcall blkcg_init+0x1/0x28 returned 0 after 0 usecs
[    2.114032] 001: calling  gpiolib_debugfs_init+0x1/0x24 @ 1
[    2.119738] 001: initcall gpiolib_debugfs_init+0x1/0x24 returned 0 after 0 usecs
[    2.127281] 001: calling  pwm_debugfs_init+0x1/0x24 @ 1
[    2.132556] 001: initcall pwm_debugfs_init+0x1/0x24 returned 0 after 0 usecs
[    2.139731] 001: calling  pwm_sysfs_init+0x1/0x10 @ 1
[    2.144859] 001: initcall pwm_sysfs_init+0x1/0x10 returned 0 after 0 usecs
[    2.151862] 001: calling  fbmem_init+0x1/0x98 @ 1
[    2.156679] 001: initcall fbmem_init+0x1/0x98 returned 0 after 0 usecs
[    2.163312] 001: calling  sun6i_dma_init+0x1/0xc @ 1
[    2.212820] 000: probe of 3002000.dma-controller returned 1 after 40000 usecs
[    2.221575] 000: initcall sun6i_dma_init+0x1/0xc returned 0 after 48828 usecs
[    2.228750] 000: calling  regulator_fixed_voltage_init+0x1/0xc @ 1
[    2.236156] 000: probe of pio-18 returned 1 after 0 usecs
[    2.242437] 000: probe of pio-33 returned 1 after 0 usecs
[    2.248622] 000: probe of usb1-vbus returned 0 after 0 usecs
[    2.254397] 000: initcall regulator_fixed_voltage_init+0x1/0xc returned 0 after 9765 usecs
[    2.262873] 000: calling  misc_init+0x1/0x88 @ 1
[    2.267619] 000: initcall misc_init+0x1/0x88 returned 0 after 0 usecs
[    2.274197] 000: calling  sunxi_di_init+0x1/0x1c @ 1
[    2.279198] 000: Deinterlace Module initialized.
[    2.284297] 000: probe of 5400000.deinterlace returned -517 after 0 usecs
[    2.291324] 000: initcall sunxi_di_init+0x1/0x1c returned 0 after 9765 usecs
[    2.298528] 000: calling  iommu_subsys_init+0x1/0x4c @ 1
[    2.303849] 000: iommu: Default domain type: Translated
[    2.309244] 000: initcall iommu_subsys_init+0x1/0x4c returned 0 after 9765 usecs
[    2.316659] 000: calling  sunxi_iommu_init+0x1/0xc @ 1
[    2.322256] 000: sunxi iommu: irq = 24
[    2.327238] 000: probe of 2010000.iommu returned 1 after 0 usecs
[    2.333863] 000: initcall sunxi_iommu_init+0x1/0xc returned 0 after 9765 usecs
[    2.341126] 000: calling  register_cpu_capacity_sysctl+0x1/0x50 @ 1
[    2.347564] 000: initcall register_cpu_capacity_sysctl+0x1/0x50 returned 0 after 0 usecs
[    2.355699] 000: calling  dma_buf_init+0x1/0x84 @ 1
[    2.360914] 000: initcall dma_buf_init+0x1/0x84 returned 0 after 0 usecs
[    2.367627] 000: calling  init_scsi+0x1/0x60 @ 1
[    2.373069] 000: SCSI subsystem initialized
[    2.377257] 000: initcall init_scsi+0x1/0x60 returned 0 after 0 usecs
[    2.383841] 000: calling  phy_init+0x1/0x148 @ 1
[    2.388812] 000: initcall phy_init+0x1/0x148 returned 0 after 0 usecs
[    2.395387] 000: calling  usb_common_init+0x1/0x1c @ 1
[    2.400571] 000: initcall usb_common_init+0x1/0x1c returned 0 after 0 usecs
[    2.407629] 000: calling  usb_init+0x1/0xd0 @ 1
[    2.412584] 000: usbcore: registered new interface driver usbfs
[    2.418830] 000: usbcore: registered new interface driver hub
[    2.424795] 000: usbcore: registered new device driver usb
[    2.430393] 000: initcall usb_init+0x1/0xd0 returned 0 after 19531 usecs
[    2.437141] 000: calling  usb_udc_init+0x1/0x3c @ 1
[    2.442186] 000: initcall usb_udc_init+0x1/0x3c returned 0 after 0 usecs
[    2.448906] 000: calling  usb_roles_init+0x1/0x24 @ 1
[    2.454115] 000: initcall usb_roles_init+0x1/0x24 returned 0 after 0 usecs
[    2.461021] 000: calling  serio_init+0x1/0x20 @ 1
[    2.466018] 000: initcall serio_init+0x1/0x20 returned 0 after 0 usecs
[    2.472567] 000: calling  input_init+0x1/0xac @ 1
[    2.477490] 000: initcall input_init+0x1/0xac returned 0 after 0 usecs
[    2.484040] 000: calling  rtc_init+0x1/0x3c @ 1
[    2.488757] 000: initcall rtc_init+0x1/0x3c returned 0 after 0 usecs
[    2.495132] 000: calling  media_devnode_init+0x1/0x64 @ 1
[    2.500644] 000: mc: Linux media interface: v0.10
[    2.505496] 000: initcall media_devnode_init+0x1/0x64 returned 0 after 0 usecs
[    2.512876] 000: calling  videodev_init+0x1/0x68 @ 1
[    2.517849] 000: videodev: Linux video capture interface: v2.00
[    2.523920] 000: initcall videodev_init+0x1/0x68 returned 0 after 9765 usecs
[    2.531001] 000: calling  rc_core_init+0x1/0x40 @ 1
[    2.536070] 000: initcall rc_core_init+0x1/0x40 returned 0 after 0 usecs
[    2.542798] 000: calling  power_supply_class_init+0x1/0x30 @ 1
[    2.548876] 000: initcall power_supply_class_init+0x1/0x30 returned 0 after 0 usecs
[    2.556542] 000: calling  hwmon_init+0x1/0x24 @ 1
[    2.561416] 000: initcall hwmon_init+0x1/0x24 returned 0 after 0 usecs
[    2.567956] 000: calling  mmc_init+0x1/0x24 @ 1
[    2.572867] 000: initcall mmc_init+0x1/0x24 returned 0 after 0 usecs
[    2.579233] 000: calling  leds_init+0x1/0x34 @ 1
[    2.584058] 000: initcall leds_init+0x1/0x34 returned 0 after 0 usecs
[    2.590511] 000: calling  ion_device_create+0x1/0xc8 @ 1
[    2.596461] 000: initcall ion_device_create+0x1/0xc8 returned 0 after 0 usecs
[    2.603629] 000: calling  ion_system_heap_init+0x1/0x58 @ 1
[    2.609684] 000: initcall ion_system_heap_init+0x1/0x58 returned 0 after 0 usecs
[    2.617104] 000: calling  ion_cma_heap_init+0x1/0x64 @ 1
[    2.622645] 000: initcall ion_cma_heap_init+0x1/0x64 returned 0 after 0 usecs
[    2.629792] 000: calling  remoteproc_init+0x1/0x10 @ 1
[    2.635156] 000: initcall remoteproc_init+0x1/0x10 returned 0 after 0 usecs
[    2.642149] 000: calling  rpmsg_init+0x1/0x28 @ 1
[    2.647079] 000: initcall rpmsg_init+0x1/0x28 returned 0 after 0 usecs
[    2.653645] 000: calling  iio_init+0x1/0x5c @ 1
[    2.658455] 000: initcall iio_init+0x1/0x5c returned 0 after 0 usecs
[    2.664842] 000: calling  nvmem_init+0x1/0xc @ 1
[    2.669691] 000: initcall nvmem_init+0x1/0xc returned 0 after 0 usecs
[    2.676151] 000: calling  init_soundcore+0x1/0x2c @ 1
[    2.681390] 000: initcall init_soundcore+0x1/0x2c returned 0 after 0 usecs
[    2.688311] 000: calling  alsa_sound_init+0x1/0x74 @ 1
[    2.693638] 000: Advanced Linux Sound Architecture Driver Initialized.
[    2.700172] 000: initcall alsa_sound_init+0x1/0x74 returned 0 after 0 usecs
[    2.707265] 000: calling  proto_init+0x1/0xc @ 1
[    2.711931] 000: initcall proto_init+0x1/0xc returned 0 after 0 usecs
[    2.718474] 000: calling  net_dev_init+0x1/0x1b4 @ 1
[    2.724858] 000: initcall net_dev_init+0x1/0x1b4 returned 0 after 0 usecs
[    2.731818] 000: calling  neigh_init+0x1/0x68 @ 1
[    2.736556] 000: initcall neigh_init+0x1/0x68 returned 0 after 0 usecs
[    2.743177] 000: calling  fib_notifier_init+0x1/0xc @ 1
[    2.748432] 000: initcall fib_notifier_init+0x1/0xc returned 0 after 0 usecs
[    2.755593] 000: calling  init_flow_indr_rhashtable+0x1/0x10 @ 1
[    2.761631] 000: initcall init_flow_indr_rhashtable+0x1/0x10 returned 0 after 0 usecs
[    2.769554] 000: calling  fib_rules_init+0x1/0x80 @ 1
[    2.774627] 000: initcall fib_rules_init+0x1/0x80 returned 0 after 0 usecs
[    2.781613] 000: calling  genl_init+0x1/0x2c @ 1
[    2.786305] 000: initcall genl_init+0x1/0x2c returned 0 after 0 usecs
[    2.792840] 000: calling  nexthop_init+0x1/0x94 @ 1
[    2.797756] 000: initcall nexthop_init+0x1/0x94 returned 0 after 0 usecs
[    2.804556] 000: calling  bt_init+0x1/0x80 @ 1
[    2.809017] 000: Bluetooth: Core ver 2.22
[    2.813188] 000: NET: Registered protocol family 31
[    2.818156] 000: Bluetooth: HCI device and connection manager initialized
[    2.824971] 000: Bluetooth: HCI socket layer initialized
[    2.830403] 000: Bluetooth: L2CAP socket layer initialized
[    2.835945] 000: Bluetooth: SCO socket layer initialized
[    2.841396] 000: initcall bt_init+0x1/0x80 returned 0 after 29296 usecs
[    2.848044] 000: calling  rfkill_init+0x1/0xb4 @ 1
[    2.853446] 000: initcall rfkill_init+0x1/0xb4 returned 0 after 0 usecs
[    2.860108] 000: calling  pwm_module_init+0x1/0x1c @ 1
[    2.865369] 000: pwm module init!
[    2.870603] 000: probe of 2000c00.pwm returned 1 after 0 usecs
[    2.877053] 000: initcall pwm_module_init+0x1/0x1c returned 0 after 9765 usecs
[    2.884309] 000: calling  g2d_module_init+0x1/0xcc @ 1
[    2.890591] 000: g2d 5410000.g2d: Adding to iommu group 0
[    2.896788] 000: probe of 5410000.g2d returned 1 after 0 usecs
[    2.903022] 000: G2D: rcq version initialized.major:249
[    2.908251] 000: initcall g2d_module_init+0x1/0xcc returned 0 after 9765 usecs
[    2.915597] 000: calling  sunxi_keyboard_init+0x1/0xc @ 1
[    2.921719] 000: initcall sunxi_keyboard_init+0x1/0xc returned 0 after 0 usecs
[    2.929069] 000: calling  sunxi_i2c_adap_init+0x1/0xc @ 1
[    2.934796] 000: probe of 2502800.twi returned -517 after 0 usecs
[    2.941464] 000: initcall sunxi_i2c_adap_init+0x1/0xc returned 0 after 9765 usecs
[    2.948994] 000: calling  vin_io_init+0x1/0x28 @ 1
[    2.954344] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
[    2.963971] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    2.973143] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    2.982304] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    2.991507] 000: probe of 5809470.sensor returned 1 after 20000 usecs
[    2.998197] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL!
[    3.007705] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_iovdd supply, setting it to NULL!
[    3.016967] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL!
[    3.026023] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL!
[    3.035268] 000: probe of 5809480.sensor returned 1 after 20000 usecs
[    3.041975] 000: initcall vin_io_init+0x1/0x28 returned 0 after 48828 usecs
[    3.049097] 000: calling  watchdog_init+0x1/0x54 @ 1
[    3.054367] 000: initcall watchdog_init+0x1/0x54 returned 0 after 0 usecs
[    3.062733] 000: calling  proc_cpu_init+0x1/0x1c @ 1
[    3.067750] 000: initcall proc_cpu_init+0x1/0x1c returned 0 after 0 usecs
[    3.074668] 000: calling  alignment_init+0x1/0x90 @ 1
[    3.079767] 000: initcall alignment_init+0x1/0x90 returned 0 after 0 usecs
[    3.086739] 000: calling  clocksource_done_booting+0x1/0x2c @ 1
[    3.092748] 000: clocksource: Switched to clocksource arch_sys_counter
[    3.099422] 000: initcall clocksource_done_booting+0x1/0x2c returned 0 after 6539 usecs
[    3.107539] 000: calling  bpf_init+0x1/0x30 @ 1
[    3.112121] 000: initcall bpf_init+0x1/0x30 returned 0 after 28 usecs
[    3.118688] 000: calling  init_pipe_fs+0x1/0x30 @ 1
[    3.123851] 000: initcall init_pipe_fs+0x1/0x30 returned 0 after 184 usecs
[    3.130745] 000: calling  cgroup_writeback_init+0x1/0x24 @ 1
[    3.136603] 000: initcall cgroup_writeback_init+0x1/0x24 returned 0 after 58 usecs
[    3.144298] 000: calling  eventpoll_init+0x1/0xae @ 1
[    3.149478] 000: initcall eventpoll_init+0x1/0xae returned 0 after 90 usecs
[    3.156575] 000: calling  anon_inode_init+0x1/0x48 @ 1
[    3.161884] 000: initcall anon_inode_init+0x1/0x48 returned 0 after 148 usecs
[    3.169146] 001: calling  proc_locks_init+0x1/0x24 @ 1
[    3.174402] 001: initcall proc_locks_init+0x1/0x24 returned 0 after 20 usecs
[    3.181458] 001: calling  proc_cmdline_init+0x1/0x20 @ 1
[    3.186871] 001: initcall proc_cmdline_init+0x1/0x20 returned 0 after 15 usecs
[    3.194194] 001: calling  proc_consoles_init+0x1/0x24 @ 1
[    3.199633] 001: initcall proc_consoles_init+0x1/0x24 returned 0 after 15 usecs
[    3.207007] 001: calling  proc_cpuinfo_init+0x1/0x1c @ 1
[    3.212348] 001: initcall proc_cpuinfo_init+0x1/0x1c returned 0 after 14 usecs
[    3.219663] 001: calling  proc_devices_init+0x1/0x24 @ 1
[    3.225066] 001: initcall proc_devices_init+0x1/0x24 returned 0 after 14 usecs
[    3.232312] 001: calling  proc_interrupts_init+0x1/0x24 @ 1
[    3.238004] 001: initcall proc_interrupts_init+0x1/0x24 returned 0 after 15 usecs
[    3.245571] 001: calling  proc_loadavg_init+0x1/0x20 @ 1
[    3.250914] 001: initcall proc_loadavg_init+0x1/0x20 returned 0 after 14 usecs
[    3.258200] 001: calling  proc_meminfo_init+0x1/0x20 @ 1
[    3.263611] 001: initcall proc_meminfo_init+0x1/0x20 returned 0 after 15 usecs
[    3.270857] 001: calling  proc_stat_init+0x1/0x1c @ 1
[    3.276006] 001: initcall proc_stat_init+0x1/0x1c returned 0 after 14 usecs
[    3.283034] 001: calling  proc_uptime_init+0x1/0x20 @ 1
[    3.288307] 001: initcall proc_uptime_init+0x1/0x20 returned 0 after 14 usecs
[    3.295523] 001: calling  proc_version_init+0x1/0x20 @ 1
[    3.300857] 001: initcall proc_version_init+0x1/0x20 returned 0 after 14 usecs
[    3.308151] 001: calling  proc_softirqs_init+0x1/0x20 @ 1
[    3.313641] 001: initcall proc_softirqs_init+0x1/0x20 returned 0 after 14 usecs
[    3.320965] 001: calling  proc_kmsg_init+0x1/0x1c @ 1
[    3.326116] 001: initcall proc_kmsg_init+0x1/0x1c returned 0 after 14 usecs
[    3.333182] 001: calling  proc_page_init+0x1/0x48 @ 1
[    3.338296] 001: initcall proc_page_init+0x1/0x48 returned 0 after 37 usecs
[    3.345333] 001: calling  init_ramfs_fs+0x1/0xc @ 1
[    3.350248] 001: initcall init_ramfs_fs+0x1/0xc returned 0 after 10 usecs
[    3.357118] 001: calling  blk_scsi_ioctl_init+0x1/0x268 @ 1
[    3.362719] 001: initcall blk_scsi_ioctl_init+0x1/0x268 returned 0 after 5 usecs
[    3.370176] 001: calling  sun8iw20_pio_init+0x1/0xc @ 1
[    3.398695] 001: sun8iw20-pinctrl pio: initialized sunXi PIO driver
[    3.405288] 001: probe of pio returned 1 after 29592 usecs
[    3.411279] 001: initcall sun8iw20_pio_init+0x1/0xc returned 0 after 34964 usecs
[    3.418830] 001: calling  chr_dev_init+0x1/0xe8 @ 1
[    3.453554] 000: initcall chr_dev_init+0x1/0xe8 returned 0 after 29050 usecs
[    3.460658] 000: calling  firmware_class_init+0x1/0xc0 @ 1
[    3.466291] 000: initcall firmware_class_init+0x1/0xc0 returned 0 after 9 usecs
[    3.474007] 000: calling  udc_init+0x1/0x28 @ 1
[    3.480724] 000: probe of 4100000.udc-controller returned 1 after 1752 usecs
[    3.488128] 000: initcall udc_init+0x1/0x28 returned 0 after 9340 usecs
[    3.495046] 000: calling  thermal_init+0x1/0x110 @ 1
[    3.500035] 000: thermal_sys: Registered thermal governor 'step_wise'
[    3.506575] 000: thermal_sys: Registered thermal governor 'user_space'
[    3.513991] 000: initcall thermal_init+0x1/0x110 returned 0 after 13631 usecs
[    3.521188] 000: calling  sysctl_core_init+0x1/0x28 @ 1
[    3.526681] 000: initcall sysctl_core_init+0x1/0x28 returned 0 after 105 usecs
[    3.534144] 000: calling  eth_offload_init+0x1/0x10 @ 1
[    3.539399] 000: initcall eth_offload_init+0x1/0x10 returned 0 after 3 usecs
[    3.546549] 000: calling  inet_init+0x1/0x1c8 @ 1
[    3.551459] 000: NET: Registered protocol family 2
[    3.558081] 001: tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 4096 bytes, linear)
[    3.567244] 001: TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    3.575524] 001: TCP bind hash table entries: 1024 (order: 2, 28672 bytes, linear)
[    3.583349] 001: TCP: Hash tables configured (established 1024 bind 1024)
[    3.590365] 001: UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    3.597610] 000: UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    3.605664] 000: initcall inet_init+0x1/0x1c8 returned 0 after 53110 usecs
[    3.612597] 000: calling  ipv4_offload_init+0x1/0x58 @ 1
[    3.618035] 000: initcall ipv4_offload_init+0x1/0x58 returned 0 after 5 usecs
[    3.625269] 000: calling  af_unix_init+0x1/0x3c @ 1
[    3.630240] 000: NET: Registered protocol family 1
[    3.635181] 000: initcall af_unix_init+0x1/0x3c returned 0 after 4891 usecs
[    3.642182] 000: calling  ipv6_offload_init+0x1/0x60 @ 1
[    3.647649] 000: initcall ipv6_offload_init+0x1/0x60 returned 0 after 5 usecs
[    3.654874] 000: calling  init_sunrpc+0x1/0x48 @ 1
[    3.660865] 000: RPC: Registered named UNIX socket transport module.
[    3.667348] 000: RPC: Registered udp transport module.
[    3.672514] 000: RPC: Registered tcp transport module.
[    3.677728] 000: RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.684664] 000: initcall init_sunrpc+0x1/0x48 returned 0 after 24389 usecs
[    3.691650] 000: calling  vlan_offload_init+0x1/0x1c @ 1
[    3.697033] 000: initcall vlan_offload_init+0x1/0x1c returned 0 after 5 usecs
[    3.704262] 000: calling  cfg80211_init+0x1/0x84 @ 1
[    3.710336] 000: initcall cfg80211_init+0x1/0x84 returned 0 after 1068 usecs
[    3.717570] 000: calling  dsp_debug_init+0x1/0xc @ 1
[    3.723255] 000: initcall dsp_debug_init+0x1/0xc returned 0 after 683 usecs
[    3.730245] 000: calling  sunxi_spi_init+0x1/0xc @ 1
[    3.736208] 000: sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[    3.745828] 001: spi spi0: spi0 supply spi not found, using dummy regulator
[    3.753421] 001: sunxi_spi_resource_get()2198 - [spi0] SPI MASTER MODE
[    3.760047] 001: sunxi_spi_resource_get()2236 - Failed to get sample mode
[    3.766990] 001: sunxi_spi_resource_get()2241 - Failed to get sample delay
[    3.773964] 001: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
[    3.782992] 001: sunxi_spi_clk_init()2287 - [spi0] mclk 100000000
[    3.790810] 001: sunxi_spi_probe()2700 - [spi0]: driver probe succeed, base c881f000, irq 39
[    3.799545] 001: probe of spi0 returned 1 after 63934 usecs
[    3.805781] 001: initcall sunxi_spi_init+0x1/0xc returned 0 after 68794 usecs
[    3.813090] 001: calling  default_rootfs+0x1/0x5c @ 1
[    3.818307] 001: initcall default_rootfs+0x1/0x5c returned 0 after 142 usecs
[    3.826962] 001: calling  proc_execdomains_init+0x1/0x20 @ 1
[    3.832668] 001: initcall proc_execdomains_init+0x1/0x20 returned 0 after 25 usecs
[    3.840356] 001: calling  register_warn_debugfs+0x1/0x24 @ 1
[    3.846189] 001: initcall register_warn_debugfs+0x1/0x24 returned 0 after 41 usecs
[    3.853865] 001: calling  cpuhp_sysfs_init+0x1/0x6c @ 1
[    3.859267] 001: initcall cpuhp_sysfs_init+0x1/0x6c returned 0 after 148 usecs
[    3.866598] 001: calling  ioresources_init+0x1/0x44 @ 1
[    3.871872] 001: initcall ioresources_init+0x1/0x44 returned 0 after 31 usecs
[    3.879136] 001: calling  irq_gc_init_ops+0x1/0x10 @ 1
[    3.884393] 001: initcall irq_gc_init_ops+0x1/0x10 returned 0 after 2 usecs
[    3.891389] 001: calling  irq_pm_init_ops+0x1/0x10 @ 1
[    3.896661] 001: initcall irq_pm_init_ops+0x1/0x10 returned 0 after 1 usecs
[    3.903735] 001: calling  timekeeping_init_ops+0x1/0x10 @ 1
[    3.909334] 001: initcall timekeeping_init_ops+0x1/0x10 returned 0 after 1 usecs
[    3.916831] 001: calling  init_clocksource_sysfs+0x1/0x20 @ 1
[    3.923262] 001: initcall init_clocksource_sysfs+0x1/0x20 returned 0 after 644 usecs
[    3.931046] 001: calling  init_timer_list_procfs+0x1/0x30 @ 1
[    3.936927] 001: initcall init_timer_list_procfs+0x1/0x30 returned 0 after 20 usecs
[    3.944710] 001: calling  alarmtimer_init+0x1/0xa0 @ 1
[    3.950216] 001: initcall alarmtimer_init+0x1/0xa0 returned 0 after 332 usecs
[    3.957479] 001: calling  init_posix_timers+0x1/0x28 @ 1
[    3.962977] 001: initcall init_posix_timers+0x1/0x28 returned 0 after 74 usecs
[    3.970212] 001: calling  clockevents_init_sysfs+0x1/0x94 @ 1
[    3.977039] 001: initcall clockevents_init_sysfs+0x1/0x94 returned 0 after 941 usecs
[    3.984919] 001: calling  sched_clock_syscore_init+0x1/0x10 @ 1
[    3.990861] 001: initcall sched_clock_syscore_init+0x1/0x10 returned 0 after 1 usecs
[    3.998741] 001: calling  proc_modules_init+0x1/0x1c @ 1
[    4.004195] 001: initcall proc_modules_init+0x1/0x1c returned 0 after 24 usecs
[    4.011453] 001: calling  modules_wq_init+0x1/0x24 @ 1
[    4.016686] 001: initcall modules_wq_init+0x1/0x24 returned 0 after 0 usecs
[    4.023750] 001: calling  kallsyms_init+0x1/0x1c @ 1
[    4.028750] 001: initcall kallsyms_init+0x1/0x1c returned 0 after 17 usecs
[    4.035737] 001: calling  pid_namespaces_init+0x1/0x28 @ 1
[    4.041313] 001: initcall pid_namespaces_init+0x1/0x28 returned 0 after 66 usecs
[    4.048806] 001: calling  ikconfig_init+0x1/0x38 @ 1
[    4.053885] 001: initcall ikconfig_init+0x1/0x38 returned 0 after 18 usecs
[    4.060783] 001: calling  utsname_sysctl_init+0x1/0x10 @ 1
[    4.066397] 001: initcall utsname_sysctl_init+0x1/0x10 returned 0 after 39 usecs
[    4.073896] 001: calling  system_trusted_keyring_init+0x1/0x5c @ 1
[    4.080081] 001: Initialise system trusted keyrings
[    4.085111] 001: initcall system_trusted_keyring_init+0x1/0x5c returned 0 after 4912 usecs
[    4.093604] 001: calling  kswapd_init+0x1/0x44 @ 1
[    4.098648] 001: initcall kswapd_init+0x1/0x44 returned 0 after 223 usecs
[    4.105520] 001: calling  mm_compute_batch_init+0x1/0x40 @ 1
[    4.111212] 001: initcall mm_compute_batch_init+0x1/0x40 returned 0 after 0 usecs
[    4.118775] 001: calling  slab_proc_init+0x1/0x1c @ 1
[    4.123920] 001: initcall slab_proc_init+0x1/0x1c returned 0 after 20 usecs
[    4.130887] 001: calling  workingset_init+0x1/0x64 @ 1
[    4.136089] 001: workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    4.143031] 001: initcall workingset_init+0x1/0x64 returned 0 after 6780 usecs
[    4.150270] 001: calling  proc_vmalloc_init+0x1/0x24 @ 1
[    4.155671] 001: initcall proc_vmalloc_init+0x1/0x24 returned 0 after 16 usecs
[    4.162984] 001: calling  memblock_init_debugfs+0x1/0x50 @ 1
[    4.168762] 001: initcall memblock_init_debugfs+0x1/0x50 returned 0 after 92 usecs
[    4.176418] 001: calling  procswaps_init+0x1/0x1c @ 1
[    4.181493] 001: initcall procswaps_init+0x1/0x1c returned 0 after 15 usecs
[    4.188536] 001: calling  slab_sysfs_init+0x1/0xb0 @ 1
[    4.219083] 001: initcall slab_sysfs_init+0x1/0xb0 returned 0 after 24732 usecs
[    4.226586] 001: calling  fcntl_init+0x1/0x28 @ 1
[    4.231388] 001: initcall fcntl_init+0x1/0x28 returned 0 after 70 usecs
[    4.238191] 001: calling  proc_filesystems_init+0x1/0x20 @ 1
[    4.243996] 001: initcall proc_filesystems_init+0x1/0x20 returned 0 after 26 usecs
[    4.251583] 001: calling  start_dirtytime_writeback+0x1/0x24 @ 1
[    4.257757] 001: initcall start_dirtytime_writeback+0x1/0x24 returned 0 after 6 usecs
[    4.265704] 001: calling  blkdev_init+0x1/0x10 @ 1
[    4.270594] 001: initcall blkdev_init+0x1/0x10 returned 0 after 78 usecs
[    4.277471] 001: calling  dio_init+0x1/0x28 @ 1
[    4.282424] 001: initcall dio_init+0x1/0x28 returned 0 after 394 usecs
[    4.289080] 001: calling  aio_setup+0x1/0x5c @ 1
[    4.294387] 001: initcall aio_setup+0x1/0x5c returned 0 after 545 usecs
[    4.301042] 001: calling  io_uring_init+0x1/0x28 @ 1
[    4.306178] 001: initcall io_uring_init+0x1/0x28 returned 0 after 37 usecs
[    4.313239] 001: calling  mbcache_init+0x1/0x30 @ 1
[    4.318518] 001: initcall mbcache_init+0x1/0x30 returned 0 after 382 usecs
[    4.325515] 001: calling  init_grace+0x1/0xc @ 1
[    4.330160] 001: initcall init_grace+0x1/0xc returned 0 after 15 usecs
[    4.336810] 001: calling  init_devpts_fs+0x1/0x20 @ 1
[    4.341925] 001: initcall init_devpts_fs+0x1/0x20 returned 0 after 51 usecs
[    4.349009] 001: calling  ext4_init_fs+0x1/0x124 @ 1
[    4.356225] 001: initcall ext4_init_fs+0x1/0x124 returned 0 after 2094 usecs
[    4.363420] 001: calling  init_ext2_fs+0x1/0x58 @ 1
[    4.368655] 001: initcall init_ext2_fs+0x1/0x58 returned 0 after 336 usecs
[    4.375674] 001: calling  journal_init+0x1/0xbc @ 1
[    4.381827] 001: initcall journal_init+0x1/0xbc returned 0 after 1234 usecs
[    4.388923] 001: calling  init_fat_fs+0x1/0x44 @ 1
[    4.394504] 001: initcall init_fat_fs+0x1/0x44 returned 0 after 665 usecs
[    4.401316] 001: calling  init_vfat_fs+0x1/0xc @ 1
[    4.406246] 001: initcall init_vfat_fs+0x1/0xc returned 0 after 14 usecs
[    4.413049] 001: calling  init_msdos_fs+0x1/0xc @ 1
[    4.417945] 001: initcall init_msdos_fs+0x1/0xc returned 0 after 9 usecs
[    4.424767] 001: calling  init_nfs_fs+0x1/0xe0 @ 1
[    4.431127] 001: initcall init_nfs_fs+0x1/0xe0 returned 0 after 1514 usecs
[    4.438159] 001: calling  init_nfs_v2+0x1/0x10 @ 1
[    4.443113] 001: initcall init_nfs_v2+0x1/0x10 returned 0 after 3 usecs
[    4.449766] 001: calling  init_nfs_v3+0x1/0x10 @ 1
[    4.454655] 001: initcall init_nfs_v3+0x1/0x10 returned 0 after 2 usecs
[    4.461279] 001: calling  init_nfs_v4+0x1/0x24 @ 1
[    4.466203] 001: NFS: Registering the id_resolver key type
[    4.471735] 001: Key type id_resolver registered
[    4.476455] 001: Key type id_legacy registered
[    4.480937] 001: initcall init_nfs_v4+0x1/0x24 returned 0 after 14388 usecs
[    4.488025] 001: calling  nfs4filelayout_init+0x1/0x20 @ 1
[    4.493625] 001: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    4.500761] 001: initcall nfs4filelayout_init+0x1/0x20 returned 0 after 6968 usecs
[    4.508457] 001: calling  nfs4flexfilelayout_init+0x1/0x20 @ 1
[    4.514385] 001: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    4.522229] 001: initcall nfs4flexfilelayout_init+0x1/0x20 returned 0 after 7660 usecs
[    4.530362] 001: calling  init_nfsd+0x1/0x98 @ 1
[    4.535116] 001: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    4.542200] 001: initcall init_nfsd+0x1/0x98 returned 0 after 6918 usecs
[    4.549145] 001: calling  init_nlm+0x1/0x48 @ 1
[    4.553847] 001: initcall init_nlm+0x1/0x48 returned 0 after 71 usecs
[    4.560306] 001: calling  init_nls_cp437+0x1/0xc @ 1
[    4.565366] 001: initcall init_nls_cp437+0x1/0xc returned 0 after 2 usecs
[    4.572170] 001: calling  init_nls_iso8859_1+0x1/0xc @ 1
[    4.577550] 001: initcall init_nls_iso8859_1+0x1/0xc returned 0 after 2 usecs
[    4.584771] 001: calling  fuse_init+0x1/0xdc @ 1
[    4.589406] 001: fuse: init (API version 7.31)
[    4.594806] 001: initcall fuse_init+0x1/0xdc returned 0 after 5273 usecs
[    4.601558] 001: calling  ovl_init+0x1/0x4c @ 1
[    4.606617] 001: initcall ovl_init+0x1/0x4c returned 0 after 367 usecs
[    4.613247] 001: calling  ipc_init+0x1/0x20 @ 1
[    4.617914] 001: initcall ipc_init+0x1/0x20 returned 0 after 105 usecs
[    4.624559] 001: calling  ipc_sysctl_init+0x1/0x10 @ 1
[    4.629765] 001: initcall ipc_sysctl_init+0x1/0x10 returned 0 after 49 usecs
[    4.636926] 001: calling  init_mqueue_fs+0x1/0x8c @ 1
[    4.642543] 001: initcall init_mqueue_fs+0x1/0x8c returned 0 after 533 usecs
[    4.649715] 001: calling  key_proc_init+0x1/0x50 @ 1
[    4.654822] 001: initcall key_proc_init+0x1/0x50 returned 0 after 35 usecs
[    4.661715] 001: calling  crypto_algapi_init+0x1/0xc @ 1
[    4.667132] 001: initcall crypto_algapi_init+0x1/0xc returned 0 after 15 usecs
[    4.674482] 001: calling  jent_mod_init+0x1/0x28 @ 1
[    4.745305] 000: initcall jent_mod_init+0x1/0x28 returned 0 after 64296 usecs
[    4.752498] 000: calling  af_alg_init+0x1/0x2c @ 1
[    4.757413] 000: NET: Registered protocol family 38
[    4.762301] 000: initcall af_alg_init+0x1/0x2c returned 0 after 4778 usecs
[    4.769297] 000: calling  algif_hash_init+0x1/0xc @ 1
[    4.774474] 000: initcall algif_hash_init+0x1/0xc returned 0 after 4 usecs
[    4.781358] 000: calling  algif_skcipher_init+0x1/0xc @ 1
[    4.786843] 000: initcall algif_skcipher_init+0x1/0xc returned 0 after 4 usecs
[    4.794165] 000: calling  rng_init+0x1/0xc @ 1
[    4.798645] 000: initcall rng_init+0x1/0xc returned 0 after 4 usecs
[    4.804994] 000: calling  algif_aead_init+0x1/0xc @ 1
[    4.810063] 000: initcall algif_aead_init+0x1/0xc returned 0 after 4 usecs
[    4.817043] 000: calling  asymmetric_key_init+0x1/0xc @ 1
[    4.822451] 000: Key type asymmetric registered
[    4.827076] 000: initcall asymmetric_key_init+0x1/0xc returned 0 after 4520 usecs
[    4.834700] 000: calling  x509_key_init+0x1/0xc @ 1
[    4.839583] 000: Asymmetric key parser 'x509' registered
[    4.844998] 000: initcall x509_key_init+0x1/0xc returned 0 after 5290 usecs
[    4.851974] 000: calling  proc_genhd_init+0x1/0x3c @ 1
[    4.857223] 000: initcall proc_genhd_init+0x1/0x3c returned 0 after 33 usecs
[    4.864338] 000: calling  init_emergency_pool+0x1/0x50 @ 1
[    4.869847] 000: initcall init_emergency_pool+0x1/0x50 returned 0 after 1 usecs
[    4.877226] 000: calling  bsg_init+0x1/0xb8 @ 1
[    4.881851] 000: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    4.889785] 000: initcall bsg_init+0x1/0xb8 returned 0 after 7835 usecs
[    4.896524] 000: calling  deadline_init+0x1/0xc @ 1
[    4.901410] 000: io scheduler mq-deadline registered
[    4.906470] 000: initcall deadline_init+0x1/0xc returned 0 after 4944 usecs
[    4.913551] 000: calling  kyber_init+0x1/0xc @ 1
[    4.918176] 000: io scheduler kyber registered
[    4.922616] 000: initcall kyber_init+0x1/0xc returned 0 after 4339 usecs
[    4.929454] 000: calling  libcrc32c_mod_init+0x1/0x24 @ 1
[    4.934963] 000: initcall libcrc32c_mod_init+0x1/0x24 returned 0 after 13 usecs
[    4.942277] 000: calling  percpu_counter_startup+0x1/0x68 @ 1
[    4.948233] 000: initcall percpu_counter_startup+0x1/0x68 returned 0 after 100 usecs
[    4.956094] 000: calling  test_atomics_init+0x1/0x16a8 @ 1
[    4.961637] 000: atomic64_test: passed
[    4.965480] 000: initcall test_atomics_init+0x1/0x16a8 returned 0 after 3795 usecs
[    4.973157] 000: calling  sg_pool_init+0x1/0x98 @ 1
[    4.979410] 000: initcall sg_pool_init+0x1/0x98 returned 0 after 1322 usecs
[    4.986498] 000: calling  mbus_pmu_init+0x1/0x28 @ 1
[    4.992484] 000: probe of 3102000.mbus-controller returned 1 after 787 usecs
[    5.000140] 000: initcall mbus_pmu_init+0x1/0x28 returned 0 after 8454 usecs
[    5.007335] 000: calling  sunxi_pinctrl_debugfs_init+0x1/0xc4 @ 1
[    5.013727] 000: initcall sunxi_pinctrl_debugfs_init+0x1/0xc4 returned 0 after 179 usecs
[    5.021834] 000: calling  sunxi_pwm_init+0x1/0xfc @ 1
[    5.027501] 000: initcall sunxi_pwm_init+0x1/0xfc returned 0 after 504 usecs
[    5.034674] 000: calling  disp_module_init+0x1/0xd4 @ 1
[    5.039908] 000: [DISP]disp_module_init
[    5.044944] 000: disp 5000000.disp: Adding to iommu group 0
[    5.051714] 000: [DISP] parser_disp_init_para,line:1430:
[    5.057143] 000: of_property_read fb0_width fail
[    5.061790] 000: [DISP] disp_init,line:2387:
[    5.066176] 000: smooth display screen:0 type:1 mode:4
[    5.105165] 000: display_fb_request,fb_id:0
[    5.114809] 000: disp_al_manager_apply ouput_type:1
[    5.120160] 000: sunxi_pwm_enable_dual: can't parse pwm device
[    5.123420] 001: probe of 5000000.disp returned 1 after 78636 usecs
[    5.132962] 001: [DISP]disp_module_init finish
[    5.137431] 001: initcall disp_module_init+0x1/0xd4 returned 0 after 95237 usecs
[    5.143125] 000: free logo buffer src_phy_addr=0x43f12000  fb_height=480  src_stride=3200
[    5.144982] 001: calling  of_fixed_factor_clk_driver_init+0x1/0xc @ 1
[    5.156580] 000: Freeing logo buffer memory: 1500K
[    5.160105] 001: initcall of_fixed_factor_clk_driver_init+0x1/0xc returned 0 after 560 usecs
[    5.172952] 001: calling  of_fixed_clk_driver_init+0x1/0xc @ 1
[    5.179317] 001: initcall of_fixed_clk_driver_init+0x1/0xc returned 0 after 496 usecs
[    5.187301] 001: calling  gpio_clk_driver_init+0x1/0xc @ 1
[    5.193440] 001: initcall gpio_clk_driver_init+0x1/0xc returned 0 after 518 usecs
[    5.200942] 001: calling  sunxi_sram_driver_init+0x1/0xc @ 1
[    5.207897] 001: initcall sunxi_sram_driver_init+0x1/0xc returned 0 after 1160 usecs
[    5.215764] 001: calling  sunxi_sid_init+0x1/0x1c @ 1
[    5.220835] 001: sunxi_sid_init()563 - insmod ok
[    5.225557] 001: initcall sunxi_sid_init+0x1/0x1c returned 0 after 4611 usecs
[    5.232721] 001: calling  pwm_regulator_driver_init+0x1/0xc @ 1
[    5.239661] 001: pwm-regulator: supplied by regulator-dummy
[    5.246265] 001: probe of vdd-cpu returned 1 after 7133 usecs
[    5.252125] 001: initcall pwm_regulator_driver_init+0x1/0xc returned 0 after 13068 usecs
[    5.260378] 001: calling  reset_simple_driver_init+0x1/0xc @ 1
[    5.267362] 001: initcall reset_simple_driver_init+0x1/0xc returned 0 after 1021 usecs
[    5.275472] 001: calling  n_null_init+0x1/0x14 @ 1
[    5.280273] 001: initcall n_null_init+0x1/0x14 returned 0 after 2 usecs
[    5.286985] 001: calling  pty_init+0x1/0x1a8 @ 1
[    5.292125] 001: initcall pty_init+0x1/0x1a8 returned 0 after 493 usecs
[    5.298886] 001: calling  sysrq_init+0x1/0x30 @ 1
[    5.303739] 001: initcall sysrq_init+0x1/0x30 returned 0 after 38 usecs
[    5.310379] 001: calling  sunxi_uart_init+0x1/0x38 @ 1
[    5.316303] 001: sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[    5.325214] 001: uart uart0: get regulator failed
[    5.329982] 001: uart uart0: uart0 supply uart not found, using dummy regulator
[    5.338046] 001: uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    5.346450] 001: sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
[    5.354977] 001: printk: console [ttyS0] enabled
[    5.359615] 001: printk: bootconsole [earlycon0] disabled
[    0.655126] 000: initcall cpu_pm_init+0x1/0x10 returned 0 after 0 usecs
** 27 printk messages dropped **
[    0.828752] 000: calling  sun8iw20_rtc_ccu_init+0x1/0x20 @ 1
** 1 printk message dropped **
[    0.842118] 000: calling  sunxi_r_ccu_sun8iw20_init+0x1/0x20 @ 1
[    0.848324] 000: initcall sunxi_r_ccu_sun8iw20_init+0x1/0x20 returned 0 after 0 usecs
[    0.856190] 000: calling  virtio_init+0x1/0x1c @ 1
[    0.861226] 000: initcall virtio_init+0x1/0x1c returned 0 after 0 usecs
[    0.867870] 000: calling  regulator_init+0x1/0x78 @ 1
[    0.874373] 000: probe of reg-dummy returned 1 after 0 usecs
[    0.880147] 000: initcall regulator_init+0x1/0x78 returned 0 after 0 usecs
[    0.887184] 000: calling  iommu_init+0x1/0x28 @ 1
[    0.891981] 000: initcall iommu_init+0x1/0x28 returned 0 after 0 usecs
** 9 printk messages dropped **
[    0.956884] 000: initcall cpufreq_gov_performance_init+0x1/0xc returned 0 after 0 usecs
** 4 printk messages dropped **
[    0.988851] 000: calling  net_defaults_init+0x1/0x1c @ 1
[    0.994194] 000: initcall net_defaults_init+0x1/0x1c returned 0 after 0 usecs
[    1.001512] 000: calling  init_default_flow_dissectors+0x1/0x48 @ 1
[    1.007811] 000: initcall init_default_flow_dissectors+0x1/0x48 returned 0 after 0 usecs
** 38 printk messages dropped **
[    1.264359] 000: calling  rpmsg_char_init+0x1/0x84 @ 1
[    1.269782] 000: initcall rpmsg_char_init+0x1/0x84 returned 0 after 0 usecs
[    1.276771] 000: calling  kobject_uevent_init+0x1/0xc @ 1
[    1.282330] 000: initcall kobject_uevent_init+0x1/0xc returned 0 after 0 usecs
[    1.291033] 000: calling  gate_vma_init+0x1/0x48 @ 1
[    1.296123] 000: initcall gate_vma_init+0x1/0x48 returned 0 after 0 usecs
[    1.302940] 000: calling  customize_machine+0x1/0x14 @ 1
[    1.308346] 000: initcall customize_machine+0x1/0x14 returned 0 after 0 usecs
[    1.315503] 000: calling  exceptions_init+0x1/0x58 @ 1
[    1.320753] 000: initcall exceptions_init+0x1/0x58 returned 0 after 0 usecs
[    1.327731] 000: calling  cryptomgr_init+0x1/0xc @ 1
[    1.332803] 000: initcall cryptomgr_init+0x1/0xc returned 0 after 0 usecs
[    1.339617] 000: calling  dma_bus_init+0x1/0x68 @ 1
[    1.344729] 000: initcall dma_bus_init+0x1/0x68 returned 0 after 0 usecs
[    1.351440] 000: calling  dma_channel_table_init+0x1/0xa0 @ 1
[    1.357347] 000: initcall dma_channel_table_init+0x1/0xa0 returned 0 after 0 usecs
[    1.364931] 000: calling  iommu_dma_init+0x1/0x4 @ 1
[    1.370030] 000: initcall iommu_dma_init+0x1/0x4 returned 0 after 0 usecs
[    1.376835] 000: calling  of_platform_default_populate_init+0x1/0x72 @ 1
[    1.390413] 000: probe of 7090000.rtc_ccu returned -517 after 0 usecs
[    1.397478] 000: probe of 2001000.ccu returned -517 after 0 usecs
[    1.404013] 000: probe of 7010000.r_ccu returned -517 after 0 usecs
[    1.483803] 001: rtc_ccu: sunxi ccu init OK
[    1.488140] 001: probe of 7090000.rtc_ccu returned 1 after 0 usecs
[    1.499463] 001: ccu: sunxi ccu init OK
[    1.503624] 001: probe of 2001000.ccu returned 1 after 10000 usecs
[    1.510878] 001: r_ccu: sunxi ccu init OK
[    1.515041] 001: probe of 7010000.r_ccu returned 1 after 10000 usecs
[    1.523612] 001: initcall of_platform_default_populate_init+0x1/0x72 returned 0 after 126953 usecs
[    1.534356] 001: calling  topology_init+0x1/0x48 @ 1
[    1.540021] 001: initcall topology_init+0x1/0x48 returned 0 after 0 usecs
[    1.546941] 001: calling  uid_cache_init+0x1/0x5c @ 1
[    1.552066] 001: initcall uid_cache_init+0x1/0x5c returned 0 after 0 usecs
[    1.559101] 001: calling  param_sysfs_init+0x1/0x14c @ 1
[    1.618903] 001: initcall param_sysfs_init+0x1/0x14c returned 0 after 48828 usecs
[    1.626926] 001: calling  user_namespace_sysctl_init+0x1/0x2c @ 1
[    1.633122] 001: initcall user_namespace_sysctl_init+0x1/0x2c returned 0 after 0 usecs
[    1.641749] 000: calling  pm_sysrq_init+0x1/0x14 @ 1
[    1.646876] 001: initcall pm_sysrq_init+0x1/0x14 returned 0 after 0 usecs
[    1.654552] 001: calling  create_proc_profile+0x1/0x94 @ 1
[    1.660067] 001: initcall create_proc_profile+0x1/0x94 returned 0 after 0 usecs
[    1.667498] 001: calling  cgroup_sysfs_init+0x1/0x14 @ 1
[    1.672881] 001: initcall cgroup_sysfs_init+0x1/0x14 returned 0 after 0 usecs
[    1.680174] 001: calling  cgroup_namespaces_init+0x1/0x4 @ 1
[    1.685845] 001: initcall cgroup_namespaces_init+0x1/0x4 returned 0 after 0 usecs
[    1.693456] 001: calling  dev_map_init+0x1/0x10 @ 1
[    1.698348] 001: initcall dev_map_init+0x1/0x10 returned 0 after 0 usecs
[    1.705160] 001: calling  oom_init+0x1/0x28 @ 1
[    1.709954] 001: initcall oom_init+0x1/0x28 returned 0 after 0 usecs
[    1.716420] 001: calling  cgwb_init+0x1/0x24 @ 1
[    1.721122] 001: initcall cgwb_init+0x1/0x24 returned 0 after 0 usecs
[    1.727664] 001: calling  default_bdi_init+0x1/0x78 @ 1
[    1.733534] 001: initcall default_bdi_init+0x1/0x78 returned 0 after 0 usecs
[    1.740739] 001: calling  percpu_enable_async+0x1/0x10 @ 1
[    1.746252] 001: initcall percpu_enable_async+0x1/0x10 returned 0 after 0 usecs
[    1.753658] 001: calling  init_reserve_notifier+0x1/0x4 @ 1
[    1.759284] 001: initcall init_reserve_notifier+0x1/0x4 returned 0 after 0 usecs
[    1.766793] 001: calling  init_admin_reserve+0x1/0x28 @ 1
[    1.772203] 001: initcall init_admin_reserve+0x1/0x28 returned 0 after 0 usecs
[    1.779527] 001: calling  init_user_reserve+0x1/0x28 @ 1
[    1.784847] 001: initcall init_user_reserve+0x1/0x28 returned 0 after 0 usecs
[    1.792074] 001: calling  swap_init_sysfs+0x1/0x4c @ 1
[    1.797264] 001: initcall swap_init_sysfs+0x1/0x4c returned 0 after 0 usecs
[    1.804336] 001: calling  swapfile_init+0x1/0x34 @ 1
[    1.809317] 001: initcall swapfile_init+0x1/0x34 returned 0 after 0 usecs
[    1.816209] 001: calling  mem_cgroup_init+0x1/0xc4 @ 1
[    1.821455] 001: initcall mem_cgroup_init+0x1/0xc4 returned 0 after 0 usecs
[    1.828509] 001: calling  rsa_init+0x1/0x28 @ 1
[    1.833321] 000: initcall rsa_init+0x1/0x28 returned 0 after 0 usecs
[    1.839749] 000: calling  crypto_cmac_module_init+0x1/0xc @ 1
[    1.845617] 000: initcall crypto_cmac_module_init+0x1/0xc returned 0 after 0 usecs
[    1.853204] 000: calling  hmac_module_init+0x1/0xc @ 1
[    1.858531] 000: initcall hmac_module_init+0x1/0xc returned 0 after 0 usecs
[    1.865501] 000: calling  crypto_null_mod_init+0x1/0x44 @ 1
[    1.872060] 000: initcall crypto_null_mod_init+0x1/0x44 returned 0 after 0 usecs
[    1.879482] 000: calling  sha256_generic_mod_init+0x1/0xc @ 1
[    1.885805] 000: initcall sha256_generic_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.893414] 000: calling  crypto_ecb_module_init+0x1/0xc @ 1
[    1.899215] 000: initcall crypto_ecb_module_init+0x1/0xc returned 0 after 0 usecs
[    1.906706] 000: calling  des_generic_mod_init+0x1/0xc @ 1
[    1.912727] 000: initcall des_generic_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.920050] 000: calling  aes_init+0x1/0xc @ 1
[    1.924849] 000: initcall aes_init+0x1/0xc returned 0 after 0 usecs
[    1.931138] 000: calling  arc4_init+0x1/0xc @ 1
[    1.936004] 000: initcall arc4_init+0x1/0xc returned 0 after 0 usecs
[    1.942394] 000: calling  deflate_mod_init+0x1/0x28 @ 1
[    1.948396] 000: initcall deflate_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.955477] 000: calling  crc32c_mod_init+0x1/0xc @ 1
[    1.960896] 000: initcall crc32c_mod_init+0x1/0xc returned 0 after 0 usecs
[    1.967791] 000: calling  lzo_mod_init+0x1/0x28 @ 1
[    1.973234] 000: initcall lzo_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.979959] 000: calling  lzorle_mod_init+0x1/0x28 @ 1
[    1.985661] 000: initcall lzorle_mod_init+0x1/0x28 returned 0 after 0 usecs
[    1.992637] 000: calling  drbg_init+0x1/0x58 @ 1
[    1.999283] 000: initcall drbg_init+0x1/0x58 returned 0 after 0 usecs
[    2.005769] 000: calling  zstd_mod_init+0x1/0x28 @ 1
[    2.011331] 000: initcall zstd_mod_init+0x1/0x28 returned 0 after 0 usecs
[    2.018139] 000: calling  ecdh_init+0x1/0xa @ 1
[    2.023033] 000: initcall ecdh_init+0x1/0xa returned 0 after 0 usecs
[    2.029413] 000: calling  init_bio+0x1/0x74 @ 1
[    2.034210] 000: initcall init_bio+0x1/0x74 returned 0 after 0 usecs
[    2.040582] 000: calling  blk_settings_init+0x1/0x24 @ 1
[    2.046024] 000: initcall blk_settings_init+0x1/0x24 returned 0 after 0 usecs
[    2.053191] 000: calling  blk_ioc_init+0x1/0x28 @ 1
[    2.058205] 000: initcall blk_ioc_init+0x1/0x28 returned 0 after 0 usecs
[    2.064931] 000: calling  blk_softirq_init+0x1/0x64 @ 1
[    2.070287] 000: initcall blk_softirq_init+0x1/0x64 returned 0 after 0 usecs
[    2.077358] 000: calling  blk_mq_init+0x1/0x28 @ 1
[    2.082257] 000: initcall blk_mq_init+0x1/0x28 returned 0 after 0 usecs
[    2.088894] 000: calling  genhd_device_init+0x1/0x5c @ 1
[    2.094850] 000: initcall genhd_device_init+0x1/0x5c returned 0 after 0 usecs
[    2.102009] 000: calling  blkcg_init+0x1/0x28 @ 1
[    2.107405] 001: initcall blkcg_init+0x1/0x28 returned 0 after 0 usecs
[    2.114032] 001: calling  gpiolib_debugfs_init+0x1/0x24 @ 1
[    2.119738] 001: initcall gpiolib_debugfs_init+0x1/0x24 returned 0 after 0 usecs
[    2.127281] 001: calling  pwm_debugfs_init+0x1/0x24 @ 1
[    2.132556] 001: initcall pwm_debugfs_init+0x1/0x24 returned 0 after 0 usecs
[    2.139731] 001: calling  pwm_sysfs_init+0x1/0x10 @ 1
[    2.144859] 001: initcall pwm_sysfs_init+0x1/0x10 returned 0 after 0 usecs
[    2.151862] 001: calling  fbmem_init+0x1/0x98 @ 1
[    2.156679] 001: initcall fbmem_init+0x1/0x98 returned 0 after 0 usecs
[    2.163312] 001: calling  sun6i_dma_init+0x1/0xc @ 1
[    2.212820] 000: probe of 3002000.dma-controller returned 1 after 40000 usecs
[    2.221575] 000: initcall sun6i_dma_init+0x1/0xc returned 0 after 48828 usecs
[    2.228750] 000: calling  regulator_fixed_voltage_init+0x1/0xc @ 1
[    2.236156] 000: probe of pio-18 returned 1 after 0 usecs
[    2.242437] 000: probe of pio-33 returned 1 after 0 usecs
[    2.248622] 000: probe of usb1-vbus returned 0 after 0 usecs
[    2.254397] 000: initcall regulator_fixed_voltage_init+0x1/0xc returned 0 after 9765 usecs
[    2.262873] 000: calling  misc_init+0x1/0x88 @ 1
[    2.267619] 000: initcall misc_init+0x1/0x88 returned 0 after 0 usecs
[    2.274197] 000: calling  sunxi_di_init+0x1/0x1c @ 1
[    2.279198] 000: Deinterlace Module initialized.
[    2.284297] 000: probe of 5400000.deinterlace returned -517 after 0 usecs
[    2.291324] 000: initcall sunxi_di_init+0x1/0x1c returned 0 after 9765 usecs
[    2.298528] 000: calling  iommu_subsys_init+0x1/0x4c @ 1
[    2.303849] 000: iommu: Default domain type: Translated
[    2.309244] 000: initcall iommu_subsys_init+0x1/0x4c returned 0 after 9765 usecs
[    2.316659] 000: calling  sunxi_iommu_init+0x1/0xc @ 1
[    2.322256] 000: sunxi iommu: irq = 24
[    2.327238] 000: probe of 2010000.iommu returned 1 after 0 usecs
[    2.333863] 000: initcall sunxi_iommu_init+0x1/0xc returned 0 after 9765 usecs
[    2.341126] 000: calling  register_cpu_capacity_sysctl+0x1/0x50 @ 1
[    2.347564] 000: initcall register_cpu_capacity_sysctl+0x1/0x50 returned 0 after 0 usecs
[    2.355699] 000: calling  dma_buf_init+0x1/0x84 @ 1
[    2.360914] 000: initcall dma_buf_init+0x1/0x84 returned 0 after 0 usecs
[    2.367627] 000: calling  init_scsi+0x1/0x60 @ 1
[    2.373069] 000: SCSI subsystem initialized
[    2.377257] 000: initcall init_scsi+0x1/0x60 returned 0 after 0 usecs
[    2.383841] 000: calling  phy_init+0x1/0x148 @ 1
[    2.388812] 000: initcall phy_init+0x1/0x148 returned 0 after 0 usecs
[    2.395387] 000: calling  usb_common_init+0x1/0x1c @ 1
[    2.400571] 000: initcall usb_common_init+0x1/0x1c returned 0 after 0 usecs
[    2.407629] 000: calling  usb_init+0x1/0xd0 @ 1
[    2.412584] 000: usbcore: registered new interface driver usbfs
[    2.418830] 000: usbcore: registered new interface driver hub
[    2.424795] 000: usbcore: registered new device driver usb
[    2.430393] 000: initcall usb_init+0x1/0xd0 returned 0 after 19531 usecs
[    2.437141] 000: calling  usb_udc_init+0x1/0x3c @ 1
[    2.442186] 000: initcall usb_udc_init+0x1/0x3c returned 0 after 0 usecs
[    2.448906] 000: calling  usb_roles_init+0x1/0x24 @ 1
[    2.454115] 000: initcall usb_roles_init+0x1/0x24 returned 0 after 0 usecs
[    2.461021] 000: calling  serio_init+0x1/0x20 @ 1
[    2.466018] 000: initcall serio_init+0x1/0x20 returned 0 after 0 usecs
[    2.472567] 000: calling  input_init+0x1/0xac @ 1
[    2.477490] 000: in

默

背景：我买了一块T113-S3的开发板，SD卡启动。用配套 img就能启动，我自己尝试打了一个img，但是内核启动到一半卡主了。
环境：
1、board.dts、sun8iw20p1.dtsi.dtsi 均拷贝自配套源码。
2、芯片T113-S3
3、SD卡启动
4、来自 T113-i 的linux，版本 5.4.61

启动日志如下：

[30]HELLO! BOOT0 is starting!
[33]BOOT0 commit : adaf1174cc
[36]set pll start
[42]periph0 has been enabled
[45]set pll end
[46][pmu]: bus read error
[49]board init ok
[51]ZQ value = 0x2f
[53]get_pmu_exist() = -1
[55]ddr_efuse_type: 0xa
[58]trefi:7.8ms
[60][AUTO DEBUG] single rank and full DQ!
[64]ddr_efuse_type: 0xa
[66]trefi:7.8ms
[69][AUTO DEBUG] rank 0 row = 13
[72][AUTO DEBUG] rank 0 bank = 8
[75][AUTO DEBUG] rank 0 page size = 2 KB
[79]DRAM BOOT DRIVE INFO: V0.33
[82]DRAM CLK = 936 MHz
[85]DRAM Type = 3 (2:DDR2,3:DDR3)
[88]DRAMC read ODT  off.
[90]DRAM ODT value: 0x42.
[93]ddr_efuse_type: 0xa
[96]DRAM SIZE =128 M
[98]dram_tpr4:0x0
[100]PLL_DDR_CTRL_REG:0xf8004d00
[103]DRAM_CLK_REG:0xc0000000
[106][TIMING DEBUG] MR2= 0x20
[114]DRAM simple test OK.
[116]rtc standby flag is 0x0, super standby flag is 0x0
[121]dram size =128
[124]card no is 0
[126]sdcard 0 line count 4
[128][mmc]: mmc driver ver 2021-05-21 14:47
[138][mmc]: Wrong media type 0x0
[141][mmc]: ***Try SD card 0***
[159][mmc]: HSSDR52/SDR25 4 bit
[162][mmc]: 50000000 Hz
[164][mmc]: 30436 MB
[166][mmc]: ***SD/MMC 0 init OK!!!***
[259]Loading boot-pkg Succeed(index=0).
[263]Entry_name        = u-boot
[269]Entry_name        = optee
[273]Entry_name        = dtb
[276]mmc not para
[278]Jump to second Boot.
M/TC: OP-TEE version: e9372c9c-dirty (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #2 Sat Mar 19 11:09:45 UTC 2022 arm


U-Boot 2018.05 (Nov 01 2023 - 00:30:09 +0800) Allwinner Technology

[00.331]CPU:   Allwinner Family
[00.334]Model: sun8iw20
[00.336]DRAM:  128 MiB
[00.339]Relocation Offset is: 04ec8000
[00.364]secure enable bit: 0
E/TC:0   tee_read_fdt:433 fine node /firmware/optee failed with FDT_ERR_NOTFOUND
[00.376]smc_tee_inform_fdt failed with: -65536[00.381]CPU=1200 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=300Mhz
[00.387]gic: sec monitor mode
[00.390]flash init start
[00.392]workmode = 0,storage type = 1
[00.395][mmc]: mmc driver ver uboot2018:2021-12-20 13:35:00
[00.400][mmc]: get sdc_type fail and use default host:tm1.
[00.406][mmc]: can't find node "mmc0",will add new node
[00.411][mmc]: fdt err returned <no error>
[00.415][mmc]: Using default timing para
[00.419][mmc]: SUNXI SDMMC Controller Version:0x50310
[00.445][mmc]: card_caps:0x3000000a
[00.448][mmc]: host_caps:0x3000003f
[00.453]sunxi flash init ok
[00.455]line:703 init_clocks
[00.458]drv_disp_init
request pwm success, pwm7:pwm7:0x2000c00.
fdt get node offset faill: hdmi
[00.473]drv_disp_init finish
[00.488]Loading Environment from SUNXI_FLASH... OK
[00.506]boot_gui_init:start
[00.509]set disp.dev2_output_type fail. using defval=0
[00.515]boot_gui_init:finish
partno erro : can't find partition bootloader
54 bytes read in 1 ms (52.7 KiB/s)
[00.530]bmp_name=bootlogo.bmp size 38454
38454 bytes read in 4 ms (9.2 MiB/s)
[00.547]Item0 (Map) magic is bad
[00.550]the secure storage item0 copy0 magic is bad
[00.555]Item0 (Map) magic is bad
[00.558]the secure storage item0 copy1 magic is bad
[00.562]Item0 (Map) magic is bad
[00.565]out of usb burn from boot: not need burn key
List file under ULI/factory
** Unrecognized filesystem type **
root_partition is rootfs
set root to /dev/mmcblk0p5
[00.584]update part info
[00.587]update bootcmd
[00.590]change working_fdt 0x43e77e70 to 0x43e47e70
disable nand error: FDT_ERR_BADPATH
[00.611]update dts
Hit any key to stop autoboot:  1 FDT ERROR:get muxsel err returned FDT_ERR_INTERNAL
sunxi_pwm_pin_set_state, fdt_set_all_pin, ret=-1
[00.705]LCD open finish                                                                                                                                                           0
[02.056]no vendor_boot partition is found
Android's image name: sun8i_arm
[02.068]Starting kernel ...

[02.070][mmc]: MMC Device 2 not found
[02.073][mmc]: mmc 2 not find, so not exit
[    0.000000] 000: printk: bootconsole [earlycon0] enabled
[    0.000000] 000: Memory policy: Data cache writealloc
[    0.000000] 000: cma: Reserved 4 MiB at 0x47c00000
[    0.000000] 000: On node 0 totalpages: 32768
[    0.000000] 000:   Normal zone: 288 pages used for memmap
[    0.000000] 000:   Normal zone: 0 pages reserved
[    0.000000] 000:   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] 000: psci: probing for conduit method from DT.
[    0.000000] 000: psci: PSCIv1.0 detected in firmware.
[    0.000000] 000: psci: Using standard PSCI v0.2 function IDs
[    0.000000] 000: psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] 000: psci: SMC Calling Convention v1.0
[    0.000000] 000: percpu: Embedded 11 pages/cpu s15488 r8192 d21376 u45056
[    0.000000] 000: pcpu-alloc: s15488 r8192 d21376 u45056 alloc=11*4096
[    0.000000] 000:
[    0.000000] 000: pcpu-alloc:
[    0.000000] 000: [0]
[    0.000000] 000: 0
[    0.000000] 000: [0]
[    0.000000] 000: 1
[    0.000000] 000:
[    0.000000] 000: Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] 000: Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:private@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05(11/01/2023-00:30:09) mbr_offset=1032192 disp_reserve=1536000,0x43f12000 androidboot.dramsize=128
[    0.000000] 000: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000000] 000: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] 000: mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] 000: Memory: 104412K/131072K available (6144K kernel code, 478K rwdata, 2832K rodata, 1024K init, 358K bss, 22564K reserved, 4096K cma-reserved, 0K highmem)
[    0.000000] 000: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] 000: rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 000: rcu:        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 000: rcu:        RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 000: rcu:        RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.000000] 000:     No expedited grace period (rcu_normal_after_boot).
[    0.000000] 000:     Tasks RCU enabled.
[    0.000000] 000: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] 000: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 000: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] 000: random: get_random_bytes called from start_kernel+0x1c7/0x318 with crng_init=0
[    0.000000] 000: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] 000: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] 000: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008791] 000: Switching to timer-based delay loop, resolution 41ns
[    0.015361] 000: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.025550] 000: Console: colour dummy device 80x30
[    0.030667] 000: Calibrating delay loop (skipped), value calculated using timer frequency..
[    0.039515] 000: 48.00 BogoMIPS (lpj=240000)
[    0.043786] 000: pid_max: default: 32768 minimum: 301
[    0.049216] 000: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.056991] 000: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.066063] 000: CPU: Testing write buffer coherency:
[    0.071276] 000: ok
[    0.073677] 000: /cpus/cpu@0 missing clock-frequency property
[    0.079446] 000: /cpus/cpu@1 missing clock-frequency property
[    0.085482] 000: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092159] 000: Setting up static identity map for 0x40100000 - 0x40100054
[    0.099261] 000: rcu: Hierarchical SRCU implementation.
[    0.105334] 000: BOOTEVENT:       105.333582: ON
[    0.110281] 000: smp: Bringing up secondary CPUs ...
[    0.116565] 001: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.122955] 000: smp: Brought up 1 node, 2 CPUs
[    0.127654] 000: SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.134618] 000: CPU: All CPU(s) started in SVC mode.
[    0.140439] 001: devtmpfs: initialized
[    0.159074] 000: VFP support v0.3:
[    0.162587] 000: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.169610] 000: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.180147] 000: futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.187743] 000: pinctrl core: initialized pinctrl subsystem
[    0.194809] 000: NET: Registered protocol family 16
[    0.202792] 000: DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.246481] 000: rtc_ccu: sunxi ccu init OK
[    0.252910] 000: ccu: sunxi ccu init OK
[    0.257163] 000: r_ccu: sunxi ccu init OK
[    0.324876] 000: Deinterlace Module initialized.
[    0.329884] 000: iommu: Default domain type: Translated
[    0.335699] 000: sunxi iommu: irq = 24
[    0.340784] 000: SCSI subsystem initialized
[    0.345915] 000: usbcore: registered new interface driver usbfs
[    0.351991] 000: usbcore: registered new interface driver hub
[    0.358156] 000: usbcore: registered new device driver usb
[    0.363946] 000: mc: Linux media interface: v0.10
[    0.368848] 000: videodev: Linux video capture interface: v2.00
[    0.376326] 000: Advanced Linux Sound Architecture Driver Initialized.
[    0.383819] 000: Bluetooth: Core ver 2.22
[    0.388113] 000: NET: Registered protocol family 31
[    0.393048] 000: Bluetooth: HCI device and connection manager initialized
[    0.399848] 000: Bluetooth: HCI socket layer initialized
[    0.405487] 000: Bluetooth: L2CAP socket layer initialized
[    0.411011] 000: Bluetooth: SCO socket layer initialized
[    0.416978] 000: pwm module init!
[    0.421929] 000: g2d 5410000.g2d: Adding to iommu group 0
[    0.428148] 000: G2D: rcq version initialized.major:249
[    0.434299] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
[    0.443923] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    0.453481] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    0.463006] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    0.472187] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL!
[    0.481940] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_iovdd supply, setting it to NULL!
[    0.491080] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL!
[    0.500181] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL!
[    0.510635] 000: clocksource: Switched to clocksource arch_sys_counter
[    0.527538] 000: sun8iw20-pinctrl pio: initialized sunXi PIO driver
[    0.548370] 000: thermal_sys: Registered thermal governor 'step_wise'
[    0.554894] 000: thermal_sys: Registered thermal governor 'user_space'
[    0.562024] 000: NET: Registered protocol family 2
[    0.567700] 001: tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 4096 bytes, linear)
[    0.576995] 001: TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.586526] 001: TCP bind hash table entries: 1024 (order: 2, 28672 bytes, linear)
[    0.594597] 001: TCP: Hash tables configured (established 1024 bind 1024)
[    0.602035] 001: UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.609114] 001: UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.617314] 001: NET: Registered protocol family 1
[    0.622988] 001: RPC: Registered named UNIX socket transport module.
[    0.629632] 001: RPC: Registered udp transport module.
[    0.635126] 001: RPC: Registered tcp transport module.
[    0.640507] 001: RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.648784] 001: sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[    0.658144] 000: spi spi0: spi0 supply spi not found, using dummy regulator
[    0.665407] 000: sunxi_spi_resource_get()2198 - [spi0] SPI MASTER MODE
[    0.672267] 000: sunxi_spi_resource_get()2236 - Failed to get sample mode
[    0.679374] 000: sunxi_spi_resource_get()2241 - Failed to get sample delay
[    0.686628] 000: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.695906] 000: sunxi_spi_clk_init()2287 - [spi0] mclk 100000000
[    0.702855] 000: sunxi_spi_probe()2700 - [spi0]: driver probe succeed, base c881f000, irq 39
[    0.713593] 000: Initialise system trusted keyrings
[    0.718691] 000: workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.741898] 000: NFS: Registering the id_resolver key type
[    0.747412] 000: Key type id_resolver registered
[    0.752105] 000: Key type id_legacy registered
[    0.756573] 000: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.763843] 000: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.771889] 000: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.779162] 000: fuse: init (API version 7.31)
[    0.811212] 001: NET: Registered protocol family 38
[    0.816296] 001: Key type asymmetric registered
[    0.821228] 001: Asymmetric key parser 'x509' registered
[    0.826628] 001: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.834699] 001: io scheduler mq-deadline registered
[    0.839891] 001: io scheduler kyber registered
[    0.844461] 001: atomic64_test: passed
[    0.850082] 001: [DISP]disp_module_init
[    0.854690] 001: disp 5000000.disp: Adding to iommu group 0
[    0.860874] 001: [DISP] parser_disp_init_para,line:1430:
[    0.866430] 001: of_property_read fb0_width fail
[    0.871319] 001: [DISP] disp_init,line:2387:
[    0.875598] 001: smooth display screen:0 type:1 mode:4
[    0.894390] 001: display_fb_request,fb_id:0
[    0.901379] 001: disp_al_manager_apply ouput_type:1
[    0.906483] 001: sunxi_pwm_enable_dual: can't parse pwm device
[    0.911274] 000: [DISP]disp_module_init finish
[    0.918152] 000: sunxi_sid_init()563 - insmod ok
[    0.923357] 000: pwm-regulator: supplied by regulator-dummy
[    0.930523] 000: sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[    0.939139] 000: uart uart0: get regulator failed
[    0.944095] 000: uart uart0: uart0 supply uart not found, using dummy regulator
[    0.952094] 000: uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.960851] 000: sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
[    0.969253] 000: printk: console [ttyS0] enabled
[    0.973945] 000: printk: bootconsole [earlycon0] disabled
[    0.000000] 000: Booting Linux on physical CPU 0x0
[    0.000000] 000: Linux version 5.4.61-rt37 (ubuntu@win) (arm-linux-gnueabi-gcc (Linaro GCC 5.3-2016.05) 5.3.1 20160412, GNU ld (Linaro_Binutils-2016.05) 2.25.0 Linaro 2016_02) #2 SMP PREEMPT_RT Wed Nov 1 00:29:07 CST 2023
[    0.000000] 000: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
[    0.000000] 000: CPU: div instructions available: patching division code
[    0.000000] 000: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] 000: OF: fdt: Machine model: sun8iw20
[    0.000000] 000: printk: bootconsole [earlycon0] enabled
[    0.000000] 000: Memory policy: Data cache writealloc
[    0.000000] 000: cma: Reserved 4 MiB at 0x47c00000
[    0.000000] 000: On node 0 totalpages: 32768
[    0.000000] 000:   Normal zone: 288 pages used for memmap
[    0.000000] 000:   Normal zone: 0 pages reserved
[    0.000000] 000:   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] 000: psci: probing for conduit method from DT.
[    0.000000] 000: psci: PSCIv1.0 detected in firmware.
[    0.000000] 000: psci: Using standard PSCI v0.2 function IDs
[    0.000000] 000: psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] 000: psci: SMC Calling Convention v1.0
[    0.000000] 000: percpu: Embedded 11 pages/cpu s15488 r8192 d21376 u45056
[    0.000000] 000: pcpu-alloc: s15488 r8192 d21376 u45056 alloc=11*4096
[    0.000000] 000: pcpu-alloc: [0] 0 [0] 1
[    0.000000] 000: Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] 000: Kernel command line: earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 rootdelay=2 loglevel=8 root=/dev/mmcblk0p5 init=/sbin/init partitions=boot-resource@mmcblk0p1:env@mmcblk0p2:env-redund@mmcblk0p3:boot@mmcblk0p4:rootfs@mmcblk0p5:dsp0@mmcblk0p6:private@mmcblk0p7:UDISK@mmcblk0p8 cma=4M snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.mode=normal androidboot.hardware=sun8iw20p1 boot_type=1 androidboot.boot_type=1 gpt=1 uboot_message=2018.05(11/01/2023-00:30:09) mbr_offset=1032192 disp_reserve=1536000,0x43f12000 androidboot.dramsize=128
[    0.000000] 000: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000000] 000: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] 000: mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] 000: Memory: 104412K/131072K available (6144K kernel code, 478K rwdata, 2832K rodata, 1024K init, 358K bss, 22564K reserved, 4096K cma-reserved, 0K highmem)
[    0.000000] 000: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] 000: rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 000: rcu:        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 000: rcu:        RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 000: rcu:        RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.000000] 000:     No expedited grace period (rcu_normal_after_boot).
[    0.000000] 000:     Tasks RCU enabled.
[    0.000000] 000: rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] 000: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 000: NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] 000: random: get_random_bytes called from start_kernel+0x1c7/0x318 with crng_init=0
[    0.000000] 000: arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] 000: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] 000: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008791] 000: Switching to timer-based delay loop, resolution 41ns
[    0.015361] 000: clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.025550] 000: Console: colour dummy device 80x30
[    0.039503] 000: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.043786] 000: pid_max: default: 32768 minimum: 301
[    0.049216] 000: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.056991] 000: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.071221] 000: CPU: Testing write buffer coherency: ok
[    0.073677] 000: /cpus/cpu@0 missing clock-frequency property
[    0.079446] 000: /cpus/cpu@1 missing clock-frequency property
[    0.085482] 000: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092159] 000: Setting up static identity map for 0x40100000 - 0x40100054
[    0.099261] 000: rcu: Hierarchical SRCU implementation.
[    0.105334] 000: BOOTEVENT:       105.333582: ON
[    0.110281] 000: smp: Bringing up secondary CPUs ...
[    0.116565] 001: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.122955] 000: smp: Brought up 1 node, 2 CPUs
[    0.127654] 000: SMP: Total of 2 processors activated (96.00 BogoMIPS).
[    0.134618] 000: CPU: All CPU(s) started in SVC mode.
[    0.140439] 001: devtmpfs: initialized
[    0.162579] 000: VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.169610] 000: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.180147] 000: futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.187743] 000: pinctrl core: initialized pinctrl subsystem
[    0.194809] 000: NET: Registered protocol family 16
[    0.202792] 000: DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.246481] 000: rtc_ccu: sunxi ccu init OK
[    0.252910] 000: ccu: sunxi ccu init OK
[    0.257163] 000: r_ccu: sunxi ccu init OK
[    0.324876] 000: Deinterlace Module initialized.
[    0.329884] 000: iommu: Default domain type: Translated
[    0.335699] 000: sunxi iommu: irq = 24
[    0.340784] 000: SCSI subsystem initialized
[    0.345915] 000: usbcore: registered new interface driver usbfs
[    0.351991] 000: usbcore: registered new interface driver hub
[    0.358156] 000: usbcore: registered new device driver usb
[    0.363946] 000: mc: Linux media interface: v0.10
[    0.368848] 000: videodev: Linux video capture interface: v2.00
[    0.376326] 000: Advanced Linux Sound Architecture Driver Initialized.
[    0.383819] 000: Bluetooth: Core ver 2.22
[    0.388113] 000: NET: Registered protocol family 31
[    0.393048] 000: Bluetooth: HCI device and connection manager initialized
[    0.399848] 000: Bluetooth: HCI socket layer initialized
[    0.405487] 000: Bluetooth: L2CAP socket layer initialized
[    0.411011] 000: Bluetooth: SCO socket layer initialized
[    0.416978] 000: pwm module init!
[    0.421929] 000: g2d 5410000.g2d: Adding to iommu group 0
[    0.428148] 000: G2D: rcq version initialized.major:249
[    0.434299] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
[    0.443923] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL!
[    0.453481] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
[    0.463006] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
[    0.472187] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_cameravdd supply, setting it to NULL!
[    0.481940] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_iovdd supply, setting it to NULL!
[    0.491080] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_avdd supply, setting it to NULL!
[    0.500181] 000: [VIN_WARN]sensor_helper_probe: cannot get sensor1_dvdd supply, setting it to NULL!
[    0.510635] 000: clocksource: Switched to clocksource arch_sys_counter
[    0.527538] 000: sun8iw20-pinctrl pio: initialized sunXi PIO driver
[    0.554813] 000: thermal_sys: Registered thermal governor 'step_wise'
[    0.561420] 000: thermal_sys: Registered thermal governor 'user_space'
[    0.562024] 000: NET: Registered protocol family 2
[    0.567700] 001: tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 4096 bytes, linear)
[    0.576995] 001: TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.586526] 001: TCP bind hash table entries: 1024 (order: 2, 28672 bytes, linear)
[    0.594597] 001: TCP: Hash tables configured (established 1024 bind 1024)
[    0.602035] 001: UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.609114] 001: UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.617314] 001: NET: Registered protocol family 1
[    0.622988] 001: RPC: Registered named UNIX socket transport module.
[    0.629632] 001: RPC: Registered udp transport module.
[    0.635126] 001: RPC: Registered tcp transport module.
[    0.640507] 001: RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.648784] 001: sun8iw20-pinctrl pio: pio supply vcc-pc not found, using dummy regulator
[    0.658144] 000: spi spi0: spi0 supply spi not found, using dummy regulator
[    0.665407] 000: sunxi_spi_resource_get()2198 - [spi0] SPI MASTER MODE
[    0.672267] 000: sunxi_spi_resource_get()2236 - Failed to get sample mode
[    0.679374] 000: sunxi_spi_resource_get()2241 - Failed to get sample delay
[    0.686628] 000: sunxi_spi_resource_get()2245 - sample_mode:-1431633921 sample_delay:-1431633921
[    0.695906] 000: sunxi_spi_clk_init()2287 - [spi0] mclk 100000000
[    0.702855] 000: sunxi_spi_probe()2700 - [spi0]: driver probe succeed, base c881f000, irq 39
[    0.713593] 000: Initialise system trusted keyrings
[    0.718691] 000: workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.741898] 000: NFS: Registering the id_resolver key type
[    0.747412] 000: Key type id_resolver registered
[    0.752105] 000: Key type id_legacy registered
[    0.756573] 000: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.763843] 000: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.771889] 000: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.779162] 000: fuse: init (API version 7.31)
[    0.811212] 001: NET: Registered protocol family 38
[    0.816296] 001: Key type asymmetric registered
[    0.821228] 001: Asymmetric key parser 'x509' registered
[    0.826628] 001: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.834699] 001: io scheduler mq-deadline registered
[    0.839891] 001: io scheduler kyber registered
[    0.844461] 001: atomic64_test: passed
[    0.850082] 001: [DISP]disp_module_init
[    0.854690] 001: disp 5000000.disp: Adding to iommu group 0
[    0.866429] 001: [DISP] parser_disp_init_para,line:1430:
[    0.866430] 001: of_property_read fb0_width fail
[    0.875597] 001: [DISP] disp_init,line:2387:
[    0.875598] 001: smooth display screen:0 type:1 mode:4
[    0.894390] 001: display_fb_request,fb_id:0
[    0.901379] 001: disp_al_manager_apply ouput_type:1
[    0.906483] 001: sunxi_pwm_enable_dual: can't parse pwm device
[    0.911274] 000: [DISP]disp_module_init finish
[    0.918152] 000: sunxi_sid_init()563 - insmod ok
[    0.923357] 000: pwm-regulator: supplied by regulator-dummy
[    0.930523] 000: sun8iw20-pinctrl pio: pio supply vcc-pe not found, using dummy regulator
[    0.939139] 000: uart uart0: get regulator failed
[    0.944095] 000: uart uart0: uart0 supply uart not found, using dummy regulator
[    0.952094] 000: uart0: ttyS0 at MMIO 0x2500000 (irq = 34, base_baud = 1500000) is a SUNXI
[    0.960851] 000: sw_console_setup()1784 - console setup baud 115200 parity n bits 8, flow n
[    0.969253] 000: printk: console [ttyS0] enabled
[    0.973945] 000: printk: bootconsole [earlycon0] disabled
[    0.980588] 000: misc dump reg init
[

env.cfg


#kernel command arguments
burn_key=0
earlyprintk=sunxi-uart,0x02500000
initcall_debug=0
console=ttyS0,115200
nand_root=/dev/ubiblock0_5
mmc_root=/dev/mmcblk0p5
mtd_name=sys
rootfstype=ext4
root_partition=rootfs
boot_partition=boot
init=/sbin/init
loglevel=8
cma=4M
mac=
wifi_mac=
bt_mac=
specialstr=
#keybox_list=widevine,ec_key,ec_cert1,ec_cert2,ec_cert3,rsa_key,rsa_cert1,rsa_cert2,rsa_cert3
dsp0_partition=dsp0
rootdelay=2
#set kernel cmdline if boot.img or recovery.img has no cmdline we will use this
setargs_nand=setenv     bootargs ubi.mtd=${mtd_name} ubi.block=0,${root_partition} earlyprintk=${earlyprintk} clk_ignore_unused initcall_debug=${initcall_debug} console=${console} loglevel=${loglevel} root=${nand_root} rootfstype=${rootfstype} init=${init} partitions=${partitions} cma=${cma} snum=${snum} mac_addr=${mac} wifi_mac=${wifi_mac} bt_mac=${bt_mac} specialstr=${specialstr} gpt=1
setargs_nand_ubi=setenv bootargs ubi.mtd=${mtd_name} ubi.block=0,${root_partition} earlyprintk=${earlyprintk} clk_ignore_unused initcall_debug=${initcall_debug} console=${console} loglevel=${loglevel} root=${nand_root} rootfstype=${rootfstype} init=${init} partitions=${partitions} cma=${cma} snum=${snum} mac_addr=${mac} wifi_mac=${wifi_mac} bt_mac=${bt_mac} specialstr=${specialstr} gpt=1
setargs_mmc=setenv      bootargs                                                   earlyprintk=${earlyprintk} clk_ignore_unused initcall_debug=${initcall_debug} console=${console} rootdelay=${rootdelay} loglevel=${loglevel} root=${mmc_root}  init=${init} partitions=${partitions} cma=${cma} snum=${snum} mac_addr=${mac} wifi_mac=${wifi_mac} bt_mac=${bt_mac} specialstr=${specialstr} gpt=1
#nand command syntax: sunxi_flash read address partition_name read_bytes
#0x4007f800 = 0x40080000(kernel entry) - 0x800(boot.img header 2k)
#boot_dsp0=sunxi_flash read 43000000 ${dsp0_partition};bootr 43000000 0 0
#boot_normal=sunxi_flash read 43000000 ${boot_partition};bootm 43000000
boot_dsp0=sunxi_flash     read 40000000 ${dsp0_partition};bootr 40000000 0 0
boot_normal=sunxi_flash   read 42000000 ${boot_partition};bootm 42000000
boot_recovery=sunxi_flash read 43000000 recovery;bootm 43000000
boot_fastboot=fastboot

#uboot system env config
bootdelay=1
#default bootcmd, will change at runtime according to key press
#default nand boot
#bootcmd=run setargs_nand boot_dsp0 boot_normal
bootcmd=run setargs_mmc boot_normal

看起来内核启动了，但到了 misc dump reg init 就卡住了，重启无数次都这样，不知是否是 rootfs 加载失败。
请教各位大神提供一下思路，非常感谢。

xsyr1024 发布的帖子